/* Test insert/update/select (but not setting/getting any lock info) on a table that supports locking. */
void BasicUpdateTests::update_on_lock_enabled_table ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaSample(), ArcSDETestConfig::ClassNameSample(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Zozo");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"LockProperty"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
FdoInt32 newId = 0;
if (reader->ReadNext())
newId = reader->GetInt32(AdjustRdbmsName(L"Id"));
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", AdjustRdbmsName(L"Id"), newId);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"LockProperty"));
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (AdjustRdbmsName(L"LockProperty"))));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameSample(), true);
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
void RfpTestRasterConversion::_setUp()
{
m_connection = CreateConnection();
CPPUNIT_ASSERT(m_connection != NULL);
FdoPtr<FdoIoStream> stream = FdoIoFileStream::Create(L"../../TestData/RGB/RGB.xml", L"r");
m_connection->SetConfiguration(stream);
m_connection->Open();
// execute the query
FdoICommand * cmd = m_connection->CreateCommand(FdoCommandType_Select);
FdoPtr<FdoISelect> cmdSelect = static_cast<FdoISelect*>(cmd);
cmdSelect->SetFeatureClassName(L"Photo");
FdoPtr<FdoIFeatureReader> reader = cmdSelect->Execute();
reader->ReadNext();
// get the raster
m_raster = reader->GetRaster(L"Image");
reader->Close();
}
EGwsStatus CGwsFdoInsertCommand::Execute (CGwsMutableFeature & feat)
{
Clear ();
EGwsStatus fdoes = eGwsOk;
if(!m_bIsPrepared) {
PushStatus (eGwsFdoCommandIsNotPrepared);
return eGwsFdoCommandIsNotPrepared;
}
try
{
GetPropertyValues (); // initialize property value collection
eGwsOkThrow(SetProperties (feat, true)) ;
FdoPtr<FdoIFeatureReader> pReader = ((FdoIInsert*)m_pCommand.p)->Execute();
//!FDO may return null pointer even if the command succeed. So remove the following assert.
//assert (pReader != NULL);
// Read assigned Id
if( pReader != NULL )
{
if (pReader->ReadNext()) {
// Read the key of just inserted record
//
CGwsDataValueCollection * keyvals = NULL;
for (FdoInt32 idx = 0; m_identity != NULL && idx < m_identity->GetCount (); idx ++) {
FdoPtr<FdoDataPropertyDefinition> keyprop =
m_identity->GetItem (idx);
FdoPtr<FdoDataValue> val =
GwsQueryUtils::GetDataPropertyValue (pReader,
keyprop->GetDataType (),
keyprop->GetName ());
if (val == NULL)
continue;
if (keyvals == NULL)
keyvals = (CGwsDataValueCollection *) CGwsDataValueCollection::Create ();
keyvals->Add (val);
feat.SetValue (keyprop->GetName (),val);
}
#ifdef OBJECT_PROPERTIES
//insert object property values that were cached in SetProperties()
if(!m_objPropNames.empty())
{
//Get object property class instance array that was cached in SetProperties()
int numProps = m_objPropNames.size();
for( int i = 0; i<numProps; i++)
{
const std::wstring strPropName = m_objPropNames[i];
const std::wstring objectClassName =
acmapFdoUtils::constructObjectClassName(aTOw(m_classname.Class()),strPropName.c_str());
//get the object property values
AcMapFdoFeatureIterator* featIter = NULL;
eGwsOkThrow(feature.GetFeature(wTOa(strPropName.c_str()),featIter));
assert(featIter != NULL);
//insert the primary keys of the parent feature and the object property values
eGwsOkThrow(InsertObjectProperties(objectClassName.c_str(), valList, featIter));
}
}
#endif
// long ver;
// Read sequence number
if (!m_revisionprop.empty()) {
FdoInt32 revnum = pReader->GetInt32 (m_revisionprop.c_str ());
feat.SetRevisionNumber (revnum);
}
feat.SetFeatureId (GWSFeatureId (keyvals));
}
pReader->Close();
}
} catch(FdoException *e) {
PushFdoException (eGwsFailedToExecuteCommand, e);
e->Release();
fdoes = eGwsFailedToExecuteCommand;
} catch(EGwsStatus es) {
PushStatus (es);
fdoes = es;
}
ReleasePropertyValues (); // releases property value collection
return fdoes;
}
void MySqlFdoInsertTest::insertDate ()
{
wprintf(L"InsertDate: Test insert command with different date/time settings.\n");
FdoPtr<FdoIConnection> connection = UnitTestUtil::GetConnection(mSuffix, true);
int baseColorIndex = 990,
numberTestCases = 9;
bool exceptionExpected = false;
FdoStringP colorIndex;
FdoDateTime dateTime;
for (int j = 0; j < numberTestCases; j++)
{
// Reinitialize the date-time object as defined by the constructor.
