/*-----------------------------------------------------------------------------*
* This routine queues an SRB to reset the SCSI Bus
*
*-----------------------------------------------------------------------------*/
void Sym8xxSCSIController::resetCommand( IOSCSIParallelCommand *scsiCommand )
{
SRB * srb;
IOMemoryDescriptor * iomd;
// printf( "SCSI(Symbios8xx): resetCommand\n\r" );
srb = (SRB *) scsiCommand->getCommandData();
bzero( srb, sizeof(SRB) );
iomd = SCSI_IOMDs[ SCSI_RESET_IOMD ]; // special "target" for reset
srb->srbIOMD = iomd; // save in SRB for later ->complete() call
// ::initWithAddress() causes any previous contents of IOMD to be ::complete()'d
if ( iomd->initWithAddress( srb, sizeof( SRB ), kIODirectionOutIn ) )
{
iomd->prepare();
srb->srbPhys = (SRB *) iomd->getPhysicalAddress();
}
else
{
// this should never happen, as we have allocated enough
// IOMDs for MAX_SCSI_TARGETS plus 2 extra for reset and
// a "fudge factor" just in case.
panic( "Sym8xxSCSIController::resetCommand - IOMemoryDescriptor reinitialization failed" );
}
srb->scsiCommand = scsiCommand;
Sym8xxSCSIBusReset( srb );
}
void IOVideoSampleStream::postFreeInputBuffer(UInt64 vbiTime, UInt64 outputTime, UInt64 totalFrameCount, UInt64 droppedFrameCount,UInt64 lastDisplayedSequenceNumber)
{
IOStreamBuffer* buf = OSDynamicCast(IOStreamBuffer, _freeBuffers->getObject(0));
if (NULL == buf)
{
USBLog(1, "IOVideoSampleStream::postFreeInputBuffer - no free buffers\n");
if ((getOutputQueue())->entryCount > 0)
{
//all the free buffers are in the queue already so just alert the host
(void) sendOutputNotification();
}
return;
}
_freeBuffers->removeObject(0);
IOMemoryDescriptor *ctrlDescriptor = OSDynamicCast(IOMemoryDescriptor, buf->getControlBuffer());
if (NULL != ctrlDescriptor)
{
USBLog(1, "IOVideoSampleStream got control buffer descriptor\n");
SampleVideoDeviceControlBuffer theBuffControl, readBackControl;
USBLog(1, "IOVideoSampleStream::postFreeInputBuffer - passed in vbiTime = %lld outputTime = %lld framecount = %lld droppedframecount = %lld lastDisplayedSequenceNumber = %lld \n", vbiTime, outputTime, totalFrameCount, droppedFrameCount, lastDisplayedSequenceNumber);
theBuffControl.vbiTime = vbiTime;
theBuffControl.outputTime = outputTime;
theBuffControl.totalFrameCount = totalFrameCount;
theBuffControl.droppedFrameCount = droppedFrameCount;
theBuffControl.firstVBITime = 0;
theBuffControl.sequenceNumber = lastDisplayedSequenceNumber;
theBuffControl.discontinuityFlags = 0;
(void) ctrlDescriptor->prepare();
ctrlDescriptor->writeBytes(0, &theBuffControl, buf->getControlBuffer()->getLength());
ctrlDescriptor->readBytes(0, &readBackControl, buf->getControlBuffer()->getLength());
USBLog(1, "IOVideoSampleStream::postFreeInputBuffer - control buffer info vbiTime = %lld outputTime = %lld framecount = %lld droppedframecount = %lld sequencenumber = %lld\n", readBackControl.vbiTime, readBackControl.outputTime, readBackControl.totalFrameCount, readBackControl.droppedFrameCount,readBackControl.sequenceNumber);
(void) ctrlDescriptor->complete();
}
IOReturn result = enqueueOutputBuffer(buf, 0, buf->getDataBuffer()->getLength(), 0, buf->getControlBuffer()->getLength());
if (result != kIOReturnSuccess)
{
USBLog(1, "IOVideoSampleStream::postFreeInputBuffer help enqueueOutputBuffer failed! (%x)\n", result);
return;
}
result = sendOutputNotification();
if (result != kIOReturnSuccess)
{
USBLog(1, "IOVideoSampleStream::postFreeInputBuffer help sendOutputNotification failed! (%x)\n", result);
return;
}
}
int st_readwrite(dev_t dev, struct uio *uio, int ioflag)
{
IOSCSITape *st = IOSCSITape::devices[minor(dev)];
IOMemoryDescriptor *dataBuffer = IOMemoryDescriptorFromUIO(uio);
int status = ENOSYS;
IOReturn opStatus = kIOReturnError;
int lastRealizedBytes = 0;
if (dataBuffer == 0)
return ENOMEM;
dataBuffer->prepare();
opStatus = st->ReadWrite(dataBuffer, &lastRealizedBytes);
dataBuffer->complete();
dataBuffer->release();
if (opStatus == kIOReturnSuccess)
{
uio_setresid(uio, uio_resid(uio) - lastRealizedBytes);
if (st->blkno != -1)
{
if (st->IsFixedBlockSize())
st->blkno += (lastRealizedBytes / st->blksize);
else
st->blkno++;
}
status = KERN_SUCCESS;
}
else if (st->sense_flags & SENSE_FILEMARK)
{
if (st->fileno != -1)
{
st->fileno++;
st->blkno = 0;
}
status = KERN_SUCCESS;
}
return status;
}
bool
IOFWUserLocalIsochPort::initWithUserDCLProgram (
AllocateParams * params,
IOFireWireUserClient & userclient,
IOFireWireController & controller )
{
// sanity checking
if ( params->programExportBytes == 0 )
{
ErrorLog ( "No program!" ) ;
return false ;
}
fLock = IORecursiveLockAlloc () ;
if ( ! fLock )
{
ErrorLog ( "Couldn't allocate recursive lock\n" ) ;
return false ;
}
// init easy params
fUserObj = params->userObj ;
fUserClient = & userclient ;
fDCLPool = NULL ;
fProgramCount = 0;
fStarted = false ;
IOReturn error = kIOReturnSuccess ;
// get user program ranges:
IOAddressRange * bufferRanges = new IOAddressRange[ params->bufferRangeCount ] ;
if ( !bufferRanges )
{
error = kIOReturnNoMemory ;
}
if ( !error )
{
error = fUserClient->copyUserData(params->bufferRanges,(mach_vm_address_t)bufferRanges, sizeof ( IOAddressRange ) * params->bufferRangeCount ) ;
}
// create descriptor for program buffers
IOMemoryDescriptor * bufferDesc = NULL ;
if ( ! error )
{
IOByteCount length = 0 ;
for ( unsigned index = 0; index < params->bufferRangeCount; ++index )
{
length += bufferRanges[ index ].length ;
}
bufferDesc = IOMemoryDescriptor::withAddressRanges ( bufferRanges, params->bufferRangeCount, kIODirectionOutIn,
fUserClient->getOwningTask() ) ;
