void MODULE::MoveAnchorPosition( const wxPoint& aMoveVector )
{
/* Move the reference point of the footprint
* the footprints elements (pads, outlines, edges .. ) are moved
* but:
* - the footprint position is not modified.
* - the relative (local) coordinates of these items are modified
*/
wxPoint footprintPos = GetPosition();
/* Update the relative coordinates:
* The coordinates are relative to the anchor point.
* Calculate deltaX and deltaY from the anchor. */
wxPoint moveVector = aMoveVector;
RotatePoint( &moveVector, -GetOrientation() );
// Update of the reference and value.
m_Reference->SetPos0( m_Reference->GetPos0() + moveVector );
m_Reference->SetDrawCoord();
m_Value->SetPos0( m_Value->GetPos0() + moveVector );
m_Value->SetDrawCoord();
// Update the pad local coordinates.
for( D_PAD* pad = Pads(); pad; pad = pad->Next() )
{
pad->SetPos0( pad->GetPos0() + moveVector );
pad->SetPosition( pad->GetPos0() + footprintPos );
}
// Update the draw element coordinates.
for( EDA_ITEM* item = GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( item );
edge->m_Start0 += moveVector;
edge->m_End0 += moveVector;
edge->SetDrawCoord();
break;
}
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( item );
text->SetPos0( text->GetPos0() + moveVector );
text->SetDrawCoord();
break;
}
default:
break;
}
}
CalculateBoundingBox();
}
void MODULE::SetOrientation( double newangle )
{
double angleChange = newangle - m_Orient; // change in rotation
wxPoint pt;
NORMALIZE_ANGLE_POS( newangle );
m_Orient = newangle;
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
pt = pad->GetPos0();
pad->SetOrientation( pad->GetOrientation() + angleChange );
RotatePoint( &pt, m_Orient );
pad->SetPosition( GetPosition() + pt );
}
// Update of the reference and value.
m_Reference->SetDrawCoord();
m_Value->SetDrawCoord();
// Displace contours and text of the footprint.
for( BOARD_ITEM* item = m_Drawings; item; item = item->Next() )
{
if( item->Type() == PCB_MODULE_EDGE_T )
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
edge->SetDrawCoord();
}
else if( item->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = (TEXTE_MODULE*) item;
text->SetDrawCoord();
}
}
CalculateBoundingBox();
}
void PCB_POLYGON::AddToModule( MODULE* aModule )
{
if( IsNonCopperLayer( m_KiCadLayer ) )
{
EDGE_MODULE* dwg = new EDGE_MODULE( aModule, S_POLYGON );
aModule->GraphicalItemsList().PushBack( dwg );
dwg->SetWidth( 0 );
dwg->SetLayer( m_KiCadLayer );
auto outline = new std::vector<wxPoint>;
for( auto point : m_outline )
outline->push_back( wxPoint( point->x, point->y ) );
dwg->SetPolyPoints( *outline );
dwg->SetStart0( *outline->begin() );
dwg->SetEnd0( outline->back() );
dwg->SetDrawCoord();
delete( outline );
}
}
MODULE* GPCB_FPL_CACHE::parseMODULE( LINE_READER* aLineReader ) throw( IO_ERROR, PARSE_ERROR )
{
#define TEXT_DEFAULT_SIZE ( 40*IU_PER_MILS )
#define OLD_GPCB_UNIT_CONV IU_PER_MILS
// Old version unit = 1 mil, so conv_unit is 10 or 0.1
#define NEW_GPCB_UNIT_CONV ( 0.01*IU_PER_MILS )
int paramCnt;
double conv_unit = NEW_GPCB_UNIT_CONV; // GPCB unit = 0.01 mils and Pcbnew 0.1
wxPoint textPos;
wxString msg;
wxArrayString parameters;
std::auto_ptr<MODULE> module( new MODULE( NULL ) );
if( aLineReader->ReadLine() == NULL )
THROW_IO_ERROR( "unexpected end of file" );
parameters.Clear();
parseParameters( parameters, aLineReader );
paramCnt = parameters.GetCount();
/* From the Geda PCB documentation, valid Element definitions:
* Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
* Element (NFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TNFlags)
* Element (NFlags "Desc" "Name" "Value" TX TY TDir TScale TNFlags)
* Element (NFlags "Desc" "Name" TX TY TDir TScale TNFlags)
* Element ("Desc" "Name" TX TY TDir TScale TNFlags)
*/
if( parameters[0].CmpNoCase( wxT( "Element" ) ) != 0 )
{
msg.Printf( _( "unknown token \"%s\"" ), GetChars( parameters[0] ) );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
if( paramCnt < 10 || paramCnt > 14 )
{
msg.Printf( _( "Element token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
// Test symbol after "Element": if [ units = 0.01 mils, and if ( units = 1 mil
if( parameters[1] == wxT( "(" ) )
conv_unit = OLD_GPCB_UNIT_CONV;
if( paramCnt > 10 )
{
module->SetDescription( parameters[3] );
module->SetReference( parameters[4] );
}
else
{
module->SetDescription( parameters[2] );
module->SetReference( parameters[3] );
}
// Read value
if( paramCnt > 10 )
module->SetValue( parameters[5] );
// With gEDA/pcb, value is meaningful after instantiation, only, so it's
// often empty in bare footprints.
