void FOOTPRINT_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
assert( aItemsList.GetPickedItem( 0 )->GetParent()->Type() == PCB_MODULE_T );
MODULE* owner = static_cast<MODULE*>( aItemsList.GetPickedItem( 0 )->GetParent() );
#ifndef NDEBUG
// All items should have the same parent (MODULE) to make undo/redo entry valid
for( unsigned int i = 0; i < aItemsList.GetCount(); ++i )
assert( aItemsList.GetPickedItem( i )->GetParent() == owner );
#endif /* not NDEBUG */
SaveCopyInUndoList( owner, aTypeCommand, aTransformPoint );
}
int EDIT_TOOL::Remove( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
if( !hoverSelection( selection ) )
return 0;
// Get a copy of the selected items set
PICKED_ITEMS_LIST selectedItems = selection.items;
PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>();
// As we are about to remove items, they have to be removed from the selection first
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
// Save them
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
selectedItems.SetPickedItemStatus( UR_DELETED, i );
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selectedItems, UR_DELETED );
// And now remove
for( unsigned int i = 0; i < selectedItems.GetCount(); ++i )
remove( static_cast<BOARD_ITEM*>( selectedItems.GetPickedItem( i ) ) );
getModel<BOARD>()->GetRatsnest()->Recalculate();
return 0;
}
/**
* Function DeleteItemsInList
* delete schematic items in aItemsList
* deleted items are put in undo list
*/
void DeleteItemsInList( EDA_DRAW_PANEL* panel, PICKED_ITEMS_LIST& aItemsList )
{
SCH_SCREEN* screen = (SCH_SCREEN*) panel->GetScreen();
SCH_EDIT_FRAME* frame = (SCH_EDIT_FRAME*) panel->GetParent();
PICKED_ITEMS_LIST itemsList;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
ITEM_PICKER itemWrapper( item, UR_DELETED );
if( item->Type() == SCH_SHEET_PIN_T )
{
/* this item is depending on a sheet, and is not in global list */
wxMessageBox( wxT( "DeleteItemsInList() err: unexpected SCH_SHEET_PIN_T" ) );
}
else
{
screen->Remove( item );
/* Unlink the structure */
itemsList.PushItem( itemWrapper );
}
}
frame->SaveCopyInUndoList( itemsList, UR_DELETED );
}
void PCB_EDIT_FRAME::Block_Delete()
{
OnModify();
SetCurItem( NULL );
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_DELETED;
// unlink items and clear flags
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->GetConnectivity()->Remove( item );
switch( item->Type() )
{
case PCB_MODULE_T:
{
MODULE* module = (MODULE*) item;
module->ClearFlags();
module->UnLink();
m_Pcb->m_Status_Pcb = 0;
}
break;
case PCB_ZONE_AREA_T: // a zone area
m_Pcb->Remove( item );
break;
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
item->UnLink();
break;
// These items are deleted, but not put in undo list
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
item->UnLink();
itemsList->RemovePicker( ii );
ii--;
item->DeleteStructure();
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Delete( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_DELETED );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::Block_Flip()
{
#define INVERT( pos ) (pos) = center.y - ( (pos) - center.y )
wxPoint memo;
wxPoint center; // Position of the axis for inversion of all elements
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_FLIPPED;
memo = GetCrossHairPosition();
center = GetScreen()->m_BlockLocate.Centre();
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_FLIPPED, ii );
item->Flip( center );
switch( item->Type() )
{
case PCB_MODULE_T:
item->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
// Move and rotate the track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Flip( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_FLIPPED, center );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void MoveItemsInList( PICKED_ITEMS_LIST& aItemsList, const wxPoint& aMoveVector )
{
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
item->Move( aMoveVector );
}
}
void PCB_EDIT_FRAME::Block_Rotate()
{
wxPoint oldpos;
wxPoint centre; // rotation cent-re for the rotation transform
int rotAngle = 900; // rotation angle in 0.1 deg.
oldpos = GetScreen()->GetCrossHairPosition();
centre = GetScreen()->m_BlockLocate.Centre();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.m_ItemsSelection;
itemsList->m_Status = UR_ROTATED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_ROTATED, ii );
item->Rotate( centre, rotAngle );
switch( item->Type() )
{
case PCB_MODULE_T:
( (MODULE*) item )->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
/* Move and rotate the track segments */
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Rotate( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_ROTATED, centre );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void MirrorX( PICKED_ITEMS_LIST& aItemsList, const wxPoint& aMirrorPoint )
{
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
item->MirrorX( aMirrorPoint.y ); // Place it in its new position.
item->ClearFlags();
}
}
void RotateListOfItems( PICKED_ITEMS_LIST& aItemsList, const wxPoint& rotationPoint )
{
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
item->Rotate( rotationPoint ); // Place it in its new position.
