void TestQgsOgcUtils::testGeometryFromGML()
{
// Test GML2
QgsGeometry* geom = QgsOgcUtils::geometryFromGML( "<Point><coordinates>123,456</coordinates></Point>" );
QVERIFY( geom );
QVERIFY( geom->wkbType() == QGis::WKBPoint );
QVERIFY( geom->asPoint() == QgsPoint( 123, 456 ) );
QgsGeometry* geomBox = QgsOgcUtils::geometryFromGML( "<gml:Box srsName=\"foo\"><gml:coordinates>135.2239,34.4879 135.8578,34.8471</gml:coordinates></gml:Box>" );
QVERIFY( geomBox );
QVERIFY( geomBox->wkbType() == QGis::WKBPolygon );
// Test GML3
geom = QgsOgcUtils::geometryFromGML( "<Point><pos>123 456</pos></Point>" );
QVERIFY( geom );
QVERIFY( geom->wkbType() == QGis::WKBPoint );
QVERIFY( geom->asPoint() == QgsPoint( 123, 456 ) );
geomBox = QgsOgcUtils::geometryFromGML( "<gml:Envelope srsName=\"foo\"><gml:lowerCorner>135.2239 34.4879</gml:lowerCorner><gml:upperCorner>135.8578 34.8471</gml:upperCorner></gml:Envelope>" );
QVERIFY( geomBox );
QVERIFY( geomBox->wkbType() == QGis::WKBPolygon );
delete geom;
delete geomBox;
}
void QgsRelationReferenceWidget::highlightFeature( QgsFeature f, CanvasExtent canvasExtent )
{
if ( !mCanvas )
return;
if ( !f.isValid() )
{
f = referencedFeature();
if ( !f.isValid() )
return;
}
if ( !f.hasGeometry() )
{
return;
}
QgsGeometry geom = f.geometry();
// scale or pan
if ( canvasExtent == Scale )
{
QgsRectangle featBBox = geom.boundingBox();
featBBox = mCanvas->mapSettings().layerToMapCoordinates( mReferencedLayer, featBBox );
QgsRectangle extent = mCanvas->extent();
if ( !extent.contains( featBBox ) )
{
extent.combineExtentWith( featBBox );
extent.scale( 1.1 );
mCanvas->setExtent( extent );
mCanvas->refresh();
}
}
else if ( canvasExtent == Pan )
{
QgsGeometry centroid = geom.centroid();
QgsPointXY center = centroid.asPoint();
center = mCanvas->mapSettings().layerToMapCoordinates( mReferencedLayer, center );
mCanvas->zoomByFactor( 1.0, ¢er ); // refresh is done in this method
}
// highlight
deleteHighlight();
mHighlight = new QgsHighlight( mCanvas, f, mReferencedLayer );
QgsIdentifyMenu::styleHighlight( mHighlight );
mHighlight->show();
QTimer *timer = new QTimer( this );
timer->setSingleShot( true );
connect( timer, &QTimer::timeout, this, &QgsRelationReferenceWidget::deleteHighlight );
timer->start( 3000 );
}
QList<double> QgsGeometryAnalyzer::simpleMeasure( QgsGeometry& mpGeometry )
{
QList<double> list;
double perim;
if ( mpGeometry.wkbType() == QgsWkbTypes::Point )
{
QgsPoint pt = mpGeometry.asPoint();
list.append( pt.x() );
list.append( pt.y() );
}
else
{
QgsDistanceArea measure;
list.append( measure.measureArea( mpGeometry ) );
if ( mpGeometry.type() == QgsWkbTypes::PolygonGeometry )
{
perim = perimeterMeasure( mpGeometry, measure );
list.append( perim );
}
}
return list;
}
void QgsRubberBand::addGeometry( const QgsGeometry& geom, QgsVectorLayer* layer )
{
if ( geom.isEmpty() )
{
return;
}
//maprender object of canvas
const QgsMapSettings& ms = mMapCanvas->mapSettings();
int idx = mPoints.size();
switch ( geom.wkbType() )
{
case QgsWkbTypes::Point:
case QgsWkbTypes::Point25D:
{
QgsPoint pt;
if ( layer )
{
pt = ms.layerToMapCoordinates( layer, geom.asPoint() );
}
else
{
pt = geom.asPoint();
}
addPoint( pt, false, idx );
removeLastPoint( idx, false );
}
break;
case QgsWkbTypes::MultiPoint:
case QgsWkbTypes::MultiPoint25D:
{
QgsMultiPoint mpt = geom.asMultiPoint();
for ( int i = 0; i < mpt.size(); ++i, ++idx )
{
QgsPoint pt = mpt[i];
if ( layer )
{
addPoint( ms.layerToMapCoordinates( layer, pt ), false, idx );
removeLastPoint( idx, false );
}
else
{
addPoint( pt, false, idx );
removeLastPoint( idx, false );
}
}
}
break;
case QgsWkbTypes::LineString:
case QgsWkbTypes::LineString25D:
{
QgsPolyline line = geom.asPolyline();
for ( int i = 0; i < line.count(); i++ )
{
if ( layer )
{
addPoint( ms.layerToMapCoordinates( layer, line[i] ), false, idx );
}
else
{
addPoint( line[i], false, idx );
}
}
}
break;
case QgsWkbTypes::MultiLineString:
case QgsWkbTypes::MultiLineString25D:
{
QgsMultiPolyline mline = geom.asMultiPolyline();
for ( int i = 0; i < mline.size(); ++i, ++idx )
{
QgsPolyline line = mline[i];
if ( line.isEmpty() )
{
--idx;
}
for ( int j = 0; j < line.size(); ++j )
{
if ( layer )
{
addPoint( ms.layerToMapCoordinates( layer, line[j] ), false, idx );
}
else
{
addPoint( line[j], false, idx );
}
}
}
}
break;
case QgsWkbTypes::Polygon:
case QgsWkbTypes::Polygon25D:
{
QgsPolygon poly = geom.asPolygon();
QgsPolyline line = poly[0];
for ( int i = 0; i < line.count(); i++ )
{
if ( layer )
{
addPoint( ms.layerToMapCoordinates( layer, line[i] ), false, idx );
}
else
{
addPoint( line[i], false, idx );
}
}
}
break;
case QgsWkbTypes::MultiPolygon:
case QgsWkbTypes::MultiPolygon25D:
{
QgsMultiPolygon multipoly = geom.asMultiPolygon();
for ( int i = 0; i < multipoly.size(); ++i, ++idx )
{
QgsPolygon poly = multipoly[i];
QgsPolyline line = poly[0];
for ( int j = 0; j < line.count(); ++j )
{
if ( layer )
{
addPoint( ms.layerToMapCoordinates( layer, line[j] ), false, idx );
}
else
{
addPoint( line[j], false, idx );
}
}
}
}
break;
case QgsWkbTypes::Unknown:
default:
return;
}
setVisible( true );
updateRect();
update();
}
int QgsMapCanvasSnapper::snapToBackgroundLayers( const QgsPoint& point, QList<QgsSnappingResult>& results, const QList<QgsPoint>& excludePoints )
{
results.clear();
if ( !mSnapper )
return 5;
//topological editing on?
