Пример #1
0
void CGroundLine::Draw()
{
	if ( !m_pMaterial || m_nPoints < 2 )
		return;
	if ( !IsVisible() )
		return;
	
	float flAlpha = m_Alpha;
	if( g_pClientMode == ClientModeCommander() )
	{
		flAlpha = 1; // draw bright..
	}

	CBeamSegDraw beamDraw;
	beamDraw.Start( m_nPoints, m_pMaterial );
	
		for( unsigned int i=0; i < m_nPoints; i++ )
		{
			float t = (float)i / (m_nPoints - 1);

			CBeamSeg seg;
			seg.m_vPos = m_Points[i];
			VectorLerp( m_vStartColor, m_vEndColor, t, seg.m_vColor );
			seg.m_flTexCoord = 0;
			seg.m_flWidth = m_LineWidth;
			seg.m_flAlpha = m_Alpha;

			beamDraw.NextSeg( &seg );
		}
	
	beamDraw.End();
}
Пример #2
0
int C_Hairball::DrawModel( int flags )
{
	if ( !m_pMaterial )
		return 0;

	CMatRenderContextPtr pRenderContext( g_pMaterialSystem );
	for ( int iHair=0; iHair < m_nHairs; iHair++ )
	{
		CSimplePhysics::CNode *pBase = &m_Nodes[iHair * m_nNodesPerHair];
		
		CBeamSegDraw beamDraw;
		beamDraw.Start( pRenderContext, m_nNodesPerHair-1, m_pMaterial );

		for ( int i=0; i < m_nNodesPerHair; i++ )
		{
			BeamSeg_t seg;
			seg.m_vPos = pBase[i].m_vPredicted;
			seg.m_vColor.Init( 0, 0, 0 );
			seg.m_flTexCoord = 0;
			static float flHairWidth = 1;
			seg.m_flWidth = flHairWidth;
			seg.m_flAlpha = 0;

			beamDraw.NextSeg( &seg );
		}
		
		beamDraw.End();
	}

	return 1;
}
int C_WalkerStrider::DrawModel( int flags )
{
	BaseClass::DrawModel( flags );

	IMaterial *pMaterial = materials->FindMaterial( STRIDER_BEAM_MATERIAL, TEXTURE_GROUP_CLIENT_EFFECTS );
	// hogsy start
	CMatRenderContextPtr pRenderContext(materials);
	// hogsy end

	Vector vGunPos;
	QAngle vAngles;
	BaseClass::GetAttachment( LookupAttachment( "BigGun" ), vGunPos, vAngles );

	// Draw our beam effects.
	FOR_EACH_LL( m_BeamEffects, i )
	{
		CStriderBeamEffect *pEff = &m_BeamEffects[i];

		float flAlpha = (gpGlobals->curtime - pEff->m_flStartTime) / STRIDER_BEAM_LIFETIME;
		flAlpha = 1.0 - clamp( flAlpha, 0, 1 );

		CBeamSegDraw segDraw;
		// hogsy start
		segDraw.Start(pRenderContext, 2, pMaterial);

		BeamSeg_t seg;
		// hogsy end
		seg.m_vColor.Init( 1, 0, 0 );
		seg.m_flWidth = STRIDER_BEAM_WIDTH;
		seg.m_flAlpha = flAlpha;

		seg.m_flTexCoord = 0;
		seg.m_vPos = vGunPos;
		segDraw.NextSeg( &seg );

		seg.m_flTexCoord = 1;
		seg.m_vPos = pEff->m_vHitPos;
		segDraw.NextSeg( &seg );
		
		segDraw.End();
	}
Пример #4
0
//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
int CSpriteTrail::DrawModel( int flags )
{
	VPROF_BUDGET( "CSpriteTrail::DrawModel", VPROF_BUDGETGROUP_PARTICLE_RENDERING );
	
	// Must have at least one point
	if ( m_nStepCount < 1 )
		return 1;

