void main_shutdown_rescue( int exitVal, Dag::dag_status dagStatus ) {
// Avoid possible infinite recursion if you hit a fatal error
// while writing a rescue DAG.
static bool inShutdownRescue = false;
if ( inShutdownRescue ) {
return;
}
inShutdownRescue = true;
dagman.dag->_dagStatus = dagStatus;
debug_printf( DEBUG_QUIET, "Aborting DAG...\n" );
// Avoid writing two different rescue DAGs if the "main" DAG and
// the final node (if any) both fail.
static bool wroteRescue = false;
if( dagman.dag ) {
// We write the rescue DAG *before* removing jobs because
// otherwise if we crashed, failed, or were killed while
// removing them, we would leave the DAG in an
// unrecoverable state...
if( exitVal != 0 ) {
if ( dagman.maxRescueDagNum > 0 ) {
dagman.dag->Rescue( dagman.primaryDagFile.Value(),
dagman.multiDags, dagman.maxRescueDagNum,
wroteRescue, false,
dagman._writePartialRescueDag );
wroteRescue = true;
} else {
debug_printf( DEBUG_QUIET, "No rescue DAG written because "
"DAGMAN_MAX_RESCUE_NUM is 0\n" );
}
}
debug_printf( DEBUG_DEBUG_1, "We have %d running jobs to remove\n",
dagman.dag->NumJobsSubmitted() );
if( dagman.dag->NumJobsSubmitted() > 0 ) {
debug_printf( DEBUG_NORMAL, "Removing submitted jobs...\n" );
dagman.dag->RemoveRunningJobs(dagman);
}
if ( dagman.dag->NumScriptsRunning() > 0 ) {
debug_printf( DEBUG_NORMAL, "Removing running scripts...\n" );
dagman.dag->RemoveRunningScripts();
}
dagman.dag->PrintDeferrals( DEBUG_NORMAL, true );
// Start the final node if we have one.
if ( dagman.dag->StartFinalNode() ) {
// We started a final node; return here so we wait for the
// final node to finish, instead of exiting immediately.
inShutdownRescue = false;
return;
}
dagman.dag->DumpNodeStatus( false, true );
dagman.dag->GetJobstateLog().WriteDagmanFinished( exitVal );
}
MSC_SUPPRESS_WARNING_FIXME(6031) // return falue of unlink ignored.
unlink( lockFileName );
dagman.CleanUp();
inShutdownRescue = false;
DC_Exit( exitVal );
}
// this can be called by other functions, or by DC when the schedd is
// shutdown gracefully
void main_shutdown_graceful() {
print_status();
dagman.dag->DumpNodeStatus( true, false );
dagman.dag->GetJobstateLog().WriteDagmanFinished( EXIT_RESTART );
dagman.CleanUp();
DC_Exit( EXIT_RESTART );
}
void ExitSuccess() {
dagman.dag->DumpNodeStatus( false, false );
dagman.dag->GetJobstateLog().WriteDagmanFinished( EXIT_OKAY );
MSC_SUPPRESS_WARNING_FIXME(6031) // return falue of unlink ignored.
unlink( lockFileName );
dagman.CleanUp();
DC_Exit( EXIT_OKAY );
}
void ExitSuccess() {
print_status();
dagman.dag->DumpNodeStatus( false, false );
dagman.dag->GetJobstateLog().WriteDagmanFinished( EXIT_OKAY );
tolerant_unlink( lockFileName );
dagman.CleanUp();
DC_Exit( EXIT_OKAY );
}
//---------------------------------------------------------------------------
void main_init (int argc, char ** const argv) {
printf ("Executing condor dagman ... \n");
// flag used if DAGMan is invoked with -WaitForDebug so we
// wait for a developer to attach with a debugger...
volatile int wait_for_debug = 0;
// process any config vars -- this happens before we process
// argv[], since arguments should override config settings
dagman.Config();
// The DCpermission (last parm) should probably be PARENT, if it existed
daemonCore->Register_Signal( SIGUSR1, "SIGUSR1",
(SignalHandler) main_shutdown_remove,
"main_shutdown_remove", NULL);
/****** FOR TESTING *******
daemonCore->Register_Signal( SIGUSR2, "SIGUSR2",
(SignalHandler) main_testing_stub,
"main_testing_stub", NULL);
****** FOR TESTING ********/
debug_progname = condor_basename(argv[0]);
// condor_submit_dag version from .condor.sub
bool allowVerMismatch = false;
const char *csdVersion = "undefined";
int i;
for (i = 0 ; i < argc ; i++) {
debug_printf( DEBUG_NORMAL, "argv[%d] == \"%s\"\n", i, argv[i] );
}
if (argc < 2) Usage(); // Make sure an input file was specified
// get dagman job id from environment, if it's there
// (otherwise it will be set to "-1.-1.-1")
dagman.DAGManJobId.SetFromString( getenv( EnvGetName( ENV_ID ) ) );
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Minimum legal version for a .condor.sub file to be compatible
// with this condor_dagman binary.
