zOPER_EXPORT void OPERATION
TraceRect( zCPCHAR cpcMessage,
RECT& rect )
{
zCHAR szBuffer[ 256 ];
zSHORT nLth;
nLth = zstrlen( cpcMessage );
if ( nLth < sizeof( szBuffer ) - 32 )
zstrcpy( szBuffer, cpcMessage );
else
nLth = 0;
zstrcpy( szBuffer + nLth, " X:" );
zltoa( rect.left, szBuffer + nLth + 3 );
nLth = zstrlen( szBuffer );
zstrcpy( szBuffer + nLth, " Y:" );
zltoa( rect.top, szBuffer + nLth + 3 );
nLth = zstrlen( szBuffer );
zstrcpy( szBuffer + nLth, " W:" );
zltoa( rect.right - rect.left, szBuffer + nLth + 3 );
nLth = zstrlen( szBuffer );
zstrcpy( szBuffer + nLth, " H:" );
// zltoa( rect.bottom - rect.top, szBuffer + nLth + 3 );
TraceLineI( szBuffer, rect.bottom - rect.top );
}
zOPER_EXPORT zSHORT OPERATION
ofnTZWDLGSO_AssignTag( zVIEW vSubtask,
zVIEW vDialog,
zVIEW vControl,
zPCHAR szType )
{
zVIEW vTmpDlg;
zLONG lIdx;
zSHORT nLth;
zCHAR szTag[ 25 ];
zstrcpy( szTag, szType );
nLth = zstrlen( szTag );
// Use a temp view for Dialog to make sure we are positioned on the
// Window itself for getting ControlTagCounter and not on a subcontrol.
CreateViewFromViewForTask( &vTmpDlg, vControl, 0 );
ResetView( vTmpDlg );
// Select next integer to make control tag unique.
GetIntegerFromAttribute( &lIdx, vTmpDlg, "Window", "ControlTagCounter" );
lIdx++;
SetAttributeFromInteger( vTmpDlg, "Window", "ControlTagCounter", lIdx );
zltoa( lIdx, &szTag[ nLth ] );
DropView( vTmpDlg );
SetAttributeFromString( vControl, "Control", "Tag", szTag );
return( 0 );
}
/*
The user selected a LOD in the Object list. Load the LOD meta and copy
all object operations to the editor work object.
*/
zOPER_EXPORT zSHORT OPERATION
ObjList_AddObjOpersToWorkList( zVIEW vSubtask )
{
zVIEW vObjList;
zVIEW vLOD;
zVIEW vEdWrk;
zSHORT nRC;
zSHORT nLth;
zCHAR szOpName[ 255 ];
GetWorkView( &vEdWrk );
GetViewByName( &vObjList, "TZEDCWZD_TZCMLPLO_List", vSubtask, zLEVEL_TASK );
ActivateMetaOI( vSubtask, &vLOD, vObjList, zREFER_LOD_META, 0 );
GetStringFromAttribute( szOpName, vObjList, "W_MetaDef", "Name" );
zstrcat( szOpName, "." );
nLth = zstrlen( szOpName );
for ( nRC = SetCursorFirstEntity( vLOD, "OperationList", 0 );
nRC == zCURSOR_SET;
nRC = SetCursorNextEntity( vLOD, "OperationList", 0 ) )
{
GetStringFromAttribute( &szOpName[ nLth ],
vLOD, "OperationList", "Name" );
CreateEntity( vEdWrk, "Oper", zPOS_LAST );
SetAttributeFromString( vEdWrk, "Oper", "Name", szOpName );
}
DropMetaOI( vSubtask, vLOD );
DropView( vObjList );
return( 0 );
} // ObjList_AddObjOpersToWorkList
zOPER_EXPORT zSHORT OPERATION
zwTZCMRPTD_RefreshAllComponents( zVIEW vSubtask )
{
zVIEW vTZCMLPLO;
zVIEW vTZCMRPTO;
zVIEW vCompList;
zCHAR szName[ 33 ];
zCHAR szERR_Msg[ 254 ];
if ( GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK ) > 0 )
DropObjectInstance( vTZCMRPTO );
if ( zwTZCMLPLD_OptionRefreshFromRepo( vSubtask, &vTZCMLPLO,
szName, zRefreshLPLR ) < 0 )
{
return( -1 );
}
zstrcpy( szERR_Msg, "Project '" );
GetStringFromAttribute( &szERR_Msg[ zstrlen( szERR_Msg ) ], vTZCMLPLO,
"LPLR", "Name" );
zstrcat( szERR_Msg, "' has been successfully refreshed." );
MessageSend( vSubtask, "CM00279", "Configuration Management",
szERR_Msg,
zMSGQ_OBJECT_CONSTRAINT_INFORMATION, zBEEP );
if ( GetViewByName( &vCompList, "CompList", vSubtask, zLEVEL_TASK ) >= 0 )
RefreshWindow( vCompList );
return( 0 );
} // zwTZCMRPTD_RefreshAllComponents
/* callback on tcp connections */
static void
__netio_http_cb_conn(int s, void *obj)
{
netio_http_conn_t *h = (netio_http_conn_t*)obj;
char *buf;
if (!netio_http_conn_lock(h))
return;
/* write the data! */
if ((buf = mallocz(strlen(post_header) + strlen(h->url) +
zstrlen(h->content_type) + strlen(h->host) + 64 + h->data_len))) {
int len = 0;
if (h->buf) {
sprintf(buf, post_header, h->url, h->host, h->data_len, h->content_type);
len = strlen(buf);
memcpy(buf + len, h->buf, h->data_len);
} else {
sprintf(buf, get_header, h->url, h->host);
len = strlen(buf);
}
netio_send(s, buf, len + h->data_len);
freez(buf);
h->data_len = 0;
ship_unlock(h);
} else {
netio_http_conn_close(h);
}
}
zOPER_EXPORT zSHORT OPERATION
zwTZCMRPTD_RefreshSelComponents( zVIEW vSubtask )
{
zVIEW vTZCMLPLO;
zVIEW vTZCMRPTO;
zVIEW vCompList;
zVIEW vTZCMRPTO_New;
zCHAR szName[ 33 ];
zCHAR szERR_Msg[ 254 ];
SetNameForView( vSubtask,"TZCM_ChkInWindow", vSubtask, zLEVEL_TASK );
GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK );
if ( SetCursorFirstSelectedEntity( vTZCMRPTO, "ReportLine",
"" ) < zCURSOR_SET )
{
zstrcpy( szERR_Msg, "No Component selected to Refresh." );
MessageSend( vSubtask, "CM00241", "Configuration Management",
szERR_Msg, zMSGQ_OBJECT_CONSTRAINT_WARNING, zBEEP );
return( 0 );
}
if ( zwTZCMLPLD_OptionRefreshFromRepo( vSubtask, &vTZCMLPLO,
szName, zRefreshUserDefined ) < 0 )
{
return( -1 );
}
GetViewByName( &vTZCMRPTO_New, "TZCMRPTO_New", vSubtask, zLEVEL_TASK );
// if component refreshed?
if ( CompareAttributeToInteger( vTZCMRPTO_New, "CPLR",
"ComponentRefreshed", 1 ) == 0 )
{
zstrcpy( szERR_Msg, "Project '" );
GetStringFromAttribute( &szERR_Msg[ zstrlen( szERR_Msg ) ], vTZCMLPLO,
"LPLR", "Name" );
zstrcat( szERR_Msg, "' has been successfully refreshed \nfrom CPLR '" );
zstrcat( szERR_Msg, szName );
zstrcat( szERR_Msg, "'." );
MessageSend( vSubtask, "CM00279", "Configuration Management",
szERR_Msg,
zMSGQ_OBJECT_CONSTRAINT_INFORMATION, zBEEP );
}
if ( GetViewByName( &vTZCMRPTO, "TZCMRPTO", vSubtask, zLEVEL_TASK ) > 0 )
DropObjectInstance( vTZCMRPTO );
// Build new Refresh List
if ( zwTZCMLPLD_RefreshUserDefined( vSubtask ) < 1 )
return( -1 );
RefreshWindow( vSubtask );
if ( GetViewByName( &vCompList, "CompList", vSubtask, zLEVEL_TASK ) >= 0 )
RefreshWindow( vCompList );
return( 0 );
} // zwTZCMRPTD_RefreshSelComponents
// Parameters: cpcString - address of string to add
// lFlag - 0 ==> just add string as is
// 1 ==> add string surrounded by single quotes
// 2 ==> add string surrounded by double quotes
// 4 ==> add string terminated by CRLF
// Returns: Resultant length of string in memory
zLONG
ZDrMemory::AddStringToMemory( zCPCHAR cpcString, zLONG lFlag )
{
zLONG lLth = zstrlen( cpcString );
zLONG lAddedLth = 0;
zCHAR chQuote = 0;
if ( lFlag & 3 )
{
lAddedLth += 2;
if ( lFlag & 1 )
chQuote = '\'';
else
chQuote = '"';
}
if ( lLth & 4 )
lAddedLth += 2;
if ( lLth + m_lUsed + lAddedLth >= m_lMemorySize )
{
zPCHAR pch;
zLONG lTemp;
if ( lLth > m_lMemorySize )
lTemp = lLth * 2 + lAddedLth;
else
lTemp = m_lMemorySize * 2 + lAddedLth;
DrAllocTaskMemory( (zCOREMEM) &pch, lTemp + 1 );
zstrcpy( pch, m_pchMemory );
DrFreeTaskMemory( m_pchMemory );
m_pchMemory = pch;
}
if ( chQuote )
m_pchMemory[ m_lUsed++ ] = chQuote;
zstrcpy( m_pchMemory + m_lUsed, cpcString );
m_lUsed += lLth;
if ( chQuote )
{
m_pchMemory[ m_lUsed++ ] = chQuote;
m_pchMemory[ m_lUsed ] = 0;
}
if ( lLth & 4 )
{
m_pchMemory[ m_lUsed++ ] = '\r';
m_pchMemory[ m_lUsed++ ] = '\n';
m_pchMemory[ m_lUsed ] = 0;
}
return( m_lUsed );
}
zOPER_EXPORT void OPERATION
TraceSize( zCPCHAR cpcMessage,
SIZE& size )
{
zCHAR szBuffer[ 256 ];
zSHORT nLth;
nLth = zstrlen( cpcMessage );
if ( nLth < sizeof( szBuffer ) - 32 )
zstrcpy( szBuffer, cpcMessage );
else
nLth = 0;
zstrcpy( szBuffer + nLth, " cX=" );
zltoa( size.cx, szBuffer + nLth + 4 );
nLth = zstrlen( szBuffer );
zstrcpy( szBuffer + nLth, " cY=" );
// zltoa( size.cy, szBuffer + nLth + 4 );
TraceLineI( szBuffer, size.cy );
}
zOPER_EXPORT void OPERATION
TracePoint( zCPCHAR cpcMessage,
POINT& pt )
{
zCHAR szBuffer[ 256 ];
zSHORT nLth;
nLth = zstrlen( cpcMessage );
if ( nLth < sizeof( szBuffer ) - 32 )
zstrcpy( szBuffer, cpcMessage );
else
nLth = 0;
zstrcpy( szBuffer + nLth, " X=" );
zltoa( pt.x, szBuffer + nLth + 3 );
nLth = zstrlen( szBuffer );
zstrcpy( szBuffer + nLth, " Y=" );
// zltoa( pt.y, szBuffer + nLth + 3 );
TraceLineI( szBuffer, pt.y );
}
static void
zwfnTZERRORD_WriteErrorListToFile( zVIEW vTZERROR, zLONG FileHandle,
zPCHAR szTool, zPCHAR szName, zLONG lLen )
{
zSHORT nRC;
zCHAR szMsg[500];
zCHAR szTemp[ 255 ];
zLONG i;
// write Tool and DateTime
zstrcpy( szMsg, "Zeidon: " );
zstrcat( szMsg, szTool );
zstrcat( szMsg, " Error List from " );
GetStringFromAttributeByContext( szTemp, vTZERROR, "ErrorList",
"DateTime", "DD.MM.YYYY HH:MM:SS", 20 );
zstrcat( szMsg, szTemp );
SysWriteLine( FileHandle, szMsg );
SysWriteLine( FileHandle, "" );
// write LPLR Name
GetStringFromAttribute( szTemp, vTZERROR, "ErrorList", "LPLR_Name" );
if ( szTemp[ 0 ] )
{
zstrcpy( szMsg, "Project: " );
zstrcat( szMsg, szTemp );
SysWriteLine( FileHandle, szMsg );
SysWriteLine( FileHandle, "" );
}
// write Error Message
for ( nRC = SetCursorFirstEntity( vTZERROR, "ErrorMsg", "" );
nRC >= zCURSOR_SET;
nRC = SetCursorNextEntity( vTZERROR, "ErrorMsg", "" ) )
{
GetStringFromAttribute( szTemp, vTZERROR, "ErrorMsg", "Name" );
if ( zstrcmp( szTemp, "" ) != 0 )
{
