/**
This function processes the results of changes in configuration.
@param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param Configuration A null-terminated Unicode string in <ConfigResp> format.
@param Progress A pointer to a string filled in with the offset of the most
recent '&' before the first failing name/value pair (or the
beginning of the string if the failure is in the first
name/value pair) or the terminating NULL if all was successful.
@retval EFI_SUCCESS The Results is processed successfully.
@retval EFI_INVALID_PARAMETER Configuration is NULL.
@retval EFI_NOT_FOUND Routing data doesn't match any storage in this driver.
**/
EFI_STATUS
EFIAPI
LegacyBootOptionRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
EFI_STATUS Status;
EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
LEGACY_BOOT_NV_DATA *CurrentNVMapData;
UINTN BufferSize;
if (Configuration == NULL || Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in <ConfigHdr>.
// Note: there is no name for Name/Value storage, only GUID will be checked
//
if (!HiiIsConfigHdrMatch (Configuration, &mLegacyBootOptionGuid, mLegacyBootStorageName)) {
return EFI_NOT_FOUND;
}
Status = gBS->LocateProtocol (
&gEfiHiiConfigRoutingProtocolGuid,
NULL,
(VOID **) &ConfigRouting
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
//
CurrentNVMapData = &mLegacyBootOptionPrivate->MaintainMapData->CurrentNvData;
Status = ConfigRouting->ConfigToBlock (
ConfigRouting,
Configuration,
(UINT8 *) CurrentNVMapData,
&BufferSize,
Progress
);
ASSERT_EFI_ERROR (Status);
Status = UpdateBBSOption (CurrentNVMapData);
return Status;
}
/**
This function applies changes in a driver's configuration.
Input is a Configuration, which has the routing data for this
driver followed by name / value configuration pairs. The driver
must apply those pairs to its configurable storage. If the
driver's configuration is stored in a linear block of data
and the driver's name / value pairs are in <BlockConfig>
format, it may use the ConfigToBlock helper function (above) to
simplify the job. Currently not implemented.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Configuration A null-terminated Unicode string in
<ConfigString> format.
@param[out] Progress A pointer to a string filled in with the
offset of the most recent '&' before the
first failing name / value pair (or the
beginn ing of the string if the failure
is in the first name / value pair) or
the terminating NULL if all was
successful.
@retval EFI_SUCCESS The results have been distributed or are
awaiting distribution.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETERS Passing in a NULL for the
Results parameter would result
in this type of error.
@retval EFI_NOT_FOUND Target for the specified routing data
was not found.
**/
EFI_STATUS
EFIAPI
BootMaintRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
EFI_STATUS Status;
UINTN BufferSize;
EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
BMM_FAKE_NV_DATA *NewBmmData;
BMM_FAKE_NV_DATA *OldBmmData;
BM_MENU_ENTRY *NewMenuEntry;
BM_LOAD_CONTEXT *NewLoadContext;
UINT16 Index;
BMM_CALLBACK_DATA *Private;
if (Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
*Progress = Configuration;
if (Configuration == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in <ConfigHdr>.
// Note: there is no name for Name/Value storage, only GUID will be checked
//
if (!HiiIsConfigHdrMatch (Configuration, &mBootMaintGuid, mBootMaintStorageName)) {
return EFI_NOT_FOUND;
}
Status = gBS->LocateProtocol (
&gEfiHiiConfigRoutingProtocolGuid,
NULL,
(VOID **)&ConfigRouting
);
if (EFI_ERROR (Status)) {
return Status;
}
Private = BMM_CALLBACK_DATA_FROM_THIS (This);
//
// Get Buffer Storage data from EFI variable
//
BufferSize = sizeof (BMM_FAKE_NV_DATA);
OldBmmData = &Private->BmmOldFakeNVData;
NewBmmData = &Private->BmmFakeNvData;
//
// Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
//
Status = ConfigRouting->ConfigToBlock (
ConfigRouting,
Configuration,
(UINT8 *) NewBmmData,
&BufferSize,
Progress
);
ASSERT_EFI_ERROR (Status);
//
// Compare new and old BMM configuration data and only do action for modified item to
// avoid setting unnecessary non-volatile variable
//
//
// Check data which located in BMM main page and save the settings if need
//
if (CompareMem (&NewBmmData->BootNext, &OldBmmData->BootNext, sizeof (NewBmmData->BootNext)) != 0) {
Status = Var_UpdateBootNext (Private);
}
//
// Check data which located in Boot Options Menu and save the settings if need
//
if (CompareMem (NewBmmData->BootOptionDel, OldBmmData->BootOptionDel, sizeof (NewBmmData->BootOptionDel)) != 0) {
