OsSocket* SipTlsServer::buildClientSocket(int hostPort, const char* hostAddress, const char* localIp, bool& existingSocketReused)
{
OsSocket* socket;
socket = new OsSSLConnectionSocket(hostPort, hostAddress);
socket->makeBlocking();
existingSocketReused = false;
return(socket);
}
/**
* Open datagram socket and send a few bytes.
*
* NOTE: This can/will fail if /etc/hosts defines localhost as ::1 (as
* opposed to 127.0.0.1).
*/
void testWriteMsg()
{
OsSocket* s = new OsDatagramSocket(8020, "localhost");
const char* msg = "hello\n";
int len = strlen(msg);
int bytesWritten = s->write(msg, len);
CPPUNIT_ASSERT_EQUAL_MESSAGE("write correct number of bytes",
bytesWritten, len);
s->close();
delete s;
}
/**
* Start a client and server and send 2 messages over TCP thru them
*
* NOTE: This can/will fail if /etc/hosts defines localhost as ::1 (as
* opposed to 127.0.0.1).
*/
void testWriteAndAcceptMsg()
{
// Create/Verify Sockets
OsServerSocket* server = new OsServerSocket(50, 8021);
KNOWN_BUG("This can fail if there is a port conflict on the test system", "XECS-1924");
CPPUNIT_ASSERT_MESSAGE("server socket failure",
server->isOk());
OsSocket* client = new OsConnectionSocket(8021, "localhost");
CPPUNIT_ASSERT_MESSAGE("client socket failure",
client->isOk());
OsSocket* serverClient = server->accept(1000);
CPPUNIT_ASSERT_MESSAGE("socket server failed to accept connection",
serverClient != NULL);
// Begin read/write test
const char* msg = "hello\n";
int len = strlen(msg) + 1; // +1 for NULL
int bytesWritten = client->write(msg, len);
CPPUNIT_ASSERT_EQUAL_MESSAGE("write correct number of bytes",
bytesWritten, len);
char recvBuf[1024];
int bytesRead = serverClient->read(recvBuf, sizeof(recvBuf) - 1);
CPPUNIT_ASSERT_EQUAL_MESSAGE("read correct number of bytes",
len, bytesRead);
ASSERT_STR_EQUAL_MESSAGE("message same as was sent", msg, recvBuf);
const char *resp = "bye";
len = strlen(resp) + 1; // +1 for NULL
bytesWritten = serverClient->write(resp, len);
CPPUNIT_ASSERT_EQUAL_MESSAGE("write correct number of bytes on 2nd msg",
len, bytesWritten);
bytesRead = client->read(recvBuf, sizeof(recvBuf) - 1);
CPPUNIT_ASSERT_EQUAL_MESSAGE("read correct number of bytes on 2nd msg",
len, bytesRead);
CPPUNIT_ASSERT_EQUAL_MESSAGE("write correct number of bytes on 2nd msg",
len, bytesWritten);
ASSERT_STR_EQUAL_MESSAGE("2nd message same as was sent",
resp, recvBuf);
serverClient->close();
client->close();
server->close();
delete client;
delete server;
}
OsSocket* SipTlsServer::buildClientSocket(int hostPort, const char* hostAddress, const char* localIp)
{
OsSocket* socket = NULL;
#ifdef SIP_TLS
# ifdef SIP_TLS_NSS
socket = new OsTLSClientConnectionSocket(hostPort, hostAddress, mCertNickname, mCertPassword, mDbLocation, 0, localIp, mSipUserAgent);
# else
socket = new OsSSLConnectionSocket(hostPort, hostAddress);
# endif
#else
// Create the socket in non-blocking mode so it does not block
// while conecting
socket = new OsConnectionSocket(hostPort, hostAddress, FALSE, localIp);
#endif
if (socket)
{
socket->makeBlocking();
}
return(socket);
}
int SipLSendCommand::execute(int argc, char* argv[])
{
int commandStatus = CommandProcessor::COMMAND_FAILED;
UtlString messageBuffer;
char buffer[1025];
int bufferSize = 1024;
int charsRead;