dateTime.year = -1;
dateTime.month = -1;
dateTime.day = -1;
dateTime.hour = -1;
dateTime.minute = -1;
dateTime.seconds = 0.0f;;
colorIndex = FdoStringP::Format(L"%d", (baseColorIndex+j));
switch (j)
{
case 0:
wprintf(L" > (1) No date or time specification: should fail.\n");
exceptionExpected = true;
break;
case 1:
wprintf(L" > (2)Complete date, but no time specification: should work.\n");
dateTime.year = 2003;
dateTime.month = 1;
dateTime.day = 1;
exceptionExpected = false;
break;
case 2:
wprintf(L" > (3) Complete time, but no date specification: should work.\n");
dateTime.hour = 1;
dateTime.minute = 11;
dateTime.seconds = 0;
exceptionExpected = false;
break;
case 3:
wprintf(L" > (4) Complete date and time specification: should work.\n");
dateTime.year = 2003;
dateTime.month = 1;
dateTime.day = 1;
dateTime.hour = 1;
dateTime.minute = 11;
dateTime.seconds = 11;
exceptionExpected = false;
break;
case 4:
wprintf(L" > (5) Partial date, but no time specification: should fail.\n");
dateTime.year = 2003;
dateTime.day = 1;
exceptionExpected = true;
break;
case 5:
wprintf(L" > (6) Partial time, but no date specification: should fail.\n");
dateTime.hour = 1;
dateTime.seconds = 0;
exceptionExpected = true;
break;
case 6:
wprintf(L" > (7) Partial date and time specification: should fail.\n");
dateTime.year = 2003;
dateTime.day = 1;
dateTime.hour = 1;
dateTime.seconds = 0;
exceptionExpected = true;
break;
case 7:
wprintf(L" > (8) Partial date and complete time specification: should fail.\n");
dateTime.year = 2003;
dateTime.day = 1;
dateTime.hour = 1;
dateTime.minute = 11;
dateTime.seconds = 0;
exceptionExpected = true;
break;
case 8:
wprintf(L" > (9) Partial time and complete date specification: should fail.\n");
dateTime.year = 2003;
dateTime.month = 1;
dateTime.day = 1;
dateTime.hour = 1;
dateTime.seconds = 0;
exceptionExpected = true;
break;
}
// Attempt to insert a record using the constructed date-time object.
try
{
FdoInsertTest::insertDate(connection, dateTime, colorIndex);
}
catch (FdoException *ex)
{
if (!exceptionExpected)
{
wprintf(L" Unexpected Exception: %ls\n", ex->GetExceptionMessage());
connection->Close();
UnitTestUtil::FailOnException(ex);
}
wchar_t expectedErrMsg[] = L"Incomplete date/time setting. ";
FdoString *excMsg = ex->GetExceptionMessage();
// eliminate a space from the end if is the case
if (excMsg[wcslen(excMsg) - 1] != L' ')
expectedErrMsg[wcslen(expectedErrMsg)-1] = L'\0';
if ((wcscmp(excMsg, expectedErrMsg)) != 0)
{
wprintf(L" Unexpected Exception: %ls\n", ex->GetExceptionMessage());
connection->Close();
UnitTestUtil::FailOnException(ex);
}
else
wprintf(L" Expected Exception: %ls\n", ex->GetExceptionMessage());
ex->Release();
}
catch ( ... )
{
connection->Close();
UnitTestUtil::FailOnException(FdoException::Create(L" Unexpected Exception in insertDate()\n"));
}
}
wprintf(L" > Test Verification.\n");
insertDateVerification(connection, 3);
wprintf(L" > Test Cleanup.\n");
FdoInsertTest::insertDateCleanUp(connection);
connection->Close();
}
void RfpTestEcw::testRGB()
{
FdoPtr<FdoIConnection> connection = CreateConnection();
FdoPtr<FdoIoStream> stream = FdoIoFileStream::Create(L"../../TestData/Ecw/Adelaide_sample.xml", L"r");
connection->SetConfiguration(stream);
connection->Open();
FdoICommand* cmd = connection->CreateCommand(FdoCommandType_Select);
FdoPtr<FdoISelect> cmdSelect = dynamic_cast<FdoISelect*>(cmd);
cmdSelect->SetFeatureClassName(L"Photo");
FdoPtr<FdoIFeatureReader> featureReader = cmdSelect->Execute();
CPPUNIT_ASSERT(featureReader->ReadNext());
FdoPtr<FdoIRaster> raster = featureReader->GetRaster(L"Image");
FdoInt32 xSize = raster->GetImageXSize();
FdoInt32 ySize = raster->GetImageYSize();
CPPUNIT_ASSERT(xSize == 2814);
CPPUNIT_ASSERT(ySize == 2187);
FdoPtr<FdoRasterDataModel> dataModel = raster->GetDataModel();
CPPUNIT_ASSERT(dataModel->GetBitsPerPixel() == 32);
CPPUNIT_ASSERT(dataModel->GetDataModelType() == FdoRasterDataModelType_RGBA);
CPPUNIT_ASSERT(dataModel->GetTileSizeX() == raster->GetImageXSize());
CPPUNIT_ASSERT(dataModel->GetTileSizeY() == raster->GetImageYSize());
const FdoInt32 tileSizeX = 1024, tileSizeY = 1024;
dataModel->SetTileSizeX(tileSizeX);
dataModel->SetTileSizeY(tileSizeY);
raster->SetDataModel(dataModel);
FdoPtr<FdoIStreamReaderTmpl<FdoByte> > reader = dynamic_cast<FdoIStreamReaderTmpl<FdoByte>*>(raster->GetStreamReader());
int numTileRows = (2187 - 1) / tileSizeX + 1;
int numTileCols = (2814 - 1) / tileSizeY + 1;
const int bytesTile = tileSizeX * tileSizeY * 4;
FdoByte* buffer = new FdoByte[bytesTile];
for (int i = 0; i < numTileRows; i++)
{
// read the first tile of the tile row
FdoInt32 numRead = reader->ReadNext(buffer, 0, bytesTile);
CPPUNIT_ASSERT(numRead == bytesTile);
// skip the rest tiles
reader->Skip(bytesTile * (numTileCols - 1));
}
// no data
CPPUNIT_ASSERT(reader->ReadNext(buffer, 0, 1) == 0);
delete buffer;
// scale down to 1/4 of original size and read it row by row
raster->SetImageXSize(703);
raster->SetImageYSize(546);
dataModel->SetTileSizeX(raster->GetImageXSize());
dataModel->SetTileSizeY(raster->GetImageYSize());
raster->SetDataModel(dataModel);
reader = dynamic_cast<FdoIStreamReaderTmpl<FdoByte>*>(raster->GetStreamReader());
// iterate all rows
FdoByte buff[2816]; //2816=703*4+4
for (int row = 0; row < 546; row++)
{
FdoInt32 numRead = reader->ReadNext(buff, 0, 2816);
CPPUNIT_ASSERT(numRead == 2816);
}
CPPUNIT_ASSERT(reader->ReadNext(buff, 0, 1) == 0);
connection->Close();
}
void FdoSchemaRollbackTest::DoTest ( bool bPreClear, const wchar_t* schemaName, bool bRollbackOnly, bool bCommit )
{
FdoPtr<FdoIConnection> connection;
StaticConnection* staticConn = NULL;
FdoSchemaManagerP mgr;
const FdoSmLpSchemaCollection* lp = NULL;
// All of these tests exercise the Schema Manager but only one test
// exercises sometime that can currently happen in FDO. Therefore,
// to save time ...
