void CFStencil::buildPeriodicVector(Vector<Box>& a_periodicVector,
const ProblemDomain& a_fineDomain,
const DisjointBoxLayout& a_fineBoxes)
{
Box periodicTestBox(a_fineDomain.domainBox());
if (a_fineDomain.isPeriodic())
{
for (int idir=0; idir<SpaceDim; idir++)
{
if (a_fineDomain.isPeriodic(idir))
{
periodicTestBox.grow(idir,-1);
}
}
}
a_periodicVector.clear();
a_periodicVector.reserve(a_fineBoxes.size());
LayoutIterator lit = a_fineBoxes.layoutIterator();
for (lit.reset(); lit.ok(); ++lit)
{
const Box& box = a_fineBoxes[lit()];
a_periodicVector.push_back(box);
// if periodic, also need to add periodic images
// only do this IF we're periodic and box
// adjacent to the domain box boundary somewhere
if (a_fineDomain.isPeriodic()
&& !periodicTestBox.contains(box))
{
ShiftIterator shiftIt = a_fineDomain.shiftIterator();
IntVect shiftMult(a_fineDomain.domainBox().size());
Box shiftedBox(box);
for (shiftIt.begin(); shiftIt.ok(); ++shiftIt)
{
IntVect shiftVect = shiftMult*shiftIt();
shiftedBox.shift(shiftVect);
a_periodicVector.push_back(shiftedBox);
shiftedBox.shift(-shiftVect);
} // end loop over periodic shift directions
} // end if periodic
}
a_periodicVector.sort();
}
void
CFStencil::define(
const ProblemDomain& a_fineDomain,
const Box& a_grid,
const DisjointBoxLayout& a_fineBoxes,
const DisjointBoxLayout& a_coarBoxes,
int a_refRatio,
int a_direction,
Side::LoHiSide a_hiorlo)
{
m_isDefined = true;
CH_assert(a_refRatio >= 1);
CH_assert(a_direction >= 0);
CH_assert(a_direction < SpaceDim);
CH_assert((a_hiorlo == Side::Lo) ||
(a_hiorlo == Side::Hi));
CH_assert(!a_fineDomain.isEmpty());
//set internal vars. most of these are kept around
//just to keep the class from having an identity crisis.
m_direction = a_direction;
m_hiorlo = a_hiorlo;
Box finebox = a_grid;
//compute intvectset of all points on fine grid that
//need to be interpolated
//shift direction
int hilo = sign(a_hiorlo);
//create fine stencil
Box edgebox;
CH_assert((hilo ==1) || (hilo == -1));
if (hilo == -1)
{
edgebox = adjCellLo(finebox,m_direction,1);
}
else
{
edgebox = adjCellHi(finebox,m_direction,1);
}
edgebox = a_fineDomain & edgebox;
if (!edgebox.isEmpty())
{
Box periodicTestBox(a_fineDomain.domainBox());
if (a_fineDomain.isPeriodic())
{
for (int idir=0; idir<SpaceDim; idir++)
{
if (a_fineDomain.isPeriodic(idir))
{
periodicTestBox.grow(idir,-1);
}
}
}
m_fineIVS.define(edgebox);
LayoutIterator lit = a_fineBoxes.layoutIterator();
for (lit.reset(); lit.ok(); ++lit)
{
m_fineIVS -= a_fineBoxes[lit()];
// if periodic, also need to subtract periodic images
// only do this IF we're periodic _and_ both boxes
// adjoin the domain box boundary somewhere
if (a_fineDomain.isPeriodic() && !periodicTestBox.contains(edgebox)
&& !periodicTestBox.contains(a_fineBoxes[lit()]))
{
ShiftIterator shiftIt = a_fineDomain.shiftIterator();
IntVect shiftMult(a_fineDomain.domainBox().size());
Box shiftedBox(a_fineBoxes[lit()]);
for (shiftIt.begin(); shiftIt.ok(); ++shiftIt)
{
IntVect shiftVect = shiftMult*shiftIt();
shiftedBox.shift(shiftVect);
m_fineIVS -= shiftedBox;
shiftedBox.shift(-shiftVect);
} // end loop over periodic shift directions
} // end if periodic
}
}
//ivs where all coarse slopes are defined
//== coarsened fine ivs
m_coarIVS.define(m_fineIVS);
m_coarIVS.coarsen(a_refRatio);
// this is a trick to get around the lack of a IntVectSet intersection
// operator which works with a ProblemDomain
ProblemDomain coardom= coarsen(a_fineDomain, a_refRatio);
