void EditPatchMod::ActivateSubSelSet(TSTR &setName)
{
MaybeFixupNamedSels();
ModContextList mcList;
INodeTab nodes;
int index = FindSet(setName, selLevel);
if (index < 0 || !ip)
return;
ip->GetModContexts(mcList, nodes);
theHold.Begin();
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
patchData->BeginEdit(ip->GetTime());
// If that set exists in this context, deal with it
GenericNamedSelSetList &sel = patchData->GetSelSet(this);
BitArray *set = sel.GetSet(setName);
if (set)
{
if (theHold.Holding())
theHold.Put(new PatchSelRestore(patchData, this, patch));
BitArray *psel = GetLevelSelectionSet(patch, rpatch); // Get the appropriate selection set
AssignSetMatchSize(*psel, *set);
PatchSelChanged();
}
patchData->UpdateChanges(patch, rpatch, FALSE);
if (patchData->tempData)
patchData->TempData(this)->Invalidate(PART_SELECT);
}
theHold.Accept(GetString(IDS_DS_SELECT));
nodes.DisposeTemporary();
NotifyDependents(FOREVER, PART_SELECT, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime());
}
void EditFaceDataMod::InvertSelection(int selLevel) {
ModContextList list;
INodeTab nodes;
ip->GetModContexts(list,nodes);
EditFaceDataModData *d;
for (int i=0; i<list.Count(); i++) {
d = (EditFaceDataModData*)list[i]->localData;
if (!d) continue;
if (theHold.Holding() && !d->GetHeld()) theHold.Put(new SelectRestore(this,d));
d->SynchSize();
switch (selLevel) {
case SEL_FACE:
d->GetFaceSel() = ~d->GetFaceSel();
break;
}
}
nodes.DisposeTemporary();
SelectionChanged ();
}
bool SmoothingGroupUIHandler::GetSmoothingGroups (EPolyMod *pMod, DWORD *anyFaces, DWORD *allFaces, bool useSel) {
bool ret = true;
// Initialization:
*anyFaces = 0;
if (allFaces) *allFaces = ~0;
bool useStackSelection = pMod->getParamBlock()->GetInt (epm_stack_selection) != 0;
ModContextList list;
INodeTab nodes;
pMod->EpModGetIP()->GetModContexts (list, nodes);
for (int i=0; i<list.Count(); i++)
{
EditPolyData *pData = (EditPolyData *) list[i]->localData;
if (!pData) continue;
MNMesh *pMesh = pData->GetMeshOutput();
if (!pMesh) {
ret = false;
continue;
}
DWORD l_selFlag = useStackSelection ? MN_EDITPOLY_STACK_SELECT:MN_SEL;
for (int j=0; j<pMesh->numf; j++)
{
if (useSel && !pMesh->f[j].GetFlag (l_selFlag))
continue;
if (pMesh->f[j].GetFlag (MN_DEAD))
continue;
*anyFaces |= pMesh->f[j].smGroup;
if (allFaces) *allFaces &= pMesh->f[j].smGroup;
}
}
nodes.DisposeTemporary ();
if (allFaces) *allFaces &= *anyFaces;
return ret;
}
INode *EditPolyMod::EpModGetPrimaryNode ()
{
if (!ip) return NULL;
ModContextList list;
INodeTab nodes;
ip->GetModContexts(list,nodes);
INode *ret = NULL;
for (int i=0; i<list.Count(); i++)
{
if (list[i]->localData == NULL) continue;
EditPolyData *pData = (EditPolyData *) list[i]->localData;
if (pData->GetFlag (kEPDataPrimary))
{
ret = nodes[i];
break;
}
}
if (!ret) {
// No primary? Ok, return first one we get to (and make it primary).
