Пример #1
0
void FDrawInfo::ClearFloodStencil(wallseg * ws)
{
	int recursion = GLPortal::GetRecursion();

	glStencilOp(GL_KEEP,GL_KEEP,GL_DECR);
	gl_RenderState.EnableTexture(false);
	{
		// Use revertible color mask, to avoid stomping on anaglyph 3D state
		ScopedColorMask colorMask(0, 0, 0, 0); // glColorMask(0,0,0,0);						// don't write to the graphics buffer
		gl_RenderState.ResetColor();

		gl_RenderState.Apply();
		FQuadDrawer qd;
		qd.Set(0, ws->x1, ws->z1, ws->y1, 0, 0);
		qd.Set(1, ws->x1, ws->z2, ws->y1, 0, 0);
		qd.Set(2, ws->x2, ws->z2, ws->y2, 0, 0);
		qd.Set(3, ws->x2, ws->z1, ws->y2, 0, 0);
		qd.Render(GL_TRIANGLE_FAN);

		// restore old stencil op.
		glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP);
		glStencilFunc(GL_EQUAL, recursion, ~0);
		gl_RenderState.EnableTexture(true);
	} // glColorMask(1, 1, 1, 1);
	glEnable(GL_DEPTH_TEST);
	glDepthMask(true);
}
Пример #2
0
void FDrawInfo::SetupFloodStencil(wallseg * ws)
{
	int recursion = GLPortal::GetRecursion();

	// Create stencil 
	glStencilFunc(GL_EQUAL, recursion, ~0);		// create stencil
	glStencilOp(GL_KEEP, GL_KEEP, GL_INCR);		// increment stencil of valid pixels
	{
		// Use revertible color mask, to avoid stomping on anaglyph 3D state
		ScopedColorMask colorMask(0, 0, 0, 0); // glColorMask(0, 0, 0, 0);						// don't write to the graphics buffer
		gl_RenderState.EnableTexture(false);
		gl_RenderState.ResetColor();
		glEnable(GL_DEPTH_TEST);
		glDepthMask(true);

		gl_RenderState.Apply();
		FQuadDrawer qd;
		qd.Set(0, ws->x1, ws->z1, ws->y1, 0, 0);
		qd.Set(1, ws->x1, ws->z2, ws->y1, 0, 0);
		qd.Set(2, ws->x2, ws->z2, ws->y2, 0, 0);
		qd.Set(3, ws->x2, ws->z1, ws->y2, 0, 0);
		qd.Render(GL_TRIANGLE_FAN);

		glStencilFunc(GL_EQUAL, recursion + 1, ~0);		// draw sky into stencil
		glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP);		// this stage doesn't modify the stencil

	} // glColorMask(1, 1, 1, 1);						// don't write to the graphics buffer
	gl_RenderState.EnableTexture(true);
	glDisable(GL_DEPTH_TEST);
	glDepthMask(false);
}
Пример #3
0
void GLWall::RenderWall(int textured)
{
	gl_RenderState.Apply();
	gl_RenderState.ApplyLightIndex(dynlightindex);
	if (gl.buffermethod != BM_DEFERRED)
	{
		MakeVertices(!(textured&RWF_NOSPLIT));
	}
	else if (vertcount == 0)
	{
		// This should never happen but in case it actually does, use the quad drawer as fallback (without edge splitting.)
		// This way it at least gets drawn.
		FQuadDrawer qd;
		qd.Set(0, glseg.x1, zbottom[0], glseg.y1, tcs[LOLFT].u, tcs[LOLFT].v);
		qd.Set(1, glseg.x1, ztop[0], glseg.y1, tcs[UPLFT].u, tcs[UPLFT].v);
		qd.Set(2, glseg.x2, ztop[1], glseg.y2, tcs[UPRGT].u, tcs[UPRGT].v);
		qd.Set(3, glseg.x2, zbottom[1], glseg.y2, tcs[LORGT].u, tcs[LORGT].v);
		qd.Render(GL_TRIANGLE_FAN);
		vertexcount += 4;
		return;
	}
	GLRenderer->mVBO->RenderArray(GL_TRIANGLE_FAN, vertindex, vertcount);
	vertexcount += vertcount;
}
Пример #4
0
//==========================================================================
//
// Draw the plane segment into the gap
//
//==========================================================================
void FDrawInfo::DrawFloodedPlane(wallseg * ws, float planez, sector_t * sec, bool ceiling)
{
	GLSectorPlane plane;
	int lightlevel;
	FColormap Colormap;
	FMaterial * gltexture;

