void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
const wxPoint& aOffset )
{
wxSize mask_margin; // margin (clearance) used for some non copper layers
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
int showActualMaskSize = 0; /* Layer number if the actual pad size on mask layer can
* be displayed i.e. if only one layer is shown for this pad
* and this layer is a mask (solder mask or solder paste
*/
#endif
if( m_Flags & DO_NOT_DRAW )
return;
PAD_DRAWINFO drawInfo;
drawInfo.m_Offset = aOffset;
/* We can show/hide pads from the layer manager.
* options are show/hide pads on front and/or back side of the board
* For through pads, we hide them only if both sides are hidden.
* smd pads on back are hidden for all layers (copper and technical layers)
* on back side of the board
* smd pads on front are hidden for all layers (copper and technical layers)
* on front side of the board
* ECO, edge and Draw layers and not considered
*/
BOARD* brd = GetBoard();
bool frontVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_FR_VISIBLE ) );
bool backVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_BK_VISIBLE ) );
if( !frontVisible && !backVisible )
return;
// If pad is only on front side (no layer on back side)
// and if hide front side pads is enabled, do not draw
if( !frontVisible && !( m_layerMask & LSET::BackMask() ).any() )
return;
// If pad is only on back side (no layer on front side)
// and if hide back side pads is enabled, do not draw
if( !backVisible && !( m_layerMask & LSET::FrontMask() ).any() )
return;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
wxCHECK_RET( frame != NULL, wxT( "Panel has no parent frame window." ) );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)frame->GetDisplayOptions();
PCB_SCREEN* screen = frame->GetScreen();
if( displ_opts && displ_opts->m_DisplayPadFill == SKETCH )
drawInfo.m_ShowPadFilled = false;
else
drawInfo.m_ShowPadFilled = true;
EDA_COLOR_T color = BLACK;
if( m_layerMask[F_Cu] )
{
color = brd->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_layerMask[B_Cu] )
{
color = ColorMix( color, brd->GetVisibleElementColor( PAD_BK_VISIBLE ) );
}
if( color == BLACK ) // Not on a visible copper layer (i.e. still nothing to show)
{
// If the pad is on only one tech layer, use the layer color else use DARKGRAY
LSET mask_non_copper_layers = m_layerMask & ~LSET::AllCuMask();
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
mask_non_copper_layers &= brd->GetVisibleLayers();
#endif
LAYER_ID pad_layer = mask_non_copper_layers.ExtractLayer();
switch( (int) pad_layer )
{
case UNDEFINED_LAYER: // More than one layer
color = DARKGRAY;
break;
case UNSELECTED_LAYER: // Shouldn't really happen...
break;
default:
color = brd->GetLayerColor( pad_layer );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = pad_layer;
#endif
}
}
// if SMD or connector pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
displ_opts && displ_opts->m_ContrastModeDisplay )
{
// when routing tracks
if( frame->GetToolId() == ID_TRACK_BUTT )
{
LAYER_ID routeTop = screen->m_Route_Layer_TOP;
LAYER_ID routeBot = screen->m_Route_Layer_BOTTOM;
// if routing between copper and component layers,
// or the current layer is one of said 2 external copper layers,
// then highlight only the current layer.
if( ( screen->m_Active_Layer == F_Cu || screen->m_Active_Layer == B_Cu ) ||
( routeTop==F_Cu && routeBot==B_Cu ) ||
( routeTop==B_Cu && routeBot==F_Cu )
)
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}
// else routing between an internal signal layer and some other
// layer. Grey out all PAD_SMD pads not on current or the single
// selected external layer.