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//snapping on intersection on?
int intersectionSnapping = QgsProject::instance()->readNumEntry( "Digitizing", "/IntersectionSnapping", 0 );
if ( topologicalEditing == 0 )
{
if ( intersectionSnapping == 0 )
mSnapper->setSnapMode( QgsSnapper::SnapWithOneResult );
else
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsWithinTolerances );
}
else if ( intersectionSnapping == 0 )
{
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsForSamePosition );
}
else
{
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsWithinTolerances );
}
//read snapping settings from project
bool snappingDefinedInProject, ok;
QStringList layerIdList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingList", QStringList(), &snappingDefinedInProject );
QStringList enabledList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingEnabledList", QStringList(), &ok );
QStringList toleranceList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingToleranceList", QStringList(), &ok );
QStringList toleranceUnitList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingToleranceUnitList", QStringList(), &ok );
QStringList snapToList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnapToList", QStringList(), &ok );
if ( !( layerIdList.size() == enabledList.size() &&
layerIdList.size() == toleranceList.size() &&
layerIdList.size() == toleranceUnitList.size() &&
layerIdList.size() == snapToList.size() ) )
{
// lists must have the same size, otherwise something is wrong
return 1;
}
QList<QgsSnapper::SnapLayer> snapLayers;
QgsSnapper::SnapLayer snapLayer;
// Use snapping information from the project
if ( snappingDefinedInProject )
{
// set layers, tolerances, snap to segment/vertex to QgsSnapper
QStringList::const_iterator layerIt( layerIdList.constBegin() );
QStringList::const_iterator tolIt( toleranceList.constBegin() );
QStringList::const_iterator tolUnitIt( toleranceUnitList.constBegin() );
QStringList::const_iterator snapIt( snapToList.constBegin() );
QStringList::const_iterator enabledIt( enabledList.constBegin() );
for ( ; layerIt != layerIdList.constEnd(); ++layerIt, ++tolIt, ++tolUnitIt, ++snapIt, ++enabledIt )
{
if ( *enabledIt != "enabled" )
{
// skip layer if snapping is not enabled
continue;
}
//layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( QgsMapLayerRegistry::instance()->mapLayer( *layerIt ) );
if ( !vlayer || !vlayer->hasGeometryType() )
continue;
snapLayer.mLayer = vlayer;
//tolerance
snapLayer.mTolerance = tolIt->toDouble();
snapLayer.mUnitType = ( QgsTolerance::UnitType ) tolUnitIt->toInt();
// segment or vertex
if ( *snapIt == "to_vertex" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertex;
}
else if ( *snapIt == "to_segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToSegment;
}
else
{
// to vertex and segment
snapLayer.mSnapTo = QgsSnapper::SnapToVertexAndSegment;
}
snapLayers.append( snapLayer );
}
}
else
{
// nothing in project. Use default snapping tolerance to vertex of current layer
QgsMapLayer* currentLayer = mMapCanvas->currentLayer();
if ( !currentLayer )
return 2;
QgsVectorLayer* currentVectorLayer = qobject_cast<QgsVectorLayer *>( currentLayer );
if ( !currentVectorLayer )
return 3;
snapLayer.mLayer = currentVectorLayer;
//default snap mode
QSettings settings;
QString defaultSnapString = settings.value( "/qgis/digitizing/default_snap_mode", "off" ).toString();
if ( defaultSnapString == "to segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToSegment;
}
else if ( defaultSnapString == "to vertex and segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertexAndSegment;
}
else if ( defaultSnapString == "to vertex" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertex;
}
else
{
return 0;
}
//default snapping tolerance (returned in map units)
snapLayer.mTolerance = QgsTolerance::defaultTolerance( currentVectorLayer, mMapCanvas->mapSettings() );
snapLayer.mUnitType = QgsTolerance::LayerUnits;
snapLayers.append( snapLayer );
}
mSnapper->setSnapLayers( snapLayers );
if ( mSnapper->snapMapPoint( point, results, excludePoints ) != 0 )
return 4;
if ( intersectionSnapping != 1 )
return 0;
QList<QgsSnappingResult> segments;
QList<QgsSnappingResult> points;
for ( QList<QgsSnappingResult>::const_iterator it = results.constBegin();
it != results.constEnd();
++it )
{
if ( it->snappedVertexNr == -1 )
{
QgsDebugMsg( "segment" );
segments.push_back( *it );
}
else
{
QgsDebugMsg( "no segment" );
points.push_back( *it );
}
}
if ( segments.length() < 2 )
return 0;
QList<QgsSnappingResult> myResults;
for ( QList<QgsSnappingResult>::const_iterator oSegIt = segments.constBegin();
oSegIt != segments.constEnd();
