void Identifier::setFromSql(const wxString& source)
{
// const wxChar pointers to first and last characters
const wxChar* p = source.c_str();
const wxChar* q = p + source.Length() - 1;
// skip leading and trailing whitespace
while (q > p && wxIsspace(*p))
p++;
while (q > p && wxIsspace(*q))
q--;
if (p > q) // p is first, q is last character, so they may be equal...
{
textM = wxEmptyString;
return;
}
// strings/quoted identifier -> strip and unescape single/double quotes
if (*q == *p && (*p == '\"' || *p == '\''))
{
// NOTE: first parameter must point to first char, but second parameter
// has to point to the char *after* the last char !!!
textM = wxString(p + 1, q);
wxString escapedChar(p, 1);
textM.Replace(escapedChar + escapedChar, escapedChar);
return;
}
// set to uppercased input parameter, no leading and trailing whitespace
textM = wxString(p, q + 1).Upper();
}
void wxHtmlWordCell::SetPreviousWord(wxHtmlWordCell *cell)
{
if ( cell && m_Parent == cell->m_Parent &&
!wxIsspace(cell->m_Word.Last()) && !wxIsspace(m_Word[0u]) )
{
m_allowLinebreak = false;
}
}
void SqlTokenizer::whitespaceToken()
{
sqlTokenTypeM = tkWHITESPACE;
wxASSERT(wxIsspace(*sqlTokenEndM));
sqlTokenEndM++;
// scan until non-whitespace, or until "\0" found
while (*sqlTokenEndM != 0 && wxIsspace(*sqlTokenEndM))
sqlTokenEndM++;
}
void CCManager::DoUpdateCallTip(cbEditor* ed)
{
wxStringVec tips;
int hlStart = m_CurCallTip->hlStart;
int hlEnd = m_CurCallTip->hlEnd;
size_t sRange = 0;
size_t eRange = m_CurCallTip->tip.find(wxT('\n'));
while (eRange != wxString::npos)
{
tips.push_back(m_CurCallTip->tip.Mid(sRange, eRange - sRange));
CCManagerHelper::RipplePts(hlStart, hlEnd, eRange, -1);
sRange = eRange + 1;
eRange = m_CurCallTip->tip.find(wxT('\n'), sRange);
}
if (sRange < m_CurCallTip->tip.Length())
tips.push_back(m_CurCallTip->tip.Mid(sRange));
int offset = 0;
cbStyledTextCtrl* stc = ed->GetControl();
if (m_CallTips.size() > 1)
{
++offset;
if (m_CurCallTip == m_CallTips.begin())
tips.front().Prepend(wxT('\002')); // down arrow
else if (m_CurCallTip + 1 == m_CallTips.end())
tips.front().Prepend(wxT('\001')); // up arrow
else
{
tips.front().Prepend(wxT("\001\002")); // up/down arrows
++offset;
}
tips.push_back(wxString::Format(wxT("(%d/%u)"), m_CurCallTip - m_CallTips.begin() + 1, m_CallTips.size()));
// store for better first choice later
m_CallTipChoiceDict[CCManagerHelper::CallTipToInt(m_CallTips.front().tip, m_CallTips.size())] = m_CurCallTip - m_CallTips.begin();
// fuzzy store
int prefixEndPos = m_CallTipActive;
while (prefixEndPos > 0 && wxIsspace(stc->GetCharAt(prefixEndPos - 1)))
--prefixEndPos;
const wxString& prefix = stc->GetTextRange(stc->WordStartPosition(prefixEndPos, true), prefixEndPos);
m_CallTipFuzzyChoiceDict[CCManagerHelper::CallTipToInt(prefix, m_CallTips.size())] = m_CurCallTip - m_CallTips.begin();
}
int pos = stc->GetCurrentPos();
int lnStart = stc->PositionFromLine(stc->LineFromPosition(pos));
while (wxIsspace(stc->GetCharAt(lnStart)))
++lnStart;
#ifdef __WXMSW__
m_LastTipPos = wxSCI_INVALID_POSITION; // Windows hack to fix display update
#endif // __WXMSW__
DoShowTips(tips, stc, std::max(pos, lnStart), m_CallTipActive, hlStart + offset, hlEnd + offset);
}
void wxStringTokenizer::SetString(const wxString& str,
const wxString& delims,
wxStringTokenizerMode mode)
{
if ( mode == wxTOKEN_DEFAULT )
{
// by default, we behave like strtok() if the delimiters are only
// whitespace characters and as wxTOKEN_RET_EMPTY otherwise (for
// whitespace delimiters, strtok() behaviour is better because we want
// to count consecutive spaces as one delimiter)
const wxChar *p;
for ( p = delims.c_str(); *p; p++ )
{
if ( !wxIsspace(*p) )
break;
}
if ( *p )
{
// not whitespace char in delims
mode = wxTOKEN_RET_EMPTY;
}
else
{
// only whitespaces
mode = wxTOKEN_STRTOK;
}
}
m_delims = delims;
m_mode = mode;
Reinit(str);
}
void SqlTokenizer::defaultToken()
{
if (wxStricmp(sqlTokenStartM, termM.c_str()) == 0)
{
sqlTokenTypeM = tkTERM;
sqlTokenEndM = sqlTokenStartM + termM.Length();
return;
}
// this is needed for new terminator string
while (true)
{
// increase the size until we hit either whitespace, terminator, EOF
// or some of significant characters
sqlTokenEndM++;
if (*sqlTokenEndM == 0
|| *sqlTokenEndM == ',' || *sqlTokenEndM == '='
|| *sqlTokenEndM == '(' || *sqlTokenEndM == ')'
|| *sqlTokenEndM == '+' || *sqlTokenEndM == '-'
|| *sqlTokenEndM == '/' || *sqlTokenEndM == '*'
|| wxIsspace(*sqlTokenEndM)
|| wxStricmp(sqlTokenEndM, termM.c_str()) == 0 )
{
break;
}
}
sqlTokenTypeM = tkUNKNOWN;
}
bool SqlTokenizer::nextToken()
{
sqlTokenStartM = sqlTokenEndM;
if (sqlTokenEndM == 0 || *sqlTokenEndM == 0)
{
sqlTokenTypeM = tkEOF;
return false;
}
// use wxChar* member to scan
wxChar c = *sqlTokenEndM;
if ((c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z'))
keywordIdentifierToken();
else if (c == '"')
quotedIdentifierToken();
else if (c == '\'')
stringToken();
else if (c == '(')
symbolToken(tkPARENOPEN);
else if (c == ')')
symbolToken(tkPARENCLOSE);
else if (c == '=')
symbolToken(tkEQUALS);
else if (c == ',')
symbolToken(tkCOMMA);
else if (c == '/' && *(sqlTokenEndM + 1) == '*')
multilineCommentToken();
else if (c == '-' && *(sqlTokenEndM + 1) == '-')
singleLineCommentToken();
else if (wxIsspace(c))
whitespaceToken();
else
defaultToken();
return true;
}
HighlightLanguage EditorColourSet::AddHighlightLanguage(int lexer, const wxString& name)
{
if ( lexer <= wxSCI_LEX_NULL
|| lexer > wxSCI_LEX_LAST // this is a C::B extension to wxscintilla.h
|| name.IsEmpty() )
{
return HL_NONE;
}
// fix name to be XML compliant
wxString newID;
size_t pos = 0;
while (pos < name.Length())
{
wxChar ch = name[pos];
if (wxIsalnum(ch) || ch == _T('_'))
newID.Append(ch); // valid character
else if (wxIsspace(ch))
newID.Append(_T('_')); // convert spaces to underscores
++pos;
}
// make sure it's not starting with a number or underscore.
