Пример #1
0
FunctionMinimum VariableMetricBuilder::minimum(const MnFcn& fcn,
    const GradientCalculator& gc, const MinimumSeed& seed,
    const MnStrategy& strategy, unsigned int maxfcn, double edmval) const {
    using namespace std;
    edmval *= 0.0001;
    if(VariableMetricBuilder::print_level >= 1)
        cout << "======================================" << endl;

#ifdef DEBUG
    std::cout<<"VariableMetricBuilder convergence when edm < "<<edmval<<std::endl;
#endif

    if(seed.parameters().vec().size() == 0) {
        return FunctionMinimum(seed, fcn.up());
    }


//   double edm = estimator().estimate(seed.gradient(), seed.error());
    double edm = seed.state().edm();

    FunctionMinimum min(seed, fcn.up() );

    if(edm < 0.) {
        std::cout<<"VariableMetricBuilder: initial matrix not pos.def."<<std::endl;
        //assert(!seed.error().isPosDef());
        return min;
    }

    std::vector<MinimumState> result;
    //result.reserve(1);
    result.reserve(8);

    result.push_back( seed.state() );

    // do actual iterations


    // try first with a maxfxn = 80% of maxfcn
    int maxfcn_eff = maxfcn;
    int ipass = 0;

    //start timer
    start = time(NULL);
    absolute_maxfcn = maxfcn;
    do {


        min = minimum(fcn, gc, seed, result, maxfcn_eff, edmval);
        // second time check for validity of function minimum
        if (ipass > 0) {
            if(!min.isValid()) {
                std::cout<<"FunctionMinimum is invalid."<<std::endl;
                return min;
            }
        }

        // resulting edm of minimization
        edm = result.back().edm();

        if( (strategy.strategy() == 2) ||
            (strategy.strategy() == 1 && min.error().dcovar() > 0.05) ) {

            #ifdef DEBUG
                std::cout<<"MnMigrad will verify convergence and error matrix. "<< std::endl;
                std::cout<<"dcov is =  "<<  min.error().dcovar() << std::endl;
            #endif

            MinimumState st = MnHesse(strategy)(fcn, min.state(), min.seed().trafo());
            result.push_back( st );

            // check edm
            edm = st.edm();
            #ifdef DEBUG
                std::cout << "edm after Hesse calculation " << edm << std::endl;
            #endif
            if (edm > edmval) {
                std::cout << "VariableMetricBuilder: Tolerance is not sufficient - edm is " << edm << " requested " << edmval
                << " continue the minimization" << std::endl;
            }
            min.add( result.back() );
        }

        // end loop on iterations
        // ? need a maximum here (or max of function calls is enough ? )
        // continnue iteration (re-calculate funciton minimum if edm IS NOT sufficient)
        // no need to check that hesse calculation is done (if isnot done edm is OK anyway)
        // count the pass to exit second time when function minimum is invalid
        // increase by 20% maxfcn for doing some more tests
        if (ipass == 0) maxfcn_eff = int(maxfcn*1.3);
        if(VariableMetricBuilder::print_level >= 1){
            printProgress(fcn);
            min.print();
        }
        ipass++;
    }  while (edm > edmval );
    //add hessian calculation back
    min.add( result.back() );
    return min;
}
Пример #2
0
MinimumState MnHesse::operator()(const MnFcn& mfcn, const MinimumState& st, const MnUserTransformation& trafo, unsigned int maxcalls) const {

  const MnMachinePrecision& prec = trafo.precision();
  // make sure starting at the right place
  double amin = mfcn(st.vec());
  double aimsag = sqrt(prec.eps2())*(fabs(amin)+mfcn.up());
  
  // diagonal elements first

  unsigned int n = st.parameters().vec().size();
  if(maxcalls == 0) maxcalls = 200 + 100*n + 5*n*n;