zstrcpy( szMsg, szName );
zstrcat( szMsg, ": " );
zstrcat( szMsg, szTemp );
for ( i = zstrlen( szTemp ); i < lLen; i++ )
zstrcat( szMsg, " " );
}
zstrcat( szMsg, " " );
GetStringFromAttribute( szTemp, vTZERROR, "ErrorMsg", "ErrorText" );
zstrcat( szMsg, szTemp );
SysWriteLine( FileHandle, szMsg );
}
SysWriteLine( FileHandle, "" );
SysWriteLine( FileHandle, "End of Error List" );
}
void OPERATION
ofnTZCMWKSO_AppendSlash( zPCHAR pchDirectory )
{
zLONG k;
k = zstrlen( pchDirectory );
if ( pchDirectory[ k - 1 ] != '\\' )
{
pchDirectory[ k ] = '\\';
pchDirectory[ k + 1 ] = 0;
}
}
zOPER_EXPORT void OPERATION
MakeShortString( CDC *pDC, zPCHAR pchReturn, zLONG lMaxReturnLth,
zCPCHAR cpcString, zLONG lColLth, zLONG lOffset )
{
static const _TCHAR szThreeDots[ ] = _T( "..." );
if ( lMaxReturnLth == 0 )
{
pchReturn[ 0 ] = 0;
return;
}
zstrncpy( pchReturn, cpcString, lMaxReturnLth );
pchReturn[ lMaxReturnLth ] = 0;
zSHORT nStringLth = zstrlen( cpcString );
CSize size;
zSHORT k;
zCHAR szFontFace[ 32 ];
GetTextFace( pDC->m_hDC, sizeof( szFontFace ), szFontFace );
GetTextFace( pDC->m_hAttribDC, sizeof( szFontFace ), szFontFace );
GetTextExtentPoint32( pDC->m_hDC, cpcString, nStringLth, &size );
if ( pDC->m_bPrinting )
GetTextExtentPoint32( pDC->m_hAttribDC, cpcString, nStringLth, &size );
if ( nStringLth == 0 || (size.cx + lOffset) <= lColLth )
return;
GetTextExtentPoint32( pDC->m_hDC, szThreeDots,
sizeof( szThreeDots ), &size );
zLONG lAddLth = size.cx;
for ( k = nStringLth - 1; k > 0; k-- )
{
pchReturn[ k ] = 0;
GetTextExtentPoint32( pDC->m_hDC, pchReturn, k, &size );
if ( pDC->m_bPrinting )
GetTextExtentPoint32( pDC->m_hAttribDC, pchReturn, k, &size );
if ( (size.cx + lOffset + lAddLth) <= lColLth )
break;
}
zstrcat( pchReturn, szThreeDots );
}
/****************************************************************************
FUNCTION: MainWndProc(HWND, UINT, WPARAM, LPARAM)
Processes messages
****************************************************************************/
long APIENTRY MainWndProc(HWND hWnd, /* window handle */
UINT message, /* type of message */
WPARAM wParam, /* additional information */
LPARAM lParam) /* additional information */
{
HDC hdc;
PAINTSTRUCT tPaint;
switch (message)
{
case WM_CREATE: /* message: command from application menu */
// At this time the message loop is not setup.
PostMessage( hWnd, WM_COMMAND, CMD_RUN, 0 );
return( 0 )
case WM_DESTROY: /* message: window being destroyed */
PostQuitMessage(0);
return( 0 )
case WM_COMMAND:
// now the message loop is ok
if ( wParam == CMD_RUN )
{
// Run the Application
RunAppl( hWnd );
PostQuitMessage(0);
}
return( 0 )
case WM_PAINT:
hdc = BeginPaint( hWnd, &tPaint );
SelectObject( hdc, GetStockObject (SYSTEM_FIXED_FONT) );
TextOut( hdc, 0, 0, szOutLine, zstrlen(szOutLine) );
EndPaint( hWnd, &tPaint );
return( 0 )
}
return DefWindowProc (hWnd, message, wParam, lParam);
} // MainWndProc
/////////////////////////////////////////////////////////////////////////////
//
// OPERATION: oTZDMXGPO_CommitXDM
//
// PURPOSE: Commit the current XDM to the DOMAINS.XDM file.
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
oTZDMXGPO_CommitXDM( zVIEW vSubtask, zVIEW vTZDMXGPO )
{
zVIEW vT;
zCHAR szXDM_FileName[ zMAX_FILESPEC_LTH + 1 ];
zCHAR szApplExecDir[ zMAX_FILESPEC_LTH + 1 ];
zSHORT nRC;
// Set up the XDM File Name
GetViewByName( &vT, "TaskLPLR", vSubtask, zLEVEL_TASK );
GetStringFromAttribute( szXDM_FileName, vT, "LPLR", "ExecDir" );
GetApplDirectoryFromView( szApplExecDir, vT, 2, zMAX_FILESPEC_LTH+1 );
szApplExecDir[ zstrlen( szApplExecDir ) - 1 ] = 0;
zstrcat( szXDM_FileName, "\\zeidon.xdm" );
nRC = CommitOI_ToFile( vTZDMXGPO, szXDM_FileName, zASCII );
return( nRC );
}
// "GotoURL" function by Stuart Patterson
// As seen in the August, 1997 Windows Developer's Journal.
HINSTANCE
CHyperLink::GotoURL( zCPCHAR cpcURL, int nShowCmd )
{
TCHAR pchKey[ MAX_PATH + MAX_PATH ];
// First try ShellExecute( ).
HINSTANCE hInst = ShellExecute( 0, _T( "open" ), cpcURL, 0, 0, nShowCmd );
// If it failed, get the .htm regkey and lookup the program.
if ( (UINT) hInst <= HINSTANCE_ERROR )
{
if ( GetRegKey( HKEY_CLASSES_ROOT, _T( ".htm" ), pchKey ) == ERROR_SUCCESS )
{
strcat_s( pchKey, _T( "\\shell\\open\\command" ) );
if ( GetRegKey( HKEY_CLASSES_ROOT, pchKey, pchKey ) == ERROR_SUCCESS )
{
TCHAR *pos;
pos = _tcsstr( pchKey, _T( "\"%1\"" ) );
if ( pos == 0 )
{
// No quotes found
pos = zstrstr( pchKey, _T( "%1" ) ); // check for %1 without quotes
if ( pos == 0 ) // no parameter at all ...
pos = pchKey + zstrlen( pchKey ) - 1;
else
*pos = 0; // remove the parameter
}
else
*pos = 0; // remove the parameter
strcat_s( pos, MAX_PATH + MAX_PATH - (pos - pchKey), _T( " " ) );
strcat_s( pos, MAX_PATH + MAX_PATH - (pos - pchKey), cpcURL );
hInst = (HINSTANCE) WinExec( pchKey, nShowCmd );
}
}
}
return( hInst );
}
/*
This operation builds the operation list for the OperationList window.
Depending on what the value is for vProfileXFER.ED.OpIns_CurrentType
we build different operations lists.
*/
zOPER_EXPORT zSHORT OPERATION
OpIns_BuildOperList( zVIEW vSubtask )
{
#define DISP_SELECT_SET 1
#define SEL_SELECT_SET 2
zCHAR szCurrentType[ 5 ];
zVIEW vProfileXFER;
zVIEW vEdWrk;
zSHORT nRC;
zCHAR szKeyword[ 255 ];
zLONG lSelectCount = 0;
GetWorkView( &vEdWrk );
GetProfileView( &vProfileXFER );
GetStringFromAttribute( szCurrentType, vProfileXFER, "ED",
"OpIns_CurrentType" );
// Default of CurrentType is 'Z'...
if ( *szCurrentType == 0 )
{
zstrcpy( szCurrentType, "Z" );
SetAttributeFromString( vProfileXFER, "ED", "OpIns_CurrentType",
szCurrentType );
}
// Check to see if the operations for the current type are already
// loaded. If they are, then we obviously don't need to load them again.
if ( SetCursorFirstEntityByString( vEdWrk, "OperListType", "Type",
szCurrentType, 0 ) != zCURSOR_SET )
{
// Operations haven't been loaded yet, so load 'em up.
CreateEntity( vEdWrk, "OperListType", zPOS_LAST );
SetAttributeFromString( vEdWrk, "OperListType", "Type", szCurrentType );
switch ( *szCurrentType )
{
case 'Z':
{
zVIEW vTZOPSIGK;
// Get list of Zeidon operations.
// Check to see if we've already activated the Zeidon opers list.
// If not, activate it and save the view.
GetViewByName( &vTZOPSIGK, "TZOPSIGK", vSubtask, zLEVEL_TASK );
if ( !vTZOPSIGK )
{
oTZOPGRPO_GetViewForXGO( vSubtask, &vTZOPSIGK, zSYS_CURRENT_OI );
SetNameForView( vTZOPSIGK, "TZOPSIGK", vSubtask, zLEVEL_TASK );
}
// Now copy each of the operations to the editor work object.
for ( nRC = SetCursorFirstEntity( vTZOPSIGK, "Operation", 0 );
nRC == zCURSOR_SET;
nRC = SetCursorNextEntity( vTZOPSIGK, "Operation", 0 ) )
{
CreateEntity( vEdWrk, "Oper", zPOS_LAST );
SetMatchingAttributesByName( vEdWrk, "Oper",
vTZOPSIGK, "Operation", zSET_ALL );
}
break;
} // Case 'Z'...
case 'G':
{
zVIEW vOp;
// Get list of Global operations.
RetrieveViewForMetaList( vSubtask, &vOp, zREFER_GO_META );
// Now copy each of the operations to the editor work object.
for ( nRC = SetCursorFirstEntity( vOp, "W_MetaDef", 0 );
nRC == zCURSOR_SET;
nRC = SetCursorNextEntity( vOp, "W_MetaDef", 0 ) )
{
CreateEntity( vEdWrk, "Oper", zPOS_LAST );
SetMatchingAttributesByName( vEdWrk, "Oper",
vOp, "W_MetaDef", zSET_ALL );
}
DropView( vOp );
break;
} // Case 'G'...
case 'L':
{
zVIEW vMeta;
zLONG lMetaType;
// Get list of "Local" operations. "Local" operations in this
// case mean all operations that are for the current meta.
// For example, if the current meta is a Dialog, then the "Local"
// operations include local and Dialog operations.
// Get the source view and the meta type.
GetIntegerFromAttribute( (zPLONG) &vMeta, vEdWrk, "Buffer",
"SourceViewID" );
GetIntegerFromAttribute( &lMetaType, vEdWrk, "Buffer",
"MetaType" );
// Create a new, temp view of the meta so that we can muck around
// with the cursors.
CreateViewFromViewForTask( &vMeta, vMeta, 0 );
//
// Now copy the "Local" meta operations to vEdWrk.
//
if ( lMetaType == zREFER_DIALOG_META ||
lMetaType == zREFER_LOD_META )
{
// Make sure we are reading the "Local" operations for
// the current source file.
SetCursorFirstEntityByAttr( vMeta, "SourceFile", "Name",
vEdWrk, "Buffer",
"SourceFileName", 0 );
}
// Copy all the operations to vEdWrk
for ( nRC = SetCursorFirstEntity( vMeta, "Operation", 0 );
nRC == zCURSOR_SET;
nRC = SetCursorNextEntity( vMeta, "Operation", 0 ) )
{
CreateEntity( vEdWrk, "Oper", zPOS_LAST );
SetMatchingAttributesByName( vEdWrk, "Oper",
vMeta, "Operation",
zSET_ALL );
}
DropView( vMeta );
break;
} // Case 'L'...
case 'O':
{
// Since we load the object operations by object, we don't have
// to do anything here.
break;
} // Case 'O'...
default:
SysMessageBox( "Zeidon Internal",
"This operation type not yet supported", 0 );
break;
} // switch ( *szCurrentType )...