if ( ! bufferDesc )
{
error = kIOReturnNoMemory ;
}
else
{
// IOLog( "IOFWUserLocalIsochPort::initWithUserDCLProgram - checkMemoryInRange status 0x%08lx\n", checkMemoryInRange( bufferDesc, 0x000000001FFFFFFF ) );
error = bufferDesc->prepare( kIODirectionPrepareToPhys32 ) ;
FWTrace( kFWTIsoch, kTPIsochPortUserInitWithUserDCLProgram, (uintptr_t)(fUserClient->getOwner()->getController()->getLink()), error, length, 0 );
// IOLog( "IOFWUserLocalIsochPort::initWithUserDCLProgram - prep 32 checkMemoryInRange status 0x%08lx\n", checkMemoryInRange( bufferDesc, 0x000000001FFFFFFF ) );
}
}
// create map for buffers; we will need to get a virtual address for them
IOMemoryMap * bufferMap = NULL ;
if ( !error )
{
bufferMap = bufferDesc->map() ;
if ( !bufferMap )
{
DebugLog( "Couldn't map program buffers\n" ) ;
error = kIOReturnVMError ;
}
bufferDesc->release() ;
}
IOMemoryDescriptor * userProgramExportDesc = NULL ;
if ( !error )
{
userProgramExportDesc = IOMemoryDescriptor::withAddressRange(
params->programData,
params->programExportBytes,
kIODirectionOut,
fUserClient->getOwningTask() ) ;
}
// get map of program export data
if ( userProgramExportDesc )
{
error = userProgramExportDesc->prepare() ;
}
if ( !error )
{
DCLCommand * opcodes = NULL ;
switch ( params->version )
{
case kDCLExportDataLegacyVersion :
error = importUserProgram( userProgramExportDesc, params->bufferRangeCount, bufferRanges, bufferMap ) ;
ErrorLogCond( error, "importUserProgram returned %x\n", error ) ;
if ( ! error )
{
opcodes = (DCLCommand*)fProgramBuffer ;
}
break ;
case kDCLExportDataNuDCLRosettaVersion :
fDCLPool = fUserClient->getOwner()->getBus()->createDCLPool() ;
if ( ! fDCLPool )
{
error = kIOReturnNoMemory ;
}
if ( !error )
{
error = fDCLPool->importUserProgram( userProgramExportDesc, params->bufferRangeCount, bufferRanges, bufferMap ) ;
}
fProgramBuffer = new UInt8[ sizeof( DCLNuDCLLeader ) ] ;
{
DCLNuDCLLeader * leader = (DCLNuDCLLeader*)fProgramBuffer ;
{
leader->pNextDCLCommand = NULL ; // unused - always NULL
leader->opcode = kDCLNuDCLLeaderOp ;
leader->program = fDCLPool ;
}
opcodes = (DCLCommand*)leader ;
}
break ;
default :
ErrorLog ( "unsupported DCL program type\n" ) ;
error = kIOReturnBadArgument ;
break ;
}
ErrorLogCond( !opcodes, "Couldn't get opcodes\n" ) ;
IODCLProgram * program = NULL ;
if ( opcodes )
{
// IOFWLocalIsochPort::printDCLProgram( opcodes ) ;
IOFireWireBus::DCLTaskInfoAux infoAux ;
{
infoAux.version = 2 ;
infoAux.u.v2.bufferMemoryMap = bufferMap ;
infoAux.u.v2.workloop = params->options & kFWIsochPortUseSeparateKernelThread ? createRealtimeThread() : NULL ;
infoAux.u.v2.options = (IOFWIsochPortOptions)params->options ;
}
IOFireWireBus::DCLTaskInfo info = { 0, 0, 0, 0, 0, 0, & infoAux } ;
program = fUserClient->getOwner()->getController()->getLink()->createDCLProgram( params->talking,
opcodes,
& info,
params->startEvent,
params->startState,
params->startMask ) ;
bufferMap->release() ; // retained by DCL program
bufferMap = NULL ;
if ( infoAux.u.v2.workloop )
{
// If we created a custom workloop, it will be retained by the program...
// We can release our reference...
infoAux.u.v2.workloop->release() ;
}
DebugLogCond( !program, "createDCLProgram returned nil\n" ) ;
}
if ( program )
{
if ( ! super::init( program, & controller ) )
{
ErrorLog ( "IOFWUserIsochPort::init failed\n" ) ;
error = kIOReturnError ;
}
}
else
{
DebugLog ( "Couldn't create DCL program\n" ) ;
error = kIOReturnNoMemory ;
}
userProgramExportDesc->complete() ;
userProgramExportDesc->release() ;
userProgramExportDesc = NULL ;
}
delete [] bufferRanges ;
InfoLog( "-IOFWUserLocalIsochPort::initWithUserDCLProgram error=%x (build date "__TIME__" "__DATE__")\n", error ) ;
return ( ! error ) ;
}
//
// start
// when this method is called, I have been selected as the driver for this device.
// I can still return false to allow a different driver to load
//
bool
local_IOath3kfrmwr::start(IOService *provider)
{
IOReturn err;
const IOUSBConfigurationDescriptor *cd;
// Do all the work here, on an IOKit matching thread.
// 0.1 Get my USB Device
DEBUG_LOG("%s(%p)::start!\n", getName(), this);
pUsbDev = OSDynamicCast(IOUSBDevice, provider);
if(!pUsbDev)
{
DEBUG_LOG("%s(%p)::start - Provider isn't a USB device!!!\n", getName(), this);
return false;
}
// 0.2 Reset the device
err = pUsbDev->ResetDevice();
if (err)
{
DEBUG_LOG("%s(%p)::start - failed to reset the device\n", getName(), this);
pUsbDev->close(this);
return false;
} else IOLog("%s(%p)::start: device reset\n", getName(), this);
// 0.3 Find the first config/interface
int numconf = 0;
if ((numconf = pUsbDev->GetNumConfigurations()) < 1)
{
DEBUG_LOG("%s(%p)::start - no composite configurations\n", getName(), this);
return false;
} else DEBUG_LOG("%s(%p)::start: num configurations %d\n", getName(), this, numconf);
cd = pUsbDev->GetFullConfigurationDescriptor(0);
// Set the configuration to the first config
if (!cd)
{
DEBUG_LOG("%s(%p)::start - no config descriptor\n", getName(), this);
return false;
}
// 1.0 Open the USB device
if (!pUsbDev->open(this))
{
DEBUG_LOG("%s(%p)::start - unable to open device for configuration\n", getName(), this);
return false;
}
// 1.1 Set the configuration to the first config
err = pUsbDev->SetConfiguration(this, cd->bConfigurationValue, true);
if (err)
{
DEBUG_LOG("%s(%p)::start - unable to set the configuration\n", getName(), this);
pUsbDev->close(this);
return false;
}
DEBUG_LOG("%s(%p)::start - UPLOADED - %c\n", getName(), this,uploaded);
//Uploading only one time
if (!uploaded) {
// 1.2 Get the status of the USB device (optional, for diag.)