// mode.
if ( bPreClear || (wcslen(schemaName) > 0) || (!bRollbackOnly) || bCommit ) {
// these other tests are skipped by default.
if ( !UnitTestUtil::DoThisTest( "rollback" ) )
return;
}
try {
// delete, re-create and open the datastore
printf( "Initializing Connection ... \n" );
connection = UnitTestUtil::CreateConnection(
true,
true,
DB_NAME_SUFFIX,
NULL,
NULL,
0
);
staticConn = UnitTestUtil::NewStaticConnection();
staticConn->connect();
staticConn->SetSchema( DB_NAME_SUFFIX );
// The following tests must be run in the following order to get the expected results.
printf( "Creating Acad Schema ... \n" );
CreateAcadSchema( connection );
printf( "Creating Electric Schema ... \n" );
CreateElectricSchema( connection );
// At this point all schema elements are in the rollback cache. The following
// conditionally does a rollback, which clears the rollback cache. This means
// that only subsequently modified elements will be later rolled back when
// bRollbackOnly is true.
if ( bPreClear ) {
FdoPtr<FdoITransaction> clearTrans = connection->BeginTransaction();
clearTrans->Rollback();
}
// Grab snapshot of original MetaSchema ( for debugging ).
printf( "Writing Original Schema ... \n" );
FdoSchemaManagerP mgr = staticConn->CreateSchemaManager();
const FdoSmLpSchemaCollection* lp = mgr->RefLogicalPhysicalSchemas();
lp->XMLSerialize( UnitTestUtil::GetOutputFileName( L"schema_rollback_orig.xml" ) );
printf( "Deleting some tables ... \n" );
// Do some deletes outside of the schema manager. These tables will not be re-created
// bPreClear and bRollbackOnly are true, since these tables won't be in the
// rollback cache.
FdoSmPhMgrP phMgr = mgr->GetPhysicalSchema();
FdoSmPhDbObjectP pObject = phMgr->FindDbObject( phMgr->GetDcDbObjectName(L"Conductor"), L"", L"", false );
pObject->SetElementState( FdoSchemaElementState_Deleted );
pObject->Commit();
pObject = phMgr->FindDbObject( phMgr->GetDcDbObjectName(L"AcDbEntity_AcXData"), L"", L"", false );
pObject->SetElementState( FdoSchemaElementState_Deleted );
pObject->Commit();
FdoPtr<FdoITransaction> trans1 = connection->BeginTransaction();
printf( "Modifying Acad Schema ... \n" );
ModAcadSchema( connection );
printf( "Modifying Electric Schema ... \n" );
ModElectricSchema( connection );
printf( "Performing rollback ... \n" );
if ( bCommit ) {
// Commit before rollback if asked to. In this case, rollback will not
// have any physical schema synchronizations to perform.
trans1->Commit();
trans1 = connection->BeginTransaction();
}
if ( (wcslen(schemaName) == 0) && bRollbackOnly ) {
// Transaction rollback invokes SynchPhysical on all schemas ( synchronize
// rollbacks only ) so exercise it in this case.
trans1->Rollback();
}
else {
// For other cases, call SynchPhysical directly, after low-level rollback.
UnitTestUtil::Sql2Db( L"rollback", connection );
mgr = staticConn->CreateSchemaManager();
mgr->SynchPhysical( schemaName, bRollbackOnly );
}
// Write out the resulting metaschema
printf( "Writing Schema after Rollback ... \n" );
mgr = staticConn->CreateSchemaManager();
lp = mgr->RefLogicalPhysicalSchemas();
lp->XMLSerialize( OutFileName(bPreClear, schemaName, bRollbackOnly, bCommit) );
try {
trans1 = NULL;
}
catch ( ... ) {
}
printf( "Closing Connection ... \n" );
UnitTestUtil::CloseConnection( connection, false, DB_NAME_SUFFIX );
// Compare results with expected results.
// Todo: check SqlServer and MySql results.
#ifdef RDBI_DEF_ORA
UnitTestUtil::CheckOutput(
MasterFileName(bPreClear, schemaName, bRollbackOnly, bCommit),
OutFileName(bPreClear, schemaName, bRollbackOnly, bCommit)
);
#endif
phMgr = NULL;
mgr = NULL;
delete staticConn;
}
catch ( FdoException* e )
{
if ( staticConn )
delete staticConn;
try {
if ( connection )
connection->Close();
}
catch ( ... )
{
}
UnitTestUtil::FailOnException( e );
}
catch ( CppUnit::Exception e )
{
if ( staticConn )
delete staticConn;
if ( connection )
connection->Close();
throw;
}
catch (...)
