void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieChoice(_("Noise type") + wxString(wxT(":")), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EchoDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: && in here is an escape character to get a single & on
* screen, so keep it as is */
S.AddTitle(_("by Dominic Mazzoni && Vaughan Johnson"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
m_pTextCtrl_Delay = S.AddTextBox(_("Delay time (seconds):"),
wxT("1.0"),
10);
m_pTextCtrl_Delay->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
m_pTextCtrl_Decay = S.AddTextBox(_("Decay factor:"),
wxT("0.5"),
10);
m_pTextCtrl_Decay->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Noise type"), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.AddPrompt(_("Duration"));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
wxT("/GUI/ErgonomicTransportButtons"),
true);
S.TieCheckBox(_("S&how 'How to Get Help' dialog box at program start up"),
wxT("/GUI/ShowSplashScreen"),
true);
S.AddSpace(10);
S.StartMultiColumn(2);
{
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label edge"),
wxT("/GUI/RetainLabels"),
false);
#ifdef EXPERIMENTAL_OUTPUT_DISPLAY
S.TieCheckBox(_("&Display a mono channel as virtual stereo"),
wxT("/GUI/MonoAsVirtualStereo"),
false);
#endif
}
S.EndStatic();
}
void FindClippingDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Leland Lucius"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieTextBox(_("Start threshold (samples):"),
mEffect->mStart,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
S.TieTextBox(_("Stop threshold (samples):"),
mEffect->mStop,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Noise duration"), false);
mNoiseDurationT = new
TimeTextCtrl(this,
ID_NOISE_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (nDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mNoiseDurationT);
mNoiseDurationT->EnableMenu();
S.TieTextBox( _("Amplitude"), nAmplitude, 10);
S.TieChoice( _("Noise type:"), nType, nTypeList);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
S.StartMultiColumn(2, wxCENTER);
{
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->EnableMenu();
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(wxT(""));
{
S.AddFixedText(_("These are experimental modules. Enable them only if you've read the Audacity Manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the module each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the module is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' means no choice has been made yet.") );
S.AddFixedText(_("Changes to these settings only take effect when Audacity starts up."));
S.StartScroller();
{
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
}
if( mModules.GetCount() < 1 )
{
S.AddFixedText( _("No modules were found") );
}
S.EndScroller();
}
S.EndStatic();
}
void WahwahDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxCENTER);
{
wxSlider *s;
wxTextCtrl * tempTC;
tempTC = S.Id(ID_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
s->SetName(_("LFO start phase in degrees"));
s->SetLineSize(10);
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_DEPTHTEXT).AddTextBox(_("Depth (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_RESONANCETEXT).AddTextBox(_("Resonance:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_RESONANCESLIDER).AddSlider(wxT(""), 0, RES_MAX, RES_MIN);
s->SetName(_("Resonance"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_FREQOFFTEXT).AddTextBox(_("Wah Frequency Offset (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s =S.Id(ID_FREQOFFSLIDER).AddSlider(wxT(""), 0, FREQOFF_MAX, FREQOFF_MIN);
s->SetName(_("Wah frequency offset in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
}
void SetTrackStatusCommand::PopulateOrExchange(ShuttleGui & S)
{
SetTrackBase::PopulateOrExchange( S );
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasTrackName ).TieTextBox( _("Name:"), mTrackName );
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol( 1 );
S.Optional( bHasSelected ).TieCheckBox( _("Selected"), bSelected );
