Пример #1
0
STATIC
EFI_STATUS
EFIAPI
EmmcGetDeviceState (
  IN  MMC_HOST_INSTANCE    *MmcHostInstance,
  OUT EMMC_DEVICE_STATE    *State
  )
{
  EFI_MMC_HOST_PROTOCOL *Host;
  EFI_STATUS Status;
  UINT32     Data, RCA;

  if (State == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  Host = MmcHostInstance->MmcHost;
  RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
  Status = Host->SendCommand (Host, MMC_CMD13, RCA);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
    return Status;
  }
  Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, &Data);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
    return Status;
  }
  if (Data & EMMC_SWITCH_ERROR) {
    DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
    return EFI_DEVICE_ERROR;
  }
  *State = DEVICE_STATE(Data);
  return EFI_SUCCESS;
}
Пример #2
0
EFI_STATUS
EFIAPI
MmcGetCardStatus (
  IN MMC_HOST_INSTANCE     *MmcHostInstance
  )
{
  EFI_STATUS              Status;
  UINT32                  Response[4];
  UINTN                   CmdArg;
  EFI_MMC_HOST_PROTOCOL   *MmcHost;

  Status = EFI_SUCCESS;
  MmcHost = MmcHostInstance->MmcHost;
  CmdArg = 0;

  if (MmcHost == NULL) {
    return EFI_INVALID_PARAMETER;
  }
  if (MmcHostInstance->State != MmcHwInitializationState) {
    //Get the Status of the card.
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcGetCardStatus(MMC_CMD13): Error and Status = %r\n", Status));
      return Status;
    }

    //Read Response
    MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
    PrintResponseR1 (Response[0]);
  }

  return Status;
}
Пример #3
0
STATIC
EFI_STATUS
EFIAPI
MmcIdentificationMode (
  IN MMC_HOST_INSTANCE     *MmcHostInstance
  )
{
  EFI_STATUS              Status;
  UINT32                  Response[4];
  UINTN                   Timeout;
  UINTN                   CmdArg;
  BOOLEAN                 IsHCS;
  EFI_MMC_HOST_PROTOCOL   *MmcHost;
  OCR_RESPONSE            OcrResponse;

  MmcHost = MmcHostInstance->MmcHost;
  CmdArg = 0;
  IsHCS = FALSE;

  if (MmcHost == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  // We can get into this function if we restart the identification mode
  if (MmcHostInstance->State == MmcHwInitializationState) {
    // Initialize the MMC Host HW
    Status = MmcNotifyState (MmcHostInstance, MmcHwInitializationState);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcHwInitializationState, Status=%r.\n", Status));
      return Status;
    }
  }

  Status = MmcHost->SendCommand (MmcHost, MMC_CMD0, 0);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD0): Error, Status=%r.\n", Status));
    return Status;
  }
  Status = MmcNotifyState (MmcHostInstance, MmcIdleState);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdleState, Status=%r.\n", Status));
    return Status;
  }

  // Send CMD1 to get OCR (MMC)
  // This command only valid for MMC and eMMC
  Timeout = MAX_RETRY_COUNT;
  do {
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
    if (EFI_ERROR (Status))
      break;
    Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, (UINT32 *)&OcrResponse);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
      return Status;
    }
    Timeout--;
  } while (!OcrResponse.Ocr.PowerUp && (Timeout > 0));
  if (Status == EFI_SUCCESS) {
    if (!OcrResponse.Ocr.PowerUp) {
      DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD1): Card initialisation failure, Status=%r.\n", Status));
      return EFI_DEVICE_ERROR;
    }
    OcrResponse.Ocr.PowerUp = 0;
    if (OcrResponse.Raw == EMMC_CMD1_CAPACITY_GREATER_THAN_2GB) {
      MmcHostInstance->CardInfo.OCRData.AccessMode = BIT1;
    }
    else {
      MmcHostInstance->CardInfo.OCRData.AccessMode = 0x0;
    }
    // Check whether MMC or eMMC
    if (OcrResponse.Raw == EMMC_CMD1_CAPACITY_GREATER_THAN_2GB ||
        OcrResponse.Raw == EMMC_CMD1_CAPACITY_LESS_THAN_2GB) {
      return EmmcIdentificationMode (MmcHostInstance, OcrResponse);
    }
  }

