char * __init xen_memory_setup(void)
{
unsigned long max_pfn = xen_start_info->nr_pages;
max_pfn = min(MAX_DOMAIN_PAGES, max_pfn);
e820.nr_map = 0;
e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
/*
* Even though this is normal, usable memory under Xen, reserve
* ISA memory anyway because too many things think they can poke
* about in there.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
/*
* Reserve Xen bits:
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
*/
memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
__pa(xen_start_info->pt_base),
"XEN START INFO");
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
xen_return_unused_memory(xen_start_info->nr_pages, &e820);
return "Xen";
}
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
**/
char * __init xen_memory_setup(void)
{
static struct e820entry map[E820MAX] __initdata;
static struct e820entry map_raw[E820MAX] __initdata;
unsigned long max_pfn = xen_start_info->nr_pages;
unsigned long long mem_end;
int rc;
struct xen_memory_map memmap;
unsigned long extra_pages = 0;
unsigned long extra_limit;
unsigned long identity_pages = 0;
int i;
int op;
max_pfn = min(MAX_DOMAIN_PAGES, max_pfn);
mem_end = PFN_PHYS(max_pfn);
memmap.nr_entries = E820MAX;
set_xen_guest_handle(memmap.buffer, map);
op = xen_initial_domain() ?
XENMEM_machine_memory_map :
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
/* 8MB slack (to balance backend allocations). */
map[0].size += 8ULL << 20;
map[0].type = E820_RAM;
rc = 0;
}
BUG_ON(rc);
memcpy(map_raw, map, sizeof(map));
e820.nr_map = 0;
xen_extra_mem_start = mem_end;
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end;
/* Guard against non-page aligned E820 entries. */
if (map[i].type == E820_RAM)
map[i].size -= (map[i].size + map[i].addr) % PAGE_SIZE;
end = map[i].addr + map[i].size;
if (map[i].type == E820_RAM && end > mem_end) {
/* RAM off the end - may be partially included */
u64 delta = min(map[i].size, end - mem_end);
map[i].size -= delta;
end -= delta;
extra_pages += PFN_DOWN(delta);
/*
* Set RAM below 4GB that is not for us to be unusable.
* This prevents "System RAM" address space from being
* used as potential resource for I/O address (happens
* when 'allocate_resource' is called).
*/
if (delta &&
(xen_initial_domain() && end < 0x100000000ULL))
e820_add_region(end, delta, E820_UNUSABLE);
}
if (map[i].size > 0 && end > xen_extra_mem_start)
xen_extra_mem_start = end;
/* Add region if any remains */
if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
/* Align the balloon area so that max_low_pfn does not get set
* to be at the _end_ of the PCI gap at the far end (fee01000).
* Note that xen_extra_mem_start gets set in the loop above to be
* past the last E820 region. */
if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32)))
xen_extra_mem_start = (1ULL<<32);
/*
* In domU, the ISA region is normal, usable memory, but we
* reserve ISA memory anyway because too many things poke
* about in there.
*
* In Dom0, the host E820 information can leave gaps in the
* ISA range, which would cause us to release those pages. To
* avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
/*
* Reserve Xen bits:
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
*/
memblock_reserve(__pa(xen_start_info->mfn_list),
xen_start_info->pt_base - xen_start_info->mfn_list);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
extra_limit = xen_get_max_pages();
if (max_pfn + extra_pages > extra_limit) {
if (extra_limit > max_pfn)
extra_pages = extra_limit - max_pfn;
else
extra_pages = 0;
}
extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
/*
* Clamp the amount of extra memory to a EXTRA_MEM_RATIO
* factor the base size. On non-highmem systems, the base
* size is the full initial memory allocation; on highmem it
* is limited to the max size of lowmem, so that it doesn't
* get completely filled.
*
* In principle there could be a problem in lowmem systems if
* the initial memory is also very large with respect to
* lowmem, but we won't try to deal with that here.
*/
extra_limit = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
max_pfn + extra_pages);
if (extra_limit >= max_pfn)
extra_pages = extra_limit - max_pfn;
else
extra_pages = 0;
xen_add_extra_mem(extra_pages);
/*
* Set P2M for all non-RAM pages and E820 gaps to be identity
* type PFNs. We supply it with the non-sanitized version
* of the E820.
*/
identity_pages = xen_set_identity(map_raw, memmap.nr_entries);
printk(KERN_INFO "Set %ld page(s) to 1-1 mapping.\n", identity_pages);
return "Xen";
}
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
**/
char * __init xen_memory_setup(void)
{
static struct e820entry map[E820MAX] __initdata;
unsigned long max_pfn = xen_start_info->nr_pages;
unsigned long long mem_end;
int rc;
struct xen_memory_map memmap;
unsigned long extra_pages = 0;
unsigned long extra_limit;
int i;
int op;
max_pfn = min(MAX_DOMAIN_PAGES, max_pfn);
mem_end = PFN_PHYS(max_pfn);
memmap.nr_entries = E820MAX;
set_xen_guest_handle(memmap.buffer, map);
op = xen_initial_domain() ?
XENMEM_machine_memory_map :
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
/* 8MB slack (to balance backend allocations). */
map[0].size += 8ULL << 20;
map[0].type = E820_RAM;
rc = 0;
}
BUG_ON(rc);
e820.nr_map = 0;
xen_extra_mem_start = mem_end;
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end = map[i].addr + map[i].size;
if (map[i].type == E820_RAM) {
if (map[i].addr < mem_end && end > mem_end) {
/* Truncate region to max_mem. */
u64 delta = end - mem_end;
map[i].size -= delta;
extra_pages += PFN_DOWN(delta);
end = mem_end;
}
}
if (end > xen_extra_mem_start)
xen_extra_mem_start = end;
/* If region is non-RAM or below mem_end, add what remains */
if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
/*
* In domU, the ISA region is normal, usable memory, but we
* reserve ISA memory anyway because too many things poke
* about in there.
*
* In Dom0, the host E820 information can leave gaps in the
* ISA range, which would cause us to release those pages. To
* avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
/*
* Reserve Xen bits:
* - mfn_list
* - xen_start_info
* See comment above "struct start_info" in <xen/interface/xen.h>
*/
memblock_x86_reserve_range(__pa(xen_start_info->mfn_list),
__pa(xen_start_info->pt_base),
"XEN START INFO");
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
/*
* Clamp the amount of extra memory to a EXTRA_MEM_RATIO
* factor the base size. On non-highmem systems, the base
* size is the full initial memory allocation; on highmem it
* is limited to the max size of lowmem, so that it doesn't
* get completely filled.
*
* In principle there could be a problem in lowmem systems if
* the initial memory is also very large with respect to
* lowmem, but we won't try to deal with that here.
*/
extra_limit = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
max_pfn + extra_pages);
if (extra_limit >= max_pfn)
extra_pages = extra_limit - max_pfn;
else
extra_pages = 0;
if (!xen_initial_domain())
xen_add_extra_mem(extra_pages);
return "Xen";
}