// Now that we've loaded the operations, sort them.
OrderEntityForView( vEdWrk, "Oper", "Name A" );
} // if ( SetCursor...)...
// Disable the "Objects" button unless we are showing object operations.
if ( *szCurrentType == 'O' )
SetCtrlState( vSubtask, "ListObjects", zCONTROL_STATUS_ENABLED, TRUE );
else
SetCtrlState( vSubtask, "ListObjects", zCONTROL_STATUS_ENABLED, FALSE );
// Now set the select states depending on the keyword values.
GetStringFromAttribute( szKeyword, vProfileXFER, "ED", "OpIns_Keyword" );
if ( *szKeyword &&
CompareAttributeToString( vProfileXFER,
"ED", "OpIns_UseKeyword", "Y" ) == 0 )
{
zCHAR szIgnoreCase[ 5 ];
zPCHAR pszKeyword;
zBOOL bStartColOne;
zSHORT nKeywordLth;
// De-select all operations.
SetAllSelectStatesForEntity( vEdWrk, "Oper", FALSE, 0 );
GetStringFromAttribute( szIgnoreCase, vProfileXFER, "ED",
"OpIns_KeywordIgnoreCase" );
if ( *szIgnoreCase == 'Y' )
{
for ( pszKeyword = szKeyWord; *pszKeyword; pszKeyword++ )
*pszKeyword = ztoupper( *pszKeyword );
}
// If the keyword starts with a "/", then the keyword search starts
// with the first zCHAR (e.g. column) ONLY.
pszKeyword = szKeyword;
if ( *pszKeyword == '/' )
{
pszKeyword++;
bStartColOne = TRUE;
nKeywordLth = zstrlen( pszKeyword );
}
else
bStartColOne = FALSE;
for ( nRC = SetCursorFirstEntity( vEdWrk, "Oper", 0 );
nRC == zCURSOR_SET;
nRC = SetCursorNextEntity( vEdWrk, "Oper", 0 ) )
{
zCHAR szOperName[ 255 ];
GetStringFromAttribute( szOperName, vEdWrk, "Oper", "Name" );
if ( *szIgnoreCase == 'Y' )
strupr( szOperName );
if ( bStartColOne )
{
if ( zstrncmp( szOperName, pszKeyword, nKeywordLth ) == 0 )
{
SetSelectStateOfEntity( vEdWrk, "Oper", TRUE );
lSelectCount++;
}
}
else
{
if ( strstr( szOperName, pszKeyword ) )
{
SetSelectStateOfEntity( vEdWrk, "Oper", TRUE );
lSelectCount++;
}
}
} // for...
}
else
{
// Select all operations.
SetAllSelectStatesForEntity( vEdWrk, "Oper", TRUE, 0 );
lSelectCount = CountEntitiesForView( vEdWrk, "Oper" );
}
//SetSelectSetForView( vEdWrk, nOldSelectSet );
SetCursorFirstSelectedEntity( vEdWrk, "Oper", 0 );
LB_SetDisplaySelectSet( vSubtask, "OperationList", DISP_SELECT_SET );
LB_SetSelectSelectSet( vSubtask, "OperationList", SEL_SELECT_SET );
// Re-use szKeyword to set the message...
sprintf( szKeyword, "%d Operations listed", lSelectCount );
MB_SetMessage( vSubtask, 0, szKeyword );
RefreshWindow( vSubtask );
return( 0 );
} // OpIns_BuildOperList
zOPER_EXPORT zSHORT OPERATION
CreateSironWorkObjectList( zPCHAR szDirectoryPath, zVIEW vSubtask )
{
zVIEW vImportList;
zSHORT nRC;
HWND hWndList;
zSHORT i, nCount;
zCHAR szMetaName[ 13 ];
HWND hWnd;
HINSTANCE hInst;
nRC = GetViewByName( &vImportList, "TZSIIMLO", NULL, zLEVEL_TASK );
if ( nRC < 0 )
{
// Initialize empty list object.
ActivateEmptyObjectInstance( &vImportList, "TZSIIMLO",
vSubtask, zSINGLE );
CreateEntity( vImportList, "Root", zPOS_AFTER );
SetNameForView( vImportList, "TZSIIMLO",NULL, zLEVEL_TASK );
}
// Using the Windows interface, create an invisible window which
// contains the list of all files in the directory pased of type *.wsk.
// The *.wsk is passed to Windows to delineate the files listed.
zstrcat( szDirectoryPath, "*.WSK" );
GetWindowHandle( (zPULONG) &hWnd, 0, vSubtask, 0 );
hInst = (HINSTANCE) GetApplicationInstance( vSubtask );
hWndList = CreateWindow( "ListBox", NULL, WS_CHILD | LBS_SORT, 1, 1, 1, 1,
hWnd, (HMENU) 101, (HANDLE) hInst, NULL );
SendMessage( hWndList, WM_SETREDRAW, FALSE, 0L );
SendMessage( hWndList, LB_DIR,
0x0000, (LONG)(LPSTR) szDirectoryPath );
nCount = (int) SendMessage( hWndList, LB_GETCOUNT, 0, 0L );
if ( nCount <= 0 )
{
// If there doesn't exist a WSK file disable the buttons OK and Delete
SetCtrlState(vSubtask, "ImportWSK", zCONTROL_STATUS_ENABLED, FALSE);
SetCtrlState(vSubtask, "DeleteWSK", zCONTROL_STATUS_ENABLED, FALSE);
return( 0 );
}
for ( i = 0; i < nCount; i++ )
{
SendMessage( hWndList, LB_GETTEXT, i, (LONG)(LPSTR) szMetaName );
TraceLineS( "//// List Meta Name: ", szMetaName );
/*
* remove 4 Bytes at the end of the string (.wsk)
*/
*(szMetaName + zstrlen(szMetaName) -4 ) = 0;
// Create the List entity
CreateEntity( vImportList, "KatalogFile", zPOS_AFTER );
SetAttributeFromString( vImportList, "KatalogFile", "Name", szMetaName );
}
return( 0 );
}
void
HyphenateHD_Text( zCPCHAR cpcText, zPCHAR pchReturn, zLONG lMaxLth, zLONG lIdx )
{
zBOOL bGoodBreak = FALSE;
zLONG k;
strcpy_s( pchReturn, lMaxLth, cpcText );
// if ( zstrcmp( cpcText, "M_InsertTextKeywordTitleDU" ) == 0 )
// TraceLineS( "HyphenateCheck ", cpcText );
while ( lIdx > 5 && lIdx > (zLONG) (zstrlen( cpcText ) / 2) ) // purist's goto
{
zPCHAR pchTemp;
zPCHAR pch;
// check for lowercase/uppercase change
k = lIdx + 1;
while ( k > lIdx - 5 )
{
if ( pchReturn[ k ] == '_' || (isupper( pchReturn[ k ] ) && islower( pchReturn[ k - 1 ] )) )
{
if ( k <= lIdx )
{
bGoodBreak = TRUE;
if ( pchReturn[ k ] == '_' )
lIdx = k;
else
lIdx = k - 1;
break;
}
}
k--;
}
if ( k > lIdx - 5 )
break; // we found a good place to break
// check for standard endings that would make a good place to break the text
pchTemp = pchReturn + lIdx - 5;
if ( (pch = zstrstr( pchTemp, "ing" )) != 0 ||
(pch = zstrstr( pchTemp, "able" )) != 0 ||
(pch = zstrstr( pchTemp, "tion" )) != 0 ||
(pch = zstrstr( pchTemp, "bute" )) != 0 ||
(pch = zstrstr( pchTemp, "er" )) != 0 )
{
if ( pch < pchReturn + lIdx )
{
k = pchReturn + lIdx - pch;
lIdx -= k;
}
}
break; // get out of purist's goto (while)
}
k = ++lIdx;
if ( bGoodBreak == FALSE )
pchReturn[ lIdx++ ] = '-';
pchReturn[ lIdx++ ] = '\n';
strcpy_s( pchReturn + lIdx, lMaxLth - lIdx, cpcText + k );
}
//./ ADD NAME=fnFormatDecimalString
// Source Module=tzapdmac.c
////////////////////////////////////////////////
//
// ENTRY: fnFormatDecimalString
//
// PURPOSE: Decorate a decimal string with 'commas' and 'periods'
//
// PARAMETERS:
// pchDecString - in/out decimal string
// pchThou - points to the thousands character separator
// pchDecPt - points to the decimal point character
// lPrecision - desired number of characters to the right
// of the decimal point. Note that -1 indicates
// variable precision.
//
// RETURNS:
//
// 0 - Always this for now...
//
////////////////////////////////////////////////
//./ END + 5
zSHORT
fnFormatDecimalString( zPCHAR pchDecString,
zPCHAR pchThou,
zPCHAR pchDecPt,
zLONG lPrecision )
{
zPCHAR psz;
zPCHAR psz2;
zLONG l;
// Determine size of input string.
l = zstrlen( pchDecString );
// Locate the decimal point.
psz = zstrchr( pchDecString, '.' );
if ( psz )
{
*psz = *pchDecPt; // decimal point, as the user likes it
// A negative lPrecision value means variable decimal placement.
if ( lPrecision >= 0 )
{
zLONG los; // desired length of string for precision
los = (zLONG) (psz - pchDecString) +
(lPrecision ? 1 : 0) + lPrecision;
if ( los > l )
{
psz2 = (zPCHAR) (pchDecString + l);
while ( los > l )
{
*psz2++ = '0'; // pad with trailing zeros
l++; // adjust string length
}
*psz2 = 0; // null terminator for string
}
else
{
// This is for rounding ...
if ( l > los)
{
psz2 = pchDecString;
// Does the string need to be rounded?
if ( *(psz2 + los + (lPrecision == 0 ? 1 : 0)) > '4' )
{
l = los - 1;
while ( l != 0 &&
*(psz2 + l) == '9' || *(psz2 + l) == *pchDecPt )
{
l--;
}
if ( *(psz2 + l) == '-' )
l++;
// If the string is all 9's, add a '1' at the beginning of
// the string and propagate the rest of the string with 0's.
if ( *(psz2 + l) == '9' )
{
*(psz2 + l++) = '1';
while ( *(psz2 + l) != *pchDecPt && *(psz2 + l) )
*(psz2 + l++) = '0';
*(psz2 + l++) = '0';
// If we are at the decimal point and the attribute
// is not defined as whole number, add a ".0".
if ( lPrecision )
{
psz = psz2; // position of decimal point
*(psz2 + l++) = *pchDecPt;
*(psz2 + l++) = '0';
while ( l <= los )
*(psz2 + l++) = '0';
}
los = l;
}
else
{
// The string has a digit which requires rounding up,
// Round up the digit and change subsequent digits
// within the precision (if any) from '9' to '0'.
(*(psz2 + l++))++;
while ( l < los )
{
if ( *(psz2 + l) == *pchDecPt )
{
// if we are at the decimal point and the attribute
// is defined as whole number, quit
if ( lPrecision == 0 )
break;
}
else
*(psz2 + l) = '0';
l++;
}
los = l;
}
}
}
*(psz + (lPrecision ? 1 : 0) + lPrecision) = 0; // truncate string
l = los; // adjust string length
}
}
}
else
{
// There is no decimal point in string.
if ( lPrecision > 0 )
{
zLONG los; // desired length of string for precision
/* but we want decimal fraction to show ... */
psz = (pchDecString + l++); // point to terminator, bump str length
*psz = *pchDecPt; // append decimal pt
los = (zLONG) (psz - pchDecString) + 1 + lPrecision;
psz2 = (zPCHAR) (pchDecString + l);
while ( los > l )
{
*psz2++ = '0'; // pad with trailing zeros
l++; // adjust string length
}
*psz2 = 0; // null terminator for string.
}
else
psz = pchDecString + l; // point to string end
}
// psz is now pointing to decimal point or string end.