  // Are we using SDIO ?
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD5, 0);
  if (Status == EFI_SUCCESS) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD5): Error - SDIO not supported, Status=%r.\n", Status));
    return EFI_UNSUPPORTED;
  }

  // Check which kind of card we are using. Ver2.00 or later SD Memory Card (PL180 is SD v1.1)
  CmdArg = (0x0UL << 12 | BIT8 | 0xCEUL << 0);
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD8, CmdArg);
  if (Status == EFI_SUCCESS) {
    DEBUG ((EFI_D_ERROR, "Card is SD2.0 => Supports high capacity\n"));
    IsHCS = TRUE;
    Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R7, Response);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive response to CMD8, Status=%r.\n", Status));
      return Status;
    }
    PrintResponseR1 (Response[0]);
    // Check if it is valid response
    if (Response[0] != CmdArg) {
      DEBUG ((EFI_D_ERROR, "The Card is not usable\n"));
      return EFI_UNSUPPORTED;
    }
  } else {
    DEBUG ((EFI_D_ERROR, "Not a SD2.0 Card\n"));
  }

  // We need to wait for the MMC or SD card is ready => (gCardInfo.OCRData.PowerUp == 1)
  Timeout = MAX_RETRY_COUNT;
  while (Timeout > 0) {
    // SD Card or MMC Card ? CMD55 indicates to the card that the next command is an application specific command
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, 0);
    if (Status == EFI_SUCCESS) {
      DEBUG ((EFI_D_INFO, "Card should be SD\n"));
      if (IsHCS) {
        MmcHostInstance->CardInfo.CardType = SD_CARD_2;
      } else {
        MmcHostInstance->CardInfo.CardType = SD_CARD;
      }

      // Note: The first time CmdArg will be zero
      CmdArg = ((UINTN *) &(MmcHostInstance->CardInfo.OCRData))[0];
      if (IsHCS) {
        CmdArg |= BIT30;
      }
      Status = MmcHost->SendCommand (MmcHost, MMC_ACMD41, CmdArg);
      if (!EFI_ERROR (Status)) {
        Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);
        if (EFI_ERROR (Status)) {
          DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
          return Status;
        }
        ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];
      }
    } else {
      DEBUG ((EFI_D_INFO, "Card should be MMC\n"));
      MmcHostInstance->CardInfo.CardType = MMC_CARD;

      Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, 0x800000);
      if (!EFI_ERROR (Status)) {
        Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);
        if (EFI_ERROR (Status)) {
          DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
          return Status;
        }
        ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];
      }
    }

    if (!EFI_ERROR (Status)) {
      if (!MmcHostInstance->CardInfo.OCRData.PowerUp) {
        gBS->Stall (1);
        Timeout--;
      } else {
        if ((MmcHostInstance->CardInfo.CardType == SD_CARD_2) && (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1)) {
          MmcHostInstance->CardInfo.CardType = SD_CARD_2_HIGH;
          DEBUG ((EFI_D_ERROR, "High capacity card.\n"));
        }
        break;  // The MMC/SD card is ready. Continue the Identification Mode
      }
    } else {
      gBS->Stall (1);
      Timeout--;
    }
  }

  if (Timeout == 0) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(): No Card\n"));
    return EFI_NO_MEDIA;
  } else {
    PrintOCR (Response[0]);
  }

  Status = MmcNotifyState (MmcHostInstance, MmcReadyState);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcReadyState\n"));
    return Status;
  }

  Status = MmcHost->SendCommand (MmcHost, MMC_CMD2, 0);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD2): Error\n"));
    return Status;
  }
  Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CID, Response);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive CID, Status=%r.\n", Status));
    return Status;
  }