	//See if we should draw
	if ( !IsVisible() || ( m_bReadyToDraw == false ) )
		return 0;

	CEngineSprite *pSprite = Draw_SetSpriteTexture( GetModel(), m_flFrame, GetRenderMode() );
	if ( pSprite == NULL )
		return 0;

	// Specify all the segments.
	CMatRenderContextPtr pRenderContext( g_pMaterialSystem );
	CBeamSegDraw segDraw;
	segDraw.Start( pRenderContext, m_nStepCount + 1, pSprite->GetMaterial() );
	
	// Setup the first point, always emanating from the attachment point
	TrailPoint_t *pLast = GetTrailPoint( m_nStepCount-1 );
	TrailPoint_t currentPoint;
	currentPoint.m_flDieTime = gpGlobals->curtime + m_flLifeTime;
	ComputeScreenPosition( &currentPoint.m_vecScreenPos );
	currentPoint.m_flTexCoord = pLast->m_flTexCoord + currentPoint.m_vecScreenPos.DistTo(pLast->m_vecScreenPos) * m_flTextureRes;
	currentPoint.m_flWidthVariance = 0.0f;

#if SCREEN_SPACE_TRAILS
	VMatrix	viewMatrix;
	materials->GetMatrix( MATERIAL_VIEW, &viewMatrix );
	viewMatrix = viewMatrix.InverseTR();
#endif

	TrailPoint_t *pPrevPoint = NULL;
	float flTailAlphaDist = m_flMinFadeLength;
	for ( int i = 0; i <= m_nStepCount; ++i )
	{
		// This makes it so that we're always drawing to the current location
		TrailPoint_t *pPoint = (i != m_nStepCount) ? GetTrailPoint(i) : &currentPoint;

		float flLifePerc = (pPoint->m_flDieTime - gpGlobals->curtime) / m_flLifeTime;
		flLifePerc = clamp( flLifePerc, 0.0f, 1.0f );

		BeamSeg_t curSeg;
		curSeg.m_vColor.x = (float) m_clrRender->r / 255.0f;
		curSeg.m_vColor.y = (float) m_clrRender->g / 255.0f;
		curSeg.m_vColor.z = (float) m_clrRender->b / 255.0f;

		float flAlphaFade = flLifePerc;
		if ( flTailAlphaDist > 0.0f )
		{
			if ( pPrevPoint )
			{
				float flDist = pPoint->m_vecScreenPos.DistTo( pPrevPoint->m_vecScreenPos );
				flTailAlphaDist -= flDist;
			}

			if ( flTailAlphaDist > 0.0f )
			{
				float flTailFade = Lerp( (m_flMinFadeLength - flTailAlphaDist) / m_flMinFadeLength, 0.0f, 1.0f );
				if ( flTailFade < flAlphaFade )
				{
					flAlphaFade = flTailFade;
				}
			}
		}
		curSeg.m_flAlpha  = ( (float) GetRenderBrightness() / 255.0f ) * flAlphaFade;

#if SCREEN_SPACE_TRAILS
		curSeg.m_vPos = viewMatrix * pPoint->m_vecScreenPos;
#else
		curSeg.m_vPos = pPoint->m_vecScreenPos;
#endif

		if ( m_flEndWidth >= 0.0f )
		{
			curSeg.m_flWidth = Lerp( flLifePerc, m_flEndWidth.Get(), m_flStartWidth.Get() );
		}
		else
		{
			curSeg.m_flWidth = m_flStartWidth.Get();
		}
		curSeg.m_flWidth += pPoint->m_flWidthVariance;
		if ( curSeg.m_flWidth < 0.0f )
		{
			curSeg.m_flWidth = 0.0f;
		}

		curSeg.m_flTexCoord = pPoint->m_flTexCoord;

		segDraw.NextSeg( &curSeg );