// If there is a thousands character, add it.
if ( pchThou != 0 )
{
while ( psz - pchDecString > 3 )
{
zPCHAR psz3;
psz -= 3;
if ( isdigit( *(psz - 1) ) )
{
/* shuffle down ... point at terminator ... bump string length */
psz2 = (zPCHAR) (pchDecString + l++);
psz3 = psz2 + 1;
while ( psz3 > psz )
{
*psz3-- = *psz2--; // move to the right
}
*psz = *pchThou; // insert thousands separator
}
else
break;
}
}
return( 0 );
}
///////////////////////////////////////////////////////////////////////
//
// PURPOSE: This function paints the list attributes from the user spec
// into the existing partition.
//
////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zLONG OPERATION
ofnTZWDLGSO_AutoPntFldPartWLits( zVIEW vSubtask,
zVIEW vUserSpec,
zVIEW vNewDialog,
zPCHAR szListType )
{
zVIEW vAutoDesWk;
zVIEW vSubobject;
zVIEW vTempStyle;
zVIEW vCtrlDef;
zLONG k, j;
zLONG lCC, lCL;
zLONG lMaxLines;
zLONG lLine, lFirstPaintLine, lFieldsPainted, lColumn;
zLONG lMaxFieldDLG_X, lMaxText, lPush;
zLONG lGroupDLG_X, lGroupDLG_Y;
zSHORT RESULT;
zLONG lLastPaintLine, lLastWindowLine, lMaxLength;
// zCHAR cUsage[ 1 ];
zCHAR szMapEntity[ 33 ];
zCHAR szMapAttribute[ 33 ];
zCHAR szType[ 33 ];
zCHAR szWorkString[ 256 ];
zCHAR X_LOD_Attribute[ 16 ];
zCHAR X_ER_Attribute[ 15 ];
// TraceLineS( "IN", " AutoPaintPartitionWithFields" );
// Set up variables to either I_LOD listbox or L_LOD listbox.
if ( szListType[ 0 ] == 'I' )
{
zstrcpy( X_LOD_Attribute, "I_LOD_Attribute" );
zstrcpy( X_ER_Attribute, "I_ER_Attribute" );
}
else
{
zstrcpy( X_LOD_Attribute, "L_LOD_Attribute" );
zstrcpy( X_ER_Attribute, "L_ER_Attribute" );
}
// TraceLineS( "IN", " AutoPaintPartitionWithFields" );
GetViewByName( &vCtrlDef, "TZADCTLD", vNewDialog, zLEVEL_TASK );
GetViewByName( &vAutoDesWk, "TZADWWKO", vNewDialog, zLEVEL_TASK );
CreateViewFromViewForTask( &vSubobject, vNewDialog, 0 );
lCL = 12;
lCC = 5;
/* Create a new view that will point to the UIS_ViewObjRef entity
in the user spec object. Sometimes vUserSpec is pointing to a
recursive subobject and UI_ViewObjRef cannot be accessed. */
CreateViewFromViewForTask( &vTempStyle, vUserSpec, 0 );
ResetView( vTempStyle );
SetViewToSubobject( vSubobject, "CtrlCtrl" );
/* Delete any existing fields in the listbox */
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
RESULT = DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
}
GetIntegerFromAttribute( &lMaxLines, vNewDialog, "Control", "SZDLG_Y" );
szMapEntity[ 0 ] = 0;
lFirstPaintLine = 0;
lLastPaintLine = 1;
lLine = 1;
lMaxFieldDLG_X = 0;
lMaxLength = 0;
lMaxText = 0;
lPush = 0;
lFieldsPainted = 0;
// cUsage[ 0 ] = 'U';
/* If there is a paint object, loop through its attributes */
RESULT = SetCursorFirstEntity( vUserSpec, X_LOD_Attribute, "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
/* The last line painted was at this posititon */
lLastPaintLine = lLine;
lColumn = 1;
/* Create the Text Field for the Attribute */
CreateMetaEntity( vSubtask, vSubobject, "Control", zPOS_AFTER );
SetAttributeFromInteger( vSubobject, "Control",
"PSDLG_Y", lLine );
if ( lFirstPaintLine == 0 )
lFirstPaintLine = lLine;
SetAttributeFromInteger( vSubobject, "Control",
"PSDLG_X", lColumn );
/* Creating text field. */
SetCursorFirstEntityByString( vCtrlDef, "ControlDef",
"Tag", "Text", "" );
IncludeSubobjectFromSubobject( vSubobject, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
// Remove the text border.
SetAttributeFromInteger( vSubobject, "Control", "Subtype",
zCONTROL_BORDEROFF | zCONTROL_NOTABSTOP );
GetStringFromAttribute( szWorkString, vUserSpec,
X_ER_Attribute, "ListPaintLit" );
GetStringFromAttribute( szMapAttribute, vUserSpec,
X_ER_Attribute, "Name" );
// If there is no paint literal for this attribute then
// use the attribute name as the paint literal.
if ( szWorkString[ 0 ] == 0 )
zstrcpy( szWorkString, szMapAttribute );
SetAttributeFromString( vSubobject, "Control", "Text", szWorkString );
j = zstrlen( szWorkString );
j = j * lCC;
// Determine the size of the longest paint literal.
if ( j > lMaxText )
lMaxText = j;
SetAttributeFromInteger( vSubobject, "Control", "SZDLG_X", j );
SetAttributeFromInteger( vSubobject, "Control", "SZDLG_Y", lCL );
/* Add the length of the longest paint literal
to the column so the attribute field will be
painted there */
lColumn += j;
lColumn = lColumn + lCC;
// If there is no paint length for the field, then
// use the field's length.
j = ofnTZWDLGSO_GetSizeForListAttr( vSubtask, vUserSpec, szListType );
j = j * lCC;
// If there is no paint length for the field, then
// use the field's length.
if ( j > 100 )
j = 100;
else
if ( j < 25 )
j = 25;
// Create the appropriate Data Field for the Attribute.
CreateMetaEntity( vSubtask, vSubobject, "Control", zPOS_AFTER );
SetAttributeFromInteger( vSubobject, "Control",
"PSDLG_Y", lLine );
SetAttributeFromInteger( vSubobject, "Control",
"PSDLG_X", lColumn );
SetAttributeFromInteger( vSubobject, "Control",
"SZDLG_X", j );
SetAttributeFromInteger( vSubobject, "Control",
"SZDLG_Y", lCL );
// Determine the maximum column length.
if ( lMaxFieldDLG_X < lColumn )
lMaxFieldDLG_X = lColumn;
lColumn += j;
lColumn = lColumn - 1 * lCC;
// Determine the maximum length of colum and literal.
if ( lMaxLength < lColumn )
lMaxLength = lColumn;
SetCursorFirstEntityByString( vCtrlDef, "ControlDef",
"Tag", "EditBox", "" );
IncludeSubobjectFromSubobject( vSubobject, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
// SetAttributeFromInteger( vSubobject, "Control", "Type", 1010 );
/*
if ( cUsage[ 0 ] == 'U' )
{
GetStringFromAttribute( cWork, vUserSpec,
X_LOD_Attribute, "DERIVEDF" );
if ( cWork[ 0 ] != 0 )
SetAttributeFromCharacter( vSubobject,
"Control", "Type", 1000 );
}
*/
/* setting the group and field's ENAME and ANAME */
CreateMetaEntity( vSubtask, vSubobject, "CtrlMap", zPOS_AFTER );
/* set the partitions OI name */
IncludeSubobjectFromSubobject( vSubobject, "CtrlMapView",
vTempStyle, "UIS_ViewObjRef", zPOS_AFTER );
IncludeSubobjectFromSubobject( vSubobject, "CtrlMapLOD_Attribute",
vUserSpec, X_LOD_Attribute, zPOS_AFTER );
lFieldsPainted++;
lLine = lLine + lCL;
RESULT = SetCursorNextEntity( vUserSpec, X_LOD_Attribute, "" );
}
lLastPaintLine = lLine;
/* Get the dimensions of the partition. */
GetIntegerFromAttribute( &lGroupDLG_X, vNewDialog, "Control", "SZDLG_X" );
GetIntegerFromAttribute( &lGroupDLG_Y, vNewDialog, "Control", "SZDLG_Y" );
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
GetIntegerFromAttribute( &lLine, vSubobject, "Control", "PSDLG_Y" );
if ( lLine >= lFirstPaintLine && lLine <= lLastPaintLine )
{
GetStringFromAttribute( szType, vSubobject, "ControlDef", "Tag" );
/* If the control is not a text control. */
if ( zstrcmp( szType, "Text" ) != 0 )
{
GetIntegerFromAttribute( &j, vSubobject, "Control", "PSDLG_X" );
GetIntegerFromAttribute( &k, vSubobject, "Control", "SZDLG_X" );
if ( j < lMaxFieldDLG_X )
{
j = lMaxFieldDLG_X - j;
if ( ( lMaxFieldDLG_X + k ) >
( lMaxLength + lCC ) )
{
if ( ( lMaxFieldDLG_X + k ) <= lGroupDLG_X )
{
lMaxLength = lMaxFieldDLG_X +( k - lCC );
}
else
{
j -=( ( lMaxFieldDLG_X + k ) -
lGroupDLG_X );
if ( j > 0 )
{
AddToAttributeFromInteger( vSubobject, "Control",
"PSDLG_X", j );
lMaxLength = lGroupDLG_X - lCC;
j = -1;
}
}
}
if ( j > 0 )
{
SetAttributeFromInteger( vSubobject, "Control",
"PSDLG_X", lMaxFieldDLG_X );
}
}
}
GetIntegerFromAttribute( &j, vSubobject, "Control", "PSDLG_X" );
GetIntegerFromAttribute( &k, vSubobject, "Control", "SZDLG_X" );
if ( ( j + k ) >= lGroupDLG_X )
{
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
RESULT = DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
}
MessageSend( vNewDialog, "AD10304", "Autodesigner",
"Partition too small( width )",
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
/* the partition is not wide enough */
return( -1 );
}
///////////////////////////////////////////////////////////
// Code to truncate fields which extend over the partition to
// the right COMMENTED out. This is a 'too small' error as
// noted above.
// else
// if ( (j + k) >= lGroupDLG_X )
// {
// k =( lGroupDLG_X - 1 ) - j;
// SetAttributeFromInteger( vSubobject, "Control",
// "SZDLG_X", k );
// }
////////////////////////////////////////////////////////////
}
RESULT = SetCursorNextEntity( vSubobject, "Control", "" );
}
lLastWindowLine = lLine;
/* If the window painted has too many lines for the
terminal being used for painting. Attempt to
compress the window into a more manageable size by combining
painted fields which are located on separate lines */
/*
for ( i = 1; i < 8; i++ )
{
if ( lLastWindowLine + 12 <= lMaxLines )
{
break;
}
fnCompressPartition( vNewDialog, i, lFirstPaintLine, lMaxText,
lMaxLines,
&lLastPaintLine, &lLastWindowLine,
&lMaxLength );
}
*/
if ( ( lLastWindowLine + lCL ) > lMaxLines )
{
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
RESULT = DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
}
MessageSend( vNewDialog, "AD10305", "Autodesigner",
"Partition too small( height )",
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
return( -1 );
}
// TraceLineS( "END", " AutoPaintPartitionWithFields" );
/* Return the last paint line for AutoDesign */
return( lLastPaintLine );
}
/////////////////////////////////////////////////////////////////////////////
//
// ENTRY: CreateListBox
//
// PURPOSE: This function creates a listbox with the given
// specifications and then autodesigns this listbox with
// the LISTATTRIB attributes for the listbox's entity.
// In addition to auto designing the listbox's fields, any
// actions defined for the listbox(in the style object)
// get autodesigned.