for (int i=0; i<list.Count(); i++)
{
if (list[i]->localData == NULL) continue;
EditPolyData *pData = (EditPolyData *) list[i]->localData;
pData->SetFlag (kEPDataPrimary);
ret = nodes[i];
break;
}
}
if (ret) ret = ret->GetActualINode ();
nodes.DisposeTemporary();
return ret;
}
void EditFaceDataMod::SelectSubComponent (HitRecord *hitRec, BOOL selected, BOOL all, BOOL invert) {
EditFaceDataModData *d = NULL, *od = NULL;
ModContextList mcList;
INodeTab nodes;
ip->GetModContexts(mcList,nodes);
BitArray nsel;
for (int nd=0; nd<mcList.Count(); nd++) {
d = (EditFaceDataModData*) mcList[nd]->localData;
if (d==NULL) continue;
HitRecord *hr = hitRec;
if (!all && (hr->modContext->localData != d)) continue;
for (; hr!=NULL; hr=hr->Next()) if (hr->modContext->localData == d) break;
if (hr==NULL) continue;
Mesh *mesh = d->GetCacheMesh();
MNMesh *mnmesh = d->GetCacheMNMesh();
if (!mesh && !mnmesh) continue;
if (theHold.Holding() && !d->GetHeld()) theHold.Put (new SelectRestore (this, d));
switch (selLevel) {
case SEL_FACE:
nsel = d->GetFaceSel();
for (; hr != NULL; hr=hr->Next()) {
if (d != hr->modContext->localData) continue;
nsel.Set (hr->hitInfo, invert ? !d->GetFaceSel()[hr->hitInfo] : selected);
if (!all) break;
}
d->GetFaceSel() = nsel;
break;
}
}
nodes.DisposeTemporary ();
SelectionChanged ();
}
void VertexPaint::EndEditParams( IObjParam *ip, ULONG flags,Animatable *next)
{
// Dsiable Painting.
bool lpm= _LastPaintMode;
ActivatePaint(FALSE);
// bkup lastPainMode
_LastPaintMode= lpm;
ReleaseISpinner (iTint);
ReleaseISpinner (iGradientBend);
ModContextList list;
INodeTab nodes;
ip->GetModContexts(list,nodes);
for (int i=0; i<list.Count(); i++) {
VertexPaintData *vd = (VertexPaintData*)list[i]->localData;
if (vd) vd->FreeCache();
}
nodes.DisposeTemporary();
// Reset show end result
SetFlag (VP_DISP_END_RESULT, ip->GetShowEndResult() ? TRUE : FALSE);
ip->SetShowEndResult(oldShowEnd);
// Exit editMod => draw true colored weights.
editMod = NULL;
NotifyDependents(FOREVER, PART_VERTCOLOR, REFMSG_CHANGE);
ip->DeleteRollupPage(hParams);
hParams = NULL;
iTint = NULL;
iGradientBend= NULL;
this->ip = NULL;
}
// Selection set, misc fixup utility function
// This depends on PatchMesh::RecordTopologyTags being called prior to the topo changes
void EditPatchMod::ResolveTopoChanges()
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
ip->GetModContexts(mcList, nodes);
ClearPatchDataFlag(mcList, EPD_BEENDONE);
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
// First, the vertex selections
int set;
for (set = 0; set < patchData->vselSet.Count(); ++set)
{
BitArray *oldVS = &patchData->vselSet[set];
BitArray newVS;
newVS.SetSize(patch->numVerts);
for (int vert = 0; vert < patch->numVerts; ++vert)
{
// Get the knot's previous location, then copy that selection into the new set
int tag = patch->verts[vert].aux1;
if (tag >= 0)
newVS.Set(vert, (*oldVS)[tag]);
else
newVS.Clear(vert);
}
if (theHold.Holding())
theHold.Put(new ChangeNamedSetRestore(&patchData->vselSet, set, oldVS));
patchData->vselSet[set] = newVS;
}
// Now the edge selections
for (set = 0; set < patchData->eselSet.Count(); ++set)
{
BitArray *oldES = &patchData->eselSet[set];
BitArray newES;
newES.SetSize(patch->numEdges);
for (int edge = 0; edge < patch->numEdges; ++edge)
{
// Get the knot's previous location, then copy that selection into the new set
int tag = patch->edges[edge].aux1;
if (tag >= 0)
newES.Set(edge, (*oldES)[tag]);
else
newES.Clear(edge);
}
if (theHold.Holding())
theHold.Put(new ChangeNamedSetRestore(&patchData->eselSet, set, oldES));
patchData->eselSet[set] = newES;
}
// Now the patch selections
for (set = 0; set < patchData->pselSet.Count(); ++set)
{
BitArray *oldPS = &patchData->pselSet[set];
BitArray newPS;
newPS.SetSize(patch->numPatches);
for (int p = 0; p < patch->numPatches; ++p)
{