else if( !IsOnLayer( screen->m_Active_Layer )
&& !IsOnLayer( routeTop )
&& !IsOnLayer( routeBot ) )
{
ColorTurnToDarkDarkGray( &color );
}
}
// when not edting tracks, show PAD_SMD components not on active layer
// as greyed out
else
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}
}
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
if( showActualMaskSize )
{
switch( showActualMaskSize )
{
case B_Mask:
case F_Mask:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case B_Paste:
case F_Paste:
mask_margin = GetSolderPasteMargin();
break;
default:
// Another layer which has no margin to handle
break;
}
}
#endif
// if Contrast mode is ON and a technical layer active, show pads on this
// layer so we can see pads on paste or solder layer and the size of the
// mask
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
displ_opts && displ_opts->m_ContrastModeDisplay && !IsCopperLayer( screen->m_Active_Layer ) )
{
if( IsOnLayer( screen->m_Active_Layer ) )
{
color = brd->GetLayerColor( screen->m_Active_Layer );
// In high contrast mode, and if the active layer is the mask
// layer shows the pad size with the mask clearance
switch( screen->m_Active_Layer )
{
case B_Mask:
case F_Mask:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case B_Paste:
case F_Paste:
mask_margin = GetSolderPasteMargin();
break;
default:
break;
}
}
else
color = DARKDARKGRAY;
}
if( aDraw_mode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDraw_mode & GR_AND) );
ColorApplyHighlightFlag( &color );
bool DisplayIsol = displ_opts && displ_opts->m_DisplayPadIsol;
if( !( m_layerMask & LSET::AllCuMask() ).any() )
DisplayIsol = false;
if( ( GetAttribute() == PAD_HOLE_NOT_PLATED ) &&
brd->IsElementVisible( NON_PLATED_VISIBLE ) )
{
drawInfo.m_ShowNotPlatedHole = true;
drawInfo.m_NPHoleColor = brd->GetVisibleElementColor( NON_PLATED_VISIBLE );
}
drawInfo.m_DrawMode = aDraw_mode;
drawInfo.m_Color = color;
drawInfo.m_DrawPanel = aPanel;
drawInfo.m_Mask_margin = mask_margin;
drawInfo.m_ShowNCMark = brd->IsElementVisible( PCB_VISIBLE( NO_CONNECTS_VISIBLE ) );
drawInfo.m_IsPrinting = screen->m_IsPrinting;
SetAlpha( &color, 170 );
/* Get the pad clearance. This has a meaning only for Pcbnew.
* for CvPcb GetClearance() creates debug errors because
* there is no net classes so a call to GetClearance() is made only when
* needed (never needed in CvPcb)
*/
drawInfo.m_PadClearance = DisplayIsol ? GetClearance() : 0;
// Draw the pad number
if( displ_opts && !displ_opts->m_DisplayPadNum )
drawInfo.m_Display_padnum = false;
if( displ_opts &&
(( displ_opts ->m_DisplayNetNamesMode == 0 ) || ( displ_opts->m_DisplayNetNamesMode == 2 )) )
drawInfo.m_Display_netname = false;
// Display net names is restricted to pads that are on the active layer
// in high contrast mode display
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
!IsOnLayer( screen->m_Active_Layer ) && displ_opts && displ_opts->m_ContrastModeDisplay )
drawInfo.m_Display_netname = false;
DrawShape( aPanel->GetClipBox(), aDC, drawInfo );
}
void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, int aDraw_mode, const wxPoint& aOffset )
{
int color = 0;
wxSize mask_margin; // margin (clearance) used for some non copper layers
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
int showActualMaskSize = 0; /* Layer number if the actual pad size on mask layer can
* be displayed i.e. if only one layer is shown for this pad
* and this layer is a mask (solder mask or sloder paste
*/
#endif
if( m_Flags & DO_NOT_DRAW )
return;
PAD_DRAWINFO drawInfo;
drawInfo.m_Offset = aOffset;
/* We can show/hide pads from the layer manager.
* options are show/hide pads on front and/or back side of the board
* For through pads, we hide them only if both sides are hidden.