printf("send command with %d arguments\n", argc);
if(argc != 5)
{
UtlString usage;
getUsage(argv[0], &usage);
printf("%s", usage.data());
}
else
{
UtlString protocol(argv[2]);
protocol.toUpper();
UtlString hostAddress(argv[3]);
int hostPort = atoi(argv[4]);
FILE* sipMessageFile = fopen(argv[1], "r");
if(sipMessageFile && hostPort > 0 && !hostAddress.isNull() &&
(protocol.compareTo("TCP") == 0 || protocol.compareTo("UDP") == 0))
{
//printf("opened file: \"%s\"\n", argv[1]);
do
{
charsRead = fread(buffer, 1, bufferSize, sipMessageFile);
if(charsRead > 0)
{
messageBuffer.append(buffer, charsRead);
}
}
while(charsRead);
fclose(sipMessageFile);
OsSocket* writeSocket = NULL;
if(protocol.compareTo("TCP") == 0)
writeSocket = new OsConnectionSocket(hostPort ,hostAddress);
else if(protocol.compareTo("UDP") == 0)
writeSocket = new OsDatagramSocket(hostPort ,hostAddress);
//printf("Read file contents:\n%s\n====END====\n", messageBuffer.data());
//SipMessage message(messageBuffer.data());
int bytesSent;
if((bytesSent = writeSocket->write(messageBuffer.data(),
messageBuffer.length())) > 0)
{
commandStatus = CommandProcessor::COMMAND_SUCCESS;
}
else
{
printf("Failed to send SIP message");
}
printf("Send message with %d bytes\n", bytesSent);
}
else if(!sipMessageFile)
{
printf("send file: \"%s\" does not exist\n", argv[1]);
commandStatus = CommandProcessor::COMMAND_FAILED;
}
else if(hostPort <= 0)
{
printf("Invalid destination port: %s\n", argv[4]);
commandStatus = CommandProcessor::COMMAND_FAILED;
}
else if(hostAddress.isNull())
{
printf("Invalid destination address: %s\n", argv[3]);
commandStatus = CommandProcessor::COMMAND_FAILED;
}
else if(protocol.compareTo("TCP") && protocol.compareTo("UDP"))
{
printf("Invalid protocol: %s\n", argv[2]);
commandStatus = CommandProcessor::COMMAND_FAILED;
}
}
return(commandStatus);
}
SipClient* SipProtocolServerBase::createClient(const char* hostAddress,
int hostPort,
const char* localIp)
{
UtlString remoteHostAddr;
UtlBoolean clientStarted = FALSE;
mClientLock.acquireWrite();
SipClient* client = getClient(hostAddress, hostPort, localIp);
if(! client)
{
# if TEST_CLIENT_CREATION
OsSysLog::add(FAC_SIP, PRI_DEBUG, "SipProtocolServerBase::createClient( %s, %d )",
hostAddress, hostPort);
# endif
if(!portIsValid(hostPort))
{
hostPort = mDefaultPort;
# if TEST_CLIENT_CREATION
OsSysLog::add(FAC_SIP, PRI_DEBUG,
"SipProtocolServerBase::createClient port defaulting to %d",
hostPort);
# endif
}
OsTime time;
OsDateTime::getCurTimeSinceBoot(time);
long beforeSecs = time.seconds();
OsSocket* clientSocket = buildClientSocket(hostPort, hostAddress, localIp);
OsDateTime::getCurTimeSinceBoot(time);
long afterSecs = time.seconds();
if(afterSecs - beforeSecs > 1)
{
OsSysLog::add(FAC_SIP, PRI_WARNING, "SIP %s socket create for %s:%d took %d seconds",
mProtocolString.data(), hostAddress, hostPort,
(int)(afterSecs - beforeSecs));
}
UtlBoolean isOk = clientSocket->isOk();
int writeWait = 3000; // mSec
UtlBoolean isReadyToWrite = clientSocket->isReadyToWrite(writeWait);
if(!isReadyToWrite)
{
OsSysLog::add(FAC_SIP, PRI_WARNING,
"SIP %s socket %s:%d not ready for writing after %d seconds",
mProtocolString.data(), hostAddress, hostPort, (int) (writeWait/1000));
}
if(isOk &&
isReadyToWrite)
{
#ifdef TEST