{
if ( staticConn )
delete staticConn;
if ( connection )
connection->Close();
CPPUNIT_FAIL ("caught unexpected exception");
}
printf( "Done\n" );
}
/// <summary>Executes the release lock command, returning an FdoILockConflictReader.</summary>
/// <returns>Returns an FdoILockConflictReader</returns>
FdoILockConflictReader* ArcSDEReleaseLockCommand::Execute ()
{
const CHAR* columns[1];
FdoPtr<ArcSDEConnection> connection;
CHAR table[SE_QUALIFIED_TABLE_NAME];
CHAR column[SE_MAX_COLUMN_LEN];
wchar_t* wcolumn;
CHAR *where;
SHORT count;
SE_FILTER* filters;
FdoString* property;
LONG result;
SE_STREAM stream;
CHAR user_name[SE_MAX_OWNER_LEN];
wchar_t* me;
CHAR logfile[SE_MAX_PATH_LEN];
SE_SQL_CONSTRUCT sql_construct;
CHAR* tables[1];
FdoPtr<FdoISQLDataReader> reader;
SE_LOG log;
LONG number = 0;
Lock* locks = NULL;
wchar_t* locktable = NULL;
FdoPtr<ArcSDELockConflictReader> ret;
// verify the connection
connection = static_cast<ArcSDEConnection*>(GetConnection ());
if (connection == NULL)
throw FdoException::Create (NlsMsgGet (ARCSDE_CONNECTION_NOT_ESTABLISHED, "Connection not established."));
// verify the feature class name is specified
if (mClassName == NULL)
throw FdoException::Create (NlsMsgGet (ARCSDE_FEATURE_CLASS_UNSPECIFIED, "Feature class name not specified."));
// get the class definition which reflects the requested feature class name
FdoPtr<FdoClassDefinition> definition = connection->GetRequestedClassDefinition (mClassName);
// get the filter if any
FdoPtr<FdoFilter> filter = GetFilter ();
// get SQL query's "from" table list
mConnection->ClassToTable (table, definition);
// ensure lockable table
if (!ArcSDELockUtility::IsLockable (connection->GetConnection (), table, column))
{
wchar_t* wtable;
sde_multibyte_to_wide (wtable, table);
throw FdoException::Create (NlsMsgGet1 (ARCSDE_LOCKING_NOT_ENABLED, "Table '%1$ls' is not lock enabled.", wtable));
}
// get the property name that is the row_id
sde_multibyte_to_wide (wcolumn, column);
property = connection->ColumnToProperty (definition, wcolumn);
// get SQL query's "where" clause & spatial filters
where = NULL;
count = 0;
filters = NULL;
GetFilterInfo (connection, filter, definition, where, count, filters);
// establish an empty conflict reader
ret = new ArcSDELockConflictReader (connection, definition->GetQualifiedName (), table, property);
// initialize the stream query
result = SE_stream_create (connection->GetConnection (), &stream);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_ALLOC, "Cannot initialize SE_STREAM structure.");
// if necessary, version enable the stream
ArcSDELongTransactionUtility::VersionStream (connection, stream, table, false);
// release lock, don't return rows
result = SE_connection_get_user_name (connection->GetConnection (), user_name);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_USER_UNKNOWN, "Cannot determine current user.");
sde_multibyte_to_wide (me, user_name);
if (0 == wcscmp (GetLockOwner (), L""))
{
result = SE_stream_set_rowlocking (stream, SE_ROWLOCKING_UNLOCK_ON_QUERY
| SE_ROWLOCKING_LOCK_ONLY);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_LOCK, "Cannot set row locking on the stream.");
}
else if (0 == wcscmp (GetLockOwner (), me))
{
result = SE_stream_set_rowlocking (stream, SE_ROWLOCKING_UNLOCK_ON_QUERY
| SE_ROWLOCKING_FILTER_MY_LOCKS | SE_ROWLOCKING_LOCK_ONLY);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_LOCK, "Cannot set row locking on the stream.");
}
else
{
LONG *ids = NULL;
CHAR **users = NULL;
CHAR lt[SE_QUALIFIED_TABLE_NAME];
if (0)
throw FdoCommandException::Create (NlsMsgGet (ARCSDE_RELEASE_UNOWNED_LOCKS, "Releasing other owners locks is not supported."));
result = SE_table_get_rowlocks (connection->GetConnection(), table, &number, &ids, &users);
handle_sde_err<FdoCommandException>(connection->GetConnection(), result, __FILE__, __LINE__, ARCSDE_GET_ROW_LOCK_LIST_FAILED, "Failed to get the row lock list.");
if (0 != number)
{
// put the id's and users in an array of lock structures
locks = (Lock*)calloc (number, sizeof (Lock));
for (int i = 0; i < number; i++)
{
locks[i].id = ids[i];
sde_strcpy (sde_pus2wc(locks[i].user), sde_pcus2wc(users[i]));
}
qsort (locks, number, sizeof (LONG), compare);
ArcSDELockUtility::LockTableName (lt, connection, table);
sde_multibyte_to_wide (locktable, lt);
SE_table_free_rowlocks_list (number, ids, users);
}
}
// apply attribute and spatial query to stream
columns[0] = column;
ApplyFilterInfoToStream (connection, stream, table, where, 1, columns, count, filters);
// set up a temporary log file
mConnection->MakeLog (&log, table);
// accumulate the query in the log file
result = SE_stream_set_logfile (stream, log, FALSE);
handle_sde_err<FdoCommandException> (stream, result, __FILE__, __LINE__, ARCSDE_LOG_SET_LOGFILE, "Could not set log file.");
// lock the table's lock table to prevent alteration
reader = ArcSDELockUtility::LockLockTable (mConnection, table);
// actually execute the query
result = SE_stream_execute (stream);
handle_sde_err<FdoCommandException>(stream, result, __FILE__, __LINE__, ARCSDE_STREAM_EXECUTE, "Stream execute failed.");
result = SE_stream_fetch (stream);
// three possibilities: locks for the specified user exist (SE_SUCCESS) and the log file isn't filled,
