int KTextDocumentLayout::hitTestIterated(QTextFrame::iterator begin, QTextFrame::iterator end, const QPointF &point, Qt::HitTestAccuracy accuracy) const
{
int position = -1;
QTextFrame::iterator it = begin;
for (it = begin; it != end; ++it) {
QTextBlock block = it.currentBlock();
QTextTable *table = qobject_cast<QTextTable*>(it.currentFrame());
QTextFrame *subFrame = it.currentFrame();
if (table) {
QTextTableCell cell = m_state->hitTestTable(table, point);
if (cell.isValid()) {
position = hitTestIterated(cell.begin(), cell.end(), point,
accuracy);
if (position == -1)
position = cell.lastPosition();
return position;
}
continue;
} else if (subFrame) {
position = hitTestIterated(subFrame->begin(), subFrame->end(), point, accuracy);
if (position != -1)
return position;
continue;
} else {
if (!block.isValid())
continue;
}
// kDebug(32500) <<"hitTest[" << point.x() <<"," << point.y() <<"]";
QTextLayout *layout = block.layout();
if (point.y() > layout->boundingRect().bottom()) {
// just skip this block. position = block.position() + block.length() - 1;
continue;
}
for (int i = 0; i < layout->lineCount(); i++) {
QTextLine line = layout->lineAt(i);
// kDebug(32500) <<" + line[" << line.textStart() <<"]:" << line.y() <<"-" << line.height();
if (point.y() > line.y() + line.height()) {
position = line.textStart() + line.textLength();
continue;
}
if (accuracy == Qt::ExactHit && point.y() < line.y()) // between lines
return -1;
if (accuracy == Qt::ExactHit && // left or right of line
(point.x() < line.x() || point.x() > line.x() + line.width()))
return -1;
if (point.x() > line.width() && layout->textOption().textDirection() == Qt::RightToLeft) {
// totally right of RTL text means the position is the start of the text.
return block.position() + line.textStart();
}
return block.position() + line.xToCursor(point.x());
}
}
return -1;
}
void TestDocumentLayout::testRightToLeftList()
{
initForNewTest("a\nb\nc");
KoParagraphStyle h1;
h1.setTextProgressionDirection(KoText::RightLeftTopBottom);
m_styleManager->add(&h1);
KoListStyle listStyle;
KoListLevelProperties llp = listStyle.levelProperties(1);
llp.setStyle(KoListStyle::DecimalItem);
listStyle.setLevelProperties(llp);
h1.setListStyle(&listStyle);
QTextBlock block = m_doc->begin();
h1.applyStyle(block);
block = block.next();
h1.applyStyle(block);
block = block.next();
h1.applyStyle(block);
block = block.next();
m_layout->layout();
block = m_doc->begin();
while (block.isValid()) {
KoTextBlockData *data = dynamic_cast<KoTextBlockData *>(block.userData());
QVERIFY(data);
QVERIFY(data->counterWidth() > 2);
QVERIFY(data->counterPosition().x() > 100);
QTextLine line = block.layout()->lineAt(0);
QVERIFY(line.isValid());
QCOMPARE(line.x(), (qreal)0);
QCOMPARE(line.width() + data->counterWidth() + data->counterSpacing(), (qreal)200);
block = block.next();
}
}
QRect StyleHelper::drawText(QPainter* p, const QRect& rc, QString& str, int nLines,
int nFlags, const QColor& color, const QFont& font, bool bElided)
{
if (str.isEmpty()) {
qDebug() << "[WARNING]: the text should not be empty when drawing!";
return QRect();
}
QFontMetrics fm(font);
if (rc.height() < (fm.height() + fm.leading()) * nLines) {
qDebug() << "[WARNING]: space is not enough for drawing! text: " << str.left(30) << "...";
}
//if (rc.width() * nLines < fm.width(str)) {
// qDebug() << "[WARNING]: width should bigger than font metrics when drawing! text:" << str.left(30) << "...";
//}
p->save();
p->setPen(color);
p->setFont(font);
int nWidth = 0;
int nHeight = 0;
int nHeightLine = p->fontMetrics().height() + leading();
QRect rcRet(rc.x(), rc.y(), rc.width(), nHeightLine);
rcRet.adjust(margin(), 0, -margin(), 0);
QTextLayout textLayout(str, p->font());
QTextOption opt = textLayout.textOption();
opt.setWrapMode(QTextOption::WrapAnywhere);
textLayout.setTextOption(opt);
textLayout.beginLayout();
while (nLines) {
QTextLine line = textLayout.createLine();
if (!line.isValid()) {
break;
}
line.setLineWidth(rcRet.width());
QString lineText;
if (nLines == 1 && bElided) { // the last line
lineText = p->fontMetrics().elidedText(str, Qt::ElideRight, rcRet.width());
nWidth = qMax<int>(p->fontMetrics().width(lineText), nWidth);
} else {
lineText = str.left(line.textLength());
nWidth = qMax<int>(line.width(), nWidth);
}
str.remove(0, line.textLength());
p->drawText(rcRet, nFlags, lineText);
nHeight += nHeightLine;
rcRet.setRect(rc.x(), rc.y() + nHeight, nWidth, nHeightLine);
rcRet.adjust(margin(), 0, -margin(), 0);
nLines--;
}
textLayout.endLayout();
rcRet.setRect(rc.x() + margin(), rc.y(), nWidth + margin(), nHeight);
//rcRet.adjust(margin(), 0, -margin(), 0);
p->restore();
return rcRet;
}
void TestTableLayout::testBasicLayout()
{
QList<KoTableColumnStyle *> columnStyles;
QList<KoTableRowStyle *> rowStyles;
QMap<QPair<int, int>, KoTableCellStyle *> cellStyles;
QMap<QPair<int, int>, QString> cellTexts;
cellTexts.insert(qMakePair(0, 0), "Cell 1");
cellTexts.insert(qMakePair(0, 1), "Cell 2");
cellTexts.insert(qMakePair(1, 0), "Cell 3");
cellTexts.insert(qMakePair(1, 1), "Cell 4");
initTest(2, 2, 0, columnStyles, rowStyles, cellStyles, cellTexts);
m_layout->layout();
// Check that the table and layout data was correctly added to the table data map.