++oSegIt )
{
QgsDebugMsg( QString::number( oSegIt->beforeVertexNr ) );
QVector<QgsPoint> vertexPoints;
vertexPoints.append( oSegIt->beforeVertex );
vertexPoints.append( oSegIt->afterVertex );
QgsGeometry* lineA = QgsGeometry::fromPolyline( vertexPoints );
for ( QList<QgsSnappingResult>::iterator iSegIt = segments.begin();
iSegIt != segments.end();
++iSegIt )
{
QVector<QgsPoint> vertexPoints;
vertexPoints.append( iSegIt->beforeVertex );
vertexPoints.append( iSegIt->afterVertex );
QgsGeometry* lineB = QgsGeometry::fromPolyline( vertexPoints );
QgsGeometry* intersectionPoint = lineA->intersection( lineB );
delete lineB;
if ( intersectionPoint && intersectionPoint->type() == QGis::Point )
{
//We have to check the intersection point is inside the tolerance distance for both layers
double toleranceA = 0;
double toleranceB = 0;
for ( int i = 0 ;i < snapLayers.size();++i )
{
if ( snapLayers[i].mLayer == oSegIt->layer )
{
toleranceA = QgsTolerance::toleranceInMapUnits( snapLayers[i].mTolerance, snapLayers[i].mLayer, mMapCanvas->mapSettings(), snapLayers[i].mUnitType );
}
if ( snapLayers[i].mLayer == iSegIt->layer )
{
toleranceB = QgsTolerance::toleranceInMapUnits( snapLayers[i].mTolerance, snapLayers[i].mLayer, mMapCanvas->mapSettings(), snapLayers[i].mUnitType );
}
}
QgsGeometry* cursorPoint = QgsGeometry::fromPoint( point );
double distance = intersectionPoint->distance( *cursorPoint );
if ( distance < toleranceA && distance < toleranceB )
{
iSegIt->snappedVertex = intersectionPoint->asPoint();
myResults.append( *iSegIt );
}
delete cursorPoint;
}
delete intersectionPoint;
}
delete lineA;
}
if ( myResults.length() > 0 )
{
results.clear();
results = myResults;
}
return 0;
}
QVariantMap QgsLineIntersectionAlgorithm::processAlgorithm( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback )
{
std::unique_ptr< QgsFeatureSource > sourceA( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !sourceA )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INPUT" ) ) );
std::unique_ptr< QgsFeatureSource > sourceB( parameterAsSource( parameters, QStringLiteral( "INTERSECT" ), context ) );
if ( !sourceB )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INTERSECT" ) ) );
const QStringList fieldsA = parameterAsFields( parameters, QStringLiteral( "INPUT_FIELDS" ), context );
const QStringList fieldsB = parameterAsFields( parameters, QStringLiteral( "INTERSECT_FIELDS" ), context );
QgsAttributeList fieldIndicesA = QgsProcessingUtils::fieldNamesToIndices( fieldsA, sourceA->fields() );
QgsAttributeList fieldIndicesB = QgsProcessingUtils::fieldNamesToIndices( fieldsB, sourceB->fields() );
QString intersectFieldsPrefix = parameterAsString( parameters, QStringLiteral( "INTERSECT_FIELDS_PREFIX" ), context );
QgsFields outFields = QgsProcessingUtils::combineFields(
QgsProcessingUtils::indicesToFields( fieldIndicesA, sourceA->fields() ),
QgsProcessingUtils::indicesToFields( fieldIndicesB, sourceB->fields() ),
intersectFieldsPrefix );
QString dest;
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, outFields, QgsWkbTypes::Point, sourceA->sourceCrs(), QgsFeatureSink::RegeneratePrimaryKey ) );
if ( !sink )
throw QgsProcessingException( invalidSinkError( parameters, QStringLiteral( "OUTPUT" ) ) );
QgsSpatialIndex spatialIndex( sourceB->getFeatures( QgsFeatureRequest().setNoAttributes().setDestinationCrs( sourceA->sourceCrs(), context.transformContext() ) ), feedback );
QgsFeature outFeature;
QgsFeatureIterator features = sourceA->getFeatures( QgsFeatureRequest().setSubsetOfAttributes( fieldIndicesA ) );
double step = sourceA->featureCount() > 0 ? 100.0 / sourceA->featureCount() : 1;
int i = 0;
QgsFeature inFeatureA;
while ( features.nextFeature( inFeatureA ) )
{
i++;
if ( feedback->isCanceled() )
{
break;
}
if ( !inFeatureA.hasGeometry() )
continue;
QgsGeometry inGeom = inFeatureA.geometry();
QgsFeatureIds lines = spatialIndex.intersects( inGeom.boundingBox() ).toSet();
if ( !lines.empty() )
{
// use prepared geometries for faster intersection tests
std::unique_ptr< QgsGeometryEngine > engine( QgsGeometry::createGeometryEngine( inGeom.constGet() ) );
engine->prepareGeometry();
QgsFeatureRequest request = QgsFeatureRequest().setFilterFids( lines );
request.setDestinationCrs( sourceA->sourceCrs(), context.transformContext() );
request.setSubsetOfAttributes( fieldIndicesB );
QgsFeature inFeatureB;
QgsFeatureIterator featuresB = sourceB->getFeatures( request );
while ( featuresB.nextFeature( inFeatureB ) )
{
if ( feedback->isCanceled() )
{
break;
}
QgsGeometry tmpGeom = inFeatureB.geometry();
if ( engine->intersects( tmpGeom.constGet() ) )
{
QgsMultiPointXY points;