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
ofnTZWDLGSO_CreateListBox( zVIEW vSubtask,
zVIEW vNewDialog,
zVIEW vUserSpec,
zLONG lStart_X,
zLONG lStart_Y,
zLONG lHeight,
zPCHAR szListType )
{
zVIEW vCtrlDef;
zVIEW vTZPNCTWO;
zLONG lTotalLth;
zLONG lAttribLth;
zLONG lPaintLth;
zLONG lCC;
zLONG lCL;
zSHORT RESULT;
zCHAR szPaintStr[ 50 ];
zCHAR X_LOD_Attribute[ 16 ];
zCHAR X_ER_Attribute[ 15 ];
// TraceLineS("IN", "AutoPaintLstListPart W4" );
// Set up variables to either I_LOD listbox or L_LOD listbox.
if ( szListType[ 0 ] == 'I' )
{
strcpy_s( X_LOD_Attribute, zsizeof( X_LOD_Attribute ), "I_LOD_Attribute" );
strcpy_s( X_ER_Attribute, zsizeof( X_ER_Attribute ), "I_ER_Attribute" );
}
else
{
strcpy_s( X_LOD_Attribute, zsizeof( X_LOD_Attribute ), "L_LOD_Attribute" );
strcpy_s( X_ER_Attribute, zsizeof( X_ER_Attribute ), "L_ER_Attribute" );
}
lCC = 5;
lCL = 12;
GetViewByName( &vCtrlDef, "TZADCTLD", vNewDialog, zLEVEL_TASK );
// TraceLineS("IN", "CreateListBox W3" );
/* Create the listbox. */
CreateMetaEntity( vSubtask, vNewDialog, "Control", zPOS_AFTER );
SetCursorFirstEntityByString( vCtrlDef, "ControlDef", "Tag", "ListBox", "" );
IncludeSubobjectFromSubobject( vNewDialog, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
SetAttributeFromInteger( vNewDialog, "Control", "PSDLG_X", lStart_X );
SetAttributeFromInteger( vNewDialog, "Control", "PSDLG_Y", lStart_Y );
// We must set the CtrlBOI.
ActivateEmptyObjectInstance( &vTZPNCTWO, "TZPNCTWO",
vUserSpec, zSINGLE );
CreateEntity( vTZPNCTWO, "TZPNCTWO", zPOS_AFTER );
CreateEntity( vTZPNCTWO, "ListBox", zPOS_AFTER );
SetAttributeFromInteger( vTZPNCTWO, "ListBox", "Subtype", 8192 );
// Set Control.CtrlBOI from work entity GroupBox
SetBlobFromEntityAttributes( vNewDialog, "Control",
"CtrlBOI", vTZPNCTWO, "ListBox" );
DropView( vTZPNCTWO );
// Set the control subtype to 0(Single).
SetAttributeFromInteger( vNewDialog, "Control", "Subtype", 8192 );
lTotalLth = 0;
if ( CheckExistenceOfEntity ( vUserSpec, X_LOD_Attribute ) != 0 )
lTotalLth = 5;
// Loop through the L_LOD_Attribute and find the total width needed
// for this listbox.
RESULT = SetCursorFirstEntity( vUserSpec, X_LOD_Attribute, "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
lAttribLth = ofnTZWDLGSO_GetSizeForListAttr( vSubtask, vUserSpec,
szListType );
if ( lAttribLth > 20 )
lAttribLth = 20;
if ( lAttribLth < 5 )
lAttribLth = 5;
GetStringFromAttribute( szPaintStr, zsizeof( szPaintStr ), vUserSpec,
X_ER_Attribute, "ListPaintLit" );
if ( szPaintStr[ 0 ] == 0 )
{
GetStringFromAttribute( szPaintStr, zsizeof( szPaintStr ), vUserSpec,
X_ER_Attribute, "PromptPaintLit" );
}
if ( szPaintStr[ 0 ] == 0 )
{
GetStringFromAttribute( szPaintStr, zsizeof( szPaintStr ), vUserSpec,
X_ER_Attribute, "Name" );
/* Add a ':' to the end. */
strcat_s( szPaintStr, zsizeof( szPaintStr ), ":" );
/* Add spaces before any capital letters. */
AddSpacesToString( szPaintStr );
}
lPaintLth = zstrlen( szPaintStr );
if ( lPaintLth > 20 )
lPaintLth = 20;
if ( lPaintLth < 5 )
lPaintLth = 5;
if ( lAttribLth > lPaintLth )
lTotalLth = lTotalLth + lAttribLth + 1;
else
lTotalLth = lTotalLth + lPaintLth + 1;
RESULT = SetCursorNextEntity( vUserSpec, X_LOD_Attribute, "" );
}
lTotalLth ++;
SetAttributeFromInteger( vNewDialog, "Control",
"SZDLG_X", lTotalLth * lCC );
SetAttributeFromInteger( vNewDialog, "Control", "SZDLG_Y", lHeight );
// TraceLineS("END", "CreateListBox W3" );
return( 0 );
}
/////////////////////////////////////////////////////////////////////////////
//
// PURPOSE: This function places the paint literals of selected
// attributes above the fields in a partition or list box.
//
// vNewDialog - handle to the group
// OffsetDLG_Y - offset row to the group
// OffsetDLG_X - offset column to the group
// PartitionSize - length size of the group
//
// Return Codes:
// 0 - Everything is O.K. and the literals were placed into the
// partition
// -1 - The literal widths exceeded the partitions width
//
////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
ofnTZWDLGSO_AutoPaintLstLitPart( zVIEW vSubtask,
zVIEW vUserSpec,
zVIEW vNewDialog,
zLONG OffsetDLG_Y,
zLONG OffsetDLG_X,
zLONG PartitionSize,
zPCHAR szListType )
{
zVIEW vCtrlDef;
zLONG lCC;
zLONG lCL;
zLONG lFieldCol;
zLONG lListAttributeLength;
zLONG lPaintLiteralLength;
zCHAR sPaintLiteral[ 65 ];
zSHORT RESULT;
zLONG lTempInteger_1;
zLONG lTempInteger_2;
zCHAR X_LOD_Attribute[ 16 ];
zCHAR X_ER_Attribute[ 15 ];
// TraceLineS("IN", "AutoPaintLstListPart W4" );
// Set up variables to either I_LOD listbox or L_LOD listbox.
if ( szListType[ 0 ] == 'I' )
{
zstrcpy( X_LOD_Attribute, "I_LOD_Attribute" );
zstrcpy( X_ER_Attribute, "I_ER_Attribute" );
}
else
{
zstrcpy( X_LOD_Attribute, "L_LOD_Attribute" );
zstrcpy( X_ER_Attribute, "L_ER_Attribute" );
}
lCC = 5;
lCL = 12;
GetViewByName( &vCtrlDef, "TZADCTLD", vNewDialog, zLEVEL_TASK );
lFieldCol = 1;
RESULT = SetCursorFirstEntity( vUserSpec, X_LOD_Attribute, "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
/* This gets the length of the field to be painted */
lListAttributeLength = ofnTZWDLGSO_GetSizeForListAttr( vSubtask,
vUserSpec,
szListType );
lListAttributeLength = lListAttributeLength * lCC;
/* Limit the size of the attribute length. */
if ( lListAttributeLength > 100 )
lListAttributeLength = 100;
if ( lListAttributeLength < 25 )
lListAttributeLength = 25;
/* Get the paint literal */
GetStringFromAttribute( sPaintLiteral, vUserSpec,
X_ER_Attribute, "ListPaintLit" );
if ( sPaintLiteral[ 0 ] == 0 )
GetStringFromAttribute( sPaintLiteral, vUserSpec,
X_ER_Attribute, "PromptPaintLit" );
if ( sPaintLiteral[ 0 ] == 0 )
{
GetStringFromAttribute( sPaintLiteral, vUserSpec,
X_ER_Attribute, "Name" );
/* Add a ':' to the end. */
zstrcat( sPaintLiteral, ":" );
/* Add spaces before any capital letters. */
AddSpacesToString( sPaintLiteral );
}
lPaintLiteralLength = zstrlen( sPaintLiteral );
lPaintLiteralLength = lPaintLiteralLength * lCC;
/* Limit the size of the literal length. */
if ( lPaintLiteralLength > 100 )
lPaintLiteralLength = 100;
if ( lPaintLiteralLength < 25 )
lPaintLiteralLength = 25;
/*
lTempInteger_1 = CheckForOverlappingFields( vNewDialog, OffsetDLG_Y,
OffsetDLG_Y + nCL,
lFieldCol + OffsetDLG_X - lCC, lFieldCol + OffsetDLG_X + lPaintLiteralLength - lCC );
*/
lTempInteger_1 = 0;
/* Check to see IF there is a field or group located above
the listbox that would be in the way of painting the literals */
if ( lTempInteger_1 == -1 )
{
/* Cannot place text fields above the listbox because of
either a field or a group */
/* InformationMessage( "Field literals can't fit because of FIELD or GROUP" ); */
MessageSend( vUserSpec, "AD10301", "Autodesigner",
"Field literals can't fit because of FIELD or GROUP",
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
return( -1 );
}
/* Add the listbox literals at the end of the client fields.
This makes a difference in fnCompressWindow in autodesigning.*/
SetCursorLastEntity( vNewDialog, "Control", "" );
/* Do not continue to add fields into the list box if
the field sizes exceed the size of the list box */
/* If the field attribute length is greater than the text
literal length, then add the field attribute length
to lFieldCol. */
if ( lPaintLiteralLength < lListAttributeLength )
{
/* If the length of lFieldCol is greater than the
partition size, then RETURN */
if ( lFieldCol + lListAttributeLength > PartitionSize )
{
return( 1 );
}
}
else
{
/* If the length of lFieldCol is greater than the
partition size, then RETURN */
if ( lFieldCol + lPaintLiteralLength > PartitionSize )
{
return( 1 );
}
}
/* Create literals for the list box */
CreateMetaEntity( vSubtask, vNewDialog, "Control", zPOS_AFTER );
SetCursorFirstEntityByString( vCtrlDef, "ControlDef", "Tag", "Text", "" );
IncludeSubobjectFromSubobject( vNewDialog, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
/* Remove the text border. */
SetAttributeFromInteger( vNewDialog, "Control", "Subtype",
zCONTROL_BORDEROFF | zCONTROL_NOTABSTOP );
SetAttributeFromInteger( vNewDialog, "Control",
"PSDLG_Y", OffsetDLG_Y );
lTempInteger_2 = OffsetDLG_X + lFieldCol - lCC;
SetAttributeFromInteger( vNewDialog, "Control",
"PSDLG_X", lTempInteger_2 );
SetAttributeFromInteger( vNewDialog, "Control",
"SZDLG_X", lPaintLiteralLength );
SetAttributeFromInteger( vNewDialog, "Control",
"SZDLG_Y", 10 );
ofnTZWDLGSO_AssignTag( vSubtask, vNewDialog, vNewDialog, "ListText" );
SetAttributeFromString( vNewDialog, "Control",
"Text", sPaintLiteral );
/* If the field length is longer than the paint literal,
then position the next field by using the field length,
otherwise position the next field by using the paint
literal length */
if ( lPaintLiteralLength < lListAttributeLength )
{
lFieldCol = lFieldCol + lListAttributeLength + lCC;
}
else
{
lFieldCol = lFieldCol + lPaintLiteralLength + lCC;
}
RESULT = SetCursorNextEntity( vUserSpec, X_LOD_Attribute, "" );
}
// TraceLineS("END", "AutoPaintLstListPart W4" );
return( 0 );
}
zSHORT
fnFormatCurrencyText( zVIEW vSubtask,
zPCHAR pchDecString,
zPCHAR pchThou,
zPCHAR pchDecPt,
zLONG lPrecision )
{
char szCurrencyText[ zMAX_DECIMAL_STRING ];
zPCHAR pcDecimal;
zPCHAR pch;
zSHORT nLth;
zSHORT nCurrencyLth;
zSHORT nPlace;
zSHORT nPower;
// Check if there is a decimal point
pcDecimal = zstrchr( pchDecString, '.' );
if ( pcDecimal )
{
*pcDecimal = 0;
pcDecimal++;
}
else
{
pcDecimal = pchDecString + zstrlen( pchDecString );
}
// Remove leading blanks or zeros.
pch = pchDecString;
while ( *pch == ' ' || *pch == '0' )
pch++;
// Handle case of no nonzero value.
nLth = zstrlen( pch );
if ( nLth == 0 )
{
strcpy_s( szCurrencyText, zsizeof( szCurrencyText ), pcDecimal );
strcpy_s( pchDecString, "0" );
strcpy_s( pchDecString + 2, szCurrencyText );
pch = pchDecString;
pcDecimal = pchDecString + 2;
nLth = 1;
}
// Leading zeros have been eliminated except for the essential one in
// the one's place.
