/// SplitCriticalEdge - If this edge is a critical edge, insert a new node to
/// split the critical edge. This will update DominatorTree information if it
/// is available, thus calling this pass will not invalidate either of them.
/// This returns the new block if the edge was split, null otherwise.
///
/// If MergeIdenticalEdges is true (not the default), *all* edges from TI to the
/// specified successor will be merged into the same critical edge block.
/// This is most commonly interesting with switch instructions, which may
/// have many edges to any one destination. This ensures that all edges to that
/// dest go to one block instead of each going to a different block, but isn't
/// the standard definition of a "critical edge".
///
/// It is invalid to call this function on a critical edge that starts at an
/// IndirectBrInst. Splitting these edges will almost always create an invalid
/// program because the address of the new block won't be the one that is jumped
/// to.
///
BasicBlock *llvm::SplitCriticalEdge(TerminatorInst *TI, unsigned SuccNum,
Pass *P, bool MergeIdenticalEdges,
bool DontDeleteUselessPhis,
bool SplitLandingPads) {
if (!isCriticalEdge(TI, SuccNum, MergeIdenticalEdges)) return 0;
assert(!isa<IndirectBrInst>(TI) &&
"Cannot split critical edge from IndirectBrInst");
BasicBlock *TIBB = TI->getParent();
BasicBlock *DestBB = TI->getSuccessor(SuccNum);
// Splitting the critical edge to a landing pad block is non-trivial. Don't do
// it in this generic function.
if (DestBB->isLandingPad()) return 0;
// Create a new basic block, linking it into the CFG.
BasicBlock *NewBB = BasicBlock::Create(TI->getContext(),
TIBB->getName() + "." + DestBB->getName() + "_crit_edge");
// Create our unconditional branch.
BranchInst *NewBI = BranchInst::Create(DestBB, NewBB);
NewBI->setDebugLoc(TI->getDebugLoc());
// Branch to the new block, breaking the edge.
TI->setSuccessor(SuccNum, NewBB);
// Insert the block into the function... right after the block TI lives in.
Function &F = *TIBB->getParent();
Function::iterator FBBI = TIBB;
F.getBasicBlockList().insert(++FBBI, NewBB);
// If there are any PHI nodes in DestBB, we need to update them so that they
// merge incoming values from NewBB instead of from TIBB.
{
unsigned BBIdx = 0;
for (BasicBlock::iterator I = DestBB->begin(); isa<PHINode>(I); ++I) {
// We no longer enter through TIBB, now we come in through NewBB.
// Revector exactly one entry in the PHI node that used to come from
// TIBB to come from NewBB.
PHINode *PN = cast<PHINode>(I);
// Reuse the previous value of BBIdx if it lines up. In cases where we
// have multiple phi nodes with *lots* of predecessors, this is a speed
// win because we don't have to scan the PHI looking for TIBB. This
// happens because the BB list of PHI nodes are usually in the same
// order.
if (PN->getIncomingBlock(BBIdx) != TIBB)
BBIdx = PN->getBasicBlockIndex(TIBB);
PN->setIncomingBlock(BBIdx, NewBB);
}
}
// If there are any other edges from TIBB to DestBB, update those to go
// through the split block, making those edges non-critical as well (and
// reducing the number of phi entries in the DestBB if relevant).
if (MergeIdenticalEdges) {
for (unsigned i = SuccNum+1, e = TI->getNumSuccessors(); i != e; ++i) {
if (TI->getSuccessor(i) != DestBB) continue;
// Remove an entry for TIBB from DestBB phi nodes.
DestBB->removePredecessor(TIBB, DontDeleteUselessPhis);
// We found another edge to DestBB, go to NewBB instead.