QVERIFY(m_textLayout->m_tableLayout.m_tableLayoutDataMap.contains(m_table));
TableLayoutData *tableLayoutData = m_textLayout->m_tableLayout.m_tableLayoutDataMap.value(m_table);
QVERIFY(tableLayoutData);
// Check table dimensions are correct.
QCOMPARE(tableLayoutData->m_rowPositions.size(), 2);
QCOMPARE(tableLayoutData->m_rowHeights.size(), 2);
QCOMPARE(tableLayoutData->m_tableRects.last().columnPositions.size(), 2);
QCOMPARE(tableLayoutData->m_tableRects.last().columnWidths.size(), 2);
// Check cell bounding rectangles.
/*
* Cell 0, 0 rules:
* x = 0 (no borders/margins/paddings)
* y = 0 (no borders/margins/paddings)
* width = 200/2 = 100 (table width/column count)
* height = 1 * 14.4 = 14.4 (number of lines * line height)
*/
QTextTableCell cell1 = m_table->cellAt(0, 0);
QCOMPARE(m_textLayout->m_tableLayout.cellBoundingRect(cell1), QRectF(0, 0, 100, 14.4));
/*
* Cell 0, 1 rules:
* x = 100 (table width/column count)
* y = 0 (no borders/margins/paddings)
* width = 200/2 = 100 (table width/column count)
* height = 1 * 14.4 = 14.4 (number of lines * line height)
*/
QTextTableCell cell2 = m_table->cellAt(0, 1);
QCOMPARE(m_textLayout->m_tableLayout.cellBoundingRect(cell2), QRectF(100, 0, 100, 14.4));
/*
* Cell 1, 0 rules:
* x = 0 (no borders/margins/paddings)
* y = 14.4 (line height)
* width = 200/2 = 100 (table width/column count)
* height = 1 * 14.4 = 14.4 (number of lines * line height)
*/
QTextTableCell cell3 = m_table->cellAt(1, 0);
QCOMPARE(m_textLayout->m_tableLayout.cellBoundingRect(cell3), QRectF(0, 14.4, 100, 14.4));
/*
* Cell 1, 1 rules:
* x = 100 (table width/column count)
* y = 14.4 (line height)
* width = 200/2 = 100 (table width/column count)
* height = 1 * 14.4 = 14.4 (number of lines * line height)
*/
QTextTableCell cell4 = m_table->cellAt(1, 1);
QCOMPARE(m_textLayout->m_tableLayout.cellBoundingRect(cell4), QRectF(100, 14.4, 100, 14.4));
// Check position of blocks in cells.
QTextBlock block1 = cell1.firstCursorPosition().block();
QCOMPARE(block1.position(), 1);
QVERIFY(block1.layout());
QCOMPARE(block1.layout()->lineCount(), 1);
QTextLine line = block1.layout()->lineAt(0);
QCOMPARE(line.width(), 100.);
QCOMPARE(line.position(), QPointF());
/*
* Blocks in cell 0,1 rules:
* Position Content Layout bounding rect
* 8 "Cell 2" 100, 0 100x?
*/
QTextBlock block2 = cell2.firstCursorPosition().block();
QCOMPARE(block2.position(), 8);
QVERIFY(block2.layout());
QCOMPARE(block2.layout()->lineCount(), 1);
line = block2.layout()->lineAt(0);
QCOMPARE(line.width(), 100.);
QCOMPARE(line.position(), QPointF(100, 0));
/*
* Blocks in cell 1,0 rules:
* Position Content Layout bounding rect
* 15 "Cell 3" 0, 14.4 100x?
*/
QTextBlock block3 = cell3.firstCursorPosition().block();
QCOMPARE(block3.position(), 15);
QVERIFY(block3.layout());
QCOMPARE(block3.layout()->lineCount(), 1);
line = block3.layout()->lineAt(0);
QCOMPARE(line.width(), 100.);
QCOMPARE(line.position().x(), 0.);
QVERIFY(qAbs(line.position().y() - 14.4) < 0.156);
/*
* Blocks in cell 1,1 rules:
* Position Content Layout bounding rect
* 22 "Cell 4" 100, 14.4 100x?
*/
QTextBlock block4 = cell4.firstCursorPosition().block();
QCOMPARE(block4.position(), 22);
QVERIFY(block4.layout());
QCOMPARE(block4.layout()->lineCount(), 1);
line = block4.layout()->lineAt(0);
QCOMPARE(line.width(), 100.);
QCOMPARE(line.position().x(), 100.);
QVERIFY(qAbs(line.position().y() - 14.4) < 0.156);
/*
* TODO: Insert/remove rows/columns.
*/
cleanupTest();
}