S.Optional( bHasFocused ).TieCheckBox( _("Focused"), bFocused);
}
S.EndMultiColumn();
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle(_("Start"));
S.AddTitle(_("End"));
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 10)->SetName(_("Frequency Hertz Start"));
S.TieNumericTextBox(wxT(""), frequency[1], 10)->SetName(_("Frequency Hertz End"));
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 10)->SetName(_("Amplitude Start"));
S.TieNumericTextBox(wxT(""), amplitude[1], 10)->SetName(_("Amplitude End"));
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Interpolation:"), interpolation, interpolations);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void ClickRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(10, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Click and Pop Removal by Craig DeForest"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
// Threshold
mThreshT = S.Id(ID_THRESH_TEXT).AddTextBox(_("Select threshold (lower is more sensitive):"),
wxT(""),
10);
mThreshT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mThreshS = S.Id(ID_THRESH_SLIDER).AddSlider(wxT(""),
0,
MAX_THRESHOLD);
mThreshS->SetName(_("Select threshold"));
mThreshS->SetRange(MIN_THRESHOLD, MAX_THRESHOLD);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mThreshS->SetMinSize(wxSize(100, -1));
#endif
// Click width
mWidthT = S.Id(ID_WIDTH_TEXT).AddTextBox(_("Max spike width (higher is more sensitive):"),
wxT(""),
10);
mWidthT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mWidthS = S.Id(ID_WIDTH_SLIDER).AddSlider(wxT(""),
0,
MAX_CLICK_WIDTH);
mWidthS->SetName(_("Max spike width"));
mWidthS->SetRange(MIN_CLICK_WIDTH, MAX_CLICK_WIDTH);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mWidthS->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
return;
}
void SetTrackAudioCommand::PopulateOrExchange(ShuttleGui & S)
{
SetTrackBase::PopulateOrExchange( S );
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol( 1 );
S.Optional( bHasMute ).TieCheckBox( _("Mute"), bMute);
S.Optional( bHasSolo ).TieCheckBox( _("Solo"), bSolo);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasGain ).TieSlider( _("Gain:"), mGain, 36.0,-36.0);
S.Optional( bHasPan ).TieSlider( _("Pan:"), mPan, 100.0, -100.0);
}
S.EndMultiColumn();
}
void SelectTracksCommand::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasFirstTrack).TieTextBox(_("First Track:"),mFirstTrack);
S.Optional( bHasNumTracks).TieTextBox(_("Track Count:"),mNumTracks);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
// Always used, so no check box.
S.TieChoice( _("Mode:"), mMode, LocalizedStrings( kModes, nModes ));
}
S.EndMultiColumn();
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable( false ); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
}
S.EndMultiColumn();
S.StartStatic(_("C&hoose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
for(int i=0;i<99;i++)
{
mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
}
PopulateCommandList();
SetSize(350, 400);
SetSizeHints(GetSize());
Center();
}
void GetTrackInfoCommand::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString types( nTypes, kTypes );
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieChoice( _("Types:"), mInfoType, &types);
}
S.EndMultiColumn();
}
void TracksBehaviorsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("A&uto-select, if selection required"),
wxT("/GUI/SelectAllOnNone"),
false);
/* i18n-hint: Cut-lines are lines that can expand to show the cut audio.*/
S.TieCheckBox(_("Enable cut &lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("&Type to create a label"),
wxT("/GUI/TypeToCreateLabel"),
true);
S.TieCheckBox(_("Use dialog for the &name of a new label"),
wxT("/GUI/DialogForNameNewLabel"),
false);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
ScrollingPreferenceKey(),
ScrollingPreferenceDefault());
#endif
S.TieCheckBox(_("Advanced &vertical zooming"),
wxT("/GUI/VerticalZooming"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
}
S.EndMultiColumn();
}
S.EndStatic();
S.EndScroller();
}
/// Create the dialog contents, or exchange data with it.