// everything was unlocked (SE_FINISHED)
// or there was a conflict (SE_LOCK_CONFLICT)
switch (result)
{
case SE_SUCCESS:
if (0 != number)
{
CHAR* user;
LONG id;
wchar_t drop[1024];
FdoPtr<FdoISQLCommand> sql;
Lock key;
Lock* item;
// Get lock owner name:
const wchar_t *wLockOwner = GetLockOwner();
wchar_t *wLockOwnerUpr = (wchar_t*)alloca( (1+wcslen(wLockOwner)) * sizeof(wchar_t));
wcscpy(wLockOwnerUpr, wLockOwner);
FdoCommonOSUtil::wcsupr(wLockOwnerUpr); // ToDo: Oracle-specific
sde_wide_to_multibyte (user, wLockOwnerUpr);
// process each row returned (ignoring the log file)
sql = (FdoISQLCommand*)connection->CreateCommand (FdoCommandType_SQLCommand);
do
{
if (SE_SUCCESS != (result = SE_stream_get_integer (stream, 1, &id)))
{
sde_multibyte_to_wide (wcolumn, column);
handle_sde_err<FdoCommandException> (stream, result, __FILE__, __LINE__, ARCSDE_STREAM_GET, "Stream get ('%1$ls') failed for column '%2$ls'.", L"SE_stream_get_integer", wcolumn);
}
else
{
key.id = id;
// look it up to see if it's a conflict (i.e. not found)
if (NULL != (item = (Lock*)bsearch (&key, locks, number, sizeof (LONG), compare)))
{
if (0 == sde_strcmp (sde_pcus2wc(user), sde_pcus2wc(item->user)))
{
// ToDo: optimize this singleton delete somewhat
//ROW_ID NOT NULL NUMBER(38)
//USER_NAME NOT NULL VARCHAR2(32)
FdoCommonOSUtil::swprintf (drop, ELEMENTS (drop), L"delete from %ls where user_name=upper('%ls') and row_id = %ld", locktable, GetLockOwner (), id);
sql->SetSQLStatement (drop);
sql->ExecuteNonQuery ();
}
else
ret->AddIdentity (id);
}
else
{
// no lock, hence no conflict
}
}
}
while (SE_SUCCESS == (result = SE_stream_fetch (stream)));
if (SE_FINISHED != result)
handle_sde_err<FdoCommandException> (stream, result, __FILE__, __LINE__, ARCSDE_STREAM_FETCH, "Stream fetch failed.");
}
break;
case SE_FINISHED:
break;
case SE_LOCK_CONFLICT:
// reuse the same stream
result = SE_stream_close (stream, TRUE);
// if necessary, version enable the stream
ArcSDELongTransactionUtility::VersionStream (connection, stream, table, false);
// select locks still remaining
result = SE_stream_set_rowlocking (stream, SE_ROWLOCKING_FILTER_OTHER_LOCKS);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_LOCK, "Cannot set row locking on the stream.");
// get the list of row ids from the log file
tables[0] = table;
sql_construct.tables = tables;
sql_construct.num_tables = ELEMENTS (tables);
sql_construct.where = NULL;
ArcSDELockUtility::GetLogFile (logfile, connection->GetConnection (), log);
result = SE_stream_query_logfile (stream, logfile, 1, columns, &sql_construct);
handle_sde_err<FdoCommandException>(stream, result, __FILE__, __LINE__, ARCSDE_LOG_FILE_QUERY, "Unable to query log file.");
// execute the query that fetches conflicts
result = SE_stream_execute (stream);
handle_sde_err<FdoCommandException>(stream, result, __FILE__, __LINE__, ARCSDE_STREAM_EXECUTE, "Stream execute failed.");
// gather the conflicts
ArcSDELockUtility::GatherConflicts (stream, column, 1, ret);
// if there were conflicts (and there will be), do a partial unlock
if (0 != ret->mIds->GetCount ())
{
// reuse the same stream
result = SE_stream_close (stream, TRUE);
// if necessary, version enable the stream
ArcSDELongTransactionUtility::VersionStream (connection, stream, table, false);
// select locks still remaining
result = SE_stream_set_rowlocking (stream, SE_ROWLOCKING_FILTER_MY_LOCKS | SE_ROWLOCKING_UNLOCK_ON_QUERY | SE_ROWLOCKING_LOCK_ONLY);
handle_sde_err<FdoCommandException> (connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_LOCK, "Cannot set row locking on the stream.");
// get the list of row ids from the log file
result = SE_stream_query_logfile (stream, logfile, 1, columns, &sql_construct);
handle_sde_err<FdoCommandException>(stream, result, __FILE__, __LINE__, ARCSDE_LOG_FILE_QUERY, "Unable to query log file.");
// execute the query that unlocks rows
result = SE_stream_execute (stream);
handle_sde_err<FdoCommandException>(stream, result, __FILE__, __LINE__, ARCSDE_STREAM_EXECUTE, "Stream execute failed.");
}
else
throw FdoException::Create (NlsMsgGet(ARCSDE_UNEXPECTED_ERROR, "Unexpected error encountered in ArcSDE Provider."));
break;
default:
handle_sde_err<FdoCommandException> (stream, result, __FILE__, __LINE__, ARCSDE_STREAM_FETCH, "Stream fetch failed.");
}
// release the transaction lock
if (reader != NULL)
reader->Close ();
// clean up
if (NULL != locks)
free(locks);
result = SE_stream_free (stream);
handle_sde_err<FdoCommandException>(connection->GetConnection (), result, __FILE__, __LINE__, ARCSDE_STREAM_FREE, "Stream free failed.");
delete[] where;
if (NULL != filters)
{
for (int i = 0; i < count; i++)
if (NULL != filters[i].filter.shape)
SE_shape_free (filters[i].filter.shape);
delete[] filters;
}
return (FDO_SAFE_ADDREF (ret.p));
}
void FdoSpatialContextTest::DoTest( bool hasMetaSchema )
{
FdoPtr<FdoIConnection> connection;
StaticConnection* staticConn = NULL;
try {
if ( !hasMetaSchema ) {
staticConn = UnitTestUtil::NewStaticConnection();
staticConn->connect();
UnitTestUtil::CreateDBNoMeta(
staticConn->CreateSchemaManager(),
UnitTestUtil::GetEnviron("datastore", DB_NAME_SUFFIX)
);
}
// delete, re-create and open the datastore