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// Be sure to change this if the arguments or environment
// passed to condor_dagman change in an incompatible way!!
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
struct DagVersionData {
int majorVer;
int minorVer;
int subMinorVer;
};
const DagVersionData MIN_SUBMIT_FILE_VERSION = { 7, 1, 2 };
// Construct a string of the minimum submit file version.
MyString minSubmitVersionStr;
minSubmitVersionStr.formatstr( "%d.%d.%d",
MIN_SUBMIT_FILE_VERSION.majorVer,
MIN_SUBMIT_FILE_VERSION.minorVer,
MIN_SUBMIT_FILE_VERSION.subMinorVer );
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// Process command-line arguments
//
for (i = 1; i < argc; i++) {
if( !strcasecmp( "-Debug", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No debug level specified\n" );
Usage();
}
debug_level = (debug_level_t) atoi (argv[i]);
} else if( !strcasecmp( "-Lockfile", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No DagMan lockfile specified\n" );
Usage();
}
lockFileName = argv[i];
} else if( !strcasecmp( "-Help", argv[i] ) ) {
Usage();
} else if (!strcasecmp( "-Dag", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No DAG specified\n" );
Usage();
}
dagman.dagFiles.append( argv[i] );
} else if( !strcasecmp( "-MaxIdle", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT,
"Integer missing after -MaxIdle\n" );
Usage();
}
dagman.maxIdle = atoi( argv[i] );
} else if( !strcasecmp( "-MaxJobs", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT,
"Integer missing after -MaxJobs\n" );
Usage();
}
dagman.maxJobs = atoi( argv[i] );
} else if( !strcasecmp( "-MaxScripts", argv[i] ) ) {
debug_printf( DEBUG_SILENT, "-MaxScripts has been replaced with "
"-MaxPre and -MaxPost arguments\n" );
Usage();
} else if( !strcasecmp( "-MaxPre", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT,
"Integer missing after -MaxPre\n" );
Usage();
}
dagman.maxPreScripts = atoi( argv[i] );
} else if( !strcasecmp( "-MaxPost", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT,
"Integer missing after -MaxPost\n" );
Usage();
}
dagman.maxPostScripts = atoi( argv[i] );
} else if( !strcasecmp( "-NoEventChecks", argv[i] ) ) {
debug_printf( DEBUG_QUIET, "Warning: -NoEventChecks is "
"ignored; please use the DAGMAN_ALLOW_EVENTS "
"config parameter instead\n");
check_warning_strictness( DAG_STRICT_1 );
} else if( !strcasecmp( "-AllowLogError", argv[i] ) ) {
dagman.allowLogError = true;
} else if( !strcasecmp( "-DontAlwaysRunPost",argv[i] ) ) {
dagman._runPost = false;
} else if( !strcasecmp( "-WaitForDebug", argv[i] ) ) {
wait_for_debug = 1;
} else if( !strcasecmp( "-UseDagDir", argv[i] ) ) {
dagman.useDagDir = true;
} else if( !strcasecmp( "-AutoRescue", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No AutoRescue value specified\n" );
Usage();
}
dagman.autoRescue = (atoi( argv[i] ) != 0);
} else if( !strcasecmp( "-DoRescueFrom", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No rescue DAG number specified\n" );
Usage();
}
dagman.doRescueFrom = atoi (argv[i]);
} else if( !strcasecmp( "-CsdVersion", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No CsdVersion value specified\n" );
Usage();
}
csdVersion = argv[i];
} else if( !strcasecmp( "-AllowVersionMismatch", argv[i] ) ) {
allowVerMismatch = true;
} else if( !strcasecmp( "-DumpRescue", argv[i] ) ) {
dagman.dumpRescueDag = true;
} else if( !strcasecmp( "-verbose", argv[i] ) ) {
dagman._submitDagDeepOpts.bVerbose = true;
} else if( !strcasecmp( "-force", argv[i] ) ) {
dagman._submitDagDeepOpts.bForce = true;
} else if( !strcasecmp( "-notification", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No notification value specified\n" );
Usage();
}
dagman._submitDagDeepOpts.strNotification = argv[i];