if( module->Value().GetText().IsEmpty() )
module->Value().SetText( wxT( "Val**" ) );
if( paramCnt == 14 )
{
textPos = wxPoint( parseInt( parameters[8], conv_unit ),
parseInt( parameters[9], conv_unit ) );
}
else
{
textPos = wxPoint( parseInt( parameters[6], conv_unit ),
parseInt( parameters[7], conv_unit ) );
}
int orientation = parseInt( parameters[paramCnt-4], 1.0 );
module->Reference().SetOrientation( (orientation % 2) ? 900 : 0 );
// Calculate size: default height is 40 mils, width 30 mil.
// real size is: default * ibuf[idx+3] / 100 (size in gpcb is given in percent of default size
int thsize = parseInt( parameters[paramCnt-3], TEXT_DEFAULT_SIZE ) / 100;
thsize = std::max( (int)( 5 * IU_PER_MILS ), thsize ); // Ensure a minimal size = 5 mils
int twsize = thsize * 30 / 40;
int thickness = thsize / 8;
// gEDA/pcb aligns top/left, not pcbnew's default, center/center.
// Compensate for this by shifting the insertion point instead of the
// aligment, because alignment isn't changeable in the GUI.
textPos.x = textPos.x + twsize * module->GetReference().Len() / 2;
textPos.y += thsize / 2;
// gEDA/pcb draws a bit too low/left, while pcbnew draws a bit too
// high/right. Compensate for similar appearance.
textPos.x -= thsize / 10;
textPos.y += thsize / 2;
module->Reference().SetTextPosition( textPos );
module->Reference().SetPos0( textPos );
module->Reference().SetSize( wxSize( twsize, thsize ) );
module->Reference().SetThickness( thickness );
// gEDA/pcb shows only one of value/reference/description at a time. Which
// one is selectable by a global menu setting. pcbnew needs reference as
// well as value visible, so place the value right below the reference.
module->Value().SetOrientation( module->Reference().GetOrientation() );
module->Value().SetSize( module->Reference().GetSize() );
module->Value().SetThickness( module->Reference().GetThickness() );
textPos.y += thsize * 13 / 10; // 130% line height
module->Value().SetTextPosition( textPos );
module->Value().SetPos0( textPos );
while( aLineReader->ReadLine() )
{
parameters.Clear();
parseParameters( parameters, aLineReader );
if( parameters.IsEmpty() || parameters[0] == wxT( "(" ) )
continue;
if( parameters[0] == wxT( ")" ) )
break;
paramCnt = parameters.GetCount();
// Test units value for a string line param (more than 3 parameters : ident [ xx ] )
if( paramCnt > 3 )
{
if( parameters[1] == wxT( "(" ) )
conv_unit = OLD_GPCB_UNIT_CONV;
else
conv_unit = NEW_GPCB_UNIT_CONV;
}
wxLogTrace( traceFootprintLibrary, wxT( "%s parameter count = %d." ),
GetChars( parameters[0] ), paramCnt );
// Parse a line with format: ElementLine [X1 Y1 X2 Y2 Thickness]
if( parameters[0].CmpNoCase( wxT( "ElementLine" ) ) == 0 )
{
if( paramCnt != 8 )
{
msg.Printf( wxT( "ElementLine token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
EDGE_MODULE* drawSeg = new EDGE_MODULE( module.get() );
drawSeg->SetLayer( F_SilkS );
drawSeg->SetShape( S_SEGMENT );
drawSeg->SetStart0( wxPoint( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) ) );
drawSeg->SetEnd0( wxPoint( parseInt( parameters[4], conv_unit ),
parseInt( parameters[5], conv_unit ) ) );
drawSeg->SetWidth( parseInt( parameters[6], conv_unit ) );
drawSeg->SetDrawCoord();
module->GraphicalItems().PushBack( drawSeg );
continue;
}
// Parse an arc with format: ElementArc [X Y Width Height StartAngle DeltaAngle Thickness]
