bool flash_cmd(struct wacom_i2c *wac_i2c)
{
int rv, len;
u8 buf[10];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x32;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c,
buf, len, true);
if (rv < 0)
return false;
len = 0;
buf[len++] = 5;
buf[len++] = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 2;
buf[len++] = 2;
rv = wacom_i2c_send(wac_i2c,
buf, len, true);
if (rv < 0)
return false;
return true;
}
int flash_query(struct wacom_i2c *wac_i2c)
{
u8 command[CMD_SIZE];
u8 response[RSP_SIZE];
int ret, ECH;
int len = 0;
command[len++] = 4; /* Command Register-LSB */
command[len++] = 0; /* Command Register-MSB */
command[len++] = 0x37; /* Command-LSB, ReportType:Feature(11) ReportID:7 */
command[len++] = CMD_SET_FEATURE; /* Command-MSB, SET_REPORT */
command[len++] = 5; /* Data Register-LSB */
command[len++] = 0; /* Data-Register-MSB */
command[len++] = 5; /* Length Field-LSB */
command[len++] = 0; /* Length Field-MSB */
command[len++] = BOOT_CMD_REPORT_ID; /* Report:ReportID */
command[len++] = BOOT_QUERY; /* Report:Boot Query command */
command[len++] = ECH = 7; /* Report:echo */
ret = wacom_i2c_send(wac_i2c, command, len, WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 2 ret:%d \n", __func__, ret);
return -EXIT_FAIL_SEND_QUERY_COMMAND;
}
len = 0;
command[len++] = 4; /* Command Register-LSB */
command[len++] = 0; /* Command Register-MSB */
command[len++] = 0x38; /* Command-LSB, ReportType:Feature(11) ReportID:8 */
command[len++] = CMD_GET_FEATURE; /* Command-MSB, GET_REPORT */
command[len++] = 5; /* Data Register-LSB */
command[len++] = 0; /* Data Register-MSB */
ret = wacom_i2c_send(wac_i2c, command, len, WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 2 ret:%d \n", __func__, ret);
return -EXIT_FAIL_SEND_QUERY_COMMAND;
}
msleep(10);
ret = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 5 ret:%d \n", __func__, ret);
return -EXIT_FAIL_SEND_QUERY_COMMAND;
}
if ((response[3] != QUERY_CMD) || (response[4] != ECH)) {
printk(KERN_DEBUG"epen:%s res3:%x res4:%x \n", __func__, response[3],
response[4]);
return -EXIT_FAIL_SEND_QUERY_COMMAND;
}
if (response[5] != QUERY_RSP) {
printk(KERN_DEBUG"epen:%s res5:%x \n", __func__, response[5]);
return -EXIT_FAIL_SEND_QUERY_COMMAND;
}
return 0;
}
static void wacom_open_test(struct wacom_i2c *wac_i2c)
{
u8 cmd = 0;
u8 buf[2] = {0,};
int ret = 0, cnt = 30;
cmd = WACOM_I2C_STOP;
ret = wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0) {
printk(KERN_ERR "[E-PEN] failed to send stop command\n");
return ;
}
cmd = WACOM_I2C_GRID_CHECK;
ret = wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0) {
printk(KERN_ERR "[E-PEN] failed to send stop command\n");
goto grid_check_error;
}
cmd = WACOM_STATUS;
do {
msleep(50);
if (1 == wacom_i2c_send(wac_i2c, &cmd, 1, false)) {
if (2 == wacom_i2c_recv(wac_i2c,
buf, 2, false)) {
switch (buf[0]) {
/*
* status value
* 0 : data is not ready
* 1 : PASS
* 2 : Fail (coil function error)
* 3 : Fail (All coil function error)
*/
case 1:
case 2:
case 3:
cnt = 0;
break;
default:
break;
}
}
}
} while (cnt--);
wac_i2c->connection_check = (1 == buf[0]);
printk(KERN_DEBUG
"[E-PEN] epen_connection : %s %d\n",
(1 == buf[0]) ? "Pass" : "Fail", buf[1]);
grid_check_error:
cmd = WACOM_I2C_STOP;
wacom_i2c_send(wac_i2c, &cmd, 1, false);
cmd = WACOM_I2C_START;
wacom_i2c_send(wac_i2c, &cmd, 1, false);
}
static bool flash_blver(struct wacom_i2c *wac_i2c, int *blver)
{
u8 command[CMD_SIZE];
u8 response[RSP_SIZE];
int ret, ECH;
int len = 0;
command[len++] = 4; /* Command Register-LSB */
command[len++] = 0; /* Command Register-MSB */
command[len++] = 0x37; /* Command-LSB, ReportType:Feature(11) ReportID:7 */
command[len++] = CMD_SET_FEATURE; /* Command-MSB, SET_REPORT */
command[len++] = 5; /* Data Register-LSB */
command[len++] = 0; /* Data-Register-MSB */
command[len++] = 5; /* Length Field-LSB */
command[len++] = 0; /* Length Field-MSB */
command[len++] = BOOT_CMD_REPORT_ID; /* Report:ReportID */
command[len++] = BOOT_BLVER; /* Report:Boot Version command */
command[len++] = ECH = 7; /* Report:echo */
ret = wacom_i2c_send(wac_i2c, command, len, WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 2 ret:%d \n", __func__, ret);
