bool CClientFXDB::LoadFxGroups(ILTClient* pClient, const char *sFileName )
{
ILTStream *pFxFile;
// Attempt to open the client fx file
pClient->OpenFile(sFileName, &pFxFile);
if(!pFxFile)
return false;
char szTag[MAX_TAG_SIZE] = {0};
//remember where we are in our list of effects, so that we don't reinitalize keys that are already
//in the list
CLinkListNode<FX_GROUP *> *pTailNode = m_collGroupFX.GetTail();
// Figure out if we are reading a binary file or text...
pFxFile->Read( szTag, 7 );
pFxFile->SeekTo( 0 );
// This is a text file if we can read an asci "Groups:".
bool bText = !_stricmp( szTag, "Groups:" );
ReadFXGroups( bText, pFxFile, m_collGroupFX );
//clean up the file
pFxFile->Release();
pFxFile = NULL;
// Run through the FX groups we added to the end of the list and setup any non-instance specific
// information
CLinkListNode<FX_GROUP *> *pFxGroupNode = (pTailNode) ? pTailNode : m_collGroupFX.GetHead();
while (pFxGroupNode)
{
uint32 nNumKeys = pFxGroupNode->m_Data->m_nNumKeys;
for(uint32 nCurrKey = 0; nCurrKey < nNumKeys; nCurrKey++)
{
FX_KEY *pKey = &pFxGroupNode->m_Data->m_pKeys[nCurrKey];
float tmLength = pKey->m_tmEnd - pKey->m_tmStart;
if (tmLength >= pFxGroupNode->m_Data->m_tmTotalTime - 0.01f)
{
pKey->m_bContinualLoop = true;
}
else
{
pKey->m_bContinualLoop = false;
}
}
pFxGroupNode = pFxGroupNode->m_pNext;
}
// Success !!
return true;
}
LTBOOL CScreenSpriteMgr::CacheSprite(CScreenSprite * pSprite, char * pFile)
{
ILTStream * pStream;
char buf[1024];
pSprite->m_pName = strdup(pFile);
g_pLTClient->OpenFile(pFile, &pStream);
if (pStream)
{
int nFrames;
int nFrameRate;
int bTransparency;
int bTranslucency;
int iChromakey;
pStream->Read(&nFrames, 4);
pSprite->m_nFrames = nFrames;
pStream->Read(&nFrameRate, 4);
pSprite->m_nFrameRate = nFrameRate;
pSprite->m_fOneFrameTime = 1.0f / (float)nFrameRate;
pStream->Read(&bTransparency, 4);
pStream->Read(&bTranslucency, 4);
pStream->Read(&iChromakey, 4);
if (nFrames < 1 && nFrames > 64)
{
// We have an error.
// FIXME report it
pStream->Release();
return LTFALSE;
}
for (int i = 0; i < nFrames; i++)
{
short iLen;
pStream->Read(&iLen, 2);
if (iLen < 1 || iLen > 1023)
{
// We have an error.
// FIXME report it
pStream->Release();
return LTFALSE;
}
memset(buf,0,1024);
pStream->Read(&buf, iLen);
int iFrameID = CacheTexture(buf);
pSprite->m_FrameArray.push_back(m_FrameArray[iFrameID]);
}
pStream->Release();
return LTTRUE;
}
return (LTFALSE);
}
bool CD3DSkelMesh::Load_MP(ILTStream& File)
{
// Read in out Min/Max Bones (effecting this guy)...
File.Read(&m_iMinBone,sizeof(m_iMinBone));
File.Read(&m_iMaxBone,sizeof(m_iMaxBone));
// What type of Vert do we need?
switch (m_iMaxBonesPerVert)
{
case 2 : m_VertType = eINDEXED_B1; break;
case 3 : m_VertType = eINDEXED_B2; break;
case 4 : m_VertType = eINDEXED_B3; break;
default : assert(0); return false;
}
// If we are using re-indexed bones, read them in...
if (m_bReIndexedBones)
{
uint32 iBoneCount = 0;
File.Read(&iBoneCount,sizeof(iBoneCount));
assert(iBoneCount < 10000 && "Crazy bone count, checked your packed model format.");
LT_MEM_TRACK_ALLOC(m_pReIndexedBoneList = new uint32[iBoneCount],LT_MEM_TYPE_RENDERER);
File.Read(m_pReIndexedBoneList,sizeof(uint32)*iBoneCount);
}
// Read in our Verts...
for (uint32 i=0;i<4;++i)
{
if (!m_VertStreamFlags[i])
continue;
uint32 iVertexSize = 0; // Figure out the vertex size...
uint32 iVertFlags = 0;
uint32 iUVSets = 0;
GetVertexFlags_and_Size(m_VertType,m_VertStreamFlags[i],iVertFlags,iVertexSize,iUVSets,m_bNonFixPipeData);
uint32 iSize = iVertexSize * m_iVertCount; // Alloc the VertData...
LT_MEM_TRACK_ALLOC(m_pVertData[i] = new uint8[iSize],LT_MEM_TYPE_RENDERER);
File.Read(m_pVertData[i],iSize);
}
// Read in pIndexList...
LT_MEM_TRACK_ALLOC(m_pIndexData = new uint8[sizeof(uint16) * m_iPolyCount * 3],LT_MEM_TYPE_RENDERER);
File.Read(m_pIndexData,sizeof(uint16) * m_iPolyCount * 3);
// Create the VBs and stuff...
ReCreateObject();
return true;
}
// Load a render style (ltb file) and create a render object for it...
CRenderStyle* D3DRenderStyles::LoadRenderStyle(const char* szFilename)
{
FileRef ref;
CD3DRenderStyle* pRenderStyle = NULL;
ref.m_FileType = TYPECODE_RSTYLE;
ref.m_pFilename = szFilename;
FileIdentifier* pIdent = client_file_mgr->GetFileIdentifier(&ref, TYPECODE_RSTYLE);
if (pIdent)
{
if (pIdent->m_pData) {
// Is it already loaded?
pRenderStyle = (CD3DRenderStyle*)pIdent->m_pData;
pRenderStyle->IncRefCount();
}
else
{
ILTStream* pFileStream = client_file_mgr->OpenFile(&ref);
if (pFileStream)
{ // Create and Load it...
pRenderStyle = g_Device.CreateRenderStyle();
if (!pRenderStyle) return NULL;
if (!pRenderStyle->Load_LTBData(pFileStream))
{
g_Device.DestroyRenderStyle(pRenderStyle);
pFileStream->Release();
string szTmp = "Couldn't Load Renderstyle ";
szTmp += szFilename; szTmp += "\n";
OutputDebugString(szTmp.c_str());
return false;
}
// We're keeping a pointer to it in the m_pData member, so inc it's ref count.
// This means that all loaded render styles wont be freed until all files are flushed.
pIdent->m_pData = pRenderStyle;
pRenderStyle->IncRefCount();
pRenderStyle->SetFilename( szFilename ) ;
pFileStream->Release();
}
}
}
return pRenderStyle;
}
bool CD3DSkelMesh::Load_RD(ILTStream& File)
{
// What type of Vert do we need?
switch (m_iMaxBonesPerTri)
{
case 1 : m_VertType = eNO_WORLD_BLENDS; break;
case 2 : m_VertType = eNONINDEXED_B1; break;
case 3 : m_VertType = eNONINDEXED_B2; break;
case 4 : m_VertType = eNONINDEXED_B3; break;
default : assert(0); return false;
}
// Read in our Verts...
for (uint32 i=0;i<4;++i)
{
if (!m_VertStreamFlags[i]) continue;
uint32 iVertexSize = 0; // Figure out the vertex size...
uint32 iVertFlags = 0;
uint32 iUVSets = 0;
GetVertexFlags_and_Size(m_VertType,m_VertStreamFlags[i],iVertFlags,iVertexSize,iUVSets,m_bNonFixPipeData);
uint32 iSize = iVertexSize * m_iVertCount; // Alloc the VertData...
LT_MEM_TRACK_ALLOC(m_pVertData[i] = new uint8[iSize],LT_MEM_TYPE_RENDERER);
File.Read(m_pVertData[i],iSize);
}
// Read in pIndexList...
