MainWindow()
{
QToolBar *toolBar = new QToolBar(this);
toolBar->setFixedHeight(80);
#if QT_VERSION < 0x040000
setDockEnabled(TornOff, true);
setRightJustification(true);
#else
toolBar->setAllowedAreas(Qt::TopToolBarArea | Qt::BottomToolBarArea);
#endif
QWidget *hBox = new QWidget(toolBar);
QLabel *label = new QLabel("Timer Interval", hBox);
QwtCounter *counter = new QwtCounter(hBox);
counter->setRange(-1.0, 100.0, 1.0);
QHBoxLayout *layout = new QHBoxLayout(hBox);
layout->addWidget(label);
layout->addWidget(counter);
layout->addWidget(new QWidget(hBox), 10); // spacer);
#if QT_VERSION >= 0x040000
toolBar->addWidget(hBox);
#endif
addToolBar(toolBar);
DataPlot *plot = new DataPlot(this);
setCentralWidget(plot);
connect(counter, SIGNAL(valueChanged(double)),
plot, SLOT(setTimerInterval(double)) );
counter->setValue(20.0);
}
FancyTabWidget::FancyTabWidget(QWidget *parent)
: QWidget(parent)
{
m_tabBar = new FancyTabBar(this);
m_tabBar->setShape(QTabBar::RoundedEast);
m_tabBar->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Minimum);
m_tabBar->setUsesScrollButtons(false);
m_selectionWidget = new QWidget(this);
QVBoxLayout *selectionLayout = new QVBoxLayout;
selectionLayout->setSpacing(0);
selectionLayout->setMargin(0);
QToolBar *bar = new QToolBar;
bar->addWidget(new FancyColorButton(this));
bar->setFixedHeight(StyleHelper::navigationWidgetHeight());
selectionLayout->addWidget(bar);
selectionLayout->addWidget(m_tabBar, 1);
m_selectionWidget->setLayout(selectionLayout);
m_selectionWidget->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::MinimumExpanding);
m_cornerWidgetContainer = new QWidget(this);
m_cornerWidgetContainer->setSizePolicy(QSizePolicy::Minimum, QSizePolicy::MinimumExpanding);
m_cornerWidgetContainer->setAutoFillBackground(false);
QVBoxLayout *cornerWidgetLayout = new QVBoxLayout;
cornerWidgetLayout->setSpacing(0);
cornerWidgetLayout->setMargin(0);
cornerWidgetLayout->addStretch();
m_cornerWidgetContainer->setLayout(cornerWidgetLayout);
selectionLayout->addWidget(m_cornerWidgetContainer, 0);
m_modesStack = new QStackedLayout;
m_statusBar = new QStatusBar;
m_statusBar->setSizePolicy(QSizePolicy::Ignored, QSizePolicy::Fixed);
QVBoxLayout *vlayout = new QVBoxLayout;
vlayout->setMargin(0);
vlayout->setSpacing(0);
vlayout->addLayout(m_modesStack);
vlayout->addWidget(m_statusBar);
QHBoxLayout *layout = new QHBoxLayout;
layout->setMargin(0);
layout->setSpacing(1);
layout->addWidget(m_selectionWidget);
layout->addLayout(vlayout);
setLayout(layout);
connect(m_tabBar, SIGNAL(currentChanged(int)), this, SLOT(showWidget(int)));
}
dtkPlotViewToolBar::dtkPlotViewToolBar(dtkPlotView *parent) : QFrame(parent->widget()), d(new dtkPlotViewToolBarPrivate())
{
QToolBar *bar = new QToolBar(this);
d->view = parent;
d->defaultViewAction = new QAction("Default", this);
d->defaultViewAction->setToolTip("Show default view");
d->defaultViewAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotAxis.png"));
d->gridAction = new QAction("Grid", this);
d->gridAction->setCheckable(true);
d->gridAction->setChecked(false);
d->gridAction->setToolTip("Draw grid coodinates");
d->gridAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotGrid.png"));
d->pickingAction = new QAction("Picking", this);
d->pickingAction->setCheckable(true);
d->pickingAction->setChecked(false);
d->pickingAction->setToolTip("Activate picking");
d->pickingAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotPicking.png"));
d->zoomAction = new QAction("Zoom", this);
d->zoomAction->setCheckable(true);
d->zoomAction->setChecked(false);
d->zoomAction->setToolTip("Activate zoom");
d->zoomAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotZoom.png"));
d->legendAction = new QAction("Legend", this);
d->legendAction->setCheckable(true);
d->legendAction->setChecked(false);
d->legendAction->setToolTip("Activate legend");
d->legendAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotLegend.png"));
d->exportAction = new QAction("Export", this);
d->exportAction->setToolTip("Export view");
d->exportAction->setIcon(QPixmap(":dtkPlot/pixmaps/dtkPlotSupportExport.png"));
bar->addAction(d->defaultViewAction);
bar->addAction(d->zoomAction);
bar->addAction(d->gridAction);
bar->addAction(d->pickingAction);
bar->addAction(d->legendAction);
bar->addWidget(new dtkSpacer);
bar->addAction(d->exportAction);
bar->setFloatable(false);
bar->setIconSize(QSize(18, 18));
bar->setMovable(false);
bar->setOrientation(Qt::Horizontal);
bar->setFixedHeight(25);
bar->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
QVBoxLayout *layout = new QVBoxLayout(this);
layout->setContentsMargins(0, 0, 0, 0);
layout->setSpacing(0);
layout->addWidget(bar);
connect(d->defaultViewAction, SIGNAL(triggered(bool)), this, SLOT(onDefaultView()));
connect(d->zoomAction, SIGNAL(triggered(bool)), this, SLOT(onZoomActivated(bool)));
connect(d->gridAction, SIGNAL(triggered(bool)), this, SLOT(onGridActivated(bool)));
connect(d->pickingAction, SIGNAL(triggered(bool)), this, SLOT(onPickingActivated(bool)));
connect(d->legendAction, SIGNAL(triggered(bool)), this, SLOT(onLegendActivated(bool)));
connect(d->exportAction, SIGNAL(triggered()), this, SLOT(onExport()));
}
MainWindow(ResourceFinder *rf)
{
//if (VERBOSE) fprintf(stderr, "Passing RF by address ...");
