boolean lives_yuv_stream_start_write(lives_yuv4m_t *yuv4mpeg, const char *filename, int hsize, int vsize, double fps) {
int i;
if (mainw->fixed_fpsd>-1.&&mainw->fixed_fpsd!=fps) {
do_error_dialog(lives_strdup_printf(_("Unable to set display framerate to %.3f fps.\n\n"),fps));
return FALSE;
}
mainw->fixed_fpsd=fps;
if (filename==NULL) filename=lives_strdup_printf("%s/streamout.yuv",prefs->tmpdir);
// TODO - do_threaded_dialog
if ((yuvout=creat(filename,O_CREAT))<0) {
do_error_dialog(lives_strdup_printf(_("Unable to open yuv4mpeg out stream %s\n"),filename));
return FALSE;
}
if (mainw->fixed_fpsd>23.9999&&mainw->fixed_fpsd<24.0001) {
y4m_si_set_framerate(&(yuv4mpeg->streaminfo),y4m_fps_FILM);
} else return FALSE;
y4m_si_set_interlace(&(yuv4mpeg->streaminfo), Y4M_ILACE_NONE);
y4m_si_set_width(&(yuv4mpeg->streaminfo), (hsize_out=hsize));
y4m_si_set_height(&(yuv4mpeg->streaminfo), (vsize_out=vsize));
y4m_si_set_sampleaspect(&(yuv4mpeg->streaminfo), yuv4mpeg->sar);
i = y4m_write_stream_header(yuvout, &(yuv4mpeg->streaminfo));
if (i != Y4M_OK) return FALSE;
return TRUE;
}
static
void setup_output_stream(int fdout, cl_info_t *cl,
y4m_stream_info_t *sinfo, ppm_info_t *ppm,
int *field_height)
{
int err;
int x_alignment = y4m_chroma_ss_x_ratio(cl->ss_mode).d;
int y_alignment = y4m_chroma_ss_y_ratio(cl->ss_mode).d;
if (cl->interlace != Y4M_ILACE_NONE)
y_alignment *= 2;
if ((ppm->width % x_alignment) != 0) {
mjpeg_error_exit1("PPM width (%d) is not a multiple of %d!",
ppm->width, x_alignment);
}
if ((ppm->height % y_alignment) != 0) {
mjpeg_error_exit1("PPM height (%d) is not a multiple of %d!",
ppm->height, y_alignment);
}
y4m_si_set_width(sinfo, ppm->width);
if (cl->interlace == Y4M_ILACE_NONE) {
y4m_si_set_height(sinfo, ppm->height);
*field_height = ppm->height;
} else if (cl->interleave) {
y4m_si_set_height(sinfo, ppm->height);
*field_height = ppm->height / 2;
} else {
y4m_si_set_height(sinfo, ppm->height * 2);
*field_height = ppm->height;
}
y4m_si_set_sampleaspect(sinfo, cl->aspect);
y4m_si_set_interlace(sinfo, cl->interlace);
y4m_si_set_framerate(sinfo, cl->framerate);
y4m_si_set_chroma(sinfo, cl->ss_mode);
if ((err = y4m_write_stream_header(fdout, sinfo)) != Y4M_OK)
mjpeg_error_exit1("Write header failed: %s", y4m_strerr(err));
mjpeg_info("Output Stream parameters:");
y4m_log_stream_info(mjpeg_loglev_t("info"), " ", sinfo);
}
static int tc_y4m_open_video(Y4MPrivateData *pd, const char *filename,
vob_t *vob)
{
int asr, ret;
y4m_ratio_t framerate;
y4m_ratio_t asr_rate;
/* avoid fd loss in case of failed configuration */
if (pd->fd_vid == -1) {
pd->fd_vid = open(filename,
O_RDWR|O_CREAT|O_TRUNC,
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
if (pd->fd_vid == -1) {
tc_log_error(MOD_NAME, "failed to open video stream file '%s'"
" (reason: %s)", filename,
strerror(errno));
return TC_ERROR;
}
}
y4m_init_stream_info(&(pd->streaminfo));
//note: this is the real framerate of the raw stream
framerate = (vob->ex_frc == 0) ?mpeg_conform_framerate(vob->ex_fps)
:mpeg_framerate(vob->ex_frc);
if (framerate.n == 0 && framerate.d == 0) {
framerate.n = vob->ex_fps * 1000;
framerate.d = 1000;
}
asr = (vob->ex_asr < 0) ?vob->im_asr :vob->ex_asr;
tc_asr_code_to_ratio(asr, &asr_rate.n, &asr_rate.d);
y4m_init_stream_info(&(pd->streaminfo));
y4m_si_set_framerate(&(pd->streaminfo), framerate);
if (vob->encode_fields == TC_ENCODE_FIELDS_TOP_FIRST) {
y4m_si_set_interlace(&(pd->streaminfo), Y4M_ILACE_TOP_FIRST);
} else if (vob->encode_fields == TC_ENCODE_FIELDS_BOTTOM_FIRST) {
y4m_si_set_interlace(&(pd->streaminfo), Y4M_ILACE_BOTTOM_FIRST);
} else if (vob->encode_fields == TC_ENCODE_FIELDS_PROGRESSIVE) {
y4m_si_set_interlace(&(pd->streaminfo), Y4M_ILACE_NONE);
}
/* XXX */
y4m_si_set_sampleaspect(&(pd->streaminfo),
y4m_guess_sar(pd->width,
pd->height,
asr_rate));
y4m_si_set_height(&(pd->streaminfo), pd->height);
y4m_si_set_width(&(pd->streaminfo), pd->width);
/* Y4M_CHROMA_420JPEG 4:2:0, H/V centered, for JPEG/MPEG-1 */
/* Y4M_CHROMA_420MPEG2 4:2:0, H cosited, for MPEG-2 */
/* Y4M_CHROMA_420PALDV 4:2:0, alternating Cb/Cr, for PAL-DV */
y4m_si_set_chroma(&(pd->streaminfo), Y4M_CHROMA_420JPEG); // XXX
ret = y4m_write_stream_header(pd->fd_vid, &(pd->streaminfo));
if (ret != Y4M_OK) {
tc_log_warn(MOD_NAME, "failed to write video YUV4MPEG2 header: %s",
y4m_strerr(ret));
return TC_ERROR;
}
return TC_OK;
}
int
main(int argc, char **argv)
{
int fdin, fdout, err, c, i, verbose = 1;
y4m_stream_info_t istream, ostream;
y4m_frame_info_t iframe;
fdin = fileno(stdin);
fdout = fileno(stdout);
y4m_accept_extensions(1);
y4m_init_stream_info(&istream);
y4m_init_frame_info(&iframe);
while ((c = getopt(argc, argv, "L:C:hv:N")) != EOF)
{
switch (c)
{
case 'N':
lowuv = lowy = 0;
lowuv = highy = 255;
break;
case 'L':
i = sscanf(optarg, "%lf,%lf,%d", &y_radius,
&y_amount, &y_threshold);
if (i != 3)
{
mjpeg_error("-L r,a,t");
usage(argv[0]);
}
break;
case 'C':
i = sscanf(optarg, "%lf,%lf,%d", &uv_radius,
&uv_amount, &uv_threshold);
if (i != 3)
{
mjpeg_error("-C r,a,t");
usage(argv[0]);
}
break;
case 'v':
verbose = atoi(optarg);
if (verbose < 0 || verbose > 2)
mjpeg_error_exit1("-v 0|1|2");
break;
case 'h':
default:
usage(argv[0]);
break;
}
}
if (isatty(fdout))
mjpeg_error_exit1("stdout must not be a terminal");
mjpeg_default_handler_verbosity(verbose);
err = y4m_read_stream_header(fdin, &istream);
if (err != Y4M_OK)
mjpeg_error_exit1("Couldn't read input stream header");
switch (y4m_si_get_interlace(&istream))
{
case Y4M_ILACE_NONE:
interlaced = 0;
break;
case Y4M_ILACE_BOTTOM_FIRST:
case Y4M_ILACE_TOP_FIRST:
interlaced = 1;
break;
default:
mjpeg_error_exit1("Unsupported/unknown interlacing");
}
if (y4m_si_get_plane_count(&istream) != 3)
mjpeg_error_exit1("Only 3 plane formats supported");
yheight = y4m_si_get_plane_height(&istream, 0);
uvheight = y4m_si_get_plane_height(&istream, 1);
ywidth = y4m_si_get_plane_width(&istream, 0);
uvwidth = y4m_si_get_plane_width(&istream, 1);
ylen = y4m_si_get_plane_length(&istream, 0);
uvlen = y4m_si_get_plane_length(&istream, 1);
/* Input and output frame buffers */
i_yuv[0] = (u_char *)malloc(ylen);
i_yuv[1] = (u_char *)malloc(uvlen);
i_yuv[2] = (u_char *)malloc(uvlen);
o_yuv[0] = (u_char *)malloc(ylen);
o_yuv[1] = (u_char *)malloc(uvlen);
o_yuv[2] = (u_char *)malloc(uvlen);
/*
* general purpose row/column scratch buffers. Slightly over allocated to
* simplify life.
*/
cur_col = (u_char *)malloc(MAX(ywidth, yheight));
dest_col = (u_char *)malloc(MAX(ywidth, yheight));
cur_row = (u_char *)malloc(MAX(ywidth, yheight));
dest_row = (u_char *)malloc(MAX(ywidth, yheight));
/*
* Generate the convolution matrices. The generation routine allocates the
* memory and returns the length.