	plane.GetFromSector(sec, ceiling);

	gltexture=FMaterial::ValidateTexture(plane.texture, false, true);
	if (!gltexture) return;

	if (gl_fixedcolormap) 
	{
		Colormap.Clear();
		lightlevel=255;
	}
	else
	{
		Colormap=sec->ColorMap;
		if (gltexture->tex->isFullbright())
		{
			Colormap.LightColor.r = Colormap.LightColor.g = Colormap.LightColor.b = 0xff;
			lightlevel=255;
		}
		else lightlevel=abs(ceiling? sec->GetCeilingLight() : sec->GetFloorLight());
	}

	int rel = getExtraLight();
	gl_SetColor(lightlevel, rel, Colormap, 1.0f);
	gl_SetFog(lightlevel, rel, &Colormap, false);
	gl_RenderState.SetMaterial(gltexture, CLAMP_NONE, 0, -1, false);

	float fviewx = ViewPos.X;
	float fviewy = ViewPos.Y;
	float fviewz = ViewPos.Z;

	gl_SetPlaneTextureRotation(&plane, gltexture);
	gl_RenderState.Apply();

	float prj_fac1 = (planez-fviewz)/(ws->z1-fviewz);
	float prj_fac2 = (planez-fviewz)/(ws->z2-fviewz);

	float px1 = fviewx + prj_fac1 * (ws->x1-fviewx);
	float py1 = fviewy + prj_fac1 * (ws->y1-fviewy);

	float px2 = fviewx + prj_fac2 * (ws->x1-fviewx);
	float py2 = fviewy + prj_fac2 * (ws->y1-fviewy);

	float px3 = fviewx + prj_fac2 * (ws->x2-fviewx);
	float py3 = fviewy + prj_fac2 * (ws->y2-fviewy);

	float px4 = fviewx + prj_fac1 * (ws->x2-fviewx);
	float py4 = fviewy + prj_fac1 * (ws->y2-fviewy);

	FQuadDrawer qd;
	qd.Set(0, px1, planez, py1, px1 / 64, -py1 / 64);
	qd.Set(1, px2, planez, py2, px2 / 64, -py2 / 64);
	qd.Set(2, px3, planez, py3, px3 / 64, -py3 / 64);
	qd.Set(3, px4, planez, py4, px4 / 64, -py4 / 64);
	qd.Render(GL_TRIANGLE_FAN);

	gl_RenderState.EnableTextureMatrix(false);
}
Пример #5
0
//==========================================================================
//
//
//
//==========================================================================
void GLWall::DrawDecal(DBaseDecal *decal)
{
	line_t * line=seg->linedef;
	side_t * side=seg->sidedef;
	int i;
	float zpos;
	int light;
	int rel;
	float a;
	bool flipx, flipy;
	DecalVertex dv[4];
	FTextureID decalTile;
	

	if (decal->RenderFlags & RF_INVISIBLE) return;
	if (type==RENDERWALL_FFBLOCK && gltexture->isMasked()) return;	// No decals on 3D floors with transparent textures.

	//if (decal->sprite != 0xffff)
	{
		decalTile = decal->PicNum;
		flipx = !!(decal->RenderFlags & RF_XFLIP);
		flipy = !!(decal->RenderFlags & RF_YFLIP);
	}
	/*
	else
	{
	decalTile = SpriteFrames[sprites[decal->sprite].spriteframes + decal->frame].lump[0];
	flipx = SpriteFrames[sprites[decal->sprite].spriteframes + decal->frame].flip & 1;
	}
	*/

	FTexture *texture = TexMan[decalTile];
	if (texture == NULL) return;

	FMaterial *tex;


	tex = FMaterial::ValidateTexture(texture, true);


	// the sectors are only used for their texture origin coordinates
	// so we don't need the fake sectors for deep water etc.
	// As this is a completely split wall fragment no further splits are
	// necessary for the decal.
	sector_t *frontsector;