// Get the knot's previous location, then copy that selection into the new set
int tag = patch->patches[p].aux1;
if (tag >= 0)
newPS.Set(p, (*oldPS)[tag]);
else
newPS.Clear(p);
}
if (theHold.Holding())
theHold.Put(new ChangeNamedSetRestore(&patchData->pselSet, set, oldPS));
patchData->pselSet[set] = newPS;
}
// watje 4-16-99
patch->HookFixTopology();
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
}
void EditPatchMod::ActivateSubobjSel(int level, XFormModes& modes)
{
ModContextList mcList;
INodeTab nodes;
int old = selLevel;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
selLevel = level;
// 3-10-99 watje
if (level != EP_PATCH)
{
if (ip->GetCommandMode() == bevelMode)
ip->SetStdCommandMode(CID_OBJMOVE);
if (ip->GetCommandMode() == extrudeMode)
ip->SetStdCommandMode(CID_OBJMOVE);
if (inBevel)
{
ISpinnerControl *spin;
spin = GetISpinner(GetDlgItem(hOpsPanel, IDC_EP_OUTLINESPINNER));
if (spin)
{
HWND hWnd = spin->GetHwnd();
SendMessage(hWnd, WM_LBUTTONUP, 0, 0);
ReleaseISpinner(spin);
}
}
if (inExtrude)
{
ISpinnerControl *spin;
spin = GetISpinner(GetDlgItem(hOpsPanel, IDC_EP_EXTRUDESPINNER));
if (spin)
{
HWND hWnd = spin->GetHwnd();
SendMessage(hWnd, WM_LBUTTONUP, 0, 0);
ReleaseISpinner(spin);
}
}
}
if (level != EP_VERTEX)
{
if (ip->GetCommandMode() == bindMode)
ip->SetStdCommandMode(CID_OBJMOVE);
}
switch (level)
{
case EP_OBJECT:
// Not imp.
break;
case EP_PATCH:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_EDGE:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_VERTEX:
modes = XFormModes(moveMode, rotMode, nuscaleMode, uscaleMode, squashMode, selectMode);
break;
case EP_TILE:
modes = XFormModes(NULL, NULL, NULL, NULL, NULL, selectMode);
break;
}
if (selLevel != old)
{
SetSubobjectLevel(level);
// Modify the caches to reflect the new sel level.
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (patch)
{
if (selLevel == EP_VERTEX)
patch->dispFlags = DISP_VERTS;
else
patch->dispFlags = 0;
if (displayLattice)
patch->SetDispFlag(DISP_LATTICE);
patch->SetDispFlag(patchLevelDispFlags[selLevel]);
patch->selLevel = patchLevel[selLevel];
rpatch->SetSelLevel (selLevel);
}
}
}
NotifyDependents(FOREVER, PART_SUBSEL_TYPE | PART_DISPLAY, REFMSG_CHANGE);
ip->PipeSelLevelChanged();
// Update selection UI display, named sel
SelectionChanged();
}
nodes.DisposeTemporary();
}
void EditPatchMod::InvertSelection(int selLevel)
{
// Don't do anything if at vertex level with verts turned off
if (selLevel == EP_VERTEX && !filterVerts)
return;
if (selLevel == EP_OBJECT)
return;
ModContextList mcList;
INodeTab nodes;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
ip->ClearCurNamedSelSet();
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
patchData->BeginEdit(ip->GetTime());
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "InvertSelection"));
switch (selLevel)
{
case EP_VERTEX:
{
patch->vertSel = ~patch->vertSel;
break;
}
case EP_EDGE:
{
patch->edgeSel = ~patch->edgeSel;
break;
}
case EP_PATCH:
{
patch->patchSel = ~patch->patchSel;
break;
}
case EP_TILE:
{
rpatch->tileSel = ~rpatch->tileSel;
break;
}
}
UnselectHiddenPatches(selLevel, patch);
patchData->UpdateChanges(patch, rpatch, FALSE);
if (patchData->tempData)
{
patchData->TempData(this)->Invalidate(PART_SELECT);
}
PatchSelChanged();
}
nodes.DisposeTemporary();
NotifyDependents(FOREVER, PART_SELECT, REFMSG_CHANGE);
}
void EditPatchMod::NewSetFromCurSel(TSTR &setName)
{
MaybeFixupNamedSels();
ModContextList mcList;
INodeTab nodes;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
GenericNamedSelSetList &sel = patchData->GetSelSet(this);
BitArray *exist = sel.GetSet(setName);
switch (selLevel)
{
case EP_VERTEX:
if (exist)
{
*exist = patch->vertSel;
} else
{
patchData->vselSet.AppendSet(patch->vertSel, 0, setName);
}
break;
case EP_PATCH:
if (exist)
{
*exist = patch->patchSel;
} else
{