// if it is, prepend an 'A'
if (wxIsdigit(newID.GetChar(0)) || newID.GetChar(0) == _T('_'))
newID.Prepend(_T('A'));
if (GetHighlightLanguage(newID) != HL_NONE)
return HL_NONE;
m_Sets[newID].m_Langs = name;
m_Sets[newID].m_Lexers = lexer;
return newID;
}
bool wxExtHelpController::ParseMapFileLine(const wxString& line)
{
const wxChar *p = line.c_str();
// skip whitespace
while ( isascii(*p) && wxIsspace(*p) )
p++;
// skip empty lines and comments
if ( *p == wxT('\0') || *p == WXEXTHELP_COMMENTCHAR )
return true;
// the line is of the form "num url" so we must have an integer now
wxChar *end;
const unsigned long id = wxStrtoul(p, &end, 0);
if ( end == p )
return false;
p = end;
while ( isascii(*p) && wxIsspace(*p) )
p++;
// next should be the URL
wxString url;
url.reserve(line.length());
while ( isascii(*p) && !wxIsspace(*p) )
url += *p++;
while ( isascii(*p) && wxIsspace(*p) )
p++;
// and finally the optional description of the entry after comment
wxString doc;
if ( *p == WXEXTHELP_COMMENTCHAR )
{
p++;
while ( isascii(*p) && wxIsspace(*p) )
p++;
doc = p;
}
m_MapList->Append(new wxExtHelpMapEntry(id, url, doc));
m_NumOfEntries++;
return true;
}
void ClangCodeCompletion::HighlightOccurrences(cbEditor* ed)
{
ClTranslUnitId translId = GetCurrentTranslationUnitId();
cbStyledTextCtrl* stc = ed->GetControl();
int pos = stc->GetCurrentPos();
const wxChar ch = stc->GetCharAt(pos);
if (pos > 0
&& (wxIsspace(ch) || (ch != wxT('_') && wxIspunct(ch)))
&& !wxIsspace(stc->GetCharAt(pos - 1)))
{
--pos;
}
// chosen a high value for indicator, hoping not to interfere with the indicators used by some lexers
// if they get updated from deprecated old style indicators someday.
const int theIndicator = 16;
stc->SetIndicatorCurrent(theIndicator);
// Set Styling:
// clear all style indications set in a previous run (is also done once after text gets unselected)
stc->IndicatorClearRange(0, stc->GetLength());
if (stc->GetTextRange(pos - 1, pos + 1).Strip().IsEmpty())
return;
// TODO: use independent key
wxColour highlightColour(Manager::Get()->GetColourManager()->GetColour(wxT("editor_highlight_occurrence")));
stc->IndicatorSetStyle(theIndicator, wxSCI_INDIC_HIGHLIGHT);
stc->IndicatorSetForeground(theIndicator, highlightColour);
stc->IndicatorSetUnder(theIndicator, true);
const int line = stc->LineFromPosition(pos);
ClTokenPosition loc(line + 1, pos - stc->PositionFromLine(line) + 1);
std::vector< std::pair<int, int> > occurrences;
m_pClangPlugin->GetOccurrencesOf( translId, ed->GetFilename(), loc, 100, occurrences );
for (std::vector< std::pair<int, int> >::const_iterator tkn = occurrences.begin();
tkn != occurrences.end(); ++tkn)
{
stc->IndicatorFillRange(tkn->first, tkn->second);
}
}
// quote the string before writing it to file
static wxString FilterOutValue(const wxString& str)
{
if ( !str )
return str;
wxString strResult;
strResult.Alloc(str.Len());
// quoting is necessary to preserve spaces in the beginning of the string
bool bQuote = wxIsspace(str[0]) || str[0] == wxT('"');
if ( bQuote )
strResult += wxT('"');
wxChar c;
for ( size_t n = 0; n < str.Len(); n++ ) {
switch ( str[n] ) {
case wxT('\n'):
c = wxT('n');
break;
case wxT('\r'):
c = wxT('r');
break;
case wxT('\t'):
c = wxT('t');
break;
case wxT('\\'):
c = wxT('\\');
break;
case wxT('"'):
if ( bQuote ) {
c = wxT('"');
break;
}
//else: fall through
default:
strResult += str[n];
continue; // nothing special to do
}
// we get here only for special characters
strResult << wxT('\\') << c;
}
if ( bQuote )
strResult += wxT('"');
return strResult;
}
void
strutil_delwhitespace(String &str)
{
String newstr = wxEmptyString;
const wxChar *cptr = str.c_str();
while(wxIsspace(*cptr))
cptr++;
while(*cptr)
newstr += *cptr++;
str = newstr;
}
bool wxPropertyValidator::StringToLong (wxChar *s, long *number) {
bool ok = true;
wxChar *value_ptr;
*number = wxStrtol (s, &value_ptr, 10);
if (value_ptr) {
int len = wxStrlen (value_ptr);
for (int i = 0; i < len; i++) {
ok = (wxIsspace (value_ptr[i]) != 0);
if (!ok) return false;
}
}
return ok;
}
void cbStyledTextCtrl::DoBraceCompletion(const wxChar& ch)
{
const int pos = GetCurrentPos();
const int style = GetStyleAt(pos);
if (IsComment(style) || IsComment(GetStyleAt(pos - 2)))
return; // do nothing
if (ch == wxT('\'') || ch == wxT('"'))
{
if (GetCharAt(pos) == ch)
{
DeleteBack();
CharRight();
}
else if (!IsString(GetStyleAt(pos - 2)) && !IsCharacter(GetStyleAt(pos - 2)))
InsertText(pos, ch);
return; // done
}
if (IsString(style) || IsCharacter(style))
return; // do nothing
const wxString opBraces(wxT("([{")); const int opBraceIdx = opBraces.Find(ch);
const wxString clBraces(wxT(")]}")); const int clBraceIdx = clBraces.Find(ch);
if ( (opBraceIdx != wxNOT_FOUND) || (clBraceIdx != wxNOT_FOUND) )
{
if ( GetCharAt(pos) == ch )
{
DeleteBack();
CharRight();
}
else if (opBraceIdx != wxNOT_FOUND)
{
int nextPos = pos;
while ( wxIsspace(GetCharAt(nextPos)) && (nextPos < GetLength()) )
++nextPos;
if ( ((wxChar)GetCharAt(nextPos) != clBraces[opBraceIdx])
|| (BraceMatch(nextPos) != wxNOT_FOUND) )
{
InsertText(pos, clBraces[opBraceIdx]);
}
}
}
}
void wxStringTokenizer::SetString(const wxString& str,
const wxString& delims,
wxStringTokenizerMode mode)
{
if ( mode == wxTOKEN_DEFAULT )
{
// by default, we behave like strtok() if the delimiters are only
// whitespace characters and as wxTOKEN_RET_EMPTY otherwise (for
// whitespace delimiters, strtok() behaviour is better because we want
// to count consecutive spaces as one delimiter)
wxString::const_iterator p;
for ( p = delims.begin(); p != delims.end(); ++p )
{
if ( !wxIsspace(*p) )
break;
}
if ( p != delims.end() )
{
// not whitespace char in delims
mode = wxTOKEN_RET_EMPTY;
}
else
{
// only whitespaces
mode = wxTOKEN_STRTOK;
}
}
#if wxUSE_UNICODE // FIXME-UTF8: only wc_str()
m_delims = delims.wc_str();
#else
m_delims = delims.mb_str();
#endif
m_delimsLen = delims.length();
m_mode = mode;
Reinit(str);
}
void Compiler::MakeValidID()
{
// basically, make it XML-element compatible
// only allow a-z, 0-9 and _
// (it is already lowercase)
// any non-conformant character will be removed
wxString newID;
if (m_ID.IsEmpty())
m_ID = m_Name;
size_t pos = 0;
while (pos < m_ID.Length())
{
wxChar ch = m_ID[pos];
if (wxIsalnum(ch) || ch == _T('_')) // valid character
newID.Append(ch);
else if (wxIsspace(ch)) // convert spaces to underscores
newID.Append(_T('_'));
++pos;
}
// make sure it's not starting with a number.