return false;
}
len = 0;
command[len++] = 4; /* Command Register-LSB */
command[len++] = 0; /* Command Register-MSB */
command[len++] = 0x38; /* Command-LSB, ReportType:Feature(11) ReportID:8 */
command[len++] = CMD_GET_FEATURE; /* Command-MSB, GET_REPORT */
command[len++] = 5; /* Data Register-LSB */
command[len++] = 0; /* Data Register-MSB */
ret = wacom_i2c_send(wac_i2c, command, len, WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 4 ret:%d \n", __func__, ret);
return false;
}
msleep(10);
ret =
wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 5 ret:%d \n", __func__, ret);
return false;
}
if ((response[3] != BOOT_CMD) || (response[4] != ECH)) {
printk(KERN_DEBUG"epen:%s res[3]:%x res[4]:%x \n", __func__, response[3],
response[4]);
return false;
}
*blver = (int)response[5];
return true;
}
int wacom_i2c_flash_cmd(struct wacom_i2c *wac_i2c)
{
int ret, len;
u8 buf[8];
pr_info("wacom: %s\n", __func__);
buf[0] = 0x0d;
buf[1] = FLASH_START0;
buf[2] = FLASH_START1;
buf[3] = FLASH_START2;
buf[4] = FLASH_START3;
buf[5] = FLASH_START4;
buf[6] = FLASH_START5;
buf[7] = 0x0d;
len = 8;
ret = wacom_i2c_send(wac_i2c, buf, len, true);
if (ret < 0) {
pr_err(
"wacom: sending flash command failed 2\n");
return false;
}
msleep(270);
return 0;
}
int wacom_i2c_test(struct wacom_i2c *wac_i2c)
{
int ret, i;
char buf, test[10];
buf = COM_QUERY;
ret = wacom_i2c_send(wac_i2c, &buf, sizeof(buf), false);
if (ret > 0)
dev_info(&wac_i2c->client->dev,
"%s: buf:%d, sent:%d\n",
__func__, buf, ret);
else {
dev_err(&wac_i2c->client->dev,
"%s: Digitizer is not active\n",
__func__);
return -1;
}
ret = wacom_i2c_recv(wac_i2c, test, sizeof(test), false);
if (ret >= 0) {
for (i = 0; i < 8; i++)
dev_info(&wac_i2c->client->dev,
"%s: %d\n", __func__, test[i]);
} else {
dev_err(&wac_i2c->client->dev,
"%s: Digitizer does not reply\n",
__func__);
return -1;
}
return 0;
}
static bool flash_end(struct wacom_i2c *wac_i2c)
{
u8 command[CMD_SIZE];
int ret, ECH;
int len = 0;
command[len++] = 4;
command[len++] = 0;
command[len++] = 0x37;
command[len++] = CMD_SET_FEATURE;
command[len++] = 5;
command[len++] = 0;
command[len++] = 5;
command[len++] = 0;
command[len++] = BOOT_CMD_REPORT_ID;
command[len++] = BOOT_EXIT;
command[len++] = ECH = 7;
ret = wacom_i2c_send(wac_i2c, command, len, WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 2 ret:%d \n", __func__, ret);
return false;
}
msleep(200);
return true;
}
int wacom_i2c_test(struct wacom_i2c *wac_i2c)
{
int ret, i;
char buf, test[10];
buf = COM_QUERY;
ret = wacom_i2c_send(wac_i2c, &buf, sizeof(buf), false);
if (ret > 0)
printk(KERN_INFO "[E-PEN] buf:%d, sent:%d\n", buf, ret);
else {
printk(KERN_ERR "[E-PEN] Digitizer is not active\n");
return -1;
}
ret = wacom_i2c_recv(wac_i2c, test, sizeof(test), false);
if (ret >= 0) {
for (i = 0; i < 8; i++)
printk(KERN_INFO "[E-PEN] %d\n", test[i]);
} else {
printk(KERN_ERR "[E-PEN] Digitizer does not reply\n");
return -1;
}
return 0;
}
int wacom_checksum(struct wacom_i2c *wac_i2c)
{
int ret = 0, retry = 10;
int i = 0;
u8 buf[5] = {0, };
buf[0] = COM_CHECKSUM;
while (retry--) {
ret = wacom_i2c_send(wac_i2c, &buf[0], 1, false);
if (ret < 0) {
printk(KERN_DEBUG
"[E-PEN] i2c fail, retry, %d\n",
__LINE__);
continue;
}
msleep(200);
ret = wacom_i2c_recv(wac_i2c, buf, 5, false);
if (ret < 0) {
printk(KERN_DEBUG
"[E-PEN] i2c fail, retry, %d\n",
__LINE__);
continue;
} else if (buf[0] == 0x1f)
break;
printk(KERN_DEBUG "[E-PEN] checksum retry\n");
}
if (ret >= 0) {
printk(KERN_DEBUG
"[E-PEN] received checksum %x, %x, %x, %x, %x\n",
buf[0], buf[1], buf[2], buf[3], buf[4]);
}
for (i = 0; i < 5; ++i) {
if (buf[i] != Firmware_checksum[i]) {
printk(KERN_DEBUG
"[E-PEN] checksum fail %dth %x %x\n", i,
buf[i], Firmware_checksum[i]);
break;
}
}
wac_i2c->checksum_result = (5 == i);
#ifdef WACOM_CONNECTION_CHECK
if (!wac_i2c->connection_check)
wacom_open_test(wac_i2c);
#endif
return ret;
}
int wacom_checksum(struct wacom_i2c *wac_i2c)
{
int ret = 0, retry = 10;
int i = 0;
u8 buf[5] = {0, };
buf[0] = COM_CHECKSUM;
while (retry--) {
ret = wacom_i2c_send(wac_i2c, &buf[0], 1, false);
if (ret < 0) {
dev_err(&wac_i2c->client->dev,
"%s: i2c fail, retry, %d\n",
__func__, __LINE__);
continue;
