/*************************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
#if !defined(CONFIG_NAND_SPL)
ulong speed = get_bus_freq(0);
#else
ulong speed = 133333333; /* 133MHz is on the safe side */
#endif
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030602);
mtsdram(DDR0_04, 0x0A020200);
mtsdram(DDR0_05, 0x02020308);
mtsdram(DDR0_06, 0x0102C812);
mtsdram(DDR0_07, 0x000D0100);
mtsdram(DDR0_08, 0x02430001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000300);
mtsdram(DDR0_11, 0x0027C800);
mtsdram(DDR0_12, 0x00000003);
mtsdram(DDR0_14, 0x00000000);
mtsdram(DDR0_17, 0x19000000);
mtsdram(DDR0_18, 0x19191919);
mtsdram(DDR0_19, 0x19191919);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
mtsdram(DDR0_22, 0x00267F0B);
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01010002);
if (speed > 133333334)
mtsdram(DDR0_26, 0x5B26050C);
else
mtsdram(DDR0_26, 0x5B260408);
mtsdram(DDR0_27, 0x0000682B);
mtsdram(DDR0_28, 0x00000000);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
mtsdram(DDR0_43, 0x030A0200);
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
wait_for_dlllock();
#endif /* #ifndef CONFIG_NAND_U_BOOT */
#ifdef CONFIG_DDR_DATA_EYE
/* -----------------------------------------------------------+
* Perform data eye search if requested.
* ----------------------------------------------------------*/
denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
#endif
return (CFG_MBYTES_SDRAM << 20);
}
/***********************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
long int initdram (int board_type)
{
unsigned int dram_size = 0;
mtsdram(DDR0_02, 0x00000000);
/* Values must be kept in sync with Excel-table <<A0001492.>> ! */
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030602);
mtsdram(DDR0_04, 0x0A020200);
mtsdram(DDR0_05, 0x02020307);
switch (in_be16((u16 *)HCU_HW_VERSION_REGISTER) & HCU_HW_SDRAM_CONFIG_MASK) {
case 1:
dram_size = 256 * 1024 * 1024 ;
mtsdram(DDR0_06, 0x0102C812); /* 256MB RAM */
mtsdram(DDR0_11, 0x0014C800); /* 256MB RAM */
mtsdram(DDR0_43, 0x030A0200); /* 256MB RAM */
break;
case 0:
default:
dram_size = 128 * 1024 * 1024 ;
mtsdram(DDR0_06, 0x0102C80D); /* 128MB RAM */
mtsdram(DDR0_11, 0x000FC800); /* 128MB RAM */
mtsdram(DDR0_43, 0x030A0300); /* 128MB RAM */
break;
}
mtsdram(DDR0_07, 0x00090100);
/*
* TCPD=200 cycles of clock input is required to lock the DLL.
* CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
*/
mtsdram(DDR0_08, 0x02C80001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000100);
mtsdram(DDR0_12, 0x00000003);
mtsdram(DDR0_14, 0x00000000);
mtsdram(DDR0_17, 0x1D000000);
mtsdram(DDR0_18, 0x1D1D1D1D);
mtsdram(DDR0_19, 0x1D1D1D1D);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
#ifdef CONFIG_DDR_ECC
mtsdram(DDR0_22, ECC_RAM);
#else
mtsdram(DDR0_22, NO_ECC_RAM);
#endif
mtsdram(DDR0_23, 0x00000000);
mtsdram(DDR0_24, 0x01020001);
mtsdram(DDR0_26, 0x2D930517);
mtsdram(DDR0_27, 0x00008236);
mtsdram(DDR0_28, 0x00000000);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
wait_for_dlllock();
mtsdram(DDR0_00, 0x40000000); /* Zero init bit */
/*
* Program tlb entries for this size (dynamic)
*/
remove_tlb(CFG_SDRAM_BASE, 256 << 20);
program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual
* address with cache enabled. This is done for fast ECC generation.
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
#endif
return (dram_size);
}
/*-----------------------------------------------------------------------------+
* denali_core_search_data_eye.
+----------------------------------------------------------------------------*/
void denali_core_search_data_eye(unsigned long memory_size)
{
int k, j;
u32 val;
u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
volatile u32 *ram_pointer;
u32 test[NUM_TRIES] = {
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
/* -----------------------------------------------------------+
* De-assert 'start' parameter.