printf( "Initializing Connection ... \n" );
connection = UnitTestUtil::CreateConnection(
hasMetaSchema,
hasMetaSchema,
DB_NAME_SUFFIX,
0,
NULL,
0
);
printf( "Creating Spatial Contexts ... \n" );
UnitTestUtil::CreateSpatialContext( connection, L"Bermuda", L"Bermuda 1957", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"Rectangular", L"", 0, 0, 1000, 1000 );
UnitTestUtil::CreateSpatialContext( connection, L"Bermuda Duplicate", L"Bermuda 1957", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"Luxembourg Delete", L"Luxembourg 1930", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"South", L"Australian Antarctic", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"sc_2", L"Puerto Rico", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"South Delete", L"Australian Antarctic", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"sc_1", L"NAD27", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"South Duplicate", L"Australian Antarctic", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"Liberia by WKT", L"", 0, 0, 10, 10, L"GEOGCS[\"Liberia 1964\", DATUM[\"Liberia 1964\", ELLIPSOID[\"Clarke 1880 (RGS)\", 6378249.145, 293.465]], PRIMEM[\"Greenwich\", 0], UNIT[\"Degree\", 0.0174532925199433]]" );
UnitTestUtil::CreateSpatialContext( connection, L"Qatar wrong name", L"Bermuda 1957", 0, 0, 10, 10, L"GEOGCS[\"Qatar 1974\", DATUM[\"Qatar 1974\", ELLIPSOID[\"International 1924\", 6378388, 297]], PRIMEM[\"Greenwich\", 0], UNIT[\"Degree\", 0.0174532925199433]]" );
UnitTestUtil::CreateSpatialContext( connection, L"California", L"CA-I", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"Bermuda Mentor", L"Bermuda.LL", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"Mentor by WKT", L"", 0, 0, 10, 10, L"PROJCS[\"Quebec test\",GEOGCS[\"For testing only\",DATUM[\"Test\",SPHEROID[\"NAD 27\",6300000,123.465,]]]]" );
UnitTestUtil::CreateSpatialContext( connection, L"Rectangular (Metre)", L"XY-M", 0, 0, 10, 10);
UnitTestUtil::CreateSpatialContext( connection, L"Rectangular (Feet)", L"XY-FT", 0, 0, 10, 10);
connection->Close();
connection->Open();
printf( "Deleting Spatial Contexts ... \n" );
UnitTestUtil::DeleteSpatialContext( connection, L"Luxembourg Delete" );
UnitTestUtil::DeleteSpatialContext( connection, L"South Delete" );
connection->Close();
connection->Open();
CreateSchema( connection, hasMetaSchema );
printf( "Writing output ... \n" );
FdoStringP datastore = UnitTestUtil::GetEnviron("datastore", DB_NAME_SUFFIX);
FdoIoMemoryStreamP stream1 = FdoIoMemoryStream::Create();
FdoXmlSpatialContextFlagsP flags = FdoXmlSpatialContextFlags::Create(
L"fdo.osgeo.org/schemas/feature",
FdoXmlFlags::ErrorLevel_Normal,
true,
FdoXmlSpatialContextFlags::ConflictOption_Add,
true
);
UnitTestUtil::ExportDb(
connection,
stream1,
flags,
false,
FdoStringP(L"Fdo") + datastore
);
UnitTestUtil::Config2SortedFile( stream1, UnitTestUtil::GetOutputFileName( GenFileName(1, hasMetaSchema, false) ) );
UnitTestUtil::CheckOutput(
GenFileName( 1, hasMetaSchema, true ),
UnitTestUtil::GetOutputFileName( GenFileName(1, hasMetaSchema, false) )
);
InsertFeatures( connection );
stream1 = FdoIoMemoryStream::Create();
UnitTestUtil::ExportDb(
connection,
stream1,
flags,
false,
FdoStringP(L"Fdo") + datastore,
L"AutoGen",
true
);
UnitTestUtil::Config2SortedFile( stream1, UnitTestUtil::GetOutputFileName( GenFileName(2, hasMetaSchema, false) ) );
UnitTestUtil::CheckOutput(
GenFileName( 2, hasMetaSchema, true ),
UnitTestUtil::GetOutputFileName( GenFileName(2, hasMetaSchema, false) )
);
if ( !hasMetaSchema ) {
CreateTables( staticConn, datastore );
connection->Close();
connection->Open();
stream1 = FdoIoMemoryStream::Create();
UnitTestUtil::ExportDb(
connection,
stream1,
flags,
false,
FdoStringP(L"Fdo") + datastore,
L"AutoGen",
true
);
UnitTestUtil::Config2SortedFile( stream1, UnitTestUtil::GetOutputFileName( GenFileName(3, hasMetaSchema, false) ) );
UnitTestUtil::CheckOutput(
GenFileName( 3, hasMetaSchema, true ),
UnitTestUtil::GetOutputFileName( GenFileName(3, hasMetaSchema, false) )
);
try {
UnitTestUtil::CreateSpatialContext( connection, L"Nowhere", L"JunkCS", 0, 0, 10, 10 );
CPPUNIT_FAIL( "Setting unsupported coordinate system by name supposed to fail" );
}
catch (FdoException* e ) {
#ifdef _WIN32
#ifdef _DEBUG
FdoStringP expectedMessage = L" Error creating spatial context Nowhere, coordinate system JunkCS is not in current datastore. ";
FdoString* pMessage = wcschr( e->GetExceptionMessage(), ')' );
if (pMessage) pMessage++;
#else
FdoStringP expectedMessage = L"Error creating spatial context Nowhere, coordinate system JunkCS is not in current datastore. ";
FdoString* pMessage = e->GetExceptionMessage();
#endif
CPPUNIT_ASSERT( pMessage && expectedMessage.ICompare(pMessage) == 0 );
#endif
FDO_SAFE_RELEASE(e);
}
try {
UnitTestUtil::CreateSpatialContext( connection, L"California2", L"", 0, 0, 10, 10, L"PROJCS[\"CA-I\",GEOGCS[\"LL27\",DATUM[\"NAD27\",SPHEROID[\"CLRK66\",60.400,294.97869821]],PRIMEM[\"Greenwich\",0],UNIT[\"Degree\",0.017453292519943295]],PROJECTION[\"Lambert_Conformal_Conic_2SP\"],PARAMETER[\"false_easting\",2000000.000],PARAMETER[\"false_northing\",0.000],PARAMETER[\"central_meridian\",-122.00000000000000],PARAMETER[\"latitude_of_origin\",39.33333333333333],PARAMETER[\"standard_parallel_1\",41.66666666666666],PARAMETER[\"standard_parallel_2\",40.00000000000000],UNIT[\"Foot_US\",0.30480060960122]]" );