resFind = rf;
//if (VERBOSE) fprintf(stderr, "done \n");
Property options;
options.fromString(resFind->toString());
Value &robot = options.find("robot");
Value &part = options.find("part");
Value &rows = options.find("rows");
Value &cols = options.find("cols");
if (!options.check("robot"))
printf("Missing --robot option. Using icub.\n");
if (!options.check("part"))
printf("Missing --part option. Using head.\n");
if (!options.check("local"))
printf("Missing --name option. Using /portScope/vector:i.\n");
if (!options.check("remote"))
printf("Missing --remote option. Will wait for the connection...\n");
if (!options.check("rows"))
printf("Missing --rows option. Disabling subplotting.\n");
//if (VERBOSE) fprintf(stderr, "Start plotting the GUI\n");
QToolBar *toolBar = new QToolBar(this);
toolBar->setFixedHeight(80);
#if QT_VERSION < 0x040000
setDockEnabled(TornOff, true);
setRightJustification(true);
#else
toolBar->setAllowedAreas(Qt::TopToolBarArea | Qt::BottomToolBarArea);
#endif
QWidget *hBox = new QWidget(toolBar);
QLabel *label = new QLabel("Timer Interval", hBox);
QwtCounter *counter = new QwtCounter(hBox);
QLabel *labelActions = new QLabel("Actions", hBox);
QPushButton *toggleAcquireButton = new QPushButton("stop", hBox, "stop");
counter->setRange(-1.0, 1000.0, 1.0);
QHBoxLayout *layout = new QHBoxLayout(hBox);
layout->addWidget(label);
layout->addWidget(counter);
layout->addWidget(labelActions);
layout->addWidget(toggleAcquireButton);
layout->addWidget(new QWidget(hBox), 10); // spacer);
#if QT_VERSION >= 0x040000
toolBar->addWidget(hBox);
#endif
addToolBar(toolBar);
if (options.check("rows"))
nRows = rows.asInt();
else
nRows = 1;
if (options.check("cols"))
nCols = cols.asInt();
else
nCols = nRows;
nPlots = nRows*nCols;
nPortInputsInPlots = new int[nPlots];
QGrid *grid = new QGrid( nRows, Qt::Vertical, this );
plot = new DataPlot*[nPlots];
setCentralWidget(grid);
for( int r = 0 ; r < nRows ; r++ )
{
for( int c = 0 ; c < nCols ; c++ )
{
char rcS[256];
sprintf(rcS, "%d%d", r, c);
ConstString rS(rcS);
ConstString local;
local = resFind->find("local").toString();
//local port name
local = local + rcS;
//dataPlot creation
plot[r+nRows*c] = new DataPlot(grid);
//dataPlot set plot to read from
setInputPort(resFind, r+nRows*c, local);
//dataPlot set indeces of ports to plot
setIndexMask(resFind, r+nRows*c, nPortInputsInPlots[r+nRows*c]);
}
}
for( int r = 0 ; r < nRows ; r++ )
{
for( int c = 0 ; c < nCols ; c++ )
{
//stop acquisition button
connect( toggleAcquireButton, SIGNAL(clicked()), plot[r+nRows*c], SLOT(toggleAcquire()) );
plot[r+nRows*c]->initSignalDimensions();
//counter button
connect(counter, SIGNAL(valueChanged(double)),
plot[r+nRows*c], SLOT(setTimerInterval(double)) );
counter->setValue(50.0);
QSizePolicy sizePolicy2(QSizePolicy::Maximum, QSizePolicy::Maximum);
grid->setSizePolicy(sizePolicy2);
QSizePolicy sizePolicy(QSizePolicy::Maximum, QSizePolicy::Maximum);
sizePolicy.setHeightForWidth(plot[r+nRows*c]->sizePolicy().hasHeightForWidth());
plot[r+nRows*c]->setSizePolicy(sizePolicy);
//QSize gridSize= grid->sizeHint();
//gridSize.setWidth(500);
//gridSize.setHeight(500);
plot[r+nRows*c]->setMinimumWidth(10);
plot[r+nRows*c]->setMaximumWidth(800);
plot[r+nRows*c]->setMinimumHeight(10);
plot[r+nRows*c]->setMaximumHeight(800);
//if (VERBOSE) fprintf(stderr, "Grid max is: hInt=%d, vInt=%d\n", grid->maximumHeight(), grid->maximumWidth());
//if (VERBOSE) fprintf(stderr, "Plot max is: hInt=%d, vInt=%d\n", plot[r+nRows*c]->maximumHeight(), plot[r+nRows*c]->maximumWidth());
//QSize plotSize= plot[r+nRows*c]->sizeHint();
//if (VERBOSE) fprintf(stderr, "Plot Hint is: hInt=%d, vInt=%d\n", plotSize.height(), plotSize.width());
}
}
}
VectorizerPopup::VectorizerPopup(QWidget *parent, Qt::WFlags flags)
#endif
: Dialog(TApp::instance()->getMainWindow(), true, false, "Vectorizer"), m_sceneHandle(TApp::instance()->getCurrentScene())
{
struct Locals {
int m_bit;
Locals() : m_bit() {}
static void addParameterGroup(
std::vector<ParamGroup> ¶mGroups,
int group, int startRow, int separatorRow = -1)
{
assert(group <= paramGroups.size());
if (group == paramGroups.size())
paramGroups.push_back(ParamGroup(startRow, separatorRow));
}
void addParameter(
std::vector<ParamGroup> ¶mGroups,
const QString ¶mName)
{
paramGroups.back().m_params.push_back(Param(paramName, m_bit++));
}
} locals;
// Su MAC i dialog modali non hanno bottoni di chiusura nella titleBar
setModal(false);
setWindowTitle(tr("Convert-to-Vector Settings"));
setLabelWidth(125);
setTopMargin(0);
setTopSpacing(0);
// Build vertical layout
beginVLayout();
QSplitter *splitter = new QSplitter(Qt::Vertical, this);
splitter->setSizePolicy(QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding));
addWidget(splitter);
QToolBar *leftToolBar = new QToolBar,
*rightToolBar = new QToolBar;
{
QWidget *toolbarsContainer = new QWidget(this);
toolbarsContainer->setFixedHeight(22);
addWidget(toolbarsContainer);
QHBoxLayout *toolbarsLayout = new QHBoxLayout(toolbarsContainer);
toolbarsContainer->setLayout(toolbarsLayout);
toolbarsLayout->setMargin(0);
toolbarsLayout->setSpacing(0);
QToolBar *spacingToolBar = new QToolBar(toolbarsContainer); // The spacer object must be a toolbar.