Box domainIntersectBox = m_coarIVS.minBox();
domainIntersectBox = coardom & domainIntersectBox;
m_coarIVS &= domainIntersectBox;
m_packedBox = m_fineIVS.minBox();
if (m_fineIVS.numPts() == m_packedBox.numPts())
{
m_isPacked = true;
}
else
{
m_isPacked = false;
m_packedBox = Box();
}
}
void ReductionCopier::define(const BoxLayout& a_level,
const BoxLayout& a_dest,
const ProblemDomain& a_domain,
const IntVect& a_ghost,
const Vector<int>& a_transverseDir,
bool a_exchange)
{
#ifdef MULTIDIM_TIMER
CH_TIME("ReductionCopier::define")
#endif
m_isDefined = true;
m_transverseDir = a_transverseDir;
CH_assert(a_level.isClosed());
CH_assert(a_dest.isClosed());
// CH_assert(a_level.checkPeriodic(a_domain));
clear();
buffersAllocated = false;
//bool self = a_dest == a_level;
const BoxLayout& level= a_level;
const BoxLayout& dest = a_dest;
// note that while much of the implementation for the
// periodic case remains in this function (as copied, more
// or less, from the original Copier), at least at the moment
// periodic support is "turned off" for the ReductionCopier
// because it's not entirely clear it will do the right thing
// for this case. I've left the vast majority of the
// periodic implementation in place, however, in case we
// change our minds... (DFM 3/10/09)
// set up vector of dataIndexes to keep track of which
// "to" boxes are not completely contained within the primary
// domain. these boxes are then candidates for filling by
// periodic images of the "from" data.
Vector<DataIndex> periodicallyFilledToVect;
// in order to cull which "from" data may be needed to
// fill the "to" data, keep track of the radius around the
// primary domain in which all these cells lie.
// do this by incrementally growing the domain box and
// keeping track of what this radius is.
// just to make things simpler, start off with a radius of one
Box grownDomainCheckBox = a_domain.domainBox();
grownDomainCheckBox.grow(1);
int periodicCheckRadius = 1;
// since valid regions of the "from" DBL may also be outside
// the primary domain, need to keep track of whether any of these
// need to be checked separately.
Vector<DataIndex> periodicFromVect;
// use same domain trick here as well
Box grownFromDomainCheckBox = a_domain.domainBox();
int periodicFromCheckRadius = 1;
Box domainBox(a_domain.domainBox());
// grab index extents of domain in transverse direction
Vector<int> transverseLo(m_transverseDir.size());
Vector<int> transverseHi(m_transverseDir.size());
for (int n=0; n<m_transverseDir.size(); n++)
{
// grab index extents of domain in transverse direction
transverseLo[n] = domainBox.smallEnd(m_transverseDir[n]);
transverseHi[n] = domainBox.bigEnd(m_transverseDir[n]);
}
bool isPeriodic = false;
// I think the right thing here is that the ReductionCopier
// completely ignores periodicity
//if (!domainBox.isEmpty())
//isPeriodic = a_domain.isPeriodic();
// (dfm -- 9/13/05) as currently written, the Copier won't correctly
// handle periodic cases where the number of ghost cells is greater
// than the width of the domain. We _should_ do multiple wraparounds,
// but we don't. So, put in this assertion. We can revisit this if it
// becomes an issue
if (isPeriodic)
{
for (int dir=0; dir<SpaceDim; dir++)
{
if (a_domain.isPeriodic(dir))
{
CH_assert (a_ghost[dir] <= domainBox.size(dir));
}
}
}
unsigned int myprocID = procID();
// The following 4 for loops are the result of a performance optimization.