USBStatus status;
err = pUsbDev->GetDeviceStatus(&status);
if (err)
{
DEBUG_LOG("%s(%p)::start - unable to get device status\n", getName(), this);
pUsbDev->close(this);
return false;
} else IOLog("%s(%p)::start: device status %d\n", getName(), this, (int)status);
// 2.0 Find the interface for bulk endpoint transfers
IOUSBFindInterfaceRequest request;
request.bInterfaceClass = kIOUSBFindInterfaceDontCare;
request.bInterfaceSubClass = kIOUSBFindInterfaceDontCare;
request.bInterfaceProtocol = kIOUSBFindInterfaceDontCare;
request.bAlternateSetting = kIOUSBFindInterfaceDontCare;
IOUSBInterface * intf = pUsbDev->FindNextInterface(NULL, &request);
if (!intf) {
DEBUG_LOG("%s(%p)::start - unable to find interface\n", getName(), this);
pUsbDev->close(this);
return false;
}
// 2.1 Open the interface
if (!intf->open(this))
{
DEBUG_LOG("%s(%p)::start - unable to open interface\n", getName(), this);
pUsbDev->close(this);
return false;
}
// 2.2 Get info on endpoints (optional, for diag.)
int numep = intf->GetNumEndpoints();
DEBUG_LOG("%s(%p)::start: interface has %d endpoints\n", getName(), this, numep);
UInt8 transferType = 0;
UInt16 maxPacketSize = 0;
UInt8 interval = 0;
err = intf->GetEndpointProperties(0, 0x02, kUSBOut, &transferType, &maxPacketSize, &interval);
if (err) {
DEBUG_LOG("%s(%p)::start - failed to get endpoint 2 properties\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
} else DEBUG_LOG("%s(%p)::start: EP2 %d %d %d\n", getName(), this, transferType, maxPacketSize, interval);
err = intf->GetEndpointProperties(0, 0x01, kUSBIn, &transferType, &maxPacketSize, &interval);
if (err) {
DEBUG_LOG("%s(%p)::start - failed to get endpoint 1 properties\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
} else {DEBUG_LOG("%s(%p)::start: EP1 %d %d %d\n", getName(), this, transferType, maxPacketSize, interval);
}
// 2.3 Get the pipe for bulk endpoint 2 Out
IOUSBPipe * pipe = intf->GetPipeObj(0x02);
if (!pipe) {
DEBUG_LOG("%s(%p)::start - failed to find bulk out pipe\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
/* // TODO: Test the alternative way to do it:
IOUSBFindEndpointRequest pipereq;
pipereq.type = kUSBBulk;
pipereq.direction = kUSBOut;
pipereq.maxPacketSize = BULK_SIZE;
pipereq.interval = 0;
IOUSBPipe *pipe = intf->FindNextPipe(NULL, &pipereq);
pipe = intf->FindNextPipe(pipe, &pipereq);
if (!pipe) {
DEBUG_LOG("%s(%p)::start - failed to find bulk out pipe 2\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
*/
// 3.0 Send request to Control Endpoint to initiate the firmware transfer
IOUSBDevRequest ctlreq;
ctlreq.bmRequestType = USBmakebmRequestType(kUSBOut, kUSBVendor, kUSBDevice);
ctlreq.bRequest = USB_REQ_DFU_DNLOAD;
ctlreq.wValue = 0;
ctlreq.wIndex = 0;
ctlreq.wLength = 20;
ctlreq.pData = firmware_buf;
#if 0 // Trying to troubleshoot the problem after Restart (with OSBundleRequired Root)
for (int irep = 0; irep < 5; irep++) { // retry on error
err = pUsbDev->DeviceRequest(&ctlreq); // (synchronous, will block)
if (err)
DEBUG_LOG("%s(%p)::start - failed to initiate firmware transfer (%d), retrying (%d)\n", getName(), this, err, irep+1);
else
break;
}
#else
err = pUsbDev->DeviceRequest(&ctlreq); // (synchronous, will block)
#endif
if (err) {
DEBUG_LOG("%s(%p)::start - failed to initiate firmware transfer (%d)\n", getName(), this, err);
intf->close(this);
pUsbDev->close(this);
return false;
}
// 3.1 Create IOMemoryDescriptor for bulk transfers
char buftmp[BULK_SIZE];
IOMemoryDescriptor * membuf = IOMemoryDescriptor::withAddress(&buftmp, BULK_SIZE, kIODirectionNone);
if (!membuf) {
DEBUG_LOG("%s(%p)::start - failed to map memory descriptor\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
err = membuf->prepare();
if (err) {
DEBUG_LOG("%s(%p)::start - failed to prepare memory descriptor\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
// 3.2 Send the rest of firmware to the bulk pipe
char * buf = firmware_buf;
int size = sizeof(firmware_buf);
buf += 20;
size -= 20;
int ii = 1;
while (size) {
int to_send = size < BULK_SIZE ? size : BULK_SIZE;
memcpy(buftmp, buf, to_send);
err = pipe->Write(membuf, 10000, 10000, to_send);
if (err) {
DEBUG_LOG("%s(%p)::start - failed to write firmware to bulk pipe (%d)\n", getName(), this, ii);
intf->close(this);
pUsbDev->close(this);
return false;
}
buf += to_send;
size -= to_send;
ii++;
}
IOLog("%s(%p)::start: firmware was sent to bulk pipe\n", getName(), this);
err = membuf->complete();
if (err) {
DEBUG_LOG("%s(%p)::start - failed to complete memory descriptor\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
uploaded = false;
return false;
}
/* // TODO: Test the alternative way to do it:
IOMemoryDescriptor * membuf = IOMemoryDescriptor::withAddress(&firmware_buf[20], 246804-20, kIODirectionNone); // sizeof(firmware_buf)
if (!membuf) {
DEBUG_LOG("%s(%p)::start - failed to map memory descriptor\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
err = membuf->prepare();
if (err) {
DEBUG_LOG("%s(%p)::start - failed to prepare memory descriptor\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
//err = pipe->Write(membuf);
err = pipe->Write(membuf, 10000, 10000, 246804-20, NULL);
if (err) {
DEBUG_LOG("%s(%p)::start - failed to write firmware to bulk pipe\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
return false;
}
DEBUG_LOG("%s(%p)::start: firmware was sent to bulk pipe\n", getName(), this);
*/
// 4.0 Get device status (it fails, but somehow is important for operational device)
err = pUsbDev->GetDeviceStatus(&status);
if (err)
{
DEBUG_LOG("%s(%p)::start - unable to get device status\n", getName(), this);
intf->close(this);
pUsbDev->close(this);
DEBUG_LOG("%s(%p)::start - Firmware Uploaded State Changed to - %c\n", getName(), this,uploaded);
// Set the Upload State
uploaded = true;
return false;
} else {DEBUG_LOG("%s(%p)::start: device status %d\n", getName(), this, (int)status);
}
// Close the interface
intf->close(this);
DEBUG_LOG("%s(%p)::start - Firmware Uploaded State Changed to - %c\n", getName(), this,uploaded);
// Set the Upload State
uploaded = true;
}
else {
IOLog("%s(%p)::Firmware already uploaded\n", getName(), this);
}
// Close the USB device