QgsGeometry intersectGeom = inGeom.intersection( tmpGeom );
QgsAttributes outAttributes;
for ( int a : qgis::as_const( fieldIndicesA ) )
{
outAttributes.append( inFeatureA.attribute( a ) );
}
for ( int b : qgis::as_const( fieldIndicesB ) )
{
outAttributes.append( inFeatureB.attribute( b ) );
}
if ( QgsWkbTypes::flatType( intersectGeom.wkbType() ) == QgsWkbTypes::GeometryCollection )
{
const QVector<QgsGeometry> geomCollection = intersectGeom.asGeometryCollection();
for ( const QgsGeometry &part : geomCollection )
{
if ( part.type() == QgsWkbTypes::PointGeometry )
{
if ( part.isMultipart() )
{
points = part.asMultiPoint();
}
else
{
points.append( part.asPoint() );
}
}
}
}
else if ( intersectGeom.type() == QgsWkbTypes::PointGeometry )
{
if ( intersectGeom.isMultipart() )
{
points = intersectGeom.asMultiPoint();
}
else
{
points.append( intersectGeom.asPoint() );
}
}
for ( const QgsPointXY &j : qgis::as_const( points ) )
{
outFeature.setGeometry( QgsGeometry::fromPointXY( j ) );
outFeature.setAttributes( outAttributes );
sink->addFeature( outFeature, QgsFeatureSink::FastInsert );
}
}
}
}
feedback->setProgress( i * step );
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
return outputs;
}
void checkDock::errorListClicked( const QModelIndex& index )
{
int row = index.row();
QgsRectangle r = mErrorList[row]->boundingBox();
r.scale( 1.5 );
QgsMapCanvas* canvas = qgsInterface->mapCanvas();
canvas->setExtent( r );
canvas->refresh();
mFixBox->clear();
mFixBox->addItems( mErrorList[row]->fixNames() );
mFixBox->setCurrentIndex( mFixBox->findText( tr( "Select automatic fix" ) ) );
QgsFeature f;
QgsGeometry* g;
FeatureLayer fl = mErrorList[row]->featurePairs().first();
if ( !fl.layer )
{
QgsMessageLog::logMessage( tr( "Invalid first layer" ), tr( "Topology plugin" ) );
return;
}
//fl1.layer->getFeatures( QgsFeatureRequest().setFilterFid( fl1.feature.id() ) ).nextFeature( f1 );
fl.layer->getFeatures( QgsFeatureRequest().setFilterFid( fl.feature.id() ) ).nextFeature( f );
g = f.geometry();
if ( !g )
{
QgsMessageLog::logMessage( tr( "Invalid first geometry" ), tr( "Topology plugin" ) );
QMessageBox::information( this, tr( "Topology test" ), tr( "Feature not found in the layer.\nThe layer has probably changed.\nRun topology check again." ) );
return;
}
clearVertexMarkers();
// use vertex marker when highlighting a point
// and rubber band otherwise
if ( g->type() == QGis::Point )
{
mVMFeature1 = new QgsVertexMarker( canvas );
mVMFeature1->setIconType( QgsVertexMarker::ICON_X );
mVMFeature1->setPenWidth( 5 );
mVMFeature1->setIconSize( 5 );
mVMFeature1->setColor( "blue" );
mVMFeature1->setCenter( g->asPoint() );
}
else
mRBFeature1->setToGeometry( g, fl.layer );
fl = mErrorList[row]->featurePairs()[1];
if ( !fl.layer )
{
QgsMessageLog::logMessage( tr( "Invalid second layer" ), tr( "Topology plugin" ) );
return;
}
fl.layer->getFeatures( QgsFeatureRequest().setFilterFid( fl.feature.id() ) ).nextFeature( f );
g = f.geometry();
if ( !g )
{
QgsMessageLog::logMessage( tr( "Invalid second geometry" ), tr( "Topology plugin" ) );
QMessageBox::information( this, tr( "Topology test" ), tr( "Feature not found in the layer.\nThe layer has probably changed.\nRun topology check again." ) );
return;
}
if ( g->type() == QGis::Point )
{
mVMFeature2 = new QgsVertexMarker( canvas );
mVMFeature2->setIconType( QgsVertexMarker::ICON_BOX );
mVMFeature2->setPenWidth( 5 );
mVMFeature2->setIconSize( 5 );
mVMFeature2->setColor( "green" );
mVMFeature2->setCenter( g->asPoint() );
}
else
mRBFeature2->setToGeometry( g, fl.layer );
if ( !mErrorList[row]->conflict() )
{
QgsMessageLog::logMessage( tr( "Invalid conflict" ), tr( "Topology plugin" ) );
return;
}
if ( mErrorList[row]->conflict()->type() == QGis::Point )
{
mVMConflict = new QgsVertexMarker( canvas );
mVMConflict->setIconType( QgsVertexMarker::ICON_BOX );
mVMConflict->setPenWidth( 5 );
mVMConflict->setIconSize( 5 );
mVMConflict->setColor( "red" );
mVMConflict->setCenter( mErrorList[row]->conflict()->asPoint() );
}
else
mRBConflict->setToGeometry( mErrorList[row]->conflict(), fl.layer );
}
int QgsTransectSample::createSample( QProgressDialog* pd )
{
Q_UNUSED( pd );
if ( !mStrataLayer || !mStrataLayer->isValid() )
{
return 1;
}
if ( !mBaselineLayer || !mBaselineLayer->isValid() )
{
return 2;
}
//stratum id is not necessarily an integer
QVariant::Type stratumIdType = QVariant::Int;
if ( !mStrataIdAttribute.isEmpty() )
{
stratumIdType = mStrataLayer->pendingFields().field( mStrataIdAttribute ).type();
}
//create vector file writers for output
QgsFields outputPointFields;
outputPointFields.append( QgsField( "id", stratumIdType ) );
outputPointFields.append( QgsField( "station_id", QVariant::Int ) );