// When increasing the size of the problem, we found that the code was
// looping over every destination box for every source box which was N1*N2
// loop iterations (essentially an N-squared approach).
// The following code attempts to simply reduce N1 and N2 by first separating
// the boxes (or LayoutIndexes to boxes) that reside on the current processor.
// Then the loop to determine which boxes of the first list intersect with
// which boxes of the second list can be done in N1' * N2' iterations,
// where N1' is the reduced N1 and N2' is the reduced N2.
// We have to break up the assigning of MotionItems into two separate
// loops and be careful about the local copies. These 4 loops are
// significantly faster than the original for loop -- _especially_
// for large problems. (ndk)
#ifdef CH_MPI // don't need to do this in serial
// make a vector of boxes (or LayoutIndexes to boxes) from destination layout
// that are known to reside on this processor.
vector<DataIndex> vectorDestDI;
vector<DataIndex> vectorDestOnProcDI;
for (LayoutIterator to(a_dest.layoutIterator()); to.ok(); ++to)
{
vectorDestDI.push_back(DataIndex(to()));
if (myprocID == dest.procID(to()))
{
vectorDestOnProcDI.push_back(DataIndex(to()));
}
}
// make a vector of boxes (or LayoutIndexes to boxes) from "level"/src layout
// that are known to reside on this processor.
vector<DataIndex> vectorLevelDI;
vector<DataIndex> vectorLevelOnProcDI;
for (LayoutIterator from(a_level.layoutIterator()); from.ok(); ++from)
{
vectorLevelDI.push_back(DataIndex(from()));
if (myprocID == level.procID(from()))
{
vectorLevelOnProcDI.push_back(DataIndex(from()));
}
}
#else
// in serial, it's not very interesting as it's all of them.
vector<DataIndex> vectorDestOnProcDI;
vector<DataIndex> vectorLevelDI;
for (LayoutIterator to(a_dest.layoutIterator()); to.ok(); ++to)
{
vectorDestOnProcDI.push_back(DataIndex(to()));
}
for (LayoutIterator from(a_level.layoutIterator()); from.ok(); ++from)
{
vectorLevelDI.push_back(DataIndex(from()));
}
#endif
// loop over all dest/to DI's on my processor
for (vector<DataIndex>::iterator vdi=vectorDestOnProcDI.begin();
vdi != vectorDestOnProcDI.end(); ++vdi)
{
// at this point, i know myprocID == toProcID
const DataIndex todi(*vdi);
Box ghost(dest[todi]);
// don't do anything if ghost is entirely outside domain
// may need to revisit this in the periodic case
if (a_domain.intersects(ghost))
{
// this is somewhat different from the "normal" Copier. We only want
// to look at ghost cells if they're outside the domain.