TI->setSuccessor(i, NewBB);
}
}
// If we don't have a pass object, we can't update anything...
if (P == 0) return NewBB;
DominatorTree *DT = P->getAnalysisIfAvailable<DominatorTree>();
LoopInfo *LI = P->getAnalysisIfAvailable<LoopInfo>();
// If we have nothing to update, just return.
if (DT == 0 && LI == 0)
return NewBB;
// Now update analysis information. Since the only predecessor of NewBB is
// the TIBB, TIBB clearly dominates NewBB. TIBB usually doesn't dominate
// anything, as there are other successors of DestBB. However, if all other
// predecessors of DestBB are already dominated by DestBB (e.g. DestBB is a
// loop header) then NewBB dominates DestBB.
SmallVector<BasicBlock*, 8> OtherPreds;
// If there is a PHI in the block, loop over predecessors with it, which is
// faster than iterating pred_begin/end.
if (PHINode *PN = dyn_cast<PHINode>(DestBB->begin())) {
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingBlock(i) != NewBB)
OtherPreds.push_back(PN->getIncomingBlock(i));
} else {
for (pred_iterator I = pred_begin(DestBB), E = pred_end(DestBB);
I != E; ++I) {
BasicBlock *P = *I;
if (P != NewBB)
OtherPreds.push_back(P);
}
}
bool NewBBDominatesDestBB = true;
// Should we update DominatorTree information?
if (DT) {
DomTreeNode *TINode = DT->getNode(TIBB);
// The new block is not the immediate dominator for any other nodes, but
// TINode is the immediate dominator for the new node.
//
if (TINode) { // Don't break unreachable code!
DomTreeNode *NewBBNode = DT->addNewBlock(NewBB, TIBB);
DomTreeNode *DestBBNode = 0;
// If NewBBDominatesDestBB hasn't been computed yet, do so with DT.
if (!OtherPreds.empty()) {
DestBBNode = DT->getNode(DestBB);
while (!OtherPreds.empty() && NewBBDominatesDestBB) {
if (DomTreeNode *OPNode = DT->getNode(OtherPreds.back()))
NewBBDominatesDestBB = DT->dominates(DestBBNode, OPNode);
OtherPreds.pop_back();
}
OtherPreds.clear();
}
// If NewBBDominatesDestBB, then NewBB dominates DestBB, otherwise it
// doesn't dominate anything.
if (NewBBDominatesDestBB) {
if (!DestBBNode) DestBBNode = DT->getNode(DestBB);
DT->changeImmediateDominator(DestBBNode, NewBBNode);
}
}
}
// Update LoopInfo if it is around.
if (LI) {
if (Loop *TIL = LI->getLoopFor(TIBB)) {
// If one or the other blocks were not in a loop, the new block is not
// either, and thus LI doesn't need to be updated.
if (Loop *DestLoop = LI->getLoopFor(DestBB)) {
if (TIL == DestLoop) {
// Both in the same loop, the NewBB joins loop.
DestLoop->addBasicBlockToLoop(NewBB, LI->getBase());
} else if (TIL->contains(DestLoop)) {
// Edge from an outer loop to an inner loop. Add to the outer loop.
TIL->addBasicBlockToLoop(NewBB, LI->getBase());
} else if (DestLoop->contains(TIL)) {
// Edge from an inner loop to an outer loop. Add to the outer loop.
DestLoop->addBasicBlockToLoop(NewBB, LI->getBase());
} else {
// Edge from two loops with no containment relation. Because these
// are natural loops, we know that the destination block must be the
// header of its loop (adding a branch into a loop elsewhere would
// create an irreducible loop).
assert(DestLoop->getHeader() == DestBB &&
"Should not create irreducible loops!");
if (Loop *P = DestLoop->getParentLoop())
P->addBasicBlockToLoop(NewBB, LI->getBase());
}
}
// If TIBB is in a loop and DestBB is outside of that loop, split the
// other exit blocks of the loop that also have predecessors outside
// the loop, to maintain a LoopSimplify guarantee.
if (!TIL->contains(DestBB) &&
P->mustPreserveAnalysisID(LoopSimplifyID)) {
assert(!TIL->contains(NewBB) &&
"Split point for loop exit is contained in loop!");
// Update LCSSA form in the newly created exit block.