spacingToolBar->setFixedHeight(22); // It's related to qss choices... I know it's stinky
toolbarsLayout->addWidget(leftToolBar, 0, Qt::AlignLeft);
toolbarsLayout->addWidget(spacingToolBar, 1);
toolbarsLayout->addWidget(rightToolBar, 0, Qt::AlignRight);
}
endVLayout();
// Build parameters area
QScrollArea *paramsArea = new QScrollArea(splitter);
paramsArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
paramsArea->setWidgetResizable(true);
splitter->addWidget(paramsArea);
splitter->setStretchFactor(0, 1);
m_paramsWidget = new QFrame(paramsArea);
paramsArea->setWidget(m_paramsWidget);
m_paramsLayout = new QGridLayout;
m_paramsWidget->setLayout(m_paramsLayout);
int group = 0, row = 0;
locals.addParameterGroup(::l_centerlineParamGroups, group, row);
locals.addParameterGroup(::l_outlineParamGroups, group++, row);
// Vectorization mode
m_typeMenu = new QComboBox(this);
m_typeMenu->setFixedSize(245, WidgetHeight);
QStringList formats;
formats << tr("Centerline") << tr("Outline");
m_typeMenu->addItems(formats);
m_typeMenu->setMinimumHeight(WidgetHeight);
bool isOutline = m_sceneHandle->getScene()->getProperties()->getVectorizerParameters()->m_isOutline;
m_typeMenu->setCurrentIndex(isOutline ? 1 : 0);
connect(m_typeMenu, SIGNAL(currentIndexChanged(int)), this, SLOT(onTypeChange(int)));
m_paramsLayout->addWidget(new QLabel(tr("Mode")), row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_typeMenu, row++, 1);
locals.addParameter(l_centerlineParamGroups, tr("Mode"));
locals.addParameter(l_outlineParamGroups, tr("Mode"));
//-------------------- Parameters area - Centerline ------------------------
locals.addParameterGroup(l_centerlineParamGroups, group++, row);
// Threshold
m_cThresholdLabel = new QLabel(tr("Threshold"));
m_cThreshold = new IntField(this);
m_paramsLayout->addWidget(m_cThresholdLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_cThreshold, row++, 1);
locals.addParameter(l_centerlineParamGroups, tr("Threshold"));
// Accuracy
m_cAccuracyLabel = new QLabel(tr("Accuracy"));
m_cAccuracy = new IntField(this);
m_paramsLayout->addWidget(m_cAccuracyLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_cAccuracy, row++, 1);
locals.addParameter(l_centerlineParamGroups, tr("Accuracy"));
// Despeckling
m_cDespecklingLabel = new QLabel(tr("Despeckling"));
m_cDespeckling = new IntField(this);
m_paramsLayout->addWidget(m_cDespecklingLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_cDespeckling, row++, 1);
locals.addParameter(l_centerlineParamGroups, tr("Despeckling"));
// Max Thickness
m_cMaxThicknessLabel = new QLabel(tr("Max Thickness"));
m_paramsLayout->addWidget(m_cMaxThicknessLabel, row, 0, Qt::AlignRight);
m_cMaxThickness = new IntField(this);
m_cMaxThickness->enableSlider(false);
m_paramsLayout->addWidget(m_cMaxThickness, row++, 1, Qt::AlignLeft);
locals.addParameter(l_centerlineParamGroups, tr("Max Thickness"));
// Thickness Calibration
m_cThicknessRatioLabel = new QLabel(tr("Thickness Calibration"));
m_paramsLayout->addWidget(m_cThicknessRatioLabel, row, 0, Qt::AlignRight);
/*m_cThicknessRatio = new IntField(this);
paramsLayout->addWidget(m_cThicknessRatio, row++, 1);*/
QHBoxLayout *cThicknessRatioLayout = new QHBoxLayout;
cThicknessRatioLayout->addSpacing(20);
m_cThicknessRatioFirstLabel = new QLabel(tr("Start:"));
cThicknessRatioLayout->addWidget(m_cThicknessRatioFirstLabel);
m_cThicknessRatioFirst = new MeasuredDoubleLineEdit(this);
m_cThicknessRatioFirst->setMeasure("percentage");
cThicknessRatioLayout->addWidget(m_cThicknessRatioFirst);
m_cThicknessRatioLastLabel = new QLabel(tr("End:"));
cThicknessRatioLayout->addWidget(m_cThicknessRatioLastLabel);
m_cThicknessRatioLast = new MeasuredDoubleLineEdit(this);
m_cThicknessRatioLast->setMeasure("percentage");
cThicknessRatioLayout->addWidget(m_cThicknessRatioLast);
cThicknessRatioLayout->addStretch(1);
m_paramsLayout->addLayout(cThicknessRatioLayout, row++, 1);
locals.addParameter(l_centerlineParamGroups, tr("Thickness Calibration"));
// Checkboxes
{
static const QString name = tr("Preserve Painted Areas");
locals.addParameter(l_centerlineParamGroups, name);
m_cPaintFill = new CheckBox(name, this);
m_cPaintFill->setFixedHeight(WidgetHeight);
m_paramsLayout->addWidget(m_cPaintFill, row++, 1);
}
{
static const QString name = tr("Add Border");
locals.addParameter(l_centerlineParamGroups, name);
m_cMakeFrame = new CheckBox(name, this);
m_cMakeFrame->setFixedHeight(WidgetHeight);
m_paramsLayout->addWidget(m_cMakeFrame, row++, 1);
}
locals.addParameterGroup(l_centerlineParamGroups, group++, row + 1, row);