// note that we don't want to do this for domain ghost cells in the
// transverse (spreading) directions.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (ghost.bigEnd(dir) == domainBox.bigEnd(dir))
{
ghost.growHi(dir, a_ghost[dir]);
}
if (ghost.smallEnd(dir) == domainBox.smallEnd(dir))
{
ghost.growLo(dir, a_ghost[dir]);
}
}
}
Box destBox(ghost);
// for this Copier, we want to grow the "dest" region to cover the
// entire domain in the transverse direction. In that way, we
// will be able to catch all of the source data regions which
// project onto the dest boxes
// do this for all transverse directions
for (int n=0; n<m_transverseDir.size(); n++)
{
ghost.setSmall(m_transverseDir[n], transverseLo[n]);
ghost.setBig(m_transverseDir[n], transverseHi[n]);
}
// then for each level/from DI, see if they intersect
for (vector<DataIndex>::iterator vli = vectorLevelDI.begin();
vli != vectorLevelDI.end(); ++vli)
{
const DataIndex fromdi(*vli);
const unsigned int fromProcID = level.procID(fromdi);
Box fromBox(level[fromdi]);
// also grow the fromBox if it's near the domain boundary and
// if there are ghost cells specified.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
// and if it's not a transverseDir
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (fromBox.bigEnd(dir) == domainBox.bigEnd(dir))
{
fromBox.growHi(dir, a_ghost[dir]);
}
if (fromBox.smallEnd(dir) == domainBox.smallEnd(dir))
{
fromBox.growLo(dir, a_ghost[dir]);
}
}
}
if (fromBox.bigEnd(0) < ghost.smallEnd(0))
{
//can skip rest cuz we haven't gotten to something interesting
continue;
}
if (ghost.intersectsNotEmpty(fromBox))
{
Box box(ghost); // ??
box&=fromBox; // ??
// to get correct toBox, stretch box in the transverse direction
// then intersect with the destBox to get the appropriate part
// of the destbox
Box toBox(box);
// do this for all transverse directions
for (int n=0; n<m_transverseDir.size(); n++)
{
toBox.setSmall(m_transverseDir[n], transverseLo[n]);
toBox.setBig(m_transverseDir[n], transverseHi[n]);
}
toBox &= destBox;
MotionItem* item = new (s_motionItemPool.getPtr())
MotionItem(fromdi, todi, box, toBox);
if (item == NULL)
{
MayDay::Error("Out of Memory in copier::define");
}
if (fromProcID == myprocID)
{
// local move
if (a_exchange && fromdi == todi)
s_motionItemPool.returnPtr(item);
else
m_localMotionPlan.push_back(item);
}
else
{
item->procID = fromProcID;
m_toMotionPlan.push_back(item);
}
}
if (fromBox.smallEnd(0) > ghost.bigEnd(0))
{
//can break out of loop, since we know that the smallEnd
// of all the remaining boxes are lexigraphically beyond this ghosted box.
break;
}
}
} // end if ghost intersects domain
}
// Don't need to worry about this in serial as we already
// took care of the local copy motion items just above. skip this.
#ifdef CH_MPI
// loop over all dest/to DI's
for (vector<DataIndex>::iterator vdi=vectorDestDI.begin();
vdi != vectorDestDI.end(); ++vdi)
{
const DataIndex todi(*vdi);
Box ghost(dest[todi]);
// don't do anything if ghost is outside domain
if (a_domain.intersects(ghost) )
{
// this is somewhat different from the "normal" Copier. We only want
// to look at ghost cells if they're outside the domain.
// note that we don't want to do this for domain ghost cells in the
// transverse (spreading) directions.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (ghost.bigEnd(dir) == domainBox.bigEnd(dir))
{
ghost.growHi(dir, a_ghost[dir]);
}
if (ghost.smallEnd(dir) == domainBox.smallEnd(dir))
{
ghost.growLo(dir, a_ghost[dir]);
}
}
}
Box destBox(ghost);
// for this Copier, we want to grow the "dest" region to cover the
// entire domain in the transverse direction. In that way, we
// will be able to catch all of the source data regions which
// project onto the dest boxes
// do this for all transverse directions
for (int n=0; n<m_transverseDir.size(); n++)
{
ghost.setSmall(m_transverseDir[n], transverseLo[n]);
ghost.setBig(m_transverseDir[n], transverseHi[n]);
}
const unsigned int toProcID = dest.procID(todi);
// then for each level/from DI on this processor, see if they intersect
for (vector<DataIndex>::iterator vli = vectorLevelOnProcDI.begin();
vli != vectorLevelOnProcDI.end(); ++vli)
{
// at this point, i know myprocID == fromProcID
const DataIndex fromdi(*vli);
Box fromBox(level[fromdi]);
// also grow the fromBox if it's near the domain boundary and
// if there are ghost cells specified.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
// and if it's not a transverseDir
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (fromBox.bigEnd(dir) == domainBox.bigEnd(dir))
{
fromBox.growHi(dir, a_ghost[dir]);
}
if (fromBox.smallEnd(dir) == domainBox.smallEnd(dir))
{
fromBox.growLo(dir, a_ghost[dir]);
}
}
}
if (fromBox.bigEnd(0) < ghost.smallEnd(0))
{
//can skip rest cuz we haven't gotten to something interesting
continue;
}
if (ghost.intersectsNotEmpty(fromBox))
{
Box box(ghost); // ??