item->ClearFlags();
}
}
void PCB_EDIT_FRAME::Block_Move()
{
OnModify();
wxPoint MoveVector = GetScreen()->m_BlockLocate.GetMoveVector();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_MOVED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_MOVED, ii );
item->Move( MoveVector );
GetBoard()->GetConnectivity()->Update( item );
item->ClearFlags( IS_MOVED );
switch( item->Type() )
{
case PCB_MODULE_T:
m_Pcb->m_Status_Pcb = 0;
item->ClearFlags();
break;
// Move track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like a track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Move( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_MOVED, MoveVector );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void SCH_EDIT_FRAME::copyBlockItems( PICKED_ITEMS_LIST& aItemsList )
{
m_blockItems.ClearListAndDeleteItems(); // delete previous saved list, if exists
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
// Clear m_Flag member of selected items:
aItemsList.GetPickedItem( ii )->ClearFlags();
/* Make a copy of the original picked item. */
SCH_ITEM* copy = DuplicateStruct( (SCH_ITEM*) aItemsList.GetPickedItem( ii ) );
copy->SetParent( NULL );
// In list the wrapper is owner of the schematic item, we can use the UR_DELETED
// status for the picker because pickers with this status are owner of the picked item
// (or TODO ?: create a new status like UR_DUPLICATE)
ITEM_PICKER item( copy, UR_DELETED );
m_blockItems.PushItem( item );
}
}
void SCH_EDIT_FRAME::CheckListConnections( PICKED_ITEMS_LIST& aItemsList, bool aAppend )
{
std::vector< wxPoint > pts;
std::vector< wxPoint > connections;
GetSchematicConnections( connections );
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
std::vector< wxPoint > new_pts;
if( !item->IsConnectable() )
continue;
item->GetConnectionPoints( new_pts );
pts.insert( pts.end(), new_pts.begin(), new_pts.end() );
// If the item is a line, we also add any connection points from the rest of the schematic
// that terminate on the line after it is moved.
if( item->Type() == SCH_LINE_T )
{
SCH_LINE* line = (SCH_LINE*) item;
for( auto i : connections )
if( IsPointOnSegment( line->GetStartPoint(), line->GetEndPoint(), i ) )
pts.push_back( i );
}
else
{
// Clean up any wires that short non-wire connections in the list
for( auto point = new_pts.begin(); point != new_pts.end(); point++ )
{
for( auto second_point = point + 1; second_point != new_pts.end(); second_point++ )
{
aAppend |= TrimWire( *point, *second_point, aAppend );
}
}
}
}
// We always have some overlapping connection points. Drop duplicates here
std::sort( pts.begin(), pts.end(),
[]( const wxPoint& a, const wxPoint& b ) -> bool
{ return a.x < b.x || (a.x == b.x && a.y < b.y); } );
pts.erase( unique( pts.begin(), pts.end() ), pts.end() );
for( auto point : pts )
{
if( GetScreen()->IsJunctionNeeded( point, true ) )
{
AddJunction( point, aAppend );
aAppend = true;
}
}
}
void PCB_EDIT_FRAME::Edit_Track_Width( wxDC* aDC, TRACK* aTrackSegment )
{
/* Modify a full track (a trace) width (using DRC control).
* a full track is the set of track segments between 2 nodes: pads or a node that has
* more than 2 segments connected
* aDC = the curred device context (can be NULL)
* aTrackSegment = a via or a track belonging to the trace to change
*/
TRACK* pt_track;
int nb_segm;
if( aTrackSegment == NULL )
return;
pt_track = GetBoard()->MarkTrace( GetBoard()->m_Track, aTrackSegment, &nb_segm,
NULL, NULL, true );
PICKED_ITEMS_LIST itemsListPicker;
bool change = false;
for( int ii = 0; ii < nb_segm; ii++, pt_track = pt_track->Next() )
{
pt_track->SetState( BUSY, false );
if( !SetTrackSegmentWidth( pt_track, &itemsListPicker, false ) )
change = true;
}
if( !change )
return;
// Some segment have changed: redraw them and save in undo list
if( aDC )
{
m_canvas->CrossHairOff( aDC ); // Erase cursor shape
for( unsigned ii = 0; ii < itemsListPicker.GetCount(); ii++ )
{
TRACK* segm = (TRACK*) itemsListPicker.GetPickedItemLink( ii );
segm->Draw( m_canvas, aDC, GR_XOR ); // Erase old track shape
segm = (TRACK*) itemsListPicker.GetPickedItem( ii );
segm->Draw( m_canvas, aDC, GR_OR ); // Display new track shape
// fixme: commit!
// segm->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
m_canvas->CrossHairOn( aDC ); // Display cursor shape
}
SaveCopyInUndoList( itemsListPicker, UR_CHANGED );
}
void DuplicateItemsInList( SCH_SCREEN* screen, PICKED_ITEMS_LIST& aItemsList,
const wxPoint& aMoveVector )
{
SCH_ITEM* newitem;
if( aItemsList.GetCount() == 0 )
return;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
newitem = DuplicateStruct( (SCH_ITEM*) aItemsList.GetPickedItem( ii ) );
aItemsList.SetPickedItem( newitem, ii );
aItemsList.SetPickedItemStatus( UR_NEW, ii );
{
switch( newitem->Type() )
{
case SCH_JUNCTION_T:
case SCH_LINE_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_PIN_T:
case SCH_MARKER_T:
case SCH_NO_CONNECT_T:
default:
break;
case SCH_SHEET_T:
{
SCH_SHEET* sheet = (SCH_SHEET*) newitem;
sheet->SetTimeStamp( GetNewTimeStamp() );
break;
}
case SCH_COMPONENT_T:
( (SCH_COMPONENT*) newitem )->SetTimeStamp( GetNewTimeStamp() );
( (SCH_COMPONENT*) newitem )->ClearAnnotation( NULL );
break;
}
SetSchItemParent( newitem, screen );
screen->Append( newitem );
}
}
MoveItemsInList( aItemsList, aMoveVector );
}
void SCH_EDIT_FRAME::DeleteItemsInList( PICKED_ITEMS_LIST& aItemsList, bool aAppend )
{
PICKED_ITEMS_LIST itemsList;
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
ITEM_PICKER itemWrapper( item, UR_DELETED );
if( item->GetFlags() & STRUCT_DELETED )
continue;
DeleteItem( item, aAppend );
aAppend = true;
}
GetScreen()->ClearDrawingState();
}
void PCB_EDIT_FRAME::Block_Duplicate( bool aIncrement )
{
wxPoint MoveVector = GetScreen()->m_BlockLocate.GetMoveVector();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
PICKED_ITEMS_LIST newList;
newList.m_Status = UR_NEW;
ITEM_PICKER picker( NULL, UR_NEW );
BOARD_ITEM* newitem;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
newitem = (BOARD_ITEM*)item->Clone();
if( aIncrement )
newitem->IncrementItemReference();
if( item->Type() == PCB_MODULE_T )
m_Pcb->m_Status_Pcb = 0;
m_Pcb->Add( newitem );
if( newitem )
{
newitem->Move( MoveVector );
picker.SetItem ( newitem );
newList.PushItem( picker );
}
}
if( newList.GetCount() )
SaveCopyInUndoList( newList, UR_NEW );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
/**
* Function Edit_Track_Width
* Modify a full track width (using DRC control).