m_cNaaSourceSeparator = new Separator(tr("Full color non-AA images"));
m_paramsLayout->addWidget(m_cNaaSourceSeparator, row++, 0, 1, 2);
{
static const QString name = tr("Enhanced ink recognition");
locals.addParameter(l_centerlineParamGroups, name);
m_cNaaSource = new CheckBox(name, this);
m_cNaaSource->setFixedHeight(WidgetHeight);
m_paramsLayout->addWidget(m_cNaaSource, row++, 1);
}
//-------------------- Parameters area - Outline ------------------------
group = 1;
locals.addParameterGroup(l_outlineParamGroups, group++, row);
//Accuracy
m_oAccuracyLabel = new QLabel(tr("Accuracy"));
m_oAccuracy = new IntField(this);
m_paramsLayout->addWidget(m_oAccuracyLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oAccuracy, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Accuracy"));
//Despeckling
m_oDespecklingLabel = new QLabel(tr("Despeckling"));
m_oDespeckling = new IntField(this);
m_paramsLayout->addWidget(m_oDespecklingLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oDespeckling, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Despeckling"));
//Paint Fill
{
static const QString name = tr("Preserve Painted Areas");
locals.addParameter(l_outlineParamGroups, name);
m_oPaintFill = new CheckBox(name, this);
m_oPaintFill->setFixedHeight(WidgetHeight);
m_paramsLayout->addWidget(m_oPaintFill, row++, 1);
}
locals.addParameterGroup(l_outlineParamGroups, group++, row + 1, row);
m_oCornersSeparator = new Separator(tr("Corners"));
m_paramsLayout->addWidget(m_oCornersSeparator, row++, 0, 1, 2);
//Adherence
m_oAdherenceLabel = new QLabel(tr("Adherence"));
m_oAdherence = new IntField(this);
m_paramsLayout->addWidget(m_oAdherenceLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oAdherence, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Adherence"));
//Angle
m_oAngleLabel = new QLabel(tr("Angle"));
m_oAngle = new IntField(this);
m_paramsLayout->addWidget(m_oAngleLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oAngle, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Angle"));
//Relative
m_oRelativeLabel = new QLabel(tr("Curve Radius"));
m_oRelative = new IntField(this);
m_paramsLayout->addWidget(m_oRelativeLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oRelative, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Curve Radius"));
locals.addParameterGroup(l_outlineParamGroups, group++, row + 1, row);
m_oFullColorSeparator = new Separator(tr("Raster Levels"));
m_paramsLayout->addWidget(m_oFullColorSeparator, row++, 0, 1, 2);
//Max Colors
m_oMaxColorsLabel = new QLabel(tr("Max Colors"));
m_oMaxColors = new IntField(this);
m_paramsLayout->addWidget(m_oMaxColorsLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oMaxColors, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Max Colors"));
//Transparent Color
m_oTransparentColorLabel = new QLabel(tr("Transparent Color"), this);
m_oTransparentColor = new ColorField(this, true, TPixel32::Transparent, 48);
m_paramsLayout->addWidget(m_oTransparentColorLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oTransparentColor, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Transparent Color"));
locals.addParameterGroup(l_outlineParamGroups, group++, row + 1, row);
m_oTlvSeparator = new Separator(tr("TLV Levels"));
m_paramsLayout->addWidget(m_oTlvSeparator, row++, 0, 1, 2);
//Tone Threshold
m_oToneThresholdLabel = new QLabel(tr("Tone Threshold"));
m_oToneThreshold = new IntField(this);
m_paramsLayout->addWidget(m_oToneThresholdLabel, row, 0, Qt::AlignRight);
m_paramsLayout->addWidget(m_oToneThreshold, row++, 1);
locals.addParameter(l_outlineParamGroups, tr("Tone Threshold"));
m_paramsLayout->setRowStretch(row, 1);
//-------------------- Swatch area ------------------------
m_swatchArea = new VectorizerSwatchArea(this);
splitter->addWidget(m_swatchArea);
m_swatchArea->setEnabled(false); //Initally not enabled
connect(this, SIGNAL(valuesChanged()), m_swatchArea, SLOT(invalidateContents()));
//---------------------- Toolbar --------------------------
QAction *swatchAct = new QAction(createQIconOnOffPNG("preview", true), tr("Toggle Swatch Preview"), this);
swatchAct->setCheckable(true);
leftToolBar->addAction(swatchAct);
QAction *centerlineAct = new QAction(createQIconOnOffPNG("opacitycheck", true), tr("Toggle Centerlines Check"), this);
centerlineAct->setCheckable(true);
leftToolBar->addAction(centerlineAct);
QToolButton *visibilityButton = new QToolButton(this);
visibilityButton->setIcon(createQIconPNG("options"));
visibilityButton->setPopupMode(QToolButton::InstantPopup);
QMenu *visibilityMenu = new QMenu(visibilityButton);
