/* public */
WAVWriter::WAVWriter(const std::string& wavefile)
{
file_stream.open(wavefile.c_str());
if (file_stream.fail()) {
boost::format fmt = boost::format(_("Unable to write file %1%"))
% wavefile;
throw SoundException(fmt.str());
}
else {
write_wave_header(file_stream);
std::cout << "# Created 44100 16Mhz stereo wave file:\n" <<
"AUDIOFILE=" << wavefile << std::endl;
}
}
SDL_sound_handler::SDL_sound_handler(const std::string& wavefile)
:
_audioOpened(false)
{
initAudio();
if (! wavefile.empty() ) {
file_stream.open(wavefile.c_str());
if (file_stream.fail()) {
std::cerr << "Unable to write file '" << wavefile << std::endl;
exit(EXIT_FAILURE);
} else {
write_wave_header(file_stream);
std::cout << "# Created 44100 16Mhz stereo wave file:" << std::endl <<
"AUDIOFILE=" << wavefile << std::endl;
}
}
}
/*
main opens the input and temporary files, generates the audio data
as a stream of numbers in ASCII format, then calls convert_to_wave()
to convert the temporary file into the output file in .wav format.
*/
int main(int argc, char **argv)
{
static double notes[NUM_NOTES][BASE_SIZE] = {0};
static int position[NUM_NOTES] = {0};
double temp;
int i,j;
FILE *input;
FILE *output = stdout;
int current_time = 0;
int current_sample = 0;
double next_volume;
double tempo = 1.0;
char *endptr;
int num_samples;
static uint16_t data[2048];
int16_t sample;
double MAX = 1.0;
struct filedat next_note;
if(argc < 2)
scream_and_die(argv[0]);
if(argc == 3)
{
// try to interpret argv[2] as a float
tempo = strtof(argv[2],&endptr);
if(endptr==argv[2] || tempo<0.25 || tempo > 4.0)
{
fprintf(stderr,"Illegal tempo value.\n");
scream_and_die(argv[0]);
}
tempo = 1.0/tempo;
}
if((input = fopen(argv[1],"r"))==NULL)
{
perror("Unable to open input file");
scream_and_die(argv[0]);
}
/* find time of for end of song */
while((fread(&next_note,sizeof(next_note),1,input)==1)&&
(next_note.note != 1));
fseek(input,0,SEEK_SET);
num_samples = tempo * next_note.time * SAMPLE_RATE / 100;
write_wave_header(STDOUT_FILENO,num_samples);
srand(time(NULL));
do{
// read the next note
if(fread(&next_note,sizeof(next_note),1,input)==1)
{
next_note.time = (int)(next_note.time * tempo);
// generate sound, one ms at a time, until we need to start
// the next note
while(current_time < next_note.time)
{
// generate another millsecond of sound
for(i=current_sample; i < current_sample + SMPLS_PER_MS; i++)
{
temp = 0.0;
// update each active string and add its output to the sum
for(j = 0; j< NUM_NOTES; j++)
temp += update(notes[j],array_size(j),&position[j]);
// write a sample to the wave file
sample = (int16_t)((temp/MAX) * (INT16_T_MAX-1));
fwrite(&sample,sizeof(int16_t),1,output);
}
current_sample += SMPLS_PER_MS;
current_time++;
}
if(next_note.note >= 0) // pluck the next note
pluck(notes[next_note.note],array_size(next_note.note),
next_note.vol/32767.0);
}
}while(!feof(input) && (next_note.note > 0));
fclose(input);
fclose(output);
return 0;
}
int main(void)
{
uint8_t system_state=0, i2c_resets=0, si446x_resets=0;//used to track button press functionality and any errors
uint8_t sensors=0;
uint32_t repetition_counter=0; //Used to detect any I2C lockup
uint8_t L3GD20_Data_Buffer_old[8]; //Used to test for noise in the gyro data (indicating that it is working)