// if it is, prepend "cb"
if (wxIsdigit(newID.GetChar(0)))
newID.Prepend(_T("cb"));
if (newID.IsEmpty()) // empty? wtf?
cbThrow(_T("Can't create a valid compiler ID for ") + m_Name);
m_ID = newID.Lower();
// check for unique ID
if (!IsUniqueID(m_ID))
cbThrow(_T("Compiler ID already exists for ") + m_Name);
m_CompilerIDs.Add(m_ID);
}
std::vector<cbCodeCompletionPlugin::CCToken> ClangCodeCompletion::GetAutocompList(bool isAuto, cbEditor* ed, int& tknStart, int& tknEnd)
{
#ifdef CLANGPLUGIN_TRACE_FUNCTIONS
fprintf(stdout,"%s isAuto=%d\n", __PRETTY_FUNCTION__,(int)isAuto);
#endif
std::vector<cbCodeCompletionPlugin::CCToken> tokens;
int CCOutstanding = m_CCOutstanding;
if ((CCOutstanding > 0)&&(m_CCOutstandingPos != ed->GetControl()->GetCurrentPos()))
{
CCOutstanding = 0;
}
m_CCOutstanding = 0;
ClTranslUnitId translUnitId = m_TranslUnitId;
if( translUnitId != GetCurrentTranslationUnitId() )
return tokens;
if (translUnitId == wxNOT_FOUND)
{
Manager::Get()->GetLogManager()->LogWarning(wxT("ClangLib: m_TranslUnitId == wxNOT_FOUND, "
"cannot complete in file ") + ed->GetFilename());
return tokens;
}
cbStyledTextCtrl* stc = ed->GetControl();
const int style = stc->GetStyleAt(tknEnd);
const wxChar curChar = stc->GetCharAt(tknEnd - 1);
if (isAuto) // filter illogical cases of auto-launch
{
if ((curChar == wxT(':') // scope operator
&& stc->GetCharAt(tknEnd - 2) != wxT(':') )
|| ( curChar == wxT('>') // '->'
&& stc->GetCharAt(tknEnd - 2) != wxT('-') )
|| ( wxString(wxT("<\"/")).Find(curChar) != wxNOT_FOUND // #include directive (TODO: enumerate completable include files)
&& !stc->IsPreprocessor(style)))
{
return tokens;
}
}
const int line = stc->LineFromPosition(tknStart);
/*
std::map<wxString, wxString> unsavedFiles;
EditorManager* edMgr = Manager::Get()->GetEditorManager();
for (int i = 0; i < edMgr->GetEditorsCount(); ++i)
{
cbEditor* editor = edMgr->GetBuiltinEditor(i);
if (editor && editor->GetModified())
unsavedFiles.insert(std::make_pair(editor->GetFilename(), editor->GetControl()->GetText()));
}
*/
const int lnStart = stc->PositionFromLine(line);
int column = tknStart - lnStart;
for (; column > 0; --column)
{
if (!wxIsspace(stc->GetCharAt(lnStart + column - 1))
|| (column != 1 && !wxIsspace(stc->GetCharAt(lnStart + column - 2))))
{
break;
}
}
const wxString& prefix = stc->GetTextRange(tknStart, tknEnd).Lower();
bool includeCtors = true; // sometimes we get a lot of these
for (int i = tknStart - 1; i > 0; --i)
{
wxChar chr = stc->GetCharAt(i);
if (!wxIsspace(chr))
{
if (chr == wxT(';') || chr == wxT('}')) // last non-whitespace character
includeCtors = false; // filter out ctors (they are unlikely to be wanted in this situation)
break;
}
}
std::vector<ClToken> tknResults;
if ((CCOutstanding == 0)||(m_CCOutstandingResults.size()==0))
{
ClTokenPosition loc(line+1, column+1);
//ClangProxy::CodeCompleteAtJob job( cbEVT_CLANG_SYNCTASK_FINISHED, idClangCodeCompleteTask, isAuto, ed->GetFilename(), loc, m_TranslUnitId, unsavedFiles);
//m_Proxy.AppendPendingJob(job);
unsigned long timeout = 40;
if( !isAuto )
{
timeout = 500;
}
if( wxCOND_TIMEOUT == m_pClangPlugin->GetCodeCompletionAt(translUnitId, ed->GetFilename(), loc, timeout, tknResults))
{
if (wxGetLocalTime() - m_CCOutstandingLastMessageTime > 10)
{
//InfoWindow::Display(_("Code completion"), _("Busy parsing the document"), 1000);
m_CCOutstandingLastMessageTime = wxGetLocalTime();
}
//std::cout<<"Timeout waiting for code completion"<<std::endl;
m_CCOutstanding++;
m_CCOutstandingPos = ed->GetControl()->GetCurrentPos();
m_CCOutstandingResults.clear();
return tokens;
}
}
else
{
tknResults = m_CCOutstandingResults;
}
//m_Proxy.CodeCompleteAt(isAuto, ed->GetFilename(), line + 1, column + 1,
// m_TranslUnitId, unsavedFiles, tknResults);
if (prefix.Length() > 3) // larger context, match the prefix at any point in the token
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
if (tknIt->name.Lower().Find(prefix) != wxNOT_FOUND && (includeCtors || tknIt->category != tcCtorPublic))
tokens.push_back(cbCodeCompletionPlugin::CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
else if (prefix.IsEmpty())
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
// it is rather unlikely for an operator to be the desired completion
if (!tknIt->name.StartsWith(wxT("operator")) && (includeCtors || tknIt->category != tcCtorPublic))
tokens.push_back(cbCodeCompletionPlugin::CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
else // smaller context, only allow matches of the prefix at the beginning of the token
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
if (tknIt->name.Lower().StartsWith(prefix) && (includeCtors || tknIt->category != tcCtorPublic))
tokens.push_back(cbCodeCompletionPlugin::CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
if (!tokens.empty())
{
if (prefix.IsEmpty() && tokens.size() > 1500) // reduce to give only top matches
{
std::partial_sort(tokens.begin(), tokens.begin() + 1000, tokens.end(), PrioritySorter());
tokens.erase(tokens.begin() + 1000, tokens.end());
}
const int imgCount = m_pClangPlugin->GetImageList(translUnitId).GetImageCount();
for (int i = 0; i < imgCount; ++i)
stc->RegisterImage(i, m_pClangPlugin->GetImageList(translUnitId).GetBitmap(i));
bool isPP = stc->GetLine(line).Strip(wxString::leading).StartsWith(wxT("#"));
std::set<int> usedWeights;
for (std::vector<cbCodeCompletionPlugin::CCToken>::iterator tknIt = tokens.begin();
tknIt != tokens.end(); ++tknIt)
{
wxStringVec keywords = m_pClangPlugin->GetKeywords(translUnitId);
usedWeights.insert(tknIt->weight);
switch (tknIt->category)
{
case tcNone:
if (isPP)
tknIt->category = tcMacroDef;
else if (std::binary_search(keywords.begin(), keywords.end(), GetActualName(tknIt->name)))
tknIt->category = tcLangKeyword;
break;
case tcClass:
case tcCtorPublic:
case tcDtorPublic:
case tcFuncPublic:
case tcVarPublic:
case tcEnum:
case tcTypedef:
// TODO
//m_Proxy.RefineTokenType(m_TranslUnitId, tknIt->id, tknIt->category);
break;
default:
break;
}
}
// Clang sometimes gives many weight values, which can make completion more difficult
// because results are less alphabetical. Use a compression map on the lower priority
// values (higher numbers) to reduce the total number of weights used.