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_02);
val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
mtdcr(ddrcfgd, val);
/* -----------------------------------------------------------+
* Set 'wr_dqs_shift'
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_09);
val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
mtdcr(ddrcfgd, val);
/* -----------------------------------------------------------+
* Set 'dqs_out_shift' = wr_dqs_shift + 32
* ----------------------------------------------------------*/
dqs_out_shift = wr_dqs_shift + 32;
mtdcr(ddrcfga, DDR0_22);
val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
mtdcr(ddrcfgd, val);
passing_cases = 0;
for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
/* -----------------------------------------------------------+
* Set 'dll_dqs_delay_X'.
* ----------------------------------------------------------*/
/* dll_dqs_delay_0 */
mtdcr(ddrcfga, DDR0_17);
val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
/* dll_dqs_delay_1 to dll_dqs_delay_4 */
mtdcr(ddrcfga, DDR0_18);
val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
/* dll_dqs_delay_5 to dll_dqs_delay_8 */
mtdcr(ddrcfga, DDR0_19);
val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
ppcMsync();
ppcMbar();
/* -----------------------------------------------------------+
* Assert 'start' parameter.
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_02);
val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
mtdcr(ddrcfgd, val);
ppcMsync();
ppcMbar();
/* -----------------------------------------------------------+
* Wait for the DCC master delay line to finish calibration
* ----------------------------------------------------------*/
if (wait_for_dlllock() != 0) {
printf("dlllock did not occur !!!\n");
printf("denali_core_search_data_eye!!!\n");
printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
wr_dqs_shift, dll_dqs_delay_X);
hang();
}
ppcMsync();
ppcMbar();
if (wait_for_dram_init_complete() != 0) {
printf("dram init complete did not occur !!!\n");
printf("denali_core_search_data_eye!!!\n");
printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
wr_dqs_shift, dll_dqs_delay_X);
hang();
}
udelay(100); /* wait 100us to ensure init is really completed !!! */
/* write values */
for (j=0; j<NUM_TRIES; j++) {
ram_pointer[j] = test[j];
/* clear any cache at ram location */
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
}
/* read values back */
for (j=0; j<NUM_TRIES; j++) {
for (k=0; k<NUM_READS; k++) {
/* clear any cache at ram location */
__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
if (ram_pointer[j] != test[j])
break;
}
/* read error */
if (k != NUM_READS)
break;
}
/* See if the dll_dqs_delay_X value passed.*/
if (j < NUM_TRIES) {
/* Failed */
passing_cases = 0;
/* break; */
} else {
/* Passed */
if (passing_cases == 0)
dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
passing_cases++;
if (passing_cases >= max_passing_cases) {
max_passing_cases = passing_cases;
wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
dll_dqs_delay_X_end_window = dll_dqs_delay_X;
}
}
/* -----------------------------------------------------------+
* De-assert 'start' parameter.
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_02);
val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
mtdcr(ddrcfgd, val);
} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
/* -----------------------------------------------------------+
* Largest passing window is now detected.
* ----------------------------------------------------------*/
/* Compute dll_dqs_delay_X value */
dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
debug("DQS calibration - Window detected:\n");
debug("max_passing_cases = %d\n", max_passing_cases);
debug("wr_dqs_shift = %d\n", wr_dqs_shift);
debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
debug("dll_dqs_delay_X window = %d - %d\n",
dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
/* -----------------------------------------------------------+
* De-assert 'start' parameter.
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_02);
val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
mtdcr(ddrcfgd, val);
/* -----------------------------------------------------------+
* Set 'wr_dqs_shift'
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_09);
val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
mtdcr(ddrcfgd, val);
debug("DDR0_09=0x%08lx\n", val);
/* -----------------------------------------------------------+
* Set 'dqs_out_shift' = wr_dqs_shift + 32
* ----------------------------------------------------------*/
dqs_out_shift = wr_dqs_shift + 32;
mtdcr(ddrcfga, DDR0_22);
val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
mtdcr(ddrcfgd, val);
debug("DDR0_22=0x%08lx\n", val);
/* -----------------------------------------------------------+
* Set 'dll_dqs_delay_X'.