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(TIBB, NewBB, DestBB);
// For each unique exit block...
// FIXME: This code is functionally equivalent to the corresponding
// loop in LoopSimplify.
SmallVector<BasicBlock *, 4> ExitBlocks;
TIL->getExitBlocks(ExitBlocks);
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
// Collect all the preds that are inside the loop, and note
// whether there are any preds outside the loop.
SmallVector<BasicBlock *, 4> Preds;
bool HasPredOutsideOfLoop = false;
BasicBlock *Exit = ExitBlocks[i];
for (pred_iterator I = pred_begin(Exit), E = pred_end(Exit);
I != E; ++I) {
BasicBlock *P = *I;
if (TIL->contains(P)) {
if (isa<IndirectBrInst>(P->getTerminator())) {
Preds.clear();
break;
}
Preds.push_back(P);
} else {
HasPredOutsideOfLoop = true;
}
}
// If there are any preds not in the loop, we'll need to split
// the edges. The Preds.empty() check is needed because a block
// may appear multiple times in the list. We can't use
// getUniqueExitBlocks above because that depends on LoopSimplify
// form, which we're in the process of restoring!
if (!Preds.empty() && HasPredOutsideOfLoop) {
if (!Exit->isLandingPad()) {
BasicBlock *NewExitBB =
SplitBlockPredecessors(Exit, Preds, "split", P);
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(Preds, NewExitBB, Exit);
} else if (SplitLandingPads) {
SmallVector<BasicBlock*, 8> NewBBs;
SplitLandingPadPredecessors(Exit, Preds,
".split1", ".split2",
P, NewBBs);
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(Preds, NewBBs[0], Exit);
}
}
}
}
// LCSSA form was updated above for the case where LoopSimplify is
// available, which means that all predecessors of loop exit blocks
// are within the loop. Without LoopSimplify form, it would be
// necessary to insert a new phi.
assert((!P->mustPreserveAnalysisID(LCSSAID) ||
P->mustPreserveAnalysisID(LoopSimplifyID)) &&
"SplitCriticalEdge doesn't know how to update LCCSA form "
"without LoopSimplify!");
}
}
return NewBB;
}
/// SplitCriticalEdge - If this edge is a critical edge, insert a new node to
/// split the critical edge. This will update DominatorTree and
/// DominatorFrontier information if it is available, thus calling this pass
/// will not invalidate either of them. This returns the new block if the edge
/// was split, null otherwise.
///
/// If MergeIdenticalEdges is true (not the default), *all* edges from TI to the
/// specified successor will be merged into the same critical edge block.
/// This is most commonly interesting with switch instructions, which may
/// have many edges to any one destination. This ensures that all edges to that
/// dest go to one block instead of each going to a different block, but isn't
/// the standard definition of a "critical edge".
///
/// It is invalid to call this function on a critical edge that starts at an
/// IndirectBrInst. Splitting these edges will almost always create an invalid
/// program because the address of the new block won't be the one that is jumped
/// to.
///
BasicBlock *llvm::SplitCriticalEdge(TerminatorInst *TI, unsigned SuccNum,
Pass *P, bool MergeIdenticalEdges) {
if (!isCriticalEdge(TI, SuccNum, MergeIdenticalEdges)) return 0;
assert(!isa<IndirectBrInst>(TI) &&
"Cannot split critical edge from IndirectBrInst");
BasicBlock *TIBB = TI->getParent();
BasicBlock *DestBB = TI->getSuccessor(SuccNum);
// Create a new basic block, linking it into the CFG.
BasicBlock *NewBB = BasicBlock::Create(TI->getContext(),
TIBB->getName() + "." + DestBB->getName() + "_crit_edge");
// Create our unconditional branch.