for (Index = 0;
((Index < BootOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->BootOptionDel) / sizeof (NewBmmData->BootOptionDel[0]))));
Index ++) {
NewMenuEntry = BOpt_GetMenuEntry (&BootOptionMenu, Index);
NewLoadContext = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
NewLoadContext->Deleted = NewBmmData->BootOptionDel[Index];
NewBmmData->BootOptionDel[Index] = FALSE;
}
Var_DelBootOption ();
}
if (CompareMem (NewBmmData->BootOptionOrder, OldBmmData->BootOptionOrder, sizeof (NewBmmData->BootOptionOrder)) != 0) {
Status = Var_UpdateBootOrder (Private);
}
//
// Check data which located in Driver Options Menu and save the settings if need
//
if (CompareMem (NewBmmData->DriverOptionDel, OldBmmData->DriverOptionDel, sizeof (NewBmmData->DriverOptionDel)) != 0) {
for (Index = 0;
((Index < DriverOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->DriverOptionDel) / sizeof (NewBmmData->DriverOptionDel[0]))));
Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&DriverOptionMenu, Index);
NewLoadContext = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
NewLoadContext->Deleted = NewBmmData->DriverOptionDel[Index];
NewBmmData->DriverOptionDel[Index] = FALSE;
}
Var_DelDriverOption ();
}
if (CompareMem (NewBmmData->DriverOptionOrder, OldBmmData->DriverOptionOrder, sizeof (NewBmmData->DriverOptionOrder)) != 0) {
Status = Var_UpdateDriverOrder (Private);
}
//
// After user do the save action, need to update OldBmmData.
//
CopyMem (OldBmmData, NewBmmData, sizeof (BMM_FAKE_NV_DATA));
return EFI_SUCCESS;
}
/**
This function applies changes in a driver's configuration.
Input is a Configuration, which has the routing data for this
driver followed by name / value configuration pairs. The driver
must apply those pairs to its configurable storage. If the
driver's configuration is stored in a linear block of data
and the driver's name / value pairs are in <BlockConfig>
format, it may use the ConfigToBlock helper function (above) to
simplify the job. Currently not implemented.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Configuration A null-terminated Unicode string in
<ConfigString> format.
@param[out] Progress A pointer to a string filled in with the
offset of the most recent '&' before the
first failing name / value pair (or the
beginn ing of the string if the failure
is in the first name / value pair) or
the terminating NULL if all was
successful.
@retval EFI_SUCCESS The results have been distributed or are
awaiting distribution.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETERS Passing in a NULL for the
Results parameter would result
in this type of error.
@retval EFI_NOT_FOUND Target for the specified routing data
was not found.
**/
EFI_STATUS
EFIAPI
FileExplorerRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
EFI_STATUS Status;
UINTN BufferSize;
EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
FILE_EXPLORER_NV_DATA *FeData;
BMM_CALLBACK_DATA *Private;
if (Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
*Progress = Configuration;
if (Configuration == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in <ConfigHdr>.
// Note: there is no name for Name/Value storage, only GUID will be checked
//
if (!HiiIsConfigHdrMatch (Configuration, &gFileExploreFormSetGuid, mFileExplorerStorageName)) {
return EFI_NOT_FOUND;
}
Status = gBS->LocateProtocol (
&gEfiHiiConfigRoutingProtocolGuid,
NULL,
(VOID**) &ConfigRouting
);
if (EFI_ERROR (Status)) {
return Status;
}
Private = FE_CALLBACK_DATA_FROM_THIS (This);
//
// Get Buffer Storage data from EFI variable
//
BufferSize = sizeof (FILE_EXPLORER_NV_DATA );
FeData = &Private->FeFakeNvData;
//
// Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
//
Status = ConfigRouting->ConfigToBlock (
ConfigRouting,
Configuration,
(UINT8 *) FeData,
&BufferSize,
Progress
);
ASSERT_EFI_ERROR (Status);
if (FeData->BootDescriptionData[0] != 0x00 || FeData->BootOptionalData[0] != 0x00) {
Status = Var_UpdateBootOption (Private, FeData);
if (EFI_ERROR (Status)) {
return Status;
}
BOpt_GetBootOptions (Private);
CreateMenuStringToken (Private, Private->FeHiiHandle, &BootOptionMenu);
}
if (FeData->DriverDescriptionData[0] != 0x00 || FeData->DriverOptionalData[0] != 0x00) {
Status = Var_UpdateDriverOption (
Private,
Private->FeHiiHandle,
FeData->DriverDescriptionData,
FeData->DriverOptionalData,
FeData->ForceReconnect
);
if (EFI_ERROR (Status)) {
return Status;
}
BOpt_GetDriverOptions (Private);
CreateMenuStringToken (Private, Private->FeHiiHandle, &DriverOptionMenu);
}
return EFI_SUCCESS;
}
/**
This function applies changes in a driver's configuration.