*/
cmatrix_y_len = gen_convolve_matrix(y_radius, &cmatrix_y);
cmatrix_uv_len = gen_convolve_matrix(uv_radius, &cmatrix_uv);
ctable_y = gen_lookup_table(cmatrix_y, cmatrix_y_len);
ctable_uv = gen_lookup_table(cmatrix_uv, cmatrix_uv_len);
y4m_init_stream_info(&ostream);
y4m_copy_stream_info(&ostream, &istream);
y4m_write_stream_header(fileno(stdout), &ostream);
mjpeg_info("Luma radius: %f", y_radius);
mjpeg_info("Luma amount: %f", y_amount);
mjpeg_info("Luma threshold: %d", y_threshold);
if (uv_radius != -1.0)
{
mjpeg_info("Chroma radius: %f", uv_radius);
mjpeg_info("Chroma amount: %f", uv_amount);
mjpeg_info("Chroma threshold: %d", uv_threshold);
}
for (frameno = 0; y4m_read_frame(fdin, &istream, &iframe, i_yuv) == Y4M_OK; frameno++)
{
y4munsharp();
err = y4m_write_frame(fdout, &ostream, &iframe, o_yuv);
if (err != Y4M_OK)
{
mjpeg_error("y4m_write_frame err at frame %d", frameno);
break;
}
}
y4m_fini_frame_info(&iframe);
y4m_fini_stream_info(&istream);
y4m_fini_stream_info(&ostream);
exit(0);
}
int
main (int argc, char *argv[])
{
extern char *optarg;
int cpucap = cpu_accel ();
char c;
int fd_in = 0;
int fd_out = 1;
int errno = 0;
int have_framerate = 0;
int force_interlacing = 0;
y4m_frame_info_t iframeinfo;
y4m_stream_info_t istreaminfo;
y4m_frame_info_t oframeinfo;
y4m_stream_info_t ostreaminfo;
int output_frame_number = 0;
int input_frame_number = 0;
y4m_ratio_t output_frame_rate, input_frame_rate, frame_rate_ratio;
float ratio = 0; // input/output, output should be > input )
int scene_change;
y4m_ratio_t ratio_percent_frame;
float percent_threshold = 0.02;
/* percent_threshold is there to avoid interpolating frames when the output frame
* is very close to an input frame
*/
mjpeg_log (LOG_INFO, "-------------------------------------------------");
mjpeg_log (LOG_INFO, " Motion-Compensating-Frame-Rate-Converter ");
mjpeg_log (LOG_INFO, "-------------------------------------------------");
while ((c = getopt (argc, argv, "hvb:p:r:t:s:f")) != -1)
{
switch (c)
{
case 'h':
{
mjpeg_log (LOG_INFO, "Usage ");
mjpeg_log (LOG_INFO, "-------------------------");
mjpeg_log (LOG_INFO, " This program converts frame rates");
mjpeg_log (LOG_INFO,
"with a smart algorithm that estimates the motion of the elements");
mjpeg_log (LOG_INFO,
"to smooth the motion, rather than duplicating frames.");
mjpeg_log (LOG_INFO,
" It's way smoother, but introduces a bit of blocking and/or");
mjpeg_log (LOG_INFO,
" maybe blurryness when things move too fast.");
mjpeg_log (LOG_INFO, " ");
mjpeg_log (LOG_INFO,
" -r Frame rate for the resulting stream (in X:Y fractional form)");
mjpeg_log (LOG_INFO,
" -b block size (default = 8, will be rounded to even number )");
mjpeg_log (LOG_INFO,
" -p search path radius (default = 8, do not use high values ~ > 20)");
mjpeg_log (LOG_INFO,
"-t frame approximation threshold (default=50, higher=better)");
mjpeg_log (LOG_INFO,
"-s scene change threshold (default=8, 0=disable scene change detection)");
mjpeg_log (LOG_INFO,
"-r Frame rate for the resulting stream (in X:Y fractional form)");
mjpeg_log (LOG_INFO,
" -f force processing interlaced input (don't know what it does)");
mjpeg_log (LOG_INFO, " -v verbose/debug");
exit (0);
break;
}
case 'v':
{
verbose = 1;
break;
}
case 'f':
{
force_interlacing = 1;
break;
}
case 'b':
{
block_size = strtol (optarg, (char **) NULL, 10);
/* we only want even block sizes */
if (block_size % 1 != 0)
{
block_size = block_size + 1;
mjpeg_log (LOG_WARN, "Block size changed to %d", block_size);
}
else
mjpeg_log (LOG_INFO, "Block size: %d", block_size);
break;
}
case 'p':
{
search_path_radius = strtol (optarg, (char **) NULL, 10); /* safer atoi */
mjpeg_log (LOG_INFO, "Search radius %d", search_path_radius);
break;
}
case 'r':
{
if (Y4M_OK != y4m_parse_ratio (&output_frame_rate, optarg))
mjpeg_error_exit1
("Syntax for frame rate should be Numerator:Denominator");
mjpeg_log (LOG_INFO, "New Frame rate %d:%d",
output_frame_rate.n, output_frame_rate.d);
have_framerate = 1;
break;
}
case 't':
{
percent_threshold = strtol (optarg, (char **) NULL, 10);
if ((percent_threshold > 1) && (percent_threshold <= 1024))
percent_threshold = 1.0 / percent_threshold;
else
mjpeg_error_exit1 ("Threshold should be between 2 and 1024");
mjpeg_log (LOG_INFO, "Approximation threshold %d",
(int) ((float) 1.0 / percent_threshold));
break;
}
case 's':
{
scene_change_threshold = strtol (optarg, (char **) NULL, 10);
if (scene_change_threshold == 0)
mjpeg_log (LOG_INFO, "Scene change detection disabled");
else
mjpeg_log (LOG_INFO, "Scene change threshold: %d00 percent",
scene_change_threshold);
break;
}
}
}
if (!have_framerate)
{
mjpeg_error_exit1
("Please specify a frame rate; yuvmotionfps -h for more info");
}
/* initialize motion_library */
init_motion_search ();
/* initialize MMX transforms (fixme) */
if ((cpucap & ACCEL_X86_MMXEXT) != 0 || (cpucap & ACCEL_X86_SSE) != 0)
{
#if 0
mjpeg_log (LOG_INFO,
"FIXME: could use MMX/SSE Block/Frame-Copy/Blend if I had one ;-)");
#endif
}
/* initialize stream-information */
y4m_accept_extensions (1);
y4m_init_stream_info (&istreaminfo);
y4m_init_frame_info (&iframeinfo);
y4m_init_stream_info (&ostreaminfo);
y4m_init_frame_info (&oframeinfo);
/* open input stream */
if ((errno = y4m_read_stream_header (fd_in, &istreaminfo)) != Y4M_OK)
{
mjpeg_log (LOG_ERROR, "Couldn't read YUV4MPEG header: %s!",
y4m_strerr (errno));
exit (1);
}
/* get format information */
width = y4m_si_get_width (&istreaminfo);
height = y4m_si_get_height (&istreaminfo);
input_chroma_subsampling = y4m_si_get_chroma (&istreaminfo);
mjpeg_log (LOG_INFO, "Y4M-Stream is %ix%i(%s)",
width,
height,
input_chroma_subsampling ==
Y4M_CHROMA_420JPEG ? "4:2:0 MPEG1" : input_chroma_subsampling
==
Y4M_CHROMA_420MPEG2 ? "4:2:0 MPEG2" :
input_chroma_subsampling ==
Y4M_CHROMA_420PALDV ? "4:2:0 PAL-DV" :
input_chroma_subsampling ==
Y4M_CHROMA_444 ? "4:4:4" : input_chroma_subsampling ==
Y4M_CHROMA_422 ? "4:2:2" : input_chroma_subsampling ==
Y4M_CHROMA_411 ? "4:1:1 NTSC-DV" : input_chroma_subsampling
==
Y4M_CHROMA_MONO ? "MONOCHROME" : input_chroma_subsampling ==
Y4M_CHROMA_444ALPHA ? "4:4:4:4 ALPHA" : "unknown");
/* if chroma-subsampling isn't supported bail out ... */
switch (input_chroma_subsampling)
{
case Y4M_CHROMA_420JPEG:
break;
case Y4M_CHROMA_420PALDV:
case Y4M_CHROMA_420MPEG2:
case Y4M_CHROMA_411:
mjpeg_log (LOG_WARN,
"This chroma subsampling mode has not been thoroughly tested");
break;
default:
mjpeg_error_exit1
("Y4M-Stream is not 4:2:0. Other chroma-modes currently not allowed. Sorry.");
}
/* the output is progressive 4:2:0 MPEG 1 */
y4m_si_set_interlace (&ostreaminfo, Y4M_ILACE_NONE);
y4m_si_set_chroma (&ostreaminfo, Y4M_CHROMA_420JPEG);
y4m_si_set_width (&ostreaminfo, width);
y4m_si_set_height (&ostreaminfo, height);
y4m_si_set_sampleaspect (&ostreaminfo,
y4m_si_get_sampleaspect (&istreaminfo));
input_frame_rate = y4m_si_get_framerate (&istreaminfo);
y4m_si_set_framerate (&ostreaminfo, output_frame_rate);
if (width % block_size != 0)
{
mjpeg_log (LOG_WARN,
"Warning, stream width(%d) is not a multiple of block_size (%d)",
width, block_size);
mjpeg_log (LOG_WARN,
"The right side of the image might not be what you want");
}
if (height % block_size != 0)
{
mjpeg_log (LOG_WARN,
"Warning, stream height(%d) is not a multiple of block_size (%d)",
height, block_size);
mjpeg_log (LOG_WARN,
"The lower side of the image might not be what you want");
}
/* Calculate the different ratios:
* ratio is (input framerate / output framerate)
* ratio_percent_frame is the fractional representation of percent frame
*/
frame_rate_ratio.n = input_frame_rate.n * output_frame_rate.d;
frame_rate_ratio.d = input_frame_rate.d * output_frame_rate.n;
y4m_ratio_reduce (&frame_rate_ratio);
ratio = (float) frame_rate_ratio.n / frame_rate_ratio.d;
ratio_percent_frame.d = 1;
ratio_percent_frame.n = 0;
if (ratio == 0)
mjpeg_error_exit1 ("Cannot have ratio =0 ");
else if (ratio > 128)
mjpeg_error_exit1 ("Cannot have ratio >128 ");
if ((y4m_si_get_interlace (&istreaminfo) != Y4M_ILACE_NONE)
&& (!force_interlacing))
{
mjpeg_error_exit1 ("Sorry, can only convert progressive streams");
}
/* write the outstream header */
y4m_write_stream_header (fd_out, &ostreaminfo);
/* now allocate the needed buffers */
{
/* calculate the memory offset needed to allow the processing
* functions to overshot. The biggest overshot is needed for the
* MC-functions, so we'll use 8*width...