uint8_t UplinkFlags=0,CutFlags=0;
uint16_t UplinkBytes=0; //Counters and flags for telemetry
uint32_t last_telemetry=0,cutofftime=0,indtest=0,badgyro=0,permission_time=0,countdown_time=0,last_cuttest=0;
uint16_t sentence_counter=0;
uint8_t silab;
//Cutdown config stuff here, atm uses hardcoded polygon defined in polygon.h
static const int32_t Geofence[UK_GEOFENCE_POINTS*2]=UK_GEOFENCE;
RTC_t RTC_time;
_REENT_INIT_PTR(&my_reent);
_impure_ptr = &my_reent;
SystemInit(); //Sets up the clk
setup_gpio(); //Initialised pins, and detects boot source
DBGMCU_Config(DBGMCU_IWDG_STOP, ENABLE); //Watchdog stopped during JTAG halt
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);/* Enable PWR and BKP clocks */
PWR_BackupAccessCmd(ENABLE);/* Allow access to BKP Domain */
uint16_t shutdown_lock=BKP_ReadBackupRegister(BKP_DR3); //Holds the shutdown lock setting
uint16_t reset_counter=BKP_ReadBackupRegister(BKP_DR2); //The number of consecutive failed reboot cycles
PWR_BackupAccessCmd(DISABLE);
if(RCC->CSR&RCC_CSR_IWDGRSTF && shutdown_lock!=SHUTDOWNLOCK_MAGIC) {//Watchdog reset, turn off
RCC->CSR|=RCC_CSR_RMVF; //Reset the reset flags
shutdown();
}
if(USB_SOURCE==bootsource) {
RCC->CFGR &= ~(uint32_t)RCC_CFGR_PPRE1_DIV16;
RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV4;//Swap the ABP1 bus to run at 12mhz rather than 4 if we booted from USB, makes USB fast enough
}
SysTick_Configuration(); //Start up system timer at 100Hz for uSD card functionality
Watchdog_Config(WATCHDOG_TIMEOUT); //Set the watchdog
Watchdog_Reset(); //Reset watchdog as soon as possible incase it is still running at power on
rtc_init(); //Real time clock initialise - (keeps time unchanged if set)
Usarts_Init();
ISR_Config();
rprintfInit(__usart_send_char); //Printf over the bluetooth
if(USB_SOURCE==bootsource) {
Set_System(); //This actually just inits the storage layer
Set_USBClock();
USB_Interrupts_Config();
USB_Init();
uint32_t nojack=0x000FFFFF; //Countdown timer - a few hundered ms of 0v on jack detect forces a shutdown
while (bDeviceState != CONFIGURED) { //Wait for USB config - timeout causes shutdown
if((Millis>10000 && bDeviceState == UNCONNECTED)|| !nojack) //No USB cable - shutdown (Charger pin will be set to open drain, cant be disabled without usb)
shutdown();
if(GET_VBUS_STATE) //Jack detect resets the countdown
nojack=0x0FFFFF;
nojack--;
Watchdog_Reset(); //Reset watchdog here, if we are stalled here the Millis timeout should catch us
}
PWR_BackupAccessCmd(ENABLE); /* Allow access to BKP Domain */
BKP_WriteBackupRegister(BKP_DR3,0x0000);//Wipe the shutdown lock setting
PWR_BackupAccessCmd(DISABLE);
while(1) {
if(!(Millis%1000) && bDeviceState == SUSPENDED) {
Delay(100);
if(!GET_VBUS_STATE)
shutdown();
}
Watchdog_Reset();
__WFI(); //Sleep mode
}
}
if(!GET_PWR_STATE && !(CoreDebug->DHCSR&0x00000001) && shutdown_lock!=SHUTDOWNLOCK_MAGIC) {//Check here to make sure the power button is still pressed, if not, sleep if no debug and not in always on flight mode
shutdown(); //This means a glitch on the supply line, or a power glitch results in sleep
}
// check to see if battery has enough charge to start
ADC_Configuration(); //We leave this a bit later to allow stabilisation
{
uint32_t t=Millis;