patchData->pselSet.AppendSet(patch->patchSel, 0, setName);
}
break;
case EP_EDGE:
if (exist)
{
*exist = patch->edgeSel;
} else
{
patchData->eselSet.AppendSet(patch->edgeSel, 0, setName);
}
break;
}
}
int index = FindSet(setName, selLevel);
if (index < 0)
AddSet(setName, selLevel);
nodes.DisposeTemporary();
}
int EditPatchMod::DoAttach(INode *node, PatchMesh *attPatch, RPatchMesh *rattPatch, bool & canUndo)
{
ModContextList mcList;
INodeTab nodes;
if (!ip)
return 0;
ip->GetModContexts(mcList, nodes);
if (mcList.Count() != 1)
{
nodes.DisposeTemporary();
return 0;
}
EditPatchData *patchData =(EditPatchData*)mcList[0]->localData;
if (!patchData)
{
nodes.DisposeTemporary();
return 0;
}
patchData->BeginEdit(ip->GetTime());
// If the mesh isn't yet cached, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
{
nodes.DisposeTemporary();
return 0;
}
patchData->RecordTopologyTags(patch);
RecordTopologyTags();
// Transform the shape for attachment:
// If reorienting, just translate to align pivots
// Otherwise, transform to match our transform
Matrix3 attMat(1);
if (attachReorient)
{
Matrix3 thisTM = nodes[0]->GetNodeTM(ip->GetTime());
Matrix3 thisOTMBWSM = nodes[0]->GetObjTMBeforeWSM(ip->GetTime());
Matrix3 thisPivTM = thisTM * Inverse(thisOTMBWSM);
Matrix3 otherTM = node->GetNodeTM(ip->GetTime());
Matrix3 otherOTMBWSM = node->GetObjTMBeforeWSM(ip->GetTime());
Matrix3 otherPivTM = otherTM * Inverse(otherOTMBWSM);
Point3 otherObjOffset = node->GetObjOffsetPos();
attMat = Inverse(otherPivTM) * thisPivTM;
}
else
{
attMat = node->GetObjectTM(ip->GetTime()) *
Inverse(nodes[0]->GetObjectTM(ip->GetTime()));
}
// RB 3-17-96 : Check for mirroring
AffineParts parts;
decomp_affine(attMat, &parts);
if (parts.f < 0.0f)
{
int v[8], ct, ct2, j;
Point3 p[9];
for (int i = 0; i < attPatch->numPatches; i++)
{
// Re-order rpatch
if (attPatch->patches[i].type == PATCH_QUAD)
{
UI_PATCH rpatch=rattPatch->getUIPatch (i);
int ctU=rpatch.NbTilesU<<1;
int ctV=rpatch.NbTilesV<<1;
int nU;
for (nU=0; nU<ctU; nU++)
{
for (int nV=0; nV<ctV; nV++)
{
rattPatch->getUIPatch (i).getTileDesc (nU+nV*ctU)=rpatch.getTileDesc (ctU-1-nU+(ctV-1-nV)*ctU);
}
}
for (nU=0; nU<ctU+1; nU++)
{
for (int nV=0; nV<ctV+1; nV++)
{
rattPatch->getUIPatch (i).setColor (nU+nV*(ctU+1), rpatch.getColor (ctU-nU+(ctV-nV)*ctU));
}
}
}
// Re-order vertices
ct = attPatch->patches[i].type == PATCH_QUAD ? 4 : 3;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].v[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].v[j] = v[ct - j - 1];
}
// Re-order vecs
ct = attPatch->patches[i].type == PATCH_QUAD ? 8 : 6;
ct2 = attPatch->patches[i].type == PATCH_QUAD ? 5 : 3;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].vec[j];
}
for (j = 0; j < ct; j++, ct2--)
{
if (ct2 < 0)
ct2 = ct - 1;
attPatch->patches[i].vec[j] = v[ct2];
}
// Re-order enteriors
if (attPatch->patches[i].type == PATCH_QUAD)
{
ct = 4;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->patches[i].interior[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].interior[j] = v[ct - j - 1];
}
}
// Re-order aux
if (attPatch->patches[i].type == PATCH_TRI)
{
ct = 9;
for (j = 0; j < ct; j++)
{
p[j] = attPatch->patches[i].aux[j];
}
for (j = 0; j < ct; j++)
{
attPatch->patches[i].aux[j] = p[ct - j - 1];
}
}
// Re-order TV faces if present
for (int chan = 0; chan < patch->getNumMaps(); ++chan)
{
if (attPatch->tvPatches[chan])
{
ct = 4;
for (j = 0; j < ct; j++)
{
v[j] = attPatch->tvPatches[chan][i].tv[j];
}
for (j = 0; j < ct; j++)
{
attPatch->tvPatches[chan][i].tv[j] = v[ct - j - 1];
}
}
}
}
}
int i;
for (i = 0; i < attPatch->numVerts; ++i)
attPatch->verts[i].p = attPatch->verts[i].p * attMat;
for (i = 0; i < attPatch->numVecs; ++i)
attPatch->vecs[i].p = attPatch->vecs[i].p * attMat;
attPatch->computeInteriors();
theHold.Begin();
// Combine the materials of the two nodes.