BranchInst::Create(DestBB, NewBB);
// Branch to the new block, breaking the edge.
TI->setSuccessor(SuccNum, NewBB);
// Insert the block into the function... right after the block TI lives in.
Function &F = *TIBB->getParent();
Function::iterator FBBI = TIBB;
F.getBasicBlockList().insert(++FBBI, NewBB);
// If there are any PHI nodes in DestBB, we need to update them so that they
// merge incoming values from NewBB instead of from TIBB.
if (PHINode *APHI = dyn_cast<PHINode>(DestBB->begin())) {
// This conceptually does:
// foreach (PHINode *PN in DestBB)
// PN->setIncomingBlock(PN->getIncomingBlock(TIBB), NewBB);
// but is optimized for two cases.
if (APHI->getNumIncomingValues() <= 8) { // Small # preds case.
unsigned BBIdx = 0;
for (BasicBlock::iterator I = DestBB->begin(); isa<PHINode>(I); ++I) {
// We no longer enter through TIBB, now we come in through NewBB.
// Revector exactly one entry in the PHI node that used to come from
// TIBB to come from NewBB.
PHINode *PN = cast<PHINode>(I);
// Reuse the previous value of BBIdx if it lines up. In cases where we
// have multiple phi nodes with *lots* of predecessors, this is a speed
// win because we don't have to scan the PHI looking for TIBB. This
// happens because the BB list of PHI nodes are usually in the same
// order.
if (PN->getIncomingBlock(BBIdx) != TIBB)
BBIdx = PN->getBasicBlockIndex(TIBB);
PN->setIncomingBlock(BBIdx, NewBB);
}
} else {
// However, the foreach loop is slow for blocks with lots of predecessors
// because PHINode::getIncomingBlock is O(n) in # preds. Instead, walk
// the user list of TIBB to find the PHI nodes.
SmallPtrSet<PHINode*, 16> UpdatedPHIs;
for (Value::use_iterator UI = TIBB->use_begin(), E = TIBB->use_end();
UI != E; ) {
Value::use_iterator Use = UI++;
if (PHINode *PN = dyn_cast<PHINode>(Use)) {
// Remove one entry from each PHI.
if (PN->getParent() == DestBB && UpdatedPHIs.insert(PN))
PN->setOperand(Use.getOperandNo(), NewBB);
}
}
}
}
// If there are any other edges from TIBB to DestBB, update those to go
// through the split block, making those edges non-critical as well (and
// reducing the number of phi entries in the DestBB if relevant).
if (MergeIdenticalEdges) {
for (unsigned i = SuccNum+1, e = TI->getNumSuccessors(); i != e; ++i) {
if (TI->getSuccessor(i) != DestBB) continue;
// Remove an entry for TIBB from DestBB phi nodes.
DestBB->removePredecessor(TIBB);
// We found another edge to DestBB, go to NewBB instead.
TI->setSuccessor(i, NewBB);
}
}
// If we don't have a pass object, we can't update anything...
if (P == 0) return NewBB;
DominatorTree *DT = P->getAnalysisIfAvailable<DominatorTree>();
DominanceFrontier *DF = P->getAnalysisIfAvailable<DominanceFrontier>();
LoopInfo *LI = P->getAnalysisIfAvailable<LoopInfo>();
ProfileInfo *PI = P->getAnalysisIfAvailable<ProfileInfo>();
// If we have nothing to update, just return.
if (DT == 0 && DF == 0 && LI == 0 && PI == 0)
return NewBB;
// Now update analysis information. Since the only predecessor of NewBB is
// the TIBB, TIBB clearly dominates NewBB. TIBB usually doesn't dominate
// anything, as there are other successors of DestBB. However, if all other
// predecessors of DestBB are already dominated by DestBB (e.g. DestBB is a
// loop header) then NewBB dominates DestBB.