box&=fromBox; // ??
// to get correct toBox, stretch box in the transverse direction
// then intersect with the destBox to get the appropriate part
// of the destbox
// do this for each transverse direction
Box toBox(box);
for (int n=0; n<m_transverseDir.size(); n++)
{
toBox.setSmall(m_transverseDir[n], transverseLo[n]);
toBox.setBig(m_transverseDir[n], transverseHi[n]);
}
toBox &= destBox;
if (toProcID == myprocID)
{
// local move
// don't push back here! or you will get two.
// we already did it above...
//m_localMotionPlan.push_back(item);
}
else
{
MotionItem* item = new (s_motionItemPool.getPtr())
MotionItem(fromdi, todi, box, toBox);
if (item == NULL)
{
MayDay::Error("Out of Memory in copier::define");
}
item->procID = toProcID;
m_fromMotionPlan.push_back(item);
}
}
if (fromBox.smallEnd(0) > ghost.bigEnd(0))
{
//can break out of loop, since we know that the smallEnd
// of all the remaining boxes are lexigraphically beyond this ghosted box.
break;
}
}
} // end if ghost intersects domain
}
#endif
// put periodic intersection checking in here for "to" boxes
if (isPeriodic)
{
for (LayoutIterator to(a_dest.layoutIterator()); to.ok(); ++to)
{
Box ghost(dest[to()]);
// don't do anything if ghost doesn't intersect domain
if (a_domain.intersects(ghost) )
{
// this is somewhat different from the "normal" Copier. We only want
// to look at ghost cells if they're outside the domain.
// note that we don't want to do this for domain ghost cells in the
// transverse (spreading) directions.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (ghost.bigEnd(dir) == domainBox.bigEnd(dir))
{
ghost.growHi(dir, a_ghost[dir]);
}
if (ghost.smallEnd(dir) == domainBox.smallEnd(dir))
{
ghost.growLo(dir, a_ghost[dir]);
}
}
}
Box destBox(ghost);
// for this Copier, we want to grow the "dest" region to cover the
// entire domain in the transverse direction. In that way, we
// will be able to catch all of the source data regions which
// project onto the dest boxes
// do this for each transverse directions
for (int n=0; n<m_transverseDir.size(); n++)
{
ghost.setSmall(m_transverseDir[n], transverseLo[n]);
ghost.setBig(m_transverseDir[n], transverseHi[n]);
}
//unsigned int toProcID = dest.procID(to()); // unused variable
// only do this if ghost box hangs over domain edge
if (!domainBox.contains(ghost))
{
// add the dataIndex for this box to the list
// of boxes which we need to come back to
periodicallyFilledToVect.push_back(DataIndex(to()));
// now check to see if we need to grow the
// periodic check radius
if (!grownDomainCheckBox.contains(ghost))
{
// grow the domainCheckBox until it contains ghost
while (!grownDomainCheckBox.contains(ghost))
{
grownDomainCheckBox.grow(1);
periodicCheckRadius++;
}
} // end if we need to grow radius around domain
} //end if ghost box is not contained in domain
} // end if original ghost box didn't intersect domain
}// end if periodic
}
// Here ends the so-called N-squared optimizations. the rest is unchanged. (ndk)
// now do periodic checking, if necessary
if (isPeriodic)
{
// the only "from" boxes we will need to check
// will be those within periodicCheckRadius of the
// domain boundary. so, create a box to screen out
// those which we will need to check.
