Пример #1
0
bool GLUIRealTimePlannerGUI::Initialize()
{
  if(!BaseT::Initialize()) return false;

  glui = GLUI_Master.create_glui_subwindow(main_window,GLUI_SUBWINDOW_RIGHT);
  glui->set_main_gfx_window(main_window);
  AddControl(glui->add_button("New target"),"new_target");
  AddControl(glui->add_checkbox("Draw desired"),"draw_desired");
  AddControl(glui->add_checkbox("Draw commanded"),"draw_desired");
  AddControl(glui->add_checkbox("Draw UI"),"draw_ui");
  AddControl(glui->add_checkbox("Draw path"),"draw_path");
  AddControl(glui->add_checkbox("Draw contacts"),"draw_contacts");
  GLUI_Spinner* spinner = glui->add_spinner("Collision margin",GLUI_SPINNER_FLOAT);
  spinner->set_float_limits(0.0,1.0);
  AddControl(spinner,"collision_margin");

  AnyCollection c;
  bool res=c.read("{type:button_press,button:new_target}");
  Assert(res == true);
  AddCommandRule(c,"new_target","");
  res=c.read("{type:widget_value,widget:collision_margin,value:_1}");
  Assert(res == true);
  AddCommandRule(c,"set_collision_margin","_1");
  
  printf("Done initializing...\n");
  return true;
}
Пример #2
0
//! This function creates all the GLUI gui elements
void create_glui_ui(void)
{
  GLUI *glui = GLUI_Master.create_glui_subwindow( main_window, GLUI_SUBWINDOW_RIGHT );
  glui->add_statictext("Group 11 Simulation"); 
  new GLUI_Separator(glui);
  glui->add_statictext("Simulation Timesteps"); 
  GLUI_Spinner* velocityIterationSpinner =
    glui->add_spinner("Velocity Iterations", GLUI_SPINNER_INT, &settings.velocity_iterations);
  velocityIterationSpinner->set_int_limits(1, 500);
  
  GLUI_Spinner* positionIterationSpinner =
    glui->add_spinner("Position Iterations", GLUI_SPINNER_INT, &settings.position_iterations);
  positionIterationSpinner->set_int_limits(0, 100);
  
  GLUI_Spinner* hertzSpinner =
    glui->add_spinner("Sim steps per frame", GLUI_SPINNER_FLOAT, &settings.hz);
  hertzSpinner->set_float_limits(5.0f, 200.0f);


  new GLUI_Separator(glui);
  //new GLUI_Column( glui, false );
  glui->add_statictext("Simulation Parameters"); 
  glui->add_checkbox("Warm Starting", &settings.enable_warm_starting);
  glui->add_checkbox("Time of Impact", &settings.enable_continuous);
  glui->add_checkbox("Sub-Stepping", &settings.enable_sub_stepping);


  
  //new GLUI_Column( glui, false );
  new GLUI_Separator(glui);
  glui->add_statictext("Display Options"); 
  GLUI_Panel* drawPanel =	glui->add_panel("Draw");
  glui->add_checkbox_to_panel(drawPanel, "Shapes", &settings.draw_shapes);
  glui->add_checkbox_to_panel(drawPanel, "Joints", &settings.draw_joints);
  glui->add_checkbox_to_panel(drawPanel, "AABBs", &settings.draw_AABBs);
  glui->add_checkbox_to_panel(drawPanel, "Statistics", &settings.draw_stats);
  glui->add_checkbox_to_panel(drawPanel, "Profile", &settings.draw_profile);
  
  //new GLUI_Column( glui, false );
  new GLUI_Separator(glui);
  glui->add_button("Pause", 0, callbacks_t::pause_cb);
  glui->add_button("Single Step", 0, callbacks_t::single_step_cb);
  glui->add_button("Restart", 0, callbacks_t::restart_cb);
  glui->add_button("Quit", 0,(GLUI_Update_CB)callbacks_t::exit_cb);
  glui->set_main_gfx_window( main_window );

  new GLUI_Separator(glui);
  glui->add_statictext("Mayank Meghwanshi"); 
  glui->add_statictext("Divyam Bansal"); 
  glui->add_statictext("Jaswant Kumar"); 

}
Пример #3
0
int main(int argc, char* argv[])
{
  /****************************************/
  /*   Initialize GLUT and create window  */
  /****************************************/

  glutInit(&argc, argv);
  glutInitDisplayMode( GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH );
  glutInitWindowPosition( 50, 50 );
  glutInitWindowSize( 300, 300 );
 
  main_window = glutCreateWindow( "GLUI Example 1" );
  glutDisplayFunc( myGlutDisplay );
  glutReshapeFunc( myGlutReshape );  