LT_MEM_TRACK_ALLOC(m_pIndexData = new uint8[sizeof(uint16) * m_iPolyCount * 3],LT_MEM_TYPE_RENDERER);
File.Read(m_pIndexData,sizeof(uint16) * m_iPolyCount * 3);
// Allocate and read in the BoneSets...
File.Read(&m_iBoneSetCount,sizeof(m_iBoneSetCount));
LT_MEM_TRACK_ALLOC(m_pBoneSetArray = new BoneSetListItem[m_iBoneSetCount],LT_MEM_TYPE_RENDERER);
if (!m_pBoneSetArray)
return false;
File.Read(m_pBoneSetArray,sizeof(BoneSetListItem)*m_iBoneSetCount);
// Create the VBs and stuff...
ReCreateObject();
return true;
}
LTRESULT CLTRenderMgr::AddEffectShader (const char *pFileName,
int EffectShaderID,
const uint32 *pVertexElements,
uint32 VertexElementsSize,
HEFFECTPOOL EffectPoolID)
{
if (!pFileName)
{
RETURN_ERROR(1, CLTRenderMgr::AddEffectShader, LT_INVALIDPARAMS);
}
FileRef ref;
ref.m_FileType = FILE_ANYFILE;
ref.m_pFilename = pFileName;
ILTStream *pStream = client_file_mgr->OpenFile(&ref);
if (!pStream)
{
RETURN_ERROR(3, CLTRenderMgr::AddEffectShader, LT_NOTFOUND);
}
if(!LTEffectShaderMgr::GetSingleton().AddEffectShader(pStream, pFileName, EffectShaderID, pVertexElements, VertexElementsSize, EffectPoolID))
{
// Close the file.
if (pStream != NULL)
{
pStream->Release();
pStream = NULL;
}
return LT_ERROR;
}
// Close the file.
if (pStream != NULL)
{
pStream->Release();
pStream = NULL;
}
return LT_OK;
}
// ----------------------------------------------------------------------- //
//
// ROUTINE: CTO2MissionButeMgr::Init
//
// PURPOSE: Initialization
//
// ----------------------------------------------------------------------- //
LTBOOL CDMButeMgr::Init(const char* szAttributeFile)
{
if(!szAttributeFile) return LTFALSE;
// See if we already have this attribute file loaded.
if( m_strAttributeFile.GetLength( ) && m_strAttributeFile.CompareNoCase( szAttributeFile ) == 0 )
return LTTRUE;
// Start fresh.
Term( );
ILTStream* pDStream = LTNULL;
LTRESULT dr = g_pLTBase->OpenFile(szAttributeFile, &pDStream);
bool bFound = (dr == LT_OK && pDStream);
if (pDStream)
pDStream->Release();
if (!bFound || !Parse(szAttributeFile))
return LTFALSE;
return LTTRUE;
};
bool CD3DSkelMesh::Load(ILTStream& File, LTB_Header& LTBHeader)
{
if (LTBHeader.m_iFileType != LTB_D3D_MODEL_FILE)
{
OutputDebugString("Error: Wrong file type in CD3DSkelMesh::Load\n");
return false;
}
if (LTBHeader.m_iVersion != CD3D_LTB_LOAD_VERSION)
{
OutputDebugString("Error: Wrong file version in CD3DSkelMesh::Load\n");
return false;
}
// Read in the basics...
uint32 iObjSize; File.Read(&iObjSize,sizeof(iObjSize));
File.Read(&m_iVertCount,sizeof(m_iVertCount));
File.Read(&m_iPolyCount,sizeof(m_iPolyCount));
File.Read(&m_iMaxBonesPerTri,sizeof(m_iMaxBonesPerTri));
File.Read(&m_iMaxBonesPerVert,sizeof(m_iMaxBonesPerVert));
File.Read(&m_bReIndexedBones,sizeof(m_bReIndexedBones));
File.Read(&m_VertStreamFlags[0],sizeof(uint32)*4);
// Are we using Matrix Palettes...
bool bUseMatrixPalettes;
File.Read(&bUseMatrixPalettes,sizeof(bUseMatrixPalettes));
if (bUseMatrixPalettes)
{
m_eRenderMethod = eD3DRenderMatrixPalettes;
return Load_MP(File);
}
else
{
m_eRenderMethod = eD3DRenderDirect;
return Load_RD(File);
}
}
bool CD3DVAMesh::Load(ILTStream& File, LTB_Header& LTBHeader)
{
if (LTBHeader.m_iFileType != LTB_D3D_MODEL_FILE)
{
OutputDebugString("Error: Wrong file type in CD3DSkelMesh::Load\n");
return false;
}
if (LTBHeader.m_iVersion != CD3D_LTB_LOAD_VERSION)
{
OutputDebugString("Error: Wrong file version in CD3DSkelMesh::Load\n");
return false;
}
// Read in the basics...
uint32 iObjSize; File.Read(&iObjSize,sizeof(iObjSize));
File.Read(&m_iVertCount,sizeof(m_iVertCount));
File.Read(&m_iUnDupVertCount,sizeof(m_iUnDupVertCount));
File.Read(&m_iPolyCount,sizeof(m_iPolyCount));
File.Read(&m_iMaxBonesPerTri,sizeof(m_iMaxBonesPerTri));
File.Read(&m_iMaxBonesPerVert,sizeof(m_iMaxBonesPerVert));
File.Read(&m_VertStreamFlags[0],sizeof(uint32)*4);
File.Read(&m_iAnimNodeIdx,sizeof(m_iAnimNodeIdx));
File.Read(&m_iBoneEffector,sizeof(m_iBoneEffector));
// Read in our Verts...
for (uint32 i=0;i<4;++i)
{
if (!m_VertStreamFlags[i]) continue;
uint32 iVertexSize = 0; // Figure out the vertex size...
uint32 iVertFlags = 0;
uint32 iUVSets = 0;
GetVertexFlags_and_Size(eNO_WORLD_BLENDS,m_VertStreamFlags[i],iVertFlags,iVertexSize,iUVSets,m_bNonFixPipeData);
uint32 iSize = iVertexSize * m_iVertCount; // Alloc the VertData...
LT_MEM_TRACK_ALLOC(m_pVertData[i] = new uint8[iSize],LT_MEM_TYPE_RENDERER);
File.Read(m_pVertData[i],iSize);
}
// Read in pIndexList...
LT_MEM_TRACK_ALLOC(m_pIndexData = new uint8[sizeof(uint16) * m_iPolyCount * 3],LT_MEM_TYPE_RENDERER);
File.Read(m_pIndexData,sizeof(uint16) * m_iPolyCount * 3);
// Read in m_pDupMapList...
File.Read(&m_iDupMapListCount,sizeof(m_iDupMapListCount)); assert(m_iDupMapListCount < 1000000 && "Invalid VA VertData");
LT_MEM_TRACK_ALLOC(m_pDupMapList = new DupMap[m_iDupMapListCount],LT_MEM_TYPE_RENDERER);
File.Read(m_pDupMapList,sizeof(DupMap) * m_iDupMapListCount);
// Create the VBs and stuff...
