void UnfragmentMemory(TBool aDiscard, TBool aTouchMemory, TBool aFragThread)
{
test_Value(aTouchMemory, !aTouchMemory || !aFragThread);
if (aTouchMemory && !ManualTest)
{
TouchDataStop = ETrue;
User::WaitForRequest(TouchStatus);
test_Equal(EExitKill, TouchThread.ExitType());
test_KErrNone(TouchThread.ExitReason());
CLOSE_AND_WAIT(TouchThread);
}
if (aFragThread)
{
FragThreadStop = ETrue;
User::WaitForRequest(FragStatus);
test_Equal(EExitKill, FragThread.ExitType());
test_KErrNone(FragThread.ExitReason());
CLOSE_AND_WAIT(FragThread);
}
else
UnfragmentMemoryFunc();
if (CacheSizeAdjustable)
test_KErrNone(DPTest::SetCacheSize(OrigMinCacheSize, OrigMaxCacheSize));
CLOSE_AND_WAIT(Chunk);
}
static void ConfirmPanicReason(RThread aThread, TInt aExpectedReason)
/**
Confirm that the supplied thread was panicked with KKmsClientPanicCat
category and the supplied reason.
@param aThread Thread whcih should have been panicked with the supplied reason.
@param aExpectedReason Reason with which thread should have been panicked.
*/
{
TExitCategoryName exitCat = aThread.ExitCategory();
test.Printf(_L("thread exit with type=%d, cat=\"%S\", reason=%d\n"), aThread.ExitType(), &exitCat, aThread.ExitReason());
test(aThread.ExitType() == EExitPanic);
test(exitCat == KKmsClientPanicCat);
test(aThread.ExitReason() == aExpectedReason);
}
// ---------------------------------------------------------------------------
// Removes all requests belonging to a terminated client.
// ---------------------------------------------------------------------------
//
void CPolicyClientRequestHandler::RemoveDeadClients()
{
// Lint seems to have some trouble identifying the TThreadId class.
// Due to this, Lint will report several errors here that are incorrect.
// These errors are disabled.
/*lint -e10 -e1013 -e1055 -e746 -e747 */
RThread client;
for( TInt i = iControlPolicyClients.Count() - 1; i >= 0; i--)
{
TInt err = client.Open(iControlPolicyClients[i]->iClientId.Id());
if(err == KErrNone)
{
if(client.ExitType() != EExitPending)
{
//Client is dead, remove from list.
iControlPolicyClients[i]->iMessage = RMessage2(); //Null message so destructor wont try to complete.
delete iControlPolicyClients[i];
iControlPolicyClients.Remove(i);
}
client.Close();
}
else
{
//Could not open client, client handle was invalid.
//So clean it up from list too.
iControlPolicyClients[i]->iMessage = RMessage2(); //Null message so destructor wont try to complete.
delete iControlPolicyClients[i];
iControlPolicyClients.Remove(i);
}
}
/*lint +e10 +e1013 +e1055 +e746 +e747 */
}
// ----------------------------------------------------------------------------
// CSIPClientResolver::CreateWorkerThreadL
// ----------------------------------------------------------------------------
//
void CSIPClientResolver::CreateWorkerThreadL()
{
TName threadName(KWorkerThreadName);
// Append a random number to make the name unique
const TInt KThreadIdWidth = 10;
threadName.AppendNumFixedWidthUC(Math::Random(), EHex, KThreadIdWidth);
RThread thread;
TInt err = thread.Create(threadName,
WorkerThreadFunction,
KDefaultStackSize,
NULL, // Use the same heap as the main thread
this);
User::LeaveIfError(err);
TRequestStatus status;
thread.Logon(status);
thread.Resume();
User::WaitForRequest(status);
TExitType exitType = thread.ExitType();
thread.Close();
if (exitType == EExitPanic)
{
User::Leave(KErrGeneral);
}
User::LeaveIfError(status.Int());
}
// main loop
//
GLDEF_C TInt E32Main()
{
__UHEAP_MARK;
CTrapCleanup* theCleanup = CTrapCleanup::New(); // Install exception handler
// Create a new thread for running tests in
RThread testThread;