} else if( !strcasecmp( "-dagman", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No dagman value specified\n" );
Usage();
}
dagman._submitDagDeepOpts.strDagmanPath = argv[i];
} else if( !strcasecmp( "-outfile_dir", argv[i] ) ) {
i++;
if( argc <= i || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_SILENT, "No outfile_dir value specified\n" );
Usage();
}
dagman._submitDagDeepOpts.strOutfileDir = argv[i];
} else if( !strcasecmp( "-update_submit", argv[i] ) ) {
dagman._submitDagDeepOpts.updateSubmit = true;
} else if( !strcasecmp( "-import_env", argv[i] ) ) {
dagman._submitDagDeepOpts.importEnv = true;
} else if( !strcasecmp( "-priority", argv[i] ) ) {
++i;
if( i >= argc || strcmp( argv[i], "" ) == 0 ) {
debug_printf( DEBUG_NORMAL, "No priority value specified\n");
Usage();
}
dagman._submitDagDeepOpts.priority = atoi(argv[i]);
} else if( !strcasecmp( "-dont_use_default_node_log", argv[i] ) ) {
dagman._submitDagDeepOpts.always_use_node_log = false;
} else {
debug_printf( DEBUG_SILENT, "\nUnrecognized argument: %s\n",
argv[i] );
Usage();
}
}
dagman.dagFiles.rewind();
dagman.primaryDagFile = dagman.dagFiles.next();
dagman.multiDags = (dagman.dagFiles.number() > 1);
MyString tmpDefaultLog;
if ( dagman._defaultNodeLog != NULL ) {
tmpDefaultLog = dagman._defaultNodeLog;
free( dagman._defaultNodeLog );
} else {
tmpDefaultLog = dagman.primaryDagFile + ".nodes.log";
}
// Force default log file path to be absolute so it works
// with -usedagdir and DIR nodes.
CondorError errstack;
if ( !MultiLogFiles::makePathAbsolute( tmpDefaultLog, errstack) ) {
debug_printf( DEBUG_QUIET, "Unable to convert default log "
"file name to absolute path: %s\n",
errstack.getFullText().c_str() );
dagman.dag->GetJobstateLog().WriteDagmanFinished( EXIT_ERROR );
DC_Exit( EXIT_ERROR );
}
dagman._defaultNodeLog = strdup( tmpDefaultLog.Value() );
debug_printf( DEBUG_NORMAL, "Default node log file is: <%s>\n",
dagman._defaultNodeLog);
//
// Check the arguments
//
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Checking for version compatibility between the .condor.sub
// file and this condor_dagman binary...
// Note: if we're in recovery mode and the submit file version
// causes us to quit, we leave any existing node jobs still
// running -- may want to change that eventually. wenger 2009-10-13.
// Version of the condor_submit_dag that created our submit file.
CondorVersionInfo submitFileVersion( csdVersion );
// Version of this condor_dagman binary.
CondorVersionInfo dagmanVersion;
// Just generate this message fragment in one place.
MyString versionMsg;
versionMsg.formatstr("the version (%s) of this DAG's Condor submit "
"file (created by condor_submit_dag)", csdVersion );
// Make sure version in submit file is valid.
if( !submitFileVersion.is_valid() ) {
if ( !allowVerMismatch ) {
debug_printf( DEBUG_QUIET, "Error: %s is invalid!\n",
versionMsg.Value() );
DC_Exit( EXIT_ERROR );
} else {
debug_printf( DEBUG_NORMAL, "Warning: %s is invalid; "
"continuing because of -AllowVersionMismatch flag\n",
versionMsg.Value() );
}
// Make sure .condor.sub file is recent enough.
} else if ( submitFileVersion.compare_versions(
CondorVersion() ) != 0 ) {
if( !submitFileVersion.built_since_version(
MIN_SUBMIT_FILE_VERSION.majorVer,
MIN_SUBMIT_FILE_VERSION.minorVer,
MIN_SUBMIT_FILE_VERSION.subMinorVer ) ) {
if ( !allowVerMismatch ) {
debug_printf( DEBUG_QUIET, "Error: %s is older than "
"oldest permissible version (%s)\n",
versionMsg.Value(), minSubmitVersionStr.Value() );
DC_Exit( EXIT_ERROR );
} else {
debug_printf( DEBUG_NORMAL, "Warning: %s is older than "
"oldest permissible version (%s); continuing "
"because of -AllowVersionMismatch flag\n",
versionMsg.Value(), minSubmitVersionStr.Value() );
}
// Warn if .condor.sub file is a newer version than this binary.