* a full track is the set of track segments between 2 ends: pads or a point that has
* more than 2 segments ends connected
* @param aDC = the curred device context (can be NULL)
* @param aTrackSegment = a segment or via on the track to change
*/
void PCB_EDIT_FRAME::Edit_Track_Width( wxDC* aDC, TRACK* aTrackSegment )
{
TRACK* pt_track;
int nb_segm;
if( aTrackSegment == NULL )
return;
pt_track = GetBoard()->MarkTrace( aTrackSegment, &nb_segm, NULL, NULL, true );
PICKED_ITEMS_LIST itemsListPicker;
bool change = false;
for( int ii = 0; ii < nb_segm; ii++, pt_track = pt_track->Next() )
{
pt_track->SetState( BUSY, false );
if( SetTrackSegmentWidth( pt_track, &itemsListPicker, false ) )
change = true;
}
if( !change )
return;
// Some segment have changed: redraw them and save in undo list
if( aDC )
{
m_canvas->CrossHairOff( aDC ); // Erase cursor shape
for( unsigned ii = 0; ii < itemsListPicker.GetCount(); ii++ )
{
TRACK* segm = (TRACK*) itemsListPicker.GetPickedItemLink( ii );
segm->Draw( m_canvas, aDC, GR_XOR ); // Erase old track shape
segm = (TRACK*) itemsListPicker.GetPickedItem( ii );
segm->Draw( m_canvas, aDC, GR_OR ); // Display new track shape
}
m_canvas->CrossHairOn( aDC ); // Display cursor shape
}
SaveCopyInUndoList( itemsListPicker, UR_CHANGED );
}
static void drawPickedItems( EDA_DRAW_PANEL* aPanel, wxDC* aDC, wxPoint aOffset )
{
PICKED_ITEMS_LIST* itemsList = &aPanel->GetScreen()->m_BlockLocate.GetItems();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
g_Offset_Module = -aOffset;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
switch( item->Type() )
{
case PCB_MODULE_T:
frame->GetBoard()->m_Status_Pcb &= ~RATSNEST_ITEM_LOCAL_OK;
((MODULE*) item)->DrawOutlinesWhenMoving( aPanel, aDC, g_Offset_Module );
break;
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T: // Currently markers are not affected by block commands
case PCB_MARKER_T:
item->Draw( aPanel, aDC, GR_XOR, aOffset );
break;
case PCB_ZONE_AREA_T:
item->Draw( aPanel, aDC, GR_XOR, aOffset );
((ZONE_CONTAINER*) item)->DrawFilledArea( aPanel, aDC, GR_XOR, aOffset );
break;
default:
break;
}
}
g_Offset_Module = wxPoint( 0, 0 );
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// First, filter unnecessary stuff from the list (i.e. for multiple pads / labels modified),
// take the first occurence of the module.
