Python CPocket::AppendTextToProgram()
{
Python python;
CTool *pTool = CTool::Find( m_tool_number );
if (pTool == NULL)
{
wxMessageBox(_T("Cannot generate GCode for pocket without a tool assigned"));
return python;
} // End if - then
python << CSketchOp::AppendTextToProgram();
HeeksObj* object = wxGetApp().GetIDObject(SketchType, m_sketch);
if(object == NULL) {
wxMessageBox(wxString::Format(_("Pocket operation - Sketch doesn't exist")));
return python;
}
int type = object->GetType();
// do areas and circles first, separately
{
switch(type)
{
case CircleType:
case AreaType:
{
wxGetApp().ObjectAreaString(object, python);
WritePocketPython(python);
}
break;
}
}
if(type == SketchType)
{
python << _T("a = area.Area()\n");
python << _T("entry_moves = []\n");
if (object->GetNumChildren() == 0){
wxMessageBox(wxString::Format(_("Pocket operation - Sketch %d has no children"), object->GetID()));
return python;
}
HeeksObj* re_ordered_sketch = NULL;
SketchOrderType order = ((CSketch*)object)->GetSketchOrder();
if( (order != SketchOrderTypeCloseCW) &&
(order != SketchOrderTypeCloseCCW) &&
(order != SketchOrderTypeMultipleCurves) &&
(order != SketchOrderHasCircles))
{
re_ordered_sketch = object->MakeACopy();
((CSketch*)re_ordered_sketch)->ReOrderSketch(SketchOrderTypeReOrder);
object = re_ordered_sketch;
order = ((CSketch*)object)->GetSketchOrder();
if( (order != SketchOrderTypeCloseCW) &&
(order != SketchOrderTypeCloseCCW) &&
(order != SketchOrderTypeMultipleCurves) &&
(order != SketchOrderHasCircles))
{
switch (((CSketch*)object)->GetSketchOrder())
{
case SketchOrderTypeOpen:
{
wxMessageBox(wxString::Format(_("Pocket operation - Sketch must be a closed shape - sketch %d"), object->m_id));
delete re_ordered_sketch;
return python;
}
break;
default:
{
wxMessageBox(wxString::Format(_("Pocket operation - Badly ordered sketch - sketch %d"), object->m_id));
delete re_ordered_sketch;
return python;
}
break;
}
}
}
if(object)
{
python << WriteSketchDefn(object);
}
if(re_ordered_sketch)
{
delete re_ordered_sketch;
}
} // End for
// reorder the area, the outside curves must be made anti-clockwise and the insides clockwise
python << _T("a.Reorder()\n");
WritePocketPython(python);
return python;
}
Python CProfile::AppendTextToProgram(CMachineState *pMachineState, bool finishing_pass)
{
Python python;
CTool *pTool = CTool::Find( m_tool_number );
if (pTool == NULL)
{
if(!finishing_pass)wxMessageBox(_T("Cannot generate GCode for profile without a tool assigned"));
return(python);
} // End if - then
if(!finishing_pass || m_profile_params.m_only_finishing_pass)
{
python << CDepthOp::AppendTextToProgram(pMachineState);
if(m_profile_params.m_auto_roll_on || m_profile_params.m_auto_roll_off)
{
python << _T("roll_radius = float(");
python << m_profile_params.m_auto_roll_radius / theApp.m_program->m_units;
python << _T(")\n");
}
}
if(finishing_pass)
{
python << _T("feedrate_hv(") << m_profile_params.m_finishing_h_feed_rate / theApp.m_program->m_units << _T(", ");
python << m_speed_op_params.m_vertical_feed_rate / theApp.m_program->m_units << _T(")\n");
python << _T("flush_nc()\n");
python << _T("offset_extra = 0.0\n");
python << _T("step_down = ") << m_profile_params.m_finishing_step_down << _T("\n");
}
else
{
python << _T("offset_extra = ") << m_profile_params.m_offset_extra / theApp.m_program->m_units << _T("\n");
}
CProfileParams::eCutMode cut_mode = finishing_pass ? m_profile_params.m_finishing_cut_mode : m_profile_params.m_cut_mode;
#ifdef OP_SKETCHES_AS_CHILDREN
for(std::list<HeeksObj*>::iterator It = m_objects.begin(); It != m_objects.end(); It++)
{
// write a kurve definition
HeeksObj* object = *It;
if((object == NULL) || (object->GetType() != SketchType) || (object->GetNumChildren() == 0))continue;
#else
for (std::list<int>::iterator It = m_sketches.begin(); It != m_sketches.end(); It++)
{
HeeksObj* object = heeksCAD->GetIDObject(SketchType, *It);
if((object == NULL) || (object->GetNumChildren() == 0))continue;
#endif
HeeksObj* re_ordered_sketch = NULL;
SketchOrderType sketch_order = heeksCAD->GetSketchOrder(object);
if(sketch_order == SketchOrderTypeBad)
{
re_ordered_sketch = object->MakeACopy();
heeksCAD->ReOrderSketch(re_ordered_sketch, SketchOrderTypeReOrder);
object = re_ordered_sketch;
}
if(sketch_order == SketchOrderTypeMultipleCurves || sketch_order == SketchOrderHasCircles)
{
std::list<HeeksObj*> new_separate_sketches;
heeksCAD->ExtractSeparateSketches(object, new_separate_sketches, false);
for(std::list<HeeksObj*>::iterator It = new_separate_sketches.begin(); It != new_separate_sketches.end(); It++)
{
HeeksObj* one_curve_sketch = *It;
python << AppendTextForOneSketch(one_curve_sketch, pMachineState, cut_mode).c_str();
delete one_curve_sketch;
}
}
else
{
python << AppendTextForOneSketch(object, pMachineState, cut_mode).c_str();
}
if(re_ordered_sketch)
{
delete re_ordered_sketch;
}
}
return python;
} // End AppendTextToProgram() method
static unsigned char cross16[32] = {0x80, 0x01, 0x40, 0x02, 0x20, 0x04, 0x10, 0x08, 0x08, 0x10, 0x04, 0x20, 0x02, 0x40, 0x01, 0x80, 0x01, 0x80, 0x02, 0x40, 0x04, 0x20, 0x08, 0x10, 0x10, 0x08, 0x20, 0x04, 0x40, 0x02, 0x80, 0x01};
void CProfile::glCommands(bool select, bool marked, bool no_color)
{
CDepthOp::glCommands(select, marked, no_color);
if(marked && !no_color)
{
if(GetNumSketches() == 1)
{
// draw roll on point
if(!m_profile_params.m_auto_roll_on)
{
glColor3ub(0, 200, 200);
glRasterPos3dv(m_profile_params.m_roll_on_point);
glBitmap(16, 16, 8, 8, 10.0, 0.0, cross16);
}
// draw roll off point
if(!m_profile_params.m_auto_roll_on)
{
glColor3ub(255, 128, 0);
glRasterPos3dv(m_profile_params.m_roll_off_point);
glBitmap(16, 16, 8, 8, 10.0, 0.0, cross16);
}
// draw start point
if(m_profile_params.m_start_given)
{
glColor3ub(128, 0, 255);
glRasterPos3dv(m_profile_params.m_start);
glBitmap(16, 16, 8, 8, 10.0, 0.0, cross16);
}
// draw end point
if(m_profile_params.m_end_given)
{
glColor3ub(200, 200, 0);
glRasterPos3dv(m_profile_params.m_end);
glBitmap(16, 16, 8, 8, 10.0, 0.0, cross16);
}
}
}
}