osPrintf("Socket OK, creating client\n");
#endif
client = new SipClient(clientSocket) ;
if (client && mSipUserAgent->getUseRport() &&
clientSocket->getIpProtocol() == OsSocket::UDP)
{
client->setSharedSocket(TRUE) ;
}
#ifdef TEST
osPrintf("Created client\n");
#endif
if(mSipUserAgent)
{
client->setUserAgent(mSipUserAgent);
}
if (clientSocket->getIpProtocol() != OsSocket::UDP)
{
//osPrintf("starting client\n");
clientStarted = client->start();
if(!clientStarted)
{
osPrintf("SIP %s client failed to start\n",
mProtocolString.data());
}
}
OsSysLog::add(FAC_SIP, PRI_DEBUG, "Sip%sServer::createClient client: %p %s -> %s:%d",
mProtocolString.data(), client, localIp, hostAddress, hostPort);
mClientList.push(client);
}
// The socket failed to be connected
else
{
if(clientSocket)
{
if (!mSipUserAgent->getUseRport() ||
(clientSocket->getIpProtocol() == OsSocket::TCP))
{
delete clientSocket;
}
clientSocket = NULL;
}
OsSysLog::add(FAC_SIP, PRI_WARNING,
"Sip%sServer::createClient client %p Failed to create socket %s -> %s:%d",
mProtocolString.data(), this, localIp, hostAddress, hostPort);
}
}
int isBusy = FALSE;
if(client)
{
isBusy = client->isInUseForWrite();
if(!isBusy)
client->markInUseForWrite();
}
mClientLock.releaseWrite();
if(client && isBusy)
{
if(!waitForClientToWrite(client)) client = NULL;
}
return(client);
}
main(int argc, char* argv[])
#endif
{
PT_TEST_BEGIN;
OsSocket* s = new OsDatagramSocket(8020, "localhost");
char* msg = "hello\n";
int len = strlen(msg);
int bytesWritten = s->write(msg, len);
char recvBuf[RECV_BUF_LEN];
char eMsg[100];
char* resp;
OsServerSocket* server = NULL;
OsSocket* client = NULL;
OsSocket* serverClient = NULL;
int bytesRead;
printf("wrote UDP %d of %d bytes\n", bytesWritten, len);
PT_TEST_ASSERT(len == bytesWritten,
"OsDatagramSOcket::write failed to write correct number of bytes",
PT_TEST_CONTINUE);
s->close();
delete s;
server = new OsServerSocket(50, 8080);
client = new OsConnectionSocket(8080, "localhost");
serverClient = server->accept();
PT_TEST_ASSERT(serverClient != NULL,
"socket server failed to accept connection",
PT_TEST_ABORT);
bytesWritten = client->write(msg, len);
sprintf(eMsg, "wrote TCP %d of %d bytes", bytesWritten, len);
PT_TEST_ASSERT(len == bytesWritten, eMsg, PT_TEST_CONTINUE);
bytesRead = serverClient->read(recvBuf, RECV_BUF_LEN - 1);
if(bytesRead > 0)
{
recvBuf[bytesRead] = '\0';
printf("received %d of %d butes: \"%s\"\n", bytesRead, len, recvBuf);
}
PT_TEST_ASSERT(len == bytesRead, eMsg, PT_TEST_CONTINUE);
PT_TEST_ASSERT(strcmp(msg, recvBuf) == 0, "message is not the same as was sent",
PT_TEST_CONTINUE);
resp = "bye";
len = strlen(resp);
bytesWritten = serverClient->write(resp, len);
sprintf(eMsg, "wrote TCP %d of %d bytes", bytesWritten, len);
PT_TEST_ASSERT(len == bytesWritten, eMsg, PT_TEST_CONTINUE);
bytesRead = client->read(recvBuf, RECV_BUF_LEN - 1);
if(bytesRead > 0)
{
recvBuf[bytesRead] = '\0';
printf("received %d of %d butes: \"%s\"\n", bytesRead, len, recvBuf);
}
PT_TEST_ASSERT(len == bytesRead, eMsg, PT_TEST_CONTINUE);
PT_TEST_ASSERT(strcmp(resp, recvBuf) == 0, "response is not the same as was sent",
PT_TEST_CONTINUE);
serverClient->close();
client->close();
server->close();
delete serverClient;
delete client;
delete server;
// Note: no semicolon
PT_TEST_END
}