* smd pads on back are hidden for all layers (copper and technical layers)
* on back side of the board
* smd pads on front are hidden for all layers (copper and technical layers)
* on front side of the board
* ECO, edge and Draw layers and not considered
*/
// Mask layers for Back side of board
#define BACK_SIDE_LAYERS \
(LAYER_BACK | ADHESIVE_LAYER_BACK | SOLDERPASTE_LAYER_BACK \
| SILKSCREEN_LAYER_BACK | SOLDERMASK_LAYER_BACK)
// Mask layers for Front side of board
#define FRONT_SIDE_LAYERS \
(LAYER_FRONT | ADHESIVE_LAYER_FRONT | SOLDERPASTE_LAYER_FRONT \
| SILKSCREEN_LAYER_FRONT | SOLDERMASK_LAYER_FRONT)
BOARD* brd = GetBoard();
bool frontVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_FR_VISIBLE ) );
bool backVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_BK_VISIBLE ) );
if( !frontVisible && !backVisible )
return;
/* If pad are only on front side (no layer on back side)
* and if hide front side pads is enabled, do not draw
*/
if( !frontVisible && ( (m_layerMask & BACK_SIDE_LAYERS) == 0 ) )
return;
/* If pad are only on back side (no layer on front side)
* and if hide back side pads is enabled, do not draw
*/
if( !backVisible && ( (m_layerMask & FRONT_SIDE_LAYERS) == 0 ) )
return;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
if( frame->m_DisplayPadFill == FILLED )
drawInfo.m_ShowPadFilled = true;
else
drawInfo.m_ShowPadFilled = false;
if( m_layerMask & LAYER_FRONT )
{
color = brd->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_layerMask & LAYER_BACK )
{
color |= brd->GetVisibleElementColor( PAD_BK_VISIBLE );
}
if( color == 0 ) /* Not on copper layer */
{
// If the pad in on only one tech layer, use the layer color else use DARKGRAY
int mask_non_copper_layers = m_layerMask & ~ALL_CU_LAYERS;
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
mask_non_copper_layers &= brd->GetVisibleLayers();
#endif
switch( mask_non_copper_layers )
{
case 0:
break;
case ADHESIVE_LAYER_BACK:
color = brd->GetLayerColor( ADHESIVE_N_BACK );
break;
case ADHESIVE_LAYER_FRONT:
color = brd->GetLayerColor( ADHESIVE_N_FRONT );
break;
case SOLDERPASTE_LAYER_BACK:
color = brd->GetLayerColor( SOLDERPASTE_N_BACK );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = SOLDERPASTE_N_BACK;
#endif
break;
case SOLDERPASTE_LAYER_FRONT:
color = brd->GetLayerColor( SOLDERPASTE_N_FRONT );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = SOLDERPASTE_N_FRONT;
#endif
break;
case SILKSCREEN_LAYER_BACK:
color = brd->GetLayerColor( SILKSCREEN_N_BACK );
break;
case SILKSCREEN_LAYER_FRONT:
color = brd->GetLayerColor( SILKSCREEN_N_FRONT );
break;
case SOLDERMASK_LAYER_BACK:
color = brd->GetLayerColor( SOLDERMASK_N_BACK );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = SOLDERMASK_N_BACK;
#endif
break;
case SOLDERMASK_LAYER_FRONT:
color = brd->GetLayerColor( SOLDERMASK_N_FRONT );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = SOLDERMASK_N_FRONT;
#endif
break;
case DRAW_LAYER:
color = brd->GetLayerColor( DRAW_N );
break;
case COMMENT_LAYER:
color = brd->GetLayerColor( COMMENT_N );
break;
case ECO1_LAYER:
color = brd->GetLayerColor( ECO1_N );
break;
case ECO2_LAYER:
color = brd->GetLayerColor( ECO2_N );
break;
case EDGE_LAYER:
color = brd->GetLayerColor( EDGE_N );
break;
default:
color = DARKGRAY;
break;
}
}
// if PAD_SMD pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
DisplayOpt.ContrastModeDisplay )
{
// when routing tracks
if( frame && frame->GetToolId() == ID_TRACK_BUTT )
{
int routeTop = screen->m_Route_Layer_TOP;
int routeBot = screen->m_Route_Layer_BOTTOM;
// if routing between copper and component layers,
// or the current layer is one of said 2 external copper layers,
// then highlight only the current layer.