  MnAlgebraicSymMatrix vhmat(n);
  MnAlgebraicVector g2 = st.gradient().g2();
  MnAlgebraicVector gst = st.gradient().gstep();
  MnAlgebraicVector grd = st.gradient().grad();
  MnAlgebraicVector dirin = st.gradient().gstep();
  MnAlgebraicVector yy(n);
  if(st.gradient().isAnalytical()) {
    InitialGradientCalculator igc(mfcn, trafo, theStrategy);
    FunctionGradient tmp = igc(st.parameters());
    gst = tmp.gstep();
    dirin = tmp.gstep();
    g2 = tmp.g2();
  }

  MnAlgebraicVector x = st.parameters().vec(); 

  for(unsigned int i = 0; i < n; i++) {

    double xtf = x(i);
    double dmin = 8.*prec.eps2()*(fabs(xtf) + prec.eps2());
    double d = fabs(gst(i));
    if(d < dmin) d = dmin;

    for(unsigned int icyc = 0; icyc < ncycles(); icyc++) {
      double sag = 0.;
      double fs1 = 0.;
      double fs2 = 0.;
      for(unsigned int multpy = 0; multpy < 5; multpy++) {
	x(i) = xtf + d;
	fs1 = mfcn(x);
	x(i) = xtf - d;
	fs2 = mfcn(x);
	x(i) = xtf;
	sag = 0.5*(fs1+fs2-2.*amin);
	if(sag > prec.eps2()) goto L30; // break;
	if(trafo.parameter(i).hasLimits()) {
	  if(d > 0.5) goto L26;
	  d *= 10.;
	  if(d > 0.5) d = 0.51;
	  continue;
	}
	d *= 10.;
      }
      
L26:  
      std::cout<<"MnHesse: 2nd derivative zero for parameter "<<i<<std::endl;
      std::cout<<"MnHesse fails and will return diagonal matrix "<<std::endl;

      for(unsigned int j = 0; j < n; j++) {
	double tmp = g2(j) < prec.eps2() ? 1. : 1./g2(j);
	vhmat(j,j) = tmp < prec.eps2() ? 1. : tmp;
      }

      return MinimumState(st.parameters(), MinimumError(vhmat, MinimumError::MnHesseFailed()), st.gradient(), st.edm(), mfcn.numOfCalls());

L30:      
      double g2bfor = g2(i);
      g2(i) = 2.*sag/(d*d);
      grd(i) = (fs1-fs2)/(2.*d);
      gst(i) = d;
      dirin(i) = d;
      yy(i) = fs1;
      double dlast = d;
      d = sqrt(2.*aimsag/fabs(g2(i)));
      if(trafo.parameter(i).hasLimits()) d = std::min(0.5, d);
      if(d < dmin) d = dmin;

      // see if converged
      if(fabs((d-dlast)/d) < tolerstp()) break;
      if(fabs((g2(i)-g2bfor)/g2(i)) < tolerg2()) break; 
      d = std::min(d, 10.*dlast);
      d = std::max(d, 0.1*dlast);   
    }
    vhmat(i,i) = g2(i);
    if(mfcn.numOfCalls()  > maxcalls) {
      //std::cout<<"maxcalls " << maxcalls << " " << mfcn.numOfCalls() << "  " <<   st.nfcn() << std::endl;
      std::cout<<"MnHesse: maximum number of allowed function calls exhausted."<<std::endl;  
      std::cout<<"MnHesse fails and will return diagonal matrix "<<std::endl;
      for(unsigned int j = 0; j < n; j++) {
	double tmp = g2(j) < prec.eps2() ? 1. : 1./g2(j);
	vhmat(j,j) = tmp < prec.eps2() ? 1. : tmp;
      }
      
      return MinimumState(st.parameters(), MinimumError(vhmat, MinimumError::MnHesseFailed()), st.gradient(), st.edm(), mfcn.numOfCalls());
    }
    
  }

  if(theStrategy.strategy() > 0) {
    // refine first derivative
    HessianGradientCalculator hgc(mfcn, trafo, theStrategy);
    FunctionGradient gr = hgc(st.parameters(), FunctionGradient(grd, g2, gst));
    grd = gr.grad();
  }