		// See if we're done with this bad boy
		if ( pPoint->m_flDieTime <= gpGlobals->curtime )
		{
			// Push this back onto the top for use
			++m_nFirstStep;
			--i;
			--m_nStepCount;
		}

		pPrevPoint = pPoint;
	}

	segDraw.End();

	return 1;
}
//-----------------------------------------------------------------------------
// Purpose: 
// Input  : fTimeDelta - 
//-----------------------------------------------------------------------------
void C_ExtinguisherJet::Update( float fTimeDelta )
{
	if ( m_bEmit == false )
		return;

	C_BasePlayer *player = C_BasePlayer::GetLocalPlayer();

	if ( m_bUseMuzzlePoint )
	{
		C_BaseViewModel *vm = player ? player->GetViewModel( 0 ) : NULL;

		if ( vm )
		{
			int iAttachment = vm->LookupAttachment( "muzzle" );
			Vector origin;
			QAngle angles;
			vm->GetAttachment( iAttachment, origin, angles );

			Assert( !GetMoveParent() );
			SetLocalOrigin( origin );
			SetLocalAngles( angles );
		}
	}

	trace_t	tr;
	Vector	shotDir, vRight, vUp;

	AngleVectors( GetAbsAngles(), &shotDir, &vRight, &vUp );
	
	//FIXME: Muzzle point is incorrect on the model!
	if ( m_bUseMuzzlePoint )
	{
		shotDir.Negate();
	}

	Vector	endPoint = GetAbsOrigin() + ( shotDir * 150.0f );
	
	UTIL_TraceLine( GetAbsOrigin(), endPoint, MASK_SHOT, NULL, COLLISION_GROUP_NONE, &tr );

	bool	hitWall = ( tr.fraction < 1.0f );

	//Add normal jet
	if ( m_pEmitter.IsValid() )
	{
		SimpleParticle	*pParticle;

		m_pEmitter->SetSortOrigin( GetAbsOrigin() );
	
		float tempDelta = fTimeDelta;
		
		//FIXME: All particles need to be within this loop
		while( m_ParticleSpawn.NextEvent( tempDelta ) )
		{
			pParticle = (SimpleParticle *) m_pEmitter->AddParticle( sizeof(SimpleParticle), m_MaterialHandle, GetAbsOrigin() );

			if ( pParticle )
			{
				pParticle->m_flDieTime	= 0.2f;
				pParticle->m_flLifetime	= 0.0f;
				
				pParticle->m_flRoll		= random->RandomInt( 0, 360 );
				pParticle->m_flRollDelta= random->RandomFloat( -4.0f, 4.0f );
				
				pParticle->m_uchStartSize	= 1;
				pParticle->m_uchEndSize		= random->RandomInt( 32, 48 );
				pParticle->m_uchStartAlpha	= random->RandomInt( 128, 164 );
				pParticle->m_uchEndAlpha	= 0;
				
				int	cScale = random->RandomInt( 192, 255 );
				pParticle->m_uchColor[0]	= cScale;
				pParticle->m_uchColor[1]	= cScale;
				pParticle->m_uchColor[2]	= cScale;

				Vector	dir;
				QAngle  ofsAngles;

				ofsAngles.Random( -8.0f, 8.0f );
				ofsAngles += GetAbsAngles();

				AngleVectors( ofsAngles, &dir );

				if ( m_bUseMuzzlePoint )
				{
					dir.Negate();
				}

				pParticle->m_vecVelocity	= dir * random->RandomInt( 400, 800 );
			}

			//Add muzzle effect
			pParticle = (SimpleParticle *) m_pEmitter->AddParticle( sizeof(SimpleParticle), m_MaterialHandle, GetAbsOrigin() );

			if ( pParticle )
			{
				pParticle->m_flDieTime	= 0.1f;
				pParticle->m_flLifetime	= 0.0f;
				
				pParticle->m_flRoll		= random->RandomInt( 0, 360 );
				pParticle->m_flRollDelta= random->RandomFloat( -4.0f, 4.0f );
				
				pParticle->m_uchStartSize	= 1;
				pParticle->m_uchEndSize		= random->RandomInt( 8, 16 );
				pParticle->m_uchStartAlpha	= random->RandomInt( 128, 255 );
				pParticle->m_uchEndAlpha	= 0;
				
				int	cScale = random->RandomInt( 192, 255 );
				pParticle->m_uchColor[0]	= cScale;
				pParticle->m_uchColor[1]	= cScale;
				pParticle->m_uchColor[2]	= cScale;