if( ( ( 1 << routeTop ) | ( 1 << routeBot ) ) == ( LAYER_BACK | LAYER_FRONT )
|| ( ( 1 << screen->m_Active_Layer ) & ( LAYER_BACK | LAYER_FRONT ) ) )
{
if( !IsOnLayer( screen->m_Active_Layer ) )
{
color &= ~MASKCOLOR;
color |= DARKDARKGRAY;
}
}
// else routing between an internal signal layer and some other
// layer. Grey out all PAD_SMD pads not on current or the single
// selected external layer.
else if( !IsOnLayer( screen->m_Active_Layer )
&& !IsOnLayer( routeTop )
&& !IsOnLayer( routeBot ) )
{
color &= ~MASKCOLOR;
color |= DARKDARKGRAY;
}
}
// when not edting tracks, show PAD_SMD components not on active layer
// as greyed out
else
{
if( !IsOnLayer( screen->m_Active_Layer ) )
{
color &= ~MASKCOLOR;
color |= DARKDARKGRAY;
}
}
}
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
if( showActualMaskSize )
{
switch( showActualMaskSize )
{
case SOLDERMASK_N_BACK:
case SOLDERMASK_N_FRONT:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case SOLDERPASTE_N_BACK:
case SOLDERPASTE_N_FRONT:
mask_margin = GetSolderPasteMargin();
break;
default:
break;
}
}
#endif
// if Contrast mode is ON and a technical layer active, show pads on this
// layer so we can see pads on paste or solder layer and the size of the
// mask
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
DisplayOpt.ContrastModeDisplay && screen->m_Active_Layer > LAST_COPPER_LAYER )
{
if( IsOnLayer( screen->m_Active_Layer ) )
{
color = brd->GetLayerColor( screen->m_Active_Layer );
// In hight contrast mode, and if the active layer is the mask
// layer shows the pad size with the mask clearance
switch( screen->m_Active_Layer )
{
case SOLDERMASK_N_BACK:
case SOLDERMASK_N_FRONT:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case SOLDERPASTE_N_BACK:
case SOLDERPASTE_N_FRONT:
mask_margin = GetSolderPasteMargin();
break;
default:
break;
}
}
else
color = DARKDARKGRAY;
}
if( aDraw_mode & GR_HIGHLIGHT )
{
if( aDraw_mode & GR_AND )
color &= ~HIGHLIGHT_FLAG;
else
color |= HIGHLIGHT_FLAG;
}
if( color & HIGHLIGHT_FLAG )
color = ColorRefs[color & MASKCOLOR].m_LightColor;
bool DisplayIsol = DisplayOpt.DisplayPadIsol;
if( ( m_layerMask & ALL_CU_LAYERS ) == 0 )
DisplayIsol = false;
if( GetAttribute() == PAD_HOLE_NOT_PLATED )
drawInfo.m_ShowNotPlatedHole = true;
drawInfo.m_DrawMode = aDraw_mode;
drawInfo.m_Color = color;
drawInfo.m_DrawPanel = aPanel;
drawInfo.m_Mask_margin = mask_margin;
drawInfo.m_ShowNCMark = brd->IsElementVisible( PCB_VISIBLE( NO_CONNECTS_VISIBLE ) );
drawInfo.m_IsPrinting = screen->m_IsPrinting;
SetAlpha( &color, 170 );
/* Get the pad clearance. This has a meaning only for Pcbnew.
* for CvPcb (and GerbView) GetClearance() creates debug errors because
* there is no net classes so a call to GetClearance() is made only when
* needed (never needed in CvPcb nor in GerbView)
*/
drawInfo.m_PadClearance = DisplayIsol ? GetClearance() : 0;
/* Draw the pad number */
if( frame && !frame->m_DisplayPadNum )
drawInfo.m_Display_padnum = false;
if( ( DisplayOpt.DisplayNetNamesMode == 0 ) || ( DisplayOpt.DisplayNetNamesMode == 2 ) )
drawInfo.m_Display_netname = false;
// Display net names is restricted to pads that are on the active layer
// in hight contrast mode display
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
!IsOnLayer( screen->m_Active_Layer ) && DisplayOpt.ContrastModeDisplay )
drawInfo.m_Display_netname = false;
DrawShape( aPanel->GetClipBox(), aDC, drawInfo );
}