TInt err = testThread.Create(KTestThreadName, TestEntryPoint, KDefaultStackSize,
KMinHeapSize, KMaxHeapSize, NULL);
if(err == KErrNone)
{
testThread.Resume();
}
else
{
return err;
}
// Kick off test thread and wait for it to exit
TRequestStatus tStat;
testThread.Logon(tStat);
User::WaitForRequest(tStat);
// Log if paniced
if(testThread.ExitType() == EExitPanic)
{
TRAP_IGNORE(LogOnPanicL(testThread));
}
testThread.Close();
delete theCleanup;
__UHEAP_MARKEND;
return KErrNone;
}
TExitDetails LaunchTestThread(const TDesC& aThreadName, TestFunction aFunction)
{
RThread thread;
thread.Create(aThreadName, &TestFunctionLauncher, KDefaultStackSize, NULL, (TAny*)aFunction);
TRequestStatus threadStat;
thread.Logon(threadStat);
TBool jit = User::JustInTime();
User::SetJustInTime(EFalse);
thread.Resume();
User::WaitForRequest(threadStat);
User::SetJustInTime(jit);
TExitDetails exitDetails;
exitDetails.iCategory = thread.ExitCategory();
exitDetails.iReason = thread.ExitReason();
exitDetails.iExitType = thread.ExitType();
thread.Close();
return exitDetails;
}
void TestServerPanic()
{
TRequestStatus status;
test_KErrNone(TheSemaphore.CreateLocal(0));
RDebug::Printf("Main: start server");
RThread serverThread;
test_KErrNone(serverThread.Create(_L("server"), ServerThread, 4096, NULL, NULL));
serverThread.Rendezvous(status);
serverThread.Resume();
User::WaitForRequest(status);
test_KErrNone(status.Int());
RDebug::Printf("Main: start client");
RProcess clientProcess;
test_KErrNone(clientProcess.Create(KMyName, _L("client")));
clientProcess.Resume();
clientProcess.Logon(status);
User::WaitForRequest(status);
test_KErrNone(clientProcess.ExitReason());
test_Equal(EExitKill, clientProcess.ExitType());
RDebug::Printf("Main: kick server");
TheSemaphore.Signal();
RDebug::Printf("Main: wait for server to exit");
serverThread.Logon(status);
User::WaitForRequest(status);
test_KErrNone(serverThread.ExitReason());
test_Equal(EExitKill, serverThread.ExitType());
User::After(1);
RDebug::Printf("Main: exit");
}
TInt RConsoleProxy::DoConnect(TServerParams* aParams, const TDesC& aThreadNameBase, TInt aStackSize, TInt aHeapMinSize, TInt aHeapMaxSize, RServer2& aServer, RThread& aServerThread)
{
TName threadName;
RThread server;
TInt threadId = 0;
_LIT(KThreadIdFmt, "%08x");
TInt err;
do
{
threadName = aThreadNameBase.Left(threadName.MaxLength()-8);
threadName.AppendFormat(KThreadIdFmt, threadId);
err = server.Create(threadName, &ServerThreadFunction, aStackSize, aHeapMinSize, aHeapMaxSize, aParams);
++threadId;
} while (err==KErrAlreadyExists);
if (err!=KErrNone) return err;
TRequestStatus rendezvous;
server.Rendezvous(rendezvous);
if (rendezvous == KRequestPending)
{
server.Resume();
}
User::WaitForRequest(rendezvous);
err = rendezvous.Int();
if (server.ExitType() != EExitPending && err >= 0) err = KErrDied;
if (err==KErrNone)
{
err = Connect(aParams->iServer);
}
aServer = aParams->iServer;
aServerThread = server;
return err;
}
void TestCommitDecommit(RPageMove& pagemove, RChunk& aChunk)
{
test.Printf(_L("Attempt to move a page while it is being committed and decommited\n"));
RThread thread;
TRequestStatus s;
test_KErrNone(thread.Create(_L("CommitDecommit"), &CommitDecommit, KDefaultStackSize, NULL, (TAny*)&aChunk));
thread.Logon(s);
thread.SetPriority(EPriorityMore);
thread.Resume();
TUint8* firstpage=(TUint8*)_ALIGN_DOWN((TLinAddr)aChunk.Base(), PageSize);
for (TInt i=0; i < Repitions; i++)
{
TInt r = pagemove.TryMovingUserPage(firstpage, ETrue);
// Allow all valid return codes as we are only testing that this doesn't
// crash the kernel and the page could be commited, paged out or decommited
// at any one time.