}
msleep(200);
ret = wacom_i2c_recv(wac_i2c, buf, 5, false);
if (ret < 0) {
dev_err(&wac_i2c->client->dev,
"%s: i2c fail, retry, %d\n",
__func__, __LINE__);
continue;
} else if (buf[0] == 0x1f)
break;
dev_info(&wac_i2c->client->dev,
"%s: checksum retry\n",
__func__);
}
if (ret >= 0) {
dev_info(&wac_i2c->client->dev,
"%s: received checksum %x, %x, %x, %x, %x\n",
__func__, buf[0], buf[1],
buf[2], buf[3], buf[4]);
}
for (i = 0; i < 5; ++i) {
if (buf[i] != Firmware_checksum[i]) {
dev_info(&wac_i2c->client->dev,
"%s: checksum fail %dth %x %x\n",
__func__, i, buf[i],
Firmware_checksum[i]);
break;
}
}
wac_i2c->checksum_result = (5 == i);
return ret;
}
bool flash_devcieType(struct wacom_i2c *wac_i2c)
{
int rv;
u8 buf[4];
u16 len;
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x32;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
rv = wacom_i2c_recv(wac_i2c, buf, 4, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
return true;
}
static bool flash_write_block(struct wacom_i2c *wac_i2c, char *flash_data,
unsigned long ulAddress, u8 * pcommand_id,
int *ECH)
{
const int MAX_COM_SIZE = (16 + FLASH_BLOCK_SIZE + 2); //16: num of command[0] to command[15]
//FLASH_BLOCK_SIZE: unit to erase the block
//Num of Last 2 checksums
u8 command[300];
unsigned char sum = 0;
int ret, i;
command[0] = 4; /* Command Register-LSB */
command[1] = 0; /* Command Register-MSB */
command[2] = 0x37; /* Command-LSB, ReportType:Feature(11) ReportID:7 */
command[3] = CMD_SET_FEATURE; /* Command-MSB, SET_REPORT */
command[4] = 5; /* Data Register-LSB */
command[5] = 0; /* Data-Register-MSB */
command[6] = 76; /* Length Field-LSB */
command[7] = 0; /* Length Field-MSB */
command[8] = BOOT_CMD_REPORT_ID; /* Report:ReportID */
command[9] = BOOT_WRITE_FLASH; /* Report:program command */
command[10] = *ECH = ++(*pcommand_id); /* Report:echo */
command[11] = ulAddress & 0x000000ff;
command[12] = (ulAddress & 0x0000ff00) >> 8;
command[13] = (ulAddress & 0x00ff0000) >> 16;
command[14] = (ulAddress & 0xff000000) >> 24; /* Report:address(4bytes) */
command[15] = 8; /* Report:size(8*8=64) */
sum = 0;
for (i = 4; i < 16; i++)
sum += command[i];
command[MAX_COM_SIZE - 2] = ~sum + 1; /* Report:command checksum */
sum = 0;
for (i = 16; i < (FLASH_BLOCK_SIZE + 16); i++) {
command[i] = flash_data[ulAddress + (i - 16)];
sum += flash_data[ulAddress + (i - 16)];
}
command[MAX_COM_SIZE - 1] = ~sum + 1; /* Report:data checksum */
ret =
wacom_i2c_send(wac_i2c, command, (BOOT_CMD_SIZE + 4),
WACOM_I2C_MODE_BOOT);
if (ret < 0) {
printk(KERN_DEBUG"epen:%s 1 ret:%d \n", __func__, ret);
return false;
}
return true;
}
static bool flash_end(struct wacom_i2c *wac_i2c)
{
int rv, ECH;
unsigned char command[CMD_SIZE];
command[0] = 4;
command[1] = 0;
command[2] = 0x37;
command[3] = CMD_SET_FEATURE;
command[4] = 5;
command[5] = 0;
command[6] = 5;
command[7] = 0;
command[8] = BOOT_CMD_REPORT_ID;
command[9] = BOOT_EXIT;
command[10] = ECH = 7;
#if defined(CONFIG_EPEN_WACOM_G9PLL) || defined(CONFIG_EPEN_WACOM_G10PM) \
|| defined(CONFIG_EPEN_WACOM_W9012)
rv = wacom_i2c_send(wac_i2c, command, 11, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG"epen:%s 2 rv:%d \n", __func__, rv);
return false;
}
#elif defined(CONFIG_EPEN_WACOM_G9PL)
rv = wacom_i2c_send(wac_i2c, command, 4, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
rv = wacom_i2c_send(wac_i2c, command + 4, 7, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
#endif
return true;
}
bool flash_end(struct wacom_i2c *wac_i2c)
{
int rv, ECH;
u8 buf[4];
u16 len;
unsigned char command[CMD_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 5;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_EXIT;
command[6] = ECH = 7;
rv = wacom_i2c_send(wac_i2c, command, 7, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
return true;
}
int wacom_checksum(struct wacom_i2c *wac_i2c)
{
int ret = 0, retry = 10;
int i = 0;
u8 buf[5] = {0, };
buf[0] = COM_CHECKSUM;
while (retry--) {
ret = wacom_i2c_send(wac_i2c, &buf[0], 1, false);
if (ret < 0) {
printk(KERN_DEBUG
"epen:i2c fail, retry, %d\n",
__LINE__);
continue;
}
msleep(200);
ret = wacom_i2c_recv(wac_i2c, buf, 5, false);
if (ret < 0) {
printk(KERN_DEBUG
