//------------------------------------------------------
// スキン情報作成
//------------------------------------------------------
LPD3DXSKININFO iex3DObj::CreateSkinInfo( LPIEMFILE lpIem )
{
int i;
LPD3DXSKININFO lpInfo;
u32 Declaration = D3DFVF_MESHVERTEX;
if( lpIem->version >= 4 ) Declaration = D3DFVF_MESHVERTEX2;
// スキン情報作成
D3DXCreateSkinInfoFVF( lpIem->NumVertex, Declaration, lpIem->NumBone, &lpInfo );
// ボーン設定
for( i=0 ; i<lpIem->NumBone ; i++ ){
lpInfo->SetBoneInfluence( i, lpIem->lpBone[i].IndexNum, lpIem->lpBone[i].Index, lpIem->lpBone[i].Influence );
}
return lpInfo;
}
void cSkinnedMesh::UpdateSkinnedMesh( ST_BONE* pBone )
{
// pCurrentBoneMatrices 를 계산하시오
// pCurrentBoneMatrices = pBoneOffsetMatrices * ppBoneMatrixPtrs
if(pBone->pMeshContainer)
{
ST_BONE_MESH* pBoneMesh = (ST_BONE_MESH*)pBone->pMeshContainer;
if(pBoneMesh->pSkinInfo)
{
LPD3DXSKININFO pSkinInfo = pBoneMesh->pSkinInfo;
DWORD dwNumBones = pSkinInfo->GetNumBones();
for (DWORD i = 0; i < dwNumBones; ++i)
{
pBoneMesh->pCurrentBoneMatrices[i] =
pBoneMesh->pBoneOffsetMatrices[i] * *(pBoneMesh->ppBoneMatrixPtrs[i]);
}
}
BYTE* src = NULL;
BYTE* dest = NULL;
pBoneMesh->pOrigMesh->LockVertexBuffer( D3DLOCK_READONLY, (void**)&src );
pBoneMesh->MeshData.pMesh->LockVertexBuffer( 0, (void**)&dest );
//MeshData.pMesh을 업데이트 시켜준다.
pBoneMesh->pSkinInfo->UpdateSkinnedMesh(
pBoneMesh->pCurrentBoneMatrices, NULL, src, dest );
pBoneMesh->MeshData.pMesh->UnlockVertexBuffer();
pBoneMesh->pOrigMesh->UnlockVertexBuffer();
}
//재귀적으로 모든 프레임에 대해서 실행.
if(pBone->pFrameFirstChild)
{
UpdateSkinnedMesh((ST_BONE*)pBone->pFrameFirstChild);
}
if(pBone->pFrameSibling)
{
UpdateSkinnedMesh((ST_BONE*)pBone->pFrameSibling);
}
}
void cSkinnedMesh::SetupBoneMatrixPtrs( ST_BONE* pBone )
{
// 각 프레임의 메시 컨테이너에 있는 pSkinInfo를 이용하여 영향받는 모든
// 프레임의 매트릭스를 ppBoneMatrixPtrs에 연결한다.
// pSkinInfo->GetNumBones() 으로 영향받는 본의 개수를 찾음.
// pSkinInfo->GetBoneName(i) 로 i번 프레임의 이름을 찾음
// D3DXFrameFind(루트 프레임, 프레임 이름) 로 프레임을 찾음.
// 찾아서 월드매트릭스를 걸어줘라.
if(pBone->pMeshContainer)
{
ST_BONE_MESH* pBoneMesh = (ST_BONE_MESH*)pBone->pMeshContainer;
if(pBoneMesh->pSkinInfo)
{
LPD3DXSKININFO pSkinInfo = pBoneMesh->pSkinInfo;
DWORD dwNumBones = pSkinInfo->GetNumBones();
for (DWORD i = 0; i < dwNumBones; ++i)
{
LPCSTR szBoneName = pSkinInfo->GetBoneName(i);
ST_BONE* pBone = (ST_BONE*)D3DXFrameFind(m_pRoot, szBoneName);
pBoneMesh->ppBoneMatrixPtrs[i] = &(pBone->matWorld);
}
}
}
//재귀적으로 모든 프레임에 대해서 실행.
if(pBone->pFrameFirstChild)
{
SetupBoneMatrixPtrs((ST_BONE*)pBone->pFrameFirstChild);
}
if(pBone->pFrameSibling)
{
SetupBoneMatrixPtrs((ST_BONE*)pBone->pFrameSibling);
}
}
STDMETHODIMP cAllocateHierarchy::CreateMeshContainer( THIS_ LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer )
{
ST_BONE_MESH* pBoneMesh = new ST_BONE_MESH;
ZeroMemory(pBoneMesh, sizeof(ST_BONE_MESH));
pBoneMesh->MeshData.Type = pMeshData->Type;
assert(pMeshData->Type == D3DXMESHTYPE_MESH);
pMeshData->pMesh->AddRef();
pBoneMesh->MeshData.pMesh = pMeshData->pMesh;
for (DWORD i = 0; i < NumMaterials; ++i)
{
pBoneMesh->vecMaterial.push_back(pMaterials[i].MatD3D);
std::string sTextureFile("/");
sTextureFile += std::string(pMaterials[i].pTextureFilename);
LPDIRECT3DTEXTURE9 pTexture = g_pTextureManager->GetTexture(m_sFolder + sTextureFile);
pBoneMesh->vecTexture.push_back(pTexture);
}
if(pAdjacency)
{
pBoneMesh->pAdjacency = new DWORD[pMeshData->pMesh->GetNumVertices()];
memcpy(pBoneMesh->pAdjacency, pAdjacency, pMeshData->pMesh->GetNumVertices() * sizeof(DWORD));
}
pSkinInfo->AddRef();
pBoneMesh->pSkinInfo = pSkinInfo;
// step 1. pSkinInfo 저장
// step 2. 원본 메쉬 복사
// step 3. pSkinInfo->GetNumBones()를 통해 영향력을 미치는 모든 본에 대한 매트릭스 들을 세팅
// ppBoneMatrixPtrs, pBoneOffsetMatrices, pCurrentBoneMatrices를 동적할당
// step 4. 동적 할당된 pBoneOffsetMatrices 매트릭스에 값 저장.
// pSkinInfo->GetBoneOffsetMatrix(i)
*ppNewMeshContainer = pBoneMesh;
return S_OK;
}
/**
* \brief callback called when a mesh data is encountered during the .x file load
* \param Name - name of the Mesh (const char*)
* \param meshData - the mesh data
* \param materials - material array
* \param effectInstances - effect files / settings for the mesh
* \param numMaterials - number of materials in the mesh
* \param adjacency - adjacency array
* \param pSkinInfo - skin info.
* \param retNewMeshContainer - output pointer to assign our newly created mesh container
* \return success code
* \author Keith Ditchburn \date 17 July 2005
*/
HRESULT CMeshHierarchy::CreateMeshContainer(
LPCSTR Name,
CONST D3DXMESHDATA *meshData,
CONST D3DXMATERIAL *materials,
CONST D3DXEFFECTINSTANCE *effectInstances,
DWORD numMaterials,
CONST DWORD *adjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER* retNewMeshContainer)
{
// Create a mesh container structure to fill and initilaise to zero values
// Note: I use my extended version of the structure (D3DXMESHCONTAINER_EXTENDED) defined in MeshStructures.h
D3DXMESHCONTAINER_EXTENDED *newMeshContainer=new D3DXMESHCONTAINER_EXTENDED;
ZeroMemory(newMeshContainer, sizeof(D3DXMESHCONTAINER_EXTENDED));
// Always a good idea to initialise return pointer before proceeding
*retNewMeshContainer = 0;
// The mesh name (may be 0) needs copying over
if (Name && strlen(Name))
{
newMeshContainer->Name=CUtility::DuplicateCharString(Name);
CUtility::DebugString("Added mesh: "+ToString(Name)+"\n");
}
else
{
CUtility::DebugString("Added Mesh: no name given\n");
}
// The mesh type (D3DXMESHTYPE_MESH, D3DXMESHTYPE_PMESH or D3DXMESHTYPE_PATCHMESH)
if (meshData->Type!=D3DXMESHTYPE_MESH)
{
// This demo does not handle mesh types other than the standard
// Other types are D3DXMESHTYPE_PMESH (progressive mesh) and D3DXMESHTYPE_PATCHMESH (patch mesh)
DestroyMeshContainer(newMeshContainer);
return E_FAIL;
}
newMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
// Adjacency data - holds information about triangle adjacency, required by the ID3DMESH object
DWORD dwFaces = meshData->pMesh->GetNumFaces();
newMeshContainer->pAdjacency = new DWORD[dwFaces*3];
memcpy(newMeshContainer->pAdjacency, adjacency, sizeof(DWORD) * dwFaces*3);
// Get the Direct3D device, luckily this is held in the mesh itself (Note: must release it when done with it)
LPDIRECT3DDEVICE9 pd3dDevice = 0;
meshData->pMesh->GetDevice(&pd3dDevice);
D3DVERTEXELEMENT9 decl[MAX_FVF_DECL_SIZE];
meshData->pMesh->GetDeclaration(decl);
HRESULT res;
DWORD dwVertexStride = meshData->pMesh->GetNumBytesPerVertex ();
DWORD dwNumDeclarations = 0;
bool haveNormals = false;
for (int i=0; (i < MAX_FVF_DECL_SIZE) && (decl[i].Stream != 0xFF); i++) {
if (decl[dwNumDeclarations].Usage == D3DDECLUSAGE_NORMAL)
haveNormals = true;
if (decl[dwNumDeclarations].Usage == D3DDECLUSAGE_TANGENT) {
dwNumDeclarations = 0;
break;
}
dwNumDeclarations++;
}
if (dwNumDeclarations) {
if (!haveNormals) {
// normals
decl[dwNumDeclarations].Stream = 0;
decl[dwNumDeclarations].Offset = (WORD)dwVertexStride;
decl[dwNumDeclarations].Type = D3DDECLTYPE_FLOAT3;
decl[dwNumDeclarations].Method = D3DDECLMETHOD_DEFAULT;
decl[dwNumDeclarations].Usage = D3DDECLUSAGE_NORMAL;
decl[dwNumDeclarations].UsageIndex = 0;
dwVertexStride += sizeof(float)*3;
dwNumDeclarations++;
}
// tangent
decl[dwNumDeclarations].Stream = 0;
decl[dwNumDeclarations].Offset = (WORD)dwVertexStride;
decl[dwNumDeclarations].Type = D3DDECLTYPE_FLOAT3;
decl[dwNumDeclarations].Method = D3DDECLMETHOD_DEFAULT;
decl[dwNumDeclarations].Usage = D3DDECLUSAGE_TANGENT;
decl[dwNumDeclarations].UsageIndex = 0;
dwNumDeclarations++;
// ending element
memset (&decl[dwNumDeclarations], 0, sizeof(D3DVERTEXELEMENT9));
decl[dwNumDeclarations].Stream = 0xFF;
decl[dwNumDeclarations].Type = D3DDECLTYPE_UNUSED;
}
res = meshData->pMesh->CloneMesh(meshData->pMesh->GetOptions(),decl,pd3dDevice,&newMeshContainer->MeshData.pMesh);
assert(res == D3D_OK);
if (!haveNormals) {
res = D3DXComputeNormals(newMeshContainer->MeshData.pMesh,newMeshContainer->pAdjacency); // compute normals
assert(res == D3D_OK);
}
res = D3DXComputeTangent(newMeshContainer->MeshData.pMesh,0,0,1,TRUE,NULL); // compute tangent(u)
assert(res == D3D_OK);
//newMeshContainer->MeshData.pMesh=meshData->pMesh;
newMeshContainer->MeshData.pMesh->AddRef();
// Create material and texture arrays. Note that I always want to have at least one
newMeshContainer->NumMaterials = max(numMaterials,1);
newMeshContainer->exMaterials = new D3DMATERIAL9[newMeshContainer->NumMaterials];
newMeshContainer->exTextures = new LPDIRECT3DTEXTURE9[newMeshContainer->NumMaterials];
ZeroMemory(newMeshContainer->exTextures, sizeof(LPDIRECT3DTEXTURE9) * newMeshContainer->NumMaterials);
if (numMaterials>0)
{
// Load all the textures and copy the materials over
for(DWORD i = 0; i < numMaterials; ++i)
{
newMeshContainer->exTextures[i] = 0;
newMeshContainer->exMaterials[i]=materials[i].MatD3D;
if(materials[i].pTextureFilename)
{
std::string texturePath(materials[i].pTextureFilename);
if (CUtility::FindFile(&texturePath))
{
// Use the D3DX function to load the texture
if(FAILED(D3DXCreateTextureFromFile(pd3dDevice, texturePath.c_str(),
&newMeshContainer->exTextures[i])))
{
CUtility::DebugString("Could not load texture: "+texturePath+"\n");
}
}
else
{
CUtility::DebugString("Could not find texture: "+ToString(materials[i].pTextureFilename)+"\n");
}
}
}
}
else
// make a default material in the case where the mesh did not provide one
{
ZeroMemory(&newMeshContainer->exMaterials[0], sizeof( D3DMATERIAL9 ) );
newMeshContainer->exMaterials[0].Diffuse.r = 0.5f;
newMeshContainer->exMaterials[0].Diffuse.g = 0.5f;
newMeshContainer->exMaterials[0].Diffuse.b = 0.5f;
newMeshContainer->exMaterials[0].Specular = newMeshContainer->exMaterials[0].Diffuse;
newMeshContainer->exTextures[0]=0;
}
// If there is skin data associated with the mesh copy it over
if (pSkinInfo)
{
// save off the SkinInfo
newMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
// Need an array of offset matrices to move the vertices from the figure space to the bone's space
UINT numBones = pSkinInfo->GetNumBones();
newMeshContainer->exBoneOffsets = new D3DXMATRIX[numBones];
// Create the arrays for the bones and the frame matrices
newMeshContainer->exFrameCombinedMatrixPointer = new D3DXMATRIX*[numBones];
// get each of the bone offset matrices so that we don't need to get them later
for (UINT i = 0; i < numBones; i++)
newMeshContainer->exBoneOffsets[i] = *(newMeshContainer->pSkinInfo->GetBoneOffsetMatrix(i));
CUtility::DebugString("Mesh has skinning info.\n Number of bones is: "+ToString(numBones)+"\n");
// Note: in the Microsoft samples a GenerateSkinnedMesh function is called here in order to prepare
// the skinned mesh data for optimial hardware acceleration. As mentioned in the notes this sample
// does not do hardware skinning but instead uses software skinning.
