void BackgroundSync::_produce(OperationContext* txn) {
// this oplog reader does not do a handshake because we don't want the server it's syncing
// from to track how far it has synced
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
if (_lastOpTimeFetched.isNull()) {
// then we're initial syncing and we're still waiting for this to be set
lock.unlock();
sleepsecs(1);
// if there is no one to sync from
return;
}
if (_replCoord->isWaitingForApplierToDrain() || _replCoord->getMemberState().primary() ||
inShutdownStrict()) {
return;
}
}
while (MONGO_FAIL_POINT(rsBgSyncProduce)) {
sleepmillis(0);
}
// find a target to sync from the last optime fetched
OpTime lastOpTimeFetched;
HostAndPort source;
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
lastOpTimeFetched = _lastOpTimeFetched;
_syncSourceHost = HostAndPort();
}
SyncSourceResolverResponse syncSourceResp =
_syncSourceResolver.findSyncSource(txn, lastOpTimeFetched);
if (syncSourceResp.syncSourceStatus == ErrorCodes::OplogStartMissing) {
// All (accessible) sync sources were too stale.
error() << "too stale to catch up -- entering maintenance mode";
log() << "Our newest OpTime : " << lastOpTimeFetched;
log() << "Earliest OpTime available is " << syncSourceResp.earliestOpTimeSeen;
log() << "See http://dochub.mongodb.org/core/resyncingaverystalereplicasetmember";
setMinValid(txn, {lastOpTimeFetched, syncSourceResp.earliestOpTimeSeen});
auto status = _replCoord->setMaintenanceMode(true);
if (!status.isOK()) {
warning() << "Failed to transition into maintenance mode.";
}
bool worked = _replCoord->setFollowerMode(MemberState::RS_RECOVERING);
if (!worked) {
warning() << "Failed to transition into " << MemberState(MemberState::RS_RECOVERING)
<< ". Current state: " << _replCoord->getMemberState();
}
return;
} else if (syncSourceResp.isOK() && !syncSourceResp.getSyncSource().empty()) {
stdx::lock_guard<stdx::mutex> lock(_mutex);
_syncSourceHost = syncSourceResp.getSyncSource();
source = _syncSourceHost;
} else {
if (!syncSourceResp.isOK()) {
log() << "failed to find sync source, received error "
<< syncSourceResp.syncSourceStatus.getStatus();
}
// No sync source found.
sleepsecs(1);
return;
}
long long lastHashFetched;
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
if (_stopped) {
return;
}
lastOpTimeFetched = _lastOpTimeFetched;
lastHashFetched = _lastFetchedHash;
_replCoord->signalUpstreamUpdater();
}
const auto isV1ElectionProtocol = _replCoord->isV1ElectionProtocol();
// Under protocol version 1, make the awaitData timeout (maxTimeMS) dependent on the election
// timeout. This enables the sync source to communicate liveness of the primary to secondaries.
// Under protocol version 0, use a default timeout of 2 seconds for awaitData.
const Milliseconds fetcherMaxTimeMS(
isV1ElectionProtocol ? _replCoord->getConfig().getElectionTimeoutPeriod() / 2 : Seconds(2));
Status fetcherReturnStatus = Status::OK();
auto fetcherCallback = stdx::bind(&BackgroundSync::_fetcherCallback,
this,
stdx::placeholders::_1,
stdx::placeholders::_3,
stdx::cref(source),
lastOpTimeFetched,
lastHashFetched,
fetcherMaxTimeMS,
&fetcherReturnStatus);
BSONObjBuilder cmdBob;
cmdBob.append("find", nsToCollectionSubstring(rsOplogName));
cmdBob.append("filter", BSON("ts" << BSON("$gte" << lastOpTimeFetched.getTimestamp())));
cmdBob.append("tailable", true);
cmdBob.append("oplogReplay", true);
cmdBob.append("awaitData", true);
cmdBob.append("maxTimeMS", durationCount<Milliseconds>(Minutes(1))); // 1 min initial find.