CPPUNIT_FAIL( "Setting unsupported coordinate system by wkt supposed to fail" );
}
catch (FdoException* e ) {
#ifdef _WIN32
#ifdef _DEBUG
FdoStringP expectedMessage = L" Error creating spatial context California2, coordinate system catalog does not contain entry for WKT 'PROJCS[\"CA-I\",GEOGCS[\"LL27\",DATUM[\"NAD27\",SPHEROID[\"CLRK66\",60.400,294.97869821]],PRIMEM[\"Greenwich\",0],UNIT[\"Degree\",0.017453292519943295]],PROJECTION[\"Lambert_Conformal_Conic_2SP\"],PARAMETER[\"false_easting\",2000000.000],PARAMETER[\"false_northing\",0.000],PARAMETER[\"central_meridian\",-122.00000000000000],PARAMETER[\"latitude_of_origin\",39.33333333333333],PARAMETER[\"standard_parallel_1\",41.66666666666666],PARAMETER[\"standard_parallel_2\",40.00000000000000],UNIT[\"Foot_US\",0.30480060960122]]' ";
FdoString* pMessage = wcschr( e->GetExceptionMessage(), ')' );
if (pMessage) pMessage++;
#else
FdoStringP expectedMessage = L"Error creating spatial context California2, coordinate system catalog does not contain entry for WKT 'PROJCS[\"CA-I\",GEOGCS[\"LL27\",DATUM[\"NAD27\",SPHEROID[\"CLRK66\",60.400,294.97869821]],PRIMEM[\"Greenwich\",0],UNIT[\"Degree\",0.017453292519943295]],PROJECTION[\"Lambert_Conformal_Conic_2SP\"],PARAMETER[\"false_easting\",2000000.000],PARAMETER[\"false_northing\",0.000],PARAMETER[\"central_meridian\",-122.00000000000000],PARAMETER[\"latitude_of_origin\",39.33333333333333],PARAMETER[\"standard_parallel_1\",41.66666666666666],PARAMETER[\"standard_parallel_2\",40.00000000000000],UNIT[\"Foot_US\",0.30480060960122]]' ";
FdoString* pMessage = e->GetExceptionMessage();
#endif
CPPUNIT_ASSERT( pMessage && expectedMessage.ICompare(pMessage) == 0 );
#endif
FDO_SAFE_RELEASE(e);
}
}
else {
UnitTestUtil::CreateSpatialContext( connection, L"Nowhere", L"JunkCS", 0, 0, 10, 10 );
UnitTestUtil::CreateSpatialContext( connection, L"California2", L"CA_I", 0, 0, 10, 10, L"PROJCS[\"CA-I\",GEOGCS[\"LL27\",DATUM[\"NAD27\",SPHEROID[\"CLRK66\",60.400,294.97869821]],PRIMEM[\"Greenwich\",0],UNIT[\"Degree\",0.017453292519943295]],PROJECTION[\"Lambert_Conformal_Conic_2SP\"],PARAMETER[\"false_easting\",2000000.000],PARAMETER[\"false_northing\",0.000],PARAMETER[\"central_meridian\",-122.00000000000000],PARAMETER[\"latitude_of_origin\",39.33333333333333],PARAMETER[\"standard_parallel_1\",41.66666666666666],PARAMETER[\"standard_parallel_2\",40.00000000000000],UNIT[\"Foot_US\",0.30480060960122]]" );
stream1 = FdoIoMemoryStream::Create();
UnitTestUtil::ExportDb(
connection,
stream1,
flags,
false,
FdoStringP(L"Fdo") + datastore,
L"AutoGen",
true
);
UnitTestUtil::Config2SortedFile( stream1, UnitTestUtil::GetOutputFileName( GenFileName(3, hasMetaSchema, false) ) );
UnitTestUtil::CheckOutput(
GenFileName( 3, hasMetaSchema, true ),
UnitTestUtil::GetOutputFileName( GenFileName(3, hasMetaSchema, false) )
);
}
delete staticConn;
connection->Close();
}
catch ( ... )
{
try {
if ( staticConn ) delete staticConn;
if ( connection ) connection->Close();
}
catch ( ... ) {
}
throw;
}
}
/* Test basic update operation. */
void BasicUpdateTests::simple_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
// insert a feature
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5108.8 5104.7, 5109 5104, 5109 5105, 5108.8 5104.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (Data[0]->mPropertyName);
//FdoPtr<FdoStringValue> _string = static_cast<FdoStringValue*>(value->GetValue ());
//_string->SetNull ();
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (Data[0]->mPropertyName)));
// check geometry was not affected
FdoPtr<FdoGeometryValue> geometry = (FdoGeometryValue*)FDO_SAFE_ADDREF(expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* geometryText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
FdoString* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(geometryText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test insert/update/select on a table that has a UUID column. */
void BasicUpdateTests::update_uuid ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassUuid(), ArcSDETestConfig::ClassNameTestClassUuid(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Added");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"MYSTRING"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
expression->SetString(L"Updated");
reader = insert->Execute ();
expression->SetString(L"Deleted");
reader = insert->Execute ();
FdoStringP addedUuid1;
FdoStringP updatedUuid1;
FdoStringP deletedUuid;
FdoStringP updatedUuid2 = L"{ABCDEFGH-IJKL-MNOP-QRST-UVWXYZ123456}";
FdoStringP addedUuid3;
FdoStringP updatedUuid3;
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Deleted" )
deletedUuid = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoStringP filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) updatedUuid1 );
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"ID"));
expression = FdoStringValue::Create (updatedUuid2);
value->SetValue (expression);
values->Add (value);
bool updateFailed = false;
// ID is readonly so update should fail.