"epen:i2c fail, retry, %d\n",
__LINE__);
continue;
} else if (buf[0] == 0x1f)
break;
printk(KERN_DEBUG "epen:checksum retry\n");
}
if (ret >= 0) {
printk(KERN_DEBUG
"epen:received checksum %x, %x, %x, %x, %x\n",
buf[0], buf[1], buf[2], buf[3], buf[4]);
}
for (i = 0; i < 5; ++i) {
if (buf[i] != fw_chksum[i]) {
printk(KERN_DEBUG
"epen:checksum fail %dth %x %x\n", i,
buf[i], fw_chksum[i]);
break;
}
}
wac_i2c->checksum_result = (5 == i);
return ret;
}
int wacom_i2c_modecheck(struct wacom_i2c *wac_i2c)
{
u8 buf = COM_QUERY;
int ret;
int mode = WACOM_I2C_MODE_NORMAL;
ret = wacom_i2c_send(wac_i2c, &buf, 1, false);
if (ret < 0) {
mode = WACOM_I2C_MODE_BOOT;
}
else{
mode = WACOM_I2C_MODE_NORMAL;
}
printk(KERN_DEBUG "epen:I2C send at usermode(%d)\n", ret);
return mode;
}
static void wac_statecheck_work(struct work_struct *work)
{
int ret, i;
char buf, test[10];
struct wacom_i2c *wac_i2c =
container_of(work, struct wacom_i2c, wac_statecheck_work.work);
buf = COM_QUERY;
printk(KERN_DEBUG "epen:%s\n", __func__);
if (wake_lock_active(&wac_i2c->wakelock))
return;
#ifdef BATTERY_SAVING_MODE
if (wac_i2c->battery_saving_mode
&& wac_i2c->pen_insert) {
printk(KERN_DEBUG "epen:escaped from wacom check mode\n");
printk(KERN_DEBUG " becase pen has inserted at lpm\n");
return;
}
#endif
#if defined(CONFIG_TARGET_LOCALE_KOR)
#if defined(CONFIG_MACH_T0) && defined(CONFIG_TDMB_ANT_DET)
ret = gpio_get_value(wac_i2c->wac_pdata->gpio_esd_check);
if (ret == 0) {
printk(KERN_DEBUG "epen:skip wacom state checking\n");
printk(KERN_DEBUG " becase ANT has closed\n");
schedule_delayed_work(&wac_i2c->wac_statecheck_work, HZ * 30);
return;
}
#endif
#endif
ret = wacom_i2c_send(wac_i2c, &buf, sizeof(buf), false);
if (ret > 0)
printk(KERN_INFO "epen:buf:%d, sent:%d\n", buf, ret);
else {
printk(KERN_ERR "epen:Digitizer is not active\n");
wac_i2c->wac_pdata->suspend_platform_hw();
msleep(200);
wacom_power_on(wac_i2c);
printk(KERN_ERR "epen:wacom reset done\n");
}
schedule_delayed_work(&wac_i2c->wac_statecheck_work, HZ * 30);
}
static ssize_t epen_sampling_rate_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct wacom_i2c *wac_i2c = dev_get_drvdata(dev);
int value;
char mode;
if (sscanf(buf, "%d", &value) == 1) {
switch (value) {
case 0:
mode = COM_SAMPLERATE_STOP;
break;
case 40:
mode = COM_SAMPLERATE_40;
break;
case 80:
mode = COM_SAMPLERATE_80;
break;
case 133:
mode = COM_SAMPLERATE_133;
break;
default:
pr_err("epen:Invalid sampling rate value\n");
count = -1;
goto fail;
}
wacom_enable_irq(wac_i2c, false);
if (1 == wacom_i2c_send(wac_i2c, &mode, 1, false)) {
printk(KERN_DEBUG "epen:sampling rate %d\n", value);
msleep(100);
} else {
pr_err("epen:I2C write error\n");
wacom_enable_irq(wac_i2c, true);
count = -1;
}
wacom_enable_irq(wac_i2c, true);
} else {
pr_err("epen:can't get sampling rate data\n");
count = -1;
}
fail:
return count;
}
static bool flash_security_unlock(struct wacom_i2c *wac_i2c, int *status)
{
int rv, ECH;
u8 buf[4];
u16 len;
unsigned char command[CMD_SIZE];
unsigned char response[RSP_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 5;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_SECURITY_UNLOCK;
command[6] = ECH = 7;
rv = wacom_i2c_send(wac_i2c, command, 7, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
usleep_range(10000, 10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return 0;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
usleep_range(1000, 1000);
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:5 rv:%d\n", rv);
return false;
}
if ((response[3] != SEC_CMD) || (response[4] != ECH))
return false;
*status = (int)response[5];
return true;
}
bool flash_query(struct wacom_i2c *wac_i2c)
{
int rv, ECH;
u8 buf[4];
u16 len;
unsigned char command[CMD_SIZE];
unsigned char response[RSP_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
pr_info(
"wacom: %s started buf[3]:%d len:%d\n",
__func__, buf[3], len);
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 5;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_QUERY;
command[6] = ECH = 7;
rv = wacom_i2c_send(wac_i2c, command, 7, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
usleep(10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