while(Millis<(t+100)){__WFI();} //Sensor+inst amplifier takes about 100ms to stabilise after power on
}
if(Battery_Voltage<BATTERY_STARTUP_LIMIT) { //We will have to turn off
if(reset_counter<10)
shutdown();
}
Watchdog_Reset(); //Card Init can take a second or two
// system has passed battery level check and so file can be opened
{//Context
uint8_t silabs_header[5]={};
uint8_t* silabs_header_=NULL; //Pointer to the array (if all goes ok)
if((f_err_code = f_mount(0, &FATFS_Obj)))Usart_Send_Str((char*)"FatFs mount error\r\n");//This should only error if internal error
else { //FATFS initialised ok, try init the card, this also sets up the SPI1
if(!(f_err_code=f_open(&FATFS_logfile,(const TCHAR*)"time.txt",FA_OPEN_EXISTING|FA_READ|FA_WRITE))){//Try to open time file get system time
if(!f_stat((const TCHAR *)"time.txt",&FATFS_info)) {//Get file info
if(FATFS_info.fsize<5) { //Empty file
RTC_time.year=(FATFS_info.fdate>>9)+1980;//populate the time struct (FAT start==1980, RTC.year==0)
RTC_time.month=(FATFS_info.fdate>>5)&0x000F;
RTC_time.mday=FATFS_info.fdate&0x001F;
RTC_time.hour=(FATFS_info.ftime>>11)&0x001F;
RTC_time.min=(FATFS_info.ftime>>5)&0x003F;
RTC_time.sec=(FATFS_info.ftime<<1)&0x003E;
rtc_settime(&RTC_time);
rprintfInit(__fat_print_char);//printf to the open file
printf("RTC set to %d/%d/%d %d:%d:%d\n",RTC_time.mday,RTC_time.month,RTC_time.year,\
RTC_time.hour,RTC_time.min,RTC_time.sec);
}
}
f_close(&FATFS_logfile); //Close the time.txt file
}
// load settings if file exists
Watchdog_Reset(); //Card Init can take a second or two
if(!f_open(&FATFS_logfile,(const TCHAR *)"settings.dat",FA_OPEN_EXISTING | FA_READ)) {
UINT br;
int8_t rtc_correction;
f_read(&FATFS_logfile, (void*)(&rtc_correction),sizeof(rtc_correction),&br);
//Use the setting to apply correction to the RTC
if(br && (rtc_correction<30) && (rtc_correction>-92) && rtc_correction ) {
PWR_BackupAccessCmd(ENABLE);/* Allow access to BKP Domain */
uint16_t tweaked_prescale = (0x0001<<15)-2;/* Try to run the RTC slightly too fast so it can be corrected either way */
RTC_WaitForSynchro(); /* Wait for RTC registers synchronization */
if( RTC->PRLL != tweaked_prescale ) {/*Note that there is a 0.5ppm offset here (correction 0==0.5ppm slow)*/
RTC_SetPrescaler(tweaked_prescale); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767-2+1) */
RTC_WaitForLastTask();
}
BKP_SetRTCCalibrationValue((uint8_t) ((int16_t)31-(21*(int16_t)rtc_correction)/(int16_t)20) );
BKP_RTCOutputConfig(BKP_RTCOutputSource_None);/* Ensure any output is disabled here */
/* Lock access to BKP Domain */
PWR_BackupAccessCmd(DISABLE);
}
else if(br && ((uint8_t)rtc_correction==0x91) ) {/* 0x91 magic flag sets the RTC clock output on */
PWR_BackupAccessCmd(ENABLE);/* Allow access to BKP Domain */
BKP_RTCOutputConfig(BKP_RTCOutputSource_CalibClock);/* Output a 512Hz reference clock on the TAMPER pin*/
PWR_BackupAccessCmd(DISABLE);
}
if(br) {
f_read(&FATFS_logfile, (void*)(&shutdown_lock),sizeof(shutdown_lock),&br);/*This needs to be set with the same magic flag value*/
if(br==2) {
PWR_BackupAccessCmd(ENABLE);/* Allow access to BKP Domain */
BKP_WriteBackupRegister(BKP_DR3,shutdown_lock);//Wipe the shutdown lock setting
PWR_BackupAccessCmd(DISABLE);
