CStringVector SplitString( const CString& strString, LPCTSTR szSplitter )
{
CStringVector arrStrings;
int curPos = 0;
CString resToken = strString.Tokenize(szSplitter, curPos);
while (resToken != _T(""))
{
arrStrings.push_back(resToken);
resToken = strString.Tokenize(szSplitter, curPos);
};
return arrStrings;
}
int
PokerData::SetUserAvatar(int nUserId, _String &sAvatarFileName, int nAvatarId /*= -1*/, bool bIsPrivateAvatar /*= true*/){
if( nUserId <= 0 ) return 0;
SetUserAvatarProc proc;
proc.m_nAvatarId = nAvatarId;
proc.m_nUserId = nUserId;
proc.m_bIsPrivateAvatar = bIsPrivateAvatar;
int nRet = 0;
if( m_pDataMan->ExecuteProc(&proc) && proc.m_nSuccess == 0 ){
int nAvatarIdNew = proc.m_nAvatarIdNew;
nRet = nAvatarIdNew;
if( nAvatarId != nAvatarIdNew ){
sAvatarFileName = GetAvatarFileName(nAvatarIdNew);
// Update new avatars file name. {{
PokerAvatar avatarNew;
avatarNew.m_nId = nAvatarIdNew;
avatarNew.m_sAvatarFileName = sAvatarFileName;
CStringVector arrDirtyFields;
arrDirtyFields.push_back(_T("AVATAR_FILE_NAME"));
if( m_pDataMan->SaveRecord(&avatarNew, &arrDirtyFields) ){
/*
PokerAvatar* pAvatarInfoNew = new PokerAvatar();
pAvatarInfoNew->m_nId = proc.m_nAvatarIdNew;
pAvatarInfoNew->m_nPrivateUserId = nUserId;
pAvatarInfoNew->m_sAvatarFileName = sAvatarFileName;
pAvatarInfoNew->m_recStatus = 0;
m_listAvatars.Add(pAvatarInfoNew);
*/
}
// }}
}
else
sAvatarFileName = GetAvatarFileName(nAvatarId);
nAvatarIdNew = proc.m_nAvatarIdNew;
}
return nRet;
}
// Получить пути к дочерним веткам реестра
CStringVector GetChildRegKeys( LPCTSTR szPath )
{
HKEY hKey;
if ( RegOpenKey(HKEY_LOCAL_MACHINE, szPath, &hKey) != ERROR_SUCCESS )
return CStringVector();
DWORD dwLargestKeySize = 0;
if ( RegQueryInfoKey(hKey, 0,0,0,0,&dwLargestKeySize,0,0,0,0,0,0) != ERROR_SUCCESS )
dwLargestKeySize = 1024;
LPTSTR szKeyBuf = new TCHAR[dwLargestKeySize+2];
CStringVector arrKeys;
DWORD i=0;
while ( RegEnumKey(hKey, i++, szKeyBuf, dwLargestKeySize+1) == ERROR_SUCCESS )
{
arrKeys.push_back(szKeyBuf);
}
RegCloseKey(hKey);
delete[] szKeyBuf;
return arrKeys;
}
// line 1 - TOOL (start of tool definition)
// line 2 - tool material (1-HSS, 2-CARBIDE, 3-COATED CAR, 4-CERAMIC, 5-BORZON, 10-UNKNOWN)
// line 3 - tool comment
// line 4 - tool name (geometry reference for backplot)
// line 5 - tool manufacturer
// line 6 - chuck designation
// line 7 - tool_no, tool_type, rad_type, dia, crad, thds, tip_angle,
// dia_off, len_off, feed, plunge, retract, rpm, coolant, n_flutes
// line 8 - Drilling attributes (see tool_type in line 7 above)
// line 8 - cycle, peck1, peck2, peck_clr, chip_brk, dwell, shldr_angle, root_dia (tap), bore_shift
// line 8 - Milling attributes (see tool_type in line 7 above)
// line 8 - cut_able, rgh_x, rgh_z, fin_x, fin_z, tip_dia, root_dia (thd mill), thd_angle
// line 9 - pilot_dia, flute_len, oa_len, shldr_len, arbor_dia, hldr_dia, hldr_len, spindle_ccw, sfm, fpt, metric
HRESULT CDBStepNC::LoadMasterCAMTool(CString filename)
{
CString contents = ReadAFile(filename);
if(contents.GetLength()< 1)
return E_INVALIDARG;
CStringVector lines = CStringVector::Tokenize(contents, "\n");
CStringVector columns;
columns.push_back("toolid");
columns.push_back("name");
columns.push_back("tooltypeid");
columns.push_back("materialid");
columns.push_back("number_of_teeth");
columns.push_back("hand_of_cut");
columns.push_back("coolant_through_tool");
columns.push_back("cutting_edge_length");
columns.push_back("flute_length");
columns.push_back("overall_length");
columns.push_back("shoulder_length");
columns.push_back("tip_diameter");
columns.push_back("tool_tip_half_angle");
columns.push_back("sfm");
columns.push_back("fpt");
columns.push_back("metric");
CStringVector values;
values.resize(16);
for(int i=40, j=1; i< lines.size(); i+=10, j++)
{
CStringVector items1 = CStringVector::Tokenize(lines[i+1]," ");
CStringVector items2 = CStringVector::Tokenize(lines[i+2]," ");
CStringVector items3 = CStringVector::Tokenize(lines[i+3]," ");
CStringVector items7 = CStringVector::Tokenize(lines[i+7]," ");
CStringVector items8 = CStringVector::Tokenize(lines[i+8]," ");
CStringVector items9 = CStringVector::Tokenize(lines[i+9]," ");
values[0] =StrFormat("%d", j); // toolid
values[1]=lines[i+3].Mid(lines[i+3].Find("-")+1).Trim(); // name
values[2]=items7[3].Trim(); // tooltypeid
values[3]=items2[2].Trim(); // materialid
values[4]= items7[16].Trim(); // number_of_teeth
values[5]= (items9[9] ==1) ? "LEFT" : "RIGHT"; // hand_of_cut
values[6]= items7[15]; // coolant_through_tool
values[7]= items9[3]; // cutting_edge_length
values[8]= items9[3]; // flute_length
values[9]= items7[10]; // overall_length
values[10]= items9[5]; // shoulder_length
values[11]= items7[5]; // tip_diameter
values[12]= items7[8]; // tool_tip_half_angle
values[13]= items9[10]; // sfm
values[14]= items9[11]; // fpt
values[15]= items9[12].Trim(); // metric
InsertRow("milling_cutter", columns, values);
}
return S_OK;
}