  PrintCID (Response);

  Status = MmcHost->NotifyState (MmcHost, MmcIdentificationState);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdentificationState\n"));
    return Status;
  }

  //
  // Note, SD specifications say that "if the command execution causes a state change, it
  // will be visible to the host in the response to the next command"
  // The status returned for this CMD3 will be 2 - identification
  //
  CmdArg = 1;
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD3, CmdArg);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD3): Error\n"));
    return Status;
  }

  Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_RCA, Response);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive RCA, Status=%r.\n", Status));
    return Status;
  }
  PrintRCA (Response[0]);

  // For MMC card, RCA is assigned by CMD3 while CMD3 dumps the RCA for SD card
  if (MmcHostInstance->CardInfo.CardType != MMC_CARD) {
    MmcHostInstance->CardInfo.RCA = Response[0] >> 16;
  } else {
Пример #4
0
STATIC
EFI_STATUS
InitializeSdMmcDevice (
  IN  MMC_HOST_INSTANCE   *MmcHostInstance
  )
{
  UINT32        CmdArg;
  UINT32        Response[4];
  UINT32        Buffer[128];
  UINTN         BlockSize;
  UINTN         CardSize;
  UINTN         NumBlocks;
  BOOLEAN       CccSwitch;
  SCR           Scr;
  EFI_STATUS    Status;
  EFI_MMC_HOST_PROTOCOL     *MmcHost;

  MmcHost = MmcHostInstance->MmcHost;

  // Send a command to get Card specific data
  CmdArg = MmcHostInstance->CardInfo.RCA << 16;
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD9, CmdArg);
  if (EFI_ERROR (Status)) {
    DEBUG((EFI_D_ERROR, "InitializeSdMmcDevice(MMC_CMD9): Error, Status=%r\n", Status));
    return Status;
  }

  // Read Response
  Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CSD, Response);
  if (EFI_ERROR (Status)) {
    DEBUG((EFI_D_ERROR, "InitializeSdMmcDevice(): Failed to receive CSD, Status=%r\n", Status));
    return Status;
  }
  PrintCSD (Response);
  if (MMC_CSD_GET_CCC(Response) & SD_CCC_SWITCH) {
    CccSwitch = TRUE;
  } else {
    CccSwitch = FALSE;
  }

  if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {
    CardSize = HC_MMC_CSD_GET_DEVICESIZE (Response);
    NumBlocks = ((CardSize + 1) * 1024);
    BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);
  } else {
    CardSize = MMC_CSD_GET_DEVICESIZE (Response);
    NumBlocks = (CardSize + 1) * (1 << (MMC_CSD_GET_DEVICESIZEMULT (Response) + 2));
    BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);
  }

  // For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.
  if (BlockSize > 512) {
    NumBlocks = MultU64x32 (NumBlocks, BlockSize / 512);
    BlockSize = 512;
  }

  MmcHostInstance->BlockIo.Media->LastBlock    = (NumBlocks - 1);
  MmcHostInstance->BlockIo.Media->BlockSize    = BlockSize;
  MmcHostInstance->BlockIo.Media->ReadOnly     = MmcHost->IsReadOnly (MmcHost);
  MmcHostInstance->BlockIo.Media->MediaPresent = TRUE;
  MmcHostInstance->BlockIo.Media->MediaId++;

  CmdArg = MmcHostInstance->CardInfo.RCA << 16;
  Status = MmcHost->SendCommand (MmcHost, MMC_CMD7, CmdArg);
  if (EFI_ERROR (Status)) {
    DEBUG((EFI_D_ERROR, "InitializeSdMmcDevice(MMC_CMD7): Error and Status = %r\n", Status));
    return Status;
  }

  Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
    return Status;
  }
  Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
    return Status;
  }
  if ((Response[0] & MMC_STATUS_APP_CMD) == 0) {
    return EFI_SUCCESS;
  }