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
ITEM_PICKER picker = aItemsList.GetItemWrapper(ii);
BOARD_ITEM* item = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
// For texts belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T || item->Type() == PCB_PAD_T )
{
item = item->GetParent();
wxASSERT( item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
bool found = false;
for( unsigned j = 0; j < commandToUndo->GetCount(); j++ )
{
if( commandToUndo->GetPickedItem( j ) == item && commandToUndo->GetPickedItemStatus( j ) == UR_CHANGED )
{
found = true;
break;
}
}
if( !found )
commandToUndo->PushItem( ITEM_PICKER(item, UR_CHANGED ) );
else
continue;
} else {
commandToUndo->PushItem( picker );
}
}
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
{
EDA_ITEM* cloned = item->Clone();
commandToUndo->SetPickedItemLink( cloned, ii );
}
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
wxMessageBox( msg );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
bool FOOTPRINT_EDIT_FRAME::HandleBlockEnd( wxDC* DC )
{
int itemsCount = 0;
bool nextcmd = false;
MODULE* currentModule = GetBoard()->m_Modules;
if( GetScreen()->m_BlockLocate.GetCount() )
{
// Set the SELECTED flag of all preselected items, and clear preselect list
ClearMarkItems( currentModule );
PICKED_ITEMS_LIST* list = &GetScreen()->m_BlockLocate.GetItems();
for( unsigned ii = 0, e = list->GetCount(); ii < e; ++ii )
{
BOARD_ITEM* item = (BOARD_ITEM*) list->GetPickedItem( ii );
item->SetFlags( SELECTED );
++itemsCount;
}
GetScreen()->m_BlockLocate.ClearItemsList();
}
switch( GetScreen()->m_BlockLocate.GetCommand() )
{
case BLOCK_IDLE:
DisplayError( this, wxT( "Error in HandleBlockPLace" ) );
break;
case BLOCK_DRAG: // Drag
case BLOCK_DRAG_ITEM: // Drag a given item (not used here)
case BLOCK_MOVE: // Move
case BLOCK_COPY: // Copy
case BLOCK_COPY_AND_INCREMENT: // Specific to duplicate with increment command
// Find selected items if we didn't already set them manually
if( itemsCount == 0 )
itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate );
if( itemsCount )
{
nextcmd = true;
if( m_canvas->IsMouseCaptured() )
{
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
}
GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE );
m_canvas->Refresh( true );
}
break;
case BLOCK_MOVE_EXACT:
itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate );
if( itemsCount )
{
wxPoint translation;
double rotation = 0;
DIALOG_MOVE_EXACT dialog( this, translation, rotation );
int ret = dialog.ShowModal();
if( ret == wxID_OK )
{
SaveCopyInUndoList( currentModule, UR_MODEDIT );
const wxPoint blockCentre = GetScreen()->m_BlockLocate.Centre();
MoveMarkedItemsExactly( currentModule, blockCentre, translation, rotation );
}
}
break;
case BLOCK_PRESELECT_MOVE: // Move with preselection list
nextcmd = true;
m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines );
GetScreen()->m_BlockLocate.SetState( STATE_BLOCK_MOVE );
break;
case BLOCK_DELETE: // Delete
itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate );
if( itemsCount )
SaveCopyInUndoList( currentModule, UR_MODEDIT );
DeleteMarkedItems( currentModule );
break;
case BLOCK_SAVE: // Save
case BLOCK_PASTE:
break;
case BLOCK_ROTATE:
itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate );
if( itemsCount )
SaveCopyInUndoList( currentModule, UR_MODEDIT );
RotateMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() );
break;
case BLOCK_MIRROR_X:
case BLOCK_MIRROR_Y:
case BLOCK_FLIP: // mirror
itemsCount = MarkItemsInBloc( currentModule, GetScreen()->m_BlockLocate );
if( itemsCount )
SaveCopyInUndoList( currentModule, UR_MODEDIT );
MirrorMarkedItems( currentModule, GetScreen()->m_BlockLocate.Centre() );
break;
case BLOCK_ZOOM: // Window Zoom
Window_Zoom( GetScreen()->m_BlockLocate );
break;
case BLOCK_ABORT:
break;
case BLOCK_SELECT_ITEMS_ONLY:
break;
}
if( !nextcmd )
{
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_SELECT_ITEMS_ONLY )
{
ClearMarkItems( currentModule );
}
GetScreen()->ClearBlockCommand();
SetCurItem( NULL );
m_canvas->EndMouseCapture( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString,
false );
m_canvas->Refresh( true );
}
return nextcmd;
}
/**
* Function UpdateCopyOfZonesList
* check a pick list to remove zones identical to their copies
* and set the type of operation in picker (UR_DELETED, UR_CHANGED)
* if an item is deleted, the initial values are retrievered,
* because they can have changed in edition
* @param aPickList = the main pick list
* @param aAuxiliaryList = the list of deleted or added (new created) items after calculations
* @param aPcb = the Board
*
* aAuxiliaryList is a list of pickers updated by zone algorithms:
* This list contains zones which were added or deleted during the zones combine process
* aPickList :is a list of zones that can be modified (changed or deleted, or not modified)
* Typically, this is the list of existing zones on the layer of the edited zone,
* before any change.
* >> if the picked zone is not changed, it is removed from list
* >> if the picked zone was deleted (i.e. not found in board list), the picker is modified:
* its status becomes UR_DELETED
* the aAuxiliaryList corresponding picker is removed (if not found : set an error)
* >> if the picked zone was flagged as UR_NEW, and was after deleted ,
* perhaps combined with an other zone (i.e. not found in board list):
* the picker is removed
* the zone itself if really deleted
* the aAuxiliaryList corresponding picker is removed (if not found : set an error)
* After aPickList is cleaned, the aAuxiliaryList is read
* All pickers flagged UR_NEW are moved to aPickList
* (the corresponding zones are zone that were created by the zone normalize and combine process,
* mainly when adding cutout areas, or creating self intersecting contours)
* All pickers flagged UR_DELETED are removed, and the coresponding zones actually deleted
* (the corresponding zones are new zone that were created by the zone normalize process,
* when creating self intersecting contours, and after combined with an existing zone.
* At the end of the update process the aAuxiliaryList must be void,
* because all pickers created by the combine process
* must have been removed (removed for new and deleted zones, or moved in aPickList.)
* If not an error is set.