if( parameters[0].CmpNoCase( wxT( "ElementArc" ) ) == 0 )
{
if( paramCnt != 10 )
{
msg.Printf( wxT( "ElementArc token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
// Pcbnew does know ellipse so we must have Width = Height
EDGE_MODULE* drawSeg = new EDGE_MODULE( module.get() );
drawSeg->SetLayer( F_SilkS );
drawSeg->SetShape( S_ARC );
module->GraphicalItems().PushBack( drawSeg );
// for and arc: ibuf[3] = ibuf[4]. Pcbnew does not know ellipses
int radius = ( parseInt( parameters[4], conv_unit ) +
parseInt( parameters[5], conv_unit ) ) / 2;
wxPoint centre( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) );
drawSeg->SetStart0( centre );
// Pcbnew start angles are inverted and 180 degrees from Geda PCB angles.
double start_angle = parseInt( parameters[6], -10.0 ) + 1800.0;
// Pcbnew delta angle direction is the opposite of Geda PCB delta angles.
double sweep_angle = parseInt( parameters[7], -10.0 );
// Geda PCB does not support circles.
if( sweep_angle == -3600.0 )
drawSeg->SetShape( S_CIRCLE );
// Angle value is clockwise in gpcb and Pcbnew.
drawSeg->SetAngle( sweep_angle );
drawSeg->SetEnd0( wxPoint( radius, 0 ) );
// Calculate start point coordinate of arc
wxPoint arcStart( drawSeg->GetEnd0() );
RotatePoint( &arcStart, -start_angle );
drawSeg->SetEnd0( centre + arcStart );
drawSeg->SetWidth( parseInt( parameters[8], conv_unit ) );
drawSeg->SetDrawCoord();
continue;
}
// Parse a Pad with no hole with format:
// Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]
// Pad (rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" NFlags)
// Pad (aX1 aY1 aX2 aY2 Thickness "Name" "Number" NFlags)
// Pad (aX1 aY1 aX2 aY2 Thickness "Name" NFlags)
if( parameters[0].CmpNoCase( wxT( "Pad" ) ) == 0 )
{
if( paramCnt < 10 || paramCnt > 13 )
{
msg.Printf( wxT( "Pad token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
D_PAD* pad = new D_PAD( module.get() );
static const LSET pad_front( 3, F_Cu, F_Mask, F_Paste );
static const LSET pad_back( 3, B_Cu, B_Mask, B_Paste );
pad->SetShape( PAD_SHAPE_RECT );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetLayerSet( pad_front );
if( testFlags( parameters[paramCnt-2], 0x0080, wxT( "onsolder" ) ) )
pad->SetLayerSet( pad_back );
// Set the pad name:
// Pcbnew pad name is used for electrical connection calculations.
// Accordingly it should be mapped to gEDA's pin/pad number,
// which is used for the same purpose.
// gEDA also features a pin/pad "name", which is an arbitrary string
// and set to the pin name of the netlist on instantiation. Many gEDA
// bare footprints use identical strings for name and number, so this
// can be a bit confusing.
pad->SetPadName( parameters[paramCnt-3] );
int x1 = parseInt( parameters[2], conv_unit );
int x2 = parseInt( parameters[4], conv_unit );
int y1 = parseInt( parameters[3], conv_unit );
int y2 = parseInt( parameters[5], conv_unit );
int width = parseInt( parameters[6], conv_unit );
wxPoint delta( x2 - x1, y2 - y1 );
double angle = atan2( (double)delta.y, (double)delta.x );
// Get the pad clearance and the solder mask clearance.
if( paramCnt == 13 )
{
int clearance = parseInt( parameters[7], conv_unit );
// One of gEDA's oddities is that clearance between pad and polygon
// is given as the gap on both sides of the pad together, so for
// KiCad it has to halfed.