outputPointFields.append( QgsField( "stratum_id", stratumIdType ) );
outputPointFields.append( QgsField( "station_code", QVariant::String ) );
outputPointFields.append( QgsField( "start_lat", QVariant::Double ) );
outputPointFields.append( QgsField( "start_long", QVariant::Double ) );
QgsVectorFileWriter outputPointWriter( mOutputPointLayer, "utf-8", outputPointFields, QGis::WKBPoint,
&( mStrataLayer->crs() ) );
if ( outputPointWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 3;
}
outputPointFields.append( QgsField( "bearing", QVariant::Double ) ); //add bearing attribute for lines
QgsVectorFileWriter outputLineWriter( mOutputLineLayer, "utf-8", outputPointFields, QGis::WKBLineString,
&( mStrataLayer->crs() ) );
if ( outputLineWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 4;
}
QgsFields usedBaselineFields;
usedBaselineFields.append( QgsField( "stratum_id", stratumIdType ) );
usedBaselineFields.append( QgsField( "ok", QVariant::String ) );
QgsVectorFileWriter usedBaselineWriter( mUsedBaselineLayer, "utf-8", usedBaselineFields, QGis::WKBLineString,
&( mStrataLayer->crs() ) );
if ( usedBaselineWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 5;
}
//debug: write clipped buffer bounds with stratum id to same directory as out_point
QFileInfo outputPointInfo( mOutputPointLayer );
QString bufferClipLineOutput = outputPointInfo.absolutePath() + "/out_buffer_clip_line.shp";
QgsFields bufferClipLineFields;
bufferClipLineFields.append( QgsField( "id", stratumIdType ) );
QgsVectorFileWriter bufferClipLineWriter( bufferClipLineOutput, "utf-8", bufferClipLineFields, QGis::WKBLineString, &( mStrataLayer->crs() ) );
//configure distanceArea depending on minDistance units and output CRS
QgsDistanceArea distanceArea;
distanceArea.setSourceCrs( mStrataLayer->crs().srsid() );
if ( mMinDistanceUnits == Meters )
{
distanceArea.setEllipsoidalMode( true );
}
else
{
distanceArea.setEllipsoidalMode( false );
}
//possibility to transform output points to lat/long
QgsCoordinateTransform toLatLongTransform( mStrataLayer->crs(), QgsCoordinateReferenceSystem( 4326, QgsCoordinateReferenceSystem::EpsgCrsId ) );
//init random number generator
mt_srand( QTime::currentTime().msec() );
QgsFeatureRequest fr;
fr.setSubsetOfAttributes( QStringList() << mStrataIdAttribute << mMinDistanceAttribute << mNPointsAttribute, mStrataLayer->pendingFields() );
QgsFeatureIterator strataIt = mStrataLayer->getFeatures( fr );
QgsFeature fet;
int nTotalTransects = 0;
int nFeatures = 0;
if ( pd )
{
pd->setMaximum( mStrataLayer->featureCount() );
}
while ( strataIt.nextFeature( fet ) )
{
if ( pd )
{
pd->setValue( nFeatures );
}
if ( pd && pd->wasCanceled() )
{
break;
}
if ( !fet.constGeometry() )
{
continue;
}
const QgsGeometry* strataGeom = fet.constGeometry();
//find baseline for strata
QVariant strataId = fet.attribute( mStrataIdAttribute );
QgsGeometry* baselineGeom = findBaselineGeometry( strataId.isValid() ? strataId : -1 );
if ( !baselineGeom )
{
continue;
}
double minDistance = fet.attribute( mMinDistanceAttribute ).toDouble();
double minDistanceLayerUnits = minDistance;
//if minDistance is in meters and the data in degrees, we need to apply a rough conversion for the buffer distance
double bufferDist = bufferDistance( minDistance );
if ( mMinDistanceUnits == Meters && mStrataLayer->crs().mapUnits() == QGis::DecimalDegrees )
{
minDistanceLayerUnits = minDistance / 111319.9;
}
QgsGeometry* clippedBaseline = strataGeom->intersection( baselineGeom );
if ( !clippedBaseline || clippedBaseline->wkbType() == QGis::WKBUnknown )
{
delete clippedBaseline;
continue;
}
QgsGeometry* bufferLineClipped = clipBufferLine( strataGeom, clippedBaseline, bufferDist );
if ( !bufferLineClipped )
{
delete clippedBaseline;
continue;
}
//save clipped baseline to file
QgsFeature blFeature;
blFeature.setGeometry( *clippedBaseline );
blFeature.setAttribute( "stratum_id", strataId );
blFeature.setAttribute( "ok", "f" );
usedBaselineWriter.addFeature( blFeature );
//start loop to create random points along the baseline
int nTransects = fet.attribute( mNPointsAttribute ).toInt();
int nCreatedTransects = 0;
int nIterations = 0;
int nMaxIterations = nTransects * 50;
QgsSpatialIndex sIndex; //to check minimum distance
QMap< QgsFeatureId, QgsGeometry* > lineFeatureMap;
while ( nCreatedTransects < nTransects && nIterations < nMaxIterations )
{
double randomPosition = (( double )mt_rand() / MD_RAND_MAX ) * clippedBaseline->length();
QgsGeometry* samplePoint = clippedBaseline->interpolate( randomPosition );
++nIterations;
if ( !samplePoint )
{
continue;
}
QgsPoint sampleQgsPoint = samplePoint->asPoint();