*/
void UpdateCopyOfZonesList( PICKED_ITEMS_LIST& aPickList,
PICKED_ITEMS_LIST& aAuxiliaryList,
BOARD* aPcb )
{
for( unsigned kk = 0; kk < aPickList.GetCount(); kk++ )
{
UNDO_REDO_T status = aPickList.GetPickedItemStatus( kk );
ZONE_CONTAINER* ref = (ZONE_CONTAINER*) aPickList.GetPickedItem( kk );
for( unsigned ii = 0; ; ii++ ) // analyse the main picked list
{
ZONE_CONTAINER* zone = aPcb->GetArea( ii );
if( zone == NULL )
{
/* End of list: the stored item is not found:
* it must be in aDeletedList:
* search it and restore initial values
* or
* if flagged UR_NEW: remove it definitively
*/
if( status == UR_NEW )
{
delete ref;
ref = NULL;
aPickList.RemovePicker( kk );
kk--;
}
else
{
ZONE_CONTAINER* zcopy = (ZONE_CONTAINER*) aPickList.GetPickedItemLink( kk );
aPickList.SetPickedItemStatus( UR_DELETED, kk );
wxASSERT_MSG( zcopy != NULL,
wxT( "UpdateCopyOfZonesList() error: link = NULL" ) );
ref->Copy( zcopy );
// the copy was deleted; the link does not exists now.
aPickList.SetPickedItemLink( NULL, kk );
delete zcopy;
}
// Remove this item from aAuxiliaryList, mainly for tests purpose
bool notfound = true;
for( unsigned nn = 0; nn < aAuxiliaryList.GetCount(); nn++ )
{
if( ref != NULL && aAuxiliaryList.GetPickedItem( nn ) == ref )
{
aAuxiliaryList.RemovePicker( nn );
notfound = false;
break;
}
}
wxASSERT_MSG( notfound != true,
wxT( "UpdateCopyOfZonesList() error: item not found in "
"aAuxiliaryList" ) );
break;
}
if( zone == ref ) // picked zone found
{
if( aPickList.GetPickedItemStatus( kk ) != UR_NEW )
{
ZONE_CONTAINER* zcopy = (ZONE_CONTAINER*) aPickList.GetPickedItemLink( kk );
if( zone->IsSame( *zcopy ) ) // Remove picked, because no changes
{
delete zcopy; // Delete copy
aPickList.RemovePicker( kk );
kk--;
}
}
break;
}
}
}
// Add new zones in main pick list, and remove pickers from Auxiliary List
for( unsigned ii = 0; ii < aAuxiliaryList.GetCount(); )
{
if( aAuxiliaryList.GetPickedItemStatus( ii ) == UR_NEW )
{
ITEM_PICKER picker = aAuxiliaryList.GetItemWrapper( ii );
aPickList.PushItem( picker );
aAuxiliaryList.RemovePicker( ii );
}
else if( aAuxiliaryList.GetPickedItemStatus( ii ) == UR_DELETED )
{
delete aAuxiliaryList.GetPickedItemLink( ii );
aAuxiliaryList.RemovePicker( ii );
}
else
ii++;
}
// Should not occur:
wxASSERT_MSG( aAuxiliaryList.GetCount() == 0,
wxT( "UpdateCopyOfZonesList() error: aAuxiliaryList not empty." ) );
}
void SCH_EDIT_FRAME::SaveCopyInUndoList( PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
commandToUndo->m_Status = aTypeCommand;
// Copy picker list:
commandToUndo->CopyList( aItemsList );
// Verify list, and creates data if needed
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) commandToUndo->GetPickedItem( ii );
wxASSERT( item );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
switch( command )
{
case UR_CHANGED: /* Create a copy of item */
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
commandToUndo->SetPickedItemLink( DuplicateStruct( item, true ), ii );
wxASSERT( commandToUndo->GetPickedItemLink( ii ) );
break;
case UR_MOVED:
case UR_MIRRORED_Y:
case UR_MIRRORED_X:
case UR_ROTATED:
case UR_NEW:
case UR_DELETED:
case UR_EXCHANGE_T:
case UR_WIRE_IMAGE:
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unknown undo/redo command %d" ), command ) );
break;
}
}
if( commandToUndo->GetCount() || aTypeCommand == UR_WIRE_IMAGE )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after new save there is no redo to do */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void SCH_SCREEN::SelectBlockItems()
{
PICKED_ITEMS_LIST* pickedlist = &m_BlockLocate.GetItems();
if( pickedlist->GetCount() == 0 )
return;
ClearDrawingState();
for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
item->SetFlags( SELECTED );
}
if( !m_BlockLocate.IsDragging() )
return;
// Select all the items in the screen connected to the items in the block.
// be sure end lines that are on the block limits are seen inside this block
m_BlockLocate.Inflate( 1 );
unsigned last_select_id = pickedlist->GetCount();
for( unsigned ii = 0; ii < last_select_id; ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
item->SetFlags( IS_DRAGGED );
if( item->Type() == SCH_LINE_T )
{
item->IsSelectStateChanged( m_BlockLocate );
if( !item->IsSelected() )
{ // This is a special case:
// this selected wire has no ends in block.