}
else
{
// No skin info so 0 all the pointers
newMeshContainer->pSkinInfo = 0;
newMeshContainer->exBoneOffsets = 0;
newMeshContainer->exSkinMesh = 0;
newMeshContainer->exFrameCombinedMatrixPointer = 0;
}
// When we got the device we caused an internal reference count to be incremented
// So we now need to release it
pd3dDevice->Release();
// The mesh may contain a reference to an effect file
if (effectInstances)
{
if (effectInstances->pEffectFilename)
CUtility::DebugString("This .x file references an effect file. Effect files are not handled by this demo\n");
}
// Set the output mesh container pointer to our newly created one
*retNewMeshContainer = newMeshContainer;
return S_OK;
}
//-----------------------------------------------------------------------------
// Desc: 在这里是调用了成员函数 GenerateGameSkinMesh(pMeshContainer);
// 是在这里加载了蒙皮信息
//-----------------------------------------------------------------------------
HRESULT DexAllocateHierarchy::CreateMeshContainer(LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer)
{
HRESULT hr;
stDexMeshContainerEx *pMeshContainer = NULL;
LPDIRECT3DDEVICE9 device = NULL;
UINT NumFaces;
UINT iMaterial;
UINT iBone, cBones;
LPD3DXMESH pMesh = NULL;
*ppNewMeshContainer = NULL;
// this sample does not handle patch meshes, so fail when one is found
if (pMeshData->Type != D3DXMESHTYPE_MESH)
{
hr = E_FAIL;
return hr;
}
// get the pMesh interface pointer out of the mesh data structure
pMesh = pMeshData->pMesh;
pMesh->GetDevice( &device );
// this sample does not FVF compatible meshes, so fail when one is found
if (pMesh->GetFVF() == 0)
{
hr = E_FAIL;
return hr;
}
// allocate the overloaded structure to return as a D3DXMESHCONTAINER
pMeshContainer = new stDexMeshContainerEx;
if (pMeshContainer == NULL)
{
hr = E_OUTOFMEMORY;
return hr;
}
memset(pMeshContainer, 0, sizeof(stDexMeshContainerEx));
// make sure and copy the name. All memory as input belongs to caller, interfaces can be addref'd though
hr = AllocateName(Name, &pMeshContainer->Name);
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
NumFaces = pMesh->GetNumFaces();
// if no normals are in the mesh, add them
if (!(pMesh->GetFVF() & D3DFVF_NORMAL))
{
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
// clone the mesh to make room for the normals
hr = pMesh->CloneMeshFVF( pMesh->GetOptions(),
pMesh->GetFVF() | D3DFVF_NORMAL,
device, &pMeshContainer->MeshData.pMesh );
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
// get the new pMesh pointer back out of the mesh container to use
// NOTE: we do not release pMesh because we do not have a reference to it yet
pMesh = pMeshContainer->MeshData.pMesh;
// now generate the normals for the pmesh
D3DXComputeNormals( pMesh, NULL );
}
else // if no normals, just add a reference to the mesh for the mesh container
{
pMeshContainer->MeshData.pMesh = pMesh;
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
pMesh->AddRef();
}
// allocate memory to contain the material information. This sample uses
// the D3D9 materials and texture names instead of the EffectInstance style materials
pMeshContainer->NumMaterials = max(1, NumMaterials);
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->ppTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
pMeshContainer->pAdjacency = new DWORD[NumFaces*3];
if ((pMeshContainer->pAdjacency == NULL) || (pMeshContainer->pMaterials == NULL))
{
hr = E_OUTOFMEMORY;
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
memcpy(pMeshContainer->pAdjacency, pAdjacency, sizeof(DWORD) * NumFaces*3);
memset(pMeshContainer->ppTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
// if materials provided, copy them
if (NumMaterials > 0)
{
memcpy(pMeshContainer->pMaterials, pMaterials, sizeof(D3DXMATERIAL) * NumMaterials);
for (iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
if (pMeshContainer->pMaterials[iMaterial].pTextureFilename != NULL)
{
//TCHAR file[1000];
//FindMediaFile(file,pMeshContainer->pMaterials[iMaterial].pTextureFilename);
// 根据纹理的文件名创建纹理资源，如果创建失败，纹理指针必须赋成NULL
// MessageNULL(file);
//D3DXCreateTextureFromFileEx(device, file,
// D3DX_DEFAULT_NONPOW2,
// D3DX_DEFAULT_NONPOW2,
// D3DX_FROM_FILE, 0, D3DFMT_UNKNOWN, D3DPOOL_MANAGED,
// D3DX_FILTER_NONE, D3DX_FILTER_NONE, D3DCOLOR_XRGB(0,0,0), NULL, NULL,
// &pMeshContainer->ppTextures[iMaterial]);
string texname = "model/"; //轉到model文件夾中去找紋理
texname += pMeshContainer->pMaterials[iMaterial].pTextureFilename;
if( FAILED( D3DXCreateTextureFromFile( device, texname.c_str(),
&pMeshContainer->ppTextures[iMaterial] ) ) )
{
getLog()->BeginLog();
getLog()->Log(log_allert, "load model texture %s failed! \n", texname.c_str());
pMeshContainer->ppTextures[iMaterial] = NULL;
getLog()->EndLog();
}
// don't remember a pointer into the dynamic memory, just forget the name after loading
pMeshContainer->pMaterials[iMaterial].pTextureFilename = NULL;
}
}
}
else // if no materials provided, use a default one
{
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
memset(&pMeshContainer->pMaterials[0].MatD3D, 0, sizeof(D3DMATERIAL9));
pMeshContainer->pMaterials[0].MatD3D.Diffuse.r = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.g = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.b = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
}
// if there is skinning information, save off the required data and then setup for HW skinning
if (pSkinInfo != NULL)
{
// first save off the SkinInfo and original mesh data
pMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
pMeshContainer->pOrigMesh = pMesh;
pMesh->AddRef();
// Will need an array of offset matrices to move the vertices from the figure space to the bone's space
cBones = pSkinInfo->GetNumBones();
pMeshContainer->pBoneOffsetMatrices = new D3DXMATRIX[cBones];
if (pMeshContainer->pBoneOffsetMatrices == NULL)
{
hr = E_OUTOFMEMORY;
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
// get each of the bone offset matrices so that we don't need to get them later
for (iBone = 0; iBone < cBones; iBone++)
{
pMeshContainer->pBoneOffsetMatrices[iBone] = *(pMeshContainer->pSkinInfo->GetBoneOffsetMatrix(iBone));
}
// GenerateGameSkinMesh will take the general skinning information and transform it to a HW friendly version
hr = GenerateGameSkinMesh(device, pMeshContainer );
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
}
*ppNewMeshContainer = pMeshContainer;
pMeshContainer = NULL;
// call Destroy function to properly clean up the memory allocated
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
//-----------------------------------------------------------------------------
// Name: CMultiAnimAllocateHierarchy::CreateMeshContainer()
// Desc: Called by D3DX during the loading of a mesh hierarchy. At a minumum,
// the app should allocate a D3DXMESHCONTAINER or a child of it and fill
// in the members based on the parameters here. The app can further
// customize the allocation behavior here. In our case, we initialize
// m_amxBoneOffsets from the skin info for convenience reason.
// Then we call ConvertToIndexedBlendedMesh to obtain a new mesh object
// that's compatible with the palette size we have to work with.
//-----------------------------------------------------------------------------
HRESULT CMultiAnimAllocateHierarchy::CreateMeshContainer( THIS_
LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer )
{
assert( m_pMA );
* ppNewMeshContainer = NULL;
HRESULT hr = S_OK;
MultiAnimMC * pMC = new MultiAnimMC;
if( pMC == NULL )
{ hr = E_OUTOFMEMORY; goto e_Exit; }
ZeroMemory( pMC, sizeof( MultiAnimMC ) );
// if this is a static mesh, exit early; we're only interested in skinned meshes
if( pSkinInfo == NULL )
{
hr = S_OK;
goto e_Exit;
}
// only support mesh type
if( pMeshData->Type != D3DXMESHTYPE_MESH )
{ hr = E_FAIL; goto e_Exit; }
if( Name )
pMC->Name = (CHAR *) HeapCopy( (CHAR *) Name );
else
pMC->Name = (CHAR *) HeapCopy( "<no_name>" );
// copy the mesh over
pMC->MeshData.Type = pMeshData->Type;
pMC->MeshData.pMesh = pMeshData->pMesh;
pMC->MeshData.pMesh->AddRef();
// copy adjacency over
{
DWORD dwNumFaces = pMC->MeshData.pMesh->GetNumFaces();
pMC->pAdjacency = new DWORD[ 3 * dwNumFaces ];
if( pMC->pAdjacency == NULL )
{ hr = E_OUTOFMEMORY; goto e_Exit; }
CopyMemory( pMC->pAdjacency, pAdjacency, 3 * sizeof( DWORD ) * dwNumFaces );
}
// ignore effects instances
pMC->pEffects = NULL;
// alloc and copy materials
pMC->NumMaterials = max( 1, NumMaterials );
pMC->pMaterials = new D3DXMATERIAL [ pMC->NumMaterials ];
pMC->m_apTextures = new LPDIRECT3DTEXTURE9 [ pMC->NumMaterials ];
if( pMC->pMaterials == NULL || pMC->m_apTextures == NULL )
{ hr = E_OUTOFMEMORY; goto e_Exit; }
if( NumMaterials > 0 )
{
CopyMemory( pMC->pMaterials, pMaterials, NumMaterials * sizeof( D3DXMATERIAL ) );
for( DWORD i = 0; i < NumMaterials; ++ i )
{
if( pMC->pMaterials[ i ].pTextureFilename )
{
// CALLBACK to get valid filename
TCHAR sNewPath[ MAX_PATH ];
TCHAR tszTexName[ MAX_PATH ];
if( FAILED( DXUtil_ConvertAnsiStringToGenericCch( tszTexName,
pMC->pMaterials[ i ].pTextureFilename,
MAX_PATH ) ) )
pMC->m_apTextures[ i ] = NULL;
else
if( SUCCEEDED( DXUtil_FindMediaFileCch( sNewPath, MAX_PATH, tszTexName ) ) )
{
// create the D3D texture
if( FAILED( D3DXCreateTextureFromFile( m_pMA->m_pDevice,
sNewPath,
&pMC->m_apTextures[ i ] ) ) )
pMC->m_apTextures[ i ] = NULL;
}
else
pMC->m_apTextures[ i ] = NULL;
}
else
pMC->m_apTextures[ i ] = NULL;
}
}
else // mock up a default material and set it
{
ZeroMemory( & pMC->pMaterials[ 0 ].MatD3D, sizeof( ParaMaterial ) );
pMC->pMaterials[ 0 ].MatD3D.Diffuse.r = 0.5f;
pMC->pMaterials[ 0 ].MatD3D.Diffuse.g = 0.5f;
pMC->pMaterials[ 0 ].MatD3D.Diffuse.b = 0.5f;
pMC->pMaterials[ 0 ].MatD3D.Specular = pMC->pMaterials[ 0 ].MatD3D.Diffuse;
pMC->pMaterials[ 0 ].pTextureFilename = NULL;
}
// save the skininfo object
pMC->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
// Get the bone offset matrices from the skin info
pMC->m_amxBoneOffsets = new Matrix4[ pSkinInfo->GetNumBones() ];
if( pMC->m_amxBoneOffsets == NULL )
{ hr = E_OUTOFMEMORY; goto e_Exit; }
{
for( DWORD i = 0; i < pSkinInfo->GetNumBones(); ++ i )
pMC->m_amxBoneOffsets[ i ] = * (Matrix4 *) pSkinInfo->GetBoneOffsetMatrix( i );
}
//
// Determine the palette size we need to work with, then call ConvertToIndexedBlendedMesh
// to set up a new mesh that is compatible with the palette size.