Input is a Configuration, which has the routing data for this
driver followed by name / value configuration pairs. The driver
must apply those pairs to its configurable storage. If the
driver's configuration is stored in a linear block of data
and the driver's name / value pairs are in <BlockConfig>
format, it may use the ConfigToBlock helper function (above) to
simplify the job. Currently not implemented.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Configuration A null-terminated Unicode string in
<ConfigString> format.
@param[out] Progress A pointer to a string filled in with the
offset of the most recent '&' before the
first failing name / value pair (or the
beginn ing of the string if the failure
is in the first name / value pair) or
the terminating NULL if all was
successful.
@retval EFI_SUCCESS The results have been distributed or are
awaiting distribution.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETERS Passing in a NULL for the
Results parameter would result
in this type of error.
@retval EFI_NOT_FOUND Target for the specified routing data
was not found.
**/
EFI_STATUS
EFIAPI
BootMaintRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
EFI_STATUS Status;
UINTN BufferSize;
EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
BMM_FAKE_NV_DATA *NewBmmData;
BMM_FAKE_NV_DATA *OldBmmData;
BM_CONSOLE_CONTEXT *NewConsoleContext;
BM_TERMINAL_CONTEXT *NewTerminalContext;
BM_MENU_ENTRY *NewMenuEntry;
BM_LOAD_CONTEXT *NewLoadContext;
UINT16 Index;
BOOLEAN TerminalAttChange;
BMM_CALLBACK_DATA *Private;
if (Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
*Progress = Configuration;
if (Configuration == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in <ConfigHdr>.
// Note: there is no name for Name/Value storage, only GUID will be checked
//
if (!HiiIsConfigHdrMatch (Configuration, &mBootMaintGuid, mBootMaintStorageName)) {
return EFI_NOT_FOUND;
}
Status = gBS->LocateProtocol (
&gEfiHiiConfigRoutingProtocolGuid,
NULL,
(VOID **)&ConfigRouting
);
if (EFI_ERROR (Status)) {
return Status;
}
Private = BMM_CALLBACK_DATA_FROM_THIS (This);
//
// Get Buffer Storage data from EFI variable
//
BufferSize = sizeof (BMM_FAKE_NV_DATA);
OldBmmData = &Private->BmmOldFakeNVData;
NewBmmData = &Private->BmmFakeNvData;
//
// Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
//
Status = ConfigRouting->ConfigToBlock (
ConfigRouting,
Configuration,
(UINT8 *) NewBmmData,
&BufferSize,
Progress
);
ASSERT_EFI_ERROR (Status);
//
// Compare new and old BMM configuration data and only do action for modified item to
// avoid setting unnecessary non-volatile variable
//
//
// Check data which located in BMM main page and save the settings if need
//
if (CompareMem (&NewBmmData->BootNext, &OldBmmData->BootNext, sizeof (NewBmmData->BootNext)) != 0) {
Status = Var_UpdateBootNext (Private);
}
//
// Check data which located in Boot Options Menu and save the settings if need
//
if (CompareMem (NewBmmData->BootOptionDel, OldBmmData->BootOptionDel, sizeof (NewBmmData->BootOptionDel)) != 0) {
for (Index = 0;
((Index < BootOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->BootOptionDel) / sizeof (NewBmmData->BootOptionDel[0]))));
Index ++) {
NewMenuEntry = BOpt_GetMenuEntry (&BootOptionMenu, Index);
NewLoadContext = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
NewLoadContext->Deleted = NewBmmData->BootOptionDel[Index];
NewBmmData->BootOptionDel[Index] = FALSE;
NewBmmData->BootOptionDelMark[Index] = FALSE;
}
Var_DelBootOption ();
}
if (CompareMem (NewBmmData->BootOptionOrder, OldBmmData->BootOptionOrder, sizeof (NewBmmData->BootOptionOrder)) != 0) {
Status = Var_UpdateBootOrder (Private);
}
if (CompareMem (&NewBmmData->BootTimeOut, &OldBmmData->BootTimeOut, sizeof (NewBmmData->BootTimeOut)) != 0){
Status = gRT->SetVariable(
L"Timeout",
&gEfiGlobalVariableGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
sizeof(UINT16),
&(NewBmmData->BootTimeOut)
);
if (EFI_ERROR (Status)) {
//
// If set variable fail, and don't have the appropriate error status for RouteConfig fuction to return,
// just return the EFI_NOT_FOUND.