pUsbDev->close(this);
return false; // return false to allow a different driver to load
}
IOReturn SamplePCIUserClientClassName::method2( SampleStructForMethod2 * structIn,
SampleResultsForMethod2 * structOut,
IOByteCount inputSize, IOByteCount * outputSize )
{
IOReturn err;
IOMemoryDescriptor * memDesc = 0;
UInt32 param1 = structIn->parameter1;
uint64_t clientAddr = structIn->data_pointer;
uint64_t size = structIn->data_length;
// Rosetta
if (fCrossEndian) {
param1 = OSSwapInt32(param1);
}
IOLog("SamplePCIUserClient::method2(" UInt32_x_FORMAT ")\n", param1);
IOLog( "fClientShared->string == \"%s\"\n", fClientShared->string );
structOut->results1 = 0x87654321;
// Rosetta
if (fCrossEndian) {
structOut->results1 = OSSwapInt64(structOut->results1);
clientAddr = OSSwapInt64(clientAddr);
size = OSSwapInt64(size);
}
do
{
#if defined(__ppc__) && (MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4)
// construct a memory descriptor for the out of line client memory
// old 32 bit API - this will fail and log a backtrace if the task is 64 bit
IOLog("The Pre-Leopard way to construct a memory descriptor\n");
memDesc = IOMemoryDescriptor::withAddress( (vm_address_t) clientAddr, (IOByteCount) size, kIODirectionNone, fTask );
if (memDesc == NULL) {
IOLog("IOMemoryDescriptor::withAddress failed\n");
err = kIOReturnVMError;
continue;
}
#else
// 64 bit API - works on all tasks, whether 64 bit or 32 bit
IOLog("The Leopard and later way to construct a memory descriptor\n");
memDesc = IOMemoryDescriptor::withAddressRange( clientAddr, size, kIODirectionNone, fTask );
if (memDesc == NULL) {
IOLog("IOMemoryDescriptor::withAddresswithAddressRange failed\n");
err = kIOReturnVMError;
continue;
}
#endif
// Wire it and make sure we can write it
err = memDesc->prepare( kIODirectionOutIn );
if (kIOReturnSuccess != err) {
IOLog("IOMemoryDescriptor::prepare failed(0x%08x)\n", err);
continue;
}
// Generate a DMA list for the client memory
err = fDriver->generateDMAAddresses(memDesc);
// Other methods to access client memory:
// readBytes/writeBytes allow programmed I/O to/from an offset in the buffer
char pioBuffer[ 200 ];
memDesc->readBytes(32, &pioBuffer, sizeof(pioBuffer));
IOLog("readBytes: \"%s\"\n", pioBuffer);
// map() will create a mapping in the kernel address space.
IOMemoryMap* memMap = memDesc->map();
if (memMap) {
char* address = (char *) memMap->getVirtualAddress();
IOLog("kernel mapped: \"%s\"\n", address + 32);
memMap->release();
} else {
IOLog("memDesc map(kernel) failed\n");
}
// this map() will create a mapping in the users (the client of this IOUserClient) address space.
#if MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4
memMap = memDesc->map(fTask, 0, kIOMapAnywhere);
#else
memMap = memDesc->createMappingInTask(fTask, 0, kIOMapAnywhere);
#endif
if (memMap) {
#if MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4
IOLog("The pre-Leopard way to construct a memory descriptor\n");
// old 32 bit API - this will truncate and log a backtrace if the task is 64 bit
IOVirtualAddress address32 = memMap->getVirtualAddress();
IOLog("user32 mapped: " VirtAddr_FORMAT "\n", address32);
#else
IOLog("The Leopard and later way to construct a memory descriptor\n");
// new 64 bit API - same for 32 bit and 64 bit client tasks
mach_vm_address_t address64 = memMap->getAddress();
IOLog("user64 mapped: 0x%016llx\n", address64);
memMap->release();
#endif
} else {
IOLog("memDesc map(user) failed\n");
}
// Done with the I/O now.
memDesc->complete( kIODirectionOutIn );
} while ( false );
if (memDesc)
memDesc->release();
return err;
}
bool RadeonController::start( IOService * provider )
{
if (!super::start(provider)) return false;
device = OSDynamicCast(IOPCIDevice, provider);
if (device == NULL) return false;
//get user options
OSBoolean *prop;
OSDictionary *dict = OSDynamicCast(OSDictionary, getProperty("UserOptions"));
bzero(&options, sizeof(UserOptions));
options.HWCursorSupport = FALSE;
options.enableGammaTable = FALSE;
options.enableOSXI2C = FALSE;
options.lowPowerMode = FALSE;
if (dict) {
prop = OSDynamicCast(OSBoolean, dict->getObject("enableHWCursor"));
if (prop) options.HWCursorSupport = prop->getValue();
prop = OSDynamicCast(OSBoolean, dict->getObject("debugMode"));
if (prop) options.debugMode = prop->getValue();
if (options.debugMode) options.HWCursorSupport = FALSE;
prop = OSDynamicCast(OSBoolean, dict->getObject("enableGammaTable"));
if (prop) options.enableGammaTable = prop->getValue();
prop = OSDynamicCast(OSBoolean, dict->getObject("lowPowerMode"));
if (prop) options.lowPowerMode = prop->getValue();
}
options.verbosity = 1;
#ifdef DEBUG
if (0 == getRegistryRoot()->getProperty("RadeonDumpReady")) {
getRegistryRoot()->setProperty("RadeonDumpReady", kOSBooleanTrue);
DumpMsg.mVerbose = 1;
DumpMsg.client = 1;
DumpMsg.mMsgBufferSize = 65535;
if (dict) {
OSNumber *optionNum;
optionNum = OSDynamicCast(OSNumber, dict->getObject("verboseLevel"));
if (optionNum) DumpMsg.mVerbose = optionNum->unsigned32BitValue();
optionNum = OSDynamicCast(OSNumber, dict->getObject("MsgBufferSize"));
if (optionNum) DumpMsg.mMsgBufferSize = max(65535, optionNum->unsigned32BitValue());
}
DumpMsg.mMsgBufferEnabled = false;
DumpMsg.mMsgBufferPos = 0;
DumpMsg.mMessageLock = IOLockAlloc();
DumpMsg.mMsgBuffer = (char *) IOMalloc(DumpMsg.mMsgBufferSize);
if (!DumpMsg.mMsgBuffer) {
IOLog("error: couldn't allocate message buffer (%ld bytes)\n", DumpMsg.mMsgBufferSize);
return false;
}
enableMsgBuffer(true);
} else DumpMsg.client += 1;
options.verbosity = DumpMsg.mVerbose;
#endif
device->setMemoryEnable(true);
IOMap = device->mapDeviceMemoryWithRegister( kIOPCIConfigBaseAddress2 );
if (IOMap == NULL) return false;
FBMap = device->mapDeviceMemoryWithRegister( kIOPCIConfigBaseAddress0 );
if (FBMap == NULL) return false;
memoryMap.MMIOBase = (pointer) IOMap->getVirtualAddress();
memoryMap.MMIOMapSize = IOMap->getLength();
memoryMap.FbBase = (pointer) FBMap->getVirtualAddress();
memoryMap.FbMapSize = FBMap->getLength();
memoryMap.FbPhysBase = (unsigned long)FBMap->getPhysicalAddress();
memoryMap.bitsPerPixel = 32;
memoryMap.bitsPerComponent = 8;