test_Value(r, r <= KErrNone);
}
thread.Kill(KErrNone);
User::WaitForRequest(s);
test_Equal(EExitKill,thread.ExitType());
test_KErrNone(thread.ExitReason());
thread.Close();
}
enum TVerdict CTestMemRelinquish::doTestStepL()
{
INFO_PRINTF1(_L("Test Call Relinquish Case 2"));
User::SetJustInTime(EFalse); // switches off the WINS threadbreakpoints
RThread t;
TInt res=t.Create(_L("RelinquishCall"),RelinquishCall,KDefaultStackSize,KDefaultHeapSize,KDefaultHeapSize,NULL);
TESTCHECK(res, KErrNone);
TRequestStatus stat = KRequestPending;
t.Logon(stat);
t.Resume();
User::WaitForRequest(stat);
TESTCHECK(t.ExitType(), EExitKill);
//TESTCHECK(t.ExitCategory()==_L("Etel Client Faul"));
//TESTCHECK(t.ExitReason()==11); // EEtelPanicHandleNotClosed is 11
//TESTCHECK(t.ExitType()==EExitPanic);
t.Close();
User::SetJustInTime(ETrue);
User::After(KETelThreadShutdownGuardPeriod);
return TestStepResult();
}
/**
@SYMTestCaseID SYSLIB-ECOM-CT-3163
@SYMTestCaseDesc Verify the startup behaviour of the ECOM server under OOM conditions
@SYMTestPriority High
@SYMTestActions Generate an OOM condition.
Create a new thread which will launch the ECOM server.
Wait for the thread to exit and check the thread exit type
and reason to verify behaviour.
@SYMTestExpectedResults The test must not fail.
@SYMDEF DEF094675
*/
void StartServer_OOMTest()
{
_LIT(KStartThreadName,"Server Start Thread");
//Create a new thread to launch the ECOM server
RThread testThread;
testThread.Create(KStartThreadName, ServerStartThreadEntryL,
KDefaultStackSize,KMinHeapSize,KMinHeapSize,NULL);
TRequestStatus status;
testThread.Logon(status);
testThread.Resume();
//Wait for the thread to exit
User::WaitForRequest(status);
//Obtain exit type and reason for test thread
TExitType exitType = testThread.ExitType();
TInt exitReason = testThread.ExitReason();
//close the thread handle
testThread.Close();
//Verify the exit reason and exit code
//Exit type is TExitType::EExitKill when E32Main() exit normally
TEST(exitType == EExitKill);
TEST(exitReason == KErrNoMemory);
}
TInt ChildThread(TAny* aArg)
{
TInt testType = (TInt)aArg;
RThread mainThread;
TInt r = mainThread.Open(MainThreadId);
if (r != KErrNone)
return r;
// Open handle on dynamic DLL in this thread
RLibrary library;
test_KErrNone(library.Load(KDynamicDll));
RThread().Rendezvous(KErrNone);
TRequestStatus status;
mainThread.Logon(status);
User::WaitForRequest(status);
if (mainThread.ExitType() != EExitKill)
return KErrGeneral;
if (mainThread.ExitReason() != KErrNone)
return mainThread.ExitReason();
mainThread.Close();
if (testType != ETestRecursive)
{
RMsgQueue<TMessage> messageQueue;
r = messageQueue.OpenGlobal(KMessageQueueName);
if (r != KErrNone)
return r;
r = messageQueue.Send(EMessagePreDestruct);
if (r != KErrNone)
return r;
}
return testType;
}
TInt CTSISHelperStepBase::startSisHelper(Swi::TSisHelperStartParams& aParams)
{
// To deal with the unique thread (+semaphore!) naming in Symbian OS, and
// that we may be trying to restart a server that has just exited we
// attempt to create a unique thread name for the server
TName name(Swi::KSisHelperServerName);
name.AppendNum(Math::Random(), EHex);
RThread server;
const TInt KSisHelperServerStackSize=0x2000;
const TInt KSisHelperServerInitHeapSize=0x1000;
const TInt KSisHelperServerMaxHeapSize=0x1000000;
TInt err=server.Create(name, sisHelperThreadFunction,
KSisHelperServerStackSize, KSisHelperServerInitHeapSize,
KSisHelperServerMaxHeapSize, static_cast<TAny*>(&aParams),
EOwnerProcess);
if (err!=KErrNone)
return err;