*/
buff_offset = width * 8;
buff_size = buff_offset * 2 + width * height;
inframe[0] = buff_offset + (uint8_t *) malloc (buff_size);
inframe[1] = buff_offset + (uint8_t *) malloc (buff_size);
inframe[2] = buff_offset + (uint8_t *) malloc (buff_size);
reconstructed[0] = buff_offset + (uint8_t *) malloc (buff_size);
reconstructed[1] = buff_offset + (uint8_t *) malloc (buff_size);
reconstructed[2] = buff_offset + (uint8_t *) malloc (buff_size);
frame1[0] = buff_offset + (uint8_t *) malloc (buff_size);
frame1[1] = buff_offset + (uint8_t *) malloc (buff_size);
frame1[2] = buff_offset + (uint8_t *) malloc (buff_size);
mjpeg_log (LOG_INFO, "Buffers allocated.");
}
/* initialize motion-search-pattern */
init_search_pattern ();
errno = y4m_read_frame (fd_in, &istreaminfo, &iframeinfo, frame1);
if (errno != Y4M_OK)
goto The_end;
/* read every frame until the end of the input stream and process it */
while (Y4M_OK == (errno = y4m_read_frame (fd_in,
&istreaminfo,
&iframeinfo, inframe)))
{
/* frame1 contains the previous input frame
* inframe contains the current input frame
* reconstructed contains the current output frame
* percent_frame is the amount of time after which the output frame is sent
* in percent of the time between input frames
*
* Input:
* frame1 . . . . . . . . . . . . . . . . . . inframe
* Output:
* . . . . . . . . . . .reconstructed. . . . . . .
* |<- - percent_frame - - - ->|
* |< - - - - - - - - - -100% - - - - - - - - - >|
*
* The variable ratio_percent_frame is the fractional representation of
* percent_frame; it is there to avoid rounding errors
*/
input_frame_number++;
if (verbose)
{
mjpeg_log (LOG_INFO, "Input frame number %d", input_frame_number);
}
while (percent_frame < (1.0 - percent_threshold))
{
output_frame_number++;
if (verbose)
{
mjpeg_log (LOG_INFO, "Output frame number %d",
output_frame_number);
}
#define ABS(value) ((value)<0)?-(value):(value)
if (ABS (percent_frame) <= percent_threshold)
{
/* I put a threshold here to avoid wasting time */
/* The output frame coincides with the input frame
* so there is no need to do any processing
* just copy the input frame as is */
y4m_write_frame (fd_out, &ostreaminfo, &oframeinfo, frame1);
if (verbose)
mjpeg_log (LOG_INFO, "Percent %f rounded to next frame",
percent_frame);
}
else
{
/* We have to interpolate the frame (between the current inframe
* and the previous frame1
* if there is a scene change, motion_compensate_field will
* return 1 and we use the previous frame */
if (verbose)
mjpeg_log (LOG_INFO, "Percent %f", percent_frame);
scene_change = motion_compensate_field ();
if (scene_change)
{
mjpeg_log (LOG_INFO, "Scene change at frame %d",
input_frame_number);
y4m_write_frame (fd_out, &ostreaminfo, &oframeinfo, frame1);
}
else
{
y4m_write_frame (fd_out, &ostreaminfo, &oframeinfo,
reconstructed);
}
}
ratio_percent_frame =
add_ratio (ratio_percent_frame, frame_rate_ratio);
percent_frame = Y4M_RATIO_DBL (ratio_percent_frame);
}
/* Skip input frames if downsampling (ratio > 1)
* when upsampling, ratio < 1
* so we have ( 1< percent_frame < 2) at this point
* hence we don't go in in the loop */
while (percent_frame >= 2)
{
percent_frame = percent_frame - 1;
ratio_percent_frame = ratio_minus_1 (ratio_percent_frame);
if (Y4M_OK !=
(errno =
y4m_read_frame (fd_in, &istreaminfo, &iframeinfo, inframe)))
goto The_end;
}
ratio_percent_frame = ratio_minus_1 (ratio_percent_frame);
percent_frame = percent_frame - 1;
/* store the previous frame */
memcpy (frame1[0], inframe[0], width * height);
memcpy (frame1[1], inframe[1], width * height / 4);
memcpy (frame1[2], inframe[2], width * height / 4);
}
The_end:
/* free allocated buffers */
{
free (inframe[0] - buff_offset);
free (inframe[1] - buff_offset);
free (inframe[2] - buff_offset);
free (reconstructed[0] - buff_offset);
free (reconstructed[1] - buff_offset);
free (reconstructed[2] - buff_offset);
free (frame1[0] - buff_offset);
free (frame1[1] - buff_offset);
free (frame1[2] - buff_offset);
mjpeg_log (LOG_INFO, "Buffers freed.");
}
/* did stream end unexpectedly ? */
if (errno != Y4M_ERR_EOF)
mjpeg_error_exit1 ("%s", y4m_strerr (errno));
/* Exit gently */
return (0);
}
int main(int argc, char **argv)
{
int i, c, interlace, frames, err;
int ywidth, yheight, uvwidth, uvheight, ylen, uvlen;
int verbose = 0, fdin;
int NlumaX = 4, NlumaY = 4, NchromaX = 4, NchromaY = 4;
float BWlumaX = 0.8, BWlumaY = 0.8, BWchromaX = 0.7, BWchromaY = 0.7;
struct filter *lumaXtaps, *lumaYtaps, *chromaXtaps, *chromaYtaps;
u_char *yuvinout[3];
float *yuvtmp1,*yuvtmp2;
y4m_stream_info_t istream, ostream;
y4m_frame_info_t iframe;
fdin = fileno(stdin);
y4m_accept_extensions(1);
/* read command line */
opterr = 0;
while ((c = getopt(argc, argv, "hvL:C:x:X:y:Y:")) != EOF)
{
switch (c)
{
case 'L':
sscanf(optarg,"%d,%f,%d,%f",&NlumaX,&BWlumaX,&NlumaY,&BWlumaY);
break;
case 'C':
sscanf(optarg,"%d,%f,%d,%f",&NchromaX,&BWchromaX,&NchromaY,&BWchromaY);
break;
case 'x':
sscanf(optarg,"%d,%f",&NchromaX,&BWchromaX);
break;
case 'X':
sscanf(optarg,"%d,%f",&NlumaX,&BWlumaX);
break;
case 'y':
sscanf(optarg,"%d,%f",&NchromaY,&BWchromaY);
break;
case 'Y':
sscanf(optarg,"%d,%f",&NlumaY,&BWlumaY);
break;
case 'v':
verbose++;
break;
case '?':
case 'h':
default:
usage();
}
}
if (BWlumaX <= 0.0 || BWlumaX > 1.0)
mjpeg_error_exit1("Horizontal luma bandwidth '%f' not >0 and <=1.0", BWlumaX);
if (BWlumaY <= 0.0 || BWlumaY > 1.0)
mjpeg_error_exit1("Vertical luma bandwidth '%f' not >0 and <=1.0", BWlumaY);
if (BWchromaX <= 0.0 || BWchromaX > 1.0)
mjpeg_error_exit1("Horizontal chroma bandwidth '%f' not >0 and <=1.0", BWchromaX);
if (BWchromaY <= 0.0 || BWchromaY > 1.0)
mjpeg_error_exit1("Vertical chroma bandwidth '%f' not >0 and <=1.0", BWchromaY);
/* initialize input stream and check chroma subsampling and interlacing */
y4m_init_stream_info(&istream);
y4m_init_frame_info(&iframe);
err = y4m_read_stream_header(fdin, &istream);
if (err != Y4M_OK)
mjpeg_error_exit1("Input stream error: %s\n", y4m_strerr(err));
if (y4m_si_get_plane_count(&istream) != 3)
mjpeg_error_exit1("Only the 3 plane formats supported");
i = y4m_si_get_interlace(&istream);
switch (i)
{
case Y4M_ILACE_NONE:
interlace = 0;
break;
case Y4M_ILACE_BOTTOM_FIRST:
case Y4M_ILACE_TOP_FIRST:
interlace = 1;
break;
default:
mjpeg_warn("Unknown interlacing '%d', assuming non-interlaced", i);
interlace = 0;
break;
}
ywidth = y4m_si_get_width(&istream); /* plane 0 = Y */
yheight = y4m_si_get_height(&istream);
ylen = ywidth * yheight;
uvwidth = y4m_si_get_plane_width(&istream, 1); /* planes 1&2 = U+V */
uvheight = y4m_si_get_plane_height(&istream, 1);
uvlen = y4m_si_get_plane_length(&istream, 1);
/* initialize output stream */
y4m_init_stream_info(&ostream);
y4m_copy_stream_info(&ostream, &istream);
y4m_write_stream_header(fileno(stdout), &ostream);
/* allocate input and output buffers */
yuvinout[0] = my_malloc(ylen*sizeof(u_char));
yuvinout[1] = my_malloc(uvlen*sizeof(u_char));
yuvinout[2] = my_malloc(uvlen*sizeof(u_char));
yuvtmp1 = my_malloc(MAX(ylen,uvlen)*sizeof(float));
yuvtmp2 = my_malloc(MAX(ylen,uvlen)*sizeof(float));
/* get filter taps */
lumaXtaps = get_coeff(NlumaX, BWlumaX);
lumaYtaps = get_coeff(NlumaY, BWlumaY);
chromaXtaps = get_coeff(NchromaX, BWchromaX);
chromaYtaps = get_coeff(NchromaY, BWchromaY);
set_accel(uvwidth,uvheight);
if (verbose)
y4m_log_stream_info(mjpeg_loglev_t("info"), "", &istream);
/* main processing loop */
for (frames=0; y4m_read_frame(fdin,&istream,&iframe,yuvinout) == Y4M_OK; frames++)
{
if (verbose && ((frames % 100) == 0))
mjpeg_info("Frame %d\n", frames);
convolveFrame(yuvinout[0],ywidth,yheight,interlace,lumaXtaps,lumaYtaps,yuvtmp1,yuvtmp2);
convolveFrame(yuvinout[1],uvwidth,uvheight,interlace,chromaXtaps,chromaYtaps,yuvtmp1,yuvtmp2);
convolveFrame(yuvinout[2],uvwidth,uvheight,interlace,chromaXtaps,chromaYtaps,yuvtmp1,yuvtmp2);
y4m_write_frame(fileno(stdout), &ostream, &iframe, yuvinout);
}
/* clean up */
y4m_fini_frame_info(&iframe);
y4m_fini_stream_info(&istream);
y4m_fini_stream_info(&ostream);
exit(0);
}
int main(int argc, char *argv[])
{
AVFormatContext *pFormatCtx;
AVInputFormat *avif = NULL;
int i, videoStream;
AVCodecContext *pCodecCtx;
AVCodec *pCodec;
AVFrame *pFrame;
AVFrame *pFrame444;
AVPacket packet;
int frameFinished;
int numBytes;
uint8_t *buffer;
int fdOut = 1 ;
int yuv_interlacing = Y4M_UNKNOWN;
int yuv_ss_mode = Y4M_UNKNOWN;
y4m_ratio_t yuv_frame_rate;
y4m_ratio_t yuv_aspect;
// need something for chroma subsampling type.