				Vector	dir;
				QAngle  ofsAngles;

				ofsAngles.Random( -64.0f, 64.0f );
				ofsAngles += GetAbsAngles();

				AngleVectors( ofsAngles, &dir );

				if ( m_bUseMuzzlePoint )
				{
					dir.Negate();
				}

				pParticle->m_vecVelocity	= dir * random->RandomInt( 32, 64 );
			}

			//Add a wall effect if needed
			if ( hitWall )
			{
				AddExtinguisherDecal( tr );

				Vector	offDir;

				offDir.Random( -16.0f, 16.0f );

				pParticle = (SimpleParticle *) m_pEmitter->AddParticle( sizeof(SimpleParticle), m_MaterialHandle, ( tr.endpos + ( tr.plane.normal * 8.0f ) ) + offDir );

				if ( pParticle )
				{
					pParticle->m_flDieTime	= 0.4f;
					pParticle->m_flLifetime	= 0.0f;
					
					pParticle->m_flRoll		= random->RandomInt( 0, 360 );
					pParticle->m_flRollDelta= random->RandomFloat( -2.0f, 2.0f );
					
					pParticle->m_uchStartSize	= random->RandomInt( 8, 16 );
					pParticle->m_uchEndSize		= random->RandomInt( 24, 32 );
					pParticle->m_uchStartAlpha	= random->RandomInt( 64, 128 );
					pParticle->m_uchEndAlpha	= 0;
					
					int	cScale = random->RandomInt( 192, 255 );
					pParticle->m_uchColor[0]	= cScale;
					pParticle->m_uchColor[1]	= cScale;
					pParticle->m_uchColor[2]	= cScale;

					Vector	rDir;

					rDir = tr.plane.normal;
					rDir[0] += random->RandomFloat( -0.9f, 0.9f );
					rDir[1] += random->RandomFloat( -0.9f, 0.9f );
					rDir[2] += random->RandomFloat( -0.9f, 0.9f );

					pParticle->m_vecVelocity = rDir * random->RandomInt( 32, 64 );
				}			
			}

			//Add small ember-like particles
			if ( random->RandomInt( 0, 1 ) == 0 )
			{
				m_pEmberEmitter->SetSortOrigin( GetAbsOrigin() );

				pParticle = (SimpleParticle *) m_pEmberEmitter->AddParticle( sizeof(SimpleParticle), m_pEmberEmitter->GetPMaterial( "particle/particle_smokegrenade" ), GetAbsOrigin() );
				
				assert(pParticle);

				if ( pParticle )
				{
					pParticle->m_flLifetime		= 0.0f;
					pParticle->m_flDieTime		= 1.0f;

					pParticle->m_flRoll			= 0;
					pParticle->m_flRollDelta	= 0;

					pParticle->m_uchColor[0]	= 255;
					pParticle->m_uchColor[1]	= 255;
					pParticle->m_uchColor[2]	= 255;
					pParticle->m_uchStartAlpha	= 255;
					pParticle->m_uchEndAlpha	= 0;
					pParticle->m_uchStartSize	= 1;
					pParticle->m_uchEndSize		= 0;
					
					Vector	dir;
					QAngle  ofsAngles;

					ofsAngles.Random( -8.0f, 8.0f );
					ofsAngles += GetAbsAngles();

					AngleVectors( ofsAngles, &dir );

					if ( m_bUseMuzzlePoint )
					{
						dir.Negate();
					}

					pParticle->m_vecVelocity	= dir * random->RandomInt( 400, 800 );
				}
			}
		}
	}