//
if (Status == EFI_OUT_OF_RESOURCES) {
return Status;
} else {
return EFI_NOT_FOUND;
}
}
Private->BmmOldFakeNVData.BootTimeOut = NewBmmData->BootTimeOut;
}
//
// Check data which located in Driver Options Menu and save the settings if need
//
if (CompareMem (NewBmmData->DriverOptionDel, OldBmmData->DriverOptionDel, sizeof (NewBmmData->DriverOptionDel)) != 0) {
for (Index = 0;
((Index < DriverOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->DriverOptionDel) / sizeof (NewBmmData->DriverOptionDel[0]))));
Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&DriverOptionMenu, Index);
NewLoadContext = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
NewLoadContext->Deleted = NewBmmData->DriverOptionDel[Index];
NewBmmData->DriverOptionDel[Index] = FALSE;
NewBmmData->DriverOptionDelMark[Index] = FALSE;
}
Var_DelDriverOption ();
}
if (CompareMem (NewBmmData->DriverOptionOrder, OldBmmData->DriverOptionOrder, sizeof (NewBmmData->DriverOptionOrder)) != 0) {
Status = Var_UpdateDriverOrder (Private);
}
if (CompareMem (&NewBmmData->ConsoleOutMode, &OldBmmData->ConsoleOutMode, sizeof (NewBmmData->ConsoleOutMode)) != 0){
Var_UpdateConMode(Private);
}
TerminalAttChange = FALSE;
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
//
// only need update modified items
//
if (CompareMem (&NewBmmData->COMBaudRate[Index], &OldBmmData->COMBaudRate[Index], sizeof (NewBmmData->COMBaudRate[Index])) == 0 &&
CompareMem (&NewBmmData->COMDataRate[Index], &OldBmmData->COMDataRate[Index], sizeof (NewBmmData->COMDataRate[Index])) == 0 &&
CompareMem (&NewBmmData->COMStopBits[Index], &OldBmmData->COMStopBits[Index], sizeof (NewBmmData->COMStopBits[Index])) == 0 &&
CompareMem (&NewBmmData->COMParity[Index], &OldBmmData->COMParity[Index], sizeof (NewBmmData->COMParity[Index])) == 0 &&
CompareMem (&NewBmmData->COMTerminalType[Index], &OldBmmData->COMTerminalType[Index], sizeof (NewBmmData->COMTerminalType[Index])) == 0 &&
CompareMem (&NewBmmData->COMFlowControl[Index], &OldBmmData->COMFlowControl[Index], sizeof (NewBmmData->COMFlowControl[Index])) == 0) {
continue;
}
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
ASSERT (NewMenuEntry != NULL);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
NewTerminalContext->BaudRateIndex = NewBmmData->COMBaudRate[Index];
ASSERT (NewBmmData->COMBaudRate[Index] < (sizeof (BaudRateList) / sizeof (BaudRateList[0])));
NewTerminalContext->BaudRate = BaudRateList[NewBmmData->COMBaudRate[Index]].Value;
NewTerminalContext->DataBitsIndex = NewBmmData->COMDataRate[Index];
ASSERT (NewBmmData->COMDataRate[Index] < (sizeof (DataBitsList) / sizeof (DataBitsList[0])));
NewTerminalContext->DataBits = (UINT8) DataBitsList[NewBmmData->COMDataRate[Index]].Value;
NewTerminalContext->StopBitsIndex = NewBmmData->COMStopBits[Index];
ASSERT (NewBmmData->COMStopBits[Index] < (sizeof (StopBitsList) / sizeof (StopBitsList[0])));
NewTerminalContext->StopBits = (UINT8) StopBitsList[NewBmmData->COMStopBits[Index]].Value;
NewTerminalContext->ParityIndex = NewBmmData->COMParity[Index];
ASSERT (NewBmmData->COMParity[Index] < (sizeof (ParityList) / sizeof (ParityList[0])));
NewTerminalContext->Parity = (UINT8) ParityList[NewBmmData->COMParity[Index]].Value;
NewTerminalContext->TerminalType = NewBmmData->COMTerminalType[Index];
NewTerminalContext->FlowControl = NewBmmData->COMFlowControl[Index];
ChangeTerminalDevicePath (