// But it was selected (because it intersects the selecting area),
// so we must keep it selected and select items connected to it
// Note: an other option could be: remove it from drag list
item->SetFlags( SELECTED | SKIP_STRUCT );
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( size_t i = 0; i < connections.size(); i++ )
addConnectedItemsToBlock( connections[i] );
}
pickedlist->SetPickerFlags( item->GetFlags(), ii );
}
else if( item->IsConnectable() )
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( size_t jj = 0; jj < connections.size(); jj++ )
addConnectedItemsToBlock( connections[jj] );
}
}
m_BlockLocate.Inflate( -1 );
}
void PCB_EDIT_FRAME::RunActionPlugin( ACTION_PLUGIN* aActionPlugin )
{
PICKED_ITEMS_LIST itemsList;
BOARD* currentPcb = GetBoard();
bool fromEmpty = false;
itemsList.m_Status = UR_CHANGED;
OnModify();
// Append tracks:
for( BOARD_ITEM* item = currentPcb->m_Track; item != NULL; item = item->Next() )
{
ITEM_PICKER picker( item, UR_CHANGED );
itemsList.PushItem( picker );
}
// Append modules:
for( BOARD_ITEM* item = currentPcb->m_Modules; item != NULL; item = item->Next() )
{
ITEM_PICKER picker( item, UR_CHANGED );
itemsList.PushItem( picker );
}
// Append drawings
for( BOARD_ITEM* item = currentPcb->m_Drawings; item != NULL; item = item->Next() )
{
ITEM_PICKER picker( item, UR_CHANGED );
itemsList.PushItem( picker );
}
// Append zones outlines
for( int ii = 0; ii < currentPcb->GetAreaCount(); ii++ )
{
ITEM_PICKER picker( (EDA_ITEM*) currentPcb->GetArea(
ii ), UR_CHANGED );
itemsList.PushItem( picker );
}
// Append zones segm:
for( BOARD_ITEM* item = currentPcb->m_SegZoneDeprecated; item != NULL; item = item->Next() )
{
ITEM_PICKER picker( item, UR_CHANGED );
itemsList.PushItem( picker );
}
if( itemsList.GetCount() > 0 )
SaveCopyInUndoList( itemsList, UR_CHANGED, wxPoint( 0.0, 0.0 ) );
else
fromEmpty = true;
itemsList.ClearItemsList();
// Execute plugin itself...
ACTION_PLUGINS::SetActionRunning( true );
aActionPlugin->Run();
ACTION_PLUGINS::SetActionRunning( false );
currentPcb->m_Status_Pcb = 0;
// Get back the undo buffer to fix some modifications
PICKED_ITEMS_LIST* oldBuffer = NULL;
if( fromEmpty )
{
oldBuffer = new PICKED_ITEMS_LIST();
oldBuffer->m_Status = UR_NEW;
}
else
{
oldBuffer = GetScreen()->PopCommandFromUndoList();
wxASSERT( oldBuffer );
}
// Try do discover what was modified
PICKED_ITEMS_LIST deletedItemsList;
// Found deleted modules
for( unsigned int i = 0; i < oldBuffer->GetCount(); i++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) oldBuffer->GetPickedItem( i );
ITEM_PICKER picker( item, UR_DELETED );
wxASSERT( item );
switch( item->Type() )
{
case PCB_NETINFO_T:
case PCB_MARKER_T:
case PCB_MODULE_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_DIMENSION_T:
case PCB_TARGET_T:
case PCB_SEGZONE_T:
// If item has a list it's mean that the element is on the board
if( item->GetList() == NULL )
{
deletedItemsList.PushItem( picker );
}
break;
case PCB_ZONE_AREA_T:
{
bool zoneFound = false;
for( int ii = 0; ii < currentPcb->GetAreaCount(); ii++ )
zoneFound |= currentPcb->GetArea( ii ) == item;
if( !zoneFound )
{
deletedItemsList.PushItem( picker );
}
break;
}
default:
wxString msg;
msg.Printf( _( "(PCB_EDIT_FRAME::OnActionPlugin) needs work: "
"BOARD_ITEM type (%d) not handled" ),
item->Type() );
wxFAIL_MSG( msg );
break;
}
}
// Mark deleted elements in undolist
for( unsigned int i = 0; i < deletedItemsList.GetCount(); i++ )
{
oldBuffer->PushItem( deletedItemsList.GetItemWrapper( i ) );
}
// Find new modules
for( BOARD_ITEM* item = currentPcb->m_Modules; item != NULL; item = item->Next() )
{
if( !oldBuffer->ContainsItem( item ) )
{
ITEM_PICKER picker( item, UR_NEW );
oldBuffer->PushItem( picker );
}
}
for( BOARD_ITEM* item = currentPcb->m_Track; item != NULL; item = item->Next() )
{
if( !oldBuffer->ContainsItem( item ) )
{
ITEM_PICKER picker( item, UR_NEW );
oldBuffer->PushItem( picker );
}
}
for( BOARD_ITEM* item = currentPcb->m_Drawings; item != NULL; item = item->Next() )
{
if( !oldBuffer->ContainsItem( item ) )
{
ITEM_PICKER picker( item, UR_NEW );
oldBuffer->PushItem( picker );
}
}
for( BOARD_ITEM* item = currentPcb->m_SegZoneDeprecated; item != NULL; item = item->Next() )
{
if( !oldBuffer->ContainsItem( item ) )
{
ITEM_PICKER picker( item, UR_NEW );
oldBuffer->PushItem( picker );
}
}
for( int ii = 0; ii < currentPcb->GetAreaCount(); ii++ )
{
if( !oldBuffer->ContainsItem( (EDA_ITEM*) currentPcb->GetArea( ii ) ) )
{
ITEM_PICKER picker( (EDA_ITEM*) currentPcb->GetArea(
ii ), UR_NEW );
oldBuffer->PushItem( picker );
}
}
GetScreen()->PushCommandToUndoList( oldBuffer );
if( IsGalCanvasActive() )
{
UseGalCanvas( GetGalCanvas() );
}
else
{
UpdateUserInterface();
GetScreen()->SetModify();
Refresh();
}
}
void SCH_SCREEN::SelectBlockItems()
{
auto addConnections = [ this ]( SCH_ITEM* item ) -> void
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( auto conn : connections )
addConnectedItemsToBlock( item, conn );
};
PICKED_ITEMS_LIST* pickedlist = &m_BlockLocate.GetItems();
if( pickedlist->GetCount() == 0 )
return;
ClearDrawingState();
for( unsigned ii = 0; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) pickedlist->GetPickedItem( ii );
item->SetFlags( SELECTED );
}
if( !m_BlockLocate.IsDragging() )
return;
// Select all the items in the screen connected to the items in the block.