BSONObjBuilder metadataBob;
if (isV1ElectionProtocol) {
cmdBob.append("term", _replCoord->getTerm());
metadataBob.append(rpc::kReplSetMetadataFieldName, 1);
}
auto dbName = nsToDatabase(rsOplogName);
auto cmdObj = cmdBob.obj();
auto metadataObj = metadataBob.obj();
Fetcher fetcher(&_threadPoolTaskExecutor,
source,
dbName,
cmdObj,
fetcherCallback,
metadataObj,
_replCoord->getConfig().getElectionTimeoutPeriod());
LOG(1) << "scheduling fetcher to read remote oplog on " << source << " starting at "
<< cmdObj["filter"];
auto scheduleStatus = fetcher.schedule();
if (!scheduleStatus.isOK()) {
warning() << "unable to schedule fetcher to read remote oplog on " << source << ": "
<< scheduleStatus;
return;
}
fetcher.wait();
LOG(1) << "fetcher stopped reading remote oplog on " << source;
// If the background sync is stopped after the fetcher is started, we need to
// re-evaluate our sync source and oplog common point.
if (isStopped()) {
return;
}
if (fetcherReturnStatus.code() == ErrorCodes::OplogOutOfOrder) {
// This is bad because it means that our source
// has not returned oplog entries in ascending ts order, and they need to be.
warning() << fetcherReturnStatus.toString();
// Do not blacklist the server here, it will be blacklisted when we try to reuse it,
// if it can't return a matching oplog start from the last fetch oplog ts field.
return;
} else if (fetcherReturnStatus.code() == ErrorCodes::OplogStartMissing ||
fetcherReturnStatus.code() == ErrorCodes::RemoteOplogStale) {
// Rollback is a synchronous operation that uses the task executor and may not be
// executed inside the fetcher callback.
const int messagingPortTags = 0;
ConnectionPool connectionPool(messagingPortTags);
std::unique_ptr<ConnectionPool::ConnectionPtr> connection;
auto getConnection = [&connection, &connectionPool, source]() -> DBClientBase* {
if (!connection.get()) {
connection.reset(new ConnectionPool::ConnectionPtr(
&connectionPool, source, Date_t::now(), oplogSocketTimeout));
};
return connection->get();
};
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
lastOpTimeFetched = _lastOpTimeFetched;
}
log() << "Starting rollback due to " << fetcherReturnStatus;
// Wait till all buffered oplog entries have drained and been applied.
auto lastApplied = _replCoord->getMyLastAppliedOpTime();
if (lastApplied != lastOpTimeFetched) {
log() << "Waiting for all operations from " << lastApplied << " until "
<< lastOpTimeFetched << " to be applied before starting rollback.";
while (lastOpTimeFetched > (lastApplied = _replCoord->getMyLastAppliedOpTime())) {
sleepmillis(10);
if (isStopped() || inShutdown()) {
return;
}
}
}
// check that we are at minvalid, otherwise we cannot roll back as we may be in an
// inconsistent state
BatchBoundaries boundaries = getMinValid(txn);
if (!boundaries.start.isNull() || boundaries.end > lastApplied) {
fassertNoTrace(18750,
Status(ErrorCodes::UnrecoverableRollbackError,
str::stream()
<< "need to rollback, but in inconsistent state. "
<< "minvalid: " << boundaries.end.toString()
<< " > our last optime: " << lastApplied.toString()));
}
_rollback(txn, source, getConnection);
stop();
} else if (fetcherReturnStatus == ErrorCodes::InvalidBSON) {
Seconds blacklistDuration(60);
warning() << "Fetcher got invalid BSON while querying oplog. Blacklisting sync source "
<< source << " for " << blacklistDuration << ".";
_replCoord->blacklistSyncSource(source, Date_t::now() + blacklistDuration);
} else if (!fetcherReturnStatus.isOK()) {
warning() << "Fetcher error querying oplog: " << fetcherReturnStatus.toString();
}
}
void BackgroundSync::_produce(OperationContext* txn) {
while (MONGO_FAIL_POINT(pauseRsBgSyncProducer)) {
sleepmillis(0);
}
// this oplog reader does not do a handshake because we don't want the server it's syncing
// from to track how far it has synced
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
if (_lastOpTimeFetched.isNull()) {
// then we're initial syncing and we're still waiting for this to be set
lock.unlock();
sleepsecs(1);
// if there is no one to sync from
return;
}
if (!_replCoord->isCatchingUp() &&
(_replCoord->isWaitingForApplierToDrain() || _replCoord->getMemberState().primary())) {
return;
}
if (_inShutdown_inlock()) {
return;
}
}
// find a target to sync from the last optime fetched
OpTime lastOpTimeFetched;
HostAndPort source;
SyncSourceResolverResponse syncSourceResp;
SyncSourceResolver* syncSourceResolver;
OpTime minValid;
if (_replCoord->getMemberState().recovering()) {
auto minValidSaved = StorageInterface::get(txn)->getMinValid(txn);
if (minValidSaved > lastOpTimeFetched) {
minValid = minValidSaved;
}
}
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
lastOpTimeFetched = _lastOpTimeFetched;
_syncSourceHost = HostAndPort();
_syncSourceResolver = stdx::make_unique<SyncSourceResolver>(
_replicationCoordinatorExternalState->getTaskExecutor(),
_replCoord,
lastOpTimeFetched,
minValid,
[&syncSourceResp](const SyncSourceResolverResponse& resp) { syncSourceResp = resp; });
syncSourceResolver = _syncSourceResolver.get();
}
// This may deadlock if called inside the mutex because SyncSourceResolver::startup() calls
// ReplicationCoordinator::chooseNewSyncSource(). ReplicationCoordinatorImpl's mutex has to
// acquired before BackgroundSync's.