memoryMap.colorFormat = 0; //0 for non-64 bit
memoryMap.BIOSCopy = NULL;
memoryMap.BIOSLength = 0;
IOMemoryDescriptor * mem;
mem = IOMemoryDescriptor::withPhysicalAddress((IOPhysicalAddress) RHD_VBIOS_BASE, RHD_VBIOS_SIZE, kIODirectionOut);
if (mem) {
memoryMap.BIOSCopy = (unsigned char *)IOMalloc(RHD_VBIOS_SIZE);
if (memoryMap.BIOSCopy) {
mem->prepare(kIODirectionOut);
if (!(memoryMap.BIOSLength = mem->readBytes(0, memoryMap.BIOSCopy, RHD_VBIOS_SIZE))) {
LOG("Cannot read BIOS image\n");
memoryMap.BIOSLength = 0;
}
if ((unsigned int)memoryMap.BIOSLength != RHD_VBIOS_SIZE)
LOG("Read only %d of %d bytes of BIOS image\n", memoryMap.BIOSLength, RHD_VBIOS_SIZE);
mem->complete(kIODirectionOut);
}
}
if (dict) {
const char typeKey[2][8] = {"@0,TYPE", "@1,TYPE"};
const char EDIDKey[2][8] = {"@0,EDID", "@1,EDID"};
const char fixedModesKey[2][17] = {"@0,UseFixedModes", "@1,UseFixedModes"};
OSString *type;
OSData *edidData;
OSBoolean *boolData;
int i;
for (i = 0;i < 2;i++) {
type = OSDynamicCast(OSString, dict->getObject(typeKey[i]));
if (!type) continue;
edidData = OSDynamicCast(OSData, dict->getObject(EDIDKey[i]));
if (edidData == NULL) continue;
options.EDID_Block[i] = (unsigned char *)IOMalloc(edidData->getLength());
if (options.EDID_Block[i] == NULL) continue;
strncpy(options.outputTypes[i], type->getCStringNoCopy(), outputTypeLength);
bcopy(edidData->getBytesNoCopy(), options.EDID_Block[i], edidData->getLength());
options.EDID_Length[i] = edidData->getLength();
boolData = OSDynamicCast(OSBoolean, dict->getObject(fixedModesKey[i]));
if (boolData) options.UseFixedModes[i] = boolData->getValue();
}
}
xf86Screens[0] = IONew(ScrnInfoRec, 1); //using global variable, will change it later
ScrnInfoPtr pScrn = xf86Screens[0];
if (pScrn == NULL) return false;
bzero(pScrn, sizeof(ScrnInfoRec));
MAKE_REG_ENTRY(&nub, device);
pciRec.chipType = device->configRead16(kIOPCIConfigDeviceID);
pciRec.subsysVendor = device->configRead16(kIOPCIConfigSubSystemVendorID);
pciRec.subsysCard = device->configRead16(kIOPCIConfigSubSystemID);
pciRec.biosSize = 16; //RHD_VBIOS_SIZE = 1 << 16
pScrn->PciTag = &nub;
pScrn->PciInfo = &pciRec;
pScrn->options = &options;
pScrn->memPhysBase = (unsigned long)FBMap->getPhysicalAddress();
pScrn->fbOffset = 0; //scanout offset
pScrn->bitsPerPixel = 32;
pScrn->bitsPerComponent = 8;
pScrn->colorFormat = 0;
pScrn->depth = pScrn->bitsPerPixel;
pScrn->memoryMap = &memoryMap;
createNubs(provider);
setModel(device);
return true;
}
IOReturn
org_pqrs_driver_KeyRemap4MacBook_UserClient_kext::callback_synchronized_communication(const BridgeUserClientStruct* inputdata, uint64_t* outputdata)
{
IOReturn result = kIOReturnSuccess;
IOMemoryDescriptor* memorydescriptor = NULL;
if (! inputdata || ! outputdata) {
result = kIOReturnBadArgument;
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication kIOReturnBadArgument\n");
goto finish;
}
if (provider_ == NULL || isInactive()) {
// Return an error if we don't have a provider. This could happen if the user process
// called callback_synchronized_communication without calling IOServiceOpen first.
// Or, the user client could be in the process of being terminated and is thus inactive.
result = kIOReturnNotAttached;
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication kIOReturnNotAttached\n");
goto finish;
}
if (! provider_->isOpen(this)) {
// Return an error if we do not have the driver open. This could happen if the user process
// did not call callback_open before calling this function.
result = kIOReturnNotOpen;
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication kIOReturnNotOpen\n");
goto finish;
}
memorydescriptor = IOMemoryDescriptor::withAddressRange(inputdata->data, inputdata->size, kIODirectionNone, task_);
if (! memorydescriptor) {
result = kIOReturnVMError;
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication kIOReturnVMError\n");
goto finish;
}
// wire it and make sure we can write it
result = memorydescriptor->prepare(kIODirectionOutIn);
if (kIOReturnSuccess != result) {
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication IOMemoryDescriptor::prepare failed(0x%x)\n", result);
goto finish;
}
{
// this map() will create a mapping in the users (the client of this IOUserClient) address space.
IOMemoryMap* memorymap = memorydescriptor->map();
if (! memorymap) {
result = kIOReturnVMError;
IOLOG_ERROR("UserClient_kext::callback_synchronized_communication IOMemoryDescriptor::map failed\n");
} else {
mach_vm_address_t address = memorymap->getAddress();
handle_synchronized_communication(inputdata->type, inputdata->option, address, inputdata->size, outputdata);
memorymap->release();
}
}
// Done with the I/O now.
memorydescriptor->complete(kIODirectionOutIn);
finish:
if (memorydescriptor) {
memorydescriptor->release();
}
return result;
}
/*-----------------------------------------------------------------------------*
*
*-----------------------------------------------------------------------------*/
void Sym8xxSCSIController::executeCommand( IOSCSIParallelCommand *scsiCommand )
{
SRB *srb = NULL;
SCSICDBInfo scsiCDB;
SCSITargetLun targetLun;
Nexus *nexus;
Nexus *nexusPhys;
UInt32 len;
bool isWrite;
IOMemoryDescriptor * iomd;
srb = (SRB *) scsiCommand->getCommandData();
bzero( srb, sizeof(SRB) );
srb->scsiCommand = scsiCommand;
scsiCommand->getCDB( &scsiCDB );
scsiCommand->getTargetLun( &targetLun );
srb->target = targetLun.target;
srb->lun = targetLun.lun;
srb->srbCDBFlags = scsiCDB.cdbFlags;
// 1 IOMD per target, since only 1 transaction possible with current architecture
iomd = SCSI_IOMDs[(int) srb->target ];
srb->srbIOMD = iomd;
// ::initWithAddress() causes any previous IOMDs to be ::complete()'d
if ( iomd->initWithAddress( srb, sizeof( SRB ), kIODirectionOutIn ) )
{
iomd->prepare();
srb->srbPhys = (SRB *) iomd->getPhysicalAddress();
}
else
{
// this should never happen, as we have allocated enough
// IOMDs for MAX_SCSI_TARGETS plus 1 extra for reset
panic( "Sym8xxSCSIController::executeCommand - IOMemoryDescriptor reinitialization failed" );
}
/*
* Setup the Nexus struct. This part of the SRB is read/written both by the
* script and the driver.