visibilityButton->setMenu(visibilityMenu);
rightToolBar->addWidget(visibilityButton);
rightToolBar->addSeparator();
QAction *saveAct = new QAction(createQIconOnOffPNG("save", false), tr("Save Settings"), this);
rightToolBar->addAction(saveAct);
QAction *loadAct = new QAction(createQIconOnOffPNG("load", false), tr("Load Settings"), this);
rightToolBar->addAction(loadAct);
rightToolBar->addSeparator();
QAction *resetAct = new QAction(createQIconOnOffPNG("resetsize", false), tr("Reset Settings"), this);
rightToolBar->addAction(resetAct);
connect(swatchAct, SIGNAL(triggered(bool)), m_swatchArea, SLOT(enablePreview(bool)));
connect(centerlineAct, SIGNAL(triggered(bool)), m_swatchArea, SLOT(enableDrawCenterlines(bool)));
connect(visibilityMenu, SIGNAL(aboutToShow()), this, SLOT(populateVisibilityMenu()));
connect(saveAct, SIGNAL(triggered()), this, SLOT(saveParameters()));
connect(loadAct, SIGNAL(triggered()), this, SLOT(loadParameters()));
connect(resetAct, SIGNAL(triggered()), this, SLOT(resetParameters()));
//------------------- Convert Button ----------------------
//Convert Button
m_okBtn = new QPushButton(QString(tr("Convert")), this);
connect(m_okBtn, SIGNAL(clicked()), this, SLOT(onOk()));
addButtonBarWidget(m_okBtn);
//All detailed signals convey to the unique valuesChanged() signal. That makes it easier
//to disconnect update notifications whenever we loadConfiguration(..).
connect(this, SIGNAL(valuesChanged()), this, SLOT(updateSceneSettings()));
//Connect value changes to update the global VectorizerPopUpSettingsContainer.
//connect(m_typeMenu,SIGNAL(currentIndexChanged(const QString &)),this,SLOT(updateSceneSettings()));
connect(m_cThreshold, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_cAccuracy, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_cDespeckling, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_cMaxThickness, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
//connect(m_cThicknessRatio,SIGNAL(valueChanged(bool)),this,SLOT(onValueEdited(bool)));
connect(m_cThicknessRatioFirst, SIGNAL(valueChanged()), this, SLOT(onValueEdited()));
connect(m_cThicknessRatioLast, SIGNAL(valueChanged()), this, SLOT(onValueEdited()));
connect(m_cMakeFrame, SIGNAL(stateChanged(int)), this, SLOT(onValueEdited()));
connect(m_cPaintFill, SIGNAL(stateChanged(int)), this, SLOT(onValueEdited()));
connect(m_cNaaSource, SIGNAL(stateChanged(int)), this, SLOT(onValueEdited()));
connect(m_oAccuracy, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oDespeckling, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oPaintFill, SIGNAL(stateChanged(int)), this, SLOT(onValueEdited()));
connect(m_oAdherence, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oAngle, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oRelative, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oDespeckling, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oMaxColors, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
connect(m_oTransparentColor, SIGNAL(colorChanged(const TPixel32 &, bool)),
this, SLOT(onValueEdited(const TPixel32 &, bool)));
connect(m_oToneThreshold, SIGNAL(valueChanged(bool)), this, SLOT(onValueEdited(bool)));
refreshPopup();
//Non e' corretto: manca la possibilita' di aggiornare la selezione del livello corrente
// connect(TApp::instance()->getCurrentLevel(), SIGNAL(xshLevelChanged()),
// this, SLOT(updateValues()));
}
void TimeLine::initUI()
{
Q_ASSERT(editor() != nullptr);
setWindowTitle(tr("Timeline"));
QWidget* timeLineContent = new QWidget(this);
mLayerList = new TimeLineCells(this, editor(), TIMELINE_CELL_TYPE::Layers);
mTracks = new TimeLineCells(this, editor(), TIMELINE_CELL_TYPE::Tracks);
mHScrollbar = new QScrollBar(Qt::Horizontal);
mVScrollbar = new QScrollBar(Qt::Vertical);
mVScrollbar->setMinimum(0);
mVScrollbar->setMaximum(1);
mVScrollbar->setPageStep(1);
QWidget* leftWidget = new QWidget();
leftWidget->setMinimumWidth(120);
QWidget* rightWidget = new QWidget();
QWidget* leftToolBar = new QWidget();
leftToolBar->setFixedHeight(30);
QWidget* rightToolBar = new QWidget();
rightToolBar->setFixedHeight(30);
// --- left widget ---
// --------- layer buttons ---------
QToolBar* layerButtons = new QToolBar(this);
QLabel* layerLabel = new QLabel(tr("Layers:"));
layerLabel->setIndent(5);
QToolButton* addLayerButton = new QToolButton(this);
addLayerButton->setIcon(QIcon(":icons/add.png"));
addLayerButton->setToolTip(tr("Add Layer"));
addLayerButton->setFixedSize(24, 24);
QToolButton* removeLayerButton = new QToolButton(this);