// It is safe to call startup() outside the mutex on this instance of SyncSourceResolver because
// we do not destroy this instance outside of this function.
auto status = _syncSourceResolver->startup();
if (ErrorCodes::CallbackCanceled == status || ErrorCodes::isShutdownError(status.code())) {
return;
}
fassertStatusOK(40349, status);
syncSourceResolver->join();
syncSourceResolver = nullptr;
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
_syncSourceResolver.reset();
}
if (syncSourceResp.syncSourceStatus == ErrorCodes::OplogStartMissing) {
// All (accessible) sync sources were too stale.
if (_replCoord->isCatchingUp()) {
warning() << "Too stale to catch up.";
log() << "Our newest OpTime : " << lastOpTimeFetched;
log() << "Earliest OpTime available is " << syncSourceResp.earliestOpTimeSeen
<< " from " << syncSourceResp.getSyncSource();
sleepsecs(1);
return;
}
error() << "too stale to catch up -- entering maintenance mode";
log() << "Our newest OpTime : " << lastOpTimeFetched;
log() << "Earliest OpTime available is " << syncSourceResp.earliestOpTimeSeen;
log() << "See http://dochub.mongodb.org/core/resyncingaverystalereplicasetmember";
auto status = _replCoord->setMaintenanceMode(true);
if (!status.isOK()) {
warning() << "Failed to transition into maintenance mode: " << status;
}
bool worked = _replCoord->setFollowerMode(MemberState::RS_RECOVERING);
if (!worked) {
warning() << "Failed to transition into " << MemberState(MemberState::RS_RECOVERING)
<< ". Current state: " << _replCoord->getMemberState();
}
return;
} else if (syncSourceResp.isOK() && !syncSourceResp.getSyncSource().empty()) {
stdx::lock_guard<stdx::mutex> lock(_mutex);
_syncSourceHost = syncSourceResp.getSyncSource();
source = _syncSourceHost;
} else {
if (!syncSourceResp.isOK()) {
log() << "failed to find sync source, received error "
<< syncSourceResp.syncSourceStatus.getStatus();
}
// No sync source found.
sleepsecs(1);
return;
}
long long lastHashFetched;
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
if (_stopped) {
return;
}
lastOpTimeFetched = _lastOpTimeFetched;
lastHashFetched = _lastFetchedHash;
if (!_replCoord->isCatchingUp()) {
_replCoord->signalUpstreamUpdater();
}
}
// Set the applied point if unset. This is most likely the first time we've established a sync
// source since stepping down or otherwise clearing the applied point. We need to set this here,
// before the OplogWriter gets a chance to append to the oplog.
if (StorageInterface::get(txn)->getAppliedThrough(txn).isNull()) {
StorageInterface::get(txn)->setAppliedThrough(txn, _replCoord->getMyLastAppliedOpTime());
}
// "lastFetched" not used. Already set in _enqueueDocuments.
Status fetcherReturnStatus = Status::OK();
DataReplicatorExternalStateBackgroundSync dataReplicatorExternalState(
_replCoord, _replicationCoordinatorExternalState, this);
OplogFetcher* oplogFetcher;
try {
auto executor = _replicationCoordinatorExternalState->getTaskExecutor();
auto config = _replCoord->getConfig();
auto onOplogFetcherShutdownCallbackFn =
[&fetcherReturnStatus](const Status& status, const OpTimeWithHash& lastFetched) {
fetcherReturnStatus = status;
};
stdx::lock_guard<stdx::mutex> lock(_mutex);
_oplogFetcher = stdx::make_unique<OplogFetcher>(
executor,
OpTimeWithHash(lastHashFetched, lastOpTimeFetched),
source,
NamespaceString(rsOplogName),
config,
_replicationCoordinatorExternalState->getOplogFetcherMaxFetcherRestarts(),
&dataReplicatorExternalState,
stdx::bind(&BackgroundSync::_enqueueDocuments,
this,
stdx::placeholders::_1,
stdx::placeholders::_2,
stdx::placeholders::_3),
onOplogFetcherShutdownCallbackFn);
oplogFetcher = _oplogFetcher.get();
} catch (const mongo::DBException& ex) {
fassertFailedWithStatus(34440, exceptionToStatus());
}
LOG(1) << "scheduling fetcher to read remote oplog on " << _syncSourceHost << " starting at "
<< oplogFetcher->getCommandObject_forTest()["filter"];
auto scheduleStatus = oplogFetcher->startup();
if (!scheduleStatus.isOK()) {
warning() << "unable to schedule fetcher to read remote oplog on " << source << ": "
<< scheduleStatus;
return;
}
oplogFetcher->join();
LOG(1) << "fetcher stopped reading remote oplog on " << source;
// If the background sync is stopped after the fetcher is started, we need to
// re-evaluate our sync source and oplog common point.
