C++ (Cpp) wait_uz2400 примеры использования

Пример #1

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

UINT8 spi_lr(UINT16 Address) {
    UINT8 Value;
    Address = (Address << 5) | 0x8000;

    disable_rf_int();

    uz2400_select(); //Put the CS to Low

    SPI_I2S_SendData(RF_SPI,(Address>>8)&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,Address&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,0x00);
    uz2400_wait_spi_r_ready();
    uz2400_wait_spi_r_ready();
    wait_uz2400();
    Value = SPI_I2S_ReceiveData(RF_SPI);

    wait_uz2400();
    uz2400_deselect(); //Put the CS to High

    enable_rf_int();

    return Value;
}

Пример #2

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

void spi_lw(UINT16 Address, UINT8 Value)
{
    Address = (Address << 5) | 0x8010;

    disable_rf_int();

//Set up the SFRPAGE
    uz2400_select(); //Put the CS to Low
    SPI_I2S_SendData(RF_SPI,(Address>>8)&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();

    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,Address&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,Value);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);

    wait_uz2400();

    wait_uz2400();
    uz2400_deselect(); //Put the CS to High

    enable_rf_int();
}

Пример #3

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

UINT8 spi_sr(UINT8 Address) {
    UINT8 Value;

    Address = (Address << 1);

    disable_rf_int();

    uz2400_select();
    SPI_I2S_SendData(RF_SPI,Address);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,0x00);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    wait_uz2400();
    Value = SPI_I2S_ReceiveData(RF_SPI);

    wait_uz2400();
    uz2400_deselect();

    enable_rf_int();

    return Value;

}

Пример #4

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

void spi_dump_fifo(UINT16 Address, UINT8 *DataPtr, UINT8 Length)
{

    Address = (Address << 5) | 0x8000;

    disable_rf_int();

    uz2400_select(); //Put the CS to Low

    SPI_I2S_SendData(RF_SPI,(Address>>8)&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,Address&0x00ff);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    while(Length--) {
        SPI_I2S_SendData(RF_SPI,0x00ff);
        uz2400_wait_spi_w_ready();
        uz2400_wait_spi_r_ready();
        wait_uz2400();
        *DataPtr++ = SPI_I2S_ReceiveData(RF_SPI);
    }
    wait_uz2400();
    uz2400_deselect(); //Put the CS to High

    enable_rf_int();
}

Пример #5

Файл: uz_srf.c Проект: Simonliang0928/Contiki-BORDER

void uz_reset(){
	uz2400_reset_reset();

	wait_uz2400();
	wait_uz2400();
	wait_uz2400();
	wait_uz2400();
	wait_uz2400();

	uz2400_reset_set();
}

Пример #6

Файл: uz_srf.c Проект: Simonliang0928/Contiki-BORDER

void uz_wakeup(){
	uz2400_wakeup_set();

	wait_uz2400();
	wait_uz2400();
	wait_uz2400();
	wait_uz2400();
	wait_uz2400();

	uz2400_wakeup_reset();

	while(!IntStatus.Wakeup);
	IntStatus.Wakeup=0;
}

Пример #7

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

void spi_rd_rx_fifo(UINT8 *DataPtr, UINT8 *RxLength) {

    UINT8 Length;

    disable_rf_int();

    uz2400_select(); //Put the CS to Low

    SPI_I2S_SendData(RF_SPI,0xE0);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,0x00);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,0x00);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    wait_uz2400();
    Length = SPI_I2S_ReceiveData(RF_SPI);

    Length += 2;
    *RxLength = Length;

    while(Length--) {
        SPI_I2S_SendData(RF_SPI,0x00);
        uz2400_wait_spi_w_ready();
        uz2400_wait_spi_r_ready();
        wait_uz2400();
        *DataPtr++ = SPI_I2S_ReceiveData(RF_SPI);
    }
    wait_uz2400();
    uz2400_deselect(); //Put the CS to High

    enable_rf_int();

}

Пример #8

Файл: uz_spif.c Проект: xdpsee/uIP_on_eCos

void spi_sw(UINT8 Address, UINT8 Value) {
    Address = (Address << 1) | 0x0001; //Shfit the Address
    disable_rf_int();

    //Set up the SFRPAGE
    uz2400_select();

    SPI_I2S_SendData(RF_SPI,Address);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    SPI_I2S_SendData(RF_SPI,Value);
    uz2400_wait_spi_w_ready();
    uz2400_wait_spi_r_ready();
    SPI_I2S_ReceiveData(RF_SPI);
    wait_uz2400();

    uz2400_deselect();

    enable_rf_int();
}