void SmartRecordPrefs::PopulateOrExchange( ShuttleGui & S)
{
S.StartStatic( _("Pause Recording on Silence") );
{
S.TieCheckBox( _("Pause Recording on Silence"), wxT("/AudioIO/PauseRecOnSilence"),false);
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieSlider(_("Silence level (dB):"), wxT("/AudioIO/SilenceLevel"), -50, 0, -60);
S.EndMultiColumn();
}
S.EndStatic();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
S.TieTextBox( _("Frequency / Hz"),frequency[0], 5);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 5);
S.TieTextBox( _("Length (seconds)"),length, 5 );
}
S.EndMultiColumn();
}
void SelectFrequenciesCommand::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasTop ).TieTextBox(_("High:"), mTop);
S.Optional( bHasBottom ).TieTextBox(_("Low:"), mBottom);
}
S.EndMultiColumn();
}
void SetClipCommand::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxALIGN_CENTER);
{
S.Optional( bHasContainsTime).TieNumericTextBox( _("At:"), mContainsTime );
S.Optional( bHasColour ).TieChoice( _("Colour:"), mColour,
LocalizedStrings( kColourStrings, nColours ) );
S.Optional( bHasT0 ).TieNumericTextBox( _("Start:"), mT0 );
}
S.EndMultiColumn();
}
void FindClippingDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieTextBox(_("Start threshold (samples):"),
mEffect->mStart,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
S.TieTextBox(_("Stop threshold (samples):"),
mEffect->mStop,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
void BassBoostDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(10, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Nasca Octavian Paul"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
// Frequency
mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency (Hz):"),
wxT(""),
10);
mFreqT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""),
0,
FREQ_MAX);
mFreqS->SetName(_("Frequency Hertz"));
mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
// Boost
mBoostT = S.Id(ID_BOOST_TEXT).AddTextBox(_("Boost (dB):"),
wxT(""),
10);
mBoostT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mBoostS = S.Id(ID_BOOST_SLIDER).AddSlider(wxT(""),
0,
BOOST_MAX);
mBoostS->SetName(_("Boost dB"));
mBoostS->SetRange(BOOST_MIN, BOOST_MAX);
}
S.EndMultiColumn();
return;
}
void EffectEcho::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxALIGN_CENTER);
{
FloatingPointValidator<double> vldDelay(3, &delay, NUM_VAL_NO_TRAILING_ZEROES);
vldDelay.SetRange(MIN_Delay, MAX_Delay);
S.AddTextBox(_("Delay time (seconds):"), wxT(""), 10)->SetValidator(vldDelay);
FloatingPointValidator<double> vldDecay(3, &decay, NUM_VAL_NO_TRAILING_ZEROES);
vldDecay.SetRange(MIN_Decay, MAX_Decay);
S.AddTextBox(_("Decay factor:"), wxT(""), 10)->SetValidator(vldDecay);
}
S.EndMultiColumn();
}
void SoundActivatedRecord::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
int dBRange;
S.StartVerticalLay();
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
dBRange = gPrefs->Read(ENV_DB_KEY, ENV_DB_RANGE);
S.TieSlider(_("Activation level (dB):"), wxT("/AudioIO/SilenceLevel"), -50, 0, -dBRange);
S.EndMultiColumn();
}
S.EndVerticalLay();
S.AddStandardButtons();
}
void SelectTimeCommand::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasT0 ).TieTextBox(_("Start Time:"), mT0);
S.Optional( bHasT1 ).TieTextBox(_("End Time:"), mT1);
// Chooses what time is relative to.
S.Optional( bHasRelativeSpec ).TieChoice(
_("Relative To:"),
mRelativeTo, LocalizedStrings( kRelativeTo, nRelativeTos ));
}
S.EndMultiColumn();
}
void SetTrackBase::PopulateOrExchange(ShuttleGui & S)
{
static_cast<void>(S);
#ifdef USE_OWN_TRACK_SELECTION
if( !mbPromptForTracks )
return;
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasTrackIndex ).TieNumericTextBox( _("Track Index:"), mTrackIndex );
S.Optional( bHasChannelIndex).TieNumericTextBox( _("Channel Index:"), mChannelIndex );
}
S.EndMultiColumn();
#endif
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void ExportMP2Options::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxCENTER);
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Bit Rate:"), wxT("/FileFormats/MP2Bitrate"),
160, mBitRateNames, mBitRateLabels);
}
S.EndMultiColumn();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
}
void PaulstretchDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartMultiColumn(2, wxALIGN_CENTER);
{
/* i18n-hint: This is how many times longer the sound will be, e.g. applying
* the effect to a 1-second sample, with the default Stretch Factor of 10.0
* will give an (approximately) 10 second sound
*/
m_pTextCtrl_Amount = S.AddTextBox(_("Stretch Factor:"),wxT("10.0"),10);
m_pTextCtrl_Amount->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
m_pTextCtrl_TimeResolution= S.AddTextBox(_("Time Resolution (seconds):"), wxT("0.25"),10);
m_pTextCtrl_TimeResolution->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
};