	// Inner beam

	CBeamSegDraw	beamDraw;
	CBeamSeg		seg;
	const int		numPoints = 4;
	Vector			beamPoints[numPoints];

	beamPoints[0] = GetAbsOrigin();

	// Create our beam points
	int i;
	for ( i = 0; i < numPoints; i++ )
	{
		beamPoints[i] = GetAbsOrigin() + ( shotDir * (32*i*i) );

		beamPoints[i] += vRight * sin( gpGlobals->curtime * 4.0f ) * (2.0f*i);
		beamPoints[i] += vUp * sin( gpGlobals->curtime * 8.0f ) * (1.0f*i);
		beamPoints[i] += shotDir * sin( gpGlobals->curtime * (16.0f*i) ) * (1.0f*i);
	}

	IMaterial *pMat = materials->FindMaterial( "particle/particle_smokegrenade", NULL );

	beamDraw.Start( numPoints, pMat );

	//Setup and draw those points	
	for( i = 0; i < numPoints; i++ )
	{
		float	t = (float) i / (numPoints - 1);
		float	color = 1.0f * (1.0f - t);

		seg.m_vColor		= Vector( color, color, color );
		seg.m_vPos			= beamPoints[i];
		seg.m_flTexCoord	= (float)i/(float)(numPoints-1) - ((gpGlobals->curtime - (int)gpGlobals->curtime) * 4.0f );
		seg.m_flWidth		= 4.0f + ( (64.0f*t) * (fabs( sin( gpGlobals->curtime * 16.0f ) )) );
		seg.m_flAlpha		= color;

		beamDraw.NextSeg( &seg );
	}
	
	beamDraw.End();
}
Пример #6
0
void AddCoolLine( const Vector &v1, const Vector &v2, unsigned long iExtraFadeOffset, bool bNegateMovementDir )
{
	float flLineSectionLength = 3;		// How many inches each line travels. Each line is a solid color and alpha.
	int nLineSectionsToFade = 2;	// How many lines to fade from translucent to opaque.
	int baseColor[3] = { 216, 183, 67 }; // gold
	float flTimeBetweenUpdates = 0.2f;
	unsigned long iLineFadeOffset = iExtraFadeOffset + (int)(gpGlobals->curtime / flTimeBetweenUpdates);
	if ( bNegateMovementDir )
		iLineFadeOffset = 0xFFFFFFFF - iLineFadeOffset;

	
	Vector vDelta = v2 - v1;
	float flLineLen = vDelta.Length();
	vDelta /= flLineLen;

	int nMaxLines = (int)(flLineLen / flLineSectionLength) + 1;


	static IMaterial *pWireframeMaterial = NULL;
	if ( !pWireframeMaterial )
		pWireframeMaterial = materials->FindMaterial( "debug/debugwireframevertexcolor", TEXTURE_GROUP_OTHER );

	static IMaterial *pBeamMaterial = NULL;
	if ( !pBeamMaterial )
		pBeamMaterial = materials->FindMaterial( "effects/laser1", TEXTURE_GROUP_OTHER );

	CMatRenderContextPtr pRenderContext( materials );


	// Draw the solid underlying lines.
	IMesh* pMesh = pRenderContext->GetDynamicMesh( true, NULL, NULL, pWireframeMaterial );
	CMeshBuilder meshBuilder;
	meshBuilder.Begin( pMesh, MATERIAL_LINES, 1 );

	meshBuilder.Position3fv( v1.Base() );
	meshBuilder.Color4ub( baseColor[0], baseColor[1], baseColor[2], 255 );
	meshBuilder.AdvanceVertex();
	
	meshBuilder.Position3fv( v2.Base() );
	meshBuilder.Color4ub( baseColor[0], baseColor[1], baseColor[2], 255 );
	meshBuilder.AdvanceVertex();

	meshBuilder.End( false, true );