*/
nexus = &srb->nexus;
nexusPhys = &srb->srbPhys->nexus;
nexus->targetParms.target = srb->target;
// printf( "SCSI(Symbios8xx): executeCommand: T/L = %d:%d Cmd = %08x CmdType = %d\n\r",
// targetLun.target, targetLun.lun, (int)scsiCommand, scsiCommand->getCmdType() );
switch ( scsiCommand->getCmdType() )
{
case kSCSICommandAbort:
case kSCSICommandAbortAll:
case kSCSICommandDeviceReset:
Sym8xxAbortCommand( scsiCommand );
return;
default:
;
}
/*
* Set client data buffer pointers in the SRB
*/
scsiCommand->getPointers( &srb->xferDesc, &srb->xferCount, &isWrite );
srb->directionMask = (isWrite) ? 0x00000000 :0x01000000;
nexus->cdb.ppData = OSSwapHostToLittleInt32((UInt32)&nexusPhys->cdbData);
len = scsiCDB.cdbLength;
nexus->cdb.length = OSSwapHostToLittleInt32( len );
// implicit copying of arrays is not desireable. explicitly spell out what is being copied
// [rdar://problem/4092008]
// nexus->cdbData = scsiCDB.cdb;
bcopy( &scsiCDB.cdb, &nexus->cdbData, sizeof( nexus->cdbData ) );
Sym8xxCalcMsgs( scsiCommand );
/*
* Setup initial data transfer list (SGList)
*/
nexus->ppSGList = (SGEntry *)OSSwapHostToLittleInt32((UInt32)&nexusPhys->sgListData[2]);
Sym8xxUpdateSGList( srb );
Sym8xxStartSRB( srb );
}
IOReturn
IrDAUserClient::getIrDALog(void *pIn, void *pOut, IOByteCount inputSize, IOByteCount *outPutSize)
{
#if (hasTracing > 0)
IOMemoryDescriptor *md; // make a memory descriptor for the client's big buffer
unsigned char *input = (unsigned char *)pIn;
mach_vm_address_t bigaddr;
IOByteCount biglen;
IrDALogInfo *info;
require(inputSize == 9, Fail);
require(outPutSize, Fail);
require(*outPutSize == sizeof(IrDALogInfo), Fail);
//bigaddr = input[1] << 24 | input[2] << 16 | input[3] << 8 | input[4];
//biglen = input[5] << 24 | input[6] << 16 | input[7] << 8 | input[8];
bcopy(&input[1], &bigaddr, sizeof(bigaddr));
bcopy(&input[5], &biglen, sizeof(biglen));
//IOLog("biglen is %d\n", biglen);
// create and init the memory descriptor
//md = IOMemoryDescriptor::withAddress(bigaddr, biglen, kIODirectionOutIn, fTask); // REVIEW direction
//use withAddressRange() and prepare() instead
md = IOMemoryDescriptor::withAddressRange(bigaddr, biglen, kIODirectionOutIn, fTask); // REVIEW direction
md->prepare(kIODirectionOutIn);
require(md, Fail);
info = IrDALogGetInfo(); // get the info block
//ELG(info->hdr, info->hdrSize, 'irda', "info hdr");
//ELG(info->eventLog, info->eventLogSize, 'irda', "info events");
//ELG(info->msgBuffer, info->msgBufferSize, 'irda', "info msg buf");
bcopy(info, pOut, sizeof(*info)); // copy the info record back to the client
*outPutSize = sizeof(*info); // set the output size (nop, it already is)
// copy the buffer over now if there is room
if (biglen >= info->hdrSize + info->eventLogSize + info->msgBufferSize) {
IOByteCount ct;
IOReturn rc;
rc = md->prepare(kIODirectionNone);
if (rc) {ELG(-1, rc, 'irda', "prepare failed"); }
ct = md->writeBytes(0, info->hdr, info->hdrSize);
if (ct != info->hdrSize) ELG(-1, rc, 'irda', "write of hdr failed");
ct = md->writeBytes(info->hdrSize, info->eventLog, info->eventLogSize);
if (ct != info->eventLogSize) ELG(-1, rc, 'irda', "write of events failed");
ct = md->writeBytes(info->hdrSize+info->eventLogSize, info->msgBuffer, info->msgBufferSize);
if (ct != info->msgBufferSize) ELG(-1, rc, 'irda', "write of msgs failed");
ELG(0, info->hdrSize+info->eventLogSize, 'irda', "wrote msgs at offset");
rc = md->complete(kIODirectionNone);
if (!rc) { ELG(0, 0, 'irda', "complete worked"); }
else { ELG(-1, rc, 'irda', "complete failed"); }
// todo check return code of above before resetting the buffer
IrDALogReset(); // reset the buffer now
}
md->release(); // free it
return kIOReturnSuccess;
Fail:
#endif // hasTracing > 0
return kIOReturnBadArgument;
}
SCSIServiceResponse
com_apple_dts_SCSIEmulatorAdapter::ProcessParallelTask ( SCSIParallelTaskIdentifier parallelRequest )
{
// Not all of these may be required. Unused ones are commented out to avoid compiler warnings
SCSITargetIdentifier targetID = GetTargetIdentifier(parallelRequest);
// SCSITaskIdentifier task = GetSCSITaskIdentifier(parallelRequest);
// SCSITaggedTaskIdentifier taggedTask = GetTaggedTaskIdentifier(parallelRequest);
SCSILogicalUnitNumber lun = GetLogicalUnitNumber(parallelRequest);
// SCSITaskAttribute taskAttribute = GetTaskAttribute(parallelRequest);
UInt8 transferDir = GetDataTransferDirection(parallelRequest);
UInt64 transferSize = GetRequestedDataTransferCount(parallelRequest);
IOMemoryDescriptor * transferMemDesc = GetDataBuffer(parallelRequest);
// UInt64 transferMemDescOffset = GetDataBufferOffset(parallelRequest);
// Get the CDB
UInt8 cdbLength = GetCommandDescriptorBlockSize(parallelRequest);
SCSICommandDescriptorBlock cdbData;
SCSITaskStatus scsiStatus = kSCSITaskStatus_GOOD;
UInt64 dataLen = 0;
UInt8 senseBuffer[kSenseBufferLen];
UInt64 senseBufferLen = sizeof(senseBuffer);
com_apple_dts_SCSIEmulator *emulator = (com_apple_dts_SCSIEmulator *)mTargetsArray->getObject(targetID);
// Fail if we don't have a SCSI emulator backing this target
if (!emulator) {
IOLog("ProcessParallelTask: ABORT - !emulator for targetID = %ud\n", targetID);
goto failure_exit;
}
// Fail if we're supposed to transfer data and don't have a data buffer
if (!transferMemDesc && (transferDir != kSCSIDataTransfer_NoDataTransfer)) {
IOLog("ProcessParallelTask: ABORT - !transferMemDesc && (transferDir != kSCSIDataTransfer_NoDataTransfer) - %p and %d\n", transferMemDesc, transferDir);
goto failure_exit;
}
// Fail if we don't have a large enough CDB buffer set aside
if (cdbLength > sizeof(cdbData)) {
IOLog("ProcessParallelTask: ABORT - cdbLength > sizeof(cdbData) - %d vs. %d\n", cdbLength, sizeof(cdbData));
goto failure_exit;
}
if (!GetCommandDescriptorBlock(parallelRequest, &cdbData)) {
IOLog("ProcessParallelTask: ABORT - !GetCommandDescriptorBlock(parallelRequest, &cdbData)\n");
goto failure_exit;
}
if (transferMemDesc && (transferDir != kSCSIDataTransfer_NoDataTransfer)) {
#if 0
// This block isn't necessary as memory descriptors passed in are always autoprepared for us.