//
{
UINT iPaletteSize = 0;
m_pMA->m_pEffect->GetInt( "MATRIX_PALETTE_SIZE", (INT *) & iPaletteSize );
pMC->m_dwNumPaletteEntries = min( iPaletteSize, pMC->pSkinInfo->GetNumBones() );
}
// generate the skinned mesh - creates a mesh with blend weights and indices
hr = pMC->pSkinInfo->ConvertToIndexedBlendedMesh( pMC->MeshData.pMesh,
D3DXMESH_MANAGED | D3DXMESHOPT_VERTEXCACHE,
pMC->m_dwNumPaletteEntries,
pMC->pAdjacency,
NULL,
NULL,
NULL,
&pMC->m_dwMaxNumFaceInfls,
&pMC->m_dwNumAttrGroups,
&pMC->m_pBufBoneCombos,
&pMC->m_pWorkingMesh );
if( FAILED( hr ) )
goto e_Exit;
// Make sure the working set is large enough for this mesh.
// This is a bone array used for all mesh containers as a working
// set during drawing. If one was created previously that isn't
// large enough for this mesh, we have to reallocate.
if( m_pMA->m_dwWorkingPaletteSize < pMC->m_dwNumPaletteEntries )
{
if( m_pMA->m_amxWorkingPalette )
delete [] m_pMA->m_amxWorkingPalette;
m_pMA->m_dwWorkingPaletteSize = pMC->m_dwNumPaletteEntries;
m_pMA->m_amxWorkingPalette = new Matrix4[ m_pMA->m_dwWorkingPaletteSize ];
if( m_pMA->m_amxWorkingPalette == NULL )
{
m_pMA->m_dwWorkingPaletteSize = 0;
hr = E_OUTOFMEMORY;
goto e_Exit;
}
}
// ensure the proper vertex format for the mesh
{
DWORD dwOldFVF = pMC->m_pWorkingMesh->GetFVF();
DWORD dwNewFVF = ( dwOldFVF & D3DFVF_POSITION_MASK ) | D3DFVF_NORMAL | D3DFVF_TEX1 | D3DFVF_LASTBETA_UBYTE4;
if( dwNewFVF != dwOldFVF )
{
LPD3DXMESH pMesh;
hr = pMC->m_pWorkingMesh->CloneMeshFVF( pMC->m_pWorkingMesh->GetOptions(),
dwNewFVF,
m_pMA->m_pDevice,
&pMesh );
if( FAILED( hr ) )
goto e_Exit;
pMC->m_pWorkingMesh->Release();
pMC->m_pWorkingMesh = pMesh;
// if the loaded mesh didn't contain normals, compute them here
if( ! ( dwOldFVF & D3DFVF_NORMAL ) )
{
hr = D3DXComputeNormals( pMC->m_pWorkingMesh, NULL );
if( FAILED( hr ) )
goto e_Exit;
}
}
}
// Interpret the UBYTE4 as a Color.
// The GeForce3 doesn't support the UBYTE4 decl type. So, we convert any
// blend indices to a Color semantic, and later in the shader convert
// it back using the D3DCOLORtoUBYTE4() intrinsic. Note that we don't
// convert any data, just the declaration.
D3DVERTEXELEMENT9 pDecl[ MAX_FVF_DECL_SIZE ];
D3DVERTEXELEMENT9 * pDeclCur;
hr = pMC->m_pWorkingMesh->GetDeclaration( pDecl );
if( FAILED( hr ) )
goto e_Exit;
pDeclCur = pDecl;
while( pDeclCur->Stream != 0xff )
{
if( ( pDeclCur->Usage == D3DDECLUSAGE_BLENDINDICES ) && ( pDeclCur->UsageIndex == 0 ) )
pDeclCur->Type = D3DDECLTYPE_D3DCOLOR;
pDeclCur++;
}
hr = pMC->m_pWorkingMesh->UpdateSemantics( pDecl );
if( FAILED( hr ) )
goto e_Exit;
e_Exit:
if( FAILED( hr ) )
{
if( pMC )
DestroyMeshContainer( pMC );
}
else
* ppNewMeshContainer = pMC;
return hr;
}
/*
==================
Callback called when a mesh data is encountered during the .x file load
Name - name of the Mesh (const char*)
meshData - the mesh data
materials - material array
effectInstances - effect files / settings for the mesh
numMaterials - number of materials in the mesh
adjacency - adjacency array
pSkinInfo - skin info.
etNewMeshContainer - output pointer to assign our newly created mesh container
==================
*/
HRESULT XMeshHierarchy::CreateMeshContainer(
LPCSTR Name,
CONST D3DXMESHDATA *meshData,
CONST D3DXMATERIAL *materials,
CONST D3DXEFFECTINSTANCE *effectInstances,
DWORD numMaterials,
CONST DWORD *adjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER* retNewMeshContainer)
{
// Create a mesh container structure to fill and initilaise to zero values
// Note: I use my extended version of the structure (D3DXMESHCONTAINER_EXTENDED) defined in MeshStructures.h
D3DXMESHCONTAINER_EXTENDED *newMeshContainer=new D3DXMESHCONTAINER_EXTENDED;
ZeroMemory(newMeshContainer, sizeof(D3DXMESHCONTAINER_EXTENDED));
// Always a good idea to initialise return pointer before proceeding
*retNewMeshContainer = 0;
// The mesh name (may be 0) needs copying over
if (Name && strlen(Name))
{
newMeshContainer->Name = Debug->DuplicateCharString(Name);
}
else
{
}
// The mesh type (D3DXMESHTYPE_MESH, D3DXMESHTYPE_PMESH or D3DXMESHTYPE_PATCHMESH)
if (meshData->Type!=D3DXMESHTYPE_MESH)
{
// This demo does not handle mesh types other than the standard
// Other types are D3DXMESHTYPE_PMESH (progressive mesh) and D3DXMESHTYPE_PATCHMESH (patch mesh)
DestroyMeshContainer(newMeshContainer);
return E_FAIL;
}
newMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
// Adjacency data - holds information about triangle adjacency, required by the ID3DMESH object
DWORD dwFaces = meshData->pMesh->GetNumFaces();
newMeshContainer->pAdjacency = new DWORD[dwFaces*3];
memcpy(newMeshContainer->pAdjacency, adjacency, sizeof(DWORD) * dwFaces*3);
// Get the Direct3D device, luckily this is held in the mesh itself (Note: must release it when done with it)
LPDIRECT3DDEVICE9 pd3dDevice = 0;
meshData->pMesh->GetDevice(&pd3dDevice);
// Can just assign pointer and add a ref rather than need to clone
newMeshContainer->MeshData.pMesh=meshData->pMesh;
newMeshContainer->MeshData.pMesh->AddRef();
// Create material and texture arrays. Note that I always want to have at least one
newMeshContainer->NumMaterials = max (numMaterials, 1);
newMeshContainer->exMaterials = new D3DMATERIAL9[newMeshContainer->NumMaterials];
newMeshContainer->exTextures = new LPDIRECT3DTEXTURE9[newMeshContainer->NumMaterials];
ZeroMemory(newMeshContainer->exTextures, sizeof(LPDIRECT3DTEXTURE9) * newMeshContainer->NumMaterials);
if (numMaterials > 0)
{
// Load all the textures and copy the materials over
for(DWORD i = 0; i < numMaterials; ++i)
{
newMeshContainer->exTextures[i] = 0;
newMeshContainer->exMaterials[i]=materials[i].MatD3D;
if(materials[i].pTextureFilename)
{
char mTexturePath [2048];
mTexturePath [0] = 0;
strcat (mTexturePath, mPath);
strcat (mTexturePath, "\\");
strcat (mTexturePath, materials[i].pTextureFilename);
// Use the D3DX function to load the texture
if(FAILED(D3DXCreateTextureFromFile(pd3dDevice, mTexturePath,
&newMeshContainer->exTextures[i])))
{
Debug->Header ("Could not load texture:", 3);
Debug->DataChar (mTexturePath, 1);
return 0;
}
}
}
}
else
// make a default material in the case where the mesh did not provide one
{
ZeroMemory(&newMeshContainer->exMaterials[0], sizeof( D3DMATERIAL9 ) );
newMeshContainer->exMaterials[0].Diffuse.r = 0.5f;
newMeshContainer->exMaterials[0].Diffuse.g = 0.5f;
newMeshContainer->exMaterials[0].Diffuse.b = 0.5f;
newMeshContainer->exMaterials[0].Specular = newMeshContainer->exMaterials[0].Diffuse;
newMeshContainer->exTextures[0]=0;
}
// If there is skin data associated with the mesh copy it over
if (pSkinInfo)
{
// save off the SkinInfo
newMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
// Need an array of offset matrices to move the vertices from the figure space to the bone's space
UINT numBones = pSkinInfo->GetNumBones();
newMeshContainer->exBoneOffsets = new D3DXMATRIX[numBones];
// Create the arrays for the bones and the frame matrices
newMeshContainer->exFrameCombinedMatrixPointer = new D3DXMATRIX*[numBones];
// get each of the bone offset matrices so that we don't need to get them later
for (UINT i = 0; i < numBones; i++)
newMeshContainer->exBoneOffsets[i] = *(newMeshContainer->pSkinInfo->GetBoneOffsetMatrix(i));
Debug->Header ("Mesh has skinning info. Number of bones is:", 3);
Debug->DataInt (numBones, 1);
// Note: in the Microsoft samples a GenerateSkinnedMesh function is called here in order to prepare
// the skinned mesh data for optimial hardware acceleration. As mentioned in the notes this sample
// does not do hardware skinning but instead uses software skinning.