int write_error_code;
int header_written = 0;
int convert = 0;
int stream = 0;
enum PixelFormat convert_mode;
const static char *legal_flags = "chI:F:A:S:o:s:f:";
int y;
int frame_data_size ;
uint8_t *yuv_data[3] ;
y4m_stream_info_t streaminfo;
y4m_frame_info_t frameinfo;
y4m_init_stream_info(&streaminfo);
y4m_init_frame_info(&frameinfo);
yuv_frame_rate.d = 0;
yuv_aspect.d = 0;
// Register all formats and codecs
av_register_all();
while ((i = getopt (argc, argv, legal_flags)) != -1) {
switch (i) {
case 'I':
switch (optarg[0]) {
case 'p': yuv_interlacing = Y4M_ILACE_NONE; break;
case 't': yuv_interlacing = Y4M_ILACE_TOP_FIRST; break;
case 'b': yuv_interlacing = Y4M_ILACE_BOTTOM_FIRST; break;
default:
mjpeg_error("Unknown value for interlace: '%c'", optarg[0]);
return -1;
break;
}
break;
case 'F':
if( Y4M_OK != y4m_parse_ratio(&yuv_frame_rate, optarg) )
mjpeg_error_exit1 ("Syntax for frame rate should be Numerator:Denominator");
break;
case 'A':
if( Y4M_OK != y4m_parse_ratio(&yuv_aspect, optarg) ) {
if (!strcmp(optarg,PAL)) {
y4m_parse_ratio(&yuv_aspect, "128:117");
} else if (!strcmp(optarg,PAL_WIDE)) {
y4m_parse_ratio(&yuv_aspect, "640:351");
} else if (!strcmp(optarg,NTSC)) {
y4m_parse_ratio(&yuv_aspect, "4320:4739");
} else if (!strcmp(optarg,NTSC_WIDE)) {
y4m_parse_ratio(&yuv_aspect, "5760:4739");
} else {
mjpeg_error_exit1 ("Syntax for aspect ratio should be Numerator:Denominator");
}
}
break;
case 'S':
yuv_ss_mode = y4m_chroma_parse_keyword(optarg);
if (yuv_ss_mode == Y4M_UNKNOWN) {
mjpeg_error("Unknown subsampling mode option: %s", optarg);
mjpeg_error("Try: 420mpeg2 444 422 411");
return -1;
}
break;
case 'o':
fdOut = open (optarg,O_CREAT|O_WRONLY,0644);
if (fdOut == -1) {
mjpeg_error_exit1 ("Cannot open file for writing");
}
break;
case 'c':
convert = 1;
break;
case 's':
stream = atoi(optarg);
break;
case 'f':
avif = av_find_input_format (optarg);
break;
case 'h':
case '?':
print_usage (argv);
return 0 ;
break;
}
}
//fprintf (stderr,"optind: %d\n",optind);
optind--;
argc -= optind;
argv += optind;
if (argc == 1) {
print_usage (argv);
return 0 ;
}
// Open video file
if(av_open_input_file(&pFormatCtx, argv[1], avif, 0, NULL)!=0)
return -1; // Couldn't open file
// Retrieve stream information
if(av_find_stream_info(pFormatCtx)<0)
return -1; // Couldn't find stream information
// Dump information about file onto standard error
dump_format(pFormatCtx, 0, argv[1], 0);
// Find the first video stream
videoStream=-1;
for(i=0; i<pFormatCtx->nb_streams; i++)
if(pFormatCtx->streams[i]->codec->codec_type==CODEC_TYPE_VIDEO)
{
// mark debug
//fprintf (stderr,"Video Codec ID: %d (%s)\n",pFormatCtx->streams[i]->codec->codec_id ,pFormatCtx->streams[i]->codec->codec_name);
if (videoStream == -1 && stream == 0) {
// May still be overridden by the -s option
videoStream=i;
}
if (stream == i) {
videoStream=i;
break;
}
}
if(videoStream==-1)
return -1; // Didn't find a video stream
// Get a pointer to the codec context for the video stream
pCodecCtx=pFormatCtx->streams[videoStream]->codec;
// Find the decoder for the video stream
pCodec=avcodec_find_decoder(pCodecCtx->codec_id);
if(pCodec==NULL)
return -1; // Codec not found
// Open codec
if(avcodec_open(pCodecCtx, pCodec)<0)
return -1; // Could not open codec
// Read framerate, aspect ratio and chroma subsampling from Codec
if (yuv_frame_rate.d == 0) {
yuv_frame_rate.n = pFormatCtx->streams[videoStream]->r_frame_rate.num;
yuv_frame_rate.d = pFormatCtx->streams[videoStream]->r_frame_rate.den;
}
if (yuv_aspect.d == 0) {
yuv_aspect.n = pCodecCtx-> sample_aspect_ratio.num;
yuv_aspect.d = pCodecCtx-> sample_aspect_ratio.den;
}
// 0:0 is an invalid aspect ratio default to 1:1
if (yuv_aspect.d == 0 || yuv_aspect.n == 0 ) {
yuv_aspect.n=1;
yuv_aspect.d=1;
}
if (convert) {
if (yuv_ss_mode == Y4M_UNKNOWN) {
print_usage();
return 0;
} else {
y4m_accept_extensions(1);
switch (yuv_ss_mode) {
case Y4M_CHROMA_420MPEG2: convert_mode = PIX_FMT_YUV420P; break;
case Y4M_CHROMA_422: convert_mode = PIX_FMT_YUV422P; break;
case Y4M_CHROMA_444: convert_mode = PIX_FMT_YUV444P; break;
case Y4M_CHROMA_411: convert_mode = PIX_FMT_YUV411P; break;
case Y4M_CHROMA_420JPEG: convert_mode = PIX_FMT_YUVJ420P; break;
default:
mjpeg_error_exit1("Cannot convert to this chroma mode");
break;
}
}
} else if (yuv_ss_mode == Y4M_UNKNOWN) {
switch (pCodecCtx->pix_fmt) {
case PIX_FMT_YUV420P: yuv_ss_mode=Y4M_CHROMA_420MPEG2; break;
case PIX_FMT_YUV422P: yuv_ss_mode=Y4M_CHROMA_422; break;
case PIX_FMT_YUV444P: yuv_ss_mode=Y4M_CHROMA_444; break;
case PIX_FMT_YUV411P: yuv_ss_mode=Y4M_CHROMA_411; break;
case PIX_FMT_YUVJ420P: yuv_ss_mode=Y4M_CHROMA_420JPEG; break;
default:
yuv_ss_mode=Y4M_CHROMA_444;
convert_mode = PIX_FMT_YUV444P;
// is there a warning function
mjpeg_error("Unsupported Chroma mode. Upsampling to YUV444\n");
// enable advanced yuv stream
y4m_accept_extensions(1);
convert = 1;
break;
}
}
// Allocate video frame
pFrame=avcodec_alloc_frame();
// Output YUV format details
// is there some mjpeg_info functions?
fprintf (stderr,"YUV Aspect Ratio: %d:%d\n",yuv_aspect.n,yuv_aspect.d);
fprintf (stderr,"YUV frame rate: %d:%d\n",yuv_frame_rate.n,yuv_frame_rate.d);
fprintf (stderr,"YUV Chroma Subsampling: %d\n",yuv_ss_mode);
// Set the YUV stream details
// Interlace is handled when the first frame is read.