} else if (dagmanVersion.compare_versions( csdVersion ) > 0 ) {
debug_printf( DEBUG_NORMAL, "Warning: %s is newer than "
"condor_dagman version (%s)\n", versionMsg.Value(),
CondorVersion() );
check_warning_strictness( DAG_STRICT_3 );
} else {
debug_printf( DEBUG_NORMAL, "Note: %s differs from "
"condor_dagman version (%s), but the "
"difference is permissible\n",
versionMsg.Value(), CondorVersion() );
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
if( dagman.primaryDagFile == "" ) {
debug_printf( DEBUG_SILENT, "No DAG file was specified\n" );
Usage();
}
if (lockFileName == NULL) {
debug_printf( DEBUG_SILENT, "No DAG lock file was specified\n" );
Usage();
}
if( dagman.maxJobs < 0 ) {
debug_printf( DEBUG_SILENT, "-MaxJobs must be non-negative\n");
Usage();
}
if( dagman.maxPreScripts < 0 ) {
debug_printf( DEBUG_SILENT, "-MaxPre must be non-negative\n" );
Usage();
}
if( dagman.maxPostScripts < 0 ) {
debug_printf( DEBUG_SILENT, "-MaxPost must be non-negative\n" );
Usage();
}
if( dagman.doRescueFrom < 0 ) {
debug_printf( DEBUG_SILENT, "-DoRescueFrom must be non-negative\n" );
Usage();
}
debug_printf( DEBUG_VERBOSE, "DAG Lockfile will be written to %s\n",
lockFileName );
if ( dagman.dagFiles.number() == 1 ) {
debug_printf( DEBUG_VERBOSE, "DAG Input file is %s\n",
dagman.primaryDagFile.Value() );
} else {
MyString msg = "DAG Input files are ";
dagman.dagFiles.rewind();
const char *dagFile;
while ( (dagFile = dagman.dagFiles.next()) != NULL ) {
msg += dagFile;
msg += " ";
}
msg += "\n";
debug_printf( DEBUG_VERBOSE, "%s", msg.Value() );
}
// if requested, wait for someone to attach with a debugger...
while( wait_for_debug ) { }
{
MyString cwd;
if( !condor_getcwd(cwd) ) {
cwd = "<null>";
}
debug_printf( DEBUG_DEBUG_1, "Current path is %s\n",cwd.Value());
char *temp = my_username();
debug_printf( DEBUG_DEBUG_1, "Current user is %s\n",
temp ? temp : "<null>" );
if( temp ) {
free( temp );
}
}
//
// Figure out the rescue DAG to run, if any (this is with "new-
// style" rescue DAGs).
//
int rescueDagNum = 0;
MyString rescueDagMsg;
if ( dagman.doRescueFrom != 0 ) {
rescueDagNum = dagman.doRescueFrom;
rescueDagMsg.formatstr( "Rescue DAG number %d specified", rescueDagNum );
RenameRescueDagsAfter( dagman.primaryDagFile.Value(),
dagman.multiDags, rescueDagNum, dagman.maxRescueDagNum );
} else if ( dagman.autoRescue ) {
rescueDagNum = FindLastRescueDagNum(
dagman.primaryDagFile.Value(),
dagman.multiDags, dagman.maxRescueDagNum );
rescueDagMsg.formatstr( "Found rescue DAG number %d", rescueDagNum );
}
//
// Fill in values in the deep submit options that we haven't
// already set.
//
dagman._submitDagDeepOpts.bAllowLogError = dagman.allowLogError;
dagman._submitDagDeepOpts.useDagDir = dagman.useDagDir;
dagman._submitDagDeepOpts.autoRescue = dagman.autoRescue;
dagman._submitDagDeepOpts.doRescueFrom = dagman.doRescueFrom;
dagman._submitDagDeepOpts.allowVerMismatch = allowVerMismatch;
dagman._submitDagDeepOpts.recurse = false;
//
// Create the DAG
//
// Note: a bunch of the parameters we pass here duplicate things
// in submitDagOpts, but I'm keeping them separate so we don't have to
// bother to construct a new SubmitDagOtions object for splices.