}
else
{
Debug->Header ("Mesh has no skinning info", 1);
// No skin info so 0 all the pointers
newMeshContainer->pSkinInfo = 0;
newMeshContainer->exBoneOffsets = 0;
newMeshContainer->exSkinMesh = 0;
newMeshContainer->exFrameCombinedMatrixPointer = 0;
}
// When we got the device we caused an internal reference count to be incremented
// So we now need to release it
pd3dDevice->Release();
// The mesh may contain a reference to an effect file
if (effectInstances)
{
if (effectInstances->pEffectFilename)
Debug->Header ("This .x file references an effect file. Effect files are not handled by IndieLib", 1);
}
// Set the output mesh container pointer to our newly created one
*retNewMeshContainer = newMeshContainer;
return S_OK;
}
//---------------------------------
HRESULT CAllocateHierarchy::CreateMeshContainer (LPCSTR Name, const D3DXMESHDATA *pMeshData, \
const D3DXMATERIAL *pMaterials,const D3DXEFFECTINSTANCE *pEffectInstances, \
DWORD NumMaterials, const DWORD *pAdjacency, LPD3DXSKININFO pSkinInfo, \
LPD3DXMESHCONTAINER *ppNewMeshContainer)
{
DWORD i, j;
D3DXMESHCONTAINER_DERIVED *pMeshContainer;
LPD3DXMESH pMesh, pTempMesh;
HRESULT hr = E_FAIL;
*ppNewMeshContainer = NULL;
//podporované su iba bezne meshe
if (pMeshData->Type != D3DXMESHTYPE_MESH)
return E_FAIL;
//alokácia derivovanej štruktúry kvôli návratovej hodnote - LPD3DXMESHCONTAINER
pMeshContainer = new D3DXMESHCONTAINER_DERIVED;
if (pMeshContainer == NULL)
return E_OUTOFMEMORY;
pMesh = pMeshData->pMesh;
pMesh->AddRef();
pMeshContainer->NumMaterials = max (1, NumMaterials);
pMeshContainer->dwNumPaintings = 1;
pMeshContainer->dwNumCoords = 1;
if (m_localData.xmlTextures)
{
const char *szTemp;
if (szTemp = g_pXML->Attr (m_localData.xmlTextures, "paint_num"))
pMeshContainer->dwNumPaintings = (DWORD)atoi (szTemp);
if (szTemp = g_pXML->Attr (m_localData.xmlTextures, "coord_num"))
pMeshContainer->dwNumCoords = (DWORD)atoi (szTemp);
}
pMeshContainer->dwNumPaintings = max (1, pMeshContainer->dwNumPaintings);
pMeshContainer->dwNumCoords = max (1, pMeshContainer->dwNumCoords);
if (pMeshContainer->dwNumPaintings <= m_localData.dwUseThisPainting)
m_localData.dwUseThisPainting = 0; // chyba, pozadovana painting-verzia nie je v xml definovana
//////////////////////////////////////////////////////////////////////////
// mesh cloning - tangent, binormal, tex. koordinaty - pocitaju sa len pre modely s viac ako jednou texturovou vrstvou
if (pMeshContainer->dwNumCoords > 1)
{
const DWORD dwRealNumCoords = (pMesh->GetFVF() & D3DFVF_TEXCOUNT_MASK) >> D3DFVF_TEXCOUNT_SHIFT;
const int intTexCoordsToAdd = pMeshContainer->dwNumCoords - dwRealNumCoords;
DWORD dwVertexStride = pMesh->GetNumBytesPerVertex ();
D3DVERTEXELEMENT9 meshDeclaration[MAX_FVF_DECL_SIZE];
if (SUCCEEDED (pMesh->GetDeclaration (meshDeclaration)))
{
DWORD dwNumDeclarations = 0;
for (i=0; (i < MAX_FVF_DECL_SIZE) && (meshDeclaration[i].Stream != 0xFF); i++)
dwNumDeclarations++;
// pridanie deklaracie pre tangent
meshDeclaration[dwNumDeclarations].Stream = 0;
meshDeclaration[dwNumDeclarations].Offset = (WORD)dwVertexStride;
meshDeclaration[dwNumDeclarations].Type = D3DDECLTYPE_FLOAT3;
meshDeclaration[dwNumDeclarations].Method = D3DDECLMETHOD_DEFAULT;
meshDeclaration[dwNumDeclarations].Usage = D3DDECLUSAGE_TANGENT;
meshDeclaration[dwNumDeclarations].UsageIndex = 0;
dwNumDeclarations++;
// pridanie deklaracie pre binormal
meshDeclaration[dwNumDeclarations].Stream = 0;
meshDeclaration[dwNumDeclarations].Offset = (WORD)(dwVertexStride + 3*sizeof(float));
meshDeclaration[dwNumDeclarations].Type = D3DDECLTYPE_FLOAT3;
meshDeclaration[dwNumDeclarations].Method = D3DDECLMETHOD_DEFAULT;
meshDeclaration[dwNumDeclarations].Usage = D3DDECLUSAGE_BINORMAL;
meshDeclaration[dwNumDeclarations].UsageIndex = 0;
dwNumDeclarations++;
// pridanie texturovych koordinatov
for (int k=0; k<intTexCoordsToAdd; k++)
{
meshDeclaration[dwNumDeclarations].Stream = 0;
meshDeclaration[dwNumDeclarations].Offset = (WORD)(dwVertexStride + 6*sizeof(float) + k*2*sizeof(float));
meshDeclaration[dwNumDeclarations].Type = D3DDECLTYPE_FLOAT2;
meshDeclaration[dwNumDeclarations].Method = D3DDECLMETHOD_DEFAULT;
meshDeclaration[dwNumDeclarations].Usage = D3DDECLUSAGE_TEXCOORD;
meshDeclaration[dwNumDeclarations].UsageIndex = BYTE(k + dwRealNumCoords);
dwNumDeclarations++;
}
// ukoncovaci element
memset (&meshDeclaration[dwNumDeclarations], 0, sizeof(D3DVERTEXELEMENT9));
meshDeclaration[dwNumDeclarations].Stream = 0xFF;
meshDeclaration[dwNumDeclarations].Type = D3DDECLTYPE_UNUSED;
if (FAILED (pMesh->CloneMesh (pMesh->GetOptions(), meshDeclaration, g_pD3DDevice, &pTempMesh)))
goto e_Exit;
pMesh->Release ();
pMesh = pTempMesh;
}
//////////////////////////////////////////////////////////////////////////
const DWORD dwVertexCount = pMesh->GetNumVertices ();
dwVertexStride = pMesh->GetNumBytesPerVertex ();
// uprava koordinatov, ak je to potrebne
for (i=dwRealNumCoords; i < pMeshContainer->dwNumCoords; i++)
{
LPVOID pData;
DWORD dwUseThisCoords = 0xFFFFFFFF,dwTexCoordOffsetSrc = 0xFFFFFFFF, dwTexCoordOffsetDst = 0xFFFFFFFF;
if (m_localData.xmlTextures)
{
ezxml_t pTextureTag, pCoordsTag;
const char *szTemp;
char szCoordsTag[16];
if (pTextureTag = g_pXML->Child (m_localData.xmlTextures, "texture0"))
{
sprintf (szCoordsTag, "coords%u", i);
if (pCoordsTag = g_pXML->Child (pTextureTag, szCoordsTag))
if (szTemp = g_pXML->Attr (pCoordsTag, "usecoords"))
{
dwUseThisCoords = (DWORD) atoi (szTemp);
if (dwUseThisCoords >= i) dwUseThisCoords = 0;
}
}
}
if ((i > dwRealNumCoords) && (dwUseThisCoords == 0xFFFFFFFF))
dwUseThisCoords = 0;
// ak je v xml definovany usecoords, tak kopirovat koordinaty
if (dwUseThisCoords != 0xFFFFFFFF)
{
for (j=0; (j < MAX_FVF_DECL_SIZE) && (meshDeclaration[j].Stream != 0xFF); j++)
if (meshDeclaration[j].Usage == D3DDECLUSAGE_TEXCOORD)
if (meshDeclaration[j].UsageIndex == dwUseThisCoords)
dwTexCoordOffsetSrc = meshDeclaration[j].Offset;
else if (meshDeclaration[j].UsageIndex == i)
dwTexCoordOffsetDst = meshDeclaration[j].Offset;
if ((dwTexCoordOffsetSrc == 0xFFFFFFFF) || (dwTexCoordOffsetDst == 0xFFFFFFFF))
continue; // chyba
if (SUCCEEDED (pMesh->LockVertexBuffer (0, &pData)))
{
LPBYTE pVertexData = (LPBYTE)pData;
// kopirovanie koordinatov z vrstvy dwUseThisCoords
for (j=0; j<dwVertexCount; j++)
{
memcpy ((pVertexData + dwTexCoordOffsetDst), (pVertexData + dwTexCoordOffsetSrc), 2*sizeof(float));
pVertexData += dwVertexStride;
}
pMesh->UnlockVertexBuffer ();
}
}
}
// vypocet tangent a binormal
if (!CalculateMeshTangents (pMesh, 1))
g_pConsole->Message(MSG_CON_ERR, "MeshLoader: CalculateMeshTangents() function failed");
}
//////////////////////////////////////////////////////////////////////////
// nacitanie informacii o materialoch a texturach z x suboru
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->pTextures = new LPDIRECT3DTEXTURE9 [pMeshContainer->NumMaterials * pMeshContainer->dwNumCoords * pMeshContainer->dwNumPaintings];
pMeshContainer->p7MTmaterials = new DWORD [pMeshContainer->NumMaterials];
if ((pMeshContainer->pMaterials == NULL) || (pMeshContainer->pTextures == NULL) || \
(pMeshContainer->p7MTmaterials == NULL))
{hr = E_OUTOFMEMORY; goto e_Exit;}
memset (pMeshContainer->pMaterials, 0, sizeof(D3DXMATERIAL) * pMeshContainer->NumMaterials);
memset (pMeshContainer->pTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials * pMeshContainer->dwNumCoords * pMeshContainer->dwNumPaintings);
memset (pMeshContainer->p7MTmaterials, 0xFF, sizeof(DWORD) * pMeshContainer->NumMaterials);
// nacitanie materialov
if (NumMaterials > 0)
{
for (i=0; i<NumMaterials; i++)
{
pMeshContainer->pMaterials[i].MatD3D = pMaterials[i].MatD3D;
// do x suboru sa neexportuje udaj o ambient zlozke materialov, upravit podla potreby
pMeshContainer->pMaterials[i].MatD3D.Ambient = D3DXCOLOR (1.0f, 1.0f, 1.0f, 1.0f);
// vypnut Power ak nie je zadana Specular zlozka
D3DCOLORVALUE &colorSpec = pMeshContainer->pMaterials[i].MatD3D.Specular;
if ((colorSpec.r == 0) && (colorSpec.g == 0) && (colorSpec.b == 0))
pMeshContainer->pMaterials[i].MatD3D.Power = 0.0f;
// nacitanie 7mt materialu, ak je k danemu povrchu priradeny
#define MATERIAL_FLOAT_TOLERANCE 0.001f
for (j=0; j < m_localData.dw7mtMaterialsNum; j++)
if (m_localData.Mesh7mtMaterials[j].sz7mtMaterialName != NULL)
{
// porovnanie textur ak su dostupne
if ((m_localData.Mesh7mtMaterials[j].szTextureName != NULL) && (pMaterials[i].pTextureFilename != NULL))
if (stricmp (m_localData.Mesh7mtMaterials[j].szTextureName, pMaterials[i].pTextureFilename) != 0)
continue;
// porovnanie materialov
if (fabs (m_localData.Mesh7mtMaterials[j].material.rDif - pMaterials[i].MatD3D.Diffuse.r) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.gDif - pMaterials[i].MatD3D.Diffuse.g) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.bDif - pMaterials[i].MatD3D.Diffuse.b) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.aDif - pMaterials[i].MatD3D.Diffuse.a) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.rSpec - pMaterials[i].MatD3D.Specular.r) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.gSpec - pMaterials[i].MatD3D.Specular.g) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.bSpec - pMaterials[i].MatD3D.Specular.b) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.rEm - pMaterials[i].MatD3D.Emissive.r) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.gEm - pMaterials[i].MatD3D.Emissive.g) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.bEm - pMaterials[i].MatD3D.Emissive.b) > MATERIAL_FLOAT_TOLERANCE) continue;