y4m_si_set_sampleaspect(&streaminfo, yuv_aspect);
y4m_si_set_framerate(&streaminfo, yuv_frame_rate);
y4m_si_set_chroma(&streaminfo, yuv_ss_mode);
// Loop until nothing read
while(av_read_frame(pFormatCtx, &packet)>=0)
{
// Is this a packet from the video stream?
if(packet.stream_index==videoStream)
{
// Decode video frame
avcodec_decode_video(pCodecCtx, pFrame, &frameFinished,
packet.data, packet.size);
// Did we get a video frame?
if(frameFinished)
{
// Save the frame to disk
// As we don't know interlacing until the first frame
// we wait until the first frame is read before setting the interlace flag
// and outputting the YUV header
// It also appears that some codecs don't set width or height until the first frame either
if (!header_written) {
if (yuv_interlacing == Y4M_UNKNOWN) {
if (pFrame->interlaced_frame) {
if (pFrame->top_field_first) {
yuv_interlacing = Y4M_ILACE_TOP_FIRST;
} else {
yuv_interlacing = Y4M_ILACE_BOTTOM_FIRST;
}
} else {
yuv_interlacing = Y4M_ILACE_NONE;
}
}
if (convert) {
// initialise conversion to different chroma subsampling
pFrame444=avcodec_alloc_frame();
numBytes=avpicture_get_size(convert_mode, pCodecCtx->width, pCodecCtx->height);
buffer=(uint8_t *)malloc(numBytes);
avpicture_fill((AVPicture *)pFrame444, buffer, convert_mode, pCodecCtx->width, pCodecCtx->height);
}
y4m_si_set_interlace(&streaminfo, yuv_interlacing);
y4m_si_set_width(&streaminfo, pCodecCtx->width);
y4m_si_set_height(&streaminfo, pCodecCtx->height);
chromalloc(yuv_data,&streaminfo);
fprintf (stderr,"YUV interlace: %d\n",yuv_interlacing);
fprintf (stderr,"YUV Output Resolution: %dx%d\n",pCodecCtx->width, pCodecCtx->height);
if ((write_error_code = y4m_write_stream_header(fdOut, &streaminfo)) != Y4M_OK)
{
mjpeg_error("Write header failed: %s", y4m_strerr(write_error_code));
}
header_written = 1;
}
if (convert) {
// convert to 444
/*
+#ifdef HAVE_LIBSWSCALE
+ struct SwsContext* img_convert_ctx =
+ sws_getContext(context->width, context->height, PIX_FMT_RGB24,
+ context->width, context->height, context->pix_fmt,
+ SWS_BICUBIC, NULL, NULL, NULL);
+
+ sws_scale(img_convert_ctx, pict->data, pict->linesize,
+ 0, context->height, encodable->data,
+ encodable->linesize);
+
+ sws_freeContext (img_convert_ctx);
+#else
img_convert((AVPicture *)encodable, context->pix_fmt, (AVPicture *)pict, PIX_FMT_RGB24, context->width, context->height);
-
+ (AVPicture *)pict, PIX_FMT_RGB24,
+ context->width, context->height);
+#endif
*/
struct SwsContext* img_convert_ctx =
sws_getContext(pCodecCtx->width, pCodecCtx->height, pCodecCtx->pix_fmt,
pCodecCtx->width, pCodecCtx->height, pCodecCtx->pix_fmt,
SWS_BICUBIC, NULL, NULL, NULL);
sws_scale(img_convert_ctx, pFrame->data, pFrame->linesize,
0, pCodecCtx->height, pFrame444->data,
pFrame444->linesize);
sws_freeContext (img_convert_ctx);
//img_convert((AVPicture *)pFrame444, convert_mode, (AVPicture*)pFrame, pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height);
chromacpy(yuv_data,pFrame444,&streaminfo);
} else {
chromacpy(yuv_data,pFrame,&streaminfo);
}
write_error_code = y4m_write_frame( fdOut, &streaminfo, &frameinfo, yuv_data);
}
}
// Free the packet that was allocated by av_read_frame
av_free_packet(&packet);
}
y4m_fini_stream_info(&streaminfo);
y4m_fini_frame_info(&frameinfo);
free(yuv_data[0]);
free(yuv_data[1]);
free(yuv_data[2]);
// Free the YUV frame
av_free(pFrame);
// Close the codec
avcodec_close(pCodecCtx);
// Close the video file
av_close_input_file(pFormatCtx);
return 0;
}
// *************************************************************************************
// MAIN
// *************************************************************************************
int main (int argc, char *argv[])
{
int verbose = 4; // LOG_ERROR ;
int fdIn = 0 ;
int fdOut = 1 ;
y4m_stream_info_t in_streaminfo,out_streaminfo;
const static char *legal_flags = "d:m:V:";
int c, *matrix,matlen;
float divisor=0;
while ((c = getopt (argc, argv, legal_flags)) != -1) {
switch (c) {
case 'V':
verbose = atoi (optarg);
if (verbose < 0 || verbose > 2)
mjpeg_error_exit1 ("Verbose level must be [0..2]");
break;
case 'd':
divisor = atof(optarg);
if (divisor == 0) {
mjpeg_error_exit1 ("Divisor must not be 0");
}
break;
case 'm':
// strlen should be longer than the
matrix = (int *) malloc (sizeof(int) * strlen(optarg));
matlen = parse_matrix(optarg,matrix);
if (matlen == 0) {
mjpeg_error_exit1 ("Invalid matrix");
}
break;
case '?':
print_usage (argv);
return 0 ;
break;
}
}
if (divisor == 0) {
divisor = sum_matrix(matrix,matlen);
}
if (divisor == 0) {
mjpeg_warn("divisor defaulting to 1\n");
divisor = 1;
}
// mjpeg tools global initialisations
mjpeg_default_handler_verbosity (verbose);
// Initialize input streams
y4m_init_stream_info (&in_streaminfo);
y4m_init_stream_info (&out_streaminfo);
// ***************************************************************
// Get video stream informations (size, framerate, interlacing, aspect ratio).
// The streaminfo structure is filled in
// ***************************************************************
// INPUT comes from stdin, we check for a correct file header
if (y4m_read_stream_header (fdIn, &in_streaminfo) != Y4M_OK)
mjpeg_error_exit1 ("Could'nt read YUV4MPEG header!");
y4m_ratio_t src_frame_rate = y4m_si_get_framerate( &in_streaminfo );
y4m_copy_stream_info( &out_streaminfo, &in_streaminfo );
// Information output
mjpeg_info ("yuvconvolve (version " YUVRFPS_VERSION ") performs a convolution matrix on yuv streams");
mjpeg_info ("yuvconvolve -? for help");
y4m_write_stream_header(fdOut,&out_streaminfo);
/* in that function we do all the important work */
fprintf (stderr,"matrix square: %d\n",matlen);
convolve( fdIn,&in_streaminfo,fdOut,&out_streaminfo,matrix,divisor,matlen);
y4m_fini_stream_info (&in_streaminfo);
y4m_fini_stream_info (&out_streaminfo);
return 0;
}
// *************************************************************************************
// MAIN
// *************************************************************************************
int main (int argc, char *argv[])
{
int verbose = 1 ; // LOG_ERROR ?
int drop_frames = 0;
int fdIn = 0 ;
int fdOut = 1 ;
y4m_stream_info_t in_streaminfo,out_streaminfo;
int src_interlacing = Y4M_UNKNOWN;
y4m_ratio_t src_frame_rate;
const static char *legal_flags = "v:m:s:n";
int max_shift = 0, search = 0;
int noshift=0;
int c;
while ((c = getopt (argc, argv, legal_flags)) != -1) {
switch (c) {
case 'v':
verbose = atoi (optarg);
if (verbose < 0 || verbose > 2)
mjpeg_error_exit1 ("Verbose level must be [0..2]");
break;
case 'm':
max_shift = atof(optarg);
break;
case 's':
search = atof(optarg);
break;
case 'n':
noshift=1;
break;
case '?':
print_usage (argv);
return 0 ;
break;
}
}
// mjpeg tools global initialisations
mjpeg_default_handler_verbosity (verbose);
// Initialize input streams
y4m_init_stream_info (&in_streaminfo);
y4m_init_stream_info (&out_streaminfo);
// ***************************************************************
// Get video stream informations (size, framerate, interlacing, aspect ratio).