removeLayerButton->setIcon(QIcon(":icons/remove.png"));
removeLayerButton->setToolTip(tr("Remove Layer"));
removeLayerButton->setFixedSize(24, 24);
layerButtons->addWidget(layerLabel);
layerButtons->addWidget(addLayerButton);
layerButtons->addWidget(removeLayerButton);
layerButtons->setFixedHeight(30);
QHBoxLayout* leftToolBarLayout = new QHBoxLayout();
leftToolBarLayout->setMargin(0);
leftToolBarLayout->addWidget(layerButtons);
leftToolBar->setLayout(leftToolBarLayout);
QAction* newBitmapLayerAct = new QAction(QIcon(":icons/layer-bitmap.png"), tr("New Bitmap Layer"), this);
QAction* newVectorLayerAct = new QAction(QIcon(":icons/layer-vector.png"), tr("New Vector Layer"), this);
QAction* newSoundLayerAct = new QAction(QIcon(":icons/layer-sound.png"), tr("New Sound Layer"), this);
QAction* newCameraLayerAct = new QAction(QIcon(":icons/layer-camera.png"), tr("New Camera Layer"), this);
QMenu* layerMenu = new QMenu(tr("&Layer", "Timeline add-layer menu"), this);
layerMenu->addAction(newBitmapLayerAct);
layerMenu->addAction(newVectorLayerAct);
layerMenu->addAction(newSoundLayerAct);
layerMenu->addAction(newCameraLayerAct);
addLayerButton->setMenu(layerMenu);
addLayerButton->setPopupMode(QToolButton::InstantPopup);
QGridLayout* leftLayout = new QGridLayout();
leftLayout->addWidget(leftToolBar, 0, 0);
leftLayout->addWidget(mLayerList, 1, 0);
leftLayout->setMargin(0);
leftLayout->setSpacing(0);
leftWidget->setLayout(leftLayout);
// --- right widget ---
// --------- key buttons ---------
QToolBar* timelineButtons = new QToolBar(this);
QLabel* keyLabel = new QLabel(tr("Keys:"));
keyLabel->setIndent(5);
QToolButton* addKeyButton = new QToolButton(this);
addKeyButton->setIcon(QIcon(":icons/add.png"));
addKeyButton->setToolTip(tr("Add Frame"));
addKeyButton->setFixedSize(24, 24);
QToolButton* removeKeyButton = new QToolButton(this);
removeKeyButton->setIcon(QIcon(":icons/remove.png"));
removeKeyButton->setToolTip(tr("Remove Frame"));
removeKeyButton->setFixedSize(24, 24);
QToolButton* duplicateKeyButton = new QToolButton(this);
duplicateKeyButton->setIcon(QIcon(":icons/controls/duplicate.png"));
duplicateKeyButton->setToolTip(tr("Duplicate Frame"));
duplicateKeyButton->setFixedSize(24, 24);
QLabel* zoomLabel = new QLabel(tr("Zoom:"));
zoomLabel->setIndent(5);
QSlider* zoomSlider = new QSlider(this);
zoomSlider->setRange(4, 40);
zoomSlider->setFixedWidth(74);
zoomSlider->setValue(mTracks->getFrameSize());
zoomSlider->setToolTip(tr("Adjust frame width"));
zoomSlider->setOrientation(Qt::Horizontal);
QLabel* onionLabel = new QLabel(tr("Onion skin:"));
QToolButton* onionTypeButton = new QToolButton(this);
onionTypeButton->setIcon(QIcon(":icons/onion_type.png"));
onionTypeButton->setToolTip(tr("Toggle match keyframes"));
onionTypeButton->setFixedSize(24, 24);
timelineButtons->addWidget(keyLabel);
timelineButtons->addWidget(addKeyButton);
timelineButtons->addWidget(removeKeyButton);
timelineButtons->addWidget(duplicateKeyButton);
timelineButtons->addSeparator();
timelineButtons->addWidget(zoomLabel);
timelineButtons->addWidget(zoomSlider);
timelineButtons->addSeparator();
timelineButtons->addWidget(onionLabel);
timelineButtons->addWidget(onionTypeButton);
timelineButtons->addSeparator();
timelineButtons->setFixedHeight(30);
// --------- Time controls ---------
mTimeControls = new TimeControls(this);
mTimeControls->setEditor(editor());
mTimeControls->initUI();
mTimeControls->setSizePolicy(QSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding));
updateLength();
QHBoxLayout* rightToolBarLayout = new QHBoxLayout();
rightToolBarLayout->addWidget(timelineButtons);
rightToolBarLayout->setAlignment(Qt::AlignLeft);
rightToolBarLayout->addWidget(mTimeControls);
rightToolBarLayout->setMargin(0);
rightToolBarLayout->setSpacing(0);
rightToolBar->setLayout(rightToolBarLayout);
QGridLayout* rightLayout = new QGridLayout();
rightLayout->addWidget(rightToolBar, 0, 0);
rightLayout->addWidget(mTracks, 1, 0);
rightLayout->setMargin(0);
rightLayout->setSpacing(0);
rightWidget->setLayout(rightLayout);
// --- Splitter ---
QSplitter* splitter = new QSplitter(this);
splitter->addWidget(leftWidget);
splitter->addWidget(rightWidget);
splitter->setSizes(QList<int>() << 100 << 600);
QGridLayout* lay = new QGridLayout();
lay->addWidget(splitter, 0, 0);
lay->addWidget(mVScrollbar, 0, 1);
lay->addWidget(mHScrollbar, 1, 0);
lay->setMargin(0);
lay->setSpacing(0);
timeLineContent->setLayout(lay);
setWidget(timeLineContent);
setWindowFlags(Qt::WindowStaysOnTopHint);
connect(mHScrollbar, &QScrollBar::valueChanged, mTracks, &TimeLineCells::hScrollChange);