ReCreateObject();
return true;
}
void d3d_DrawPolyGrid(const ViewParams &Params, LTObject *pObj)
{
//the global pixel shader to be used for the water bumpmapping and a flag indicating if
//creation failed
bool s_bPixelShaderFailed = false;
//make sure that the polygrid is valid
assert(pObj);
//get our polygrid
LTPolyGrid *pGrid = (LTPolyGrid*)pObj;
// Make sure it's initialized.
if(!pGrid->m_Data)
return;
//must have an index buffer
if(!pGrid->m_Indices || (pGrid->m_nIndices == 0))
return;
//and of course, make sure that the size is reasonable
if((pGrid->m_Width < 2) || (pGrid->m_Height < 2))
return;
IncFrameStat(eFS_PolyGridTriangles, pGrid->m_nTris);
//cache the half dimensions
float fHalfGridWidth = ((float)pGrid->m_Width - 1) * 0.5f;
float fHalfGridHeight = ((float)pGrid->m_Height - 1) * 0.5f;
//now we need to build our color lookup table for this polygrid, this is faster for any
//polygrid that is larger than 8x8, and even then we can get a nice tight loop that
//should still be rather optimal
// Set the blending mode based on the flags.
uint32 nSrcBlend, nDestBlend, nFog, nFogColor;
d3d_GetBlendStates(pGrid, nSrcBlend, nDestBlend, nFog, nFogColor);
StateSet ssSrcBlend(D3DRS_SRCBLEND, nSrcBlend);
StateSet ssDestBlend(D3DRS_DESTBLEND, nDestBlend);
StateSet ssFog(D3DRS_FOGENABLE, nFog);
StateSet ssFogColor(D3DRS_FOGCOLOR, nFogColor);
//flag indicating whether or not
bool bEnvMap = false;
bool bCubicEnvMap = false;
bool bBumpMap = false;
//vertex information
uint32 nVertexSize = sizeof(CPolyGridVertex);
uint32 nVertexFVF = POLYGRIDVERTEX_FORMAT;
//UV scales to adjust the texture by (defaults to 1, but if we are bump mapping, this will
//be set to the detail texture scale)
float fPGUScale = 1.0f;
float fPGVScale = 1.0f;
// Set the texture if necessary.
SpriteTracker* pTracker;
LTPixelShader *pPixelShader = NULL;
if(pGrid->m_pSprite)
{
pTracker = &pGrid->m_SpriteTracker;
if(pTracker->m_pCurFrame)
{
SharedTexture* pTex = pTracker->m_pCurFrame->m_pTex;
if(pTex)
{
//get the type of this texture
ESharedTexType eTexType = pTex->m_eTexType;
//the base texture
SharedTexture* pBaseTex = NULL;
//the environment map
SharedTexture* pEnvMapTex = pGrid->m_pEnvMap;
//the bumpmap
SharedTexture* pBumpMapTex = NULL;
//determine our texture data
if(pGrid->m_nPGFlags & PG_NORMALMAPSPRITE)
{
//only use a bump map texture if we actually have an environment map
if(pEnvMapTex)
pBumpMapTex = pTex;
}
else
{
//we have a normal texture
pBaseTex = pTex;
}
// Set up the environment mapping texture if applicable
if( pEnvMapTex && g_CV_EnvMapPolyGrids.m_Val)
{
//see if the is a cubic environment map
RTexture *pRenderTexture = (RTexture*)pEnvMapTex->m_pRenderData;
if(pRenderTexture && pRenderTexture->IsCubeMap())
{
bCubicEnvMap = true;
}
bEnvMap = true;
}
if( pBumpMapTex && g_CV_BumpMapPolyGrids.m_Val)
{
//we now need to make sure that the bump map shader is valid
//see if we need to load it
if (!s_bPixelShaderFailed)
{
// Get the pixel shader.
pPixelShader = LTPixelShaderMgr::GetSingleton().GetPixelShader(LTPixelShader::PIXELSHADER_ENVBUMPMAP);
if (NULL == pPixelShader)
{
FileRef ref;
ref.m_FileType = FILE_ANYFILE;
ref.m_pFilename = "ps\\envbumpmap.psh";
// Try to load it.
ILTStream *pStream = g_pIClientFileMgr->OpenFile(&ref);
if (NULL != pStream)
{
if (LTPixelShaderMgr::GetSingleton().AddPixelShader(pStream, ref.m_pFilename,
LTPixelShader::PIXELSHADER_ENVBUMPMAP, true))
{
pPixelShader = LTPixelShaderMgr::GetSingleton().GetPixelShader(LTPixelShader::PIXELSHADER_ENVBUMPMAP);
}
// Close the file.
pStream->Release();
}
}
}
// See if we can continue.
if (NULL != pPixelShader && pPixelShader->IsValidShader())
{
bBumpMap = true;
nVertexSize = sizeof(CPolyGridBumpVertex);
nVertexFVF = POLYGRIDBUMPVERTEX_FORMAT;
fPGUScale = ((RTexture*)pBumpMapTex->m_pRenderData)->m_DetailTextureScale;
fPGVScale = fPGUScale;
}
else
{
//we failed to create the shader, the device can't support it
s_bPixelShaderFailed = true;
}
}
//setup the textures based upon the configuration
if(bBumpMap)
{
d3d_SetTexture(pBumpMapTex, 0, eFS_PolyGridBumpMapTexMemory);
d3d_SetTexture(pEnvMapTex, 3, eFS_PolyGridEnvMapTexMemory);
}
else
{
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
nVertexSize = sizeof(CPolyGridEffectVertex);
RTexture* pRTexture = (RTexture*)pBaseTex->m_pRenderData;
pD3DEffect->SetTexture("texture0", pRTexture->m_pD3DTexture);
if(bEnvMap)
{
pRTexture = (RTexture*)pEnvMapTex->m_pRenderData;
pD3DEffect->SetTexture("texture1", pRTexture->m_pD3DTexture);
}
}
}else
{
d3d_SetTexture(pBaseTex, 0, eFS_PolyGridBaseTexMemory);
if(bEnvMap)
{
d3d_SetTexture(pEnvMapTex, 1, eFS_PolyGridEnvMapTexMemory);
}
}
}
}
else
{
//if we didn't set any texture, we need to make sure and clear out the texture
//channel
d3d_DisableTexture(0);
}
}
}
//specify that we were visible
pGrid->m_Flags |= FLAG_INTERNAL1;
// Build the vertex list.
uint32 nBufferSize = pGrid->m_Width * pGrid->m_Height * nVertexSize;
if(nBufferSize > g_TriVertListSize)
{
//we need to reallocate our list of vertices
dfree(g_TriVertList);
LT_MEM_TRACK_ALLOC(g_TriVertList = dalloc(nBufferSize),LT_MEM_TYPE_RENDERER);
//check the allocation
if(!g_TriVertList)
{
g_TriVertListSize = 0;
return;
}
g_TriVertListSize = nBufferSize;
}
//determine if this polygrid should be lit or not
bool bFresnel = (pGrid->m_nPGFlags & PG_FRESNEL) && (g_CV_FresnelPolyGrids.m_Val) ? true : false;
//determine what alpha value we should use
uint8 nColorAlpha = 0;
if(!bEnvMap)
nColorAlpha = 255;
else if(!bFresnel)
nColorAlpha = 128;
float fScaledR = pGrid->m_ColorR * MATH_ONE_OVER_255;
float fScaledG = pGrid->m_ColorG * MATH_ONE_OVER_255;
float fScaledB = pGrid->m_ColorB * MATH_ONE_OVER_255;
uint32 nColorTable[256];
for(uint32 nCurrColor = 0; nCurrColor < 256; nCurrColor++)
{
//Note that the color table is 0..255, object color is 0..255 as well
nColorTable[nCurrColor] = D3DRGBA_255( pGrid->m_ColorTable[nCurrColor].x * fScaledR,
pGrid->m_ColorTable[nCurrColor].y * fScaledG,
pGrid->m_ColorTable[nCurrColor].z * fScaledB,
nColorAlpha);
}
//setup our world matrix to represent a space that holds the orientation of the polygrid
//as well as the center position. This allows all operations to take place
//as if performed on the XZ plane (note that we don't do the scale as that tends
//to mess up normals)
LTMatrix mWorldTrans;
LTVector vUnitScale(1.0f, 1.0f, 1.0f);
d3d_SetupTransformation(&pGrid->GetPos(), (float*)&pGrid->m_Rotation, &vUnitScale, &mWorldTrans);
d3d_SetD3DMat(D3DTS_WORLD, &mWorldTrans);
//calculate our position increments
float fXInc = pGrid->GetDims().x * 2.0f / (pGrid->m_Width - 1);
float fZInc = pGrid->GetDims().z * 2.0f / (pGrid->m_Height - 1);
float fYScale = pGrid->GetDims().y / 127.0f;