	// for 3d-floor segments use the model sector as reference
	if ((decal->RenderFlags&RF_CLIPMASK)==RF_CLIPMID) frontsector=decal->Sector;
	else frontsector=seg->frontsector;

	switch (decal->RenderFlags & RF_RELMASK)
	{
	default:
		// No valid decal can have this type. If one is encountered anyway
		// it is in some way invalid so skip it.
		return;
		//zpos = decal->z;
		//break;

	case RF_RELUPPER:
		if (type!=RENDERWALL_TOP) return;
		if (line->flags & ML_DONTPEGTOP)
		{
			zpos = decal->Z + frontsector->GetPlaneTexZ(sector_t::ceiling);
		}
		else
		{
			zpos = decal->Z + seg->backsector->GetPlaneTexZ(sector_t::ceiling);
		}
		break;
	case RF_RELLOWER:
		if (type!=RENDERWALL_BOTTOM) return;
		if (line->flags & ML_DONTPEGBOTTOM)
		{
			zpos = decal->Z + frontsector->GetPlaneTexZ(sector_t::ceiling);
		}
		else
		{
			zpos = decal->Z + seg->backsector->GetPlaneTexZ(sector_t::floor);
		}
		break;
	case RF_RELMID:
		if (type==RENDERWALL_TOP || type==RENDERWALL_BOTTOM) return;
		if (line->flags & ML_DONTPEGBOTTOM)
		{
			zpos = decal->Z + frontsector->GetPlaneTexZ(sector_t::floor);
		}
		else
		{
			zpos = decal->Z + frontsector->GetPlaneTexZ(sector_t::ceiling);
		}
	}
	
	if (decal->RenderFlags & RF_FULLBRIGHT)
	{
		light = 255;
		rel = 0;
	}
	else
	{
		light = lightlevel;
		rel = rellight + getExtraLight();
	}
	
	FColormap p = Colormap;
	
	if (glset.nocoloredspritelighting)
	{
		p.Decolorize();
	}
	
	
	
	a = decal->Alpha;
	
	// now clip the decal to the actual polygon
	float decalwidth = tex->TextureWidth()  * decal->ScaleX;
	float decalheight= tex->TextureHeight() * decal->ScaleY;
	float decallefto = tex->GetLeftOffset() * decal->ScaleX;
	float decaltopo  = tex->GetTopOffset()  * decal->ScaleY;

	
	float leftedge = glseg.fracleft * side->TexelLength;
	float linelength = glseg.fracright * side->TexelLength - leftedge;

	// texel index of the decal's left edge
	float decalpixpos = (float)side->TexelLength * decal->LeftDistance - (flipx? decalwidth-decallefto : decallefto) - leftedge;

	float left,right;
	float lefttex,righttex;

	// decal is off the left edge
	if (decalpixpos < 0)
	{
		left = 0;
		lefttex = -decalpixpos;
	}
	else
	{
		left = decalpixpos;
		lefttex = 0;
	}
	
	// decal is off the right edge
	if (decalpixpos + decalwidth > linelength)
	{
		right = linelength;
		righttex = right - decalpixpos;
	}
	else
	{
		right = decalpixpos + decalwidth;
		righttex = decalwidth;
	}
	if (right<=left) return;	// nothing to draw

	// one texture unit on the wall as vector
	float vx=(glseg.x2-glseg.x1)/linelength;
	float vy=(glseg.y2-glseg.y1)/linelength;
		
	dv[1].x=dv[0].x=glseg.x1+vx*left;
	dv[1].y=dv[0].y=glseg.y1+vy*left;

	dv[3].x=dv[2].x=glseg.x1+vx*right;
	dv[3].y=dv[2].y=glseg.y1+vy*right;
		
	zpos+= (flipy? decalheight-decaltopo : decaltopo);

	dv[1].z=dv[2].z = zpos;
	dv[0].z=dv[3].z = dv[1].z - decalheight;
	dv[1].v=dv[2].v = tex->GetVT();

	dv[1].u=dv[0].u = tex->GetU(lefttex / decal->ScaleX);
	dv[3].u=dv[2].u = tex->GetU(righttex / decal->ScaleX);
	dv[0].v=dv[3].v = tex->GetVB();


	// now clip to the top plane
	float vzt=(ztop[1]-ztop[0])/linelength;
	float topleft=this->ztop[0]+vzt*left;
	float topright=this->ztop[0]+vzt*right;

	// completely below the wall
	if (topleft<dv[0].z && topright<dv[3].z) 
		return;

	if (topleft<dv[1].z || topright<dv[2].z)
	{
		// decal has to be clipped at the top
		// let texture clamping handle all extreme cases
		dv[1].v=(dv[1].z-topleft)/(dv[1].z-dv[0].z)*dv[0].v;
		dv[2].v=(dv[2].z-topright)/(dv[2].z-dv[3].z)*dv[3].v;
		dv[1].z=topleft;
		dv[2].z=topright;
	}