// The following code is the same whether the server runs in a new thread
// or process
TRequestStatus stat;
server.Rendezvous(stat);
if (stat!=KRequestPending)
server.Kill(0); // abort startup
else
server.Resume(); // logon OK, start the server
User::WaitForRequest(stat); // wait for start or death
// we can't use the 'exit reason' if the server panicked as this is the
// panic 'reason' and may be 0 which cannot be distinguished from KErrNone
err=(server.ExitType()==EExitPanic) ? KErrGeneral : stat.Int();
server.Close();
return err;
}
/*
* Creates a Thread that modifies its code in a tight loop while the main
* thread moves the functions page around
*/
LOCAL_C TInt TestCodeModificationAsync(RPageMove& pagemove)
{
TInt ret;
RThread CodeThread;
TRequestStatus s;
/* Create the Thread to modify the code segment */
test_KErrNone(CodeThread.Create(_L("TestCodeAsync"), TestCodeAsync, KDefaultStackSize, NULL, NULL));
CodeThread.Logon(s);
CodeThread.SetPriority(EPriorityMore);
CodeThread.Resume();
TestCodeSetupDrive(CodeThread);
/* Loop trying to move the code page while the thread (CodeThread) modifies it */
for (TInt i=0; i<Repitions; i++)
{
test_KErrNone(pagemove.TryMovingUserPage((TAny*)TestCodeModFunc));
}
CodeThread.Kill(KErrNone);
User::WaitForRequest(s);
test_Equal(EExitKill, CodeThread.ExitType());
test_KErrNone(CodeThread.ExitReason());
CodeThread.Close();
ret = TestCodeModFunc();
test(ret == 1 || ret == 2);
return KErrNone;
}
/**
Intended Usage : Capture the PANIC that occurs in the thread.
@param : aName The name to be assigned to this thread.
@param : aFunction The function which causes the panic.
*/
LOCAL_C void ThreadPanicTest(const TDesC& aName,TThreadFunction aFunction)
{
TheTest.Next(aName);
TRequestStatus threadStatus;
RThread thread;
TBool jit;
jit=User::JustInTime();
User::SetJustInTime(EFalse);
for (TInt i = EIterFunctionDriveUnit; i <= EIterFunctionIsRemovable; i++)
{
TIteratorFunctionToTest func = static_cast<TIteratorFunctionToTest>(i);
TInt err=thread.Create(aName,aFunction,KDefaultStackSize,KMinHeapSize,KMinHeapSize, &func);
TESTL(err==KErrNone);
thread.Logon(threadStatus);
thread.Resume();
User::WaitForRequest(threadStatus);
//Now check why the thread Exit
TExitType exitType = thread.ExitType();
TInt exitReason = thread.ExitReason();
TheTest.Printf(_L("PanicTest: exitType %d, reason %d\n"), exitType, exitReason);
TESTL(exitType == EExitPanic);
TESTL(exitReason == KPanicIndexOutOfBound);
thread.Close();
}
User::SetJustInTime(jit);
}
LOCAL_D void TestSelfSuspend(TOwnerType anOwnerType)
//
// Test running a thread that suspends itself. This activity has
// deadlocked the Emulator in the past
//
{
RThread suspendThread;
TInt r;
TRequestStatus s;
TInt jit=User::JustInTime();
test.Start(_L("Test running a thread which suspends itself"));
test.Next(_L("Create the thread"));
r=suspendThread.Create(KNullDesC,SuspendThread,KDefaultStackSize,KHeapSize,KHeapSize,(TAny*)NULL,anOwnerType);
test(r==KErrNone);
suspendThread.Logon(s);
suspendThread.Resume();
test.Next(_L("Wait a second"));
User::After(1000000);
User::SetJustInTime(EFalse);
suspendThread.Panic(_L("FEDCBA9876543210fedcba"),999);
User::WaitForRequest(s);
User::SetJustInTime(jit);
test(suspendThread.ExitType()==EExitPanic);
test(suspendThread.ExitReason()==999);
test(suspendThread.ExitCategory()==_L("FEDCBA9876543210"));
CLOSE_AND_WAIT(suspendThread);
test.End();
}
GLDEF_C TInt E32Main()
{
test.Title();
test.Start(_L("Waiting..."));
RUndertaker u;
TInt r=u.Create();
test(r==KErrNone);
//to avoid RVCT4 warning of unreachable statement.