// wenger 2010-03-25
dagman.dag = new Dag( dagman.dagFiles, dagman.maxJobs,
dagman.maxPreScripts, dagman.maxPostScripts,
dagman.allowLogError, dagman.useDagDir,
dagman.maxIdle, dagman.retrySubmitFirst,
dagman.retryNodeFirst, dagman.condorRmExe,
dagman.storkRmExe, &dagman.DAGManJobId,
dagman.prohibitMultiJobs, dagman.submitDepthFirst,
dagman._defaultNodeLog,
dagman._generateSubdagSubmits,
&dagman._submitDagDeepOpts,
false ); /* toplevel dag! */
if( dagman.dag == NULL ) {
EXCEPT( "ERROR: out of memory!\n");
}
dagman.dag->SetAbortOnScarySubmit( dagman.abortOnScarySubmit );
dagman.dag->SetAllowEvents( dagman.allow_events );
dagman.dag->SetConfigFile( dagman._dagmanConfigFile );
dagman.dag->SetMaxJobHolds( dagman._maxJobHolds );
dagman.dag->SetPostRun(dagman._runPost);
if( dagman._submitDagDeepOpts.priority != 0 ) { // From command line
dagman.dag->SetDefaultPriority(dagman._submitDagDeepOpts.priority);
} else if( dagman._defaultPriority != 0 ) { // From config file
dagman.dag->SetDefaultPriority(dagman._defaultPriority);
dagman._submitDagDeepOpts.priority = dagman._defaultPriority;
}
//
// Parse the input files. The parse() routine
// takes care of adding jobs and dependencies to the DagMan
//
dagman.mungeNodeNames = (dagman.dagFiles.number() > 1);
parseSetDoNameMunge( dagman.mungeNodeNames );
debug_printf( DEBUG_VERBOSE, "Parsing %d dagfiles\n",
dagman.dagFiles.number() );
dagman.dagFiles.rewind();
char *dagFile;
// Here we make a copy of the dagFiles for iteration purposes. Deep inside
// of the parsing, copies of the dagman.dagFile string list happen which
// mess up the iteration of this list.
StringList sl( dagman.dagFiles );
sl.rewind();
while ( (dagFile = sl.next()) != NULL ) {
debug_printf( DEBUG_VERBOSE, "Parsing %s ...\n", dagFile );
if( !parse( dagman.dag, dagFile, dagman.useDagDir ) ) {
if ( dagman.dumpRescueDag ) {
// Dump the rescue DAG so we can see what we got
// in the failed parse attempt.
debug_printf( DEBUG_QUIET, "Dumping rescue DAG "
"because of -DumpRescue flag\n" );
dagman.dag->Rescue( dagman.primaryDagFile.Value(),
dagman.multiDags, dagman.maxRescueDagNum,
false, true, false );
}
dagman.dag->RemoveRunningJobs(dagman, true);
MSC_SUPPRESS_WARNING_FIXME(6031) // return falue of unlink ignored.
unlink( lockFileName );
dagman.CleanUp();
// Note: debug_error calls DC_Exit().
debug_error( 1, DEBUG_QUIET, "Failed to parse %s\n",
dagFile );
}
}
if( dagman.dag->GetDefaultPriority() != 0 ) {
dagman.dag->SetDefaultPriorities(); // Applies to the nodes of the dag
}
dagman.dag->GetJobstateLog().WriteDagmanStarted( dagman.DAGManJobId );
if ( rescueDagNum > 0 ) {
// Get our Pegasus sequence numbers set correctly.
dagman.dag->GetJobstateLog().InitializeRescue();
}
// lift the final set of splices into the main dag.
dagman.dag->LiftSplices(SELF);
//
// Actually parse the "new-new" style (partial DAG info only)
// rescue DAG here. Note: this *must* be done after splices
// are lifted!
