void FMD3Model::RenderFrame(FTexture * skin, int frameno, int cm, Matrix3x4 *modeltoworld, int translation)
{
if (frameno>=numFrames) return;
MD3Frame * frame = &frames[frameno];
// I can't confirm correctness of this because no model I have tested uses this information
// gl.MatrixMode(GL_MODELVIEW);
// gl.Translatef(frame->origin[0], frame->origin[1], frame->origin[2]);
for(int i=0;i<numSurfaces;i++)
{
MD3Surface * surf = &surfaces[i];
if (!skin)
{
if (surf->numSkins==0) return;
skin = surf->skins[0];
if (!skin) return;
}
FMaterial * tex = FMaterial::ValidateTexture(skin);
tex->Bind(cm, 0, translation);
RenderTriangles(surf, surf->vertices + frameno * surf->numVertices, modeltoworld);
}
}
void FMD3Model::RenderFrame(FTexture * skin, int frameno, int cm, int translation)
{
if (frameno>=numFrames) return;
MD3Frame * frame = &frames[frameno];
// I can't confirm correctness of this because no model I have tested uses this information
// glMatrixMode(GL_MODELVIEW);
// glTranslatef(frame->origin[0], frame->origin[1], frame->origin[2]);
for(int i=0;i<numSurfaces;i++)
{
MD3Surface * surf = &surfaces[i];
// [BB] In case no skin is specified via MODELDEF, check if the MD3 has a skin for the current surface.
// Note: Each surface may have a different skin.
FTexture *surfaceSkin = skin;
if (!surfaceSkin)
{
if (surf->numSkins==0) return;
surfaceSkin = surf->skins[0];
if (!surfaceSkin) return;
}
FMaterial * tex = FMaterial::ValidateTexture(surfaceSkin);
tex->Bind(cm, 0, translation);
RenderTriangles(surf, surf->vertices + frameno * surf->numVertices);
}
}
void FGLRenderer::FillSimplePoly(FTexture *texture, FVector2 *points, int npoints,
double originx, double originy, double scalex, double scaley,
angle_t rotation, FDynamicColormap *colormap, int lightlevel)
{
if (npoints < 3)
{ // This is no polygon.
return;
}
FMaterial *gltexture = FMaterial::ValidateTexture(texture);
if (gltexture == NULL)
{
return;
}
FColormap cm;
cm = colormap;
lightlevel = gl_CalcLightLevel(lightlevel, 0, true);
PalEntry pe = gl_CalcLightColor(lightlevel, cm.LightColor, cm.blendfactor, true);
glColor3ub(pe.r, pe.g, pe.b);
gltexture->Bind(cm.colormap);
int i;
float rot = float(rotation * M_PI / float(1u << 31));
bool dorotate = rot != 0;
float cosrot = cos(rot);
float sinrot = sin(rot);
//float yoffs = GatheringWipeScreen ? 0 : LBOffset;
float uscale = float(1.f / (texture->GetScaledWidth() * scalex));
float vscale = float(1.f / (texture->GetScaledHeight() * scaley));
if (gltexture->tex->bHasCanvas)
{
vscale = 0 - vscale;
}
float ox = float(originx);
float oy = float(originy);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
for (i = 0; i < npoints; ++i)
{
float u = points[i].X - 0.5f - ox;
float v = points[i].Y - 0.5f - oy;
if (dorotate)
{
float t = u;
u = t * cosrot - v * sinrot;
v = v * cosrot + t * sinrot;
}
glTexCoord2f(u * uscale, v * vscale);
glVertex3f(points[i].X, points[i].Y /* + yoffs */, 0);
}
glEnd();
}
void FMD3Model::RenderFrameInterpolated(FTexture * skin, int frameno, int frameno2, double inter, int cm, int translation)
{
if (frameno>=numFrames || frameno2>=numFrames) return;
for(int i=0;i<numSurfaces;i++)
{
MD3Surface * surf = &surfaces[i];
// [BB] In case no skin is specified via MODELDEF, check if the MD3 has a skin for the current surface.
// Note: Each surface may have a different skin.