  //off-diagonal elements  
  for(unsigned int i = 0; i < n; i++) {
    x(i) += dirin(i);
    for(unsigned int j = i+1; j < n; j++) {
      x(j) += dirin(j);
      double fs1 = mfcn(x);
      double elem = (fs1 + amin - yy(i) - yy(j))/(dirin(i)*dirin(j));
      vhmat(i,j) = elem;
      x(j) -= dirin(j);
    }
    x(i) -= dirin(i);
  }
  
  //verify if matrix pos-def (still 2nd derivative)
  MinimumError tmp = MnPosDef()(MinimumError(vhmat,1.), prec);
  vhmat = tmp.invHessian();
  int ifail = invert(vhmat);
  if(ifail != 0) {
    std::cout<<"MnHesse: matrix inversion fails!"<<std::endl;
    std::cout<<"MnHesse fails and will return diagonal matrix."<<std::endl;

    MnAlgebraicSymMatrix tmpsym(vhmat.nrow());
    for(unsigned int j = 0; j < n; j++) {
      double tmp = g2(j) < prec.eps2() ? 1. : 1./g2(j);
      tmpsym(j,j) = tmp < prec.eps2() ? 1. : tmp;
    }

    return MinimumState(st.parameters(), MinimumError(tmpsym, MinimumError::MnHesseFailed()), st.gradient(), st.edm(), mfcn.numOfCalls());
  }
  
  FunctionGradient gr(grd, g2, gst);

  // needed this ? (if posdef and inversion ok continue. it is like this in the Fortran version
//   if(tmp.isMadePosDef()) {
//     std::cout<<"MnHesse: matrix is invalid!"<<std::endl;
//     std::cout<<"MnHesse: matrix is not pos. def.!"<<std::endl;
//     std::cout<<"MnHesse: matrix was forced pos. def."<<std::endl;
//     return MinimumState(st.parameters(), MinimumError(vhmat, MinimumError::MnMadePosDef()), gr, st.edm(), mfcn.numOfCalls());    
//   }

  //calculate edm
  MinimumError err(vhmat, 0.);
  VariableMetricEDMEstimator estim;
  double edm = estim.estimate(gr, err);

  return MinimumState(st.parameters(), err, gr, edm, mfcn.numOfCalls());
}
Пример #3
0
FunctionMinimum VariableMetricBuilder::minimum(const MnFcn& fcn,
    const GradientCalculator& gc, const MinimumSeed& seed,
    std::vector<MinimumState>& result, unsigned int maxfcn, double edmval) const {


    const MnMachinePrecision& prec = seed.precision();


//   result.push_back(MinimumState(seed.parameters(), seed.error(), seed.gradient(), edm, fcn.numOfCalls()));
    const MinimumState & initialState = result.back();


    double edm = initialState.edm();


    #ifdef DEBUG
        std::cout << "\n\nDEBUG Variable Metric Builder  \nInitial State: "
        << " Parameter " << initialState.vec()
        << " Gradient " << initialState.gradient().vec()
        << " Inv Hessian " << initialState.error().invHessian()
        << " edm = " << initialState.edm() << std::endl;
    #endif



// iterate until edm is small enough or max # of iterations reached
    edm *= (1. + 3.*initialState.error().dcovar());
    MnLineSearch lsearch;
    MnAlgebraicVector step(initialState.gradient().vec().size());
// keep also prevStep
    MnAlgebraicVector prevStep(initialState.gradient().vec().size());

    do {

//     const MinimumState& s0 = result.back();
        MinimumState s0 = result.back();

        step = -1.*s0.error().invHessian()*s0.gradient().vec();

        #ifdef DEBUG
                std::cout << "\n\n---> Iteration - " << result.size()
                << "\nFval = " << s0.fval() << " numOfCall = " << fcn.numOfCalls()
                << "\nInternal Parameter values " << s0.vec()
                << " Newton step " << step << std::endl;
        #endif