rv = wacom_i2c_recv(wac_i2c, response,
BOOT_RSP_SIZE, false);
if (rv < 0) {
pr_err("wacom: %s(%d) %d\n",
__func__, rv, __LINE__);
return false;
}
if ((response[3] != QUERY_CMD) ||
(response[4] != ECH)) {
pr_err("wacom: %s res3:%d res4:%d\n", __func__,
response[3], response[4]);
return false;
}
if (response[5] != QUERY_RSP) {
pr_err("wacom: %s res5:%d\n", __func__, response[5]);
return false;
}
return true;
}
static ssize_t epen_connection_show(struct device *dev,
struct device_attribute *attr,
char *buff)
{
struct wacom_i2c *wac_i2c = dev_get_drvdata(dev);
u8 cmd = 0;
u8 buf[2] = {0,};
int ret = 0, cnt = 10;
disable_irq(wac_i2c->client->irq);
cmd = WACOM_I2C_STOP;
ret = wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0) {
dev_err(&wac_i2c->client->dev,
"%s: failed to send stop command\n",
__func__);
goto grid_check_error;
}
cmd = WACOM_I2C_GRID_CHECK;
ret = wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0) {
dev_err(&wac_i2c->client->dev,
"%s: failed to send stop command\n",
__func__);
goto grid_check_error;
}
cmd = WACOM_STATUS;
do {
msleep(50);
if (1 == wacom_i2c_send(wac_i2c, &cmd, 1, false)) {
if (2 == wacom_i2c_recv(wac_i2c,
buf, 2, false)) {
switch (buf[0]) {
/*
* status value
* 0 : data is not ready
* 1 : PASS
* 2 : Fail (coil function error)
* 3 : Fail (All coil function error)
*/
case 1:
case 2:
case 3:
cnt = 0;
break;
default:
break;
}
}
}
} while (cnt--);
dev_info(&wac_i2c->client->dev,
"%s : status: %x, error code: %x\n",
__func__, buf[0], buf[1]);
grid_check_error:
cmd = WACOM_I2C_STOP;
ret = wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0)
dev_err(&wac_i2c->client->dev,
"%s: failed to send stop command\n",
__func__);
cmd = WACOM_I2C_START;
wacom_i2c_send(wac_i2c, &cmd, 1, false);
if (ret <= 0)
dev_err(&wac_i2c->client->dev,
"%s: failed to send stop command\n",
__func__);
enable_irq(wac_i2c->client->irq);
if ((buf[0] == 0x1) && (buf[1] == 0))
return sprintf(buff, "%s\n", "OK");
else
return sprintf(buff, "%s\n", "NG");
}
static bool flash_verify(struct wacom_i2c *wac_i2c,
unsigned char *flash_data, size_t data_size,
unsigned long start_address,
unsigned long *max_address, int mpuType)
{
int ECH;
unsigned long ulAddress;
bool rv;
unsigned long pageNo = 0;
u8 command_id = 0;
printk(KERN_DEBUG "epen:verify starts\n");
for (ulAddress = start_address; ulAddress < *max_address;
ulAddress += FLASH_BLOCK_SIZE) {
const int MAX_CMD_SIZE = 12 + FLASH_BLOCK_SIZE + 2;
unsigned char buf[300];
unsigned char sum;
int len;
unsigned int i, j;
unsigned char command[MAX_CMD_SIZE];
unsigned char response[RSP_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 76;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_VERIFY_FLASH;
command[6] = ECH = ++command_id;
command[7] = ulAddress & 0x000000ff;
command[8] = (ulAddress & 0x0000ff00) >> 8;
command[9] = (ulAddress & 0x00ff0000) >> 16;
command[10] = (ulAddress & 0xff000000) >> 24;
command[11] = 8;
sum = 0;
for (j = 0; j < 12; j++)
sum += command[j];
command[MAX_CMD_SIZE - 2] = ~sum + 1;
sum = 0;
for (i = 12; i < (FLASH_BLOCK_SIZE + 12); i++) {
command[i] = flash_data[ulAddress + (i - 12)];
sum += flash_data[ulAddress + (i - 12)];
}
command[MAX_CMD_SIZE - 1] = ~sum + 1;
rv = wacom_i2c_send(wac_i2c, command, BOOT_CMD_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
if (ulAddress <= 0x0ffff)
ndelay(250000);
else if (ulAddress >= 0x10000 && ulAddress <= 0x20000)
ndelay(350000);
else
usleep_range(10000, 10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:5 rv:%d\n", rv);
return false;
}
if ((response[3] != VERIFY_CMD) ||
(response[4] != ECH) || (response[5] != ACK)) {
printk(KERN_DEBUG "epen:res3:%d res4:%d res5:%d\n",
response[3], response[4], response[5]);
return false;
}
pageNo++;
}
return true;
}
static bool flash_query(struct wacom_i2c *wac_i2c)
{
int rv, ECH;
u8 buf[4];
u16 len;
unsigned char command[CMD_SIZE];
unsigned char response[RSP_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
printk(KERN_DEBUG "epen:%s\n", __func__);
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 5;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_QUERY;
command[6] = ECH = 7;
rv = wacom_i2c_send(wac_i2c, command, 7, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