connect(mTracks, &TimeLineCells::offsetChanged, mHScrollbar, &QScrollBar::setValue);
connect(mVScrollbar, &QScrollBar::valueChanged, mTracks, &TimeLineCells::vScrollChange);
connect(mVScrollbar, &QScrollBar::valueChanged, mLayerList, &TimeLineCells::vScrollChange);
connect(splitter, &QSplitter::splitterMoved, this, &TimeLine::updateLength);
connect(addKeyButton, &QToolButton::clicked, this, &TimeLine::addKeyClick);
connect(removeKeyButton, &QToolButton::clicked, this, &TimeLine::removeKeyClick);
connect(duplicateKeyButton, &QToolButton::clicked, this, &TimeLine::duplicateKeyClick);
connect(zoomSlider, &QSlider::valueChanged, mTracks, &TimeLineCells::setFrameSize);
connect(onionTypeButton, &QToolButton::clicked, this, &TimeLine::toogleAbsoluteOnionClick);
connect(mTimeControls, &TimeControls::soundToggled, this, &TimeLine::soundClick);
connect(mTimeControls, &TimeControls::fpsChanged, this, &TimeLine::fpsChanged);
connect(mTimeControls, &TimeControls::fpsChanged, this, &TimeLine::updateLength);
connect(mTimeControls, &TimeControls::playButtonTriggered, this, &TimeLine::playButtonTriggered);
connect(newBitmapLayerAct, &QAction::triggered, this, &TimeLine::newBitmapLayer);
connect(newVectorLayerAct, &QAction::triggered, this, &TimeLine::newVectorLayer);
connect(newSoundLayerAct, &QAction::triggered, this, &TimeLine::newSoundLayer);
connect(newCameraLayerAct, &QAction::triggered, this, &TimeLine::newCameraLayer);
connect(removeLayerButton, &QPushButton::clicked, this, &TimeLine::deleteCurrentLayer);
connect(mLayerList, &TimeLineCells::mouseMovedY, mLayerList, &TimeLineCells::setMouseMoveY);
connect(mLayerList, &TimeLineCells::mouseMovedY, mTracks, &TimeLineCells::setMouseMoveY);
connect(mTracks, &TimeLineCells::lengthChanged, this, &TimeLine::updateLength);
connect(editor(), &Editor::currentFrameChanged, this, &TimeLine::updateFrame);
LayerManager* layer = editor()->layers();
connect(layer, &LayerManager::layerCountChanged, this, &TimeLine::updateLayerNumber);
scrubbing = false;
}
MDIClass::MDIClass( QWidget* parent )
: MDIChild( parent )
{
setObjectName( "MDIClass" );
setType( ctClass );
setWindowIcon( QIcon( ":/Icons/Icons/projectshowfile.png" ) );
//
QVBoxLayout* vboxLayout = new QVBoxLayout( this );
vboxLayout->setObjectName( "vboxLayout" );
vboxLayout->setSpacing( 0 );
vboxLayout->setMargin( 0 );
// Toolbar
QToolBar* tb = new QToolBar( tr( "Files" ), this );
tb->setFixedHeight( tb->height() );
tb->setIconSize( QSize(16, 16 ) );
// Action Group
aGroup = new QActionGroup( this );
aGroup->setObjectName( "aGroup" );
// Actions
actionForm = new QAction( QIcon( ":/Icons/Icons/form.png" ), tr( "Form" ), this );
actionForm->setCheckable( true );
aGroup->addAction( actionForm );
actionHeader = new QAction( QIcon( ":/Icons/Icons/h.png" ), tr( "Header" ), this );
actionHeader->setCheckable( true );
aGroup->addAction( actionHeader );
actionSource = new QAction( QIcon( ":/Icons/Icons/cpp.png" ), tr( "Source" ), this );
actionSource->setCheckable( true );
aGroup->addAction( actionSource );
tb->addActions( aGroup->actions() );
vboxLayout->addWidget( tb );
// Workspace
wSpace = new QWorkspace( this );
wSpace->setObjectName( "wSpace" );
vboxLayout->addWidget( wSpace );
// Form
// Header
teHeader = new TextEditor( this );
teHeader->setObjectName( "teHeader" );
teHeader->setFrameShape( QFrame::NoFrame );
teHeader->setFrameShadow( QFrame::Plain );
teHeader->setMidLineWidth( 1 );
teHeader->setDefaultComponents( true );
teHeader->setWindowIcon( actionHeader->icon() );
setSettings( teHeader );
connect( teHeader, SIGNAL( replaceDialogRequested() ), this, SIGNAL( replaceDialogRequested() ) );
connect( teHeader->completion(), SIGNAL( beforeCompletionShow() ), this, SLOT( beforeCompletionShow() ) );
connect( teHeader->document(), SIGNAL( modificationChanged( bool ) ), this, SIGNAL( modified( bool ) ) );
connect( teHeader, SIGNAL( fileOpen( bool ) ), this, SLOT( fileOpened( bool ) ) );
connect( teHeader, SIGNAL( completionRequested( Completion*, TextEditor* ) ), this, SLOT( completionRequested( Completion*, TextEditor* ) ) );
wSpace->addWindow( teHeader, Qt::WindowTitleHint );
// Source
teSource = new TextEditor( this );
teSource->setObjectName( "teSource" );
teSource->setFrameShape( QFrame::NoFrame );
teSource->setFrameShadow( QFrame::Plain );
teSource->setMidLineWidth( 1 );
teSource->setDefaultComponents( true );
teSource->setWindowIcon( actionSource->icon() );
setSettings( teSource );
connect( teSource, SIGNAL( replaceDialogRequested() ), this, SIGNAL( replaceDialogRequested() ) );