SmallVector<BasicBlock*, 8> OtherPreds;
// If there is a PHI in the block, loop over predecessors with it, which is
// faster than iterating pred_begin/end.
if (PHINode *PN = dyn_cast<PHINode>(DestBB->begin())) {
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingBlock(i) != NewBB)
OtherPreds.push_back(PN->getIncomingBlock(i));
} else {
for (pred_iterator I = pred_begin(DestBB), E = pred_end(DestBB);
I != E; ++I)
if (*I != NewBB)
OtherPreds.push_back(*I);
}
bool NewBBDominatesDestBB = true;
// Should we update DominatorTree information?
if (DT) {
DomTreeNode *TINode = DT->getNode(TIBB);
// The new block is not the immediate dominator for any other nodes, but
// TINode is the immediate dominator for the new node.
//
if (TINode) { // Don't break unreachable code!
DomTreeNode *NewBBNode = DT->addNewBlock(NewBB, TIBB);
DomTreeNode *DestBBNode = 0;
// If NewBBDominatesDestBB hasn't been computed yet, do so with DT.
if (!OtherPreds.empty()) {
DestBBNode = DT->getNode(DestBB);
while (!OtherPreds.empty() && NewBBDominatesDestBB) {
if (DomTreeNode *OPNode = DT->getNode(OtherPreds.back()))
NewBBDominatesDestBB = DT->dominates(DestBBNode, OPNode);
OtherPreds.pop_back();
}
OtherPreds.clear();
}
// If NewBBDominatesDestBB, then NewBB dominates DestBB, otherwise it
// doesn't dominate anything.
if (NewBBDominatesDestBB) {
if (!DestBBNode) DestBBNode = DT->getNode(DestBB);
DT->changeImmediateDominator(DestBBNode, NewBBNode);
}
}
}
// Should we update DominanceFrontier information?
if (DF) {
// If NewBBDominatesDestBB hasn't been computed yet, do so with DF.
if (!OtherPreds.empty()) {
// FIXME: IMPLEMENT THIS!
llvm_unreachable("Requiring domfrontiers but not idom/domtree/domset."
" not implemented yet!");
}
// Since the new block is dominated by its only predecessor TIBB,
// it cannot be in any block's dominance frontier. If NewBB dominates
// DestBB, its dominance frontier is the same as DestBB's, otherwise it is
// just {DestBB}.
DominanceFrontier::DomSetType NewDFSet;
if (NewBBDominatesDestBB) {
DominanceFrontier::iterator I = DF->find(DestBB);
if (I != DF->end()) {
DF->addBasicBlock(NewBB, I->second);
if (I->second.count(DestBB)) {
// However NewBB's frontier does not include DestBB.
DominanceFrontier::iterator NF = DF->find(NewBB);
DF->removeFromFrontier(NF, DestBB);
}
}
else
DF->addBasicBlock(NewBB, DominanceFrontier::DomSetType());
} else {
DominanceFrontier::DomSetType NewDFSet;
NewDFSet.insert(DestBB);
DF->addBasicBlock(NewBB, NewDFSet);
}
}
// Update LoopInfo if it is around.
if (LI) {
if (Loop *TIL = LI->getLoopFor(TIBB)) {
// If one or the other blocks were not in a loop, the new block is not
// either, and thus LI doesn't need to be updated.
if (Loop *DestLoop = LI->getLoopFor(DestBB)) {
if (TIL == DestLoop) {
// Both in the same loop, the NewBB joins loop.
DestLoop->addBasicBlockToLoop(NewBB, LI->getBase());
} else if (TIL->contains(DestLoop)) {
// Edge from an outer loop to an inner loop. Add to the outer loop.
TIL->addBasicBlockToLoop(NewBB, LI->getBase());
} else if (DestLoop->contains(TIL)) {
// Edge from an inner loop to an outer loop. Add to the outer loop.