int mat2Offset = 0;
Mtl *m1 = nodes[0]->GetMtl();
Mtl *m2 = node->GetMtl();
bool condenseMe = FALSE;
if (m1 && m2 &&(m1 != m2))
{
if (attachMat == ATTACHMAT_IDTOMAT)
{
int ct = 1;
if (m1->IsMultiMtl())
ct = m1->NumSubMtls();
for (int i = 0; i < patch->numPatches; ++i)
{
int mtid = patch->getPatchMtlIndex(i);
if (mtid >= ct)
patch->setPatchMtlIndex(i, mtid % ct);
}
FitPatchIDsToMaterial(*attPatch, m2);
if (condenseMat)
condenseMe = TRUE;
}
// the theHold calls here were a vain attempt to make this all undoable.
// This should be revisited in the future so we don't have to use the SYSSET_CLEAR_UNDO.
theHold.Suspend();
if (attachMat == ATTACHMAT_MATTOID)
{
m1 = FitMaterialToPatchIDs(*patch, m1);
m2 = FitMaterialToPatchIDs(*attPatch, m2);
}
Mtl *multi = CombineMaterials(m1, m2, mat2Offset);
if (attachMat == ATTACHMAT_NEITHER)
mat2Offset = 0;
theHold.Resume();
// We can't be in face subobject mode, else we screw up the materials:
DWORD oldSL = patch->selLevel;
DWORD roldSL = patch->selLevel;
patch->selLevel = PATCH_OBJECT;
rpatch->SetSelLevel (EP_OBJECT);
nodes[0]->SetMtl(multi);
patch->selLevel = oldSL;
rpatch->SetSelLevel (roldSL);
m1 = multi;
canUndo = FALSE; // Absolutely cannot undo material combinations.
}
if (!m1 && m2)
{
// We can't be in face subobject mode, else we screw up the materials:
DWORD oldSL = patch->selLevel;
DWORD roldSL = rpatch->GetSelLevel();
patch->selLevel = PATCH_OBJECT;
rpatch->SetSelLevel (EP_OBJECT);
nodes[0]->SetMtl(m2);
patch->selLevel = oldSL;
rpatch->SetSelLevel (roldSL);
m1 = m2;
}
// Start a restore object...
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "DoAttach"));
// Do the attach
patch->Attach(attPatch, mat2Offset);
rpatch->Attach(rattPatch, *patch);
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO | PART_GEOM);
// Get rid of the original node
ip->DeleteNode(node);
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_ATTACH));
if (m1 && condenseMe)
{
// Following clears undo stack.
patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
m1 = CondenseMatAssignments(*patch, m1);
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO | PART_GEOM, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
return 1;
}
void EditPatchMod::DoAddHook(PatchMesh *pMesh, int vert0, int vert1, int vert2, int seg, int config)
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
BOOL holdNeeded = FALSE;
BOOL hadSelected = FALSE;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
if (mcList.Count() != 1)
return;
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
// RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
BOOL altered = FALSE;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if ((!patch) ||(patch != pMesh))
continue;
// patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
// if(patch->vertSel.NumberSet()) {
altered = holdNeeded = TRUE;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch));
// Call the vertex type change function
// ** Hulud bug hack for hooking my way \\\\\\\\\///////////
//patch->AddHook(vert1, seg);
// Config 0
switch (config)
{
case 0:
rpatch->AddHook (vert1, seg, *patch);
break;
case 1:
rpatch->AddHook (vert0, vert1, vert2, seg, *patch);
break;
default:
nlassert (0);
}
// ** //////////\\\\\\\\\\
// patch->UpdateHooks();
// InvalidateMesh();
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
// }
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
if (holdNeeded)
{
// ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_PATCHCHANGE));
}
else
{
ip->DisplayTempPrompt(GetString(IDS_TH_NOPATCHESSEL), PROMPT_TIME);
theHold.End();
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
/* // If any bits are set in the selection set, let's DO IT!!
if (!ip)
return;
theHold.Begin();
POPatchGenRecord *rec = new POPatchGenRecord(this);
if (theHold.Holding())
theHold.Put(new PatchObjectRestore(this, rec));
// Call the patch type change function
patch.AddHook();
patch.InvalidateGeomCache();
InvalidateMesh();
theHold.Accept(GetResString(IDS_TH_PATCHCHANGE));
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
*/
}
void EditPatchMod::DoRemoveHook()
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
BOOL holdNeeded = FALSE;
BOOL hadSelected = FALSE;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
BOOL altered = FALSE;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
if (patch->vertSel.NumberSet())
{
altered = holdNeeded = TRUE;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch));
// Call the vertex type change function
// Modif by Hulud
//patch->RemoveHook();
rpatch->RemoveHook (*patch);
// patch->InvalidateGeomCache();
// InvalidateMesh();
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
}
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
if (holdNeeded)
{
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_PATCHCHANGE));
}
else
{
ip->DisplayTempPrompt(GetString(IDS_TH_NOPATCHESSEL), PROMPT_TIME);
theHold.End();
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
}
// Edger Delete modifier method
void EditPatchMod::DoEdgeDelete()
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
int holdNeeded = 0;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
int altered = 0;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
if (patch->edgeSel.NumberSet())
{
altered = holdNeeded = 1;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "DoEdgeDelete"));
int edges = patch->getNumEdges();
int patches = patch->getNumPatches();
int verts = patch->getNumVerts();
// Tag the patches that are attached to selected edges
BitArray delPatches(patches);
delPatches.ClearAll();
for (int i = 0; i < edges; ++i)
{
if (patch->edgeSel[i])
{
#if (MAX_RELEASE < 4000)
if (patch->edges[i].patch1 >= 0)
delPatches.Set(patch->edges[i].patch1);
if (patch->edges[i].patch2 >= 0)
delPatches.Set(patch->edges[i].patch2);
#else // (MAX_RELEASE < 4000)
if (patch->edges[i].patches[0] >= 0)
delPatches.Set(patch->edges[i].patches[0]);
if (patch->edges[i].patches[1] >= 0)
delPatches.Set(patch->edges[i].patches[1]);
#endif // (MAX_RELEASE < 4000)
}
}
BitArray delVerts(verts);
delVerts.ClearAll();
DeletePatchParts(patch, rpatch, delVerts, delPatches);
patch->computeInteriors();
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
}
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
if (holdNeeded)
{
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_EDGEDELETE));
}
else
{
ip->DisplayTempPrompt(GetString(IDS_TH_NOEDGESSEL), PROMPT_TIME);
theHold.End();
}
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_TOPO, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