if (fabs (m_localData.Mesh7mtMaterials[j].material.specPower - pMaterials[i].MatD3D.Power) > MATERIAL_FLOAT_TOLERANCE) continue;
// materialy su zhodne
char szBuf[MAX_PATH] = "materials\\models\\";
strcat (szBuf, m_localData.Mesh7mtMaterials[j].sz7mtMaterialName);
// 7mt material loading
pMeshContainer->p7MTmaterials[i] = g_pMaterialManager->LoadMaterial (szBuf);
break;
}
// #######################################################
// naèítanie textúr
if ((pMaterials[i].pTextureFilename != NULL) && (pMaterials[i].pTextureFilename[0] != 0))
{
char szTag[16];
ezxml_t pTextureTag = NULL;
DWORD dwTextureIdx = 0xFFFFFFFF;
pMeshContainer->pMaterials[i].pTextureFilename = new char [strlen (pMaterials[i].pTextureFilename) + 1];
strcpy (pMeshContainer->pMaterials[i].pTextureFilename, pMaterials[i].pTextureFilename);
if (FindTextureIndexTagByName (m_localData.xmlTextures, pMaterials[i].pTextureFilename, dwTextureIdx))
{
sprintf (szTag, "texture%u", dwTextureIdx);
pTextureTag = g_pXML->Child (m_localData.xmlTextures, szTag);
}
for (j=0; j < pMeshContainer->dwNumCoords; j++) // pre jednotlive koordinaty
{
char szBuf[MAX_PATH] = "textures\\models\\";
if (pTextureTag == NULL) // pouzit texturu z x-suboru
{
strcat (szBuf, pMaterials[i].pTextureFilename);
pMeshContainer->pTextures[ i * pMeshContainer->dwNumCoords * pMeshContainer->dwNumPaintings + j*pMeshContainer->dwNumPaintings + m_localData.dwUseThisPainting] = g_TextureLoader.CreateTexture (szBuf);
}
else
{
// ziskanie nazvu textury z xml suboru
ezxml_t pCoordsTag, pPaintingTag;
sprintf (szTag, "coords%u", j);
if (pCoordsTag = g_pXML->Child (pTextureTag, szTag))
{
sprintf (szTag, "painting%u", m_localData.dwUseThisPainting);
if (pPaintingTag = g_pXML->Child (pCoordsTag, szTag))
if (pPaintingTag->txt)
{
strcat (szBuf, pPaintingTag->txt);
pMeshContainer->pTextures[ i * pMeshContainer->dwNumCoords * pMeshContainer->dwNumPaintings + j*pMeshContainer->dwNumPaintings + m_localData.dwUseThisPainting] = g_TextureLoader.CreateTexture (szBuf);
}
}
}
}
}
}
}
else // nastavenie defaultneho materialu - Diffuse = 0.8, Specular = Emissive = 0.0, Ambient = 1.0
{
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
pMeshContainer->pMaterials[0].MatD3D.Ambient = D3DXCOLOR (1.0f, 1.0f, 1.0f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Diffuse = D3DXCOLOR (0.8f, 0.8f, 0.8f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Emissive = D3DXCOLOR (0.0f, 0.0f, 0.0f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Emissive;
pMeshContainer->pMaterials[0].MatD3D.Power = 0.0f;
}
/*
// alokovanie pamäte pre materiály, textúry
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->pTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
if ((pMeshContainer->pMaterials == NULL) || (pMeshContainer->pTextures == NULL))
{hr = E_OUTOFMEMORY; goto e_Exit;}
//inicializácia textúr a materiálov
memset(pMeshContainer->pTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
memset(pMeshContainer->pMaterials, 0, sizeof(D3DXMATERIAL) * pMeshContainer->NumMaterials);
//ak sú dostupné materiály, tak sa kopírujú
if (NumMaterials > 0)
{
for (UINT iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
pMeshContainer->pMaterials[iMaterial].MatD3D = pMaterials[iMaterial].MatD3D;
pMeshContainer->pMaterials[iMaterial].MatD3D.Ambient = D3DXCOLOR (1.0f, 1.0f, 1.0f, 1.0f);
D3DCOLORVALUE &colorSpec = pMeshContainer->pMaterials[iMaterial].MatD3D.Specular;
if ((colorSpec.r == 0) && (colorSpec.g == 0) && (colorSpec.b == 0))
pMeshContainer->pMaterials[iMaterial].MatD3D.Power = 0.0f;
if (pMaterials[iMaterial].pTextureFilename != NULL)
{
wsprintf (szBuf, "textures\\models\\%s", pMaterials[iMaterial].pTextureFilename);
pMeshContainer->pTextures[iMaterial] = g_TextureLoader.CreateTexture (szBuf);
}
}
}
else // ak nie je definovany žiaden materiál, potom sa nastavý defaultný
{
//Diffuse = Specular = 0.8, Ambient = 1.0
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
pMeshContainer->pMaterials[0].MatD3D.Ambient = D3DXCOLOR (1.0f, 1.0f, 1.0f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Diffuse = D3DXCOLOR (0.8f, 0.8f, 0.8f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Emissive = D3DXCOLOR (0.0f, 0.0f, 0.0f, 1.0f);
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
pMeshContainer->pMaterials[0].MatD3D.Power = 5.0f;
}
*/
//////////////////////////////////////////////////////////////////////////
// nacitanie skin infa
if (m_localData.bLoadSkinInfo && (pSkinInfo != NULL))
{
DWORD dwNumBones;
pMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
// alokovanie pamate pre skin-info matice
dwNumBones = pSkinInfo->GetNumBones();
if (dwNumBones > 0)
{
pMeshContainer->pBoneInverseMatrices = new D3DXMATRIX[dwNumBones];
pMeshContainer->ppBoneTransformMatrices = new D3DXMATRIX*[dwNumBones];
if ((pMeshContainer->pBoneInverseMatrices == NULL) || \
(pMeshContainer->ppBoneTransformMatrices == NULL))
{hr = E_OUTOFMEMORY; goto e_Exit;}
// nacitanie bone-offset matic
for (DWORD iBone=0; iBone < dwNumBones; iBone++)
pMeshContainer->pBoneInverseMatrices[iBone] = *(pSkinInfo->GetBoneOffsetMatrix(iBone));
memset (pMeshContainer->ppBoneTransformMatrices, 0, sizeof(LPD3DXMATRIX) * dwNumBones);
}
//////////////////////////////////////////////////////////////////////////
// upravy pre shader skinning
pMeshContainer->NumPaletteEntries = min(MAX_SKIN_BONES, pMeshContainer->pSkinInfo->GetNumBones());
if (FAILED (pMeshContainer->pSkinInfo->ConvertToIndexedBlendedMesh (
pMesh,
D3DXMESH_MANAGED | D3DXMESHOPT_VERTEXCACHE,
pMeshContainer->NumPaletteEntries,
pAdjacency,
NULL, NULL, NULL,
&pMeshContainer->NumInfl,
&pMeshContainer->NumAttributeGroups,
&pMeshContainer->pBoneCombinationBuf,
&pTempMesh)))
goto e_Exit;
pMesh->Release ();
pMesh = pTempMesh;
pTempMesh = NULL;
}
//////////////////////////////////////////////////////////////////////////
// optimalizacia
#ifdef MAKE_MESH_OPTIMIZATION
if (pAdjacency)
{
// pMesh->GenerateAdjacency () // ???
pMesh->OptimizeInplace ( \
D3DXMESHOPT_COMPACT | D3DXMESHOPT_ATTRSORT | D3DXMESHOPT_VERTEXCACHE, \
pAdjacency, NULL, NULL, NULL);
}
#endif
//////////////////////////////////////////////////////////////////////////
pMeshContainer->MeshData.pMesh = pMesh;
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
*ppNewMeshContainer = pMeshContainer;
return S_OK;
e_Exit:
pMesh->Release ();
SAFE_DELETE (pMeshContainer)
return hr;
}
//-----------------------------------------------------------------------------
// Creates a new mesh container.
//-----------------------------------------------------------------------------
HRESULT AllocateHierarchy::CreateMeshContainer( THIS_ LPCSTR Name, CONST D3DXMESHDATA *pMeshData, CONST D3DXMATERIAL *pMaterials, CONST D3DXEFFECTINSTANCE *pEffectInstances, DWORD NumMaterials, CONST DWORD *pAdjacency, LPD3DXSKININFO pSkinInfo, LPD3DXMESHCONTAINER *ppNewMeshContainer )
{
// Create the new mesh container and zero its memory.
MeshContainer *meshContainer = new MeshContainer;
ZeroMemory( meshContainer, sizeof( MeshContainer ) );
// Copy the mesh's name.
if( Name == NULL )
{
// There is no name, so create a unique name.
static unsigned long nameCount = 0;
char newName[32];
sprintf( newName, "unknown_mesh_%d", nameCount );
nameCount++;
meshContainer->Name = new char[strlen( newName ) + 1];
strcpy( meshContainer->Name, newName );
}
else
{
meshContainer->Name = new char[strlen( Name ) + 1];
strcpy( meshContainer->Name, Name );
}
// Check if the mesh has any materials.
if( ( meshContainer->NumMaterials = NumMaterials ) > 0 )
{
// Allocate some memory for the mesh's materials, and their names (i.e. texture names).
meshContainer->materials = new Material*[meshContainer->NumMaterials];
meshContainer->materialNames = new char*[meshContainer->NumMaterials];
// Store all the material (texture) names.
for( unsigned long m = 0; m < NumMaterials; m++ )
{
if( pMaterials[m].pTextureFilename )
{
meshContainer->materialNames[m] = new char[strlen( pMaterials[m].pTextureFilename ) + 1];
memcpy( meshContainer->materialNames[m], pMaterials[m].pTextureFilename, ( strlen( pMaterials[m].pTextureFilename ) + 1 ) * sizeof( char ) );
}
else
meshContainer->materialNames[m] = NULL;
meshContainer->materials[m] = NULL;
}
}
// Store the mesh's adjacency information.
meshContainer->pAdjacency = new DWORD[pMeshData->pMesh->GetNumFaces() * 3];
memcpy( meshContainer->pAdjacency, pAdjacency, sizeof( DWORD ) * pMeshData->pMesh->GetNumFaces() * 3 );
// Store the mesh data.
meshContainer->MeshData.pMesh = meshContainer->originalMesh = pMeshData->pMesh;
meshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
pMeshData->pMesh->AddRef();
pMeshData->pMesh->AddRef();
// Check if this mesh is a skinned mesh.
if( pSkinInfo != NULL )
{
// Store the skin information and the mesh data.
meshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
// Clone the original mesh to create the skinned mesh.
meshContainer->originalMesh->CloneMeshFVF( D3DXMESH_MANAGED, meshContainer->originalMesh->GetFVF(), Engine::GetInstance()->GetDevice(), &meshContainer->MeshData.pMesh );
// Store the attribute table.