#ifdef CONFIG_EPEN_WACOM_G9PL
usleep_range(10000, 10000);
#endif
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:5 rv:%d\n", rv);
return false;
}
if ((response[3] != QUERY_CMD) || (response[4] != ECH)) {
printk(KERN_DEBUG "epen:res3:%d res4:%d\n", response[3],
response[4]);
return false;
}
if (response[5] != QUERY_RSP) {
printk(KERN_DEBUG "epen:res5:%d\n", response[5]);
return false;
}
return true;
}
int wacom_i2c_query(struct wacom_i2c *wac_i2c)
{
struct wacom_features *wac_feature = wac_i2c->wac_feature;
int ret;
u8 buf;
u8 data[9] = {0, };
int i = 0;
int query_limit = 10;
buf = COM_QUERY;
for (i = 0; i < query_limit; i++) {
ret = wacom_i2c_send(wac_i2c, &buf, 1, false);
if (ret < 0) {
printk(KERN_ERR"[E-PEN] I2C send failed(%d)\n", ret);
continue;
}
msleep(100);
ret = wacom_i2c_recv(wac_i2c, data, COM_QUERY_NUM, false);
if (ret < 0) {
printk(KERN_ERR"[E-PEN] I2C recv failed(%d)\n", ret);
continue;
}
printk(KERN_INFO "[E-PEN] %s: %dth ret of wacom query=%d\n",
__func__, i, ret);
if (COM_QUERY_NUM == ret) {
if (0x0f == data[0]) {
wac_feature->fw_version =
((u16) data[7] << 8) + (u16) data[8];
break;
} else {
printk(KERN_NOTICE
"[E-PEN] %X, %X, %X, %X, %X, %X, %X, fw=0x%x\n",
data[0], data[1], data[2], data[3],
data[4], data[5], data[6],
wac_feature->fw_version);
}
}
}
#if defined(CONFIG_MACH_Q1_BD)\
|| defined(CONFIG_MACH_P4NOTE)\
|| defined(CONFIG_MACH_T0)
wac_feature->x_max = (u16) WACOM_MAX_COORD_X;
wac_feature->y_max = (u16) WACOM_MAX_COORD_Y;
#else
wac_feature->x_max = ((u16) data[1] << 8) + (u16) data[2];
wac_feature->y_max = ((u16) data[3] << 8) + (u16) data[4];
#endif
wac_feature->pressure_max = (u16) data[6] + ((u16) data[5] << 8);
#if defined(COOR_WORK_AROUND)
if (i == 10 || ret < 0) {
printk(KERN_NOTICE "[E-PEN] COOR_WORK_AROUND is applied\n");
printk(KERN_NOTICE
"[E-PEN] %X, %X, %X, %X, %X, %X, %X, %X, %X\n", data[0],
data[1], data[2], data[3], data[4], data[5], data[6],
data[7], data[8]);
wac_feature->x_max = (u16) WACOM_MAX_COORD_X;
wac_feature->y_max = (u16) WACOM_MAX_COORD_Y;
wac_feature->pressure_max = (u16) WACOM_MAX_PRESSURE;
#ifdef CONFIG_MACH_T0
wac_feature->fw_version = 0;
#else
wac_feature->fw_version = 0xFF;
#endif
}
#endif
printk(KERN_NOTICE "[E-PEN] x_max=0x%X\n", wac_feature->x_max);
printk(KERN_NOTICE "[E-PEN] y_max=0x%X\n", wac_feature->y_max);
printk(KERN_NOTICE "[E-PEN] pressure_max=0x%X\n",
wac_feature->pressure_max);
printk(KERN_NOTICE "[E-PEN] fw_version=0x%X (d7:0x%X,d8:0x%X)\n",
wac_feature->fw_version, data[7], data[8]);
printk(KERN_NOTICE "[E-PEN] %X, %X, %X, %X, %X, %X, %X, %X, %X\n",
data[0], data[1], data[2], data[3], data[4], data[5], data[6],
data[7], data[8]);
if ((i == 10) && (ret < 0)) {
printk(KERN_DEBUG"[E-PEN] %s, failed\n", __func__);
wac_i2c->query_status = false;
return ret;
}
wac_i2c->query_status = true;
#if defined(CONFIG_MACH_P4NOTE)
wacom_checksum(wac_i2c);
#endif
return 0;
}
static bool flash_blver(struct wacom_i2c *wac_i2c, int *blver)
{
int rv, ECH;
u8 buf[4];
u16 len;
unsigned char command[CMD_SIZE];
unsigned char response[RSP_SIZE];
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 5;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_BLVER;
command[6] = ECH = 7;
rv = wacom_i2c_send(wac_i2c, command, 7, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
usleep_range(10000, 10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
#ifdef CONFIG_EPEN_WACOM_G9PL
usleep_range(10000, 10000);
#else
usleep_range(1000, 1000);
#endif
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:5 rv:%d\n", rv);
return false;
}
if ((response[3] != BOOT_CMD) || (response[4] != ECH))
return false;
*blver = (int)response[5];
return true;
}
static bool flash_erase(struct wacom_i2c *wac_i2c,
int *eraseBlock, int num)
{
int rv, ECH;
unsigned char sum;
unsigned char buf[72];
unsigned char cmd_chksum;
u16 len;
int i, j;
unsigned char command[CMD_SIZE];
unsigned char response[RSP_SIZE];
for (i = 0; i < num; i++) {
/*msleep(500);*/
retry:
if (epen_debug)
printk(KERN_DEBUG"epen:erase count %d\n", i);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:failing 1:%d\n", i);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 7;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_ERASE_FLASH;