if (usedWeights.size() > 3)
{
std::vector<int> weightsVec(usedWeights.begin(), usedWeights.end());
std::map<int, int> weightCompr;
weightCompr[weightsVec[0]] = weightsVec[0];
weightCompr[weightsVec[1]] = weightsVec[1];
int factor = (weightsVec.size() > 7 ? 3 : 2);
for (size_t i = 2; i < weightsVec.size(); ++i)
weightCompr[weightsVec[i]] = weightsVec[(i - 2) / factor + 2];
for (std::vector<cbCodeCompletionPlugin::CCToken>::iterator tknIt = tokens.begin();
tknIt != tokens.end(); ++tknIt)
{
tknIt->weight = weightCompr[tknIt->weight];
}
}
}
std::cout<<"CodeCompletion finished"<<std::endl;
return tokens;
}
// cbEVT_SHOW_CALL_TIP
void CCManager::OnShowCallTip(CodeBlocksEvent& event)
{
event.Skip();
cbEditor* ed = Manager::Get()->GetEditorManager()->GetBuiltinActiveEditor();
if (!ed)
return;
cbCodeCompletionPlugin* ccPlugin = GetProviderFor(ed);
if (!ccPlugin)
return;
cbStyledTextCtrl* stc = ed->GetControl();
int pos = stc->GetCurrentPos();
int argsPos = wxSCI_INVALID_POSITION;
wxString curTip;
if (!m_CallTips.empty())
curTip = m_CurCallTip->tip;
m_CallTips = ccPlugin->GetCallTips(pos, stc->GetStyleAt(pos), ed, argsPos);
if (!m_CallTips.empty() && (event.GetInt() != FROM_TIMER || argsPos == m_CallTipActive))
{
int lnStart = stc->PositionFromLine(stc->LineFromPosition(pos));
while (wxIsspace(stc->GetCharAt(lnStart)))
++lnStart; // do not show too far left on multi-line call tips
if ( m_CallTips.size() > 1
&& !Manager::Get()->GetConfigManager(wxT("ccmanager"))->ReadBool(wxT("multi_page_tips"), true) )
{
wxString tip;
int hlStart, hlEnd;
hlStart = hlEnd = wxSCI_INVALID_POSITION;
for (CallTipVec::const_iterator itr = m_CallTips.begin();
itr != m_CallTips.end(); ++itr)
{
if (hlStart == hlEnd && itr->hlStart != itr->hlEnd)
{
hlStart = tip.Length() + itr->hlStart;
hlEnd = tip.Length() + itr->hlEnd;
}
tip += itr->tip + wxT('\n');
}
m_CallTips.clear();
m_CallTips.push_back(cbCodeCompletionPlugin::CCCallTip(tip.RemoveLast(), hlStart, hlEnd));
}
m_CurCallTip = m_CallTips.begin();
if (m_CallTips.size() > 1)
{
// search long term recall
std::map<int, size_t>::const_iterator choiceItr =
m_CallTipChoiceDict.find(CCManagerHelper::CallTipToInt(m_CurCallTip->tip, m_CallTips.size()));
if (choiceItr != m_CallTipChoiceDict.end() && choiceItr->second < m_CallTips.size())
m_CurCallTip = m_CallTips.begin() + choiceItr->second;
if (choiceItr == m_CallTipChoiceDict.end() || argsPos == m_CallTipActive)
{
int prefixEndPos = argsPos;
while (prefixEndPos > 0 && wxIsspace(stc->GetCharAt(prefixEndPos - 1)))
--prefixEndPos;
const wxString& prefix = stc->GetTextRange(stc->WordStartPosition(prefixEndPos, true), prefixEndPos);
choiceItr = m_CallTipFuzzyChoiceDict.find(CCManagerHelper::CallTipToInt(prefix, m_CallTips.size()));
if (choiceItr != m_CallTipFuzzyChoiceDict.end() && choiceItr->second < m_CallTips.size())
m_CurCallTip = m_CallTips.begin() + choiceItr->second;
}
// search short term recall
for (CallTipVec::const_iterator itr = m_CallTips.begin();
itr != m_CallTips.end(); ++itr)
{
if (itr->tip == curTip)
{
m_CurCallTip = itr;
break;
}
}
}
m_CallTipActive = argsPos;
DoUpdateCallTip(ed);
}
else if (m_CallTipActive != wxSCI_INVALID_POSITION)
{
static_cast<wxScintilla*>(stc)->CallTipCancel();
m_CallTipActive = wxSCI_INVALID_POSITION;
}
}
wxInt32 NaturalCompare(wxString String1, wxString String2, bool CaseSensitive = false)
{
wxInt32 StringCounter1 = 0, StringCounter2 = 0;
wxInt32 String1Zeroes = 0, String2Zeroes = 0;
wxChar String1Char, String2Char;
wxInt32 Result;
if (!CaseSensitive)
{
String1.MakeLower();
String2.MakeLower();
}
while (true)
{
String1Zeroes = 0;
String2Zeroes = 0;
String1Char = String1[StringCounter1];
String2Char = String2[StringCounter2];
// skip past whitespace or zeroes in first string
while (wxIsspace(String1Char) || String1Char == '0' )
{
if (String1Char == '0')
{
String1Zeroes++;
}
else
{
String1Zeroes = 0;
}
String1Char = String1[++StringCounter1];
}
// skip past whitespace or zeroes in second string
while (wxIsspace(String2Char) || String2Char == '0')
{
if (String2Char == '0')
{
String2Zeroes++;
}
else
{
String2Zeroes = 0;
}
String2Char = String2[++StringCounter2];
}
// We encountered some digits, compare these.