}
void EditPatchMod::UpdateSelectDisplay()
{
TSTR buf;
int num, j;
if (!hSelectPanel)
return;
ModContextList mcList;
INodeTab nodes;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
switch (GetSubobjectLevel())
{
case EP_OBJECT:
buf.printf(GetString(IDS_TH_OBJECT_SEL));
break;
case EP_VERTEX:
{
num = 0;
PatchMesh *thePatch = NULL;
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
int thisNum = patch->vertSel.NumberSet();
if (thisNum)
{
num += thisNum;
thePatch = patch;
}
}
}
if (num == 1)
{
for (j = 0; j < thePatch->vertSel.GetSize(); j++)
if (thePatch->vertSel[j])
break;
buf.printf(GetString(IDS_TH_NUMVERTSEL), j + 1);
}
else
buf.printf(GetString(IDS_TH_NUMVERTSELP), num);
}
break;
case EP_PATCH:
{
num = 0;
PatchMesh *thePatch = NULL;
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
int thisNum = patch->patchSel.NumberSet();
if (thisNum)
{
num += thisNum;
thePatch = patch;
}
}
}
if (num == 1)
{
for (j = 0; j < thePatch->patchSel.GetSize(); j++)
if (thePatch->patchSel[j])
break;
buf.printf(GetString(IDS_TH_NUMPATCHSEL), j + 1);
}
else
buf.printf(GetString(IDS_TH_NUMPATCHSELP), num);
}
break;
case EP_EDGE:
{
num = 0;
PatchMesh *thePatch = NULL;
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
int thisNum = patch->edgeSel.NumberSet();
if (thisNum)
{
num += thisNum;
thePatch = patch;
}
}
}
if (num == 1)
{
for (j = 0; j < thePatch->edgeSel.GetSize(); j++)
if (thePatch->edgeSel[j])
break;
buf.printf(GetString(IDS_TH_NUMEDGESEL), j + 1);
}
else
buf.printf(GetString(IDS_TH_NUMEDGESELP), num);
}
break;
case EP_TILE:
{
num = 0;
RPatchMesh *thePatch = NULL;
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->tempData && patchData->TempData(this)->PatchCached(ip->GetTime()))
{
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(ip->GetTime(), rpatch);
if (!patch)
continue;
int thisNum = rpatch->tileSel.NumberSet();
if (thisNum)
{
num += thisNum;
thePatch = rpatch;
}
}
}
if (num == 1)
{
for (j = 0; j < thePatch->tileSel.GetSize(); j++)
if (thePatch->tileSel[j])
break;
buf.printf("Tile %d Selected", j + 1);
}
else
buf.printf("%d Tiles Selected", num);
}
break;
}
nodes.DisposeTemporary();
SetDlgItemText(hSelectPanel, IDC_NUMSEL_LABEL, buf);
}
void EditPatchMod::SelectionChanged()
{
if (hSelectPanel)
{
UpdateSelectDisplay();
InvalidateRect(hSelectPanel, NULL, FALSE);
}
// Now see if the selection set matches one of the named selections!
if (ip &&(selLevel != EP_OBJECT)&&(selLevel != EP_TILE))
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
ip->GetModContexts(mcList, nodes);
int sublevel = selLevel - 1;
int dataSet;
for (int set = 0; set < namedSel[sublevel].Count(); ++set)
{
ClearPatchDataFlag(mcList, EPD_BEENDONE);
BOOL gotMatch = FALSE;
for (int i = 0; i < mcList.Count(); i++)
{
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
// See if this patch has the named selection set
switch (selLevel)
{
case EP_VERTEX:
for (dataSet = 0; dataSet < patchData->vselSet.Count(); ++dataSet)
{
if (*(patchData->vselSet.names[dataSet]) == *namedSel[sublevel][set])
{
if (!(*patchData->vselSet.sets[set] == patch->vertSel))
goto next_set;
gotMatch = TRUE;
break;
}
}
break;
case EP_EDGE:
for (dataSet = 0; dataSet < patchData->eselSet.Count(); ++dataSet)
{
if (*(patchData->eselSet.names[dataSet]) == *namedSel[sublevel][set])
{
if (!(*patchData->eselSet.sets[set] == patch->edgeSel))
goto next_set;
gotMatch = TRUE;
break;
}
}
break;
case EP_PATCH:
for (dataSet = 0; dataSet < patchData->pselSet.Count(); ++dataSet)
{
if (*(patchData->pselSet.names[dataSet]) == *namedSel[sublevel][set])
{
if (!(*patchData->pselSet.sets[set] == patch->patchSel))
goto next_set;
gotMatch = TRUE;
break;
}
}
break;
}
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
// If we reach here, we might have a set that matches
if (gotMatch)
{
ip->SetCurNamedSelSet(*namedSel[sublevel][set]);
goto namedSelUpdated;
}
next_set:;
}
// No set matches, clear the named selection
ip->ClearCurNamedSelSet();
namedSelUpdated:
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
}
}
void EditPatchMod::DoVertReset ()
{
ModContextList mcList;
INodeTab nodes;
TimeValue t = ip->GetTime();
int holdNeeded = 0;
BOOL hadSel = FALSE;
if (!ip)
return;
ip->GetModContexts(mcList, nodes);
ClearPatchDataFlag(mcList, EPD_BEENDONE);
theHold.Begin();
RecordTopologyTags();
for (int i = 0; i < mcList.Count(); i++)
{
BOOL altered = FALSE;
EditPatchData *patchData =(EditPatchData*)mcList[i]->localData;
if (!patchData)
continue;
if (patchData->GetFlag(EPD_BEENDONE))
continue;
// If the mesh isn't yet cache, this will cause it to get cached.