Box shrunkDomainBox = a_domain.domainBox();
shrunkDomainBox.grow(-periodicCheckRadius);
ShiftIterator shiftIt = a_domain.shiftIterator();
IntVect shiftMult(domainBox.size());
// now loop over "from" boxes
for (LayoutIterator from(a_level.layoutIterator()); from.ok(); ++from)
{
// first check to see whether we need to look at this box
const Box& fromBox = level[from()];
if (!shrunkDomainBox.contains(fromBox))
{
unsigned int fromProcID = level.procID(from());
// check to see if fromBox is contained in domain,
// if not, add it to the list of fromBoxes we need to
// go back and check separately to see if it will
// fill one of the "to" boxes
if (!domainBox.contains(fromBox))
{
periodicFromVect.push_back(DataIndex(from()));
if (!grownFromDomainCheckBox.contains(fromBox))
{
while (!grownFromDomainCheckBox.contains(fromBox))
{
grownFromDomainCheckBox.grow(1);
periodicFromCheckRadius++;
}
} // end if we need to grow domain check box
} // end if fromBox is outside domain
// now loop over those "to" boxes which were not contained
// in the domain
for (int toRef=0; toRef<periodicallyFilledToVect.size(); toRef++)
{
DataIndex toIndex = periodicallyFilledToVect[toRef];
unsigned int toProcID = dest.procID(toIndex);
// don't worry about anything that doesn't involve this proc
if (toProcID != myprocID && fromProcID != myprocID)
{
// do nothing
}
else
{
Box ghost(dest[toIndex]);
// don't do anything if ghost doesn't intersect domain
if (a_domain.intersects(ghost))
{
// this is somewhat different from the "normal" Copier.
// We only want
// to look at ghost cells if they're outside the domain.
// note that we don't want to do this for domain ghost
// cells in the transverse (spreading) directions.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (ghost.bigEnd(dir) == domainBox.bigEnd(dir))
{
ghost.growHi(dir, a_ghost[dir]);
}
if (ghost.smallEnd(dir) == domainBox.smallEnd(dir))
{
ghost.growLo(dir, a_ghost[dir]);
}
}
}
Box destBox(ghost);
// for this Copier, we want to grow the "dest"
// region to cover the entire domain in the transverse
// direction. In that way, we will be able to catch all
// of the source data regions which project onto the
// dest boxes
// do this for each transverse direction
for (int n=0; n<m_transverseDir.size(); n++)
{
ghost.setSmall(m_transverseDir[n], transverseLo[n]);
ghost.setBig(m_transverseDir[n], transverseHi[n]);
}
// now need to loop over shift vectors and look at images
for (shiftIt.begin(); shiftIt.ok(); ++shiftIt)
{
IntVect shiftVect(shiftIt()*shiftMult);
ghost.shift(shiftVect);
if (ghost.intersectsNotEmpty(fromBox)) // rarely happens
{
Box intersectBox(ghost);
intersectBox &= fromBox;
Box toBox(intersectBox);
toBox.shift(-shiftVect);
toBox &= destBox;
MotionItem* item = new (s_motionItemPool.getPtr())
MotionItem(DataIndex(from()), DataIndex(toIndex),
intersectBox, toBox);
if (item == NULL)
{
MayDay::Error("Out of Memory in copier::define");
}
if (toProcID == fromProcID) // local move
m_localMotionPlan.push_back(item);
else if (fromProcID == myprocID)
{
item->procID = toProcID;
m_fromMotionPlan.push_back(item);
}
else
{
item->procID = fromProcID;
m_toMotionPlan.push_back(item);
}
} // end if shifted box intersects
ghost.shift(-shiftVect);
} // end loop over shift vectors
} // end if original "ghost" intersected domain
} // end if either from box or to box are on this proc
} // end loop over destination boxes
} // end if source box is close to domain boundary
} // end loop over destination boxes
// now go back through the "from" boxes which were outside
// the domain and see if they intersect any toBoxes
if (periodicFromVect.size() != 0)
{
// the only "to" boxes we will need to check
// will be those within periodicCheckRadius of the
// domain boundary. so, create a box to screen out
// those which we will need to check.