	// now clip to the bottom plane
	float vzb=(zbottom[1]-zbottom[0])/linelength;
	float bottomleft=this->zbottom[0]+vzb*left;
	float bottomright=this->zbottom[0]+vzb*right;

	// completely above the wall
	if (bottomleft>dv[1].z && bottomright>dv[2].z) 
		return;

	if (bottomleft>dv[0].z || bottomright>dv[3].z)
	{
		// decal has to be clipped at the bottom
		// let texture clamping handle all extreme cases
		dv[0].v=(dv[1].z-bottomleft)/(dv[1].z-dv[0].z)*(dv[0].v-dv[1].v) + dv[1].v;
		dv[3].v=(dv[2].z-bottomright)/(dv[2].z-dv[3].z)*(dv[3].v-dv[2].v) + dv[2].v;
		dv[0].z=bottomleft;
		dv[3].z=bottomright;
	}


	if (flipx)
	{
		float ur = tex->GetUR();
		for(i=0;i<4;i++) dv[i].u=ur-dv[i].u;
	}
	if (flipy)
	{
		float vb = tex->GetVB();
		for(i=0;i<4;i++) dv[i].v=vb-dv[i].v;
	}

	// calculate dynamic light effect.
	if (gl_lights && GLRenderer->mLightCount && !gl_fixedcolormap && gl_light_sprites)
	{
		// Note: This should be replaced with proper shader based lighting.
		double x, y;
		decal->GetXY(seg->sidedef, x, y);
		gl_SetDynSpriteLight(NULL, x, y, zpos, sub);
	}

	// alpha color only has an effect when using an alpha texture.
	if (decal->RenderStyle.Flags & STYLEF_RedIsAlpha)
	{
		gl_RenderState.SetObjectColor(decal->AlphaColor|0xff000000);
	}




	gl_SetRenderStyle(decal->RenderStyle, false, false);
	gl_RenderState.SetMaterial(tex, CLAMP_XY, decal->Translation, 0, !!(decal->RenderStyle.Flags & STYLEF_RedIsAlpha));


	// If srcalpha is one it looks better with a higher alpha threshold
	if (decal->RenderStyle.SrcAlpha == STYLEALPHA_One) gl_RenderState.AlphaFunc(GL_GEQUAL, gl_mask_sprite_threshold);
	else gl_RenderState.AlphaFunc(GL_GREATER, 0.f);


	gl_SetColor(light, rel, p, a);
	// for additively drawn decals we must temporarily set the fog color to black.
	PalEntry fc = gl_RenderState.GetFogColor();
	if (decal->RenderStyle.BlendOp == STYLEOP_Add && decal->RenderStyle.DestAlpha == STYLEALPHA_One)
	{
		gl_RenderState.SetFog(0,-1);
	}

	FQuadDrawer qd;
	for (i = 0; i < 4; i++)
	{
		qd.Set(i, dv[i].x, dv[i].z, dv[i].y, dv[i].u, dv[i].v);
	}

	if (lightlist == NULL)
	{
		gl_RenderState.Apply();
		qd.Render(GL_TRIANGLE_FAN);
	}
	else
	{
		for (unsigned k = 0; k < lightlist->Size(); k++)
		{
			secplane_t &lowplane = k == (*lightlist).Size() - 1 ? bottomplane : (*lightlist)[k + 1].plane;

			float low1 = lowplane.ZatPoint(dv[1].x, dv[1].y);
			float low2 = lowplane.ZatPoint(dv[2].x, dv[2].y);

			if (low1 < dv[1].z || low2 < dv[2].z)
			{
				int thisll = (*lightlist)[k].caster != NULL ? gl_ClampLight(*(*lightlist)[k].p_lightlevel) : lightlevel;
				FColormap thiscm;
				thiscm.FadeColor = Colormap.FadeColor;
				thiscm.CopyFrom3DLight(&(*lightlist)[k]);
				gl_SetColor(thisll, rel, thiscm, a);
				if (glset.nocoloredspritelighting) thiscm.Decolorize();
				gl_SetFog(thisll, rel, &thiscm, RenderStyle == STYLE_Add);
				gl_RenderState.SetSplitPlanes((*lightlist)[k].plane, lowplane);