meshContainer->MeshData.pMesh->GetAttributeTable( NULL, &meshContainer->totalAttributeGroups );
meshContainer->attributeTable = new D3DXATTRIBUTERANGE[meshContainer->totalAttributeGroups];
meshContainer->MeshData.pMesh->GetAttributeTable( meshContainer->attributeTable, NULL );
}
*ppNewMeshContainer = meshContainer;
return S_OK;
}
HRESULT BoneHierarchyLoader::CreateMeshContainer(LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer) {
//Create new Bone Mesh
BoneMesh *boneMesh = new BoneMesh;
memset(boneMesh, 0, sizeof(BoneMesh));
//Get mesh data
boneMesh->OriginalMesh = pMeshData->pMesh;
boneMesh->MeshData.pMesh = pMeshData->pMesh;
boneMesh->MeshData.Type = pMeshData->Type;
pMeshData->pMesh->AddRef(); //Add Reference so that the mesh isnt deallocated
IDirect3DDevice9 *g_pDevice = NULL;
pMeshData->pMesh->GetDevice(&g_pDevice); //Get g_pDevice ptr from mesh
//Copy materials and load textures (just like with a static mesh)
for (int i=0; i<(int)NumMaterials; i++) {
D3DXMATERIAL mtrl;
memcpy(&mtrl, &pMaterials[i], sizeof(D3DXMATERIAL));
boneMesh->materials.push_back(mtrl.MatD3D);
IDirect3DTexture9* newTexture = NULL;
if (mtrl.pTextureFilename != NULL) {
char textureFname[200];
strcpy(textureFname, "resources/meshes/");
strcat(textureFname, mtrl.pTextureFilename);
//Load texture
D3DXCreateTextureFromFile(g_pDevice, textureFname, &newTexture);
}
boneMesh->textures.push_back(newTexture);
}
if (pSkinInfo != NULL) {
//Get Skin Info
boneMesh->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef(); //Add reference so that the SkinInfo isnt deallocated
//Clone mesh and store in boneMesh->MeshData.pMesh
pMeshData->pMesh->CloneMeshFVF(D3DXMESH_MANAGED, pMeshData->pMesh->GetFVF(),
g_pDevice, &boneMesh->MeshData.pMesh);
//Get Attribute Table
boneMesh->MeshData.pMesh->GetAttributeTable(NULL, &boneMesh->NumAttributeGroups);
boneMesh->attributeTable = new D3DXATTRIBUTERANGE[boneMesh->NumAttributeGroups];
boneMesh->MeshData.pMesh->GetAttributeTable(boneMesh->attributeTable, NULL);
//Create bone offset and current matrices
int NumBones = pSkinInfo->GetNumBones();
boneMesh->boneOffsetMatrices = new D3DXMATRIX[NumBones];
boneMesh->currentBoneMatrices = new D3DXMATRIX[NumBones];
//Get bone offset matrices
for (int i=0; i < NumBones; i++)
boneMesh->boneOffsetMatrices[i] = *(boneMesh->pSkinInfo->GetBoneOffsetMatrix(i));
}
//Set ppNewMeshContainer to the newly created boneMesh container
*ppNewMeshContainer = boneMesh;
return S_OK;
}
//====================================================================================
// メッシュコンテナの作成(XFileの各パーツの集合)ようはスキンメッシュモデルをここで作る
//====================================================================================
HRESULT CInheritanceHierarchy::CreateMeshContainer(LPCSTR Name, CONST D3DXMESHDATA* pMeshData,
CONST D3DXMATERIAL* pMaterials, CONST D3DXEFFECTINSTANCE* pEffectInstances,
DWORD NumMaterials, CONST DWORD *pAdjacency, LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppMeshContainer )
{
//========================================================================
// コンテナ作成に当たって必要な変数を用意
//========================================================================
MYMESHCONTAINER *pMeshContainer = NULL;
int iFacesAmount;
DWORD iMaterial;
LPDIRECT3DDEVICE9 pDevice = NULL;
LPD3DXMESH pMesh = NULL;
*ppMeshContainer = NULL;
DWORD dwBoneNum=0;
//========================================================================
// コンテナを動的確保して値を入れていく作業へ
//========================================================================
pMesh = pMeshData->pMesh;
pMeshContainer = new MYMESHCONTAINER;
//メモリ不足のときは終了
if (pMeshContainer == NULL)
{
return E_OUTOFMEMORY;
}
//作成に成功したら中身を0で初期化しておく
ZeroMemory(pMeshContainer, sizeof(MYMESHCONTAINER));
//メッシュコンテナとしてXFileでつけられてる名前を拾う
pMeshContainer->Name=new TCHAR[lstrlen(Name) + 1]; // \0分の+1
//名前がなかったらおかしいので終了
if (!pMeshContainer->Name)
{
return E_FAIL;
}
//名前があるならそれにする
strcpy(pMeshContainer->Name,Name);
// デバイスゲット
pMesh->GetDevice(&pDevice);
// 面の数ゲット
iFacesAmount = pMesh->GetNumFaces();
pMeshContainer->MeshData.pMesh = pMesh;
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
//通常メッシュの場合はこれが必要。スキンの場合、これをするとメモリリークになる。
if (pSkinInfo == NULL)
{
pMesh->AddRef();
}
//メッシュのマテリアル設定
pMeshContainer->NumMaterials = max(1, NumMaterials);
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->ppTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
pMeshContainer->pAdjacency = new DWORD[iFacesAmount * NUM_POLYGON_CREATE_TRIANGLE];
//隣接性情報またはマテリアルがなければ終了
if( pMeshContainer->pAdjacency == NULL
|| pMeshContainer->pMaterials == NULL )
{
return E_FAIL;
}
//情報をメッシュコンテナに流し込む
memcpy(pMeshContainer->pAdjacency, pAdjacency, sizeof(DWORD) * iFacesAmount * NUM_POLYGON_CREATE_TRIANGLE);
memset(pMeshContainer->ppTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
//========================================================================
//該当メッシュがスキン情報を持っている場合
//========================================================================
if (pSkinInfo != NULL)
{
pMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
dwBoneNum = pSkinInfo->GetNumBones();
pMeshContainer->pBoneOffsetMatrices = new D3DXMATRIX[dwBoneNum];
for (DWORD i = 0; i < dwBoneNum; i++)
{
memcpy(&pMeshContainer->pBoneOffsetMatrices[i], pMeshContainer->pSkinInfo->GetBoneOffsetMatrix(i), sizeof(D3DMATRIX));
}
// インデックスつきのものに変換 シェーダー使わないやつとは別なので注意
if (FAILED(pMeshContainer->pSkinInfo->ConvertToIndexedBlendedMesh(pMesh,
NULL,
dwBoneNum,
pMeshContainer->pAdjacency,
NULL,
NULL,
NULL,
&pMeshContainer->dwWeight,
&pMeshContainer->dwBoneNum,
&pMeshContainer->pBoneBuffer,
&pMeshContainer->MeshData.pMesh)))
{
return E_FAIL;
}
// コンバート
ConvertMesh(&pMeshContainer->MeshData.pMesh);
D3DVERTEXELEMENT9 elements[] =
{
// 頂点ストリーム(パイプライン)番号, オフセット(頂点の型の先頭からのバイト数), データ型, DEFAULTでＯＫ, 使用用途, 使用用途が同じものを複数使うときに仕分ける番号
{ 0, 0, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_POSITION, 0 },
{ 0, 12, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_BLENDWEIGHT, 0 },
{ 0, 24, D3DDECLTYPE_UBYTE4, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_BLENDINDICES, 0 },
{ 0, 28, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_NORMAL, 0 },
{ 0, 40, D3DDECLTYPE_FLOAT2, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_TEXCOORD, 0 },
{ 0, 48, D3DDECLTYPE_FLOAT4, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_COLOR, 0 },
D3DDECL_END() // 定義終了 絶対必要
};
pMeshContainer->pSkinInfo->SetDeclaration(elements);
}
//========================================================================
// モデルのマテリアル情報
//========================================================================
if (NumMaterials > 0)
{
memcpy(pMeshContainer->pMaterials, pMaterials, sizeof(D3DXMATERIAL) * NumMaterials);
for (iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
// マテリアルのディフーズ色を強制的に変更
pMeshContainer->pMaterials[iMaterial].MatD3D.Diffuse = DEFAULT_POLYGON_COLOR;
if (pMeshContainer->pMaterials[iMaterial].pTextureFilename != NULL)
{
TCHAR strTexturePath[MAX_PATH];
strcpy( strTexturePath,TEX_FOLDER_PATH);
strcat_s( strTexturePath, sizeof( char ) * MAX_LENGTH_FILE_PATH, pMeshContainer->pMaterials[iMaterial].pTextureFilename );
if (FAILED(D3DXCreateTextureFromFile(pDevice, strTexturePath,
&pMeshContainer->ppTextures[iMaterial])))
{
pMeshContainer->ppTextures[iMaterial] = NULL;
pMeshContainer->pMaterials[iMaterial].pTextureFilename = NULL;
}
}
}
}
else
{
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
memset(&pMeshContainer->pMaterials[0].MatD3D, 0, sizeof(D3DMATERIAL9));
pMeshContainer->pMaterials[0].MatD3D.Diffuse.r = COLOR_OF_NOT_EXIST_MATERIAL.r;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.g = COLOR_OF_NOT_EXIST_MATERIAL.g;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.b = COLOR_OF_NOT_EXIST_MATERIAL.b;
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
}
//ローカルに生成したメッシュコンテナーを呼び出し側にコピーする （コピーじゃないけど・・・）
*ppMeshContainer = pMeshContainer;
//参照カウンタを増やしたので減らす
SAFE_RELEASE(pDevice);
return S_OK;
}
void CShowPoints9::SetMesh(LPD3DXMESH pNewMesh, LPD3DXSKININFO pNewSkin)
{
HRESULT hr = S_OK;
NumPoints = 0;
UnskinnedVB.resize(0);
SAFE_RELEASE(SkinnedVB);
SAFE_RELEASE(Skin);
if(pNewMesh == NULL)
return;
IDirect3DDevice9* device = DXUTGetD3D9Device();
{//EFFECT
V( device->CreateVertexDeclaration( Elements, &Declaration ) );
ID3DXBuffer* pErrors = NULL;
V( SASCreateEffectFromResource(
device,
NULL, MAKEINTRESOURCE(IDR_SHOWLINES9FX), MAKEINTRESOURCE(RT_RCDATA),
NULL,
NULL,
0,
NULL,
&Effect,
&pErrors));
if(pErrors)
DXVGetApp().OutputA( (const char*)pErrors->GetBufferPointer() );
SAFE_RELEASE(pErrors);
}//EFFECT
D3DVERTEXELEMENT9 declIn[ MAX_FVF_DECL_SIZE ];
V( pNewMesh->GetDeclaration(declIn) );
int iPos= -1;
int iNorm= -1;
for( int i = 0 ;
declIn[i].Stream != 255 && i < MAX_FVF_DECL_SIZE;
i++)
{
if(declIn[i].Usage == D3DDECLUSAGE_POSITION && declIn[i].UsageIndex == 0)
iPos = i;
if(declIn[i].Usage == D3DDECLUSAGE_NORMAL && declIn[i].UsageIndex == 0)
iNorm = i;
}
if(iPos == -1 || iNorm == -1)
return;
if( (( declIn[iPos].Type & (D3DDECLTYPE_FLOAT3|D3DDECLTYPE_FLOAT4)) == 0 ) ||
(( declIn[iNorm].Type & (D3DDECLTYPE_FLOAT3|D3DDECLTYPE_FLOAT4)) == 0 ) )
return;
NumPoints = pNewMesh->GetNumVertices();
int MeshStride = pNewMesh->GetNumBytesPerVertex();
if(pNewSkin)
{
V( pNewSkin->Clone( &Skin ) );
V( Skin->SetDeclaration(Elements) );
}
//GET VERTEX DATA
BYTE* pSrcVB= NULL;
V( pNewMesh->LockVertexBuffer( D3DLOCK_READONLY, (LPVOID*)&pSrcVB ) );
UnskinnedVB.resize(pNewMesh->GetNumVertices());
for( DWORD iVert = 0; iVert < pNewMesh->GetNumVertices(); iVert++)
{
Vertex& v0 = UnskinnedVB[iVert];
v0.Position = *(D3DXVECTOR3*) (pSrcVB+(MeshStride*iVert)+declIn[iPos].Offset);
}
V( pNewMesh->UnlockVertexBuffer() );
V( device->CreateVertexBuffer( NumPoints*Stride , D3DUSAGE_WRITEONLY, 0, D3DPOOL_MANAGED, &SkinnedVB, NULL) );
//Fill in with initial values so unskinned meshes do not have to do this every render.