	// Draw the additive beams.
	float flCurDist = 0;
	Vector vStartPos = v1;
	for ( int i=0; i < nMaxLines; i++ )
	{
		float flEndDist = MIN( flCurDist + flLineSectionLength, flLineLen );
		Vector vEndPos = v1 + vDelta * flEndDist;
		
		int alpha;
		int iFadeAmt = (iLineFadeOffset+i) % (nLineSectionsToFade * 2);
		if ( iFadeAmt < nLineSectionsToFade )
			alpha = (iFadeAmt * 255) / nLineSectionsToFade;
		else
			alpha = (255 * (nLineSectionsToFade - (iFadeAmt - nLineSectionsToFade))) / nLineSectionsToFade;

		float flAlpha = Bias( alpha / 255.0f, 0.6 );

		
		CBeamSegDraw beamDraw;
		beamDraw.Start( pRenderContext, 2, pBeamMaterial );
		BeamSeg_t beamSeg;
		beamSeg.SetColor( baseColor[0] * flAlpha / 255.0f, baseColor[1] * flAlpha / 255.0f, baseColor[2] * flAlpha / 255.0f, 1.0f );
		beamSeg.m_flTexCoord = 0;
		beamSeg.m_flWidth = 6;

		beamSeg.m_vPos = vStartPos;
		beamDraw.NextSeg( &beamSeg );

		beamSeg.m_vPos = vEndPos;
		beamDraw.NextSeg( &beamSeg );

		beamDraw.End();

		flCurDist = flEndDist;
		vStartPos = vEndPos;
	}
}
Пример #7
0
//-----------------------------------------------------------------------------
// Purpose: 
// Input  : noise_divisions - 
//			*prgNoise - 
//			*spritemodel - 
//			frame - 
//			rendermode - 
//			source - 
//			delta - 
//			flags - 
//			*color - 
//			fadescale - 
//-----------------------------------------------------------------------------
void DrawSegs( int noise_divisions, float *prgNoise, const model_t* spritemodel,
				float frame, int rendermode, const Vector& source, const Vector& delta, 
				float startWidth, float endWidth, float scale, float freq, float speed, int segments,
				int flags, float* color, float fadeLength, float flHDRColorScale )
{
	int				i, noiseIndex, noiseStep;
	float			div, length, fraction, factor, vLast, vStep, brightness;
	
	Assert( fadeLength >= 0.0f );
	CEngineSprite *pSprite = Draw_SetSpriteTexture( spritemodel, frame, rendermode );
	if ( !pSprite )
		return;

	if ( segments < 2 )
		return;

	IMaterial *pMaterial = pSprite->GetMaterial( (RenderMode_t)rendermode );
	if( pMaterial )
	{
		static unsigned int nHDRColorScaleCache = 0;
		IMaterialVar *pHDRColorScaleVar = pMaterial->FindVarFast( "$hdrcolorscale", &nHDRColorScaleCache );
		if( pHDRColorScaleVar )
		{
			pHDRColorScaleVar->SetFloatValue( flHDRColorScale );
		}
	}
	
	length = VectorLength( delta );
	float flMaxWidth = MAX(startWidth, endWidth) * 0.5f;
	div = 1.0 / (segments-1);

	if ( length*div < flMaxWidth * 1.414 )
	{
		// Here, we have too many segments; we could get overlap... so lets have less segments
		segments = (int)(length / (flMaxWidth * 1.414)) + 1;
		if ( segments < 2 )
		{
			segments = 2;
		}
	}

	if ( segments > noise_divisions )		// UNDONE: Allow more segments?
	{
		segments = noise_divisions;
	}

	div = 1.0 / (segments-1);
	length *= 0.01;

	// UNDONE: Expose texture length scale factor to control "fuzziness"

	if ( flags & FBEAM_NOTILE )
	{
		// Don't tile
		vStep = div;
	}
	else
	{
		// Texture length texels per space pixel
		vStep = length*div;	
	}
	