// be sure end lines that are on the block limits are seen inside this block
m_BlockLocate.Inflate( 1 );
unsigned last_select_id = pickedlist->GetCount();
for( unsigned ii = 0; ii < last_select_id; ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
item->SetFlags( IS_DRAGGED );
if( item->Type() == SCH_LINE_T )
{
item->IsSelectStateChanged( m_BlockLocate );
if( !item->IsSelected() )
{ // This is a special case:
// this selected wire has no ends in block.
// But it was selected (because it intersects the selecting area),
// so we must keep it selected and select items connected to it
// Note: an other option could be: remove it from drag list
item->SetFlags( SELECTED | SKIP_STRUCT );
addConnections( item );
}
pickedlist->SetPickerFlags( item->GetFlags(), ii );
}
else if( item->IsConnectable() )
{
addConnections( item );
}
}
// Select the items that are connected to a block object that was added
// to our selection list in the last step.
for( unsigned ii = last_select_id; ii < pickedlist->GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*)pickedlist->GetPickedItem( ii );
if( item->Type() == SCH_COMPONENT_T ||
item->Type() == SCH_BUS_BUS_ENTRY_T ||
item->Type() == SCH_BUS_WIRE_ENTRY_T ||
item->Type() == SCH_SHEET_T ||
( item->Type() == SCH_LINE_T && !( item->GetFlags() & ( ENDPOINT | STARTPOINT ) ) ) )
{
item->SetFlags( IS_DRAGGED );
addConnections( item );
}
}
m_BlockLocate.Inflate( -1 );
}
int PCBNEW_CONTROL::AppendBoard( const TOOL_EVENT& aEvent )
{
int open_ctl;
wxString fileName;
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
PCB_EDIT_FRAME* editFrame = dynamic_cast<PCB_EDIT_FRAME*>( m_frame );
BOARD* board = getModel<BOARD>();
KIGFX::VIEW* view = getView();
if( !editFrame )
return 0;
// Pick a file to append
if( !AskLoadBoardFileName( editFrame, &open_ctl, &fileName, true ) )
return 0;
IO_MGR::PCB_FILE_T pluginType = plugin_type( fileName, open_ctl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep track of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not appended, so mark the existing tracks to know what are the new tracks
for( TRACK* track = board->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are appended to the item list, so keep trace to the last existing item is enough
MODULE* module = board->m_Modules.GetLast();
BOARD_ITEM* drawing = board->m_Drawings.GetLast();
int zonescount = board->GetAreaCount();
// Keep also the count of copper layers, to adjust if necessary
int initialCopperLayerCount = board->GetCopperLayerCount();
LSET initialEnabledLayers = board->GetEnabledLayers();
// Load the data
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", editFrame->GetPageSizeIU().x );
sprintf( ybuf, "%d", editFrame->GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
editFrame->GetDesignSettings().m_NetClasses.Clear();
pi->Load( fileName, board, &props );
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _( "Error loading board.\n%s" ), GetChars( ioe.errorText ));
DisplayError( editFrame, msg );
return 0;
}
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
// Process the new items
for( TRACK* track = board->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
picker.SetItem( track );
undoListPicker.PushItem( picker );
view->Add( track );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, track );
}
module = module ? module->Next() : board->m_Modules;
for( ; module; module = module->Next() )
{
picker.SetItem( module );
undoListPicker.PushItem( picker );
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( module );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, module );
}
drawing = drawing ? drawing->Next() : board->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
view->Add( drawing );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, drawing );
}
for( ZONE_CONTAINER* zone = board->GetArea( zonescount ); zone;
zone = board->GetArea( zonescount ) )
{
picker.SetItem( zone );
undoListPicker.PushItem( picker );
zonescount++;
view->Add( zone );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, zone );
}
if( undoListPicker.GetCount() == 0 )
return 0;
editFrame->SaveCopyInUndoList( undoListPicker, UR_NEW );
// Synchronize layers
// we should not ask PLUGINs to do these items:
int copperLayerCount = board->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
board->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = board->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
board->SetEnabledLayers( enabledLayers );
board->SetVisibleLayers( enabledLayers );
editFrame->ReCreateLayerBox();
editFrame->ReFillLayerWidget();
static_cast<PCB_DRAW_PANEL_GAL*>( editFrame->GetGalCanvas() )->SyncLayersVisibility( board );
// Ratsnest
board->BuildListOfNets();
board->SynchronizeNetsAndNetClasses();
board->GetRatsnest()->Recalculate();
// Start dragging the appended board
VECTOR2D v( static_cast<BOARD_ITEM*>( undoListPicker.GetPickedItem( 0 ) )->GetPosition() );
getViewControls()->WarpCursor( v, true, true );
m_toolMgr->InvokeTool( "pcbnew.InteractiveEdit" );
return 0;
}
void PCB_BASE_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand, const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// First, filter unnecessary stuff from the list (i.e. for multiple pads / labels modified),
// take the first occurence of the module (we save copies of modules when one of its subitems
// is changed).