float fXStart = -fHalfGridWidth * fXInc;
float fCurrX = fXStart;
float fCurrZ = -fHalfGridHeight * fZInc;
int8* pDataPos = (int8*)pGrid->m_Data;
int8* pDataEnd = pDataPos + pGrid->m_Width * pGrid->m_Height;
int8* pLineDataEnd = pDataPos + pGrid->m_Width;
uint32* pColor = nColorTable + 128;
float fXScale = pGrid->m_xScale / ((pGrid->m_Width - 1) * fXInc);
float fZScale = pGrid->m_yScale / ((pGrid->m_Height - 1) * fZInc);
float fStartU = (float)fmod(pGrid->m_xPan * fPGUScale, 1.0f);
float fStartV = (float)fmod(pGrid->m_yPan * fPGVScale, 1.0f);
float fCurrU = fStartU;
float fCurrV = fStartV;
float fUInc = fXInc * fXScale * fPGUScale;
float fVInc = fZInc * fZScale * fPGVScale;
int32 nWidth = pGrid->m_Width;
float fSpacingX = fXInc * 2.0f;
float fSpacingZ = fZInc * 2.0f;
uint32 nNumVerts;
bool bEffect = false;
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
bEffect = true;
}
}
if(bBumpMap)
{
CPolyGridBumpVertex* pVertexPos = (CPolyGridBumpVertex*)g_TriVertList;
if(pGrid->m_pValidMask)
{
//this polygrid has a valid mask, meaning that we need to skip over vertices
//as needed
uint32* pCurrMask = pGrid->m_pValidMask;
//amount to adjust the mask at the end of a line
uint32 nMaskLineAdjust = (pGrid->m_Width % 32) ? 1 : 0;
uint32 nShift;
uint32 nNormalY1 = 0;
uint32 nNormalY2 = nWidth;
float fWidthTimesHeight = fSpacingX * fSpacingZ;
while(pDataPos < pDataEnd)
{
nShift = 0x1;
while(pDataPos < pLineDataEnd)
{
if(*pCurrMask & nShift)
{
//this is valid, add this vertex
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
//generate a normal for it
GenerateBasisSpace(pDataPos, pVertexPos, -1, 1, nNormalY1, nNormalY2, fSpacingX, fSpacingZ, fWidthTimesHeight, fYScale);
//move along to the next vertex
pVertexPos++;
}
pDataPos++;
fCurrX += fXInc;
fCurrU += fUInc;
if(nShift == 0x80000000)
{
pCurrMask++;
nShift = 1;
}
else
{
nShift <<= 1;
}
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
pCurrMask += nMaskLineAdjust;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
//update the normal offsets to ensure we don't go outside of our buffer
nNormalY1 = -nWidth;
if(pLineDataEnd >= pDataEnd)
nNormalY2 = 0;
}
nNumVerts = pVertexPos - (CPolyGridBumpVertex*)g_TriVertList;
}
else
{
nNumVerts = pGrid->m_Width * pGrid->m_Height;
while(pDataPos < pDataEnd)
{
while(pDataPos < pLineDataEnd)
{
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
pDataPos++;
pVertexPos++;
fCurrX += fXInc;
fCurrU += fUInc;
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
}
//now we need to generate the normals for the polygrid
GeneratePolyGridVectors(pGrid, (CPolyGridBumpVertex*)g_TriVertList, GenerateBasisSpace);
}
}
else if(bEffect)
{
CPolyGridEffectVertex* pVertexPos = (CPolyGridEffectVertex*)g_TriVertList;
if(pGrid->m_pValidMask)
{
//this polygrid has a valid mask, meaning that we need to skip over vertices
//as needed
uint32* pCurrMask = pGrid->m_pValidMask;
//amount to adjust the mask at the end of a line
uint32 nMaskLineAdjust = (pGrid->m_Width % 32) ? 1 : 0;
uint32 nShift;
uint32 nNormalY1 = 0;
uint32 nNormalY2 = nWidth;
float fWidthTimesHeight = fSpacingX * fSpacingZ;
while(pDataPos < pDataEnd)
{
nShift = 0x1;
while(pDataPos < pLineDataEnd)
{
if(*pCurrMask & nShift)
{
//this is valid, add this vertex
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
//generate a normal for it
GenerateEffectBasisSpace(pDataPos, pVertexPos, -1, 1, nNormalY1, nNormalY2, fSpacingX, fSpacingZ, fWidthTimesHeight, fYScale);
//move along to the next vertex
pVertexPos++;
}
pDataPos++;
fCurrX += fXInc;
fCurrU += fUInc;
if(nShift == 0x80000000)
{
pCurrMask++;
nShift = 1;
}
else
{
nShift <<= 1;
}
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
pCurrMask += nMaskLineAdjust;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
//update the normal offsets to ensure we don't go outside of our buffer
nNormalY1 = -nWidth;
if(pLineDataEnd >= pDataEnd)
nNormalY2 = 0;
}
nNumVerts = pVertexPos - (CPolyGridEffectVertex*)g_TriVertList;
}
else
{
nNumVerts = pGrid->m_Width * pGrid->m_Height;
while(pDataPos < pDataEnd)
{
while(pDataPos < pLineDataEnd)
{
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
pDataPos++;
pVertexPos++;
fCurrX += fXInc;
fCurrU += fUInc;
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
}
//now we need to generate the normals for the polygrid
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
GeneratePolyGridVectors(pGrid, (CPolyGridEffectVertex*)g_TriVertList, GenerateEffectBasisSpace);
}
}
else
{
GeneratePolyGridVectors(pGrid, (CPolyGridVertex*)g_TriVertList, GenerateNormal);
}
}
}
else //fixed function
{
CPolyGridVertex* pVertexPos = (CPolyGridVertex*)g_TriVertList;
if(pGrid->m_pValidMask)
{
//this polygrid has a valid mask, meaning that we need to skip over vertices
//as needed
uint32* pCurrMask = pGrid->m_pValidMask;
//amount to adjust the mask at the end of a line
uint32 nMaskLineAdjust = (pGrid->m_Width % 32) ? 1 : 0;
uint32 nShift;
uint32 nNormalY1 = 0;
uint32 nNormalY2 = nWidth;
float fWidthTimesHeight = fSpacingX * fSpacingZ;
while(pDataPos < pDataEnd)
{
nShift = 0x1;
while(pDataPos < pLineDataEnd)
{
if(*pCurrMask & nShift)
{
//this is valid, add this vertex
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
//generate a normal for it
GenerateNormal(pDataPos, pVertexPos, -1, 1, nNormalY1, nNormalY2, fSpacingX, fSpacingZ, fWidthTimesHeight, fYScale);
//move along to the next vertex
pVertexPos++;
}
pDataPos++;
fCurrX += fXInc;
fCurrU += fUInc;
if(nShift == 0x80000000)
{
pCurrMask++;
nShift = 1;
}
else
{
nShift <<= 1;
}
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
pCurrMask += nMaskLineAdjust;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
//update the normal offsets to ensure we don't go outside of our buffer
nNormalY1 = -nWidth;
if(pLineDataEnd >= pDataEnd)
nNormalY2 = 0;
}
nNumVerts = pVertexPos - (CPolyGridVertex*)g_TriVertList;
}
else
{
nNumVerts = pGrid->m_Width * pGrid->m_Height;
while(pDataPos < pDataEnd)
{
while(pDataPos < pLineDataEnd)
{
d3d_SetupVertexPos(pVertexPos, fCurrX, *pDataPos * fYScale, fCurrZ, pColor[*pDataPos], fCurrU, fCurrV);
pDataPos++;
pVertexPos++;
fCurrX += fXInc;
fCurrU += fUInc;
}
//reset the line
fCurrX = fXStart;
//update our threshold for when to move onto the next line
pLineDataEnd += pGrid->m_Width;
//update our position
fCurrZ += fZInc;
fCurrU = fStartU;
fCurrV += fVInc;
}
//now we need to generate the normals for the polygrid
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
GeneratePolyGridVectors(pGrid, (CPolyGridEffectVertex*)g_TriVertList, GenerateEffectBasisSpace);
}
}
else
{
GeneratePolyGridVectors(pGrid, (CPolyGridVertex*)g_TriVertList, GenerateNormal);
}
}
}
// Set environment map texture coordinates.