volatile TInt forever = 0;
while(forever)
{
TInt h;
TRequestStatus s;
r=u.Logon(s,h);
test(r==KErrNone);
User::WaitForRequest(s);
RThread t;
t.SetHandle(h);
TBuf8<128> b;
t.Context(b);
TInt *pR=(TInt*)b.Ptr();
TFullName tFullName = t.FullName();
TExitCategoryName tExitCategory = t.ExitCategory();
test.Printf(_L("Thread %S Exit %d %S %d\n"),&tFullName,t.ExitType(),&tExitCategory,t.ExitReason());
test.Printf(_L("r0 =%08x r1 =%08x r2 =%08x r3 =%08x\n"),pR[0],pR[1],pR[2],pR[3]);
test.Printf(_L("r4 =%08x r5 =%08x r6 =%08x r7 =%08x\n"),pR[4],pR[5],pR[6],pR[7]);
test.Printf(_L("r8 =%08x r9 =%08x r10=%08x r11=%08x\n"),pR[8],pR[9],pR[10],pR[11]);
test.Printf(_L("r12=%08x r13=%08x r14=%08x r15=%08x\n"),pR[12],pR[13],pR[14],pR[15]);
test.Printf(_L("cps=%08x dac=%08x\n"),pR[16],pR[17]);
t.Close();
}
return 0;
}
void TestServerApi(TInt aFunctionNumber,
TInt aTestType,TInt aArgCount, TExitDetails& aExitDetails)
{
TTestInfo testInfo;
testInfo.iFunction = aFunctionNumber;
testInfo.iType = aTestType;
testInfo.iArgCount = aArgCount;
RThread thread;
_LIT(KThreadName,"FuzzerThread" );
TInt err = thread.Create(KThreadName,&FuzzServerL, KDefaultStackSize, NULL,&testInfo);
TEST2(err, KErrNone);
TRequestStatus threadStat;
thread.Logon(threadStat);
TBool jit = User::JustInTime();
User::SetJustInTime(EFalse);
thread.Resume();
User::WaitForRequest(threadStat);
User::SetJustInTime(jit);
aExitDetails.iCategory = thread.ExitCategory();
aExitDetails.iReason = thread.ExitReason();
aExitDetails.iExitType = thread.ExitType();
thread.Close();
}
void DoTestThreadCpuTime3(TAny* aParam, TExitType aExpectedExitType, TInt aExpectedExitReason)
{
RThread thread;
FailIfError(thread.Create(_L("TestThread"), ThreadFunction2, 1024, NULL, aParam));
thread.Resume();
TRequestStatus status;
thread.Logon(status);
User::WaitForRequest(status);
TExitCategoryName exitCat = thread.ExitCategory();
test.Printf(_L("Thread exit with type == %d, reason == %d, cat == %S\n"),
thread.ExitType(), thread.ExitReason(), &exitCat);
test(thread.ExitType() == aExpectedExitType);
test(thread.ExitReason() == aExpectedExitReason);
CLOSE_AND_WAIT(thread);
}
void CheckExit(TInt aThreadNum, RThread aThread)
{
TInt exitType=aThread.ExitType();
TInt exitReason=aThread.ExitReason();
TBuf<32> exitCat=aThread.ExitCategory();
test.Printf(_L("Thread %d: %d,%d,%S\n"),aThreadNum,exitType,exitReason,&exitCat);
test(exitType==EExitKill);
test(exitReason==KErrNone);
}
static TInt StartServer()
//
// Start the server process or thread
//
{
const TUidType serverUid(KNullUid,KNullUid,KServerUid3);
#ifdef __CDLSERVER_NO_PROCESSES__
//
// In EKA1 WINS the server is a DLL, the exported entrypoint returns a TInt
// which represents the real entry-point for the server thread
//
RLibrary lib;
TInt r=lib.Load(KCdlServerDllImg,serverUid);
if (r!=KErrNone)
return r;
TLibraryFunction ordinal1=lib.Lookup(1);
TThreadFunction serverFunc=reinterpret_cast<TThreadFunction>(ordinal1());
//
// To deal with the unique thread (+semaphore!) naming in EPOC, and that we may
// be trying to restart a server that has just exited we attempt to create a
// unique thread name for the server.