// Process whole number part of decimal.
szCurrencyText[ 0 ] = 0;
nCurrencyLth = 0;
while ( nLth )
{
nPlace = (nLth - 1) / 3;
nPower = nLth % 3; // Hundreds = 3, Tens = 2, Ones = 1
if ( nPower == 0 )
nPower = 3;
switch ( nPlace )
{
case zPLACE_TRILLIONS:
{
nCurrencyLth += HundredsTensOnes( vSubtask,
szCurrencyText + nCurrencyLth,
pch, IDS_TRILLION, nPower );
break;
}
case zPLACE_BILLIONS:
{
nCurrencyLth += HundredsTensOnes( vSubtask,
szCurrencyText + nCurrencyLth,
pch, IDS_BILLION, nPower );
break;
}
case zPLACE_MILLIONS:
{
nCurrencyLth += HundredsTensOnes( vSubtask,
szCurrencyText + nCurrencyLth,
pch, IDS_MILLION, nPower );
break;
}
case zPLACE_THOUSANDS:
{
nCurrencyLth += HundredsTensOnes( vSubtask,
szCurrencyText + nCurrencyLth,
pch, IDS_THOUSAND, nPower );
break;
}
case zPLACE_ONES:
{
nCurrencyLth += HundredsTensOnes( vSubtask,
szCurrencyText + nCurrencyLth,
pch, 0, nPower );
break;
}
default:
{
fnFormatDecimalString( pchDecString, pchThou,
pchDecPt, lPrecision );
return( 1 );
}
}
pch += nPower;
nLth -= nPower;
while ( *pch == '0' )
{
pch++;
nLth--;
}
}
// Add "AND" between whole number & decimal part.
nCurrencyLth += fnLoadString( vSubtask,
"domainc", IDS_AND,
szCurrencyText + nCurrencyLth,
zMAX_DECIMAL_STRING - nCurrencyLth );
szCurrencyText[ nCurrencyLth++ ] = ' ';
// Process decimal part of number.
// If the decimal portion is not filled with digits, fill it with zeros.
if ( *pcDecimal == 0 )
{
*pcDecimal = '0';
*(pcDecimal + 1) = '0';
}
else
if ( *(pcDecimal + 1) == 0 )
{
*(pcDecimal + 1) = '0';
}
*(pcDecimal + 2) = 0;
nCurrencyLth += TensOnes( vSubtask, szCurrencyText + nCurrencyLth,
pcDecimal, 2 );
nCurrencyLth += fnLoadString( vSubtask,
"domainc", IDS_HUNDRETHS_DOLLARS,
szCurrencyText + nCurrencyLth,
zMAX_DECIMAL_STRING - nCurrencyLth );
strcpy_s( pchDecString, szCurrencyText );
return( 0 );
}
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
//
// OPERATION: CreateCommaSeparatedList
//
// N.B. The user is responsible for calling DeleteCommaSeparatedList
// with the handle returned from this call. If not, a memory
// leak will occur!!!
//
// lFlags - 0x00000001 ==> use only selected entities
// 0x00000002 ==> use only parent-selected entities
// 0x00000004 ==> use semi-colon to separate (rather than comma)
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zLONG OPERATION
CreateCommaSeparatedList( zVIEW v,
zCPCHAR cpcEntityName,
zCPCHAR cpcAttributeName,
zCPCHAR cpcContext,
zCPCHAR cpcScope,
zLONG lFlags )
{
zCHAR szParentEntity[ 33 ];
zPCHAR lpMemory;
zLONG lEntityCnt;
zULONG ulAttributeLth;
zLONG lTotalSize;
zLONG lLth = 0;
zCHAR cSeparator;
zSHORT nRC;
if ( (lFlags & 0x00000002) )
{
MiGetParentEntityNameForView( szParentEntity, v, cpcEntityName );
// if ( szParentEntity[ 0 ] )
// SetCursorFirstEntity( v, szParentEntity, cpcScope );
}
if ( (lFlags & 0x00000004) == 0 )
cSeparator = ',';
else
cSeparator = ';';
lEntityCnt = CountEntitiesForView( v, cpcEntityName );
GetAttributeDisplayLength( &ulAttributeLth, v, cpcEntityName,
cpcAttributeName, cpcContext );
lTotalSize = lEntityCnt * (zLONG) ulAttributeLth; // a starting point
DrAllocTaskMemory( (zCOREMEM) &lpMemory, lTotalSize + 1 );
// For each entity, append the specified data to the list.
// nRC = SetCursorFirstEntity( v, cpcEntityName, cpcScope );
nRC = SetEntityCursor( v, cpcEntityName, 0, zPOS_FIRST,
0, 0, 0, 0, cpcScope, 0 );
while ( nRC > zCURSOR_UNCHANGED )
{
if ( (lFlags & 0x00000001) == 0 ||
((lFlags & 0x00000001) &&
GetSelectStateOfEntity( v, cpcEntityName ) != 0) ||
((lFlags & 0x00000002) &&
GetSelectStateOfEntity( v, szParentEntity ) != 0) )
{
GetVariableFromAttribute( lpMemory + lLth, 0, zTYPE_STRING,
lTotalSize - lLth - 1, v,
cpcEntityName, cpcAttributeName,
cpcContext,
cpcContext && *cpcContext ?
0: zUSE_DEFAULT_CONTEXT );
lLth = zstrlen( lpMemory );
while ( lLth > 0 && lpMemory[ lLth - 1 ] == ' ' )
{
lLth--;
lpMemory[ lLth ] = 0;
}
}
// nRC = SetCursorNextEntity( v, cpcEntityName, cpcScope );
nRC = SetEntityCursor( v, cpcEntityName, 0, zPOS_NEXT,
0, 0, 0, 0, cpcScope, 0 );
if ( nRC > zCURSOR_UNCHANGED )
{
// lLth = zstrlen( lpMemory );
if ( lTotalSize - lLth < (zLONG) ulAttributeLth )
{
zPCHAR lpTemp;
lEntityCnt *= 2;
lTotalSize = lEntityCnt * (zLONG) ulAttributeLth;
DrAllocTaskMemory( (zCOREMEM) &lpTemp, lTotalSize + 1 );
zmemcpy( lpTemp, lpMemory, lLth );
DrFreeTaskMemory( lpMemory );
lpMemory = lpTemp;
}
if ( lLth > 0 && lpMemory[ lLth - 1 ] != cSeparator )
{
lpMemory[ lLth++ ] = cSeparator;
lpMemory[ lLth ] = 0;
}
}
}
return( (zLONG) lpMemory );
}
/* dumps the current status of all mediaproxies as a json blob */
int
sipp_mp_dump_json(char **msg)
{
int buflen = 0, datalen = 0;
char *buf = 0;
void *ptr = 0, *ptr2 = 0;
sipp_media_proxy_t *mp = NULL;
char *tmpaddr1 = 0, *tmpaddr2 = 0, *tmp = 0;
ship_list_t *callids = 0;
char *str = 0;
int ret = -1;
ship_lock(sipp_mps);
/* collect callids */
ASSERT_TRUE(callids = ship_list_new(), err);
while ((mp = ship_list_next(sipp_mps, &ptr))) {
int found = 0;
while (!found && (str = ship_list_next(callids, &ptr2))) {
if (!strcmp(str, mp->callid))
found = 1;
}
if (!found) {
ship_list_add(callids, mp->callid);
}
}
/* for each call id .. */
ASSERT_TRUE(buf = append_str("var p2pship_mps = {\n", buf, &buflen, &datalen), err);
ptr2 = 0;
while ((str = ship_list_next(callids, &ptr2))) {
ASSERT_TRUE(buf = append_str(" \"", buf, &buflen, &datalen), err);
ASSERT_TRUE(buf = append_str(str, buf, &buflen, &datalen), err);
ASSERT_TRUE(buf = append_str("\" : [\n", buf, &buflen, &datalen), err);
ptr = 0;
while ((mp = ship_list_next(sipp_mps, &ptr))) {
int len = 0;
if (!strcmp(mp->callid, str)) {
ASSERT_ZERO(ident_addr_addr_to_str(&(mp->local_addr), &tmpaddr1), err);
ASSERT_ZERO(ident_addr_addr_to_str(&(mp->remote_addr), &tmpaddr2), err);
len = zstrlen(mp->sip_aor) + zstrlen(tmpaddr1) + zstrlen(mp->remote_aor) + zstrlen(tmpaddr2) +
zstrlen(mp->callid) + zstrlen(mp->mediatype) + 512;
ASSERT_TRUE(tmp = mallocz(len), err);
sprintf(tmp, " [ \"%s\", \"%s\", \"%s\", \"%s\", \"%s\",\n \"%s\", \"%s\", \"%d\", \"%d\", \"%d\", \"%d\" ],\n",
mp->sip_aor, tmpaddr1, mp->remote_aor, tmpaddr2, sipp_mp_sendby_str(mp->sendby),
mp->callid, mp->mediatype,
mp->started, (int)mp->start_time, (int)mp->last, mp->counter);
ASSERT_TRUE(buf = append_str(tmp, buf, &buflen, &datalen), err);
freez(tmp);
freez(tmpaddr1);
freez(tmpaddr2);
}
}
ASSERT_TRUE(replace_end(buf, &buflen, &datalen, ",\n", "\n"), err);
ASSERT_TRUE(buf = append_str(" ],\n", buf, &buflen, &datalen), err);
}
ASSERT_TRUE(replace_end(buf, &buflen, &datalen, ",\n", "\n"), err);
ASSERT_TRUE(buf = append_str("};\n", buf, &buflen, &datalen), err);
*msg = buf;
buf = 0;
ret = 0;
err:
ship_unlock(sipp_mps);
ship_list_free(callids);
freez(buf);
freez(tmpaddr1);
freez(tmpaddr2);
freez(tmp);
return ret;
}
zSHORT
fnGetCurrencyText( LPDOMAINDATA lpDomainData )
{
LPDOMAIN lpDomain;
zLPCONTEXT lpContext;
zSHORT nRC;
zCHAR sz[ 200 ];
zPCHAR lpAttrValue;
zCHAR cAttrType;
zULONG uAttrLength;
zBOOL bWasNull = FALSE;
zCHAR szThou[ 10 ];
zCHAR szDecPt[ 10 ];
zLONG lPrecision;
zDECIMAL dDecimal;
zDECIMAL dNullDecimal;
lpDomain = (LPDOMAIN) SysGetPointerFromHandle( lpDomainData->lpViewAttribute->hDomain );
SysAssignDecimalFromNull( &dNullDecimal );
if ( lpDomainData->lpViewAttribute->cType != zTYPE_DECIMAL )
{
*sz = lpDomainData->lpViewAttribute->cType;
*(sz + 1) = 0;
strcat_s( sz, zsizeof( sz ), ", " );
strcat_s( sz, zsizeof( sz ), lpDomainData->lpViewEntity->szName );
MessageSend( lpDomainData->zView, "", "Domain System Error",
sz, zMSGQ_DOMAIN_ERROR, 0 );
return( zCALL_ERROR );
}
// determine output data type
switch ( lpDomainData->cType )
{
case zTYPE_STRING:
// Get a pointer to the attribute value.
nRC = GetValueFromRecord( lpDomainData->zView,
lpDomainData->lpViewEntity,
lpDomainData->lpViewAttribute,
&lpAttrValue, &cAttrType, &uAttrLength );
if ( nRC )
return( zCALL_ERROR );
// if there is no lpRecord, lpAttrValue returns a null...
if ( lpAttrValue == 0 )
lpAttrValue = (zPCHAR) &dNullDecimal;
// Get the decimal characteristics.
if ( lpDomainData->pszContextName && *lpDomainData->pszContextName )
{
if ( GetContext( &lpContext, lpDomain, lpDomainData->pszContextName ) )
{
// Get the formatting characters.
nRC = fnGetDecimalFmtStrings( lpContext, szThou, szDecPt,
&lPrecision );
}
else
{
MessageSend( lpDomainData->zView, "", "Domain System Error",
"Invalid Context for Currency Text",
zMSGQ_DOMAIN_ERROR, 0 );
return( zCALL_ERROR );
}
}
else
{
GetDefaultContext( &lpContext, lpDomain );
fnGetDecimalFmtStrings( lpContext, szThou, szDecPt, &lPrecision );
}
// Convert the decimal to a basic string.