DestLoop->addBasicBlockToLoop(NewBB, LI->getBase());
} else {
// Edge from two loops with no containment relation. Because these
// are natural loops, we know that the destination block must be the
// header of its loop (adding a branch into a loop elsewhere would
// create an irreducible loop).
assert(DestLoop->getHeader() == DestBB &&
"Should not create irreducible loops!");
if (Loop *P = DestLoop->getParentLoop())
P->addBasicBlockToLoop(NewBB, LI->getBase());
}
}
// If TIBB is in a loop and DestBB is outside of that loop, split the
// other exit blocks of the loop that also have predecessors outside
// the loop, to maintain a LoopSimplify guarantee.
if (!TIL->contains(DestBB) &&
P->mustPreserveAnalysisID(LoopSimplifyID)) {
assert(!TIL->contains(NewBB) &&
"Split point for loop exit is contained in loop!");
// Update LCSSA form in the newly created exit block.
if (P->mustPreserveAnalysisID(LCSSAID)) {
SmallVector<BasicBlock *, 1> OrigPred;
OrigPred.push_back(TIBB);
CreatePHIsForSplitLoopExit(OrigPred, NewBB, DestBB);
}
// For each unique exit block...
SmallVector<BasicBlock *, 4> ExitBlocks;
TIL->getExitBlocks(ExitBlocks);
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
// Collect all the preds that are inside the loop, and note
// whether there are any preds outside the loop.
SmallVector<BasicBlock *, 4> Preds;
bool HasPredOutsideOfLoop = false;
BasicBlock *Exit = ExitBlocks[i];
for (pred_iterator I = pred_begin(Exit), E = pred_end(Exit);
I != E; ++I)
if (TIL->contains(*I))
Preds.push_back(*I);
else
HasPredOutsideOfLoop = true;
// If there are any preds not in the loop, we'll need to split
// the edges. The Preds.empty() check is needed because a block
// may appear multiple times in the list. We can't use
// getUniqueExitBlocks above because that depends on LoopSimplify
// form, which we're in the process of restoring!
if (!Preds.empty() && HasPredOutsideOfLoop) {
BasicBlock *NewExitBB =
SplitBlockPredecessors(Exit, Preds.data(), Preds.size(),
"split", P);
if (P->mustPreserveAnalysisID(LCSSAID))
CreatePHIsForSplitLoopExit(Preds, NewExitBB, Exit);
}
}
}
// LCSSA form was updated above for the case where LoopSimplify is
// available, which means that all predecessors of loop exit blocks
// are within the loop. Without LoopSimplify form, it would be
// necessary to insert a new phi.
assert((!P->mustPreserveAnalysisID(LCSSAID) ||
P->mustPreserveAnalysisID(LoopSimplifyID)) &&
"SplitCriticalEdge doesn't know how to update LCCSA form "
"without LoopSimplify!");
}
}
// Update ProfileInfo if it is around.
if (PI)
PI->splitEdge(TIBB, DestBB, NewBB, MergeIdenticalEdges);
return NewBB;
}
std::pair<polly::BBPair, BranchInst *>
polly::executeScopConditionally(Scop &S, Value *RTC, DominatorTree &DT,
RegionInfo &RI, LoopInfo &LI) {
Region &R = S.getRegion();
PollyIRBuilder Builder(S.getEntry());
// Before:
//
// \ / //
// EnteringBB //
// _____|_____ //
// / EntryBB \ //
// | (region) | //
// \_ExitingBB_/ //
// | //
// ExitBB //
// / \ //
// Create a fork block.
BasicBlock *EnteringBB = S.getEnteringBlock();
BasicBlock *EntryBB = S.getEntry();
assert(EnteringBB && "Must be a simple region");
BasicBlock *SplitBlock =
splitEdge(EnteringBB, EntryBB, ".split_new_and_old", &DT, &LI, &RI);
SplitBlock->setName("polly.split_new_and_old");
// If EntryBB is the exit block of the region that includes Prev, exclude
// SplitBlock from that region by making it itself the exit block. This is
// trivially possible because there is just one edge to EnteringBB.