pSrcVB=(BYTE*)(void*)&UnskinnedVB.front();
BYTE* pDstVB=NULL;
V( SkinnedVB->Lock(0, 0, (void**)&pDstVB, 0 ) );
{
memcpy( pDstVB, pSrcVB, Stride*pNewMesh->GetNumVertices() );
}
V( SkinnedVB->Unlock() );
}
HRESULT AllocateHierarchy::CreateMeshContainer(
LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer)
{
HRESULT hr;
D3DXMESHCONTAINER_DERIVED *pMeshContainer = NULL;
UINT NumFaces;
UINT iMaterial;
UINT iBone, cBones;
LPDIRECT3DDEVICE9 pd3dDevice = NULL;
LPD3DXMESH pMesh = NULL;
*ppNewMeshContainer = NULL;
// this sample does not handle patch meshes, so fail when one is found
if (pMeshData->Type != D3DXMESHTYPE_MESH)
{
hr = E_FAIL;
goto e_Exit;
}
// get the pMesh interface pointer out of the mesh data structure
pMesh = pMeshData->pMesh;
// this sample does not FVF compatible meshes, so fail when one is found
if (pMesh->GetFVF() == 0)
{
hr = E_FAIL;
goto e_Exit;
}
// allocate the overloaded structure to return as a D3DXMESHCONTAINER
pMeshContainer = new D3DXMESHCONTAINER_DERIVED;
if (pMeshContainer == NULL)
{
hr = E_OUTOFMEMORY;
goto e_Exit;
}
memset(pMeshContainer, 0, sizeof(D3DXMESHCONTAINER_DERIVED));
// make sure and copy the name. All memory as input belongs to caller, interfaces can be addref'd though
hr = AllocateName(Name, &pMeshContainer->Name);
if (FAILED(hr))
goto e_Exit;
pMesh->GetDevice(&pd3dDevice);
NumFaces = pMesh->GetNumFaces();
// if no normals are in the mesh, add them
if (!(pMesh->GetFVF() & D3DFVF_NORMAL))
{
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
// clone the mesh to make room for the normals
hr = pMesh->CloneMeshFVF( pMesh->GetOptions(),
pMesh->GetFVF() | D3DFVF_NORMAL,
pd3dDevice, &pMeshContainer->MeshData.pMesh );
if (FAILED(hr))
goto e_Exit;
// get the new pMesh pointer back out of the mesh container to use
// NOTE: we do not release pMesh because we do not have a reference to it yet
pMesh = pMeshContainer->MeshData.pMesh;
// now generate the normals for the pmesh
D3DXComputeNormals( pMesh, NULL );
}
else // if no normals, just add a reference to the mesh for the mesh container
{
pMeshContainer->MeshData.pMesh = pMesh;
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
pMesh->AddRef();
}
// allocate memory to contain the material information. This sample uses
// the D3D9 materials and texture names instead of the EffectInstance style materials
pMeshContainer->NumMaterials = max(1, NumMaterials);
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->ppTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
pMeshContainer->pAdjacency = new DWORD[NumFaces*3];
if ((pMeshContainer->pAdjacency == NULL) || (pMeshContainer->pMaterials == NULL))
{
hr = E_OUTOFMEMORY;
goto e_Exit;
}
memcpy(pMeshContainer->pAdjacency, pAdjacency, sizeof(DWORD) * NumFaces*3);
memset(pMeshContainer->ppTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
// if materials provided, copy them
if (NumMaterials > 0)
{
memcpy(pMeshContainer->pMaterials, pMaterials, sizeof(D3DXMATERIAL) * NumMaterials);
for (iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
if (pMeshContainer->pMaterials[iMaterial].pTextureFilename != NULL)
{
string strTexturePath;
string strFilename = _pSkinmesh->GetMeshname();
strFilename = strFilename + "\\" + pMeshContainer->pMaterials[iMaterial].pTextureFilename;
strTexturePath = MODEL_DIR(strFilename.c_str());
if( FAILED( Moon_CreateTexture( pd3dDevice, const_cast<char*>(strTexturePath.c_str()),
&pMeshContainer->ppTextures[iMaterial] ) ) )
pMeshContainer->ppTextures[iMaterial] = NULL;
// don't remember a pointer into the dynamic memory, just forget the name after loading
pMeshContainer->pMaterials[iMaterial].pTextureFilename = NULL;
}
}
}
else // if no materials provided, use a default one
{
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
memset(&pMeshContainer->pMaterials[0].MatD3D, 0, sizeof(D3DMATERIAL9));
pMeshContainer->pMaterials[0].MatD3D.Diffuse.r = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.g = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.b = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
}
// if there is skinning information, save off the required data and then setup for HW skinning
if (pSkinInfo != NULL)
{
// first save off the SkinInfo and original mesh data
pMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
pMeshContainer->pOrigMesh = pMesh;
pMesh->AddRef();
// Will need an array of offset matrices to move the vertices from the figure space to the bone's space
cBones = pSkinInfo->GetNumBones();
pMeshContainer->pBoneOffsetMatrices = new D3DXMATRIX[cBones];
if (pMeshContainer->pBoneOffsetMatrices == NULL)
{
hr = E_OUTOFMEMORY;
goto e_Exit;
}
// get each of the bone offset matrices so that we don't need to get them later
for (iBone = 0; iBone < cBones; iBone++)
{
pMeshContainer->pBoneOffsetMatrices[iBone] = *(pMeshContainer->pSkinInfo->GetBoneOffsetMatrix(iBone));
}
// GenerateSkinnedMesh will take the general skinning information and transform it to a HW friendly version
hr = _pSkinmesh->GenerateSkinmesh(pMeshContainer);
if (FAILED(hr))
goto e_Exit;
}
*ppNewMeshContainer = pMeshContainer;
pMeshContainer = NULL;
e_Exit:
SAFE_RELEASE(pd3dDevice);
// call Destroy function to properly clean up the memory allocated
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
//======================================================================
// <<<メッシュ コンテナ オブジェクトの割り当て要求の実装>>>
// Name : [in] メッシュの名前
// pMeshData : [in] メッシュデータ構造体へのポインタ
// pMaterials : [in] メッシュに使うマテリアルの配列
// pEffectInstances : [in] メッシュに使うエフェクトインスタンスの配列
// NumMaterials : [in] マテリアル配列内のマテリアルの数
// pAdjacency : [in] メッシュの隣接性配列
// pSkinInfo : [in] スキンデータが見つかった場合のスキンメッシュオブジェクトへのポインタ
// ppNewMeshContainer : [out, retval] 作成されたメッシュコンテナを返す
//======================================================================
HRESULT CAllocateHierarchy::CreateMeshContainer( LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer)
{
HRESULT hr = S_OK;
*ppNewMeshContainer = NULL;
// patch meshes を扱う事はできない
if( pMeshData->Type != D3DXMESHTYPE_MESH )
{
return E_FAIL;
}
LPD3DXMESH pMesh = pMeshData->pMesh;
// FVF で記述されたメッシュ以外は読めぬ
if( pMesh->GetFVF() == 0 )
{
return E_FAIL;
}
UINT NumFaces = pMesh->GetNumFaces();
// メッシュ作成
CXMesh *pCXMesh = NULL;
try
{
pCXMesh = new CXMesh;
}
catch ( std::bad_alloc& )
{
// メモリが足りない
return E_OUTOFMEMORY;
}
// 名前設定
pCXMesh->SetName( Name );
// メッシュタイプ設定
pCXMesh->MeshData.Type = D3DXMESHTYPE_MESH;
LPDIRECT3DDEVICE9 pD3DDevice = NULL;
// デバイスを取得
if( FAILED( pMesh->GetDevice( &pD3DDevice ) ) )
{
hr = E_FAIL;
goto e_Exit;
}
// Xファイルに法線が無かったら計算で求める
if( !( pMesh->GetFVF() & D3DFVF_NORMAL ) )
{
////FVFに法線を追加した新しいメッシュにする////
hr = pMesh->CloneMeshFVF( pMesh->GetOptions(),
pMesh->GetFVF() | D3DFVF_NORMAL,
pD3DDevice, &pCXMesh->MeshData.pMesh );
if( FAILED( hr ) )
{
goto e_Exit;
}
// 引数で渡されたメッシュへのポインタに新しいメッシュへのポインタをセット
// pMeshへの参照はこの時点で存在しないので、ここではreleaseをかけない
pMesh = pCXMesh->MeshData.pMesh;
D3DXComputeNormals( pMesh, NULL );
}
// 法線があった
else
{
// リファレンスを増やすだけ
pCXMesh->MeshData.pMesh = pMesh;
pMesh->AddRef();
}
// マテリアル用のメモリを確保
pCXMesh->NumMaterials = max( 1, NumMaterials );
try
{
pCXMesh->pMaterials = new D3DXMATERIAL[pCXMesh->NumMaterials];
pCXMesh->m_ppTextures = new LPDIRECT3DTEXTURE9[pCXMesh->NumMaterials];
pCXMesh->pAdjacency = new DWORD[NumFaces * 3];
}
catch ( std::bad_alloc& )
{
// メモリが足りない
goto e_Exit;
}
memcpy( pCXMesh->pAdjacency, pAdjacency, sizeof( DWORD ) * NumFaces * 3 );
memset( pCXMesh->m_ppTextures, 0, sizeof( LPDIRECT3DTEXTURE9 ) * pCXMesh->NumMaterials );
// マテリアルのコピー
if( NumMaterials > 0 )
{
memcpy( pCXMesh->pMaterials, pMaterials, sizeof( D3DXMATERIAL ) * NumMaterials );
for( UINT i=0; i<NumMaterials; i++ )
{
if( pCXMesh->pMaterials[i].pTextureFilename != NULL )
{
// テクスチャを読み込む
if( FAILED( D3DXCreateTextureFromFileEx(
pD3DDevice, pCXMesh->pMaterials[i].pTextureFilename, D3DX_DEFAULT, D3DX_DEFAULT, D3DX_DEFAULT, D3DUSAGE_RENDERTARGET, D3DFMT_UNKNOWN, D3DPOOL_DEFAULT, D3DX_DEFAULT, D3DX_DEFAULT, m_KeyColor, NULL, NULL,
&pCXMesh->m_ppTextures[i] ) ) )
{
// 読み込み失敗
pCXMesh->m_ppTextures[i] = NULL;
}
pD3DDevice->SetTexture(0, pCXMesh->m_ppTextures[i]);
pD3DDevice->SetTextureStageState(0, D3DTSS_COLOROP, D3DTOP_MODULATE);
pD3DDevice->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_TEXTURE);
pD3DDevice->SetTextureStageState(0, D3DTSS_COLORARG2, D3DTA_DIFFUSE);
pD3DDevice->SetRenderState(D3DRS_ALPHABLENDENABLE, TRUE);
pD3DDevice->SetRenderState(D3DRS_ALPHATESTENABLE, true);
pD3DDevice->SetRenderState(D3DRS_ALPHAFUNC, D3DCMP_GREATER);
pD3DDevice->SetRenderState(D3DRS_ALPHAREF, 8);
}
}
}
// マテリアルが無いので適当にセット
else
{
pCXMesh->pMaterials[0].pTextureFilename = NULL;
memset( &pCXMesh->pMaterials[0].MatD3D, 0, sizeof( D3DMATERIAL9 ) );
pCXMesh->pMaterials[0].MatD3D.Diffuse.r = 0.5f;
pCXMesh->pMaterials[0].MatD3D.Diffuse.g = 0.5f;
pCXMesh->pMaterials[0].MatD3D.Diffuse.b = 0.5f;
pCXMesh->pMaterials[0].MatD3D.Specular = pCXMesh->pMaterials[0].MatD3D.Diffuse;
}
// ワンスキン形式のXファイルだった時の処理
if( pSkinInfo != NULL )
{
/* スキンメッシュ用の処理*/
/*pSkinInfo と pMesh をセット*/
pCXMesh->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
pCXMesh->m_pOrigMesh = pMesh;
pMesh->AddRef();
/* Bone Offset Matrices 保存用のメモリを確保*/
UINT NumBones = pSkinInfo->GetNumBones();
try
{
pCXMesh->m_pBoneOffsetMatrices = new D3DXMATRIX[NumBones];
}
catch ( std::bad_alloc& )
{
// メモリが足りない
goto e_Exit;
}
/*Bone Offset Matrices 読み込み*/
for( UINT i = 0; i < NumBones; i++ )
{
//memcpy(&pCXMesh->m_pBoneOffsetMatrices[i], pCXMesh->pSkinInfo->GetBoneOffsetMatrix(i), sizeof(D3DMATRIX) );
pCXMesh->m_pBoneOffsetMatrices[i] = *(pCXMesh->pSkinInfo->GetBoneOffsetMatrix( i ) );
}
// ジェネレート処理
hr = m_pModel->GenerateSkinnedMesh( m_pD3DX9, pCXMesh, m_MaxBlend );
if( FAILED( hr ) )
{
goto e_Exit;
}
}
// メッシュコンテナの割り当て。
// CXMeshクラスは D3DXMESHCONTAINER を継承している
*ppNewMeshContainer = pCXMesh;
pCXMesh = NULL;
e_Exit:
// 開放処理
F_RELEASE( pD3DDevice );
if( pCXMesh != NULL )
{
DestroyMeshContainer( pCXMesh );
}
return hr;
}
HRESULT CD3DAllocate::CreateMeshContainer(THIS_ LPCSTR name,
CONST D3DXMESHDATA *mesh, CONST D3DXMATERIAL *mats,
CONST D3DXEFFECTINSTANCE *effects, unsigned long numMats,
CONST unsigned long *indices, LPD3DXSKININFO skin,
LPD3DXMESHCONTAINER* outContainer)
{
stD3DContainerEx *meshCon = new stD3DContainerEx;
ZeroMemory(meshCon, sizeof(stD3DContainerEx));
*outContainer = NULL;
meshCon->Name = NULL;
if(name)
{
int len = strlen(name) + 1;
meshCon->Name = new char[len];
memcpy(meshCon->Name, name, len * sizeof(char));
}
if(mesh->Type != D3DXMESHTYPE_MESH)
{
// D3DXMESHTYPE_PMESH are progressive meshes.
// D3DXMESHTYPE_PATCHMESH are patch meshes.
// In this code we only handle normal meshes.
DestroyMeshContainer(meshCon);
return E_FAIL;
}
meshCon->MeshData.Type = D3DXMESHTYPE_MESH;
// Copy indices.
unsigned long numFaces = mesh->pMesh->GetNumFaces();
meshCon->pAdjacency = new unsigned long[numFaces * 3];
memcpy(meshCon->pAdjacency, indices, sizeof(unsigned long) * numFaces * 3);
// Get D3D Device.
LPDIRECT3DDEVICE9 d3dDevice = NULL;
mesh->pMesh->GetDevice(&d3dDevice);
// Get mesh's declaration.
D3DVERTEXELEMENT9 elements[MAX_FVF_DECL_SIZE];
if(FAILED(mesh->pMesh->GetDeclaration(elements)))
return E_FAIL;
// Clone mesh to get copy of mesh.
mesh->pMesh->CloneMesh(D3DXMESH_MANAGED, elements, d3dDevice,
&meshCon->MeshData.pMesh);
// Allocate materials and textures.
meshCon->NumMaterials = max(numMats, 1);
meshCon->mat = new D3DMATERIAL9[meshCon->NumMaterials];
meshCon->textures = new LPDIRECT3DTEXTURE9[meshCon->NumMaterials];
ZeroMemory(meshCon->mat, sizeof(D3DMATERIAL9) * meshCon->NumMaterials);
ZeroMemory(meshCon->textures, sizeof(LPDIRECT3DTEXTURE9) * meshCon->NumMaterials);
if(numMats > 0)
{
// If any materials get them and any textures.
for(unsigned long i = 0; i < numMats; ++i)
{
meshCon->textures[i] = NULL;
meshCon->mat[i] = mats[i].MatD3D;
if(mats[i].pTextureFilename)
{
if(FAILED(D3DXCreateTextureFromFile(d3dDevice, mats[i].pTextureFilename,
&meshCon->textures[i]))) meshCon->textures[i] = NULL;
}
}
}
else
{
// Set to default material and null texture.