if ( SysCompareDecimalToNull( (zPDECIMAL) lpAttrValue ) == 0 )
{
*((zPCHAR) lpDomainData->lpData) = 0;
strcpy_s( sz, zsizeof( sz ), "0.0" );
bWasNull = TRUE;
}
else
{
SysAssignDecimalFromDecimal( &dDecimal, (zPDECIMAL) lpAttrValue );
SysConvertDecimalToString( &dDecimal, sz, (zSHORT) lPrecision );
}
// Convert the decimal string to correct precision and international
// formatting characters.
if ( szThou[ 0 ] == 0 )
{
if ( szDecPt[ 0 ] == 0 )
fnFormatDecimalString( sz, 0, 0, lpDomain->lDecimalFormat );
else
fnFormatDecimalString( sz, 0, szDecPt, lPrecision );
}
// Convert the string decimal to the character string.
fnFormatCurrencyText( lpDomainData->zView, sz,
szThou, szDecPt, lPrecision );
// Return the formatted decimal, unless the return area is not
// large enough, in that case fill it with '*'.
if ( lpDomainData->uMaxStringLength && zstrlen( sz ) > lpDomainData->uMaxStringLength )
{
zmemset( (zPCHAR) lpDomainData->lpData, '*', lpDomainData->uMaxStringLength );
*((zPCHAR) lpDomainData->lpData + lpDomainData->uMaxStringLength) = 0;
nRC = zCALL_ERROR;
}
else
{
strcpy_s( (zPCHAR) lpDomainData->lpData, lpDomainData->uMaxStringLength, sz );
nRC = bWasNull ? -1 : 0;
}
break;
default:
*sz = lpDomainData->cType;
*(sz + 1) = 0;
strcat_s( sz, zsizeof( sz ), ", " );
strcat_s( sz, zsizeof( sz ), lpDomainData->lpViewEntity->szName );
MessageSend( lpDomainData->zView, "", "Domain System Error",
sz, zMSGQ_DOMAIN_ERROR, 0 );
return( zCALL_ERROR );
}
return( 0 );
}
// ZCheckBox - ctor
ZCheckBox::ZCheckBox( ZSubtask *pZSubtask,
CWnd *pWndParent,
ZMapAct *pzmaComposite,
zVIEW vDialog,
zSHORT nOffsetX,
zSHORT nOffsetY,
zKZWDLGXO_Ctrl_DEF *pCtrlDef ) :
CButton( ),
ZMapAct( pZSubtask, // base class ctor
pzmaComposite,
pWndParent,
this,
vDialog,
nOffsetX,
nOffsetY,
pCtrlDef,
"CheckBox" )
{
#ifdef DEBUG_ALL
TraceLineI( "In ctor for CheckBox", (zLONG) this );
#endif
if ( pCtrlDef->Subtype & zCONTROL_SIZEABLEBORDER )
Attr.Style |= WS_THICKFRAME;
else
if ( !(pCtrlDef->Subtype & zCONTROL_BORDEROFF) )
Attr.Style |= WS_BORDER;
if ( pCtrlDef->Subtype & zCONTROL_NOTABSTOP )
Attr.Style &= ~WS_TABSTOP;
else
Attr.Style |= WS_TABSTOP;
m_pzsValueOn = 0;
m_pzsValueOff = 0;
zPCHAR pch = (zPCHAR) pCtrlDef->CtrlBOI;
if ( pch == 0 ) // there is no CtrlBOI
return;
zPCHAR pchAmpersand = zstrchr( *m_pzsText, '&' );
while ( pchAmpersand )
{
pchAmpersand++;
if ( *pchAmpersand == '&' )
pchAmpersand++;
else
{
m_chQuickKey = toupper( *pchAmpersand );
break;
}
pchAmpersand = zstrchr( pchAmpersand, '&' );
}
m_pzsValueOn = new CString( pch );
pch += zstrlen( pch ) + 1;
m_pzsValueOff = new CString( pch );
BOX_SIZE = 13; // ASSERT( BOX_SIZE > 1 ); ASSERT( BOX_SIZE < 30 );
if ( pCtrlDef->Subtype & zCHECKBOX_XCHECK )
m_resID = IDB_CB_XCHECK;
else
if ( pCtrlDef->Subtype & zCHECKBOX_LED )
{
m_resID = IDB_CB_LED;
BOX_SIZE = 11;
}
else
m_resID = IDB_CB_CHECKMARK;
// load state bitmaps
m_bmpSrc = LoadBitmap( AfxGetResourceHandle( ), MAKEINTRESOURCE( m_resID ) );
ASSERT( m_bmpSrc ); // bitmap resource ID valid?
m_bLeftText = FALSE;
m_bDisabled = FALSE;
m_bChecked = FALSE;
m_lState = BOX_OFF;
m_bInRect = FALSE;
m_bSpaceDown = FALSE;
m_bMouseDown = FALSE;
m_brush = 0;
m_clr = CLR_INVALID;
m_bHasFocus = FALSE;
m_bPrepareBitmaps = TRUE;
for ( int k = 0; k < 6; k++ )
m_bitmaps[ k ] = 0;
#ifndef zREMOTE_SERVER
if ( pzmaComposite == 0 ||
(pzmaComposite->m_ulMapActFlag2 & zMAPACT_CREATE_CHILDREN) )
#endif
{
CreateZ( );
}
}
/////////////////////////////////////////////////////////////////////////////
//
// PURPOSE: This function places selected attributes in an already
// existing partition without the attributes text literals.
//
// vNewDialog - handle to the partition
// lFieldRow - offset row in the group
// lFieldCol - offset column in the group
// PartitionSize - length size for the group
//
// Return Codes:
// 0 - Everything is O.K. and the fields were placed into the
// partition
// -1 - The field widths exceeded the partitions width
//
/////////////////////////////////////////////////////////////////////////////
zOPER_EXPORT zSHORT OPERATION
ofnTZWDLGSO_AutoPaintListPart( zVIEW vSubtask,
zVIEW vUserSpec,
zVIEW vNewDialog,
zLONG lFieldRow,
zLONG lFieldCol,
zLONG PartitionSize,
zPCHAR szListType )
{
zVIEW vAutoDesWk;
zVIEW vTempStyle;
zVIEW vSubobject;
zVIEW vCtrlDef;
zLONG lListAttributeLength;
zLONG lPaintLiteralLength;
zLONG lCC;
zLONG lCL;
zCHAR szControlType[ 33 ];
zCHAR szMapEntity[ 33 ];
zCHAR szParentName[ 33 ];
zCHAR szWorkString[ 65 ];
zCHAR szLiteralString[ 65 ];
zLONG lTempInteger_0;
zSHORT RESULT;
zSHORT lFieldsPainted;
zLONG lRC;
zCHAR X_LOD_Attribute[ 16 ];
zCHAR X_LOD_Entity[ 13 ];
zCHAR X_ER_Attribute[ 15 ];
// TraceLineS( "IN", "AutoPaintListPart W4" );
// Set up variables to either I_LOD listbox or L_LOD listbox.
if ( szListType[ 0 ] == 'I' )
{
zstrcpy( X_LOD_Attribute, "I_LOD_Attribute" );
zstrcpy( X_LOD_Entity, "I_LOD_Entity" );
zstrcpy( X_ER_Attribute, "I_ER_Attribute" );
}
else
{
zstrcpy( X_LOD_Attribute, "L_LOD_Attribute" );
zstrcpy( X_LOD_Entity, "L_LOD_Entity" );
zstrcpy( X_ER_Attribute, "L_ER_Attribute" );
}
lCL = 12;
lCC = 5;
GetViewByName( &vCtrlDef, "TZADCTLD", vNewDialog, zLEVEL_TASK );
GetViewByName( &vAutoDesWk, "TZADWWKO", vNewDialog, zLEVEL_TASK );
GetStringFromAttribute( szControlType, vNewDialog, "ControlDef", "Tag" );
/* It is important to know whether the parent is a WINDOW(WDODs)
or a SECTION(RODs). */
zstrcpy( szParentName, "Window" );
/* IF we are Autodesigning a ROD, set lCL to 8 so line
skips do not take place */
lTempInteger_0 = zstrcmp( szParentName, "SECTION" );
if ( lTempInteger_0 == 0 )
{
lCL = 8;
}
/* Create a view that will point to the controls under the listbox. */
CreateViewFromViewForTask( &vSubobject, vNewDialog, 0 );
/* Set handle to the fields under the group */
SetViewToSubobject( vSubobject, "CtrlCtrl" );
/* Delete any existing fields in the listbox */
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
RESULT = DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
}
/* Create a new view that will point to the UIS_ViewObjRef entity
in the user spec object. Sometimes vUserSpec is pointing to a
recursive subobject and UI_ViewObjRef cannot be accessed. */
CreateViewFromViewForTask( &vTempStyle, vUserSpec, 0 );
ResetView( vTempStyle );
lFieldsPainted = 0;
//// Paint the fields in the Partition //////////
/* IF Attributes have been found to paint, paint them */
RESULT = SetCursorFirstEntity( vUserSpec, X_LOD_Attribute, "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
// This gets the length of the field to be painted.