if (wxIsdigit(String1Char) && wxIsdigit(String2Char))
{
if ((Result = NaturalCompareWorker(
String1.Mid(StringCounter1),
String2.Mid(StringCounter2))) != 0)
{
return Result;
}
}
if ((String1Char == 0) && (String2Char == 0))
{
return (String1Zeroes - String2Zeroes);
}
if (String1Char < String2Char)
{
return -1;
}
else if (String1Char > String2Char)
{
return 1;
}
++StringCounter1;
++StringCounter2;
}
}
int URLDetector::FindURL(const wxChar *text, int& len)
{
// offset of the current value of text from the initial one
int offset = 0;
match:
int pos = scan(text, len);
if ( !len )
return -1;
// the provisional start and end of the URL, will be changed below
const wxChar *start = text + pos;
const wxChar *p = start + len;
// there are 2 different cases: a mailto: URL or a mail address and
// anything else which we need to treat differently
bool isMail = *start == '@';
if ( isMail )
{
// look for the start of the address
start--;
while ( start > text && IsLocalPartChar(*start) )
start--;
// have we stopped at '<'?
bool hasAngleBracket = *start == '<';
if ( !hasAngleBracket )
{
if ( !IsLocalPartChar(*start) )
{
// we went too far backwards
start++;
}
//else: we stopped at the start of the text
}
//else: keep '<' as part of the URL
// now look for the end of it
while ( *p && IsDomainChar(*p) )
{
p++;
}
// finally we should either have the brackets from both sides or none
// at all
if ( hasAngleBracket )
{
if ( *p == '>' )
{
// take the right bracket as well
p++;
}
else
{
// forget about the left one
start++;
}
}
}
else // !bare mail address
{
for ( ;; )
{
size_t lenURL = 0;
while ( IsURLChar(*p) )
{
lenURL++;
p++;
}
// URLs are frequently so long that they're spread across multiple
// lines, so try to see if this might be the case here
//
// first of all we need to check whether it is at the end of line but
// we should allow some trailing spaces
const wxChar* q = p;
while ( *q == ' ' )
q++;
if ( q[0] != '\r' || q[1] != '\n' )
break; // not at the line end
// also check if it's really long enough to be wrapped:
// the short URLs normally shouldn't be wrapped
static const size_t URL_WRAP_LEN = 30; // min len of wrapped URL
if ( lenURL < URL_WRAP_LEN )
break; // too short
if ( !IsURLChar(q[2]) )
break; // doesn't seem to be continued on the next line
// heuristic text for end of URL detection
if ( p - start > 5 && !CanBeWrapped(p) )
{
// it seems that the URL ends here
break;
}
p = q + 2; // go to the start of next line
// Check that the beginning of next line is not the start of
// another URL.
//
// Note that although '@' alone is recognized as the beginning
// of an URL: here it should not be the case.
int nextlen = 0;
int nextpos = scan(p, nextlen);
if ( nextlen && nextpos == 0 && *p != '@')
{
p -= 2;
// The start of the next line being the start of an URL on its own,
// do not join the two.
break;
}
// check whether the next line starts with a word -- this is a good
// indication that the URL hasn't wrapped
q = p;
while ( wxIsalpha(*q) )
q++;
if ( *q == _T(' ') || (wxStrchr(_T(".,:;"), *q) && q[1] == _T(' ')) )
{
// looks like we've a word (i.e. sequence of letters terminated by
// space or punctuation) at the start of the next line
p -= 2;
break;
}
// another special case: subsequent dashes are very unusual in URLs
// but often used as separator lines, so we assume that they indicate
// the end of the URL if we find them on the next line.
if ( p[0] == '-' && p[1] == '-' )
break;
// it might be a wrapped URL but it might be not: it seems like we
// get way too many false positives if we suppose that it's always
// the case... so restrict the wrapped URLs detection to the case
// when they occur at the beginning of the line, possibly after some
// white space as this is how people usually format them
q = start;
while ( q >= text && *q != '\n' )
{
q--;
if ( !wxIsspace(*q) )
break;
}
// Does the URL start at the beginning of the line, or does it have
// a '<' just in front?
if ( q >= text && *q != '\n' && *q != '<')
break;
// it did occur at the start (or after '<'), suppose the URL is
// wrapped and so we continue on the next line (and no need to test
// the first character, it had been already done above)
p++;
}
}
// truncate any punctuation at the end
while ( strchr(".:,)]!?", *(p - 1)) )
p--;
// additional checks for the matches which didn't have an explicit scheme
if ( isMail || text[pos + len - 3 /* len of "://" */ ] != _T(':') )
{
// '@' matches may result in false positives, as not every '@' character
// is inside a mailto URL so try to weed them out by requiring that the
// mail address has a reasonable minimal length ("*****@*****.**" and
// "www.xy.fr" are probably the shortest ones we can have, hence 8)
// which at least avoids matching the bare '@'s
bool good = (p - start) >= 8;
if ( good )
{
// also check that we have at least one dot in the domain part for the
// mail addresses
const wxChar *
pDot = wxTmemchr(text + pos + 1, '.', p - text - pos - 1);
if ( !pDot )
{
good = false;
}
else if ( !isMail )
{
// and has either two dots or at least a slash the other URLs,
// otherwise it probably isn't an address/URL neither (stuff like
// "... using ftp.If you ... " shouldn't be recognized as an URL)
good = wxTmemchr(pDot + 1, '.', p - pDot - 1) != NULL ||
wxTmemchr(pDot + 1, '/', p - pDot - 1) != NULL;
}
}
if ( !good )
{
const int offDiff = pos + len;
offset += offDiff;
text += offDiff;
// slightly more efficient than recursion...
goto match;
}
}
// return the length of the match
len = p - start;
return start - text + offset;
}
std::vector<ClangPlugin::CCToken> ClangPlugin::GetAutocompList(bool isAuto, cbEditor* ed, int& tknStart, int& tknEnd)
{
std::vector<CCToken> tokens;
if (ed != m_pLastEditor)
{
m_TranslUnitId = m_Proxy.GetTranslationUnitId(ed->GetFilename());
m_pLastEditor = ed;
}
if (m_TranslUnitId == wxNOT_FOUND)
{
Manager::Get()->GetLogManager()->LogWarning(wxT("ClangLib: m_TranslUnitId == wxNOT_FOUND, cannot complete in file ") + ed->GetFilename());
return tokens;
}
cbStyledTextCtrl* stc = ed->GetControl();
const int style = stc->GetStyleAt(tknEnd);
const wxChar curChar = stc->GetCharAt(tknEnd - 1);
if (isAuto) // filter illogical cases of auto-launch
{
if ( ( curChar == wxT(':') // scope operator
&& stc->GetCharAt(tknEnd - 2) != wxT(':') )
|| ( curChar == wxT('>') // '->'
&& stc->GetCharAt(tknEnd - 2) != wxT('-') )
|| ( wxString(wxT("<\"/")).Find(curChar) != wxNOT_FOUND // #include directive (TODO: enumerate completable include files)
&& !stc->IsPreprocessor(style) ) )
{
return tokens;
}
}
std::vector<ClToken> tknResults;
const int line = stc->LineFromPosition(tknStart);
std::map<wxString, wxString> unsavedFiles;
EditorManager* edMgr = Manager::Get()->GetEditorManager();
for (int i = 0; i < edMgr->GetEditorsCount(); ++i)
{
cbEditor* editor = edMgr->GetBuiltinEditor(i);
if (editor && editor->GetModified())
unsavedFiles.insert(std::make_pair(editor->GetFilename(), editor->GetControl()->GetText()));
}
const int lnStart = stc->PositionFromLine(line);
int column = tknStart - lnStart;
for (; column > 0; --column)
{
if ( !wxIsspace(stc->GetCharAt(lnStart + column - 1))
|| (column != 1 && !wxIsspace(stc->GetCharAt(lnStart + column - 2))) )