* ----------------------------------------------------------*/
/* dll_dqs_delay_0 */
mtdcr(ddrcfga, DDR0_17);
val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
debug("DDR0_17=0x%08lx\n", val);
/* dll_dqs_delay_1 to dll_dqs_delay_4 */
mtdcr(ddrcfga, DDR0_18);
val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
debug("DDR0_18=0x%08lx\n", val);
/* dll_dqs_delay_5 to dll_dqs_delay_8 */
mtdcr(ddrcfga, DDR0_19);
val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
mtdcr(ddrcfgd, val);
debug("DDR0_19=0x%08lx\n", val);
/* -----------------------------------------------------------+
* Assert 'start' parameter.
* ----------------------------------------------------------*/
mtdcr(ddrcfga, DDR0_02);
val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
mtdcr(ddrcfgd, val);
ppcMsync();
ppcMbar();
/* -----------------------------------------------------------+
* Wait for the DCC master delay line to finish calibration
* ----------------------------------------------------------*/
if (wait_for_dlllock() != 0) {
printf("dlllock did not occur !!!\n");
hang();
}
ppcMsync();
ppcMbar();
if (wait_for_dram_init_complete() != 0) {
printf("dram init complete did not occur !!!\n");
hang();
}
udelay(100); /* wait 100us to ensure init is really completed !!! */
}
/*************************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
*
************************************************************************/
long int initdram (int board_type)
{
#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
/* CL=3 */
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */
mtsdram(DDR0_04, 0x0A030300);
mtsdram(DDR0_05, 0x02020308);
mtsdram(DDR0_06, 0x0103C812);
mtsdram(DDR0_07, 0x00090100);
mtsdram(DDR0_08, 0x02c80001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000300);
mtsdram(DDR0_11, 0x000CC800);
mtsdram(DDR0_12, 0x00000003);
mtsdram(DDR0_14, 0x00000000);
mtsdram(DDR0_17, 0x1e000000);
mtsdram(DDR0_18, 0x1e1e1e1e);
mtsdram(DDR0_19, 0x1e1e1e1e);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
#ifdef CONFIG_DDR_ECC
mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
#else
mtsdram(DDR0_22, 0x00267F0B);
#endif
mtsdram(DDR0_23, 0x01000000);
mtsdram(DDR0_24, 0x01010001);
mtsdram(DDR0_26, 0x2D93028A);
mtsdram(DDR0_27, 0x0784682B);
mtsdram(DDR0_28, 0x00000080);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000006);
mtsdram(DDR0_43, 0x030A0200);
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
#else
/* CL=4 */
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
mtsdram(DDR0_01, 0x01000000);
mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
mtsdram(DDR0_04, 0x0B030300);
mtsdram(DDR0_05, 0x02020308);
mtsdram(DDR0_06, 0x0003C812);
mtsdram(DDR0_07, 0x00090100);
mtsdram(DDR0_08, 0x03c80001);
mtsdram(DDR0_09, 0x00011D5F);
mtsdram(DDR0_10, 0x00000300);
mtsdram(DDR0_11, 0x000CC800);
mtsdram(DDR0_12, 0x00000003);
mtsdram(DDR0_14, 0x00000000);
mtsdram(DDR0_17, 0x1e000000);
mtsdram(DDR0_18, 0x1e1e1e1e);
mtsdram(DDR0_19, 0x1e1e1e1e);
mtsdram(DDR0_20, 0x0B0B0B0B);
mtsdram(DDR0_21, 0x0B0B0B0B);
#ifdef CONFIG_DDR_ECC
mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
#else
mtsdram(DDR0_22, 0x00267F0B);
#endif
mtsdram(DDR0_23, 0x01000000);
mtsdram(DDR0_24, 0x01010001);
mtsdram(DDR0_26, 0x2D93028A);
mtsdram(DDR0_27, 0x0784682B);
mtsdram(DDR0_28, 0x00000080);
mtsdram(DDR0_31, 0x00000000);
mtsdram(DDR0_42, 0x01000008);
mtsdram(DDR0_43, 0x050A0200);
mtsdram(DDR0_44, 0x00000005);
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
#endif
wait_for_dlllock();
/*
* Program tlb entries for this size (dynamic)
*/
program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual address
* with cache enabled. This is done for fast ECC generation.
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
#ifdef CONFIG_DDR_DATA_EYE
/*
* Perform data eye search if requested.
*/
denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
#endif
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
#endif
/*
* Clear possible errors resulting from data-eye-search.
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
set_mcsr(get_mcsr());
return (CFG_MBYTES_SDRAM << 20);
}