FTexture *surfaceSkin = skin;
if (!surfaceSkin)
{
if (surf->numSkins==0) return;
surfaceSkin = surf->skins[0];
if (!surfaceSkin) return;
}
FMaterial * tex = FMaterial::ValidateTexture(surfaceSkin);
tex->Bind(cm, 0, translation);
MD3Vertex* verticesInterpolated = new MD3Vertex[surfaces[i].numVertices];
MD3Vertex* vertices1 = surf->vertices + frameno * surf->numVertices;
MD3Vertex* vertices2 = surf->vertices + frameno2 * surf->numVertices;
// [BB] Calculate the interpolated vertices by linear interpolation.
for( int k = 0; k < surf->numVertices; k++ )
{
verticesInterpolated[k].x = (1-inter)*vertices1[k].x+ (inter)*vertices2[k].x;
verticesInterpolated[k].y = (1-inter)*vertices1[k].y+ (inter)*vertices2[k].y;
verticesInterpolated[k].z = (1-inter)*vertices1[k].z+ (inter)*vertices2[k].z;
// [BB] Apparently RenderTriangles doesn't use nx, ny, nz, so don't interpolate them.
}
RenderTriangles(surf, verticesInterpolated);
delete[] verticesInterpolated;
}
}
void FMD3Model::RenderFrameInterpolated(FTexture * skin, int frameno, int frameno2, double inter, int cm, Matrix3x4 *modeltoworld, int translation)
{
if (frameno>=numFrames || frameno2>=numFrames) return;
for(int i=0;i<numSurfaces;i++)
{
MD3Surface * surf = &surfaces[i];
if (!skin)
{
if (surf->numSkins==0) return;
skin = surf->skins[0];
if (!skin) return;
}
FMaterial * tex = FMaterial::ValidateTexture(skin);
tex->Bind(cm, 0, translation);
MD3Vertex* verticesInterpolated = new MD3Vertex[surfaces[i].numVertices];
MD3Vertex* vertices1 = surf->vertices + frameno * surf->numVertices;
MD3Vertex* vertices2 = surf->vertices + frameno2 * surf->numVertices;
// [BB] Calculate the interpolated vertices by linear interpolation.
for( int k = 0; k < surf->numVertices; k++ )
{
verticesInterpolated[k].x = (1-inter)*vertices1[k].x+ (inter)*vertices2[k].x;
verticesInterpolated[k].y = (1-inter)*vertices1[k].y+ (inter)*vertices2[k].y;
verticesInterpolated[k].z = (1-inter)*vertices1[k].z+ (inter)*vertices2[k].z;
// [BB] Apparently RenderTriangles doesn't use nx, ny, nz, so don't interpolate them.
}
RenderTriangles(surf, verticesInterpolated, modeltoworld);
delete[] verticesInterpolated;
}
}
//-----------------------------------------------------------------------------
//-----------------------------------------------------------------------------
//
//
// Horizon Portal
//
// This simply draws the area in medium sized squares. Drawing it as a whole
// polygon creates visible inaccuracies.
//
// Originally I tried to minimize the amount of data to be drawn but there
// are 2 problems with it:
//
// 1. Setting this up completely negates any performance gains.
// 2. It doesn't work with a 360° field of view (as when you are looking up.)
//
//
// So the brute force mechanism is just as good.