// The streaminfo structure is filled in
// ***************************************************************
// INPUT comes from stdin, we check for a correct file header
if (y4m_read_stream_header (fdIn, &in_streaminfo) != Y4M_OK)
mjpeg_error_exit1 ("Could'nt read YUV4MPEG header!");
src_frame_rate = y4m_si_get_framerate( &in_streaminfo );
y4m_copy_stream_info( &out_streaminfo, &in_streaminfo );
// Information output
/* in that function we do all the important work */
if (!noshift)
y4m_write_stream_header(fdOut,&out_streaminfo);
process( fdIn,&in_streaminfo,fdOut,&out_streaminfo,max_shift,search,noshift);
y4m_fini_stream_info (&in_streaminfo);
y4m_fini_stream_info (&out_streaminfo);
return 0;
}
int
main(int argc, char **argv)
{
int sts, c, width = 640, height = 480, noheader = 0;
int Y = 16, U = 128, V = 128, chroma_mode = Y4M_CHROMA_420MPEG2;
int numframes = 1, force = 0;
y4m_ratio_t rate_ratio = y4m_fps_NTSC;
y4m_ratio_t aspect_ratio = y4m_sar_SQUARE;
int plane_length[3];
u_char *yuv[3];
y4m_stream_info_t ostream;
y4m_frame_info_t oframe;
char interlace = Y4M_ILACE_NONE;
opterr = 0;
y4m_accept_extensions(1);
while ((c = getopt(argc, argv, "Hfx:w:h:r:i:a:Y:U:V:n:")) != EOF)
{
switch (c)
{
case 'H':
noheader = 1;
break;
case 'a':
sts = y4m_parse_ratio(&aspect_ratio, optarg);
if (sts != Y4M_OK)
mjpeg_error_exit1("Invalid aspect: %s",
optarg);
break;
case 'w':
width = atoi(optarg);
break;
case 'h':
height = atoi(optarg);
break;
case 'r':
sts = y4m_parse_ratio(&rate_ratio, optarg);
if (sts != Y4M_OK)
mjpeg_error_exit1("Invalid rate: %s", optarg);
break;
case 'Y':
Y = atoi(optarg);
break;
case 'U':
U = atoi(optarg);
break;
case 'V':
V = atoi(optarg);
break;
case 'i':
switch (optarg[0])
{
case 'p':
interlace = Y4M_ILACE_NONE;
break;
case 't':
interlace = Y4M_ILACE_TOP_FIRST;
break;
case 'b':
interlace = Y4M_ILACE_BOTTOM_FIRST;
break;
default:
usage();
}
break;
case 'x':
chroma_mode = y4m_chroma_parse_keyword(optarg);
if (chroma_mode == Y4M_UNKNOWN)
{
if (strcmp(optarg, "help") != 0)
mjpeg_error("Invalid -x arg '%s'", optarg);
chroma_usage();
}
break;
case 'f':
force = 1;
break;
case 'n':
numframes = atoi(optarg);
break;
case '?':
default:
usage();
}
}
if (width <= 0)
mjpeg_error_exit1("Invalid Width: %d", width);
if (height <= 0)
mjpeg_error_exit1("Invalid Height: %d", height);
if (!force && (Y < 16 || Y > 235))
mjpeg_error_exit1("16 < Y < 235");
if (!force && (U < 16 || U > 240))
mjpeg_error_exit1("16 < U < 240");
if (!force && (V < 16 || V > 240))
mjpeg_error_exit1("16 < V < 240");
y4m_init_stream_info(&ostream);
y4m_init_frame_info(&oframe);
y4m_si_set_width(&ostream, width);
y4m_si_set_height(&ostream, height);
y4m_si_set_interlace(&ostream, interlace);
y4m_si_set_framerate(&ostream, rate_ratio);
y4m_si_set_sampleaspect(&ostream, aspect_ratio);
y4m_si_set_chroma(&ostream, chroma_mode);
if (y4m_si_get_plane_count(&ostream) != 3)
mjpeg_error_exit1("Only the 3 plane formats supported");
plane_length[0] = y4m_si_get_plane_length(&ostream, 0);
plane_length[1] = y4m_si_get_plane_length(&ostream, 1);
plane_length[2] = y4m_si_get_plane_length(&ostream, 2);
yuv[0] = malloc(plane_length[0]);
yuv[1] = malloc(plane_length[1]);
yuv[2] = malloc(plane_length[2]);
/*
* Now fill the array once with black but use the provided Y, U and V values
*/
memset(yuv[0], Y, plane_length[0]);
memset(yuv[1], U, plane_length[1]);
memset(yuv[2], V, plane_length[2]);
if (noheader == 0)
y4m_write_stream_header(fileno(stdout), &ostream);
while (numframes--)
y4m_write_frame(fileno(stdout), &ostream, &oframe, yuv);
free(yuv[0]);
free(yuv[1]);
free(yuv[2]);
y4m_fini_stream_info(&ostream);
y4m_fini_frame_info(&oframe);
exit(0);
}
int main(int argc, char **argv)
{
int c, err, ilace;
int fd_in = fileno(stdin), fd_out = fileno(stdout);
y4m_ratio_t rate;
y4m_stream_info_t si, so;
y4m_frame_info_t fi;
uint8_t *top1[3], *bot1[3], *top2[3], *bot2[3];
opterr = 0;
while ((c = getopt(argc, argv, "h")) != EOF)
{
switch (c)
{
case 'h':
case '?':
default:
usage();
}
}
y4m_accept_extensions(1);
y4m_init_stream_info(&si);
y4m_init_stream_info(&so);
y4m_init_frame_info(&fi);
err = y4m_read_stream_header(fd_in, &si);
if (err != Y4M_OK)
mjpeg_error_exit1("Input stream error: %s\n", y4m_strerr(err));
if (y4m_si_get_plane_count(&si) != 3)
mjpeg_error_exit1("only 3 plane formats supported");
rate = y4m_si_get_framerate(&si);
if (!Y4M_RATIO_EQL(rate, y4m_fps_NTSC))
mjpeg_error_exit1("input stream not NTSC 30000:1001");
ilace = y4m_si_get_interlace(&si);
if (ilace != Y4M_ILACE_BOTTOM_FIRST && ilace != Y4M_ILACE_TOP_FIRST)
mjpeg_error_exit1("input stream not interlaced");
top1[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
top1[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
top1[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);
bot1[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
bot1[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
bot1[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);
top2[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
top2[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
top2[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);
bot2[0] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,0) / 2);
bot2[1] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,1) / 2);
bot2[2] = (uint8_t *) malloc(y4m_si_get_plane_length(&si,2) / 2);
y4m_copy_stream_info(&so, &si);
y4m_si_set_framerate(&so, y4m_fps_NTSC_FILM);
y4m_si_set_interlace(&so, Y4M_ILACE_NONE);
/*
* At this point the input stream has been verified to be interlaced NTSC,
* the output stream rate set to NTSC_FILM, interlacing tag changed to
* progressive, and the field buffers allocated.
*
* Time to write the output stream header and commence processing input.
*/
y4m_write_stream_header(fd_out, &so);
while (1)
{
err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
if (err != Y4M_OK)
goto done;
y4m_write_fields(fd_out, &so, &fi, top1, bot1); /* A */
err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
if (err != Y4M_OK)
goto done;
y4m_write_fields(fd_out, &so, &fi, top1, bot1); /* B */
err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
if (err != Y4M_OK)
goto done;
err = y4m_read_fields(fd_in, &si, &fi, top2, bot2);
if (err != Y4M_OK)
{
/*
* End of input when reading the 2nd "mixed field" frame (C+D). The previous
* frame was the first "mixed field" frame (B+C). Rather than emit a mixed
* interlaced frame duplicate a field and output the previous frame.
*/
if (ilace == Y4M_ILACE_BOTTOM_FIRST)
y4m_write_fields(fd_out, &so, &fi, bot1,bot1);
else
y4m_write_fields(fd_out, &so, &fi, top1,top1);
goto done;
}
/*
* Now the key part of the processing - effectively discarding the first mixed
* frame with fields from frames B + C and creating the C frame from the two
* mixed frames. For a BOTTOM FIELD FIRST stream use the 'top' field from
* frame 3 and the 'bottom' fields from frame 4. With a TOP FIELD FIRST stream
* it's the other way around - use the 'bottom' field from frame 3 and the
* 'top' field from frame 4.
*/
if (ilace == Y4M_ILACE_BOTTOM_FIRST)
y4m_write_fields(fd_out, &so, &fi, top1, bot2); /* C */
else
y4m_write_fields(fd_out, &so, &fi, top2, bot1); /* C */
err = y4m_read_fields(fd_in, &si, &fi, top1, bot1);
y4m_write_fields(fd_out, &so, &fi, top1, bot1); /* D */
}
done: y4m_fini_frame_info(&fi);
y4m_fini_stream_info(&si);
y4m_fini_stream_info(&so);
exit(0);
}
void writeoutYUV4MPEGheader(int out_fd,
LavParam *param,
EditList el,
y4m_stream_info_t *streaminfo)
{
int n;
y4m_si_set_width(streaminfo, param->output_width);
y4m_si_set_height(streaminfo, param->output_height);
y4m_si_set_interlace(streaminfo, param->interlace);
y4m_si_set_framerate(streaminfo, mpeg_conform_framerate(el.video_fps));
if (!Y4M_RATIO_EQL(param->sar, y4m_sar_UNKNOWN)) {
y4m_si_set_sampleaspect(streaminfo, param->sar);
} else if ((el.video_sar_width != 0) || (el.video_sar_height != 0)) {
y4m_ratio_t sar;
sar.n = el.video_sar_width;
sar.d = el.video_sar_height;
y4m_si_set_sampleaspect(streaminfo, sar);
} else {
/* no idea! ...eh, just guess. */
mjpeg_warn("unspecified sample-aspect-ratio --- taking a guess...");
y4m_si_set_sampleaspect(streaminfo,
y4m_guess_sar(param->output_width,
param->output_height,
param->dar));
}