lListAttributeLength = ofnTZWDLGSO_GetSizeForListAttr( vSubtask,
vUserSpec,
szListType );
if ( lListAttributeLength == 0 )
lListAttributeLength = 4;
lListAttributeLength = lListAttributeLength * lCC;
if ( lListAttributeLength > 100 )
lListAttributeLength = 100;
if ( lListAttributeLength < 25 )
lListAttributeLength = 25;
/* If there isn't a paint literal then use the entity name
as the paint literal */
GetStringFromAttribute( szLiteralString, vUserSpec,
X_ER_Attribute, "ListPaintLit" );
if ( szLiteralString[ 0 ] == 0 )
GetStringFromAttribute( szLiteralString, vUserSpec,
X_ER_Attribute, "PromptPaintLit" );
lPaintLiteralLength = zstrlen( szLiteralString );
if ( szLiteralString[ 0 ] == 0 )
{
GetStringFromAttribute( szLiteralString, vUserSpec,
X_ER_Attribute, "Name" );
AddSpacesToString( szLiteralString );
lPaintLiteralLength = zstrlen( szLiteralString ) + 1;
}
lPaintLiteralLength = lPaintLiteralLength * lCC;
if ( lPaintLiteralLength > 100 )
lPaintLiteralLength = 100;
if ( lPaintLiteralLength < 25 )
lPaintLiteralLength = 25;
/* Do not continue to add fields into the partition if
the field sizes exceed the size of the partition */
/* If the field attribute length is greater than the text
literal length, then add the field attribute length
to lFieldCol. */
if ( lPaintLiteralLength < lListAttributeLength )
{
/* If the length of lFieldCol is greater than the
partition size, then delete all the fields that have
been added and give a message to the user. */
if ( lFieldCol + lListAttributeLength > PartitionSize )
{
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
RESULT = SetCursorNextEntity( vSubobject, "Control", "" );
}
DropView( vSubobject );
MessageSend( vUserSpec, "AD10302", "Autodesigner",
"Partition too small( width )",
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
return( -1 );
}
}
else
{
/* If the text literal length is greater than the field
attribute length, then add the text literal length
to lFieldCol. */
/* If the length of lFieldCol is greater than the
partition size, then delete all the fields that have
been added and give a message to the user. */
if ( lFieldCol + lPaintLiteralLength > PartitionSize )
{
RESULT = SetCursorFirstEntity( vSubobject, "Control", "" );
while ( RESULT > zCURSOR_UNCHANGED )
{
DeleteEntity( vSubobject, "Control", zREPOS_NEXT );
RESULT = SetCursorNextEntity( vSubobject, "Control", "" );
}
DropView( vSubobject );
MessageSend( vUserSpec, "AD10303", "Autodesigner",
"Partition too small( width )",
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
return( -1 );
}
}
/* Create the partition's fields */
CreateMetaEntity( vSubtask, vSubobject, "Control", zPOS_AFTER );
SetAttributeFromString( vSubobject, "Control", "Text", szLiteralString );
if ( zstrcmp( szControlType, "ListBox" ) == 0 )
{
SetCursorFirstEntityByString( vCtrlDef, "ControlDef",
"Tag", "ListBoxCtl", "" );
IncludeSubobjectFromSubobject( vSubobject, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
}
else
{
SetCursorFirstEntityByString( vCtrlDef, "ControlDef",
"Tag", "Text", "" );
IncludeSubobjectFromSubobject( vSubobject, "ControlDef",
vCtrlDef, "ControlDef", zPOS_AFTER );
}
// Set the tag
ofnTZWDLGSO_AssignTag( vSubtask, vNewDialog, vSubobject, "ListCtrl" );
/* GetStringFromAttribute( szTag, vUserSpec, X_ER_Attribute, "Name" );
szTag[ 30 ] = 0;
lFieldsPainted = lFieldsPainted + 1;
zltoa( lFieldsPainted, szWork );
zstrcat( szTag, szWork );
SetAttributeFromString( vSubobject, "Control", "Tag", szTag );
*/
SetAttributeFromInteger( vSubobject, "Control", "SZDLG_X",
lListAttributeLength );
SetAttributeFromInteger( vSubobject, "Control", "SZDLG_Y", lCL );
/* If the domain is an integer or a long, then right justify. */
/*
IF vUserSpec.L_Domain.DerivedDataType = 'I' OR
vUserSpec.L_Domain.DerivedDataType = 'L' OR
vUserSpec.L_Domain.DerivedDataType = 'M'
vNewDialog.FLAGFLD.RJUST = 'Y'
END
*/
GetStringFromAttribute( szMapEntity, vUserSpec, "LOD_Entity", "Name" );
GetStringFromAttribute( szWorkString, vUserSpec, X_LOD_Entity, "Name" );
/* If this LISTATTRIB is from a different ENTITY than the
current ENTITY, then make sure the value gets mapped. */
lRC = zstrcmp( szWorkString, "" );
if ( lRC != 0 )
{
lRC = zstrcmp( szWorkString, szMapEntity );
if ( lRC == 0 )
{
zstrcpy( szMapEntity, szWorkString );
}
}
/* setting the group and field's ENAME and ANAME */
CreateMetaEntity( vSubtask, vSubobject, "CtrlMap", zPOS_AFTER );
/* set the partitions OI name */
if ( szListType[ 0 ] == 'I' )
IncludeSubobjectFromSubobject( vSubobject, "CtrlMapView",
vUserSpec, "ListViewObjRef", zPOS_AFTER );
else
IncludeSubobjectFromSubobject( vSubobject, "CtrlMapView",
vTempStyle, "UIS_ViewObjRef", zPOS_AFTER );
IncludeSubobjectFromSubobject( vSubobject, "CtrlMapLOD_Attribute",
vUserSpec, X_LOD_Attribute, zPOS_AFTER );
/* lFieldRow should always stay the same */
SetAttributeFromInteger( vSubobject, "Control", "PSDLG_X", lFieldCol );
SetAttributeFromInteger( vSubobject, "Control", "PSDLG_Y", lFieldRow );
/* If the field length is longer than the paint literal,
then position the next field by using the field length,
otherwise position the next field by using the paint
literal length */
if ( lPaintLiteralLength < lListAttributeLength )
{
lFieldCol = lFieldCol + lListAttributeLength + lCC;
}
else
{
lFieldCol = lFieldCol + lPaintLiteralLength + lCC;
}
RESULT = SetCursorNextEntity( vUserSpec, X_LOD_Attribute, "" );
}
DropView( vSubobject );
DropView( vTempStyle );
// TraceLineS("END", "AutoPaintListPart W4" );
return( 0 );
}
/////////////////////////////////////////////////////////////////////////////
//
// CONSTRUCTOR: Tab sub-control (to group controls at the tab level)
//
/////////////////////////////////////////////////////////////////////////////
// ctor
TZNotePage::TZNotePage( TZPainterWindow *pPainterWindow,
TZPainterCtrl *pCtrlParent,
CWnd *pWndParent,
CRect& rect,
zVIEW vCtrl,
zLONG lType,
zBOOL bPlaceHolder,
zLONG lZKey,
zLONG lTabStopNbr,
zLONG lCtrlID,
zPCHAR pchTag,
zPCHAR pchText ) :
CWnd( ),
TZPainterCtrl( pPainterWindow, pCtrlParent, pWndParent,
rect, vCtrl, this, pchTag, pchText,
lType, bPlaceHolder, lZKey, lTabStopNbr, lCtrlID )
{
#ifdef DEBUG_ALL
TraceLineS( "TZNotePage::ctor ", m_csTag );
#endif
m_pNext = 0;
m_uVisible = 0x0100;
m_lSubtype = 0;
m_pZNoteBook = DYNAMIC_DOWNCAST( TZNoteBook, pWndParent );
if ( m_pZNoteBook == 0 )
return;
zPCHAR pch;
zLONG lTabNbr;
zLONG lLth;
if ( vCtrl )
{
GetAddrForAttribute( &pch, vCtrl, szlControl, szlText );
lLth = zstrlen( pch ) + 1;
m_pchCaption = new char[ lLth ];
strcpy_s( m_pchCaption, lLth, pch );
GetIntegerFromAttribute( &lTabNbr, vCtrl, szlControl, szlType );
if ( lTabNbr == 0 )
{
zVIEW vTemp;
m_pZNoteBook->m_nTabNbrMax++;
CreateViewFromViewForTask( &vTemp, vCtrl, pPainterWindow->m_vDialog );
ResetViewFromSubobject( vTemp );
while ( SetCursorFirstEntityByInteger( vTemp, szlCtrlCtrl, szlType,
m_pZNoteBook->m_nTabNbrMax, 0 ) == zCURSOR_SET )
{
m_pZNoteBook->m_nTabNbrMax++;
}
SetAttributeFromInteger( vCtrl, szlControl, szlType, m_pZNoteBook->m_nTabNbrMax );
m_lSubtype = m_pZNoteBook->m_nTabNbrMax;
DropView( vTemp );
}
else
{
if ( lTabNbr > m_pZNoteBook->m_nTabNbrMax )
m_pZNoteBook->m_nTabNbrMax = (zSHORT) lTabNbr;
m_lSubtype = m_pZNoteBook->m_nTabNbrMax;
}
if ( MiGetUpdateForView( vCtrl ) > 0 )
{
SetAttributeFromAttribute( vCtrl, szlControl, szlSyncKey, vCtrl, szlControl, szlType );
}
}
else
{
m_pZNoteBook->m_nTabNbrMax++;
m_lSubtype = m_pZNoteBook->m_nTabNbrMax;
lTabNbr = m_pZNoteBook->m_nTabNbrMax;
lLth = zstrlen( pchText ) + 1;
m_pchCaption = new char[ lLth ];
strcpy_s( m_pchCaption, lLth, pchText );
}
// TraceRect( "TabCtl rect ", rect );
// TraceLineI( " Attr.X ", Attr.X );
// TraceLineI( " Attr.Y ", Attr.Y );
// TraceLineI( " Attr.W ", Attr.W );
// TraceLineI( " Attr.H ", Attr.H );
// Build sub-controls on demand (only when visible or selectable).
m_bBuildOnDemand = TRUE;
if ( m_pZNoteBook->m_pZNotePage )
{
m_nTabIdx = 1;
TZNotePage *pCurrNotePage = m_pZNoteBook->m_pZNotePage;
while ( pCurrNotePage->m_pNext )
{
m_nTabIdx++;
pCurrNotePage = pCurrNotePage->m_pNext;
}
pCurrNotePage->m_pNext = this;
}
else
{
m_nTabIdx = 0;
m_pZNoteBook->m_pZNotePage = this;
}
// m_nTabNbr = (zSHORT) lTabNbr;
m_nTabNbr = m_nTabIdx + 1;
m_pZNoteBook->m_nPageCnt++;
TC_ITEM TabCtrlItem;
TabCtrlItem.mask = TCIF_TEXT;
TabCtrlItem.pszText = m_pchCaption;
#ifdef DEBUG_ALL
TraceLineS( "Adding TabCtrlItem: ", m_pchCaption );
#endif
m_pZNoteBook->InsertItem( m_nTabIdx, &TabCtrlItem );
//?Attr.StyleEx = WS_EX_TRANSPARENT;
//?Attr.Style &= ~(WS_CLIPSIBLINGS | WS_CLIPCHILDREN);
CreateZ( );
}
//
// OPERATION: LoadXPG
//
// DESCRIPTION: LoadXPG Gets the executable directory from the TaskLPLR.
// It then creates a file name from which to load the pared instance file.
// If the load is successful then the view is names in the interp
// subtask as XPG.
//
zOPER_EXPORT zSHORT OPERATION
LoadXPG( zVIEW lpInterpSubtask, // interpretor subtask
zVIEW vSubtask, // application subtask
zPCHAR szSrcDLLName, // source dllname
zCPCHAR cpcGenLang )
{
zVIEW vViewObject; // task view
zCHAR szExecDir[ zMAX_FILESPEC_LTH + 1 ]; // dir string
zCHAR szMessage[ zMAX_MESSAGE_LTH + 1 ];
zLONG lParserVersion = 0;
zSHORT nLth; // string length
zSHORT nRC;
// First check to see if it already exists.
GetViewByName( &g_vXPGView, "XPG", lpInterpSubtask, zLEVEL_SUBTASK );
if ( g_vXPGView != 0 )
return( 0 );
// get a view to the Task LPLR
if ( GetViewByName( &vViewObject, "TaskLPLR", vSubtask, zLEVEL_TASK ) != zLEVEL_TASK )
{
return( -1 );
}
// get the exec directory
GetStringFromAttribute( szExecDir, zsizeof( szExecDir ), vViewObject, "LPLR", "ExecDir" );
// be sure it was terminated with a '\'
nLth = (zSHORT) zstrlen( szExecDir );
if ( szExecDir[ nLth ] != '\\' )
{
szExecDir[ nLth ] = '\\';
szExecDir[ nLth + 1 ] = 0;
}
// concat the name. and the .XPG extention
strcat_s( szExecDir, zsizeof( szExecDir ), szSrcDLLName );
if ( cpcGenLang[ 0 ] == 'J' )
strcat_s( szExecDir, zsizeof( szExecDir ), ".XPJ" );
else
strcat_s( szExecDir, zsizeof( szExecDir ), ".XPG" );
// activate the file
nRC = ActivateOI_FromFile( &g_vXPGView,
"TZVSPOOO",
lpInterpSubtask,
szExecDir,
zSINGLE | zNOI_OKAY |
zIGNORE_ATTRIB_ERRORS );
if ( nRC != 0 ) // failed
{
strcpy_s( szMessage, zsizeof( szMessage ), "Source VML :" );
strcat_s( szMessage, zsizeof( szMessage ), szSrcDLLName );
strcat_s( szMessage, zsizeof( szMessage ), " must be parsed prior to execution" );
MessageSend( lpInterpSubtask, "VM03002", "VML Interpretor",
szMessage,
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
TraceLineS( "Could Not Load ", szExecDir );
return( -1 );
}
// do the Parser Version Compatibility Check
#define PARSER_VERSION_REQUIRED 1
nRC = GetIntegerFromAttribute( &lParserVersion, g_vXPGView,
"VML_XSource", "ParserVersion" );
if ( nRC != 0 || lParserVersion < PARSER_VERSION_REQUIRED )
{
// the XPG is too old, and not compatible with the current
// interpreter.
strcpy_s( szMessage, zsizeof( szMessage ), "Source VML :" );
strcat_s( szMessage, zsizeof( szMessage ), szSrcDLLName );
strcat_s( szMessage, zsizeof( szMessage ),
" is outdated and must be re-parsed prior to execution" );
MessageSend( lpInterpSubtask, "VM03002", "VML Interpretor",
szMessage,
zMSGQ_OBJECT_CONSTRAINT_ERROR, zBEEP );
TraceLineS( "Program File Outdated : ", szExecDir );
return( -1 );
}
// name the view to the interpretor subtask
SetNameForView( g_vXPGView, "XPG", lpInterpSubtask, zLEVEL_SUBTASK );
return( 0 );
}