  /* SCR */
  Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status));
    return Status;
  } else {
    Status = MmcHost->ReadBlockData (MmcHost, 0, 8, Buffer);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status));
      return Status;
    }
    CopyMem (&Scr, Buffer, 8);
    if (Scr.SD_SPEC == 2) {
      if (Scr.SD_SPEC3 == 1) {
	if (Scr.SD_SPEC4 == 1) {
          DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 4.xx\n"));
	} else {
          DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 3.0x\n"));
	}
      } else {
	if (Scr.SD_SPEC4 == 0) {
          DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 2.0\n"));
	} else {
	  DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n"));
	}
      }
    } else {
      if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) {
        if (Scr.SD_SPEC == 1) {
	  DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.10\n"));
	} else {
	  DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.0\n"));
	}
      } else {
        DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n"));
      }
    }
  }
  if (CccSwitch) {
    /* SD Switch, Mode:1, Group:0, Value:1 */
    CmdArg = 1 << 31 | 0x00FFFFFF;
    CmdArg &= ~(0xF << (0 * 4));
    CmdArg |= 1 << (0 * 4);
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, CmdArg);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status));
       return Status;
    } else {
      Status = MmcHost->ReadBlockData (MmcHost, 0, 64, Buffer);
      if (EFI_ERROR (Status)) {
        DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): ReadBlockData Error and Status = %r\n", Status));
        return Status;
      }
    }
  }
  if (Scr.SD_BUS_WIDTHS & SD_BUS_WIDTH_4BIT) {
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
      return Status;
    }
    /* Width: 4 */
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, 2);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status));
      return Status;
    }
  }
  if (MMC_HOST_HAS_SETIOS(MmcHost)) {
    Status = MmcHost->SetIos (MmcHost, 26 * 1000 * 1000, 4, EMMCBACKWARD);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(SetIos): Error and Status = %r\n", Status));
      return Status;
    }
  }
  return EFI_SUCCESS;
}
Пример #5
0
STATIC
EFI_STATUS
EFIAPI
EmmcIdentificationMode (
  IN MMC_HOST_INSTANCE     *MmcHostInstance,
  IN OCR_RESPONSE           Response
  )
{
  EFI_MMC_HOST_PROTOCOL *Host;
  EFI_BLOCK_IO_MEDIA    *Media;
  EFI_STATUS Status;
  EMMC_DEVICE_STATE     State;
  UINT32     RCA;

  Host  = MmcHostInstance->MmcHost;
  Media = MmcHostInstance->BlockIo.Media;

  // Fetch card identity register
  Status = Host->SendCommand (Host, MMC_CMD2, 0);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Failed to send CMD2, Status=%r.\n", Status));
    return Status;
  }

  Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R2, (UINT32 *)&(MmcHostInstance->CardInfo.CIDData));
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): CID retrieval error, Status=%r.\n", Status));
    return Status;
  }

  // Assign a relative address value to the card
  MmcHostInstance->CardInfo.RCA = ++mEmmcRcaCount; // TODO: might need a more sophisticated way of doing this
  RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
  Status = Host->SendCommand (Host, MMC_CMD3, RCA);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): RCA set error, Status=%r.\n", Status));
    return Status;
  }

  // Fetch card specific data
  Status = Host->SendCommand (Host, MMC_CMD9, RCA);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Failed to send CMD9, Status=%r.\n", Status));
    return Status;
  }

  Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R2, (UINT32 *)&(MmcHostInstance->CardInfo.CSDData));
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): CSD retrieval error, Status=%r.\n", Status));
    return Status;
  }

  // Select the card
  Status = Host->SendCommand (Host, MMC_CMD7, RCA);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Card selection error, Status=%r.\n", Status));
  }

  if (MMC_HOST_HAS_SETIOS(Host)) {
    // Set 1-bit bus width
    Status = Host->SetIos (Host, 0, 1, EMMCBACKWARD);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set 1-bit bus width error, Status=%r.\n", Status));
      return Status;
    }