				gl_RenderState.Apply();
				qd.Render(GL_TRIANGLE_FAN);
			}
			if (low1 <= dv[0].z && low2 <= dv[3].z) break;
		}
	}

	rendered_decals++;
	gl_RenderState.SetTextureMode(TM_MODULATE);
	gl_RenderState.SetObjectColor(0xffffffff);
	gl_RenderState.SetFog(fc,-1);
	gl_RenderState.SetDynLight(0,0,0);
}
Пример #6
0
void GLWall::RenderWall(int textured)
{
	gl_RenderState.Apply();
	gl_RenderState.ApplyLightIndex(dynlightindex);

#ifdef NO_VBO
    bool nosplit = !!(textured&RWF_NOSPLIT);
    bool split = (gl_seamless && !nosplit && seg->sidedef != NULL && !(seg->sidedef->Flags & WALLF_POLYOBJ) && !(flags & GLWF_NOSPLIT));

#if 1 // A bit quicker due to batching, still not very fast..
	glBegin(GL_TRIANGLE_FAN);

	// lower left corner
	if (textured&1) glTexCoord2f(tcs[0].u,tcs[0].v);
	glVertex3f(glseg.x1,zbottom[0],glseg.y1);

	//if (split && glseg.fracleft==0) SplitLeftEdge(tcs);

	// upper left corner
	if (textured&1) glTexCoord2f(tcs[1].u,tcs[1].v);
	glVertex3f(glseg.x1,ztop[0],glseg.y1);

	//if (split && !(flags & GLWF_NOSPLITUPPER)) SplitUpperEdge(tcs);

	// color for right side
	//if (color2) glColor4fv(color2);

	// upper right corner
	if (textured&1) glTexCoord2f(tcs[2].u,tcs[2].v);
	glVertex3f(glseg.x2,ztop[1],glseg.y2);

	//if (split && glseg.fracright==1) SplitRightEdge(tcs);

	// lower right corner
	if (textured&1) glTexCoord2f(tcs[3].u,tcs[3].v);
	glVertex3f(glseg.x2,zbottom[1],glseg.y2);

	//if (split && !(flags & GLWF_NOSPLITLOWER)) SplitLowerEdge(tcs);

	glEnd();

	vertexcount+=4;
#else

    static FFlatVertex vtx[100]; // Yes this is static. It's only used once, and I think it's faster as the address doesn't keep changing
    FFlatVertex *ptr = &vtx[0];

	ptr->Set(glseg.x1, zbottom[0], glseg.y1, tcs[LOLFT].u, tcs[LOLFT].v);
    ptr++;
    if (split && glseg.fracleft == 0) SplitLeftEdge(ptr);
    ptr->Set(glseg.x1, ztop[0], glseg.y1, tcs[UPLFT].u, tcs[UPLFT].v);
    ptr++;
    if (split && !(flags & GLWF_NOSPLITUPPER)) SplitUpperEdge(ptr);
    ptr->Set(glseg.x2, ztop[1], glseg.y2, tcs[UPRGT].u, tcs[UPRGT].v);
    ptr++;
    if (split && glseg.fracright == 1) SplitRightEdge(ptr);
    ptr->Set(glseg.x2, zbottom[1], glseg.y2, tcs[LORGT].u, tcs[LORGT].v);
    ptr++;
    if (split && !(flags & GLWF_NOSPLITLOWER)) SplitLowerEdge(ptr);

    // We can workout how many from the difference in pointers
    vertcount = (ptr - &vtx[0]);

    glTexCoordPointer(2,GL_FLOAT, sizeof(FFlatVertex),&vtx[0].u);
    glVertexPointer  (3,GL_FLOAT, sizeof(FFlatVertex),&vtx[0].x);

    glEnableClientState (GL_VERTEX_ARRAY);
    glEnableClientState (GL_TEXTURE_COORD_ARRAY);
    glDisableClientState (GL_COLOR_ARRAY);

    glBindBuffer (GL_ARRAY_BUFFER, 0); // NO VBO
    glDrawArrays (GL_TRIANGLE_FAN, 0, vertcount);

