int32_t serial_recv_stream_dma (serial_t *obj, char *prxbuf, uint32_t len)
{
PHAL_RUART_OP pHalRuartOp;
PHAL_RUART_ADAPTER pHalRuartAdapter=(PHAL_RUART_ADAPTER)&(obj->hal_uart_adp);
u8 uart_idx = pHalRuartAdapter->UartIndex;
int32_t ret;
pHalRuartOp = &(obj->hal_uart_op);
if ((serial_dma_en[uart_idx] & SERIAL_RX_DMA_EN)==0) {
PUART_DMA_CONFIG pHalRuartDmaCfg;
pHalRuartDmaCfg = &obj->uart_gdma_cfg;
#if 0
pHalRuartOp->HalRuartRxGdmaLoadDef (pHalRuartAdapter, pHalRuartDmaCfg);
pHalRuartOp->HalRuartDmaInit (pHalRuartAdapter);
InterruptRegister(&pHalRuartDmaCfg->RxGdmaIrqHandle);
InterruptEn(&pHalRuartDmaCfg->RxGdmaIrqHandle);
serial_dma_en[uart_idx] |= SERIAL_RX_DMA_EN;
#else
if (HAL_OK == HalRuartRxGdmaInit(pHalRuartOp, pHalRuartAdapter, pHalRuartDmaCfg)) {
serial_dma_en[uart_idx] |= SERIAL_RX_DMA_EN;
}
else {
return HAL_BUSY;
}
#endif
}
ret = pHalRuartOp->HalRuartDmaRecv(pHalRuartAdapter, (u8*)prxbuf, len);
return (ret);
}
/**
* Load UART HAL GDMA default setting
*
* Call this function to load the default setting for UART GDMA
*
*
*/
VOID
HalRuartRxGdmaInit(
PRUART_ADAPTER pRuartAdapter
)
{
PHAL_RUART_OP pHalRuartOp;
PHAL_RUART_ADAPTER pHalRuartAdapter;
PUART_DMA_CONFIG pUartGdmaConfig;
PHAL_GDMA_ADAPTER pHalGdmaAdapter;
if (NULL == pRuartAdapter) {
return;
}
pHalRuartOp = pRuartAdapter->pHalRuartOp;
pHalRuartAdapter = pRuartAdapter->pHalRuartAdapter;
pUartGdmaConfig = pRuartAdapter->pHalRuartDmaCfg;
if ((NULL == pHalRuartOp) || (NULL == pHalRuartAdapter) || (NULL == pUartGdmaConfig)) {
return;
}
// Load default setting
if (pHalRuartOp->HalRuartRxGdmaLoadDef != NULL) {
HalGdmaOpInit((VOID*) (pUartGdmaConfig->pHalGdmaOp));
pHalRuartOp->HalRuartRxGdmaLoadDef (pHalRuartAdapter, pUartGdmaConfig);
}
else {
// Initial your GDMA setting here
}
// Start to patch the default setting
pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pUartGdmaConfig->pRxHalGdmaAdapter;
pHalGdmaAdapter->GdmaIndex = 0; // GDMA1
pHalGdmaAdapter->ChNum = 5; // GDMA Channel
pHalGdmaAdapter->ChEn = GdmaCh5; // GDMA Channel Enable
// pUartGdmaConfig->RxGdmaIrqHandle.Data = pHalRuartAdapter;
pUartGdmaConfig->RxGdmaIrqHandle.IrqNum = GDMA0_CHANNEL5_IRQ;
// pUartGdmaConfig->RxGdmaIrqHandle.IrqFun = (IRQ_FUN)_UartTxDmaIrqHandle;
pUartGdmaConfig->RxGdmaIrqHandle.Priority = 0x20;
pHalRuartOp->HalRuartDmaInit (pHalRuartAdapter);
InterruptRegister(&pUartGdmaConfig->RxGdmaIrqHandle);
InterruptEn(&pUartGdmaConfig->RxGdmaIrqHandle);
}