command[6] = ECH = i;
command[7] = *eraseBlock;
eraseBlock++;
sum = 0;
for (j = 0; j < 8; j++)
sum += command[j];
cmd_chksum = ~sum + 1;
command[8] = cmd_chksum;
rv = wacom_i2c_send(wac_i2c, command, 9, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:failing 2:%d\n", i);
return false;
}
#ifdef CONFIG_EPEN_WACOM_G9PL
switch (i) {
case 0:
case 1:
msleep(3000);
break;
case 2:
msleep(5000);
break;
case 3:
msleep(500);
break;
default:
msleep(5000);
break;
}
#else
msleep(300);
#endif
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:failing 3:%d\n", i);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:failing 4:%d\n", i);
return false;
}
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:failing 5:%d\n", i);
return false;
}
if ((response[3] != ERS_CMD) || (response[4] != ECH)) {
printk(KERN_DEBUG "epen:failing 6:%d\n", i);
return false;
}
if (response[5] == 0x80) {
printk(KERN_DEBUG "epen:retry\n");
goto retry;
}
if (response[5] != ACK) {
printk(KERN_DEBUG "epen:failing 7:%d res5:%d\n", i,
response[5]);
return false;
}
}
return true;
}
static int wacom_flash_cmd(struct wacom_i2c *wac_i2c)
{
int rv, len;
u8 buf[10];
#if defined(CONFIG_EPEN_WACOM_G9PL) \
|| defined(CONFIG_EPEN_WACOM_G9PLL) \
|| defined(CONFIG_EPEN_WACOM_G10PM) \
|| defined(CONFIG_EPEN_WACOM_W9012)
buf[0] = 0x0d;
buf[1] = FLASH_START0;
buf[2] = FLASH_START1;
buf[3] = FLASH_START2;
buf[4] = FLASH_START3;
buf[5] = FLASH_START4;
buf[6] = FLASH_START5;
buf[7] = 0x0d;
len = 8;
rv = i2c_master_send(wac_i2c->client, buf, len);
#else
int i;
bool i2c_mode = WACOM_I2C_MODE_BOOT;
for (i = 0; i < 2; ++i) {
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x32;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, i2c_mode);
if (rv < 0) {
printk(KERN_DEBUG "epen:fail change to normal:%d\n",
rv);
i2c_mode = WACOM_I2C_MODE_NORMAL;
continue;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 2;
buf[len++] = 2;
rv = wacom_i2c_send(wac_i2c, buf, len, i2c_mode);
if (rv < 0) {
printk(KERN_DEBUG "epen:fail change to normal:%d\n",
rv);
i2c_mode = WACOM_I2C_MODE_NORMAL;
continue;
}
}
#endif
if (rv < 0) {
printk(KERN_ERR
"Sending flash command failed\n");
return -1;
}
printk(KERN_DEBUG "epen:flash cmd sent:%d\n", rv);
msleep(500);
return 0;
}
static bool is_flash_marking(struct wacom_i2c *wac_i2c,
size_t data_size, bool *bMarking, int iMpuID)
{
const int MAX_CMD_SIZE = (12 + FLASH_BLOCK_SIZE + 2);
int rv, ECH;
unsigned char flash_data[FLASH_BLOCK_SIZE];
unsigned char buf[300];
unsigned char sum;
int len;
unsigned int i, j;
unsigned char response[RSP_SIZE];
unsigned char command[MAX_CMD_SIZE];
*bMarking = false;
printk(KERN_DEBUG "epen:started\n");
for (i = 0; i < FLASH_BLOCK_SIZE; i++)
flash_data[i] = 0xFF;
flash_data[56] = 0x00;
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
command[0] = 5;
command[1] = 0;
command[2] = 76;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_VERIFY_FLASH;
command[6] = ECH = 1;
command[7] = 0xC0;
command[8] = 0x1F;
command[9] = 0x01;
command[10] = 0x00;
command[11] = 8;
sum = 0;
for (j = 0; j < 12; j++)
sum += command[j];
command[MAX_CMD_SIZE - 2] = ~sum + 1;
sum = 0;
printk(KERN_DEBUG "epen:start writing command\n");
for (i = 12; i < (FLASH_BLOCK_SIZE + 12); i++) {
command[i] = flash_data[i - 12];
sum += flash_data[i - 12];
}
command[MAX_CMD_SIZE - 1] = ~sum + 1;
printk(KERN_DEBUG "epen:sending command\n");
rv = wacom_i2c_send(wac_i2c, command, MAX_CMD_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
usleep_range(10000, 10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
rv = wacom_i2c_recv(wac_i2c, response, RSP_SIZE, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:5 rv:%d\n", rv);
return false;
}
printk(KERN_DEBUG "epen:checking response\n");
if ((response[3] != MARK_CMD) ||
(response[4] != ECH) || (response[5] != ACK)) {
printk(KERN_DEBUG "epen:fails res3:%d res4:%d res5:%d\n",
response[3], response[4], response[5]);
return false;
}
*bMarking = true;
return true;
}
int wacom_i2c_query(struct wacom_i2c *wac_i2c)
{
struct wacom_features *wac_feature = wac_i2c->wac_feature;
int ret;
u8 buf;
u8 data[COM_QUERY_NUM] = {0, };
int i = 0;