switch (el_video_frame_data_format(0, &el)) { /* FIXME: checking only 0-th frame. */
case DATAFORMAT_YUV420:
switch (param->chroma) {
case Y4M_UNKNOWN:
case Y4M_CHROMA_420JPEG:
break;
case Y4M_CHROMA_420MPEG2:
case Y4M_CHROMA_420PALDV:
mjpeg_warn("4:2:0 chroma should be '420jpeg' with this input");
break;
default:
mjpeg_error_exit1("must specify 4:2:0 chroma (should be '420jpeg') with this input");
break;
}
break;
case DATAFORMAT_YUV422:
switch (param->chroma) {
case Y4M_CHROMA_422:
break;
default:
mjpeg_error_exit1("must specify chroma '422' with this input");
break;
}
break;
case DATAFORMAT_DV2:
#ifndef HAVE_LIBDV
mjpeg_error_exit1("DV input was not configured at compile time");
#else
el_get_video_frame(jpeg_data, 0, &el); /* FIXME: checking only 0-th frame. */
dv_parse_header(decoder, jpeg_data);
switch(decoder->sampling) {
case e_dv_sample_420:
switch (param->chroma) {
case Y4M_UNKNOWN:
mjpeg_info("set chroma '420paldv' from input");
param->chroma = Y4M_CHROMA_420PALDV;
break;
case Y4M_CHROMA_420PALDV:
break;
case Y4M_CHROMA_420JPEG:
case Y4M_CHROMA_420MPEG2:
mjpeg_warn("4:2:0 chroma should be '420paldv' with this input");
break;
case Y4M_CHROMA_422:
if(libdv_pal_yv12 == 1 )
mjpeg_error_exit1("must specify 4:2:0 chroma (should be '420paldv') with this input");
break;
default:
mjpeg_error_exit1("must specify 4:2:0 chroma (should be '420paldv') with this input");
break;
}
break;
case e_dv_sample_411:
if (param->chroma != Y4M_CHROMA_411)
mjpeg_info("chroma '411' recommended with this input");
switch (param->chroma) {
case Y4M_CHROMA_420MPEG2:
case Y4M_CHROMA_420PALDV:
mjpeg_warn("4:2:0 chroma should be '420jpeg' with this input");
break;
}
break;
case e_dv_sample_422:
if (param->chroma != Y4M_CHROMA_422)
mjpeg_info("chroma '422' recommended with this input");
switch (param->chroma) {
case Y4M_CHROMA_420MPEG2:
case Y4M_CHROMA_420PALDV:
mjpeg_warn("4:2:0 chroma should be '420jpeg' with this input");
break;
}
break;
default:
break;
}
#endif
break;
case DATAFORMAT_MJPG:
if (param->chroma != Y4M_CHROMA_422 && el.chroma == Y4M_CHROMA_422)
mjpeg_info("chroma '422' recommended with this input");
switch (param->chroma) {
case Y4M_CHROMA_420MPEG2:
case Y4M_CHROMA_420PALDV:
mjpeg_warn("4:2:0 chroma should be '420jpeg' with this input");
break;
}
break;
}
if (param->chroma == Y4M_UNKNOWN) {
mjpeg_info("set default chroma '420jpeg'");
param->chroma = Y4M_CHROMA_420JPEG;
}
y4m_si_set_chroma(streaminfo, param->chroma);
n = y4m_write_stream_header(out_fd, streaminfo);
if (n != Y4M_OK)
mjpeg_error("Failed to write stream header: %s", y4m_strerr(n));
}
static int generate_YUV4MPEG(parameters_t *param)
{
uint32_t frame;
//size_t pngsize;
char pngname[FILENAME_MAX];
uint8_t *yuv[3]; /* buffer for Y/U/V planes of decoded PNG */
y4m_stream_info_t streaminfo;
y4m_frame_info_t frameinfo;
if ((param->width % 2) == 0)
param->new_width = param->width;
else
{
param->new_width = ((param->width >> 1) + 1) << 1;
printf("Setting new, even image width %d", param->new_width);
}
mjpeg_info("Now generating YUV4MPEG stream.");
y4m_init_stream_info(&streaminfo);
y4m_init_frame_info(&frameinfo);
y4m_si_set_width(&streaminfo, param->new_width);
y4m_si_set_height(&streaminfo, param->height);
y4m_si_set_interlace(&streaminfo, param->interlace);
y4m_si_set_framerate(&streaminfo, param->framerate);
y4m_si_set_chroma(&streaminfo, param->ss_mode);
yuv[0] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[0][0]));
yuv[1] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[1][0]));
yuv[2] = (uint8_t *)malloc(param->new_width * param->height * sizeof(yuv[2][0]));
y4m_write_stream_header(STDOUT_FILENO, &streaminfo);
for (frame = param->begin;
(frame < param->numframes + param->begin) || (param->numframes == -1);
frame++)
{
// if (frame < 25)
// else
//snprintf(pngname, sizeof(pngname), param->pngformatstr, frame - 25);
snprintf(pngname, sizeof(pngname), param->pngformatstr, frame);
raw0 = yuv[0];
raw1 = yuv[1];
raw2 = yuv[2];
if (decode_png(pngname, 1, param) == -1)
{
mjpeg_info("Read from '%s' failed: %s", pngname, strerror(errno));
if (param->numframes == -1)
{
mjpeg_info("No more frames. Stopping.");
break; /* we are done; leave 'while' loop */
}
else
{
mjpeg_info("Rewriting latest frame instead.");
}
}
else
{
#if 0
mjpeg_debug("Preparing frame");
/* Now open this PNG file, and examine its header to retrieve the
YUV4MPEG info that shall be written */
if ((param->interlace == Y4M_ILACE_NONE) || (param->interleave == 1))
{
mjpeg_info("Processing non-interlaced/interleaved %s.",
pngname, pngsize);
decode_png(imagedata, 0, 420, yuv[0], yuv[1], yuv[2],
param->width, param->height, param->new_width);
#if 0
if (param->make_z_alpha)
{
mjpeg_info("Writing Z/Alpha data.\n");
za_write(real_z_imagemap, param->width, param->height,z_alpha_fp,frame);
}
#endif
}
else
{
mjpeg_error_exit1("Can't handle interlaced PNG information (yet) since there is no standard for it.\n"
"Use interleaved mode (-L option) to create interlaced material.");
switch (param->interlace)
{
case Y4M_ILACE_TOP_FIRST:
mjpeg_info("Processing interlaced, top-first %s", pngname);
#if 0
decode_jpeg_raw(jpegdata, jpegsize,
Y4M_ILACE_TOP_FIRST,
420, param->width, param->height,
yuv[0], yuv[1], yuv[2]);
#endif
break;
case Y4M_ILACE_BOTTOM_FIRST:
mjpeg_info("Processing interlaced, bottom-first %s", pngname);
#if 0
decode_jpeg_raw(jpegdata, jpegsize,
Y4M_ILACE_BOTTOM_FIRST,
420, param->width, param->height,
yuv[0], yuv[1], yuv[2]);
#endif
break;
default:
mjpeg_error_exit1("FATAL logic error?!?");
break;
}
}
#endif
mjpeg_debug("Converting frame to YUV format.");
/* Transform colorspace, then subsample (in place) */
convert_RGB_to_YCbCr(yuv, param->height * param->new_width);
chroma_subsample(param->ss_mode, yuv, param->new_width, param->height);
mjpeg_debug("Frame decoded, now writing to output stream.");
}
mjpeg_debug("Frame decoded, now writing to output stream.");
y4m_write_frame(STDOUT_FILENO, &streaminfo, &frameinfo, yuv);
}
#if 0
if (param->make_z_alpha)
{
za_write_end(z_alpha_fp);
fclose(z_alpha_fp);
}
#endif
y4m_fini_stream_info(&streaminfo);
y4m_fini_frame_info(&frameinfo);
free(yuv[0]);
free(yuv[1]);
free(yuv[2]);
return 0;
}
int
main(int argc, char *argv[])
{
int i;
long long avg, total;
int input_fd = 0;
int output_fd = 1;
int horz;
int vert;
int c;
int frame_count;
y4m_stream_info_t istream, ostream;
y4m_frame_info_t iframe;
y4m_accept_extensions(1);
while((c = getopt(argc, argv, "r:R:t:T:v:S:hI:w:fc:")) != EOF) {
switch(c) {
case 'r':
radius_luma = atoi(optarg);
break;
case 'R':
radius_chroma = atoi(optarg);
break;
case 't':
threshold_luma = atoi(optarg);
break;
case 'T':
threshold_chroma = atoi(optarg);
break;
case 'I':
interlace = atoi (optarg);
if (interlace != 0 && interlace != 1)
{
Usage (argv[0]);
exit (1);
}
break;
case 'S':
param_skip = atoi (optarg);
break;
case 'f':
param_fast = 1;
break;
case 'w':
if (strcmp (optarg, "8") == 0)
param_weight_type = 1;
else if (strcmp (optarg, "2.667") == 0)
param_weight_type = 2;
else if (strcmp (optarg, "13.333") == 0)
param_weight_type = 3;
else if (strcmp (optarg, "24") == 0)
param_weight_type = 4;
else
param_weight_type = 0;
param_weight = atof (optarg);
break;
case 'c':
cutoff = atof(optarg);
break;
case 'v':
verbose = atoi (optarg);
if (verbose < 0 || verbose >2)
{
Usage (argv[0]);
exit (1);
}
break;
case 'h':
Usage (argv[0]);
default:
exit(0);
}
}
if( param_weight < 0 ) {
if( param_fast )
param_weight = 8.0;
else
param_weight = 1.0;
}
for( i=1; i<NUMAVG; i++ ) {
avg_replace[i]=0;
divisor[i]=((1<<DIVISORBITS)+(i>>1))/i;
divoffset[i]=divisor[i]*(i>>1)+(divisor[i]>>1);
}
#ifdef HAVE_ASM_MMX
if( cpu_accel() & ACCEL_X86_MMXEXT )
domean8=1;
#endif
mjpeg_info ("fast %d, weight type %d\n", param_fast,
param_weight_type);
if (radius_luma <= 0 || radius_chroma <= 0)
mjpeg_error_exit1("radius values must be > 0!");
if (threshold_luma < 0 || threshold_chroma < 0)
mjpeg_error_exit1("threshold values must be >= 0!");
(void)mjpeg_default_handler_verbosity(verbose);
y4m_init_stream_info(&istream);
y4m_init_stream_info(&ostream);
y4m_init_frame_info(&iframe);
i = y4m_read_stream_header(input_fd, &istream);
if (i != Y4M_OK)
mjpeg_error_exit1("Input stream error: %s", y4m_strerr(i));
if (y4m_si_get_plane_count(&istream) != 3)
mjpeg_error_exit1("Only 3 plane formats supported");