// This uses Math::Random() to generate a 32-bit random number for the name
//
TName name(KCdlServerName);
name.AppendNum(Math::Random(),EHex);
RThread server;
r=server.Create(name,serverFunc,
KCdlServerStackSize,
NULL,&lib,NULL,
KCdlServerInitHeapSize,KCdlServerMaxHeapSize,EOwnerProcess);
lib.Close(); // if successful, server thread has handle to library now
#else
//
// EPOC and EKA2 is easy, we just create a new server process. Simultaneous launching
// of two such processes should be detected when the second one attempts to
// create the server object, failing with KErrAlreadyExists.
//
RProcess server;
TInt r=server.Create(KCdlServerExeImg,KNullDesC,serverUid);
#endif
if (r!=KErrNone)
return r;
TRequestStatus stat;
server.Rendezvous(stat);
if (stat!=KRequestPending)
server.Kill(0); // abort startup
else
server.Resume(); // logon OK - start the server
User::WaitForRequest(stat); // wait for start or death
// we can't use the 'exit reason' if the server panicked as this
// is the panic 'reason' and may be '0' which cannot be distinguished
// from KErrNone
r=(server.ExitType()==EExitPanic) ? KErrGeneral : stat.Int();
server.Close();
return r;
}
LOCAL_C void RunTestThreadL()
{
__UHEAP_MARK;
CopyPluginsL();
_LIT(KThreadName, "RoguePluginTest");
TBool jit = User::JustInTime();
User::SetJustInTime(EFalse);
TheTest.Start(KTestTitle);
// Save the console because the created thread must use its own
// console.
CConsoleBase* savedConsole = TheTest.Console();
RThread tt;
TInt err = tt.Create(KThreadName, &ThreadFunc, KDefaultStackSize,
KMinHeapSize, 0x100000, 0);
User::LeaveIfError(err);
TRequestStatus status;
tt.Logon(status);
tt.Resume();
User::WaitForRequest(status);
// restore console
TheTest.SetConsole(savedConsole);
TExitCategoryName exitcategory = tt.ExitCategory();
TExitType exittype = tt.ExitType();
TInt exitReason = tt.ExitReason();
tt.Close();
TheTest.Printf(_L("Thread exit type %d, reason %d, category %S"), exittype, exitReason, &exitcategory);
User::SetJustInTime(jit);
DeleteTestPlugin();
// Check if tt thread passes this checkpoint
TheTest(correctTypeCastPassed);
// Check if tt thread die of KERN-EXEC.
_LIT(KKernExec, "KERN-EXEC");
TheTest(exitcategory.CompareF(KKernExec) == 0);
TheTest.End();
TheTest.Close();
__UHEAP_MARKEND;
}
TInt ThreadFunc(TAny* anArgument)
{
CSharedData* mySharedData = reinterpret_cast<CSharedData*> (anArgument);
RUndertaker u;
u.Create();
TRequestStatus status;
TInt deadThread;
TBool clientWaiting = ETrue;
FOREVER
{
status = KRequestPending;
u.Logon(status,deadThread);
// wait for the next thread to die.
if (clientWaiting)
{
// rendezvous with the client so that they know we're ready.
// This guarantees that we will catch at least the first panic to
// occur (as long as we aren't closed before kernel tells us.