shrunkDomainBox = a_domain.domainBox();
shrunkDomainBox.grow(-periodicFromCheckRadius);
// now loop over the "to" boxes
for (LayoutIterator to(a_dest.layoutIterator()); to.ok(); ++to)
{
// first check to see whether we need to look at this box
Box ghost(dest[to()]);
// don't do anything if "ghost" doesn't interesect domain
if (a_domain.intersects(ghost))
{
// this is somewhat different from the "normal" Copier.
// We only want
// to look at ghost cells if they're outside the domain.
// note that we don't want to do this for domain ghost cells
// in the transverse (spreading) directions.
for (int dir=0; dir<SpaceDim; dir++)
{
bool isTransverseDir = false;
for (int n=0; n<m_transverseDir.size(); n++)
{
if (dir == m_transverseDir[n]) isTransverseDir = true;
}
// only need to do this if we specify a ghost radius
if (!isTransverseDir && a_ghost[dir] != 0)
{
if (ghost.bigEnd(dir) == domainBox.bigEnd(dir))
{
ghost.growHi(dir, a_ghost[dir]);
}
if (ghost.smallEnd(dir) == domainBox.smallEnd(dir))
{
ghost.growLo(dir, a_ghost[dir]);
}
}
}
Box destBox(ghost);
// for this Copier, we want to grow the "dest" region to
// cover the entire domain in the transverse direction.
// In that way, we will be able to catch all of the source
// data regions which project onto the dest boxes
// do this for each transverse direction
for (int n=0; n<m_transverseDir.size(); n++)
{
ghost.setSmall(m_transverseDir[n], transverseLo[n]);
ghost.setBig(m_transverseDir[n], transverseHi[n]);
}
if (!shrunkDomainBox.contains(ghost))
{
unsigned int toProcID = a_dest.procID(to());
// now loop over those "from" boxes which are not
// contained by the domain
for (int fromRef = 0; fromRef<periodicFromVect.size(); fromRef++)
{
DataIndex fromIndex = periodicFromVect[fromRef];
const Box& fromBox = level[fromIndex];
unsigned int fromProcID = level.procID(fromIndex);
// don't worry about anything which doesn't involve
// this proc
if (toProcID != myprocID && fromProcID != myprocID)
{
// do nothing
}
else
{
// now need to loop over shift vectors and look at images
for (shiftIt.begin(); shiftIt.ok(); ++shiftIt)
{
IntVect shiftVect(shiftIt()*shiftMult);
ghost.shift(shiftVect);
if (ghost.intersectsNotEmpty(fromBox))
{
Box intersectBox(ghost);
intersectBox &= fromBox;
Box toBox(intersectBox);
toBox.shift(-shiftVect);
toBox &= destBox;
MotionItem* item = new (s_motionItemPool.getPtr())
MotionItem(DataIndex(fromIndex), DataIndex(to()),
intersectBox, toBox);
if (item == NULL)
{
MayDay::Error("Out of Memory in copier::define");
}
if (toProcID == fromProcID) // local move
m_localMotionPlan.push_back(item);
else if (fromProcID == myprocID)
{
item->procID = toProcID;
m_fromMotionPlan.push_back(item);
}
else
{
item->procID = fromProcID;
m_toMotionPlan.push_back(item);
}
} // end if shifted box intersects
ghost.shift(-shiftVect);
} // end loop over shift vectors
} // end if either from box or to box are on this proc
} // end loop over "from" boxes
} // end if destination box is close to domain boundary
} // end if original "ghost" intersects domain
} // end loop over destination boxes
} // end if any of the "From" boxes were outside the domain
} // end if we need to do anything for periodicity
}