pad->SetLocalClearance( clearance / 2 );
// In GEDA, the mask value is the size of the hole in this
// solder mask. In Pcbnew, it is a margin, therefore the distance
// between the copper and the mask
int maskMargin = parseInt( parameters[8], conv_unit );
maskMargin = ( maskMargin - width ) / 2;
pad->SetLocalSolderMaskMargin( maskMargin );
}
// Negate angle (due to Y reversed axis) and convert it to internal units
angle = - RAD2DECIDEG( angle );
pad->SetOrientation( KiROUND( angle ) );
wxPoint padPos( (x1 + x2) / 2, (y1 + y2) / 2 );
pad->SetSize( wxSize( KiROUND( EuclideanNorm( delta ) ) + width,
width ) );
padPos += module->GetPosition();
pad->SetPos0( padPos );
pad->SetPosition( padPos );
if( !testFlags( parameters[paramCnt-2], 0x0100, wxT( "square" ) ) )
{
if( pad->GetSize().x == pad->GetSize().y )
pad->SetShape( PAD_SHAPE_CIRCLE );
else
pad->SetShape( PAD_SHAPE_OVAL );
}
module->Add( pad );
continue;
}
// Parse a Pin with through hole with format:
// Pin [rX rY Thickness Clearance Mask Drill "Name" "Number" SFlags]
// Pin (rX rY Thickness Clearance Mask Drill "Name" "Number" NFlags)
// Pin (aX aY Thickness Drill "Name" "Number" NFlags)
// Pin (aX aY Thickness Drill "Name" NFlags)
// Pin (aX aY Thickness "Name" NFlags)
if( parameters[0].CmpNoCase( wxT( "Pin" ) ) == 0 )
{
if( paramCnt < 8 || paramCnt > 12 )
{
msg.Printf( wxT( "Pin token contains %d parameters." ), paramCnt );
THROW_PARSE_ERROR( msg, aLineReader->GetSource(), (const char *)aLineReader,
aLineReader->LineNumber(), 0 );
}
D_PAD* pad = new D_PAD( module.get() );
pad->SetShape( PAD_SHAPE_CIRCLE );
static const LSET pad_set = LSET::AllCuMask() | LSET( 3, F_SilkS, F_Mask, B_Mask );
pad->SetLayerSet( pad_set );
if( testFlags( parameters[paramCnt-2], 0x0100, wxT( "square" ) ) )
pad->SetShape( PAD_SHAPE_RECT );
// Set the pad name:
// Pcbnew pad name is used for electrical connection calculations.
// Accordingly it should be mapped to gEDA's pin/pad number,
// which is used for the same purpose.
pad->SetPadName( parameters[paramCnt-3] );
wxPoint padPos( parseInt( parameters[2], conv_unit ),
parseInt( parameters[3], conv_unit ) );
int padSize = parseInt( parameters[4], conv_unit );
pad->SetSize( wxSize( padSize, padSize ) );
int drillSize = 0;
// Get the pad clearance, solder mask clearance, and drill size.
if( paramCnt == 12 )
{
int clearance = parseInt( parameters[5], conv_unit );
// One of gEDA's oddities is that clearance between pad and polygon
// is given as the gap on both sides of the pad together, so for
// KiCad it has to halfed.
pad->SetLocalClearance( clearance / 2 );
// In GEDA, the mask value is the size of the hole in this
// solder mask. In Pcbnew, it is a margin, therefore the distance
// between the copper and the mask
int maskMargin = parseInt( parameters[6], conv_unit );
maskMargin = ( maskMargin - padSize ) / 2;
pad->SetLocalSolderMaskMargin( maskMargin );
drillSize = parseInt( parameters[7], conv_unit );
}
else
{
drillSize = parseInt( parameters[5], conv_unit );
}
pad->SetDrillSize( wxSize( drillSize, drillSize ) );
padPos += module->GetPosition();
pad->SetPos0( padPos );
pad->SetPosition( padPos );
if( pad->GetShape() == PAD_SHAPE_CIRCLE && pad->GetSize().x != pad->GetSize().y )
pad->SetShape( PAD_SHAPE_OVAL );
module->Add( pad );
continue;
}
}
// Recalculate the bounding box
module->CalculateBoundingBox();
return module.release();
}