if(bEnvMap && !bBumpMap)
{
d3d_SetEnvMapTextureStates(Params, pTracker->m_pCurFrame->m_pTex->m_eTexType, pGrid, bCubicEnvMap);
}
//see if we are just doing a base texture
if(!bEnvMap && !bBumpMap)
{
d3d_SetDefaultBlendStates();
}
//generate the alpha if we can use it
if(bBumpMap)
{
GeneratePolyGridFresnelAlphaAndCamera(Params.m_Pos, (CPolyGridBumpVertex*)g_TriVertList, pGrid, nNumVerts);
}
else if(bFresnel)
{
GeneratePolyGridFresnelAlpha(Params.m_Pos, (CPolyGridVertex*)g_TriVertList, pGrid, nNumVerts);
}
//make the backfacing polygons cull
StateSet ssCullMode(D3DRS_CULLMODE, (pGrid->m_nPGFlags & PG_NOBACKFACECULL) ? D3DCULL_NONE : D3DCULL_CCW);
//setup the pixel shader if we are bumpmapping
if(bBumpMap)
{
assert(NULL != pPixelShader && pPixelShader->IsValidShader());
// Set the pixel shader constants.
float *pConstants = pPixelShader->GetConstants();
pConstants[0] = 0.0f;
pConstants[1] = 0.0f;
pConstants[2] = 0.0f;
pConstants[3] = pGrid->m_ColorA / 255.0f;
LTPixelShaderMgr::GetSingleton().SetPixelShaderConstants(pPixelShader);
// Install the pixel shader.
LTPixelShaderMgr::GetSingleton().InstallPixelShader(pPixelShader);
//now actually draw the polygrid
D3D_CALL(PD3DDEVICE->SetVertexShader(NULL));
D3D_CALL(PD3DDEVICE->SetFVF(nVertexFVF));
int nNumPolies = (pGrid->m_nIndices/3);
// Is this polygrid larger than our buffer? If so, break it into smaller patches.
if(nNumPolies > g_CV_PolyGridBufferSize)
{
int32 nRemainingPolies = nNumPolies;
uint32 nCurrentVertPosition = 0;
while(nRemainingPolies > 0)
{
uint32 nPoliesThisFrame = (nRemainingPolies > g_CV_PolyGridBufferSize) ? g_CV_PolyGridBufferSize: nRemainingPolies;
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,nPoliesThisFrame,&pGrid->m_Indices[nCurrentVertPosition],D3DFMT_INDEX16,g_TriVertList, nVertexSize));
nCurrentVertPosition += nPoliesThisFrame*3;
nRemainingPolies -= nPoliesThisFrame;
}
}
else
{
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,(pGrid->m_nIndices)/3,pGrid->m_Indices,D3DFMT_INDEX16,g_TriVertList, nVertexSize));
}
// Uninstall the pixel shader.
LTPixelShaderMgr::GetSingleton().UninstallPixelShader();
d3d_DisableTexture(0);
d3d_DisableTexture(3);
}
else
{
//now actually draw the polygrid
D3D_CALL(PD3DDEVICE->SetVertexShader(NULL));
D3D_CALL(PD3DDEVICE->SetFVF(nVertexFVF));
int nNumPolies = (pGrid->m_nIndices/3);
// Is this polygrid larger than our buffer? If so, break it into smaller patches.
if(nNumPolies > g_CV_PolyGridBufferSize)
{
int32 nRemainingPolies = nNumPolies;
uint32 nCurrentVertPosition = 0;
while(nRemainingPolies > 0)
{
uint32 nPoliesThisFrame = (nRemainingPolies > g_CV_PolyGridBufferSize) ? g_CV_PolyGridBufferSize: nRemainingPolies;
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
pEffect->UploadVertexDeclaration();
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
i_client_shell->OnEffectShaderSetParams(pEffect, NULL, NULL, LTShaderDeviceStateImp::GetSingleton());
UINT nPasses = 0;
pD3DEffect->Begin(&nPasses, 0);
for(UINT i = 0; i < nPasses; ++i)
{
pD3DEffect->BeginPass(i);
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,nPoliesThisFrame,&pGrid->m_Indices[nCurrentVertPosition],D3DFMT_INDEX16,g_TriVertList, nVertexSize));
pD3DEffect->EndPass();
}
pD3DEffect->End();
}
}
else
{
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,nPoliesThisFrame,&pGrid->m_Indices[nCurrentVertPosition],D3DFMT_INDEX16,g_TriVertList, nVertexSize));
}
nCurrentVertPosition += nPoliesThisFrame*3;
nRemainingPolies -= nPoliesThisFrame;
}
}
else
{
LTEffectImpl* pEffect = (LTEffectImpl*)LTEffectShaderMgr::GetSingleton().GetEffectShader(pGrid->m_nEffectShaderID);
if(pEffect)
{
pEffect->UploadVertexDeclaration();
ID3DXEffect* pD3DEffect = pEffect->GetEffect();
if(pD3DEffect)
{
i_client_shell->OnEffectShaderSetParams(pEffect, NULL, NULL, LTShaderDeviceStateImp::GetSingleton());
UINT nPasses = 0;
pD3DEffect->Begin(&nPasses, 0);
for(UINT i = 0; i < nPasses; ++i)
{
pD3DEffect->BeginPass(i);
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,(pGrid->m_nIndices)/3,pGrid->m_Indices,D3DFMT_INDEX16,g_TriVertList, nVertexSize));
pD3DEffect->EndPass();
}
pD3DEffect->End();
}
}
else
{
// No Effect Shader, just fixed function.
D3D_CALL(PD3DDEVICE->DrawIndexedPrimitiveUP(D3DPT_TRIANGLELIST,0,nNumVerts,(pGrid->m_nIndices)/3,pGrid->m_Indices,D3DFMT_INDEX16,g_TriVertList, nVertexSize));
}
}
d3d_DisableTexture(0);
d3d_DisableTexture(1);
}
if (bEnvMap)
d3d_UnsetEnvMapTextureStates();
//reset our world transform so that it won't mess up the rendering of other objects
d3d_SetD3DMat(D3DTS_WORLD, &Params.m_mIdentity);
}
//loads the specified script
bool CTextureScriptInterpreter::LoadScript(const char* pszFilename)
{
//clear out any old script
Free();
//now we need to open up the new file
FileRef Ref;
Ref.m_FileType = TYPECODE_UNKNOWN;
Ref.m_pFilename = pszFilename;
FileIdentifier* pIdent = g_pIClientFileMgr->GetFileIdentifier(&Ref, TYPECODE_UNKNOWN);
//open up the stream
ILTStream* pStream = g_pIClientFileMgr->OpenFile(&Ref);
if(!pStream)
return false;
//read in the version
uint16 nVersion;
*pStream >> nVersion;
//make sure the version is correct
if(nVersion != TS_CURR_VERSION)
{
pStream->Release();
return false;
}
//now read in the size of the variable names
uint32 nVarSize;
*pStream >> nVarSize;
//skip over the variables
pStream->SeekTo(pStream->GetPos() + nVarSize);
//read in our input type, output type and our dirty flags
uint32 nInput;
uint32 nOutput;
uint32 nDirty;
*pStream >> nInput >> nOutput >> nDirty;
//now read in the constant table
uint32 nNumConstants;
*pStream >> nNumConstants;
assert(nNumConstants < TS_NUMCONSTANTS);
//now read all the constants into the table
for(uint32 nCurrConstant = 0; nCurrConstant < nNumConstants; nCurrConstant++)
{
*pStream >> m_fVarList[TSVAR_CONSTANT + nCurrConstant];
}
//now it is time to read in the actual bytecode
*pStream >> m_nByteCodeLen;
//allocate our buffer
LT_MEM_TRACK_ALLOC(m_pByteCode = new uint8 [m_nByteCodeLen],LT_MEM_TYPE_RENDER_TEXTURESCRIPT);
//check the allocation
if(!m_pByteCode)
{
pStream->Release();
m_nByteCodeLen = 0;
return false;
}
//read in our buffer
pStream->Read(m_pByteCode, m_nByteCodeLen);
//close our stream
pStream->Release();
//now we need to figure out our internal flags
m_nFlags = 0;
//setup info based upon input
switch(nInput)
{
case TSINPUT_CSNORMAL: m_eInput = INPUT_NORMAL; break;
case TSINPUT_CSPOS: m_eInput = INPUT_POS; break;
case TSINPUT_CSREFLECTION: m_eInput = INPUT_REFLECTION; break;
case TSINPUT_UV: m_eInput = INPUT_UV; break;
case TSINPUT_WSNORMAL: m_eInput = INPUT_NORMAL; m_nFlags |= FLAG_WORLDSPACE; break;
case TSINPUT_WSPOS: m_eInput = INPUT_POS; m_nFlags |= FLAG_WORLDSPACE; break;
case TSINPUT_WSREFLECTION: m_eInput = INPUT_REFLECTION; m_nFlags |= FLAG_WORLDSPACE; break;
default:
assert(false);
break;
}
//setup info based upon output
switch(nOutput)
{
case TSOUTPUT_2: m_nFlags |= FLAG_COORD2; break;
case TSOUTPUT_3: m_nFlags |= FLAG_COORD3; break;
case TSOUTPUT_3PROJ: m_nFlags |= FLAG_COORD3 | FLAG_PROJECTED; break;
case TSOUTPUT_4PROJ: m_nFlags |= FLAG_COORD4 | FLAG_PROJECTED; break;
default:
assert(false);
break;
}
//setup info based upon dirty flags
if(nDirty & TSDIRTY_EVERYUPDATE)
m_nFlags |= FLAG_DIRTYONFRAME;
if(nDirty & TSDIRTY_USERVARCHANGED)
m_nFlags |= FLAG_DIRTYONVAR;
//success
return true;
}
LTBOOL CGameButeMgr::Parse(const char* sButeFile)
{
// Sanity checks...