// This is necessary because we will add an outgoing edge from SplitBlock,
// which would violate the single exit block requirement of PrevRegion.
Region *PrevRegion = RI.getRegionFor(EnteringBB);
while (PrevRegion->getExit() == EntryBB) {
PrevRegion->replaceExit(SplitBlock);
PrevRegion = PrevRegion->getParent();
}
RI.setRegionFor(SplitBlock, PrevRegion);
// Create a join block
BasicBlock *ExitingBB = S.getExitingBlock();
BasicBlock *ExitBB = S.getExit();
assert(ExitingBB && "Must be a simple region");
BasicBlock *MergeBlock =
splitEdge(ExitingBB, ExitBB, ".merge_new_and_old", &DT, &LI, &RI);
MergeBlock->setName("polly.merge_new_and_old");
// Exclude the join block from the region.
R.replaceExitRecursive(MergeBlock);
RI.setRegionFor(MergeBlock, R.getParent());
// \ / //
// EnteringBB //
// | //
// SplitBlock //
// _____|_____ //
// / EntryBB \ //
// | (region) | //
// \_ExitingBB_/ //
// | //
// MergeBlock //
// | //
// ExitBB //
// / \ //
// Create the start and exiting block.
Function *F = SplitBlock->getParent();
BasicBlock *StartBlock =
BasicBlock::Create(F->getContext(), "polly.start", F);
BasicBlock *ExitingBlock =
BasicBlock::Create(F->getContext(), "polly.exiting", F);
SplitBlock->getTerminator()->eraseFromParent();
Builder.SetInsertPoint(SplitBlock);
BranchInst *CondBr = Builder.CreateCondBr(RTC, StartBlock, S.getEntry());
if (Loop *L = LI.getLoopFor(SplitBlock)) {
L->addBasicBlockToLoop(StartBlock, LI);
L->addBasicBlockToLoop(ExitingBlock, LI);
}
DT.addNewBlock(StartBlock, SplitBlock);
DT.addNewBlock(ExitingBlock, StartBlock);
RI.setRegionFor(StartBlock, RI.getRegionFor(SplitBlock));
RI.setRegionFor(ExitingBlock, RI.getRegionFor(SplitBlock));
// \ / //
// EnteringBB //
// | //
// SplitBlock---------\ //
// _____|_____ | //
// / EntryBB \ StartBlock //
// | (region) | | //
// \_ExitingBB_/ ExitingBlock //
// | //
// MergeBlock //
// | //
// ExitBB //
// / \ //
// Connect start block to exiting block.
Builder.SetInsertPoint(StartBlock);
Builder.CreateBr(ExitingBlock);
DT.changeImmediateDominator(ExitingBlock, StartBlock);
// Connect exiting block to join block.
Builder.SetInsertPoint(ExitingBlock);
Builder.CreateBr(MergeBlock);
DT.changeImmediateDominator(MergeBlock, SplitBlock);
// \ / //
// EnteringBB //
// | //
// SplitBlock---------\ //
// _____|_____ | //
// / EntryBB \ StartBlock //
// | (region) | | //
// \_ExitingBB_/ ExitingBlock //
// | | //
// MergeBlock---------/ //
// | //
// ExitBB //
// / \ //
//
// Split the edge between SplitBlock and EntryBB, to avoid a critical edge.
splitEdge(SplitBlock, EntryBB, ".pre_entry_bb", &DT, &LI, &RI);
// \ / //
// EnteringBB //
// | //
// SplitBlock---------\ //
// | | //
// PreEntryBB | //
// _____|_____ | //
// / EntryBB \ StartBlock //
// | (region) | | //
// \_ExitingBB_/ ExitingBlock //
// | | //
// MergeBlock---------/ //
// | //
// ExitBB //
// / \ //
return std::make_pair(std::make_pair(StartBlock, ExitingBlock), CondBr);
}