ZeroMemory(&meshCon->mat[0], sizeof(D3DMATERIAL9));
meshCon->mat[0].Diffuse.r = 0.5f;
meshCon->mat[0].Diffuse.g = 0.5f;
meshCon->mat[0].Diffuse.b = 0.5f;
meshCon->mat[0].Specular = meshCon->mat[0].Diffuse;
meshCon->textures[0] = NULL;
}
// Nullify.
meshCon->pSkinInfo = NULL;
meshCon->boneMatrices = NULL;
if(skin)
{
// If skin mesh allocate and get bones.
meshCon->pSkinInfo = skin;
skin->AddRef();
unsigned int numBones = skin->GetNumBones();
meshCon->boneMatrices = new D3DXMATRIX*[numBones];
}
// Release reference count.
if(d3dDevice) d3dDevice->Release(); d3dDevice = NULL;
*outContainer = meshCon;
return S_OK;
}
HRESULT BoneHierarchyLoader::CreateMeshContainer( LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer )
{
BoneMesh* boneMesh = new BoneMesh();
// 메시 데이터를 얻는다.
// 소프트웨어 스키닝을 위해서는 메시의 원본 형태의 데이터를 보관해두어야한다.
boneMesh->_originalMesh = pMeshData->pMesh;
boneMesh->MeshData.pMesh = pMeshData->pMesh;
boneMesh->MeshData.Type = pMeshData->Type;
// 메시의 메모리가 해제되지 않도록 참조값을 증가시킨다
pMeshData->pMesh->AddRef();
LPDIRECT3DDEVICE9 device = nullptr;
pMeshData->pMesh->GetDevice( &device );
// materials, texture
for (int i = 0; i < NumMaterials; i++)
{
D3DXMATERIAL mtrl;
memcpy(&mtrl, &pMaterials[i], sizeof(D3DXMATERIAL));
boneMesh->_materials.push_back(mtrl.MatD3D);
/*IDirect3DTexture9* newTexture = nullptr;
if (mtrl.pTextureFilename != nullptr)
{
char texFileName[200] = "";
strcat(texFileName, mtrl.pTextureFilename);
D3DXCreateTextureFromFile(device, texFileName, &newTexture);
}
boneMesh->_textures.push_back(newTexture);*/
}
if (pSkinInfo != nullptr)
{
boneMesh->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
pMeshData->pMesh->CloneMeshFVF( D3DXMESH_MANAGED,
pMeshData->pMesh->GetFVF(),
device,
&boneMesh->MeshData.pMesh );
boneMesh->MeshData.pMesh->GetAttributeTable( nullptr, &boneMesh->_numAttributeGroups );
boneMesh->_attributeTable = new D3DXATTRIBUTERANGE[ boneMesh->_numAttributeGroups ];
boneMesh->MeshData.pMesh->GetAttributeTable( boneMesh->_attributeTable, nullptr );
int numBones = pSkinInfo->GetNumBones();
boneMesh->_boneOffsetMatrices = new D3DXMATRIX[ numBones ];
boneMesh->_currentBoneMatrices = new D3DXMATRIX[ numBones ];
for (int i = 0; i < numBones; i++)
{
boneMesh->_boneOffsetMatrices[ i ] = *(boneMesh->pSkinInfo->GetBoneOffsetMatrix( i ));
}
}
*ppNewMeshContainer = boneMesh;
return S_OK;
}
//メッシュコンテナの生成
HRESULT Dx_Hierarchy::CreateMeshContainer(
LPCTSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppMeshContainer )
{
HRESULT hr = S_OK;
//生成用オブジェクトの宣言
DxMeshContainer *pMeshContainer = NULL;
//生成したオブジェクトの登録先を初期化
*ppMeshContainer = NULL;
int iFacesAmount;
unsigned iMaterial;
LPDIRECT3DDEVICE9 pDevice = NULL;
LPD3DXMESH pMesh = NULL;
// patch meshes を扱う事はできない
//if( pMeshData->Type != D3DXMESHTYPE_MESH ) return E_FAIL;
// FVF で記述されたメッシュ以外は読めない
//if( pMesh->GetFVF() == 0 ) return E_FAIL;
//DWORD dwBoneAmt=0;
//メッシュデータの持つメッシュポインタを取得
pMesh = pMeshData->pMesh;
//オブジェクトの生成
pMeshContainer = new DxMeshContainer;
//変数がNULLだった場合
if (pMeshContainer == NULL)
{
//エラーの意味 : Direct3D が呼び出しを完了するための十分なメモリを割り当てることができませんでした。
return E_OUTOFMEMORY;
}
//
ZeroMemory(pMeshContainer, sizeof(DxMeshContainer));
//メッシュコンテナ名の領域確保
pMeshContainer->Name=new TCHAR[lstrlen(Name) + 1];
//領域が確保されなかった場合
if (!pMeshContainer->Name)
{
//エラーの意味 : Direct3D サブシステム内で原因不明のエラーが発生しました。
return E_FAIL;
}
//名前をコピーする
strcpy(pMeshContainer->Name,Name);
//メッシュに関連付けられているデバイスを取得
if(FAILED(pMesh->GetDevice(&pDevice)))
{
/*hr = E_FAIL;
SAFE_RELEASE( pDevice );
if( pMeshContainer ) DestroyMeshContainer( pMeshContainer );
return hr;*/
}
//メッシュに含まれる面の数を取得
iFacesAmount = pMesh->GetNumFaces();
// 当該メッシュが法線を持たない場合は法線を追加する
if (!(pMesh->GetFVF() & D3DFVF_NORMAL)) {
//メッシュデータの種類を「メッシュ」に変更
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
//FVFコードを使ってメッシュのコピーを生成
hr = pMesh->CloneMeshFVF( pMesh->GetOptions(),
pMesh->GetFVF() | D3DFVF_NORMAL,
pDevice, &pMeshContainer->MeshData.pMesh );
//処理が失敗した場合
if (FAILED(hr))
{
//エラーの意味 : Direct3D サブシステム内で原因不明のエラーが発生しました。
return E_FAIL;
}
pMesh = pMeshContainer->MeshData.pMesh;
//pMeshに含まれる各頂点の法線を計算して出力
D3DXComputeNormals( pMesh, NULL );
} else{
//メッシュコンテナ内のメッシュデータにメッシュポインタを設定
pMeshContainer->MeshData.pMesh = pMesh;
//メッシュデータの種類を「メッシュ」に設定
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
//???
pMesh->AddRef();
}
//メッシュのマテリアル設定
//マテリアル数を設定
pMeshContainer->NumMaterials = max(1, NumMaterials);
//マテリアルの数だけマテリアルの領域を確保
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
//マテリアルの数だけテクスチャの領域確保
pMeshContainer->ppTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
//面の数だけ領域を確保
pMeshContainer->pAdjacency = new DWORD[iFacesAmount*3];
//それぞれの領域確保に失敗した場合
if ((pMeshContainer->pAdjacency == NULL) || (pMeshContainer->pMaterials == NULL))
{
//エラーの意味 : Direct3D が呼び出しを完了するための十分なメモリを割り当てることができませんでした。
return E_OUTOFMEMORY;
}
//配列に0を設定
memset(pMeshContainer->ppTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
//配列にpAbjacencyを設定
memcpy(pMeshContainer->pAdjacency, pAdjacency, sizeof(DWORD) * iFacesAmount*3);
//マテリアルが存在する時
if (NumMaterials > 0)
{
//
memcpy(pMeshContainer->pMaterials, pMaterials, sizeof(D3DXMATERIAL) * NumMaterials);
//
for (iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
//テクスチャのファイル名が存在する場合
if( pMeshContainer->pMaterials[iMaterial].pTextureFilename != NULL)
{
//ファイルまでの相対パスを設定
char path[256] ="res/x/";
//ファイル名を取得
LPSTR fName = pMeshContainer->pMaterials[iMaterial].pTextureFilename;
//テクスチャ情報の生成
pMeshContainer->ppTextures[iMaterial] =
this->t_manager->LoadTextureFromFile(fName,path);
//テクスチャ名の破棄
pMeshContainer->pMaterials[iMaterial].pTextureFilename = NULL;
}
}
}
else
{
//テクスチャ名の破棄
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
//マテリアルに0を設定
memset(&pMeshContainer->pMaterials[0].MatD3D, 0, sizeof(D3DMATERIAL9));
//
pMeshContainer->pMaterials[0].MatD3D.Diffuse.r = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.g = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.b = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
}
//スキニング情報が存在する場合、ボーンを生成
if(pSkinInfo!=NULL)
{
//メッシュコンテナ内のスキニング情報を設定
pMeshContainer->pSkinInfo = pSkinInfo;
//???
pSkinInfo->AddRef();
//スキニング情報からボーンを生成
this->CreateBone(pMeshContainer,pDevice);
}
//ローカルに生成したメッシュコンテナを呼び出し側にコピーする
*ppMeshContainer = pMeshContainer;
//処理が無事に終了
return hr;
}
//ボーンの生成
HRESULT Dx_Hierarchy::CreateBone(DxMeshContainer *pMeshContainer,LPDIRECT3DDEVICE9 lpD3DDev)
{
DWORD dwBoneAmt=0;
LPD3DXSKININFO pSkinInfo = pMeshContainer->pSkinInfo;
pMeshContainer->lpMesh = pMeshContainer->MeshData.pMesh;
pMeshContainer->MeshData.pMesh->AddRef();
// Bone Offset Matrices 保存用のメモリを確保
dwBoneAmt = pSkinInfo->GetNumBones();
pMeshContainer->pBoneOffsetMatrices = new D3DXMATRIX[dwBoneAmt];
if( !pMeshContainer->pBoneOffsetMatrices ) return E_OUTOFMEMORY;
// Bone Offset Matrices 読み込み
for (DWORD i= 0; i < dwBoneAmt; i++){
memcpy(&pMeshContainer->pBoneOffsetMatrices[i],
pMeshContainer->pSkinInfo->GetBoneOffsetMatrix(i),sizeof(D3DMATRIX));
}
HRESULT hr = S_OK;
//スキン情報がないなら終了
if( !pMeshContainer->pSkinInfo ) return hr;
//初期化しておく
if(pMeshContainer->MeshData.pMesh) SAFE_RELEASE( pMeshContainer->MeshData.pMesh );
if(pMeshContainer->pBoneCombinationBuf) SAFE_RELEASE( pMeshContainer->pBoneCombinationBuf );
hr = pMeshContainer->lpMesh->CloneMeshFVF(
D3DXMESH_MANAGED, pMeshContainer->lpMesh->GetFVF(),
lpD3DDev , &pMeshContainer->MeshData.pMesh );
if( FAILED( hr ) ) return hr;
//メッシュコンテナに所属している頂点数の取得
hr = pMeshContainer->MeshData.pMesh->GetAttributeTable( NULL, &pMeshContainer->NumAttributeGroups );
if( FAILED( hr ) ) return hr;
//メッシュコンテナに所属している頂点情報の格納
delete[] pMeshContainer->pAttributeTable;
pMeshContainer->pAttributeTable = new D3DXATTRIBUTERANGE[pMeshContainer->NumAttributeGroups];
if( !pMeshContainer->pAttributeTable ){
hr = E_OUTOFMEMORY;
return hr;
}
hr = pMeshContainer->MeshData.pMesh->GetAttributeTable(pMeshContainer->pAttributeTable, NULL );
if( FAILED( hr ) ) return hr;
// 他のメッシュによってボーン行列用のメモリが確保しきれていない場合は確保
if( pMeshContainer->NumBoneMatricesMax < pMeshContainer->pSkinInfo->GetNumBones() ){
pMeshContainer->NumBoneMatricesMax = pMeshContainer->pSkinInfo->GetNumBones();
delete []pMeshContainer->pBoneMatrices;
pMeshContainer->pBoneMatrices = new D3DXMATRIXA16[pMeshContainer->NumBoneMatricesMax];
if( !pMeshContainer->pBoneMatrices ){
hr = E_OUTOFMEMORY;
return hr;
}
}
return hr;
}