//
//
//-----------------------------------------------------------------------------
//-----------------------------------------------------------------------------
//-----------------------------------------------------------------------------
//
// GLHorizonPortal::DrawContents
//
//-----------------------------------------------------------------------------
void GLHorizonPortal::DrawContents()
{
PortalAll.Clock();
GLSectorPlane * sp=&origin->plane;
FMaterial * gltexture;
PalEntry color;
float z;
player_t * player=&players[consoleplayer];
gltexture=FMaterial::ValidateTexture(sp->texture, true);
if (!gltexture)
{
ClearScreen();
PortalAll.Unclock();
return;
}
z=FIXED2FLOAT(sp->texheight);
if (gltexture && gltexture->tex->isFullbright())
{
// glowing textures are always drawn full bright without color
gl_SetColor(255, 0, NULL, 1.f);
gl_SetFog(255, 0, &origin->colormap, false);
}
else
{
int rel = getExtraLight();
gl_SetColor(origin->lightlevel, rel, &origin->colormap, 1.0f);
gl_SetFog(origin->lightlevel, rel, &origin->colormap, false);
}
gltexture->Bind(origin->colormap.colormap);
gl_RenderState.EnableAlphaTest(false);
gl_RenderState.BlendFunc(GL_ONE,GL_ZERO);
gl_RenderState.Apply();
bool pushed = gl_SetPlaneTextureRotation(sp, gltexture);
float vx=FIXED2FLOAT(viewx);
float vy=FIXED2FLOAT(viewy);
// Draw to some far away boundary
for(float x=-32768+vx; x<32768+vx; x+=4096)
{
for(float y=-32768+vy; y<32768+vy;y+=4096)
{
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(x/64, -y/64);
glVertex3f(x, z, y);
glTexCoord2f(x/64 + 64, -y/64);
glVertex3f(x + 4096, z, y);
glTexCoord2f(x/64 + 64, -y/64 - 64);
glVertex3f(x + 4096, z, y + 4096);
glTexCoord2f(x/64, -y/64 - 64);
glVertex3f(x, z, y + 4096);
glEnd();
}
}
float vz=FIXED2FLOAT(viewz);
float tz=(z-vz);///64.0f;
// fill the gap between the polygon and the true horizon
// Since I can't draw into infinity there can always be a
// small gap
glBegin(GL_TRIANGLE_STRIP);
glTexCoord2f(512.f, 0);
glVertex3f(-32768+vx, z, -32768+vy);
glTexCoord2f(512.f, tz);
glVertex3f(-32768+vx, vz, -32768+vy);
glTexCoord2f(-512.f, 0);
glVertex3f(-32768+vx, z, 32768+vy);
glTexCoord2f(-512.f, tz);
glVertex3f(-32768+vx, vz, 32768+vy);
glTexCoord2f(512.f, 0);
glVertex3f( 32768+vx, z, 32768+vy);
glTexCoord2f(512.f, tz);
glVertex3f( 32768+vx, vz, 32768+vy);
glTexCoord2f(-512.f, 0);
glVertex3f( 32768+vx, z, -32768+vy);
glTexCoord2f(-512.f, tz);
glVertex3f( 32768+vx, vz, -32768+vy);
glTexCoord2f(512.f, 0);
glVertex3f(-32768+vx, z, -32768+vy);
glTexCoord2f(512.f, tz);
glVertex3f(-32768+vx, vz, -32768+vy);
glEnd();
if (pushed)
{
glPopMatrix();
glMatrixMode(GL_MODELVIEW);
}
PortalAll.Unclock();
}
//==========================================================================
//
// Draw the plane segment into the gap
//
//==========================================================================
void FDrawInfo::DrawFloodedPlane(wallseg * ws, float planez, sector_t * sec, bool ceiling)
{
GLSectorPlane plane;
int lightlevel;
FColormap Colormap;
FMaterial * gltexture;
plane.GetFromSector(sec, ceiling);
gltexture=FMaterial::ValidateTexture(plane.texture, true);
if (!gltexture) return;
if (gl_fixedcolormap)
{
Colormap.Clear();
lightlevel=255;
}
else
{
Colormap=sec->ColorMap;
if (gltexture->tex->isFullbright())
{
Colormap.LightColor.r = Colormap.LightColor.g = Colormap.LightColor.b = 0xff;