{
break;
}
}
m_Proxy.CodeCompleteAt(isAuto, ed->GetFilename(), line + 1, column + 1, m_TranslUnitId, unsavedFiles, tknResults);
const wxString& prefix = stc->GetTextRange(tknStart, tknEnd).Lower();
bool includeCtors = true; // sometimes we get a lot of these
for (int i = tknStart - 1; i > 0; --i)
{
wxChar chr = stc->GetCharAt(i);
if (!wxIsspace(chr))
{
if (chr == wxT(';') || chr == wxT('}')) // last non-whitespace character
includeCtors = false; // filter out ctors (they are unlikely to be wanted in this situation)
break;
}
}
if (prefix.Length() > 3) // larger context, match the prefix at any point in the token
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
if (tknIt->name.Lower().Find(prefix) != wxNOT_FOUND && (includeCtors || tknIt->category != tcCtorPublic))
tokens.push_back(CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
else if (prefix.IsEmpty())
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
if (!tknIt->name.StartsWith(wxT("operator")) && (includeCtors || tknIt->category != tcCtorPublic)) // it is rather unlikely for an operator to be the desired completion
tokens.push_back(CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
else // smaller context, only allow matches of the prefix at the beginning of the token
{
for (std::vector<ClToken>::const_iterator tknIt = tknResults.begin();
tknIt != tknResults.end(); ++tknIt)
{
if (tknIt->name.Lower().StartsWith(prefix) && (includeCtors || tknIt->category != tcCtorPublic))
tokens.push_back(CCToken(tknIt->id, tknIt->name, tknIt->name, tknIt->weight, tknIt->category));
}
}
if (!tokens.empty())
{
if (prefix.IsEmpty() && tokens.size() > 1500) // reduce to give only top matches
{
std::partial_sort(tokens.begin(), tokens.begin() + 1000, tokens.end(), PrioritySorter());
tokens.erase(tokens.begin() + 1000, tokens.end());
}
const int imgCount = m_ImageList.GetImageCount();
for (int i = 0; i < imgCount; ++i)
stc->RegisterImage(i, m_ImageList.GetBitmap(i));
bool isPP = stc->GetLine(line).Strip(wxString::leading).StartsWith(wxT("#"));
std::set<int> usedWeights;
for (std::vector<CCToken>::iterator tknIt = tokens.begin();
tknIt != tokens.end(); ++tknIt)
{
usedWeights.insert(tknIt->weight);
switch (tknIt->category)
{
case tcNone:
if (isPP)
tknIt->category = tcMacroDef;
else if (std::binary_search(m_CppKeywords.begin(), m_CppKeywords.end(), GetActualName(tknIt->name)))
tknIt->category = tcLangKeyword;
break;
case tcClass:
case tcCtorPublic:
case tcDtorPublic:
case tcFuncPublic:
case tcVarPublic:
case tcEnum:
case tcTypedef:
m_Proxy.RefineTokenType(m_TranslUnitId, tknIt->id, tknIt->category);
break;
default:
break;
}
}
// Clang sometimes gives many weight values, which can make completion more difficult
// because results are less alphabetical. Use a compression map on the lower priority
// values (higher numbers) to reduce the total number of weights used.
if (usedWeights.size() > 3)
{
std::vector<int> weightsVec(usedWeights.begin(), usedWeights.end());
std::map<int, int> weightCompr;
weightCompr[weightsVec[0]] = weightsVec[0];
weightCompr[weightsVec[1]] = weightsVec[1];
int factor = (weightsVec.size() > 7 ? 3 : 2);
for (size_t i = 2; i < weightsVec.size(); ++i)
weightCompr[weightsVec[i]] = weightsVec[(i - 2) / factor + 2];
for (std::vector<CCToken>::iterator tknIt = tokens.begin();
tknIt != tokens.end(); ++tknIt)
{
tknIt->weight = weightCompr[tknIt->weight];
}
}
}
return tokens;
}
bool EffectNyquist::PromptUser()
{
if (!SetXlispPath()) {
return false;
}
if (mInteractive) {
NyquistInputDialog dlog(wxGetTopLevelParent(NULL), -1,
_("Nyquist Prompt"),
_("Enter Nyquist Command: "),
mInputCmd);
dlog.CentreOnParent();
int result = dlog.ShowModal();
if (result == wxID_CANCEL) {
return false;
}
/*if (result == eDebugID) {
mDebug = true;
}*/
mDebug = (result == eDebugID);
// remember exact input in mInputCmd which will appear in the next
// NyquistInputDialog. Copy to mCmd for possible embedding in
// "function main() begin ... end":
mCmd = mInputCmd = dlog.GetCommand();
// Is this LISP or SAL? Both allow comments. After comments, LISP
// must begin with "(". Technically, a LISP expression could be a
// symbol or number or string, etc., but these are not really
// useful expressions. If the input begins with a symbol, number,
// or string, etc., it is more likely an erroneous attempt to type
// a SAL expression (which should probably begin with "return"),
// so we will treat it as SAL.
// this is a state machine to scan past LISP comments and white
// space to find the first real character of LISP or SAL. Note
// that #| ... |# style comments are not valid in SAL, so we do
// not skip these. Instead, "#|" indicates LISP if found.
//
unsigned int i = 0;
bool inComment = false; // handle "; ... \n" comments
while (i < mCmd.Len()) {
if (inComment) {
inComment = (mCmd[i] != wxT('\n'));
} else if (mCmd[i] == wxT(';')) {
inComment = true;
} else if (!wxIsspace(mCmd[i])) {
break; // found the first non-comment, non-space character
}
i++;
}
// invariant: i == mCmd.Len() |
// mCmd[i] is first non-comment, non-space character
mIsSal = false;
if (mCmd.Len() > i && mCmd[i] != wxT('(') &&
(mCmd[i] != wxT('#') || mCmd.Len() <= i + 1 ||
mCmd[i + 1] != wxT('|'))) {
mIsSal = true;
wxString cmdUp = mCmd.Upper();
int returnLoc = cmdUp.Find(wxT("RETURN"));
if (returnLoc == wxNOT_FOUND) {
wxMessageBox(_("Your code looks like SAL syntax, but there is no return statement. Either use a return statement such as\n\treturn s * 0.1\nfor SAL, or begin with an open parenthesis such as\n\t(mult s 0.1)\n for LISP."), _("Error in Nyquist code"), wxOK | wxCENTRE);
return false;
}
}
return true;
}
if (!mExternal) {
if (mFileName.GetModificationTime().IsLaterThan(mFileModified)) {
ParseFile();
mFileModified = mFileName.GetModificationTime();
}
}
if (mControls.GetCount() == 0) {
return true;
}
for (unsigned int i = 0; i < mControls.GetCount(); i++) {
NyqControl *ctrl = &mControls[i];
if (ctrl->type == NYQ_CTRL_STRING) {
continue;
}
if (ctrl->val == UNINITIALIZED_CONTROL) {
ctrl->val = GetCtrlValue(ctrl->valStr);
}
if (ctrl->type == NYQ_CTRL_CHOICE) {
continue;
}
ctrl->low = GetCtrlValue(ctrl->lowStr);
ctrl->high = GetCtrlValue(ctrl->highStr);
if (ctrl->high < ctrl->low) {
ctrl->high = ctrl->low + 1;
}
if (ctrl->val < ctrl->low) {
ctrl->val = ctrl->low;
}
if (ctrl->val > ctrl->high) {
ctrl->val = ctrl->high;
}
ctrl->ticks = 1000;
if (ctrl->type == NYQ_CTRL_INT &&
(ctrl->high - ctrl->low < ctrl->ticks)) {
ctrl->ticks = (int)(ctrl->high - ctrl->low);
}
}
NyquistDialog dlog(mParent, -1, mName, mInfo, &mControls);
dlog.CentreOnParent();
int result = dlog.ShowModal();
if (result == wxID_CANCEL) {
return false;
}
/* if (result == eDebugID) {
mDebug = true;
} */
mDebug = (result == eDebugID);
return true;
}
wxHtmlTagsCache::wxHtmlTagsCache(const wxString& source)
{
m_Cache = new wxHtmlTagsCacheData;
m_CachePos = 0;
wxChar tagBuffer[256];
const wxString::const_iterator end = source.end();
for ( wxString::const_iterator pos = source.begin(); pos < end; ++pos )
{
if (*pos != wxT('<'))
continue;
// possible tag start found:
// don't cache comment tags
if ( wxHtmlParser::SkipCommentTag(pos, end) )
continue;
// Remember the starting tag position.