    // Set 1-bit bus width for EXTCSD
    Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_1BIT);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set extcsd bus width error, Status=%r.\n", Status));
      return Status;
    }
  }

  // Fetch ECSD
  MmcHostInstance->CardInfo.ECSDData = AllocatePages (EFI_SIZE_TO_PAGES (sizeof (ECSD)));
  if (MmcHostInstance->CardInfo.ECSDData == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }
  Status = Host->SendCommand (Host, MMC_CMD8, 0);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
  }

  Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)MmcHostInstance->CardInfo.ECSDData);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
    goto FreePageExit;
  }

  // Make sure device exiting data mode
  do {
    Status = EmmcGetDeviceState (MmcHostInstance, &State);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Failed to get device state, Status=%r.\n", Status));
      goto FreePageExit;
    }
  } while (State == EMMC_DATA_STATE);

  // Set up media
  Media->BlockSize = EMMC_CARD_SIZE; // 512-byte support is mandatory for eMMC cards
  Media->MediaId = MmcHostInstance->CardInfo.CIDData.PSN;
  Media->ReadOnly = MmcHostInstance->CardInfo.CSDData.PERM_WRITE_PROTECT;
  Media->LogicalBlocksPerPhysicalBlock = 1;
  Media->IoAlign = 4;
  // Compute last block using bits [215:212] of the ECSD
  Media->LastBlock = MmcHostInstance->CardInfo.ECSDData->SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
  // Cards <2GB in size, but the model does.

  // Setup card type
  MmcHostInstance->CardInfo.CardType = EMMC_CARD;
  return EFI_SUCCESS;

FreePageExit:
  FreePages (MmcHostInstance->CardInfo.ECSDData, EFI_SIZE_TO_PAGES (sizeof (ECSD)));
  return Status;
}
Пример #6
0
EFI_STATUS
MmcIoBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINTN                    Transfer,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  )
{
  UINT32                  Response[4];
  EFI_STATUS              Status;
  UINTN                   CmdArg;
  INTN                    Timeout;
  UINTN                   Cmd;
  MMC_HOST_INSTANCE       *MmcHostInstance;
  EFI_MMC_HOST_PROTOCOL   *MmcHost;
  UINTN                   BytesRemainingToBeTransfered;
  UINTN                   BlockCount;

  BlockCount = 1;
  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
  ASSERT (MmcHostInstance != NULL);
  MmcHost = MmcHostInstance->MmcHost;
  ASSERT (MmcHost);

  if (This->Media->MediaId != MediaId) {
    return EFI_MEDIA_CHANGED;
  }

  if ((MmcHost == NULL) || (Buffer == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  // Check if a Card is Present
  if (!MmcHostInstance->BlockIo.Media->MediaPresent) {
    return EFI_NO_MEDIA;
  }

  // All blocks must be within the device
  if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Transfer == MMC_IOBLOCKS_WRITE) && (This->Media->ReadOnly == TRUE)) {
    return EFI_WRITE_PROTECTED;
  }

  // Reading 0 Byte is valid
  if (BufferSize == 0) {
    return EFI_SUCCESS;
  }

  // The buffer size must be an exact multiple of the block size
  if ((BufferSize % This->Media->BlockSize) != 0) {
    return EFI_BAD_BUFFER_SIZE;
  }

  // Check the alignment
  if ((This->Media->IoAlign > 2) && (((UINTN)Buffer & (This->Media->IoAlign - 1)) != 0)) {
    return EFI_INVALID_PARAMETER;
  }

  BytesRemainingToBeTransfered = BufferSize;
  while (BytesRemainingToBeTransfered > 0) {

    // Check if the Card is in Ready status
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
    Response[0] = 0;
    Timeout = 20;
    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))
          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
          && Timeout--) {
      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
      if (!EFI_ERROR (Status)) {
        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
      }
    }

    if (0 == Timeout) {
      DEBUG ((EFI_D_ERROR, "The Card is busy\n"));
      return EFI_NOT_READY;
    }