//
if ( rescueDagNum > 0 ) {
dagman.rescueFileToRun = RescueDagName(
dagman.primaryDagFile.Value(),
dagman.multiDags, rescueDagNum );
debug_printf ( DEBUG_QUIET, "%s; running %s in combination with "
"normal DAG file%s\n", rescueDagMsg.Value(),
dagman.rescueFileToRun.Value(),
dagman.multiDags ? "s" : "");
debug_printf ( DEBUG_QUIET,
"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n");
debug_printf ( DEBUG_QUIET, "USING RESCUE DAG %s\n",
dagman.rescueFileToRun.Value() );
// Turn off node name munging for the rescue DAG, because
// it will already have munged node names.
parseSetDoNameMunge( false );
if( !parse( dagman.dag, dagman.rescueFileToRun.Value(),
dagman.useDagDir ) ) {
if ( dagman.dumpRescueDag ) {
// Dump the rescue DAG so we can see what we got
// in the failed parse attempt.
debug_printf( DEBUG_QUIET, "Dumping rescue DAG "
"because of -DumpRescue flag\n" );
dagman.dag->Rescue( dagman.primaryDagFile.Value(),
dagman.multiDags, dagman.maxRescueDagNum,
true, false );
}
dagman.dag->RemoveRunningJobs(dagman, true);
MSC_SUPPRESS_WARNING_FIXME(6031) // return falue of unlink ignored.
unlink( lockFileName );
dagman.CleanUp();
// Note: debug_error calls DC_Exit().
debug_error( 1, DEBUG_QUIET, "Failed to parse %s\n",
dagFile );
}
}
dagman.dag->CheckThrottleCats();
// fix up any use of $(JOB) in the vars values for any node
dagman.dag->ResolveVarsInterpolations();
/* debug_printf(DEBUG_QUIET, "COMPLETED DAG!\n");*/
/* dagman.dag->PrintJobList();*/
#ifndef NOT_DETECT_CYCLE
if( dagman.startup_cycle_detect && dagman.dag->isCycle() )
{
// Note: maybe we should run the final node here, if there is one.
// wenger 2011-12-19.
debug_error (1, DEBUG_QUIET, "ERROR: a cycle exists in the dag, please check input\n");
}
#endif
debug_printf( DEBUG_VERBOSE, "Dag contains %d total jobs\n",
dagman.dag->NumNodes( true ) );
MyString firstLocation;
if ( dagman.dag->GetReject( firstLocation ) ) {
debug_printf( DEBUG_QUIET, "Exiting because of REJECT "
"specification in %s. This most likely means "
"that the DAG file was produced with the -DumpRescue "
"flag when parsing the original DAG failed.\n",
firstLocation.Value() );
DC_Exit( EXIT_ERROR );
return;
}
dagman.dag->DumpDotFile();
if ( dagman.dumpRescueDag ) {
debug_printf( DEBUG_QUIET, "Dumping rescue DAG and exiting "
"because of -DumpRescue flag\n" );
dagman.dag->Rescue( dagman.primaryDagFile.Value(),
dagman.multiDags, dagman.maxRescueDagNum, false,
false, false );
ExitSuccess();
return;
}
//------------------------------------------------------------------------
// Bootstrap and Recovery
//
// If the Lockfile exists, this indicates a premature termination
// of a previous run of Dagman. If condor log is also present,
// we run in recovery mode
// If the Daglog is not present, then we do not run in recovery
// mode
{
bool recovery = access(lockFileName, F_OK) == 0;
if (recovery) {
debug_printf( DEBUG_VERBOSE, "Lock file %s detected, \n",
lockFileName);
if (dagman.abortDuplicates) {
if (util_check_lock_file(lockFileName) == 1) {
debug_printf( DEBUG_QUIET, "Aborting because it "
"looks like another instance of DAGMan is "
"currently running on this DAG; if that is "
"not the case, delete the lock file (%s) "
"and re-submit the DAG.\n", lockFileName );
dagman.dag->GetJobstateLog().
WriteDagmanFinished( EXIT_RESTART );
dagman.CleanUp();
DC_Exit( EXIT_ERROR );
// We should never get to here!
}
}
}
//
// If this DAGMan continues, it should overwrite the lock
// file if it exists.
//
util_create_lock_file(lockFileName, dagman.abortDuplicates);
debug_printf( DEBUG_VERBOSE, "Bootstrapping...\n");
if( !dagman.dag->Bootstrap( recovery ) ) {
dagman.dag->PrintReadyQ( DEBUG_DEBUG_1 );
debug_error( 1, DEBUG_QUIET, "ERROR while bootstrapping\n");
}
}
debug_printf( DEBUG_VERBOSE, "Registering condor_event_timer...\n" );
daemonCore->Register_Timer( 1, dagman.m_user_log_scan_interval,
condor_event_timer, "condor_event_timer" );
dagman.dag->SetPendingNodeReportInterval(
dagman.pendingReportInterval );
}