  /****************************************/
  /*       Set up OpenGL lights           */
  /****************************************/

  GLfloat light0_ambient[] =  {0.1f, 0.1f, 0.3f, 1.0f};
  GLfloat light0_diffuse[] =  {.6f, .6f, 1.0f, 1.0f};
  GLfloat light0_position[] = {1.0f, 1.0f, 1.0f, 0.0f};

  glEnable(GL_LIGHTING);
  glEnable(GL_LIGHT0);
  glLightfv(GL_LIGHT0, GL_AMBIENT, light0_ambient);
  glLightfv(GL_LIGHT0, GL_DIFFUSE, light0_diffuse);
  glLightfv(GL_LIGHT0, GL_POSITION, light0_position);

  /****************************************/
  /*          Enable z-buferring          */
  /****************************************/

  glEnable(GL_DEPTH_TEST);


  /****************************************/
  /*         Here's the GLUI code         */
  /****************************************/
  
  GLUI *glui = GLUI_Master.create_glui( "GLUI" );
  glui->add_checkbox( "Wireframe", &wireframe );
  GLUI_Spinner *segment_spinner = 
    glui->add_spinner( "Segments:", GLUI_SPINNER_INT, &segments );
  segment_spinner->set_int_limits( 3, 60 ); 
   
  glui->set_main_gfx_window( main_window );

  /* We register the idle callback with GLUI, *not* with GLUT */
  GLUI_Master.set_glutIdleFunc( myGlutIdle ); 

  glutMainLoop();
}
Пример #4
0
int main(int argc, char* argv[])
{
	atexit(onExit);

	/****************************************/
	/*   Initialize GLUT and create window  */
	/****************************************/

	glutInit(&argc, argv);
	glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE);
	glutInitWindowPosition(50, 50);
	glutInitWindowSize(500, 500);

	main_window = glutCreateWindow("COMP 175 Assignment 4");
	glutDisplayFunc(myGlutDisplay);
	glutReshapeFunc(myGlutReshape);

	/****************************************/
	/*         Here's the GLUI code         */
	/****************************************/

	GLUI* glui = GLUI_Master.create_glui("GLUI");

	filenameTextField = new GLUI_EditText( glui, "Filename:", filenamePath);
	filenameTextField->set_w(300);
	glui->add_button("Load", 0, callback_load);
	glui->add_button("Start!", 0, callback_start);
	glui->add_checkbox("Isect Only", &isectOnly);
	
	GLUI_Panel *camera_panel = glui->add_panel("Camera");
	(new GLUI_Spinner(camera_panel, "RotateV:", &camRotV))
		->set_int_limits(-179, 179);
	(new GLUI_Spinner(camera_panel, "RotateU:", &camRotU))
		->set_int_limits(-179, 179);
	(new GLUI_Spinner(camera_panel, "RotateW:", &camRotW))
		->set_int_limits(-179, 179);
	(new GLUI_Spinner(camera_panel, "Angle:", &viewAngle))
		->set_int_limits(1, 179);

	glui->add_column_to_panel(camera_panel, true);

	GLUI_Spinner* eyex_widget = glui->add_spinner_to_panel(camera_panel, "EyeX:", GLUI_SPINNER_FLOAT, &eyeX);
	eyex_widget->set_float_limits(-10, 10);
	GLUI_Spinner* eyey_widget = glui->add_spinner_to_panel(camera_panel, "EyeY:", GLUI_SPINNER_FLOAT, &eyeY);
	eyey_widget->set_float_limits(-10, 10);
	GLUI_Spinner* eyez_widget = glui->add_spinner_to_panel(camera_panel, "EyeZ:", GLUI_SPINNER_FLOAT, &eyeZ);
	eyez_widget->set_float_limits(-10, 10);

	GLUI_Spinner* lookx_widget = glui->add_spinner_to_panel(camera_panel, "LookX:", GLUI_SPINNER_FLOAT, &lookX);
	lookx_widget->set_float_limits(-10, 10);
	GLUI_Spinner* looky_widget = glui->add_spinner_to_panel(camera_panel, "LookY:", GLUI_SPINNER_FLOAT, &lookY);
	looky_widget->set_float_limits(-10, 10);
	GLUI_Spinner* lookz_widget = glui->add_spinner_to_panel(camera_panel, "LookZ:", GLUI_SPINNER_FLOAT, &lookZ);
	lookz_widget->set_float_limits(-10, 10);

	glui->add_button("Quit", 0, (GLUI_Update_CB)exit);

	glui->set_main_gfx_window(main_window);