        double gdel = inner_product(step, s0.gradient().grad());
        if(gdel > 0.) {
            std::cout<<"VariableMetricBuilder: matrix not pos.def."<<std::endl;
            std::cout<<"gdel > 0: "<<gdel<<std::endl;
            MnPosDef psdf;
            s0 = psdf(s0, prec);
            step = -1.*s0.error().invHessian()*s0.gradient().vec();
            // #ifdef DEBUG
            //       std::cout << "After MnPosdef - error  " << s0.error().invHessian() << " gradient " << s0.gradient().vec() << " step " << step << std::endl;
            // #endif
            gdel = inner_product(step, s0.gradient().grad());
            std::cout<<"gdel: "<<gdel<<std::endl;
            if(gdel > 0.) {
                result.push_back(s0);
                return FunctionMinimum(seed, result, fcn.up());
            }
        }
        MnParabolaPoint pp = lsearch(fcn, s0.parameters(), step, gdel, prec);
        if(fabs(pp.y() - s0.fval()) < fabs(s0.fval())*prec.eps() ) {
            if(VariableMetricBuilder::print_level>=1){
                std::cout<<"VariableMetricBuilder: warning: no improvement in line search  " << std::endl;
            }
            // no improvement exit   (is it really needed LM ? in vers. 1.22 tried alternative )
            break;
        }

#ifdef DEBUG
        std::cout << "Result after line search : \nx = " << pp.x()
        << "\nOld Fval = " << s0.fval()
        << "\nNew Fval = " << pp.y()
        << "\nNFcalls = " << fcn.numOfCalls() << std::endl;
#endif

        MinimumParameters p(s0.vec() + pp.x()*step, pp.y());


        FunctionGradient g = gc(p, s0.gradient());


        edm = estimator().estimate(g, s0.error());


        if(edm < 0.) {
            std::cout<<"VariableMetricBuilder: matrix not pos.def."<<std::endl;
            std::cout<<"edm < 0"<<std::endl;
            MnPosDef psdf;
            s0 = psdf(s0, prec);
            edm = estimator().estimate(g, s0.error());
            if(edm < 0.) {
                result.push_back(s0);
                return FunctionMinimum(seed, result, fcn.up());
            }
        }
        MinimumError e = errorUpdator().update(s0, p, g);

#ifdef DEBUG
        std::cout << "Updated new point: \n "
        << " Parameter " << p.vec()
        << " Gradient " << g.vec()
        << " InvHessian " << e.matrix()
        << " Hessian " << e.hessian()
        << " edm = " << edm << std::endl << std::endl;
#endif


        result.push_back(MinimumState(p, e, g, edm, fcn.numOfCalls()));

        // correct edm
        edm *= (1. + 3.*e.dcovar());

#ifdef DEBUG
        std::cout << "edm corrected = " << edm << std::endl;
#endif
        FunctionMinimum tmp(seed, result, fcn.up());
        if(VariableMetricBuilder::print_level >= 2){
            printProgress(fcn);
            tmp.print(true);
        }
    } while(edm > edmval && fcn.numOfCalls() < maxfcn);

    if(fcn.numOfCalls() >= maxfcn) {
        std::cout<<"VariableMetricBuilder: call limit exceeded."<<std::endl;
        return FunctionMinimum(seed, result, fcn.up(), FunctionMinimum::MnReachedCallLimit());
    }

    if(edm > edmval) {
        if(edm < fabs(prec.eps2()*result.back().fval())) {
            std::cout<<"VariableMetricBuilder: machine accuracy limits further improvement."<<std::endl;
            return FunctionMinimum(seed, result, fcn.up());
        } else if(edm < 10.*edmval) {
            return FunctionMinimum(seed, result, fcn.up());
        } else {
            std::cout<<"VariableMetricBuilder: finishes without convergence."<<std::endl;
            std::cout<<"VariableMetricBuilder: edm= "<<edm<<" requested: "<<edmval<<std::endl;
            return FunctionMinimum(seed, result, fcn.up(), FunctionMinimum::MnAboveMaxEdm());
        }
    }
    //std::cout<<"result.back().error().dcovar()= "<<result.back().error().dcovar()<<std::endl;

#ifdef DEBUG
    std::cout << "Exiting succesfully Variable Metric Builder \n"
    << "NFCalls = " << fcn.numOfCalls()
    << "\nFval = " <<  result.back().fval()
    << "\nedm = " << edm << " requested = " << edmval << std::endl;
#endif

    return FunctionMinimum(seed, result, fcn.up());
}