// Remember: Any memory descriptors allocated and used internally should be prepared before sending
// or receiving data to/from real hardware
IOReturn res = transferMemDesc->prepare();
if (res != kIOReturnSuccess) {
goto failure_exit;
}
#endif
// We are guaranteed that the memory descriptor will always be sized large enough by
// by SAM/STUC to hold the transfer size requested
dataLen = transferSize;
}
// This is where the "real" work should get done by your hardware. The individual parameters
// are being sent instead of just the task reference as the task is opaque by design and
// the getter/setter methods are protected and available within this class, but not within
// the emulator itself.
emulator->sendCommand(cdbData, cdbLength, transferMemDesc, &dataLen, lun, &scsiStatus, senseBuffer, &senseBufferLen);
// Real hardware should be doing the task processing internally and providing responses
// via an interrupt mechanism. IOSCSIParallelInterfaceController expects this and you
// should always do your task completions from the workloop thread.
CompleteTaskOnWorkloopThread(parallelRequest, true, scsiStatus, dataLen, senseBuffer, senseBufferLen);
return kSCSIServiceResponse_Request_In_Process;
failure_exit:
CompleteTaskOnWorkloopThread(parallelRequest, false, scsiStatus, dataLen, senseBuffer, senseBufferLen);
return kSCSIServiceResponse_Request_In_Process;
}
IOReturn
SATSMARTUserClient::ReadDataThresholds (UInt32 * dataOut,
IOByteCount * outputSize)
{
IOReturn status = kIOReturnSuccess;
IOSATCommand * command = NULL;
IOMemoryDescriptor * buffer = NULL;
DEBUG_LOG("%s[%p]::%s\n", getClassName(), this, __FUNCTION__);
if (!dataOut || !outputSize || *outputSize != sizeof ( ATASMARTDataThresholds ) ) {
return kIOReturnBadArgument;
}
fOutstandingCommands++;
if ( isInactive ( ) )
{
status = kIOReturnNoDevice;
goto ErrorExit;
}
fProvider->retain ( );
command = AllocateCommand ( );
if ( command == NULL )
{
status = kIOReturnNoResources;
goto ReleaseProvider;
}
buffer = IOMemoryDescriptor::withAddress(dataOut, sizeof ( ATASMARTDataThresholds ), kIODirectionIn);
if ( buffer == NULL )
{
status = kIOReturnNoResources;
goto ReleaseCommand;
}
status = buffer->prepare ( );
if ( status != kIOReturnSuccess )
{
goto ReleaseBuffer;
}
command->setBuffer ( buffer );
command->setByteCount ( sizeof ( ATASMARTDataThresholds ) );
command->setFeatures ( kFeaturesRegisterReadDataThresholds );
command->setOpcode ( kATAFnExecIO );
command->setTimeoutMS ( kATAThirtySecondTimeoutInMS );
command->setCylLo ( kSMARTMagicCylinderLoValue );
command->setCylHi ( kSMARTMagicCylinderHiValue );
command->setCommand ( kATAcmdSMART );
command->setFlags ( mATAFlagIORead );
status = SendSMARTCommand ( command );
if ( status == kIOReturnIOError )
{
if ( command->getEndErrorReg ( ) & 0x04 )
{
ERROR_LOG ( "ReadDataThresholds unsupported\n" );
status = kIOReturnUnsupported;
}
if ( command->getEndErrorReg ( ) & 0x10 )
{
ERROR_LOG ( "ReadDataThresholds Not readable\n" );
status = kIOReturnNotReadable;
}
}
*outputSize = buffer->getLength();
buffer->complete ( );
ReleaseBuffer:
buffer->release ( );
buffer = NULL;
ReleaseCommand:
DeallocateCommand ( command );
command = NULL;
ReleaseProvider:
fProvider->release ( );
ErrorExit:
fOutstandingCommands--;
DEBUG_LOG("%s[%p]::%s result %d\n", getClassName(), this, __FUNCTION__, status);
return status;
}
IOReturn
SATSMARTUserClient::GetIdentifyData (UInt32 * dataOut,
IOByteCount * outputSize)
{
IOReturn status = kIOReturnSuccess;
IOSATCommand * command = NULL;
IOMemoryDescriptor * buffer = NULL;
DEBUG_LOG("%s[%p]::%s %p(%ld)\n", getClassName(), this, __FUNCTION__, dataOut, (long)(outputSize));
if (!dataOut || !outputSize || *outputSize < kATADefaultSectorSize ) {
return kIOReturnBadArgument;
}
fOutstandingCommands++;
if ( isInactive ( ) )
{
status = kIOReturnNoDevice;
goto ErrorExit;
}
fProvider->retain ( );
command = AllocateCommand ( );
if ( command == NULL )
{
status = kIOReturnNoResources;
goto ReleaseProvider;
}
buffer = IOMemoryDescriptor::withAddress(dataOut, kATADefaultSectorSize, kIODirectionIn);
if ( buffer == NULL )
{
status = kIOReturnNoResources;
goto ReleaseCommand;
}
status = buffer->prepare ( );
if ( status != kIOReturnSuccess )
{
goto ReleaseBuffer;
}
command->setBuffer ( buffer );
command->setByteCount ( kATADefaultSectorSize );
command->setTransferChunkSize ( kATADefaultSectorSize );
command->setOpcode ( kATAFnExecIO );
command->setTimeoutMS ( kATAThirtySecondTimeoutInMS );
command->setCommand ( kATAcmdDriveIdentify );
command->setFlags ( mATAFlagIORead );
command->setRegMask ( ( ataRegMask ) ( mATAErrFeaturesValid | mATAStatusCmdValid ) );
status = SendSMARTCommand ( command );
if ( status == kIOReturnSuccess )
{
#if defined(__BIG_ENDIAN__)
UInt8 * bufferToCopy = identifyDataPtr;
// The identify device info needs to be byte-swapped on big-endian (ppc)
// systems becuase it is data that is produced by the drive, read across a
// 16-bit little-endian PCI interface, directly into a big-endian system.
// Regular data doesn't need to be byte-swapped because it is written and
// read from the host and is intrinsically byte-order correct.