lightlevel=255;
}
else lightlevel=abs(ceiling? sec->GetCeilingLight() : sec->GetFloorLight());
}
int rel = getExtraLight();
gl_SetColor(lightlevel, rel, Colormap, 1.0f);
gl_SetFog(lightlevel, rel, &Colormap, false);
gltexture->Bind();
float fviewx = FIXED2FLOAT(viewx);
float fviewy = FIXED2FLOAT(viewy);
float fviewz = FIXED2FLOAT(viewz);
gl_SetPlaneTextureRotation(&plane, gltexture);
gl_RenderState.Apply();
float prj_fac1 = (planez-fviewz)/(ws->z1-fviewz);
float prj_fac2 = (planez-fviewz)/(ws->z2-fviewz);
float px1 = fviewx + prj_fac1 * (ws->x1-fviewx);
float py1 = fviewy + prj_fac1 * (ws->y1-fviewy);
float px2 = fviewx + prj_fac2 * (ws->x1-fviewx);
float py2 = fviewy + prj_fac2 * (ws->y1-fviewy);
float px3 = fviewx + prj_fac2 * (ws->x2-fviewx);
float py3 = fviewy + prj_fac2 * (ws->y2-fviewy);
float px4 = fviewx + prj_fac1 * (ws->x2-fviewx);
float py4 = fviewy + prj_fac1 * (ws->y2-fviewy);
FFlatVertex *ptr = GLRenderer->mVBO->GetBuffer();
ptr->Set(px1, planez, py1, px1 / 64, -py1 / 64);
ptr++;
ptr->Set(px2, planez, py2, px2 / 64, -py2 / 64);
ptr++;
ptr->Set(px3, planez, py3, px3 / 64, -py3 / 64);
ptr++;
ptr->Set(px4, planez, py4, px4 / 64, -py4 / 64);
ptr++;
GLRenderer->mVBO->RenderCurrent(ptr, GL_TRIANGLE_FAN);
gl_RenderState.EnableTextureMatrix(false);
}
//==========================================================================
//
// Draw the plane segment into the gap
//
//==========================================================================
void FDrawInfo::DrawFloodedPlane(wallseg * ws, float planez, sector_t * sec, bool ceiling)
{
GLSectorPlane plane;
int lightlevel;
FColormap Colormap;
FMaterial * gltexture;
plane.GetFromSector(sec, ceiling);
gltexture=FMaterial::ValidateTexture(plane.texture, true);
if (!gltexture) return;
if (gl_fixedcolormap)
{
Colormap.GetFixedColormap();
lightlevel=255;
}
else
{
Colormap=sec->ColorMap;
if (gltexture->tex->isFullbright())
{
Colormap.LightColor.r = Colormap.LightColor.g = Colormap.LightColor.b = 0xff;
lightlevel=255;
}
else lightlevel=abs(ceiling? sec->GetCeilingLight() : sec->GetFloorLight());
}
int rel = getExtraLight();
gl_SetColor(lightlevel, rel, &Colormap, 1.0f);
gl_SetFog(lightlevel, rel, &Colormap, false);
gltexture->Bind(Colormap.colormap);
float fviewx = FIXED2FLOAT(viewx);
float fviewy = FIXED2FLOAT(viewy);
float fviewz = FIXED2FLOAT(viewz);
gl_RenderState.Apply();
bool pushed = gl_SetPlaneTextureRotation(&plane, gltexture);
glBegin(GL_TRIANGLE_FAN);
float prj_fac1 = (planez-fviewz)/(ws->z1-fviewz);
float prj_fac2 = (planez-fviewz)/(ws->z2-fviewz);
float px1 = fviewx + prj_fac1 * (ws->x1-fviewx);
float py1 = fviewy + prj_fac1 * (ws->y1-fviewy);
float px2 = fviewx + prj_fac2 * (ws->x1-fviewx);
float py2 = fviewy + prj_fac2 * (ws->y1-fviewy);
float px3 = fviewx + prj_fac2 * (ws->x2-fviewx);
float py3 = fviewy + prj_fac2 * (ws->y2-fviewy);
float px4 = fviewx + prj_fac1 * (ws->x2-fviewx);
float py4 = fviewy + prj_fac1 * (ws->y2-fviewy);
glTexCoord2f(px1 / 64, -py1 / 64);
glVertex3f(px1, planez, py1);
glTexCoord2f(px2 / 64, -py2 / 64);
glVertex3f(px2, planez, py2);
glTexCoord2f(px3 / 64, -py3 / 64);
glVertex3f(px3, planez, py3);
glTexCoord2f(px4 / 64, -py4 / 64);
glVertex3f(px4, planez, py4);
glEnd();
if (pushed)
{
glPopMatrix();
glMatrixMode(GL_MODELVIEW);
}
}