	// UNDONE: Expose this paramter as well(3.5)?  Texture scroll rate along beam
	vLast = fmod(freq*speed,1);	// Scroll speed 3.5 -- initial texture position, scrolls 3.5/sec (1.0 is entire texture)

	if ( flags & FBEAM_SINENOISE )
	{
		if ( segments < 16 )
		{
			segments = 16;
			div = 1.0 / (segments-1);
		}
		scale *= 100;
		length = segments * (1.0/10);
	}
	else
	{
		scale *= length;
	}

	// Iterator to resample noise waveform (it needs to be generated in powers of 2)
	noiseStep = (int)((float)(noise_divisions-1) * div * 65536.0f);
	noiseIndex = 0;
	
	if ( flags & FBEAM_SINENOISE )
	{
		noiseIndex = 0;
	}

	brightness = 1.0;
	if ( flags & FBEAM_SHADEIN )
	{
		brightness = 0;
	}

	// What fraction of beam should be faded
	Assert( fadeLength >= 0.0f );
	float fadeFraction = fadeLength/ delta.Length();
	
	// BUGBUG: This code generates NANs when fadeFraction is zero! REVIST!
	fadeFraction = clamp(fadeFraction,1.e-6f,1.f);

	// Choose two vectors that are perpendicular to the beam
	Vector perp1;
	ComputeBeamPerpendicular( delta, &perp1 );

	// Specify all the segments.
	CMatRenderContextPtr pRenderContext( g_pMaterialSystem );
	CBeamSegDraw segDraw;
	segDraw.Start( pRenderContext, segments, NULL );

	for ( i = 0; i < segments; i++ )
	{
		Assert( noiseIndex < (noise_divisions<<16) );
		BeamSeg_t curSeg;
		curSeg.m_flAlpha = 1;

		fraction = i * div;

		// Fade in our out beam to fadeLength

		if ( (flags & FBEAM_SHADEIN) && (flags & FBEAM_SHADEOUT) )
		{
			if (fraction < 0.5)
			{
				brightness = 2*(fraction/fadeFraction);
			}
			else
			{
				brightness = 2*(1.0 - (fraction/fadeFraction));
			}
		}
		else if ( flags & FBEAM_SHADEIN )
		{
			brightness = fraction/fadeFraction;
		}
		else if ( flags & FBEAM_SHADEOUT )
		{
			brightness = 1.0 - (fraction/fadeFraction);
		}

		// clamps
		if (brightness < 0 )		
		{
			brightness = 0;
		}
		else if (brightness > 1)		
		{
			brightness = 1;
		}

		VectorScale( *((Vector*)color), brightness, curSeg.m_vColor );

		// UNDONE: Make this a spline instead of just a line?
		VectorMA( source, fraction, delta, curSeg.m_vPos );
 
		// Distort using noise
		if ( scale != 0 )
		{
			factor = prgNoise[noiseIndex>>16] * scale;
			if ( flags & FBEAM_SINENOISE )
			{
				float	s, c;
				SinCos( fraction*M_PI*length + freq, &s, &c );
				VectorMA( curSeg.m_vPos, factor * s, CurrentViewUp(), curSeg.m_vPos );
				// Rotate the noise along the perpendicluar axis a bit to keep the bolt from looking diagonal
				VectorMA( curSeg.m_vPos, factor * c, CurrentViewRight(), curSeg.m_vPos );
			}
			else
			{
				VectorMA( curSeg.m_vPos, factor, perp1, curSeg.m_vPos );
			}
		}

		// Specify the next segment.
		if( endWidth == startWidth )
		{
			curSeg.m_flWidth = startWidth * 2;
		}
		else
		{
			curSeg.m_flWidth = ((fraction*(endWidth-startWidth))+startWidth) * 2;
		}
		
		curSeg.m_flTexCoord = vLast;
		segDraw.NextSeg( &curSeg );


		vLast += vStep;	// Advance texture scroll (v axis only)
		noiseIndex += noiseStep;
	}