IOByteCount index;
UInt8 temp;
UInt8 * firstBytePtr;
UInt8 * identifyDataPtr = ( UInt8 * )dataOut;
for ( index = 0; index < buffer->getLength ( ); index += 2 )
{
firstBytePtr = identifyDataPtr; // save pointer
temp = *identifyDataPtr++; // Save Byte0, point to Byte1
*firstBytePtr = *identifyDataPtr; // Byte0 = Byte1
*identifyDataPtr++ = temp; // Byte1 = Byte0
}
#endif
*outputSize = buffer->getLength ( );
DEBUG_LOG("%s[%p]::%s cpy %p %p\n", getClassName(), this, __FUNCTION__, (void*)*outputSize, (void*)buffer->getLength());
}
ReleaseBufferPrepared:
buffer->complete ( );
ReleaseBuffer:
buffer->release ( );
buffer = NULL;
ReleaseCommand:
DeallocateCommand ( command );
command = NULL;
ReleaseProvider:
fProvider->release ( );
ErrorExit:
fOutstandingCommands--;
DEBUG_LOG("%s[%p]::%s result %x\n", getClassName(), this, __FUNCTION__, status);
return status;
}
IOReturn
SATSMARTUserClient::WriteLogAtAddress ( ATASMARTWriteLogStruct * writeLogData,
UInt32 inStructSize )
{
IOReturn status = kIOReturnSuccess;
IOSATCommand * command = NULL;
IOMemoryDescriptor * buffer = NULL;
DEBUG_LOG("%s[%p]::%s\n", getClassName(), this, __FUNCTION__);
if ( inStructSize != sizeof ( ATASMARTWriteLogStruct ) || writeLogData->numSectors > 16 || writeLogData->data_length > kSATMaxDataSize) {
return kIOReturnBadArgument;
}
fOutstandingCommands++;
if ( isInactive ( ) )
{
status = kIOReturnNoDevice;
goto ErrorExit;
}
fProvider->retain ( );
command = AllocateCommand ( );
if ( command == NULL )
{
status = kIOReturnNoResources;
goto ReleaseProvider;
}
//buffer = IOMemoryDescriptor::withAddress(writeLogData->buffer, writeLogData->bufferSize, kIODirectionOut);
buffer = IOMemoryDescriptor::withAddressRange(writeLogData->data_pointer, writeLogData->data_length, kIODirectionOut, fTask);
if ( buffer == NULL )
{
status = kIOReturnVMError;
goto ReleaseCommand;
}
status = buffer->prepare ( );
if ( status != kIOReturnSuccess )
{
goto ReleaseBuffer;
}
command->setBuffer ( buffer );
command->setByteCount ( writeLogData->data_length );
command->setFeatures ( kFeaturesRegisterWriteLogAtAddress );
command->setOpcode ( kATAFnExecIO );
command->setTimeoutMS ( kATAThirtySecondTimeoutInMS );
command->setSectorCount ( writeLogData->numSectors );
command->setSectorNumber ( writeLogData->logAddress );
command->setCylLo ( kSMARTMagicCylinderLoValue );
command->setCylHi ( kSMARTMagicCylinderHiValue );
command->setCommand ( kATAcmdSMART );
command->setFlags ( mATAFlagIOWrite );
status = SendSMARTCommand ( command );
if ( status == kIOReturnIOError )
{
if ( command->getEndErrorReg ( ) & 0x04 )
{
ERROR_LOG ( "WriteLogAtAddress %d unsupported\n", writeLogData->logAddress );
status = kIOReturnUnsupported;
}
if ( command->getEndErrorReg ( ) & 0x10 )
{
ERROR_LOG ( "WriteLogAtAddress %d unwriteable\n", writeLogData->logAddress );
status = kIOReturnNotWritable;
}
}
buffer->complete ( );
ReleaseBuffer:
buffer->release ( );
buffer = NULL;
ReleaseCommand:
DeallocateCommand ( command );
command = NULL;
ReleaseProvider:
fProvider->release ( );
ErrorExit:
fOutstandingCommands--;
DEBUG_LOG("%s[%p]::%s result %d\n", getClassName(), this, __FUNCTION__, status);
return status;
}
IOReturn
SATSMARTUserClient::ReadLogAtAddress ( ATASMARTReadLogStruct * structIn,
void * structOut,
IOByteCount inStructSize,
IOByteCount *outStructSize)
{
IOReturn status = kIOReturnSuccess;
IOSATCommand * command = NULL;
IOMemoryDescriptor * buffer = NULL;
DEBUG_LOG("%s[%p]::%s %p(%ld) %p(%ld)\n", getClassName(), this, __FUNCTION__, structIn, (long)inStructSize, structOut, (long)(outStructSize));
if ( inStructSize != sizeof ( ATASMARTReadLogStruct ) || !outStructSize || *outStructSize < 1) {
return kIOReturnBadArgument;
}
fOutstandingCommands++;
if ( isInactive ( ) )
{
status = kIOReturnNoDevice;
goto ErrorExit;
}
fProvider->retain ( );
command = AllocateCommand ( );
if ( command == NULL )
{
status = kIOReturnNoResources;
goto ReleaseProvider;
}
buffer = IOMemoryDescriptor::withAddress (structOut, *outStructSize, kIODirectionIn);
if ( buffer == NULL )
{
status = kIOReturnNoResources;
goto ReleaseCommand;
}
status = buffer->prepare ( );
DEBUG_LOG("%s[%p]::%s status %x\n", getClassName(), this, __FUNCTION__, status);
if ( status != kIOReturnSuccess )
{
goto ReleaseBuffer;
}
command->setBuffer ( buffer );
command->setByteCount ( buffer->getLength());
command->setFeatures ( kFeaturesRegisterReadLogAtAddress );
command->setOpcode ( kATAFnExecIO );
command->setTimeoutMS ( kATAThirtySecondTimeoutInMS );
command->setSectorCount ( structIn->numSectors );
command->setSectorNumber ( structIn->logAddress );
command->setCylLo ( kSMARTMagicCylinderLoValue );
command->setCylHi ( kSMARTMagicCylinderHiValue );
command->setCommand ( kATAcmdSMART );
command->setFlags ( mATAFlagIORead );
status = SendSMARTCommand ( command );
if ( status == kIOReturnIOError )
{
if ( command->getEndErrorReg ( ) & 0x04 )
{
ERROR_LOG ( "ReadLogAtAddress %d unsupported\n", structIn->logAddress );
status = kIOReturnUnsupported;
}
if ( command->getEndErrorReg ( ) & 0x10 )
{
ERROR_LOG ( "ReadLogAtAddress %d unreadable\n", structIn->logAddress );
status = kIOReturnNotReadable;
}
}
*outStructSize = buffer->getLength();
buffer->complete ( );
ReleaseBuffer:
buffer->release ( );
buffer = NULL;
ReleaseCommand:
DeallocateCommand ( command );
command = NULL;
ReleaseProvider:
fProvider->release ( );
ErrorExit:
fOutstandingCommands--;
DEBUG_LOG("%s[%p]::%s result %d\n", getClassName(), this, __FUNCTION__, status);
return status;
}