if (!sButeFile) return(LTFALSE);
BOOL bRet = TRUE;
//if there is no g_pLTBase, then we can't read from the stream
if (!g_pLTBase || !m_bInRezFile)
{
// Append the GAME directory onto the filename if this file is normally
// stored in the .rez file...
if (m_bInRezFile)
{
m_strAttributeFile.Format("Game\\%s", sButeFile);
}
else
{
m_strAttributeFile.Format("%s", sButeFile);
}
if (m_pCryptKey)
{
bRet = m_buteMgr.Parse(m_strAttributeFile, m_pCryptKey);
}
else
{
bRet = m_buteMgr.Parse(m_strAttributeFile);
}
return bRet;
}
// Open the file...
m_strAttributeFile = sButeFile;
ILTStream* pDStream = LTNULL;
LTRESULT dr = g_pLTBase->OpenFile(m_strAttributeFile, &pDStream);
if (dr != LT_OK || !pDStream)
{
char sError[512];
sprintf(sError,"ERROR CGameButeMgr couldn't open file %s!",m_strAttributeFile);
GBM_DisplayError(sError);
#ifdef _CLIENTBUILD
g_pLTClient->ShutdownWithMessage(sError);
#endif
return(FALSE);
}
// Read the file...
unsigned long uLen = pDStream->GetLen();
char* pData = debug_newa(char, uLen);
if (!pData)
{
pDStream->Release();
GBM_DisplayError("ERROR CGameButeMgr couldn't allocate data for stream.");
return(FALSE);
}
pDStream->Read(pData, uLen);
// Setup the save file name. This is for saving the attribute file from
// the game and is ONLY used during development...
CString strSaveFilename = "";
#ifndef _FINAL
strSaveFilename = sButeFile;
if (m_bInRezFile)
{
strSaveFilename.Format("Game\\%s", sButeFile);
}
#endif // _FINAL
// Parse the file...
if (m_pCryptKey)
{
bRet = m_buteMgr.Parse(pData, uLen, m_pCryptKey, strSaveFilename);
}
else
{
bRet = m_buteMgr.Parse(pData, uLen, 0, strSaveFilename);
}
// Clean up...
pDStream->Release();
debug_deletea(pData);
// Check for an error...
if (!bRet)
{
TRACE("ERROR CGameButeMgr::Parse() (%s)!\n", sButeFile);
return(FALSE);
}
// All done...
return(TRUE);
}
// Loads the texture and installs it.
LTRESULT r_LoadSystemTexture(SharedTexture *pSharedTexture)
{
LTRESULT dResult;
FileRef ref;
FileIdentifier *pIdent = pSharedTexture->m_pFile;
if (!pIdent)
return LT_NOTINITIALIZED;
uint32 nBaseWidth;
uint32 nBaseHeight;
//the texture data that is associated with the texture
TextureData* pTextureData = NULL;
ILTStream *pStream = client_file_mgr->OpenFileIdentifier(pIdent);
if (pStream)
{
dResult = dtx_Create(pStream, &pTextureData, nBaseWidth, nBaseHeight);
pStream->Release();
if (dResult != LT_OK)
return dResult;
}
else
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_MISSINGFILE, pIdent->m_Filename);
}
//make sure to setup the texture information
pSharedTexture->SetTextureInfo(nBaseWidth, nBaseHeight, pTextureData->m_PFormat);
// Add the new texture to the MRU list.
dl_AddHead(&g_SysCache.m_List, &pTextureData->m_Link, pTextureData);
g_SysCache.m_CurMem += pTextureData->m_AllocSize;
// Store its pointer in the SharedTexture.
pSharedTexture->m_pEngineData = pTextureData;
pTextureData->m_pSharedTexture = pSharedTexture;
// Load in any linked textures depending upon what the user entered in the command string. Note
//that these are exclusive
ConParse parse;
//Normal detail texturing
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("DetailTex", LTFALSE, 1))
{
//validate the argument count
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "DetailTex : parse.m_Args[1]");
}
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_Detail, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_Detail;
return LT_OK;
}
//Normal environment mapping
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("EnvMap", LTFALSE, 1))
{
//validate the argument count
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvMap : parse.m_Args[1]");
}
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_EnvMap, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_EnvMap;
return LT_OK;
}
//Environment mapping blended with the alpha of the base texture
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("EnvMapAlpha", LTFALSE, 1))
{
//validate the argument count
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvMapAlpha : parse.m_Args[1]");
}
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_EnvMap, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_EnvMapAlpha;
return LT_OK;
}
//Environment mapping with a bumpmap texture
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("EnvBumpMap", LTFALSE, 2))
{
//validate the argument count
if(parse.m_nArgs < 3)
{
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvBumpMap : parse.m_Args[1]");
}
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvBumpMap : parse.m_Args[2]");
}
//handle loading up the environment map first
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_EnvMap, g_pClientMgr->AddSharedTexture(&ref));
//now handle loading up the bumpmap
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[2];
pSharedTexture->SetLinkedTexture(eLinkedTex_BumpMap, g_pClientMgr->AddSharedTexture(&ref));
//setup the shader type
pSharedTexture->m_eTexType = eSharedTexType_EnvBumpMap;
return LT_OK;
}
//Environment mapping with a bumpmap texture but no fallback
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("EnvBumpMapNoFallback", LTFALSE, 2))
{
//validate the argument count
if(parse.m_nArgs < 3)
{
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvBumpMapNoFallback : parse.m_Args[1]");
}
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "EnvBumpMapNoFallback : parse.m_Args[2]");
}
//handle loading up the environment map first
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_EnvMap, g_pClientMgr->AddSharedTexture(&ref));
//now handle loading up the bumpmap
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[2];
pSharedTexture->SetLinkedTexture(eLinkedTex_BumpMap, g_pClientMgr->AddSharedTexture(&ref));
//setup the shader type
pSharedTexture->m_eTexType = eSharedTexType_EnvBumpMap_NoFallback;
return LT_OK;
}
//DOT3 bumpmap texture
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("DOT3BumpMap", LTFALSE, 1))
{
//validate the argument count
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "DOT3BumpMap : parse.m_Args[1]");
}
//now handle loading up the bumpmap
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_BumpMap, g_pClientMgr->AddSharedTexture(&ref));
//setup the shader type
pSharedTexture->m_eTexType = eSharedTexType_DOT3BumpMap;
return LT_OK;
}
//Environment mapping with a DOT3 bumpmap texture but no fallback
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("DOT3EnvBumpMap", LTFALSE, 2))
{
//validate the argument count
if(parse.m_nArgs < 3)
{
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "DOT3EnvBumpMap : parse.m_Args[1]");
}
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "DOT3EnvBumpMap : parse.m_Args[2]");
}
//handle loading up the environment map first
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[1];
pSharedTexture->SetLinkedTexture(eLinkedTex_EnvMap, g_pClientMgr->AddSharedTexture(&ref));
//now handle loading up the bumpmap
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[2];
pSharedTexture->SetLinkedTexture(eLinkedTex_BumpMap, g_pClientMgr->AddSharedTexture(&ref));
//setup the shader type
pSharedTexture->m_eTexType = eSharedTexType_DOT3EnvBumpMap;
return LT_OK;
}
//Effect File Support
parse.Init(pTextureData->m_Header.m_CommandString);
if (parse.ParseFind("Effect", LTFALSE, 1))
{
//validate the argument count
if(parse.m_nArgs < 2)
{
RETURN_ERROR_PARAM(1, r_LoadSystemTexture, LT_INVALIDDATA, "Effect : parse.m_Args[1]");
}
// Set up our shader ID
pSharedTexture->m_nShaderID = (int)atoi(parse.m_Args[1]);
pSharedTexture->m_eTexType = eSharedTexType_Effect;
if(parse.m_nArgs > 2)
{
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[2];
pSharedTexture->SetLinkedTexture(eLinkedTex_EffectTexture1, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_Effect;
}
if(parse.m_nArgs > 3)
{
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[3];
pSharedTexture->SetLinkedTexture(eLinkedTex_EffectTexture2, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_Effect;
}
if(parse.m_nArgs > 4)
{
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[4];
pSharedTexture->SetLinkedTexture(eLinkedTex_EffectTexture3, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_Effect;
}
if(parse.m_nArgs > 5)
{
ref.m_FileType = FILE_CLIENTFILE;
ref.m_pFilename = parse.m_Args[5];
pSharedTexture->SetLinkedTexture(eLinkedTex_EffectTexture4, g_pClientMgr->AddSharedTexture(&ref));
pSharedTexture->m_eTexType = eSharedTexType_Effect;
}
return LT_OK;
}
//just a normal texture...