    vertexcount += vertcount;
    #endif
#else
	if (gl.buffermethod != BM_DEFERRED)
	{
		MakeVertices(!!(textured&RWF_NOSPLIT));
	}
	else if (vertcount == 0)
	{
		// This should never happen but in case it actually does, use the quad drawer as fallback (without edge splitting.)
		// This way it at least gets drawn.
		FQuadDrawer qd;
		qd.Set(0, glseg.x1, zbottom[0], glseg.y1, tcs[LOLFT].u, tcs[LOLFT].v);
		qd.Set(1, glseg.x1, ztop[0], glseg.y1, tcs[UPLFT].u, tcs[UPLFT].v);
		qd.Set(2, glseg.x2, ztop[1], glseg.y2, tcs[UPRGT].u, tcs[UPRGT].v);
		qd.Set(3, glseg.x2, zbottom[1], glseg.y2, tcs[LORGT].u, tcs[LORGT].v);
		qd.Render(GL_TRIANGLE_FAN);
		vertexcount += 4;
		return;
	}
	GLRenderer->mVBO->RenderArray(GL_TRIANGLE_FAN, vertindex, vertcount);
	vertexcount += vertcount;
#endif
}
Пример #7
0
void FGLRenderer::DrawPSprite (player_t * player,DPSprite *psp, float sx, float sy, bool hudModelStep, int OverrideShader, bool alphatexture)
{
	float			fU1,fV1;
	float			fU2,fV2;
	float			tx;
	float			x1,y1,x2,y2;
	float			scale;
	float			scalex;
	float			ftexturemid;
	
	// [BB] In the HUD model step we just render the model and break out. 
	if ( hudModelStep )
	{
		gl_RenderHUDModel(psp, sx, sy);
		return;
	}

	// decide which patch to use
	bool mirror;
	FTextureID lump = gl_GetSpriteFrame(psp->GetSprite(), psp->GetFrame(), 0, 0, &mirror);
	if (!lump.isValid()) return;

	FMaterial * tex = FMaterial::ValidateTexture(lump, true, false);
	if (!tex) return;

	gl_RenderState.SetMaterial(tex, CLAMP_XY_NOMIP, 0, OverrideShader, alphatexture);

	float vw = (float)viewwidth;
	float vh = (float)viewheight;

	FloatRect r;
	tex->GetSpriteRect(&r);

	// calculate edges of the shape
	scalex = (320.0f / (240.0f * WidescreenRatio)) * vw / 320;

	tx = sx - (160 - r.left);
	x1 = tx * scalex + vw/2;
	if (x1 > vw)	return; // off the right side
	x1 += viewwindowx;

	tx += r.width;
	x2 = tx * scalex + vw / 2;
	if (x2 < 0) return; // off the left side
	x2 += viewwindowx;


	// killough 12/98: fix psprite positioning problem
	ftexturemid = 100.f - sy - r.top;

	AWeapon * wi=player->ReadyWeapon;
	if (wi && wi->YAdjust != 0)
	{
		float fYAd = wi->YAdjust;
		if (screenblocks >= 11)
		{
			ftexturemid -= fYAd;
		}
		else if (!st_scale)
		{
			ftexturemid -= StatusBar->GetDisplacement () * fYAd;
		}
	}

	scale = (SCREENHEIGHT*vw) / (SCREENWIDTH * 200.0f);
	y1 = viewwindowy + vh / 2 - (ftexturemid * scale);
	y2 = y1 + (r.height * scale) + 1;

	if (!(mirror) != !(psp->Flags & PSPF_FLIP))
	{
		fU2 = tex->GetSpriteUL();
		fV1 = tex->GetSpriteVT();
		fU1 = tex->GetSpriteUR();
		fV2 = tex->GetSpriteVB();
	}
	else
	{
		fU1 = tex->GetSpriteUL();
		fV1 = tex->GetSpriteVT();
		fU2 = tex->GetSpriteUR();
		fV2 = tex->GetSpriteVB();
		
	}

	if (tex->GetTransparent() || OverrideShader != -1)
	{
		gl_RenderState.AlphaFunc(GL_GEQUAL, 0.f);
	}
	gl_RenderState.Apply();
	FQuadDrawer qd;
	qd.Set(0, x1, y1, 0, fU1, fV1);
	qd.Set(1, x1, y2, 0, fU1, fV2);
	qd.Set(2, x2, y1, 0, fU2, fV1);
	qd.Set(3, x2, y2, 0, fU2, fV2);
	qd.Render(GL_TRIANGLE_STRIP);
	gl_RenderState.AlphaFunc(GL_GEQUAL, 0.5f);
}