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
ITEM_PICKER curr_picker = aItemsList.GetItemWrapper(ii);
BOARD_ITEM* item = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
// For items belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T || item->Type() == PCB_MODULE_EDGE_T
|| item->Type() == PCB_PAD_T )
{
// Item to be stored in the undo buffer is the parent module
item = item->GetParent();
wxASSERT( item && item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
// Check if the parent module has already been saved in another entry
bool found = false;
for( unsigned j = 0; j < commandToUndo->GetCount(); j++ )
{
if( commandToUndo->GetPickedItem( j ) == item && commandToUndo->GetPickedItemStatus( j ) == UR_CHANGED )
{
found = true;
break;
}
}
if( !found )
{
// Create a clean copy of the parent module
MODULE* orig = static_cast<MODULE*>( item );
MODULE* clone = new MODULE( *orig );
clone->SetParent( GetBoard() );
// Clear current flags (which can be temporary set by a current edit command)
for( EDA_ITEM* loc_item = clone->GraphicalItemsList(); loc_item;
loc_item = loc_item->Next() )
loc_item->ClearFlags();
for( D_PAD* pad = clone->PadsList(); pad; pad = pad->Next() )
pad->ClearFlags();
clone->Reference().ClearFlags();
clone->Value().ClearFlags();
ITEM_PICKER picker( item, UR_CHANGED );
picker.SetLink( clone );
commandToUndo->PushItem( picker );
orig->SetLastEditTime();
}
else
{
continue;
}
}
else
{
// Normal case: all other BOARD_ITEMs, are simply copied to the new list
commandToUndo->PushItem( curr_picker );
}
}
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
case UR_DRILLORIGIN:
case UR_GRIDORIGIN:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
{
EDA_ITEM* cloned = item->Clone();
commandToUndo->SetPickedItemLink( cloned, ii );
}
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxLogDebug( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else
{
// Should not occur
wxASSERT( false );
delete commandToUndo;
}
}
void PCB_EDIT_FRAME::Block_Rotate()
{
wxPoint centre; // rotation cent-re for the rotation transform
int rotAngle = m_rotationAngle; // rotation angle in 0.1 deg.
centre = GetScreen()->m_BlockLocate.Centre();
OnModify();
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_CHANGED;
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
itemsList->SetPickedItemStatus( UR_CHANGED, ii );
switch( item->Type() )
{
case PCB_MODULE_T:
( (MODULE*) item )->ClearFlags();
m_Pcb->m_Status_Pcb = 0;
break;
// Move and rotate the track segments
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
m_Pcb->m_Status_Pcb = 0;
break;
case PCB_ZONE_AREA_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
break;
// This item is not put in undo list
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
itemsList->RemovePicker( ii );
ii--;
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Rotate( ) error: unexpected type" ) );
break;
}
}
// Save all the block items in there current state before applying the rotation.
SaveCopyInUndoList( *itemsList, UR_CHANGED, centre );
// Now perform the rotation.
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
wxASSERT( item );
item->Rotate( centre, rotAngle );
GetBoard()->GetConnectivity()->Update( item );
}
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// Copy picker list:
commandToUndo->CopyList( aItemsList );
// Verify list, and creates data if needed
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
// For texts belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T )
{
item = item->GetParent();
wxASSERT( item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
commandToUndo->SetPickedItem( item, ii );
commandToUndo->SetPickedItemStatus( UR_CHANGED, ii );
}
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
commandToUndo->SetPickedItemLink( item->Clone(), ii );
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
wxMessageBox( msg );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void PCB_BASE_FRAME::ResetModuleTextSizes( const wxString & aFilter, bool aRef,
bool aValue, bool aOthers )
{
MODULE* module;
BOARD_ITEM* boardItem;
ITEM_PICKER itemWrapper( NULL, UR_CHANGED );
PICKED_ITEMS_LIST undoItemList;
unsigned int ii;
// Prepare undo list
for( module = GetBoard()->m_Modules; module; module = module->Next() )
{
itemWrapper.SetItem( module );
if( ! aFilter.IsEmpty() )
{
if( ! WildCompareString( aFilter, FROM_UTF8( module->GetFPID().Format().c_str() ),
false ) )
continue;
}
if( aRef )
{
TEXTE_MODULE *item = &module->Reference();
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
if( aValue )
{
TEXTE_MODULE *item = &module->Value();
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize ||
item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
if( aOthers )
{
// Go through all other module text fields
for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
{
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE *item = static_cast<TEXTE_MODULE*>( boardItem );
if( item->GetSize() != GetDesignSettings().m_ModuleTextSize
|| item->GetThickness() != GetDesignSettings().m_ModuleTextWidth )
{
undoItemList.PushItem( itemWrapper );
}
}
}
}
}
// Exit if there's nothing to do
if( !undoItemList.GetCount() )
return;
SaveCopyInUndoList( undoItemList, UR_CHANGED );
// Apply changes to modules in the undo list
for( ii = 0; ii < undoItemList.GetCount(); ii++ )
{
module = (MODULE*) undoItemList.GetPickedItem( ii );
if( aRef )
{
module->Reference().SetThickness( GetDesignSettings().m_ModuleTextWidth );
module->Reference().SetSize( GetDesignSettings().m_ModuleTextSize );
}
if( aValue )
{
module->Value().SetThickness( GetDesignSettings().m_ModuleTextWidth );
module->Value().SetSize( GetDesignSettings().m_ModuleTextSize );
}
if( aOthers )
{
for( boardItem = module->GraphicalItems(); boardItem; boardItem = boardItem->Next() )
{
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE *item = static_cast<TEXTE_MODULE*>( boardItem );
item->SetThickness( GetDesignSettings().m_ModuleTextWidth );
item->SetSize( GetDesignSettings().m_ModuleTextSize );
}
}
}
}
OnModify();
}