return LT_OK;
}
LTBOOL CGameButeMgr::Parse(ILTCSBase *pInterface, const char* sButeFile)
{
// Sanity checks...
if (!sButeFile) return(LTFALSE);
BOOL bRet = TRUE;
// NOTE!!! When _REZFILE is defined, this code will need to be
// updated to support being called from DEdit!!!!
// (from a IObjectPlugin::PreHook_EditStringList() call)...
#if !defined(_REZFILE)
// If we're going to allow the bute file to be saved by the game, it must
// be read in from a file (not a .rez file)...
// Append the NOLF directory onto the filename if this file is normally
// stored in the .rez file...
if (m_bInRezFile)
{
m_strAttributeFile.Format("NOLF\\%s", sButeFile);
}
else
{
m_strAttributeFile.Format("%s", sButeFile);
}
if (m_pCryptKey)
{
bRet = m_buteMgr.Parse(m_strAttributeFile, m_pCryptKey);
}
else
{
bRet = m_buteMgr.Parse(m_strAttributeFile);
}
return bRet;
#endif // !_REZFILE
m_strAttributeFile = sButeFile;
// Open the file...
char sConstFile[256];
strncpy(sConstFile, sButeFile, 255);
ILTStream* pDStream;
LTRESULT dr = pInterface->OpenFile(sConstFile, &pDStream);
if (dr != LT_OK)
{
char sError[512];
sprintf(sError,"ERROR CGameButeMgr couldn't open file %s!",sButeFile);
GBM_DisplayError(sError);
#ifdef _CLIENTBUILD
g_pLTClient->ShutdownWithMessage(sError);
#endif
return(FALSE);
}
// Read the file...
unsigned long uLen = pDStream->GetLen();
char* pData = debug_newa(char, uLen);
if (!pData)
{
pDStream->Release();
GBM_DisplayError("CGameButeMgr couldn't allocate data for stream.");
return(FALSE);
}
pDStream->Read(pData, uLen);
// Parse the file...
if (m_pCryptKey)
{
bRet = m_buteMgr.Parse(pData, uLen, m_pCryptKey);
}
else
{
bRet = m_buteMgr.Parse(pData, uLen);
}
// Clean up...
pDStream->Release();
debug_deletea(pData);
// Check for an error...
if (!bRet)
{
TRACE("CGameButeMgr::Parse() ERROR!\n");
return(FALSE);
}
// All done...
return(TRUE);
}
uint32 GetWorldTextureInfo(CPreWorld *pWorld, CGLinkedList<TInfo*> &theList)
{
GPOS pos;
CPreSurface *pSurface;
uint32 nFlagsGotten;
TInfo *pFlags;
char fileName[MAX_PATH];
ILTStream *pStream;
TextureData *pData;
char pszTextureName[MAX_PATH];
nFlagsGotten = 0;
for(pos=pWorld->m_Surfaces; pos; )
{
pSurface = pWorld->m_Surfaces.GetNext(pos);
for(uint32 nCurrTex = 0; nCurrTex < CPreSurface::NUM_TEXTURES; nCurrTex++)
{
CPreTexture& Tex = pSurface->m_Texture[nCurrTex];
if(!Tex.IsValid())
continue;
pFlags = FindTInfo(theList, Tex.m_pTextureName);
if(pFlags)
{
++nFlagsGotten;
}
else
{
//see if this is a sprite
if(CSpriteFile::IsSprite(Tex.m_pTextureName))
{
//build up the sprite filename
sprintf(fileName, "%s\\%s", g_pGlobs->m_ProjectDir, Tex.m_pTextureName);
//open up the file
CSpriteFile Sprite;
if(!Sprite.Load(fileName))
continue;
if(Sprite.GetNumFrames() > 0)
{
//read in the first string
strcpy(pszTextureName, Sprite.GetFrame(0));
}
}
else
{
//we have a texture, so lets copy it over
strcpy(pszTextureName, Tex.m_pTextureName);
}
sprintf(fileName, "%s\\%s", g_pGlobs->m_ProjectDir, pszTextureName);
pStream = streamsim_Open(fileName, "rb");
if(pStream)
{
if(dtx_Create(pStream, &pData, TRUE, TRUE) == DE_OK)
{
pFlags = new TInfo;
pFlags->m_Width = pData->m_Header.m_BaseWidth;
pFlags->m_Height = pData->m_Header.m_BaseHeight;
pFlags->m_pTextureName = (char*)Tex.m_pTextureName;
pFlags->m_Flags = (uint16)pData->m_Header.m_UserFlags;
theList.Append(pFlags);
++nFlagsGotten;
dtx_Destroy(pData);
}
pStream->Release();
}
}
}
}
return nFlagsGotten;
}
STDMETHODIMP CLTDMFileStream::Clone( IStream** ppstm )
{
HRESULT hr;
// allocate a new stream object
CLTDMFileStream* pStream = new CLTDMFileStream( m_pLoader );
if ( !pStream )
return E_FAIL;
// get the IStream interface
hr = pStream->QueryInterface( IID_IStream, (void**) ppstm );
// if everything is OK, set up the seek position
if ( SUCCEEDED( hr ) )
{
#ifdef USE_FILE
pStream->m_pFile = this->m_pFile;
#endif
#ifdef USE_REZMGR
pStream->m_pRezItem = this->m_pRezItem;
pStream->m_nCurPos = this->m_nCurPos;
#endif
#ifdef USE_DSTREAM
pStream->m_pLoader = this->m_pLoader;
// add a new queue item, identical to the current one
const char* sFileName = this->m_pOpenQueueItem->GetFileName();
CDStreamOpenQueueItem* pOpenQueueItem;
pOpenQueueItem = g_LTDMDStreamOpenQueueMgr.Create(sFileName);
pStream->m_pOpenQueueItem = pOpenQueueItem;
if ( !pOpenQueueItem )
return E_FAIL;
// now set the seek parameter
// make sure the file is open and get a pointer to the ILTStream
ILTStream* pLTStream = pOpenQueueItem->LockDStream();
if (pLTStream == LTNULL)
{
return E_FAIL;
}
// current position in an item
DWORD nSeekPos;
LARGE_INTEGER nCurPos;
if (pLTStream->GetPos((uint32*)&nCurPos.LowPart) != LT_OK)
{
pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
nCurPos.HighPart = 0;
LARGE_INTEGER nNewPos;
nNewPos.QuadPart = nCurPos.QuadPart;
nSeekPos = nNewPos.LowPart;
// do the seek
if (pLTStream->SeekTo(nSeekPos) != LT_OK)
{
// return fail if we failed
pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
pOpenQueueItem->UnLockDStream();
#endif
}
return S_OK;
}
STDMETHODIMP CLTDMFileStream::Seek( LARGE_INTEGER dlibMove, unsigned long dwOrigin, ULARGE_INTEGER* plibNewPosition )
{
#ifdef USE_DSTREAM
// make sure our file item pointer is valid
if (m_pOpenQueueItem == NULL)
{
return E_FAIL;
}
// make sure the file is open and get a pointer to the ILTStream
ILTStream* pLTStream = m_pOpenQueueItem->LockDStream();
if (pLTStream == LTNULL)
{
return E_FAIL;
}
// current position in an item