QgsPoint latLongSamplePoint = toLatLongTransform.transform( sampleQgsPoint );
QgsFeature samplePointFeature;
samplePointFeature.setGeometry( samplePoint );
samplePointFeature.setAttribute( "id", nTotalTransects + 1 );
samplePointFeature.setAttribute( "station_id", nCreatedTransects + 1 );
samplePointFeature.setAttribute( "stratum_id", strataId );
samplePointFeature.setAttribute( "station_code", strataId.toString() + "_" + QString::number( nCreatedTransects + 1 ) );
samplePointFeature.setAttribute( "start_lat", latLongSamplePoint.y() );
samplePointFeature.setAttribute( "start_long", latLongSamplePoint.x() );
//find closest point on clipped buffer line
QgsPoint minDistPoint;
int afterVertex;
if ( bufferLineClipped->closestSegmentWithContext( sampleQgsPoint, minDistPoint, afterVertex ) < 0 )
{
continue;
}
//bearing between sample point and min dist point (transect direction)
double bearing = distanceArea.bearing( sampleQgsPoint, minDistPoint ) / M_PI * 180.0;
QgsPolyline sampleLinePolyline;
QgsPoint ptFarAway( sampleQgsPoint.x() + ( minDistPoint.x() - sampleQgsPoint.x() ) * 1000000,
sampleQgsPoint.y() + ( minDistPoint.y() - sampleQgsPoint.y() ) * 1000000 );
QgsPolyline lineFarAway;
lineFarAway << sampleQgsPoint << ptFarAway;
QgsGeometry* lineFarAwayGeom = QgsGeometry::fromPolyline( lineFarAway );
QgsGeometry* lineClipStratum = lineFarAwayGeom->intersection( strataGeom );
if ( !lineClipStratum )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//cancel if distance between sample point and line is too large (line does not start at point
if ( lineClipStratum->distance( *samplePoint ) > 0.000001 )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//if lineClipStratum is a multiline, take the part line closest to sampleQgsPoint
if ( lineClipStratum->wkbType() == QGis::WKBMultiLineString
|| lineClipStratum->wkbType() == QGis::WKBMultiLineString25D )
{
QgsGeometry* singleLine = closestMultilineElement( sampleQgsPoint, lineClipStratum );
if ( singleLine )
{
delete lineClipStratum;
lineClipStratum = singleLine;
}
}
//cancel if length of lineClipStratum is too small
double transectLength = distanceArea.measure( lineClipStratum );
if ( transectLength < mMinTransectLength )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//search closest existing profile. Cancel if dist < minDist
if ( otherTransectWithinDistance( lineClipStratum, minDistanceLayerUnits, minDistance, sIndex, lineFeatureMap, distanceArea ) )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
QgsFeatureId fid( nCreatedTransects );
QgsFeature sampleLineFeature( fid );
sampleLineFeature.setGeometry( lineClipStratum );
sampleLineFeature.setAttribute( "id", nTotalTransects + 1 );
sampleLineFeature.setAttribute( "station_id", nCreatedTransects + 1 );
sampleLineFeature.setAttribute( "stratum_id", strataId );
sampleLineFeature.setAttribute( "station_code", strataId.toString() + "_" + QString::number( nCreatedTransects + 1 ) );
sampleLineFeature.setAttribute( "start_lat", latLongSamplePoint.y() );
sampleLineFeature.setAttribute( "start_long", latLongSamplePoint.x() );
sampleLineFeature.setAttribute( "bearing", bearing );
outputLineWriter.addFeature( sampleLineFeature );
//add point to file writer here.
//It can only be written if the corresponding transect has been as well
outputPointWriter.addFeature( samplePointFeature );
sIndex.insertFeature( sampleLineFeature );
Q_NOWARN_DEPRECATED_PUSH
lineFeatureMap.insert( fid, sampleLineFeature.geometryAndOwnership() );
Q_NOWARN_DEPRECATED_POP
delete lineFarAwayGeom;
++nTotalTransects;
++nCreatedTransects;
}
delete clippedBaseline;
QgsFeature bufferClipFeature;
bufferClipFeature.setGeometry( bufferLineClipped );
bufferClipFeature.setAttribute( "id", strataId );
bufferClipLineWriter.addFeature( bufferClipFeature );
//delete bufferLineClipped;
//delete all line geometries in spatial index
QMap< QgsFeatureId, QgsGeometry* >::iterator featureMapIt = lineFeatureMap.begin();
for ( ; featureMapIt != lineFeatureMap.end(); ++featureMapIt )
{
delete( featureMapIt.value() );
}
lineFeatureMap.clear();
delete baselineGeom;
++nFeatures;
}
if ( pd )
{
pd->setValue( mStrataLayer->featureCount() );
}
return 0;
}
// Slot called when the menu item is triggered
// If you created more menu items / toolbar buttons in initiGui, you should
// create a separate handler for each action - this single run() method will
// not be enough
void Heatmap::run()
{
HeatmapGui d( mQGisIface->mainWindow(), QgisGui::ModalDialogFlags, &mSessionSettings );
if ( d.exec() == QDialog::Accepted )
{
// everything runs here
// Get the required data from the dialog
QgsRectangle myBBox = d.bbox();
int columns = d.columns();
int rows = d.rows();