}
}
if(br==2) { //Read was successful, next try to read 5 bytes of packet header
f_read(&FATFS_logfile, (void*)(silabs_header),5,&br);
if(br!=5)
silabs_header_=silabs_header;
}
f_close(&FATFS_logfile); //Close the settings.dat file
}
#ifndef SINGLE_LOGFILE
rtc_gettime(&RTC_time); //Get the RTC time and put a timestamp on the start of the file
rprintfInit(__str_print_char); //Print to the string
printf("%02d-%02d-%02dT%02d-%02d-%02d-%s.csv",RTC_time.year,RTC_time.month,RTC_time.mday,RTC_time.hour,RTC_time.min,RTC_time.sec,"Log");//Timestamp name
rprintfInit(__usart_send_char); //Printf over the bluetooth
#endif
Watchdog_Reset(); //Card Init can take a second or two
if((f_err_code=f_open(&FATFS_logfile,(TCHAR*)LOGFILE_NAME,FA_CREATE_ALWAYS | FA_WRITE))) {//Present
Delay(10000);
if((f_err_code=f_open(&FATFS_logfile,(TCHAR*)LOGFILE_NAME,FA_CREATE_ALWAYS | FA_WRITE))) {//Try again
printf("FatFs drive error %d\r\n",f_err_code);
if(f_err_code==FR_DISK_ERR || f_err_code==FR_NOT_READY)
Usart_Send_Str((char*)"No uSD card inserted?\r\n");
}
}
else {
Watchdog_Reset(); //Card Init can take a second or two
print_string[strlen(print_string)-4]=0x00;//Wipe the .csv off the string
strcat(print_string,"_gyro.wav");
if((f_err_code=f_open(&FATFS_wavfile_gyro,(TCHAR*)LOGFILE_NAME,FA_CREATE_ALWAYS | FA_WRITE))) {//Present
printf("FatFs drive error %d\r\n",f_err_code);
if(f_err_code==FR_DISK_ERR || f_err_code==FR_NOT_READY)
Usart_Send_Str((char*)"No uSD card inserted?\r\n");
}
else { //We have a mounted card
f_err_code=f_lseek(&FATFS_logfile, PRE_SIZE);// Pre-allocate clusters
if (f_err_code || f_tell(&FATFS_logfile) != PRE_SIZE)// Check if the file size has been increased correctly
Usart_Send_Str((char*)"Pre-Allocation error\r\n");
else {
if((f_err_code=f_lseek(&FATFS_logfile, 0)))//Seek back to start of file to start writing
Usart_Send_Str((char*)"Seek error\r\n");
else
rprintfInit(__str_print_char);//Printf to the logfile
}
if(f_err_code)
f_close(&FATFS_logfile);//Close the already opened file on error
else
file_opened=1; //So we know to close the file properly on shutdown
if(file_opened==1) {
Watchdog_Reset(); //Card Init can take a second or two
if (f_err_code || f_tell(&FATFS_wavfile_gyro) != PRE_SIZE)// Check if the file size has been increased correctly
Usart_Send_Str((char*)"Pre-Allocation error\r\n");
else {
if((f_err_code=f_lseek(&FATFS_logfile, 0)))//Seek back to start of file to start writing
Usart_Send_Str((char*)"Seek error\r\n");
else
rprintfInit(__str_print_char);//Printf to the logfile
}
if(f_err_code)
f_close(&FATFS_wavfile_gyro);//Close the already opened file on error
else
file_opened|=2; //So we know to close the file properly on shutdown
}
}
}
}
f_err_code|=write_wave_header(&FATFS_wavfile_gyro, 4, 100, 16);//4 channels, last channel is for the current rpm
Watchdog_Reset(); //Card Init can take a second or two
//Setup and test the silabs radio
silab=si446x_setup(silabs_header_);
if(silab!=0x44) { //Should return the device code
print_string[0]=0x00;
printf("Silabs: %02x\n",silab);
f_puts("Silabs detect error, got:",&FATFS_logfile);
f_puts(print_string,&FATFS_logfile);
shutdown_filesystem(ERR, file_opened);//So we log that something went wrong in the logfile
shutdown();
}
}//Context