DWORD nSeekPos;
// figure out the seek position relative to the origin
if (dwOrigin == SEEK_SET)
{
nSeekPos = dlibMove.LowPart;
}
else
{
// relative to current position
if (dwOrigin == SEEK_CUR)
{
LARGE_INTEGER nCurPos;
if (pLTStream->GetPos((uint32*)&nCurPos.LowPart) != LT_OK)
{
m_pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
nCurPos.HighPart = 0;
LARGE_INTEGER nNewPos;
nNewPos.QuadPart = nCurPos.QuadPart + dlibMove.QuadPart;
nSeekPos = nNewPos.LowPart;
// we don't need to seek if we didn't ask to move anywhere
if (dlibMove.QuadPart == 0)
{
// set the return current position if it was not NULL
if( plibNewPosition != NULL )
{
plibNewPosition->QuadPart = nCurPos.QuadPart;
}
m_pOpenQueueItem->UnLockDStream();
return S_OK;
}
}
else
{
if (dwOrigin == SEEK_END)
{
LARGE_INTEGER nSize;
pLTStream->GetLen((uint32*)&nSize.LowPart);
nSize.HighPart = 0;
LARGE_INTEGER nNewPos;
nNewPos.QuadPart = nSize.QuadPart + dlibMove.QuadPart;
nSeekPos = nNewPos.LowPart;
}
else
{
// unknown origin we must fail
m_pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
}
}
// do the seek
if (pLTStream->SeekTo(nSeekPos) != LT_OK)
{
// return fail if we failed
m_pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
// set the return current position if it was not NULL
if( plibNewPosition != NULL )
{
pLTStream->GetPos((uint32*)&plibNewPosition->LowPart);
if( dlibMove.LowPart < 0 )
{
plibNewPosition->HighPart = (uint32)-1;
}
else
{
plibNewPosition->HighPart = 0;
}
}
// everything worked so we return successful
m_pOpenQueueItem->UnLockDStream();
return S_OK;
#endif
#ifdef USE_REZMGR
// if the loader doesn't exist fail
if (m_pLoader == NULL)
{
LTDMConOutError("LTDirectMusic loader failed to seek from file because no directmusic loader exists\n");
return E_FAIL;
}
m_pLoader->EnterRezMgrCriticalSection();
// if the rezmgr is not open
if (!m_pLoader->GetRezMgr()->IsOpen())
{
LTDMConOutError("LTDirectMusic loader failed to seek from file because rez file was not open\n");
m_pLoader->LeaveRezMgrCriticalSection();
return E_FAIL;
}
// current position in an item
DWORD nSeekPos;
// figure out the seek position relative to the origin
if (dwOrigin == SEEK_SET)
{
nSeekPos = dlibMove.LowPart;
}
else
{
// relative to current position
if (dwOrigin == SEEK_CUR)
{
LARGE_INTEGER nCurPos;
nCurPos.LowPart = m_nCurPos;;
nCurPos.HighPart = 0;
LARGE_INTEGER nNewPos;
nNewPos.QuadPart = nCurPos.QuadPart + dlibMove.QuadPart;
nSeekPos = nNewPos.LowPart;
}
else
{
if (dwOrigin == SEEK_END)
{
LARGE_INTEGER nSize;
nSize.LowPart = m_pRezItem->GetSize();
nSize.HighPart = 0;
LARGE_INTEGER nNewPos;
nNewPos.QuadPart = nSize.QuadPart + dlibMove.QuadPart;
nSeekPos = nNewPos.LowPart;
}
else
{
// unknown origin we must fail
LTDMConOutError("LTDirectMusic failed to seek in file %s invalid seek origin\n",m_pRezItem->GetName());
m_pLoader->LeaveRezMgrCriticalSection();
return E_FAIL;
}
}
}
// do the seek
m_nCurPos = nSeekPos;
// set the return current position if it was not NULL
if( plibNewPosition != NULL )
{
plibNewPosition->LowPart = m_nCurPos;
plibNewPosition->HighPart = 0;
}
// everything worked so we return successful
m_pLoader->LeaveRezMgrCriticalSection();
return S_OK;
#endif
#ifdef USE_FILE
// fseek can't handle a LARGE_INTEGER seek...
long lOffset;
lOffset = dlibMove.LowPart;
int i = fseek( m_pFile, lOffset, dwOrigin );
if( i )
{
return E_FAIL;
}
if( plibNewPosition != NULL )
{
plibNewPosition->LowPart = ftell( m_pFile );
if( lOffset < 0 )
{
plibNewPosition->HighPart = -1;
}
else
{
plibNewPosition->HighPart = 0;
}
}
return S_OK;
#endif
}
/* IStream methods */
STDMETHODIMP CLTDMFileStream::Read( void* pv, ULONG cb, ULONG* pcbRead )
{
#ifdef USE_DSTREAM
// make sure our file item pointer is valid
if (m_pOpenQueueItem == NULL)
{
return E_FAIL;
}
// make sure the file is open and get a pointer to the ILTStream
ILTStream* pLTStream = m_pOpenQueueItem->LockDStream();
if (pLTStream == LTNULL)
{
return E_FAIL;
}
// read in the data
if (pLTStream->Read( pv, cb) != LT_OK)
{
m_pOpenQueueItem->UnLockDStream();
return E_FAIL;
}
// set the number of bytes read
if (pcbRead != NULL) *pcbRead = cb;
m_pOpenQueueItem->UnLockDStream();
return S_OK;
#endif
#ifdef USE_REZMGR
// if the loader doesn't exist fail
if (m_pLoader == NULL)
{
LTDMConOutError("LTDirectMusic loader failed to read from file because no directmusic loader exists\n");
return E_FAIL;
}
m_pLoader->EnterRezMgrCriticalSection();
// if the rezmgr is not open
if (!m_pLoader->GetRezMgr()->IsOpen())
{
LTDMConOutError("LTDirectMusic loader failed to read from file because rez file was not open\n");
m_pLoader->LeaveRezMgrCriticalSection();
return E_FAIL;
}
// variable to hold the actual number of bytes that were read in when read is called
size_t nBytesRead;
// read the data from the rez file
nBytesRead = m_pRezItem->Read(pv, cb, m_nCurPos);
// advance seek pos
m_nCurPos += nBytesRead;
// return OK if we read all of the requested data
if(cb == nBytesRead)
{
// set the number of bytes read callback if it is not NULL
if(pcbRead != NULL)*pcbRead = nBytesRead;
m_pLoader->LeaveRezMgrCriticalSection();
return S_OK;
}
// if we didn't read all of the data fail
else
{
m_pLoader->LeaveRezMgrCriticalSection();
return E_FAIL;
}
m_pLoader->LeaveRezMgrCriticalSection();
#endif
#ifdef USE_FILE
size_t dw;
dw = fread( pv, sizeof(char), cb, m_pFile );
if( cb == dw )
{
if( pcbRead != NULL )
{
*pcbRead = cb;
}
return S_OK;
}
return E_FAIL ;
#endif
}