wxString::const_iterator stpos = pos++;
// And look for the ending one.
int i;
for ( i = 0;
pos < end && i < (int)WXSIZEOF(tagBuffer) - 1 &&
*pos != wxT('>') && !wxIsspace(*pos);
++i, ++pos )
{
tagBuffer[i] = (wxChar)wxToupper(*pos);
}
tagBuffer[i] = wxT('\0');
while (pos < end && *pos != wxT('>'))
++pos;
if ( pos == end )
{
// We didn't find a closing bracket, this is not a valid tag after
// all. Notice that we need to roll back pos to avoid creating an
// invalid iterator when "++pos" is done in the loop statement.
--pos;
continue;
}
// We have a valid tag, add it to the cache.
size_t tg = Cache().size();
Cache().push_back(wxHtmlCacheItem());
Cache()[tg].Key = stpos;
Cache()[tg].Name = new wxChar[i+1];
memcpy(Cache()[tg].Name, tagBuffer, (i+1)*sizeof(wxChar));
if ((stpos+1) < end && *(stpos+1) == wxT('/')) // ending tag:
{
Cache()[tg].type = wxHtmlCacheItem::Type_EndingTag;
// find matching begin tag:
for (i = tg; i >= 0; i--)
{
if ((Cache()[i].type == wxHtmlCacheItem::Type_NoMatchingEndingTag) && (wxStrcmp(Cache()[i].Name, tagBuffer+1) == 0))
{
Cache()[i].type = wxHtmlCacheItem::Type_Normal;
Cache()[i].End1 = stpos;
Cache()[i].End2 = pos + 1;
break;
}
}
}
else
{
Cache()[tg].type = wxHtmlCacheItem::Type_NoMatchingEndingTag;
if (wxIsCDATAElement(tagBuffer))
{
// store the orig pos in case we are missing the closing
// tag (see below)
const wxString::const_iterator old_pos = pos;
bool foundCloseTag = false;
// find next matching tag
int tag_len = wxStrlen(tagBuffer);
while (pos < end)
{
// find the ending tag
while (pos + 1 < end &&
(*pos != '<' || *(pos+1) != '/'))
++pos;
if (*pos == '<')
++pos;
// see if it matches
int match_pos = 0;
while (pos < end && match_pos < tag_len )
{
wxChar c = *pos;
if ( c == '>' || c == '<' )
break;
// cast to wxChar needed to suppress warning in
// Unicode build
if ((wxChar)wxToupper(c) == tagBuffer[match_pos])
{
++match_pos;
}
else if (c == wxT(' ') || c == wxT('\n') ||
c == wxT('\r') || c == wxT('\t'))
{
// need to skip over these
}
else
{
match_pos = 0;
}
++pos;
}
// found a match
if (match_pos == tag_len)
{
pos = pos - tag_len - 3;
foundCloseTag = true;
break;
}
else // keep looking for the closing tag
{
++pos;
}
}
if (!foundCloseTag)
{
// we didn't find closing tag; this means the markup
// is incorrect and the best thing we can do is to
// ignore the unclosed tag and continue parsing as if
// it didn't exist:
pos = old_pos;
}
}
}
}
// ok, we're done, now we'll free .Name members of cache - we don't need it anymore:
for ( wxHtmlTagsCacheData::iterator i = Cache().begin();
i != Cache().end(); ++i )
{
wxDELETEA(i->Name);
}
}
long wxExecute( const wxString& command, int flags, wxProcess *process )
{
wxCHECK_MSG( !command.empty(), 0, wxT("can't exec empty command") );
wxLogDebug(wxString(wxT("Launching: ")) + command);
#if wxUSE_THREADS
// fork() doesn't mix well with POSIX threads: on many systems the program
// deadlocks or crashes for some reason. Probably our code is buggy and
// doesn't do something which must be done to allow this to work, but I
// don't know what yet, so for now just warn the user (this is the least we
// can do) about it
wxASSERT_MSG( wxThread::IsMain(),
_T("wxExecute() can be called only from the main thread") );
#endif // wxUSE_THREADS
int argc = 0;
wxChar *argv[WXEXECUTE_NARGS];
wxString argument;
const wxChar *cptr = command.c_str();
wxChar quotechar = wxT('\0'); // is arg quoted?
bool escaped = false;
// split the command line in arguments
do
{
argument=wxT("");
quotechar = wxT('\0');
// eat leading whitespace:
while ( wxIsspace(*cptr) )
cptr++;
if ( *cptr == wxT('\'') || *cptr == wxT('"') )
quotechar = *cptr++;
do
{
if ( *cptr == wxT('\\') && ! escaped )
{
escaped = true;
cptr++;
continue;
}
// all other characters:
argument += *cptr++;
escaped = false;
// have we reached the end of the argument?
if ( (*cptr == quotechar && ! escaped)
|| (quotechar == wxT('\0') && wxIsspace(*cptr))
|| *cptr == wxT('\0') )
{
wxASSERT_MSG( argc < WXEXECUTE_NARGS,
wxT("too many arguments in wxExecute") );
argv[argc] = new wxChar[argument.length() + 1];
wxStrcpy(argv[argc], argument.c_str());
argc++;
// if not at end of buffer, swallow last character:
if(*cptr)
cptr++;
break; // done with this one, start over
}
} while(*cptr);
} while(*cptr);
argv[argc] = NULL;
long lRc;
#if defined(__DARWIN__)
// wxMacExecute only executes app bundles.