try
{
update->Execute ();
}
catch ( FdoException* ex )
{
ex->Release();
updateFailed = true;
}
CPPUNIT_ASSERT ("update failed");
FdoPtr<FdoIDelete> dlte = (FdoIDelete*)mConnection->CreateCommand (FdoCommandType_Delete);
dlte->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) deletedUuid );
dlte->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
if (1 != dlte->Execute ())
CPPUNIT_FAIL ("delete execute failed");
// check by doing a select
select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
int count = 0;
while (reader->ReadNext ())
{
count++;
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
CPPUNIT_ASSERT( count == 2 );
CPPUNIT_ASSERT( addedUuid3 == addedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 == updatedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 != updatedUuid2 );
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test spatial filter. */
void BasicUpdateTests::spatial_filter ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5010.4 5011.7, 5010.4 5011.3, 5010.282 5011.717))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id1;
while (reader->ReadNext ())
id1 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5000.5 5000.2, 5000.5 5000.7, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5015.018, 5014.3 5015.9, 5014.9 5015.9, 5014.262 5015.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// do a spatial filtered update
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (L"SHAPE INTERSECTS GEOMFROMTEXT ('POLYGON XY (( 5012 5012, 5020 5012, 5020 5016, 5012 5016, 5012 5012 ))')")));
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Alice in Wonderland'");
value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = select->Execute ();
int id;
while (reader->ReadNext ())
{
id = reader->GetInt32 ((FdoString*)GetIdPropName());
FdoString* item = reader->GetString (Data[0]->mPropertyName);
if (id == id3)
CPPUNIT_ASSERT_MESSAGE ("value not changed", 0 == wcscmp (item, L"Alice in Wonderland"));
else
CPPUNIT_ASSERT_MESSAGE ("value mistakenly changed", 0 != wcscmp (item, L"Alice in Wonderland"));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test geometry update operation. */
void BasicUpdateTests::geometry_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5011 5012, 5013 5012, 5010.282 5011.717))')");
FdoPtr<FdoPropertyValue> geometry = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (geometry);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5005 5000, 5005 5005, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5000.018, 5015 5005, 5016 5010, 5014.262 5000.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
FdoPtr<FdoFilter> fdoFilter = FdoFilter::Parse (filter);
update->SetFilter (fdoFilter);
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5008.8 5004.7, 5010 5010, 5000 5005, 5008.8 5004.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
fdoFilter = FdoFilter::Parse (filter);
select->SetFilter (fdoFilter);
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoPtr<FdoGeometryValue> geometry = FDO_SAFE_ADDREF((FdoGeometryValue*)expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* referenceText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
const wchar_t* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(referenceText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test all data types update operation. */
void BasicUpdateTests::full_update ()
{
int iRow = 0;
FdoPtr<FdoPropertyValueCollection> values;
FdoPtr<FdoISelect> selectCmd;
FdoPtr<FdoIFeatureReader> reader;
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
// Insert 2 rows of data:
while (iRow<=1)
{
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
values = insert->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create ();
value->SetName (Data[i]->mPropertyName);
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
value->SetValue (expression);
values->Add (value);
}
reader = insert->Execute ();
// none returned: reader->Close ();
iRow++;
}
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
FdoInt32 iSelectedRow = 0;
while (reader->ReadNext ())
{
// NOTE: we're assuming we receive the rows in the same order we inserted them
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iSelectedRow]);
iSelectedRow++;
}
reader->Close ();
// Update both rows, providing several values in the *reverse* order as class properties appear:
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wchar_t filter[1024];
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[0]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int iPropertyIndex = 0; iPropertyIndex < PropertyCount; iPropertyIndex++)
{
int iDataIndex = (PropertyCount - 1) - iPropertyIndex;
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[iDataIndex]->mPropertyData[iRow], Data[iDataIndex]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[iDataIndex]->mPropertyName, expression);
values->Add (value);
}
FdoInt32 iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
iRow++;
// Update both rows, providing *mostly NULL value* in the *same* order as class properties appear:
update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[iRow-1]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[i]->mPropertyName, expression);
value->SetValue (expression);
values->Add (value);
}
iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}