/* VIC20-specific initialization. */
int machine_specific_init(void)
{
int delay;
vic20_log = log_open("VIC20");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
/* Initialize serial traps. If user does not want them, or if the
``drive'' emulation is used, do not install them. */
if (serial_init(vic20_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
vic20_rsuser_init();
/* initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
autostart_init((CLOCK)
(delay * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
#ifdef USE_BEOS_UI
/* Pre-init VIC20-specific parts of the menus before vic_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
vic20ui_init_early();
#endif
/* Initialize the VIC-I emulation. */
if (vic_init() == NULL) {
return -1;
}
via1_init(machine_context.via1);
via2_init(machine_context.via2);
ieeevia1_init(machine_context.ieeevia1);
ieeevia2_init(machine_context.ieeevia2);
#ifndef COMMON_KBD
/* Load the default keymap file. */
if (vic20_kbd_init() < 0) {
return -1;
}
#endif
vic20_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip first */
vic_sound_chip_init();
/* Initialize the sidcart */
sidcart_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh * machine_timing.rfsh_per_sec));
/* Initialize the VIC20-specific part of the UI. */
vic20ui_init();
vic20iec_init();
cartridge_init();
#ifdef HAVE_MOUSE
mouse_init();
#ifdef HAVE_LIGHTPEN
/* Initialize lightpen support and register VIC-I callbacks */
lightpen_init();
lightpen_register_timing_callback(vic_lightpen_timing, 0);
lightpen_register_trigger_callback(vic_trigger_light_pen);
#endif
#endif
/* Register joystick callback (for lightpen triggering via fire button) */
joystick_register_machine(via2_check_lightpen);
#ifdef HAVE_MIDI
midi_init();
#endif
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICFullscreen", 1);
}
}
#endif
return 0;
}
/* VIC20-specific initialization. */
int machine_specific_init(void)
{
vic20_log = log_open("VIC20");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. If user does not want them, or if the
``drive'' emulation is used, do not install them. */
if (serial_init(vic20_serial_traps) < 0)
return -1;
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
vic20_rsuser_init();
/* initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
autostart_init((CLOCK)
(3 * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
/* Initialize the VIC-I emulation. */
if (vic_init() == NULL)
return -1;
via1_init(machine_context.via1);
via2_init(machine_context.via2);
ieeevia1_init(machine_context.ieeevia1);
ieeevia2_init(machine_context.ieeevia2);
#ifndef COMMON_KBD
/* Load the default keymap file. */
if (vic20_kbd_init() < 0)
return -1;
#endif
vic20_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh
* machine_timing.rfsh_per_sec));
/* Initialize the VIC20-specific part of the UI. */
vic20ui_init();
vic20iec_init();
machine_drive_stub();
return 0;
}