RPatchMesh *rpatch;
PatchMesh *patch = patchData->TempData(this)->GetPatch(t, rpatch);
if (!patch)
continue;
patchData->RecordTopologyTags(patch);
// If this is the first edit, then the delta arrays will be allocated
patchData->BeginEdit(t);
// If any bits are set in the selection set, let's DO IT!!
if (patch->vertSel.NumberSet() > 0)
{
hadSel = TRUE;
if (theHold.Holding())
theHold.Put(new PatchRestore(patchData, this, patch, rpatch, "DoVertReset"));
// Call the patch weld function
ResetVert (patch);
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_GEOM);
/*if (patch->Weld(weldThreshold))
{
rpatch->Weld (patch);
altered = holdNeeded = TRUE;
patchData->UpdateChanges(patch, rpatch);
patchData->TempData(this)->Invalidate(PART_TOPO);
}*/
}
patchData->SetFlag(EPD_BEENDONE, TRUE);
}
ResolveTopoChanges();
theHold.Accept("Reset Vertex");
/*if (holdNeeded)
{
ResolveTopoChanges();
theHold.Accept(GetString(IDS_TH_VERTWELD));
}
else
{
if (!hadSel)
ip->DisplayTempPrompt(GetString(IDS_TH_NOVERTSSEL), PROMPT_TIME);
else
ip->DisplayTempPrompt(GetString(IDS_TH_NOWELDPERFORMED), PROMPT_TIME);
theHold.End();
}*/
nodes.DisposeTemporary();
ClearPatchDataFlag(mcList, EPD_BEENDONE);
NotifyDependents(FOREVER, PART_GEOM, REFMSG_CHANGE);
ip->RedrawViews(ip->GetTime(), REDRAW_NORMAL);
}
void MaterialUIHandler::UpdateCurrentMaterial (HWND hWnd, EPolyMod *pMod, TimeValue t, Interval & validity)
{
MtlID mat = 0;
bool determined = false;
if (pMod->GetPolyOperationID() == ep_op_set_material)
{
int materialHolder;
pMod->getParamBlock()->GetValue (epm_material, t, materialHolder, validity);
mat = materialHolder;
determined = true;
}
else
{
bool useStackSelection = pMod->getParamBlock()->GetInt (epm_stack_selection) != 0;
bool init = false;
ModContextList list;
INodeTab nodes;
pMod->EpModGetIP()->GetModContexts (list, nodes);
int i;
for (i=0; i<list.Count(); i++)
{
EditPolyData *pData = (EditPolyData *) list[i]->localData;
if (!pData) continue;
MNMesh *pMesh = pData->GetMesh();
if (!pMesh) {
validity = NEVER;
continue;
}
DWORD l_selFlag = useStackSelection ? MN_EDITPOLY_STACK_SELECT:MN_SEL;
int j;
for (j=0; j<pMesh->numf; j++)
{
if (!pMesh->f[j].GetFlag (l_selFlag))
continue;
if (pMesh->f[j].GetFlag (MN_DEAD))
continue;
if (!init)
{
mat = pMesh->f[j].material;
init = true;
}
else if (mat != pMesh->f[j].material) break;
}
if (j<pMesh->numf) break;
}
nodes.DisposeTemporary ();
determined = (i>=list.Count()) && init;
}
ISpinnerControl *spin = GetISpinner(GetDlgItem(hWnd,IDC_MAT_IDSPIN));
spin->SetIndeterminate(!determined);
if (determined) spin->SetValue (int(mat+1), FALSE);
ReleaseISpinner(spin);
spin = GetISpinner(GetDlgItem(hWnd,IDC_MAT_IDSPIN_SEL));
spin->SetIndeterminate(!determined);
if (determined) spin->SetValue (int(mat+1), FALSE);
ReleaseISpinner(spin);
if (GetDlgItem (hWnd, IDC_MTLID_NAMES_COMBO)) {
ValidateUINameCombo(hWnd, pMod);
}
}