void FGLRenderer::DrawTexture(FTexture *img, DCanvas::DrawParms &parms)
{
double xscale = parms.destwidth / parms.texwidth;
double yscale = parms.destheight / parms.texheight;
double x = parms.x - parms.left * xscale;
double y = parms.y - parms.top * yscale;
double w = parms.destwidth;
double h = parms.destheight;
float u1, v1, u2, v2, r, g, b;
float light = 1.f;
FMaterial * gltex = FMaterial::ValidateTexture(img);
const PatchTextureInfo * pti;
if (parms.colorOverlay)
{
// Right now there's only black. Should be implemented properly later
light = 1.f - APART(parms.colorOverlay)/255.f;
}
if (!img->bHasCanvas)
{
if (!parms.alphaChannel)
{
int translation = 0;
if (parms.remap != NULL && !parms.remap->Inactive)
{
GLTranslationPalette * pal = static_cast<GLTranslationPalette*>(parms.remap->GetNative());
if (pal) translation = -pal->GetIndex();
}
pti = gltex->BindPatch(CM_DEFAULT, translation);
}
else
{
// This is an alpha texture
pti = gltex->BindPatch(CM_SHADE, 0);
}
if (!pti) return;
u1 = pti->GetUL();
v1 = pti->GetVT();
u2 = pti->GetUR();
v2 = pti->GetVB();
}
else
{
gltex->Bind(CM_DEFAULT, 0, 0);
u2=1.f;
v2=-1.f;
u1 = v1 = 0.f;
gl_RenderState.SetTextureMode(TM_OPAQUE);
}
if (parms.flipX)
{
float temp = u1;
u1 = u2;
u2 = temp;
}
if (parms.windowleft > 0 || parms.windowright < parms.texwidth)
{
x += parms.windowleft * xscale;
w -= (parms.texwidth - parms.windowright + parms.windowleft) * xscale;
u1 = float(u1 + parms.windowleft / parms.texwidth);
u2 = float(u2 - (parms.texwidth - parms.windowright) / parms.texwidth);
}
if (parms.style.Flags & STYLEF_ColorIsFixed)
{
r = RPART(parms.fillcolor)/255.0f;
g = GPART(parms.fillcolor)/255.0f;
b = BPART(parms.fillcolor)/255.0f;
}
else
{
r = g = b = light;
}
// scissor test doesn't use the current viewport for the coordinates, so use real screen coordinates
int btm = (SCREENHEIGHT - screen->GetHeight()) / 2;
btm = SCREENHEIGHT - btm;
gl.Enable(GL_SCISSOR_TEST);
int space = (static_cast<OpenGLFrameBuffer*>(screen)->GetTrueHeight()-screen->GetHeight())/2;
gl.Scissor(parms.lclip, btm - parms.dclip + space, parms.rclip - parms.lclip, parms.dclip - parms.uclip);
gl_SetRenderStyle(parms.style, !parms.masked, false);
if (img->bHasCanvas)
{
gl_RenderState.SetTextureMode(TM_OPAQUE);
}
gl.Color4f(r, g, b, FIXED2FLOAT(parms.alpha));
gl_RenderState.EnableAlphaTest(false);
gl_RenderState.Apply();
gl.Begin(GL_TRIANGLE_STRIP);
gl.TexCoord2f(u1, v1);
glVertex2d(x, y);
gl.TexCoord2f(u1, v2);
glVertex2d(x, y + h);
gl.TexCoord2f(u2, v1);
glVertex2d(x + w, y);
gl.TexCoord2f(u2, v2);
glVertex2d(x + w, y + h);
gl.End();
gl_RenderState.EnableAlphaTest(true);
gl.Scissor(0, 0, screen->GetWidth(), screen->GetHeight());
gl.Disable(GL_SCISSOR_TEST);
gl_RenderState.SetTextureMode(TM_MODULATE);
gl_RenderState.BlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
gl_RenderState.BlendEquation(GL_FUNC_ADD);
}
static void RenderBox(FTextureID texno, FMaterial * gltex, float x_offset, int CM_Index, bool sky2)
{
FSkyBox * sb = static_cast<FSkyBox*>(gltex->tex);
int faces;
FMaterial * tex;
if (!sky2)
glRotatef(-180.0f+x_offset, glset.skyrotatevector.X, glset.skyrotatevector.Z, glset.skyrotatevector.Y);
else
glRotatef(-180.0f+x_offset, glset.skyrotatevector2.X, glset.skyrotatevector2.Z, glset.skyrotatevector2.Y);
glColor3f(R, G ,B);
if (sb->faces[5])
{
faces=4;
// north