	/* We register the idle callback with GLUI, *not* with GLUT */
	GLUI_Master.set_glutIdleFunc(myGlutIdle);

	glutMainLoop();

	return EXIT_SUCCESS;
}
Пример #5
0
  virtual bool Initialize()
  {
    cur_link=0;
    cur_driver=0;
    link_value = 0;
    driver_value = 0;
    draw_geom = 1;
    draw_bbs = 0;
    draw_com = 0;
    draw_frame = 0;
    draw_expanded = 0;
    draw_self_collision_tests = 0;
    hoverLink=hoverWidget=-1;
    hoverPt.setZero();
    pose_ik = 0;
    if(!RobotViewProgram::Initialize()) return false;
    self_colliding.resize(robot->links.size(),false);   
    UpdateConfig();

    /*
    //TEST: robot-to-robot IK test.  only works for AL5Dx2
    IKGoal test;
    test.link = 8;
    test.destLink = 16;
    test.localPosition.set(0,0,0.05);
    test.endPosition.set(0,0,0.05);
    //test.SetFixedPosition(test.endPosition);
    Matrix3 R;
    R.setRotateZ(120);
    test.SetFixedRotation(R);

    vector<IKGoal> problem(1,test);
    int iters=100;
    bool res=SolveIK(*robot,problem,1e-3,iters);
    printf("Solved IK: %d, %d iters, error %g\n",(int)res,iters,RobotIKError(*robot,test));
    UpdateConfig();
    */

    //setup GUI 
    glui = GLUI_Master.create_glui_subwindow(main_window,GLUI_SUBWINDOW_RIGHT);
    glui->set_main_gfx_window(main_window);
    GLUI_Panel* panel = glui->add_panel("Link controls");
    link_spinner = glui->add_spinner_to_panel(panel,"Index",GLUI_SPINNER_INT,&cur_link,LINK_SPINNER_ID,ControlFunc);
    link_spinner->set_int_limits(0,robot->links.size()-1,GLUI_LIMIT_WRAP);

    link_listbox = glui->add_listbox_to_panel(panel,"Name",&cur_link,LINK_LISTBOX_ID,ControlFunc);
    for(size_t i=0;i<robot->links.size();i++) {
      char buf[256];
      strcpy(buf,robot->linkNames[i].c_str());
      link_listbox->add_item(i,buf);
    }

    link_value_spinner = glui->add_spinner_to_panel(panel,"Angle",GLUI_SPINNER_FLOAT,&link_value,LINK_VALUE_SPINNER_ID,ControlFunc);
    link_info = glui->add_statictext_to_panel(panel,"Info");
    UpdateLinkValueGUI();
    UpdateLinkInfoGUI();

    panel = glui->add_panel("Driver controls");
    glui->add_checkbox_to_panel(panel,"Pose by IK",&pose_ik);
    driver_spinner = glui->add_spinner_to_panel(panel,"Index",GLUI_SPINNER_INT,&cur_driver,DRIVER_SPINNER_ID,ControlFunc);
    driver_spinner->set_int_limits(0,(int)robot->drivers.size()-1,GLUI_LIMIT_WRAP);

    driver_listbox = glui->add_listbox_to_panel(panel,"Name",&cur_driver,DRIVER_LISTBOX_ID,ControlFunc);
    for(size_t i=0;i<robot->drivers.size();i++) {
      char buf[256];
      strcpy(buf,robot->driverNames[i].c_str());
      driver_listbox->add_item(i,buf);
    }

    driver_value_spinner = glui->add_spinner_to_panel(panel,"Angle",GLUI_SPINNER_FLOAT,&driver_value,DRIVER_VALUE_SPINNER_ID,ControlFunc);
    driver_info = glui->add_statictext_to_panel(panel,"Info");

    glui->add_checkbox("Draw geometry",&draw_geom);
    glui->add_checkbox("Draw COM",&draw_com);
    glui->add_checkbox("Draw frame",&draw_frame);
    glui->add_checkbox("Draw bboxes",&draw_bbs);
    glui->add_checkbox("Draw expanded",&draw_expanded,DRAW_EXPANDED_CHECKBOX_ID,ControlFunc);
    glui->add_checkbox("Draw collision tests",&draw_self_collision_tests);
    UpdateDriverValueGUI();
    UpdateDriverInfoGUI();
    return true;
  }