RThread::Rendezvous(KErrNone);
clientWaiting = EFalse;
}
User::WaitForRequest(status);
// until we get back around to the top we are missing notifications now.
// being high priority helps us, but still...
// deal with this QUICKLY
// get handle to the dead thread (this has already been marked for us in
// the kernel)
RThread t;
t.SetHandle(deadThread);
if (t.ExitType() == EExitPanic)
{
// the other ways threads can die are uninteresting
TTime now;
now.UniversalTime();
TThreadPanicDetails* tpd = new TThreadPanicDetails (t.Name(),
t.ExitReason(),t.ExitCategory(),now);
mySharedData->iPanicDetails.AppendL(tpd);
}
t.Close();
}
}
void RunTestInThread(TThreadFunction aFn, TAny* aParameter, const TDesC* aPanicCat, TInt aExitCode)
{
RThread t;
TInt r=t.Create(KNullDesC(),aFn,0x2000,NULL,aParameter);
test(r==KErrNone);
TRequestStatus s;
t.Logon(s);
t.Resume();
User::WaitForRequest(s);
if (aPanicCat)
{
test(t.ExitType()==EExitPanic);
test(t.ExitCategory()==*aPanicCat);
test(t.ExitReason()==aExitCode);
}
else
{
test(t.ExitType()==EExitKill);
test(t.ExitReason()==aExitCode);
}
CLOSE_AND_WAIT(t);
}
void CSystemTestBase::HandleThreadExitL(RThread& aThread)
{
TExitType exitType=aThread.ExitType();
if (exitType==EExitPanic)
{
CActiveScheduler::Stop();
iExitReason = aThread.ExitReason();
iExitCategory = aThread.ExitCategory();
TBuf<100> iName(aThread.FullName());
iLogger.WriteFormat(KPanicText, &iName, iExitReason, &iExitCategory);
User::Panic(iExitCategory,iExitReason);
}
}
void SDL_SYS_WaitThread(SDL_Thread *thread)
{
SDL_TRACE1("Close thread", thread);
RThread t;
const TInt err = t.Open(thread->threadid);
if(err == KErrNone && t.ExitType() == EExitPending)
{
TRequestStatus status;
t.Logon(status);
User::WaitForRequest(status);
}
t.Close();
SDL_TRACE1("Closed thread", thread);
}
/**
@SYMTestCaseID APPFWK-APPARC-0071
@SYMDEF PDEF100072 -- CApaWindowGroupName::SetAppUid() and FindByAppUid panic
@SYMTestCaseDesc Test Launching of an application with unprotected application UID
@SYMTestPriority High
@SYMTestStatus Implemented
@SYMTestActions Prepare command line information to start an application using
CApaCommandLine Apis.Call RApaLsSession::StartApp() to start an
application defined by the command line information.\n
Test the launching of application for following scenario:\n
When Application specified by command line has unprotected application UID(negative uid).\n
API Calls:\n
RApaLsSession::StartApp(const CApaCommandLine &aCommandLine, TThreadId &aThreadId);\n
@SYMTestExpectedResults The test checks whether the thread has terminated with the exit reason KTUnProtectedAppTestPassed
*/
void CT_StartAppTestStep::TestStartApp8L()
{
INFO_PRINTF1(_L("Checking launching of an application which has unprotected UID"));
CApaCommandLine* cmdLine=CApaCommandLine::NewLC();
TFileName filename;
_LIT(KAppFileName, "z:\\sys\\bin\\UnProctectedUidApp.exe");
TFullName exePath(KAppFileName);
filename = SearchAndReturnCompleteFileName(exePath);
cmdLine->SetExecutableNameL(filename);
TThreadId appThreadId(0U);
TInt ret = iApaLsSession.StartApp(*cmdLine, appThreadId);
TEST(ret == KErrNone);
User::LeaveIfError(ret);
CleanupStack::PopAndDestroy(cmdLine); // cmdLine
RThread appThread;
User::LeaveIfError(appThread.Open(appThreadId));
TRequestStatus logonRequestStatus;
appThread.Logon(logonRequestStatus);
// wait for UnProctectedUidApp.exe to terminate
INFO_PRINTF1(_L("Waiting for application to terminate..."));
User::WaitForRequest(logonRequestStatus);
const TExitType exitType = appThread.ExitType();
const TInt exitReason = appThread.ExitReason();
TExitCategoryName categoryName = appThread.ExitCategory();
appThread.Close();
TBuf<50> msg;
if (exitType == EExitPanic)
{
_LIT(KAppPanicInfo, "Application panic: %S %d");
msg.Format(KAppPanicInfo, &categoryName, exitReason);
}
else
{
_LIT(KAppExitInfo, "Application exited with code %d");
msg.Format(KAppExitInfo, exitReason);
}
INFO_PRINTF1(msg);
TEST(logonRequestStatus == KTUnProtectedAppTestPassed);
TEST(exitType == EExitKill);
TEST(exitReason == KTUnProtectedAppTestPassed);
INFO_PRINTF1(KCompleted);
}
/**
* Creates a second thread to run the test.