    //Set command argument based on the card access mode (Byte mode or Block mode)
    if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
      CmdArg = Lba;
    } else {
      CmdArg = Lba * This->Media->BlockSize;
    }

    if (Transfer == MMC_IOBLOCKS_READ) {
      // Read a single block
      Cmd = MMC_CMD17;
    } else {
      // Write a single block
      Cmd = MMC_CMD24;
    }
    Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));
      return Status;
    }

    if (Transfer == MMC_IOBLOCKS_READ) {
      // Read one block of Data
      Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
      if (EFI_ERROR (Status)) {
        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));
        MmcStopTransmission (MmcHost);
        return Status;
      }
      Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
      if (EFI_ERROR (Status)) {
        DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));
        return Status;
      }
    } else {
      // Write one block of Data
      Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
      if (EFI_ERROR (Status)) {
        DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));
        MmcStopTransmission (MmcHost);
        return Status;
      }
    }

    // Command 13 - Read status and wait for programming to complete (return to tran)
    Timeout = MMCI0_TIMEOUT;
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
    Response[0] = 0;
    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))
          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
          && Timeout--) {
      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
      if (!EFI_ERROR (Status)) {
        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
        if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
          break;  // Prevents delay once finished
        }
      }
      gBS->Stall (1);
    }

    Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
      return Status;
    }

    BytesRemainingToBeTransfered -= This->Media->BlockSize;
    Lba    += BlockCount;
    Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
  }

  return EFI_SUCCESS;
}
Пример #7
0
EFI_STATUS
MmcIoBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINTN                    Transfer,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  )
{
  UINT32                  Response[4];
  EFI_STATUS              Status;
  UINTN                   CmdArg;
  INTN                    Timeout;
  UINTN                   Cmd;
  MMC_HOST_INSTANCE       *MmcHostInstance;
  EFI_MMC_HOST_PROTOCOL   *MmcHost;
  UINTN                   BytesRemainingToBeTransfered;
  UINTN                   BlockCount;
  UINTN                   ConsumeSize;

  BlockCount = 1;
  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
  ASSERT (MmcHostInstance != NULL);
  MmcHost = MmcHostInstance->MmcHost;
  ASSERT (MmcHost);

  if (This->Media->MediaId != MediaId) {
    return EFI_MEDIA_CHANGED;
  }

  if ((MmcHost == NULL) || (Buffer == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  // Check if a Card is Present
  if (!MmcHostInstance->BlockIo.Media->MediaPresent) {
    return EFI_NO_MEDIA;
  }

  if (MMC_HOST_HAS_ISMULTIBLOCK(MmcHost) && MmcHost->IsMultiBlock(MmcHost)) {
    BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;
  }

  // All blocks must be within the device
  if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Transfer == MMC_IOBLOCKS_WRITE) && (This->Media->ReadOnly == TRUE)) {
    return EFI_WRITE_PROTECTED;
  }

  // Reading 0 Byte is valid
  if (BufferSize == 0) {
    return EFI_SUCCESS;
  }

  // The buffer size must be an exact multiple of the block size
  if ((BufferSize % This->Media->BlockSize) != 0) {
    return EFI_BAD_BUFFER_SIZE;
  }

  // Check the alignment
  if ((This->Media->IoAlign > 2) && (((UINTN)Buffer & (This->Media->IoAlign - 1)) != 0)) {
    return EFI_INVALID_PARAMETER;
  }

  BytesRemainingToBeTransfered = BufferSize;
  while (BytesRemainingToBeTransfered > 0) {