chroma_mode = y4m_si_get_chroma(&istream);
SS_H = y4m_chroma_ss_x_ratio(chroma_mode).d;
SS_V = y4m_chroma_ss_y_ratio(chroma_mode).d;
mjpeg_debug("chroma subsampling: %dH %dV\n",SS_H,SS_V);
if (interlace == -1)
{
i = y4m_si_get_interlace(&istream);
switch (i)
{
case Y4M_ILACE_NONE:
interlace = 0;
break;
case Y4M_ILACE_BOTTOM_FIRST:
case Y4M_ILACE_TOP_FIRST:
interlace = 1;
break;
default:
mjpeg_warn("Unknown interlacing '%d', assuming non-interlaced", i);
interlace = 0;
break;
}
}
if( interlace && y4m_si_get_height(&istream) % 2 != 0 )
mjpeg_error_exit1("Input images have odd number of lines - can't treats as interlaced!" );
horz = y4m_si_get_width(&istream);
vert = y4m_si_get_height(&istream);
mjpeg_debug("width=%d height=%d luma_r=%d chroma_r=%d luma_t=%d chroma_t=%d", horz, vert, radius_luma, radius_chroma, threshold_luma, threshold_chroma);
y4m_copy_stream_info(&ostream, &istream);
input_frame[0] = malloc(horz * vert);
input_frame[1] = malloc((horz / SS_H) * (vert / SS_V));
input_frame[2] = malloc((horz / SS_H) * (vert / SS_V));
output_frame[0] = malloc(horz * vert);
output_frame[1] = malloc((horz / SS_H) * (vert / SS_V));
output_frame[2] = malloc((horz / SS_H) * (vert / SS_V));
y4m_write_stream_header(output_fd, &ostream);
frame_count = 0;
while (y4m_read_frame(input_fd, &istream, &iframe, input_frame) == Y4M_OK)
{
frame_count++;
if (frame_count > param_skip)
{
filter(horz, vert, input_frame, output_frame);
y4m_write_frame(output_fd, &ostream, &iframe, output_frame);
}
else
y4m_write_frame(output_fd, &ostream, &iframe, input_frame);
}
for (total=0, avg=0, i=0; i < NUMAVG; i++) {
total += avg_replace[i];
avg += avg_replace[i] * i;
}
mjpeg_info("frames=%d avg=%3.1f", frame_count, ((double)avg)/((double)total));
for (i=0; i < NUMAVG; i++) {
mjpeg_debug( "%02d: %6.2f", i,
(((double)avg_replace[i]) * 100.0)/(double)(total));
}
y4m_fini_stream_info(&istream);
y4m_fini_stream_info(&ostream);
y4m_fini_frame_info(&iframe);
exit(0);
}
int main (int argc, char *argv[])
{
int verbose = 1;
int in_fd = 0; /* stdin */
int out_fd = 1; /* stdout */
unsigned char *yuv0[3]; /* input 0 */
unsigned char *yuv1[3]; /* input 1 */
unsigned char *yuv[3]; /* output */
int w, h, len, lensr2;
int i, j, opacity, opacity_range, frame, numframes, r = 0;
unsigned int param_opacity0 = 0; /* opacity of input1 at the beginning */
unsigned int param_opacity1 = 255; /* opacity of input1 at the end */
unsigned int param_duration = 0; /* duration of transistion effect */
unsigned int param_skipframes = 0; /* # of frames to skip */
unsigned int param_numframes = 0; /* # of frames to (process - skip+num) * framerepeat <= duration */
unsigned int param_framerep = 1; /* # of repititions per frame */
y4m_stream_info_t streaminfo;
y4m_frame_info_t frameinfo;
y4m_init_stream_info (&streaminfo);
y4m_init_frame_info (&frameinfo);
while ((i = getopt(argc, argv, "v:o:O:d:s:n:r:")) != -1) {
switch (i) {
case 'v':
verbose = atoi (optarg);
if( verbose < 0 || verbose >2 )
{
usage ();
exit (1);
}
break;
case 'o':
param_opacity0 = atoi (optarg);
if (param_opacity0 > 255) {
mjpeg_warn( "start opacity > 255");
param_opacity0 = 255;
}
break;
case 'O':
param_opacity1 = atoi (optarg);
if (param_opacity1 > 255) {
mjpeg_warn( "end opacity > 255");
param_opacity1 = 255;
}
break;
case 'd':
param_duration = atoi (optarg);
if (param_duration == 0) {
mjpeg_error_exit1( "error: duration = 0 frames");
}
break;
case 's':
param_skipframes = atoi (optarg);
break;
case 'n':
param_numframes = atoi (optarg);
break;
case 'r':
param_framerep = atoi (optarg);
break;
}
}
if (param_numframes == 0)
param_numframes = (param_duration - param_skipframes) / param_framerep;
if (param_duration == 0) {
usage ();
exit (1);
}
numframes = (param_skipframes + param_numframes) * param_framerep;
if (numframes > param_duration) {
mjpeg_error_exit1( "skip + num > duration");
}
(void)mjpeg_default_handler_verbosity(verbose);
i = y4m_read_stream_header (in_fd, &streaminfo);
if (i != Y4M_OK) {
fprintf (stderr, "%s: input stream error - %s\n",
argv[0], y4m_strerr(i));
exit (1);
}
w = y4m_si_get_width(&streaminfo);
h = y4m_si_get_height(&streaminfo);
len = w*h;
lensr2 = len >> 2;
yuv[0] = malloc (len);
yuv0[0] = malloc (len);
yuv1[0] = malloc (len);
yuv[1] = malloc (lensr2);
yuv0[1] = malloc (lensr2);
yuv1[1] = malloc (lensr2);
yuv[2] = malloc (lensr2);
yuv0[2] = malloc (lensr2);
yuv1[2] = malloc (lensr2);
y4m_write_stream_header (out_fd, &streaminfo);
frame = param_skipframes;
param_duration--;
opacity_range = param_opacity1 - param_opacity0;
while (1) {
if (!r) {
r = param_framerep;
i = y4m_read_frame(in_fd, &streaminfo, &frameinfo, yuv0);
if (i != Y4M_OK)
exit (frame < numframes);
j = y4m_read_frame(in_fd, &streaminfo, &frameinfo, yuv1);
if (j != Y4M_OK)
exit (frame < numframes);
}
r--;
opacity = param_opacity0 + ((frame * opacity_range) / param_duration);
blend (yuv0, yuv1, opacity, len, yuv);
y4m_write_frame (out_fd, &streaminfo, &frameinfo, yuv);
if (++frame == numframes)
exit (0);
}
}
/** MAIN */
int main( int argc, char **argv)
{
int i, frame_count;
int horz, vert; /* width and height of the frame */
uint8_t *frame[3]; /*pointer to the 3 color planes of the input frame */
struct area_s inarea;
struct color_yuv coloryuv;
int input_fd = 0; /* std in */
int output_fd = 1; /* std out */
int darker = 0; /* how much darker should the image be */
int copy_pixel = 0; /* how much pixels we should use for filling up the area */
int average_pixel = 0; /* how much pixel to use for average */
y4m_stream_info_t istream, ostream;
y4m_frame_info_t iframe;
inarea.width=0; inarea.height=0; inarea.voffset=0; inarea.hoffset=0;
coloryuv.luma = LUMA; /*Setting the luma to black */
coloryuv.chroma_b = CHROMA; /*Setting the chroma to center, means white */
coloryuv.chroma_r = CHROMA; /*Setting the chroma to center, means white */
(void)mjpeg_default_handler_verbosity(verbose);
/* processing commandline */
process_commandline(argc, argv, &inarea, &darker, ©_pixel, &coloryuv,
&average_pixel);
y4m_init_stream_info(&istream);
y4m_init_stream_info(&ostream);
y4m_init_frame_info(&iframe);
/* First read the header of the y4m stream */
i = y4m_read_stream_header(input_fd, &istream);
if ( i != Y4M_OK) /* a basic check if we really have y4m stream */
mjpeg_error_exit1("Input stream error: %s", y4m_strerr(i));
else
{
/* Here we copy the input stream info to the output stream info header */
y4m_copy_stream_info(&ostream, &istream);
/* Here we write the new output header to the output fd */
y4m_write_stream_header(output_fd, &ostream);
horz = y4m_si_get_width(&istream); /* get the width of the frame */
vert = y4m_si_get_height(&istream); /* get the height of the frame */
if ( (inarea.width + inarea.hoffset) > horz)
mjpeg_error_exit1("Input width and offset larger than framewidth,exit");
if ( (inarea.height + inarea.voffset) > vert)
mjpeg_error_exit1("Input height and offset larger than frameheight,exit");
/* Here we allocate the memory for on frame */
frame[0] = malloc( horz * vert );
frame[1] = malloc( (horz/2) * (vert/2) );
frame[2] = malloc( (horz/2) * (vert/2) );
/* Here we set the initial number of of frames */
/* We do not need it. Just for showing that is does something */
frame_count = 0 ;
/* This is the main loop here can filters effects, scaling and so
on be done with the video frames. Just up to your mind */
/* We read now a single frame with the header and check if it does not
have any problems or we have alreaddy processed the last without data */
while(y4m_read_frame(input_fd, &istream, &iframe, frame) == Y4M_OK)
{
frame_count++;
/* You can do something usefull here */
if (darker != 0)
set_darker(inarea, horz, vert, frame, darker);
else if (copy_pixel != 0)
copy_area(inarea, horz, vert, frame, copy_pixel);
else if (average_pixel != 0)
average_area(inarea, horz, vert, frame, average_pixel);
else
set_inactive(inarea, horz, vert, frame, &coloryuv);
/* Now we put out the read frame */
y4m_write_frame(output_fd, &ostream, &iframe, frame);
}
/* Cleaning up the data structures */
y4m_fini_stream_info(&istream);
y4m_fini_stream_info(&ostream);
y4m_fini_frame_info(&iframe);
}
/* giving back the memory to the system */
free(frame[0]);
frame[0] = 0;
free(frame[1]);
frame[1] = 0;
free(frame[2]);
frame[2] = 0;
exit(0); /* exiting */
}