*
* @param aFunctionIndex The drawing function command to be executed. All commands are defined in TestFunctionIndex.
*/
void CTW32CmdBuf::CreateSecondThreadAndDoTestL(TTestFunctionIndex aFunctionIndex)
{
RThread thread;
TBuf<30> threadName(KTW32CmdBufSecondThread);
static TInt threadSerialNumber = 0;
threadName.AppendNum(++threadSerialNumber);
User::LeaveIfError(thread.Create(threadName, TestCmdBufFunction, KDefaultStackSize, KMinHeapSize, 0x4000, &aFunctionIndex));
TRequestStatus status;
thread.Logon(status);
thread.Resume();
User::WaitForRequest(status);
TEST(thread.ExitType()==EExitKill);
TEST(thread.ExitReason() == KErrNone);
thread.Close();
}
void CCmdKill::DoKillThreadL(TUint aId)
{
#ifdef FSHELL_MEMORY_ACCESS_SUPPORT
LoadMemoryAccessL();
RThread thread;
LeaveIfErr(iMemAccess.RThreadForceOpen(thread, aId), _L("Unable to open thread"));
TName name(thread.FullName());
if (thread.ExitType() != EExitPending)
{
Printf(_L("%S (id=%u) has already exited"), &name, aId);
thread.Close();
return;
}
CleanupClosePushL(thread);
TExitType type = EExitKill;
if (iTerminate)
{
type = EExitTerminate;
}
else if (iPanicCategory)
{
type = EExitPanic;
}
TInt err = iMemAccess.ObjectDie(EThread, aId, NULL, type, iReason, iPanicCategory ? *iPanicCategory : KNullDesC());
LeaveIfErr(err, _L("Couldn't kill thread id %u"), aId);
if (iTerminate)
{
Printf(_L("Terminated %S (id=%u) with %d\r\n"), &name, aId, iReason);
}
else if (iPanicCategory)
{
Printf(_L("Panicked %S (id=%u) with %S %d\r\n"), &name, aId, iPanicCategory, iReason);
}
else
{
Printf(_L("Killed %S (id=%u) with %d\r\n"), &name, aId, iReason);
}
CleanupStack::PopAndDestroy(&thread);
#else
DoKillByHandleL<RThread>(aId);
#endif
}
//DEF057265 - Panics when uninstalling a java midlet while it is running.
//The test will run one thread. Inside the thread's function the test will create
//DBMS session and reserve some disk space. Then the test will panic the thread
//(without freeing the reserved disk space).
//If DBMS server panics in _DEBUG mode - the defect is not fixed.
void DEF057265()
{
_LIT(KSessThreadName,"SessThrd");
RThread sessThread;
TEST2(sessThread.Create(KSessThreadName, &ThreadFunc, 0x2000, 0, 0), KErrNone);
TRequestStatus sessThreadStatus;
sessThread.Logon(sessThreadStatus);
TEST2(sessThreadStatus.Int(), KRequestPending);
sessThread.Resume();
User::WaitForRequest(sessThreadStatus);
TEST2(sessThread.ExitType(), EExitPanic);
User::SetJustInTime(EFalse); // disable debugger panic handling
sessThread.Close();//This Close() operation will force DBMS server to close
//created in ThreadFunc() DBMS session.
}