connect( teSource, SIGNAL( beforeCompletionShow() ), this, SLOT( beforeCompletionShow() ) );
connect( teSource->document(), SIGNAL( modificationChanged( bool ) ), this, SIGNAL( modified( bool ) ) );
connect( teSource, SIGNAL( fileOpen( bool ) ), this, SLOT( fileOpened( bool ) ) );
connect( teSource, SIGNAL( completionRequested( Completion*, TextEditor* ) ), this, SLOT( completionRequested( Completion*, TextEditor* ) ) );
wSpace->addWindow( teSource, Qt::WindowTitleHint );
// Connections
QMetaObject::connectSlotsByName( this );
}
FilterWindow::FilterWindow()
{
id = 0;
QToolBar *toolBar = new QToolBar(this);
QToolBar *lowerToolBar = new QToolBar(this);
//lowerToolBar->setFixedHeight(80);
toolBar->setFixedHeight(80);
#if QT_VERSION < 0x040000
setDockEnabled(TornOff, true);
setRightJustification(true);
#else
toolBar->setAllowedAreas(Qt::TopToolBarArea | Qt::BottomToolBarArea);
lowerToolBar->setAllowedAreas(Qt::BottomToolBarArea);
#endif
QWidget *hBox = new QWidget(toolBar);
QWidget *lowerBox = new QWidget(lowerToolBar);
QLabel *label = new QLabel("Frequency", hBox);
QLabel *clabel = new QLabel("Range Max", hBox);
QLabel *mlabel = new QLabel("Range Min", hBox);
QwtCounter *counter = new QwtCounter(hBox);
QwtCounter *rangeCounter = new QwtCounter(hBox);
QwtCounter *minCounter = new QwtCounter(hBox);
QPushButton *scaleButton = new QPushButton("&Autoscale", hBox);
QPushButton *mgxButton = new QPushButton("MG&x", lowerBox);
QPushButton *avgButton = new QPushButton("Local Avg", lowerBox);
QPushButton *eButton = new QPushButton("e", lowerBox);
QPushButton *fButton = new QPushButton("f[n]", lowerBox);
QPushButton *mavgButton = new QPushButton("Moving Avg", lowerBox);
QwtKnob *rcKnob = new QwtKnob(lowerBox);
rcKnob->setRange(0,5,.1,0);
rcKnob->setScaleMaxMajor(10);
rcKnob->setValue(5.0);
QLabel *rcLabel = new QLabel("RC", rcKnob);
rcLabel->setAlignment(Qt::AlignTop | Qt::AlignHCenter);
QwtKnob *dtKnob = new QwtKnob(lowerBox);
dtKnob->setRange(0,5,.1,0);
dtKnob->setScaleMaxMajor(10);
dtKnob->setValid(1.0);
QLabel *dtLabel = new QLabel("Dt", dtKnob);
dtLabel->setAlignment(Qt::AlignTop | Qt::AlignHCenter);
QwtKnob *duKnob = new QwtKnob(lowerBox);
duKnob->setRange(0,5000,10,1);
duKnob->setScaleMaxMajor(10);
duKnob->setValid(1.0);
QLabel *duLabel = new QLabel("Du", duKnob);
duLabel->setAlignment(Qt::AlignTop | Qt::AlignHCenter);
// Sets the range and increment of the widgets
counter->setRange(-1.0, 2000.0, 10.0);
rangeCounter->setRange(-1048576.0,INT_MAX,100.0);
minCounter->setRange(-1048576.0, INT_MAX, 100.0);
QHBoxLayout *layout = new QHBoxLayout(hBox);
layout->addWidget(label);
layout->addWidget(counter);
layout->addWidget(clabel);
layout->addWidget(rangeCounter);
layout->addWidget(mlabel);
layout->addWidget(minCounter);
layout->addWidget(scaleButton);
QHBoxLayout *lowerLayout = new QHBoxLayout(lowerBox);
lowerLayout->addWidget(mgxButton);
lowerLayout->addWidget(avgButton);
lowerLayout->addWidget(eButton);
lowerLayout->addWidget(fButton);
lowerLayout->addWidget(mavgButton);
lowerLayout->addWidget(rcKnob);
lowerLayout->addWidget(dtKnob);
lowerLayout->addWidget(duKnob);
// layout->addWidget(new QWidget(hBox), 10); // spacer);
#if QT_VERSION >= 0x040000
toolBar->addWidget(hBox);
lowerToolBar->addWidget(lowerBox);
#endif
addToolBar(toolBar);
// Instantiates the plot, this being the parent widget
plot = new FilteredDataPlot(this);
setCentralWidget(plot);
addToolBarBreak(Qt::TopToolBarArea);
addToolBar(lowerToolBar);
// Connect signals
connect(counter, SIGNAL(valueChanged(double)),
plot, SLOT(setTimerInterval(double)) );
connect(rangeCounter, SIGNAL(valueChanged(double)),
plot, SLOT(setRange(double)));
connect(minCounter, SIGNAL(valueChanged(double)),
plot, SLOT(setMinRange(double)));
connect(mgxButton, SIGNAL(clicked()), plot, SLOT(detachMgx()));
connect(avgButton, SIGNAL(clicked()), plot, SLOT(detachAvg()));
connect(eButton,SIGNAL(clicked()), plot, SLOT(detachE()));
connect(fButton, SIGNAL(clicked()), plot, SLOT(detachF()));
connect(mavgButton, SIGNAL(clicked()), plot, SLOT(detachMavg()));
connect(scaleButton, SIGNAL(clicked()), plot, SLOT(autoScale()));
connect(scaleButton, SIGNAL(clicked()), plot->getDataFilter(), SLOT(resetLocalMax()));
connect(rcKnob, SIGNAL(valueChanged(double)), plot->getDataFilter(), SLOT(setRc(double)) );
connect(dtKnob, SIGNAL(valueChanged(double)), plot->getDataFilter(), SLOT(setDt(double)) );
connect(duKnob, SIGNAL(valueChanged(double)), plot->getDataFilter(), SLOT(setU(double)));
counter->setValue(50.0);
rangeCounter->setValue(10000.0);
minCounter->setValue(2000);
}