    // Check if the Card is in Ready status
    CmdArg = MmcHostInstance->CardInfo.RCA << 16;
    Response[0] = 0;
    Timeout = 20;
    while(   (!(Response[0] & MMC_R0_READY_FOR_DATA))
          && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
          && Timeout--) {
      Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
      if (!EFI_ERROR (Status)) {
        MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
      }
    }

    if (0 == Timeout) {
      DEBUG ((EFI_D_ERROR, "The Card is busy\n"));
      return EFI_NOT_READY;
    }

    if (Transfer == MMC_IOBLOCKS_READ) {
      if (BlockCount == 1) {
        // Read a single block
        Cmd = MMC_CMD17;
      } else {
	// Read multiple blocks
	Cmd = MMC_CMD18;
      }
    } else {
      if (BlockCount == 1) {
        // Write a single block
        Cmd = MMC_CMD24;
      } else {
	// Write multiple blocks
	Cmd = MMC_CMD25;
      }
    }

    ConsumeSize = BlockCount * This->Media->BlockSize;
    if (BytesRemainingToBeTransfered < ConsumeSize) {
      ConsumeSize = BytesRemainingToBeTransfered;
    }
    Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));
    }

    BytesRemainingToBeTransfered -= ConsumeSize;
    if (BytesRemainingToBeTransfered > 0) {
      Lba    += BlockCount;
      Buffer = (UINT8 *)Buffer + ConsumeSize;
    }
  }

  return EFI_SUCCESS;
}
Пример #8
0
STATIC
EFI_STATUS
MmcTransferBlock (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINTN                    Cmd,
  IN UINTN                    Transfer,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  )
{
  EFI_STATUS              Status;
  UINTN                   CmdArg;
  INTN                    Timeout;
  UINT32                  Response[4];
  MMC_HOST_INSTANCE       *MmcHostInstance;
  EFI_MMC_HOST_PROTOCOL   *MmcHost;

  MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
  MmcHost = MmcHostInstance->MmcHost;

  if (MmcHostInstance->CardInfo.CardType != EMMC_CARD) {
    //Set command argument based on the card capacity
    //if 0 : SDSC card
    //if 1 : SDXC/SDHC
    if (MmcHostInstance->CardInfo.OCRData.AccessMode & SD_CARD_CAPACITY) {
      CmdArg = Lba;
    } else {
      CmdArg = Lba * This->Media->BlockSize;
    }
  } else {
    //Set command argument based on the card access mode (Byte mode or Block mode)
    if ((MmcHostInstance->CardInfo.OCRData.AccessMode & MMC_OCR_ACCESS_MASK) ==
        MMC_OCR_ACCESS_SECTOR) {
      CmdArg = Lba;
    } else {
      CmdArg = Lba * This->Media->BlockSize;
    }
  }

  Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__, Cmd, Status));
    return Status;
  }

  if (Transfer == MMC_IOBLOCKS_READ) {
    // Read Data
    Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_BLKIO, "%a(): Error Read Block Data and Status = %r\n", __func__, Status));
      MmcStopTransmission (MmcHost);
      return Status;
    }
    Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_ERROR, "%a() : Error MmcProgrammingState\n", __func__));
      return Status;
    }
  } else {
    // Write Data
    Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_BLKIO, "%a(): Error Write Block Data and Status = %r\n", __func__, Status));
      MmcStopTransmission (MmcHost);
      return Status;
    }
  }

  // Command 13 - Read status and wait for programming to complete (return to tran)
  Timeout = MMCI0_TIMEOUT;
  CmdArg = MmcHostInstance->CardInfo.RCA << 16;
  Response[0] = 0;
  while(!(Response[0] & MMC_R0_READY_FOR_DATA)
        && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
        && Timeout--) {
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
    if (!EFI_ERROR (Status)) {
      MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
      if (Response[0] & MMC_R0_READY_FOR_DATA) {
        break;  // Prevents delay once finished
      }
    }
  }

  if (BufferSize > This->Media->BlockSize) {
    Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_BLKIO, "%a(): Error and Status:%r\n", __func__, Status));
    }
    MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1b, Response);
  }

  Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
    return Status;
  }
  return Status;
}