double cellsize = d.cellSizeX(); // or d.cellSizeY(); both have the same value
mDecay = d.decayRatio();
int kernelShape = d.kernelShape();
// Start working on the input vector
QgsVectorLayer* inputLayer = d.inputVectorLayer();
// Getting the rasterdataset in place
GDALAllRegister();
GDALDataset *emptyDataset;
GDALDriver *myDriver;
myDriver = GetGDALDriverManager()->GetDriverByName( d.outputFormat().toUtf8() );
if ( myDriver == NULL )
{
QMessageBox::information( 0, tr( "GDAL driver error" ), tr( "Cannot open the driver for the specified format" ) );
return;
}
double geoTransform[6] = { myBBox.xMinimum(), cellsize, 0, myBBox.yMinimum(), 0, cellsize };
emptyDataset = myDriver->Create( d.outputFilename().toUtf8(), columns, rows, 1, GDT_Float32, NULL );
emptyDataset->SetGeoTransform( geoTransform );
// Set the projection on the raster destination to match the input layer
emptyDataset->SetProjection( inputLayer->crs().toWkt().toLocal8Bit().data() );
GDALRasterBand *poBand;
poBand = emptyDataset->GetRasterBand( 1 );
poBand->SetNoDataValue( NO_DATA );
float* line = ( float * ) CPLMalloc( sizeof( float ) * columns );
for ( int i = 0; i < columns ; i++ )
{
line[i] = NO_DATA;
}
// Write the empty raster
for ( int i = 0; i < rows ; i++ )
{
poBand->RasterIO( GF_Write, 0, i, columns, 1, line, columns, 1, GDT_Float32, 0, 0 );
}
CPLFree( line );
//close the dataset
GDALClose(( GDALDatasetH ) emptyDataset );
// open the raster in GA_Update mode
GDALDataset *heatmapDS;
heatmapDS = ( GDALDataset * ) GDALOpen( d.outputFilename().toUtf8(), GA_Update );
if ( !heatmapDS )
{
QMessageBox::information( 0, tr( "Raster update error" ), tr( "Could not open the created raster for updating. The heatmap was not generated." ) );
return;
}
poBand = heatmapDS->GetRasterBand( 1 );
QgsAttributeList myAttrList;
int rField = 0;
int wField = 0;
// Handle different radius options
double radius;
double radiusToMapUnits = 1;
int myBuffer = 0;
if ( d.variableRadius() )
{
rField = d.radiusField();
myAttrList.append( rField );
QgsDebugMsg( QString( "Radius Field index received: %1" ).arg( rField ) );
// If not using map units, then calculate a conversion factor to convert the radii to map units
if ( d.radiusUnit() == HeatmapGui::Meters )
{
radiusToMapUnits = mapUnitsOf( 1, inputLayer->crs() );
}
}
else
{
radius = d.radius(); // radius returned by d.radius() is already in map units
myBuffer = bufferSize( radius, cellsize );
}
if ( d.weighted() )
{
wField = d.weightField();
myAttrList.append( wField );
}
// This might have attributes or mightnot have attibutes at all
// based on the variableRadius() and weighted()
QgsFeatureIterator fit = inputLayer->getFeatures( QgsFeatureRequest().setSubsetOfAttributes( myAttrList ) );
int totalFeatures = inputLayer->featureCount();
int counter = 0;
QProgressDialog p( tr( "Creating heatmap" ), tr( "Abort" ), 0, totalFeatures, mQGisIface->mainWindow() );
p.setWindowModality( Qt::ApplicationModal );
p.show();
QgsFeature myFeature;
while ( fit.nextFeature( myFeature ) )
{
counter++;
p.setValue( counter );
QApplication::processEvents();
if ( p.wasCanceled() )
{
QMessageBox::information( 0, tr( "Heatmap generation aborted" ), tr( "QGIS will now load the partially-computed raster." ) );
break;
}
QgsGeometry* myPointGeometry;
myPointGeometry = myFeature.geometry();
// convert the geometry to point
QgsPoint myPoint;
myPoint = myPointGeometry->asPoint();
// avoiding any empty points or out of extent points
if (( myPoint.x() < myBBox.xMinimum() ) || ( myPoint.y() < myBBox.yMinimum() )
|| ( myPoint.x() > myBBox.xMaximum() ) || ( myPoint.y() > myBBox.yMaximum() ) )
{
continue;
}
// If radius is variable then fetch it and calculate new pixel buffer size
if ( d.variableRadius() )
{
radius = myFeature.attribute( rField ).toDouble() * radiusToMapUnits;
myBuffer = bufferSize( radius, cellsize );
}
int blockSize = 2 * myBuffer + 1; //Block SIDE would be more appropriate
// calculate the pixel position
unsigned int xPosition, yPosition;
xPosition = (( myPoint.x() - myBBox.xMinimum() ) / cellsize ) - myBuffer;
yPosition = (( myPoint.y() - myBBox.yMinimum() ) / cellsize ) - myBuffer;
// get the data
float *dataBuffer = ( float * ) CPLMalloc( sizeof( float ) * blockSize * blockSize );
poBand->RasterIO( GF_Read, xPosition, yPosition, blockSize, blockSize,
dataBuffer, blockSize, blockSize, GDT_Float32, 0, 0 );
double weight = 1.0;
if ( d.weighted() )
{
weight = myFeature.attribute( wField ).toDouble();
}
for ( int xp = 0; xp <= myBuffer; xp++ )
{
for ( int yp = 0; yp <= myBuffer; yp++ )
{
double distance = sqrt( pow( xp, 2.0 ) + pow( yp, 2.0 ) );
// is pixel outside search bandwidth of feature?