const int query_limit = 3;
buf = COM_QUERY;
dev_info(&wac_i2c->client->dev,
"%s: start\n", __func__);
for (i = 0; i < query_limit; i++) {
ret = wacom_i2c_send(wac_i2c, &buf, 1, false);
if (ret < 0) {
dev_err(&wac_i2c->client->dev,
"%s: I2C send failed(%d)\n",
__func__, ret);
continue;
}
msleep(100);
ret = wacom_i2c_recv(wac_i2c, data, COM_QUERY_NUM, false);
if (ret < 0) {
dev_err(&wac_i2c->client->dev,
"%s: I2C recv failed(%d)\n",
__func__, ret);
continue;
}
dev_info(&wac_i2c->client->dev,
"%s: %dth ret of wacom query=%d\n",
__func__, i, ret);
if (COM_QUERY_NUM != ret) {
dev_info(&wac_i2c->client->dev,
"%s: epen:failed to read i2c(%d)\n",
__func__, ret);
continue;
}
if (0x0f == data[0]) {
wac_feature->fw_ic_version =
((u16) data[7] << 8) + (u16) data[8];
break;
} else {
dev_info(&wac_i2c->client->dev,
"%s: %X, %X, %X, %X, %X, %X, %X, fw=0x%x\n",
__func__,
data[0], data[1], data[2], data[3],
data[4], data[5], data[6],
wac_feature->fw_ic_version);
}
}
wac_feature->x_max = wac_i2c->wac_pdata->max_x;
wac_feature->y_max = wac_i2c->wac_pdata->max_y;
wac_feature->pressure_max = (u16) data[6] + ((u16) data[5] << 8);
#if defined(COOR_WORK_AROUND)
if (i == 10 || ret < 0) {
dev_info(&wac_i2c->client->dev,
"%s: COOR_WORK_AROUND is applied\n",
__func__);
dev_info(&wac_i2c->client->dev,
"%s: %X, %X, %X, %X, %X, %X, %X, %X, %X\n",
__func__, data[0], data[1], data[2],
data[3], data[4], data[5], data[6],
data[7], data[8]);
wac_feature->x_max = (u16) wac_i2c->wac_pdata->max_x;
wac_feature->y_max = (u16) wac_i2c->wac_pdata->max_y;
wac_feature->pressure_max = (u16) wac_i2c->wac_pdata->max_pressure;
wac_feature->fw_ic_version = 0;
}
#endif
dev_info(&wac_i2c->client->dev,
"%s: x_max=0x%X, y_max=0x%X\n, pressure_max=0x%X",
__func__, wac_feature->x_max,
wac_feature->y_max,
wac_feature->pressure_max);
dev_info(&wac_i2c->client->dev,
"%s: fw_version=0x%X (d7:0x%X,d8:0x%X)\n",
__func__, wac_feature->fw_version,
data[7], data[8]);
dev_info(&wac_i2c->client->dev,
"%s: %X, %X, %X, %X, %X, %X, %X, %X, %X\n",
__func__, data[0], data[1], data[2],
data[3], data[4], data[5], data[6],
data[7], data[8]);
if ((i == query_limit) && (ret < 0)) {
dev_info(&wac_i2c->client->dev,
"%s: failed\n", __func__);
wac_i2c->query_status = false;
return ret;
}
wac_i2c->query_status = true;
return wac_feature->fw_ic_version;
}
static bool flash_write_block(struct wacom_i2c *wac_i2c, char *flash_data,
unsigned long ulAddress, u8 *pcommand_id)
{
const int MAX_COM_SIZE = (12 + FLASH_BLOCK_SIZE + 2);
int len, ECH;
unsigned char buf[300];
int rv;
unsigned char sum;
unsigned char command[MAX_COM_SIZE];
unsigned char response[RSP_SIZE];
unsigned int i;
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x37;
buf[len++] = CMD_SET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0)
return false;
command[0] = 5;
command[1] = 0;
command[2] = 76;
command[3] = 0;
command[4] = BOOT_CMD_REPORT_ID;
command[5] = BOOT_WRITE_FLASH;
command[6] = ECH = ++(*pcommand_id);
command[7] = ulAddress & 0x000000ff;
command[8] = (ulAddress & 0x0000ff00) >> 8;
command[9] = (ulAddress & 0x00ff0000) >> 16;
command[10] = (ulAddress & 0xff000000) >> 24;
command[11] = 8;
sum = 0;
for (i = 0; i < 12; i++)
sum += command[i];
command[MAX_COM_SIZE - 2] = ~sum + 1;
sum = 0;
for (i = 12; i < (FLASH_BLOCK_SIZE + 12); i++) {
command[i] = flash_data[ulAddress + (i - 12)];
sum += flash_data[ulAddress + (i - 12)];
}
command[MAX_COM_SIZE - 1] = ~sum + 1;
rv = wacom_i2c_send(wac_i2c, command, BOOT_CMD_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:1 rv:%d\n", rv);
return false;
}
usleep_range(10000, 10000);
len = 0;
buf[len++] = 4;
buf[len++] = 0;
buf[len++] = 0x38;
buf[len++] = CMD_GET_FEATURE;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:2 rv:%d\n", rv);
return false;
}
len = 0;
buf[len++] = 5;
buf[len++] = 0;
rv = wacom_i2c_send(wac_i2c, buf, len, WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:3 rv:%d\n", rv);
return false;
}
rv = wacom_i2c_recv(wac_i2c, response, BOOT_RSP_SIZE,
WACOM_I2C_MODE_BOOT);
if (rv < 0) {
printk(KERN_DEBUG "epen:4 rv:%d\n", rv);
return false;
}
if ((response[3] != WRITE_CMD) ||
(response[4] != ECH) || response[5] != ACK)
return false;
return true;
}