NewTerminalContext->DevicePath,
FALSE
);
TerminalAttChange = TRUE;
}
if (TerminalAttChange) {
Var_UpdateConsoleInpOption ();
Var_UpdateConsoleOutOption ();
Var_UpdateErrorOutOption ();
}
//
// Check data which located in Console Options Menu and save the settings if need
//
if (CompareMem (NewBmmData->ConsoleInCheck, OldBmmData->ConsoleInCheck, sizeof (NewBmmData->ConsoleInCheck)) != 0){
for (Index = 0; Index < ConsoleInpMenu.MenuNumber; Index++){
NewMenuEntry = BOpt_GetMenuEntry(&ConsoleInpMenu, Index);
NewConsoleContext = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
ASSERT (Index < MAX_MENU_NUMBER);
NewConsoleContext->IsActive = NewBmmData->ConsoleInCheck[Index];
}
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
ASSERT (Index + ConsoleInpMenu.MenuNumber < MAX_MENU_NUMBER);
NewTerminalContext->IsConIn = NewBmmData->ConsoleInCheck[Index + ConsoleInpMenu.MenuNumber];
}
Var_UpdateConsoleInpOption();
}
if (CompareMem (NewBmmData->ConsoleOutCheck, OldBmmData->ConsoleOutCheck, sizeof (NewBmmData->ConsoleOutCheck)) != 0){
for (Index = 0; Index < ConsoleOutMenu.MenuNumber; Index++){
NewMenuEntry = BOpt_GetMenuEntry(&ConsoleOutMenu, Index);
NewConsoleContext = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
ASSERT (Index < MAX_MENU_NUMBER);
NewConsoleContext->IsActive = NewBmmData->ConsoleOutCheck[Index];
}
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
ASSERT (Index + ConsoleOutMenu.MenuNumber < MAX_MENU_NUMBER);
NewTerminalContext->IsConOut = NewBmmData->ConsoleOutCheck[Index + ConsoleOutMenu.MenuNumber];
}
Var_UpdateConsoleOutOption();
}
if (CompareMem (NewBmmData->ConsoleErrCheck, OldBmmData->ConsoleErrCheck, sizeof (NewBmmData->ConsoleErrCheck)) != 0){
for (Index = 0; Index < ConsoleErrMenu.MenuNumber; Index++){
NewMenuEntry = BOpt_GetMenuEntry(&ConsoleErrMenu, Index);
NewConsoleContext = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
ASSERT (Index < MAX_MENU_NUMBER);
NewConsoleContext->IsActive = NewBmmData->ConsoleErrCheck[Index];
}
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
ASSERT (Index + ConsoleErrMenu.MenuNumber < MAX_MENU_NUMBER);
NewTerminalContext->IsStdErr = NewBmmData->ConsoleErrCheck[Index + ConsoleErrMenu.MenuNumber];
}
Var_UpdateErrorOutOption();
}
if (CompareMem (NewBmmData->BootDescriptionData, OldBmmData->BootDescriptionData, sizeof (NewBmmData->BootDescriptionData)) != 0 ||
CompareMem (NewBmmData->BootOptionalData, OldBmmData->BootOptionalData, sizeof (NewBmmData->BootOptionalData)) != 0) {
Status = Var_UpdateBootOption (Private);
NewBmmData->BootOptionChanged = FALSE;
if (EFI_ERROR (Status)) {
return Status;
}
BOpt_GetBootOptions (Private);
}
if (CompareMem (NewBmmData->DriverDescriptionData, OldBmmData->DriverDescriptionData, sizeof (NewBmmData->DriverDescriptionData)) != 0 ||
CompareMem (NewBmmData->DriverOptionalData, OldBmmData->DriverOptionalData, sizeof (NewBmmData->DriverOptionalData)) != 0) {
Status = Var_UpdateDriverOption (
Private,
Private->BmmHiiHandle,
NewBmmData->DriverDescriptionData,
NewBmmData->DriverOptionalData,
NewBmmData->ForceReconnect
);
NewBmmData->DriverOptionChanged = FALSE;
NewBmmData->ForceReconnect = TRUE;
if (EFI_ERROR (Status)) {
return Status;
}
BOpt_GetDriverOptions (Private);
}
//
// After user do the save action, need to update OldBmmData.
//
CopyMem (OldBmmData, NewBmmData, sizeof (BMM_FAKE_NV_DATA));
return EFI_SUCCESS;
}