if ( distance > myBuffer )
{
continue;
}
double pixelValue = weight * calculateKernelValue( distance, myBuffer, kernelShape );
// clearing anamolies along the axes
if ( xp == 0 && yp == 0 )
{
pixelValue /= 4;
}
else if ( xp == 0 || yp == 0 )
{
pixelValue /= 2;
}
int pos[4];
pos[0] = ( myBuffer + xp ) * blockSize + ( myBuffer + yp );
pos[1] = ( myBuffer + xp ) * blockSize + ( myBuffer - yp );
pos[2] = ( myBuffer - xp ) * blockSize + ( myBuffer + yp );
pos[3] = ( myBuffer - xp ) * blockSize + ( myBuffer - yp );
for ( int p = 0; p < 4; p++ )
{
if ( dataBuffer[ pos[p] ] == NO_DATA )
{
dataBuffer[ pos[p] ] = 0;
}
dataBuffer[ pos[p] ] += pixelValue;
}
}
}
poBand->RasterIO( GF_Write, xPosition, yPosition, blockSize, blockSize,
dataBuffer, blockSize, blockSize, GDT_Float32, 0, 0 );
CPLFree( dataBuffer );
}
// Finally close the dataset
GDALClose(( GDALDatasetH ) heatmapDS );
// Open the file in QGIS window
mQGisIface->addRasterLayer( d.outputFilename(), QFileInfo( d.outputFilename() ).baseName() );
}
}
void QgsDxfExport::addFeature( const QgsSymbolV2RenderContext& ctx, const QString& layer, const QgsSymbolLayerV2* symbolLayer, const QgsSymbolV2* symbol )
{
const QgsFeature* fet = ctx.feature();
if ( !fet )
{
return;
}
QgsGeometry* geom = fet->geometry();
if ( geom )
{
int c = 0;
if ( mSymbologyExport != NoSymbology )
{
c = colorFromSymbolLayer( symbolLayer, ctx );
}
double width = -1;
if ( mSymbologyExport != NoSymbology && symbolLayer )
{
width = symbolLayer->dxfWidth( *this, ctx );
}
QString lineStyleName = "CONTINUOUS";
if ( mSymbologyExport != NoSymbology )
{
lineStyleName = lineStyleFromSymbolLayer( symbolLayer );
}
QGis::WkbType geometryType = geom->wkbType();
//single point
if ( geometryType == QGis::WKBPoint || geometryType == QGis::WKBPoint25D )
{
writePoint( geom->asPoint(), layer, c, fet, symbolLayer, symbol );
}
//multipoint
if ( geometryType == QGis::WKBMultiPoint || geometryType == QGis::WKBMultiPoint25D )
{
QgsMultiPoint multiPoint = geom->asMultiPoint();
QgsMultiPoint::const_iterator it = multiPoint.constBegin();
for ( ; it != multiPoint.constEnd(); ++it )
{
writePoint( *it, layer, c, fet, symbolLayer, symbol );
}
}
//single line
if ( geometryType == QGis::WKBLineString || geometryType == QGis::WKBLineString25D )
{
writePolyline( geom->asPolyline(), layer, lineStyleName, c, width, false );
}
//multiline
if ( geometryType == QGis::WKBMultiLineString || geometryType == QGis::WKBMultiLineString25D )
{
QgsMultiPolyline multiLine = geom->asMultiPolyline();
QgsMultiPolyline::const_iterator lIt = multiLine.constBegin();
for ( ; lIt != multiLine.constEnd(); ++lIt )
{
writePolyline( *lIt, layer, lineStyleName, c, width, false );
}
}
//polygon
if ( geometryType == QGis::WKBPolygon || geometryType == QGis::WKBPolygon25D )
{
QgsPolygon polygon = geom->asPolygon();
QgsPolygon::const_iterator polyIt = polygon.constBegin();
for ( ; polyIt != polygon.constEnd(); ++polyIt ) //iterate over rings
{
writePolyline( *polyIt, layer, lineStyleName, c, width, true );
}
}
//multipolygon or polygon
if ( geometryType == QGis::WKBMultiPolygon || geometryType == QGis::WKBMultiPolygon25D )
{
QgsMultiPolygon mp = geom->asMultiPolygon();
QgsMultiPolygon::const_iterator mpIt = mp.constBegin();
for ( ; mpIt != mp.constEnd(); ++mpIt )
{
QgsPolygon::const_iterator polyIt = mpIt->constBegin();
for ( ; polyIt != mpIt->constEnd(); ++polyIt )
{
writePolyline( *polyIt, layer, lineStyleName, c, width, true );
}
}
}
}
}
void checkDock::errorListClicked(const QModelIndex& index)
{
int row = index.row();
QgsRectangle r = mErrorList[row]->boundingBox();
r.scale(1.5);
mQgisApp->mapCanvas()->setExtent(r);
mQgisApp->mapCanvas()->refresh();
mFixBox->clear();
mFixBox->addItems(mErrorList[row]->fixNames());
mFixBox->setCurrentIndex(mFixBox->findText("Select automatic fix"));
QgsFeature f;
QgsGeometry* g;
FeatureLayer fl = mErrorList[row]->featurePairs().first();
if (!fl.layer)
{
std::cout << "invalid layer 1\n";
return;
}
fl.layer->featureAtId(fl.feature.id(), f, true, false);
g = f.geometry();
if (!g)
{
std::cout << "invalid geometry 1\n"<<std::flush;
QMessageBox::information(this, "Topology test", "Feature not found in the layer.\nThe layer has probably changed.\nRun topology check again.");
return;
}
clearVertexMarkers();
// use vertex marker when highlighting a point
// and rubber band otherwise
if (g->type() == QGis::Point)
{
mVMFeature1 = new QgsVertexMarker(mQgisApp->mapCanvas());
mVMFeature1->setIconType(QgsVertexMarker::ICON_BOX);
mVMConflict->setPenWidth(5);
mVMFeature1->setIconSize(5);
mVMFeature1->setColor("blue");
mVMFeature1->setCenter(g->asPoint());
}
else
mRBFeature1->setToGeometry(g, fl.layer);
fl = mErrorList[row]->featurePairs()[1];
if (!fl.layer)
{
std::cout << "invalid layer 2\n";
return;
}
fl.layer->featureAtId(fl.feature.id(), f, true, false);
g = f.geometry();
if (!g)
{
std::cout << "invalid geometry 2\n" << std::flush;
QMessageBox::information(this, "Topology test", "Feature not found in the layer.\nThe layer has probably changed.\nRun topology check again.");
return;
}
if (g->type() == QGis::Point)
{
mVMFeature2 = new QgsVertexMarker(mQgisApp->mapCanvas());
mVMFeature2->setIconType(QgsVertexMarker::ICON_BOX);
mVMConflict->setPenWidth(5);
mVMConflict->setIconSize(5);
mVMFeature2->setColor("red");
mVMFeature2->setCenter(g->asPoint());
}
else
mRBFeature2->setToGeometry(g, fl.layer);
if (!mErrorList[row]->conflict())
{
std::cout << "invalid conflict\n" << std::flush;
return;
}
if (mErrorList[row]->conflict()->type() == QGis::Point)
{
mVMConflict = new QgsVertexMarker(mQgisApp->mapCanvas());
mVMConflict->setIconType(QgsVertexMarker::ICON_BOX);
mVMConflict->setPenWidth(5);
mVMConflict->setIconSize(5);
mVMConflict->setColor("gold");
mVMConflict->setCenter(mErrorList[row]->conflict()->asPoint());
}
else
mRBConflict->setToGeometry(mErrorList[row]->conflict(), fl.layer);
}