// It returns an error code if the target is not an app bundle, thus falling
// through to the regular wxExecute for non app bundles.
lRc = wxMacExecute(argv, flags, process);
if( lRc != ((flags & wxEXEC_SYNC) ? -1 : 0))
return lRc;
#endif
// do execute the command
lRc = wxExecute(argv, flags, process);
// clean up
argc = 0;
while( argv[argc] )
delete [] argv[argc++];
return lRc;
}
wx28HtmlTagsCache::wx28HtmlTagsCache(const wxString& source)
{
const wxChar *src = source.c_str();
int lng = source.length();
wxChar tagBuffer[256];
m_Cache = NULL;
m_CacheSize = 0;
m_CachePos = 0;
int pos = 0;
while (pos < lng)
{
if (src[pos] == wxT('<')) // tag found:
{
if (m_CacheSize % CACHE_INCREMENT == 0)
m_Cache = (wx28HtmlCacheItem*) realloc(m_Cache, (m_CacheSize + CACHE_INCREMENT) * sizeof(wx28HtmlCacheItem));
int tg = m_CacheSize++;
int stpos = pos++;
m_Cache[tg].Key = stpos;
int i;
for ( i = 0;
pos < lng && i < (int)WXSIZEOF(tagBuffer) - 1 &&
src[pos] != wxT('>') && !wxIsspace(src[pos]);
i++, pos++ )
{
tagBuffer[i] = (wxChar)wxToupper(src[pos]);
}
tagBuffer[i] = wxT('\0');
m_Cache[tg].Name = new wxChar[i+1];
memcpy(m_Cache[tg].Name, tagBuffer, (i+1)*sizeof(wxChar));
while (pos < lng && src[pos] != wxT('>')) pos++;
if (src[stpos+1] == wxT('/')) // ending tag:
{
m_Cache[tg].End1 = m_Cache[tg].End2 = -2;
// find matching begin tag:
for (i = tg; i >= 0; i--)
if ((m_Cache[i].End1 == -1) && (wxStrcmp(m_Cache[i].Name, tagBuffer+1) == 0))
{
m_Cache[i].End1 = stpos;
m_Cache[i].End2 = pos + 1;
break;
}
}
else
{
m_Cache[tg].End1 = m_Cache[tg].End2 = -1;
if (wxIsCDATAElement(tagBuffer))
{
// store the orig pos in case we are missing the closing
// tag (see below)
wxInt32 old_pos = pos;
bool foundCloseTag = false;
// find next matching tag
int tag_len = wxStrlen(tagBuffer);
while (pos < lng)
{
// find the ending tag
while (pos + 1 < lng &&
(src[pos] != '<' || src[pos+1] != '/'))
++pos;
if (src[pos] == '<')
++pos;
// see if it matches
int match_pos = 0;
while (pos < lng && match_pos < tag_len && src[pos] != '>' && src[pos] != '<') {
// cast to wxChar needed to suppress warning in
// Unicode build
if ((wxChar)wxToupper(src[pos]) == tagBuffer[match_pos]) {
++match_pos;
}
else if (src[pos] == wxT(' ') || src[pos] == wxT('\n') ||
src[pos] == wxT('\r') || src[pos] == wxT('\t')) {
// need to skip over these
}
else {
match_pos = 0;
}
++pos;
}
// found a match
if (match_pos == tag_len)
{
pos = pos - tag_len - 3;
foundCloseTag = true;
break;
}
else // keep looking for the closing tag
{
++pos;
}
}
if (!foundCloseTag)
{
// we didn't find closing tag; this means the markup
// is incorrect and the best thing we can do is to
// ignore the unclosed tag and continue parsing as if
// it didn't exist:
pos = old_pos;
}
}
}
}
pos++;
}
// ok, we're done, now we'll free .Name members of cache - we don't need it anymore:
for (int i = 0; i < m_CacheSize; i++)
{
delete[] m_Cache[i].Name;
m_Cache[i].Name = NULL;
}
}
void wxFileConfig::Parse(wxTextFile& file, bool bLocal)
{
const wxChar *pStart;
const wxChar *pEnd;
wxString strLine;
size_t nLineCount = file.GetLineCount();
for ( size_t n = 0; n < nLineCount; n++ ) {
strLine = file[n];
// add the line to linked list
if ( bLocal )
LineListAppend(strLine);
// skip leading spaces
for ( pStart = strLine; wxIsspace(*pStart); pStart++ )
;
// skip blank/comment lines
if ( *pStart == wxT('\0')|| *pStart == wxT(';') || *pStart == wxT('#') )
continue;
if ( *pStart == wxT('[') ) { // a new group
pEnd = pStart;
while ( *++pEnd != wxT(']') ) {
if ( *pEnd == wxT('\\') ) {
// the next char is escaped, so skip it even if it is ']'
pEnd++;
}
if ( *pEnd == wxT('\n') || *pEnd == wxT('\0') ) {
// we reached the end of line, break out of the loop
break;
}
}
if ( *pEnd != wxT(']') ) {
wxLogError(_("file '%s': unexpected character %c at line %d."),
file.GetName(), *pEnd, n + 1);
continue; // skip this line
}
// group name here is always considered as abs path
wxString strGroup;
pStart++;
strGroup << wxCONFIG_PATH_SEPARATOR
<< FilterInEntryName(wxString(pStart, pEnd - pStart));
// will create it if doesn't yet exist
SetPath(strGroup);
if ( bLocal )
m_pCurrentGroup->SetLine(m_linesTail);
// check that there is nothing except comments left on this line
bool bCont = TRUE;
while ( *++pEnd != wxT('\0') && bCont ) {
switch ( *pEnd ) {
case wxT('#'):
case wxT(';'):
bCont = FALSE;
break;
case wxT(' '):
case wxT('\t'):
// ignore whitespace ('\n' impossible here)
break;
default:
wxLogWarning(_("file '%s', line %d: '%s' ignored after group header."),
file.GetName(), n + 1, pEnd);
bCont = FALSE;
}
}
}
else { // a key
const wxChar *pEnd = pStart;
while ( *pEnd && *pEnd != wxT('=') && !wxIsspace(*pEnd) ) {
if ( *pEnd == wxT('\\') ) {
// next character may be space or not - still take it because it's
// quoted (unless there is nothing)
pEnd++;
if ( !*pEnd ) {
// the error message will be given below anyhow
break;
}
}
pEnd++;
}
wxString strKey(FilterInEntryName(wxString(pStart, pEnd)));
// skip whitespace
while ( wxIsspace(*pEnd) )
pEnd++;
if ( *pEnd++ != wxT('=') ) {
wxLogError(_("file '%s', line %d: '=' expected."),
file.GetName(), n + 1);
}
else {
ConfigEntry *pEntry = m_pCurrentGroup->FindEntry(strKey);
if ( pEntry == NULL ) {
// new entry
pEntry = m_pCurrentGroup->AddEntry(strKey, n);
if ( bLocal )
pEntry->SetLine(m_linesTail);
}
else {
if ( bLocal && pEntry->IsImmutable() ) {
// immutable keys can't be changed by user
wxLogWarning(_("file '%s', line %d: value for immutable key '%s' ignored."),
file.GetName(), n + 1, strKey.c_str());
continue;
}
// the condition below catches the cases (a) and (b) but not (c):
// (a) global key found second time in global file
// (b) key found second (or more) time in local file
// (c) key from global file now found in local one
// which is exactly what we want.
else if ( !bLocal || pEntry->IsLocal() ) {
wxLogWarning(_("file '%s', line %d: key '%s' was first found at line %d."),
file.GetName(), n + 1, strKey.c_str(), pEntry->Line());
if ( bLocal )
pEntry->SetLine(m_linesTail);
}
}
// skip whitespace
while ( wxIsspace(*pEnd) )
pEnd++;
if ( GetStyle() & wxCONFIG_USE_NO_ESCAPE_CHARACTERS )
pEntry->SetValue(pEnd, FALSE /* read from file, without escapes */);
else
pEntry->SetValue(FilterInValue(pEnd), FALSE /* read from file, with escapes */);
//pEntry->SetValue(FilterInValue(pEnd), FALSE /* read from file */);
}
}
}
}