tex = FMaterial::ValidateTexture(sb->faces[0]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(128.f, 128.f, -128.f);
glTexCoord2f(1, 0);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(1, 1);
glVertex3f(-128.f, -128.f, -128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, -128.f, -128.f);
glEnd();
// east
tex = FMaterial::ValidateTexture(sb->faces[1]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(1, 0);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(1, 1);
glVertex3f(-128.f, -128.f, 128.f);
glTexCoord2f(0, 1);
glVertex3f(-128.f, -128.f, -128.f);
glEnd();
// south
tex = FMaterial::ValidateTexture(sb->faces[2]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(1, 0);
glVertex3f(128.f, 128.f, 128.f);
glTexCoord2f(1, 1);
glVertex3f(128.f, -128.f, 128.f);
glTexCoord2f(0, 1);
glVertex3f(-128.f, -128.f, 128.f);
glEnd();
// west
tex = FMaterial::ValidateTexture(sb->faces[3]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(128.f, 128.f, 128.f);
glTexCoord2f(1, 0);
glVertex3f(128.f, 128.f, -128.f);
glTexCoord2f(1, 1);
glVertex3f(128.f, -128.f, -128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, -128.f, 128.f);
glEnd();
}
else
{
faces=1;
// all 4 sides
tex = FMaterial::ValidateTexture(sb->faces[0]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(128.f, 128.f, -128.f);
glTexCoord2f(.25f, 0);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(.25f, 1);
glVertex3f(-128.f, -128.f, -128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, -128.f, -128.f);
glEnd();
// east
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(.25f, 0);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(.5f, 0);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(.5f, 1);
glVertex3f(-128.f, -128.f, 128.f);
glTexCoord2f(.25f, 1);
glVertex3f(-128.f, -128.f, -128.f);
glEnd();
// south
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(.5f, 0);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(.75f, 0);
glVertex3f(128.f, 128.f, 128.f);
glTexCoord2f(.75f, 1);
glVertex3f(128.f, -128.f, 128.f);
glTexCoord2f(.5f, 1);
glVertex3f(-128.f, -128.f, 128.f);
glEnd();
// west
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(.75f, 0);
glVertex3f(128.f, 128.f, 128.f);
glTexCoord2f(1, 0);
glVertex3f(128.f, 128.f, -128.f);
glTexCoord2f(1, 1);
glVertex3f(128.f, -128.f, -128.f);
glTexCoord2f(.75f, 1);
glVertex3f(128.f, -128.f, 128.f);
glEnd();
}
// top
tex = FMaterial::ValidateTexture(sb->faces[faces]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
if (!sb->fliptop)
{
glTexCoord2f(0, 0);
glVertex3f(128.f, 128.f, -128.f);
glTexCoord2f(1, 0);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(1, 1);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, 128.f, 128.f);
}
else
{
glTexCoord2f(0, 0);
glVertex3f(128.f, 128.f, 128.f);
glTexCoord2f(1, 0);
glVertex3f(-128.f, 128.f, 128.f);
glTexCoord2f(1, 1);
glVertex3f(-128.f, 128.f, -128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, 128.f, -128.f);
}
glEnd();
// bottom
tex = FMaterial::ValidateTexture(sb->faces[faces+1]);
tex->Bind(CM_Index, GLT_CLAMPX|GLT_CLAMPY, 0);
gl_RenderState.Apply();
glBegin(GL_TRIANGLE_FAN);
glTexCoord2f(0, 0);
glVertex3f(128.f, -128.f, -128.f);
glTexCoord2f(1, 0);
glVertex3f(-128.f, -128.f, -128.f);
glTexCoord2f(1, 1);
glVertex3f(-128.f, -128.f, 128.f);
glTexCoord2f(0, 1);
glVertex3f(128.f, -128.f, 128.f);
glEnd();
}