if (isStopped()) {
return;
}
if (fetcherReturnStatus.code() == ErrorCodes::OplogOutOfOrder) {
// This is bad because it means that our source
// has not returned oplog entries in ascending ts order, and they need to be.
warning() << redact(fetcherReturnStatus);
// Do not blacklist the server here, it will be blacklisted when we try to reuse it,
// if it can't return a matching oplog start from the last fetch oplog ts field.
return;
} else if (fetcherReturnStatus.code() == ErrorCodes::OplogStartMissing ||
fetcherReturnStatus.code() == ErrorCodes::RemoteOplogStale) {
if (_replCoord->isCatchingUp()) {
warning() << "Rollback situation detected in catch-up mode; catch-up mode will end.";
sleepsecs(1);
return;
}
// Rollback is a synchronous operation that uses the task executor and may not be
// executed inside the fetcher callback.
const int messagingPortTags = 0;
ConnectionPool connectionPool(messagingPortTags);
std::unique_ptr<ConnectionPool::ConnectionPtr> connection;
auto getConnection = [&connection, &connectionPool, source]() -> DBClientBase* {
if (!connection.get()) {
connection.reset(new ConnectionPool::ConnectionPtr(
&connectionPool, source, Date_t::now(), kRollbackOplogSocketTimeout));
};
return connection->get();
};
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
lastOpTimeFetched = _lastOpTimeFetched;
}
log() << "Starting rollback due to " << redact(fetcherReturnStatus);
// Wait till all buffered oplog entries have drained and been applied.
auto lastApplied = _replCoord->getMyLastAppliedOpTime();
if (lastApplied != lastOpTimeFetched) {
log() << "Waiting for all operations from " << lastApplied << " until "
<< lastOpTimeFetched << " to be applied before starting rollback.";
while (lastOpTimeFetched > (lastApplied = _replCoord->getMyLastAppliedOpTime())) {
sleepmillis(10);
if (isStopped() || inShutdown()) {
return;
}
}
}
// check that we are at minvalid, otherwise we cannot roll back as we may be in an
// inconsistent state
const auto minValid = StorageInterface::get(txn)->getMinValid(txn);
if (lastApplied < minValid) {
fassertNoTrace(18750,
Status(ErrorCodes::UnrecoverableRollbackError,
str::stream() << "need to rollback, but in inconsistent state. "
<< "minvalid: "
<< minValid.toString()
<< " > our last optime: "
<< lastApplied.toString()));
}
_rollback(txn, source, getConnection);
stop();
} else if (fetcherReturnStatus == ErrorCodes::InvalidBSON) {
Seconds blacklistDuration(60);
warning() << "Fetcher got invalid BSON while querying oplog. Blacklisting sync source "
<< source << " for " << blacklistDuration << ".";
_replCoord->blacklistSyncSource(source, Date_t::now() + blacklistDuration);
} else if (!fetcherReturnStatus.isOK()) {
warning() << "Fetcher stopped querying remote oplog with error: "
<< redact(fetcherReturnStatus);
}
}
void BackgroundSync::_produce(OperationContext* opCtx) {
if (MONGO_FAIL_POINT(stopReplProducer)) {
// This log output is used in js tests so please leave it.
log() << "bgsync - stopReplProducer fail point "
"enabled. Blocking until fail point is disabled.";
// TODO(SERVER-27120): Remove the return statement and uncomment the while loop.
// Currently we cannot block here or we prevent primaries from being fully elected since
// we'll never call _signalNoNewDataForApplier.
// while (MONGO_FAIL_POINT(stopReplProducer) && !inShutdown()) {
// mongo::sleepsecs(1);
// }
mongo::sleepsecs(1);
return;
}
// this oplog reader does not do a handshake because we don't want the server it's syncing
// from to track how far it has synced
{
stdx::unique_lock<stdx::mutex> lock(_mutex);
if (_lastOpTimeFetched.isNull()) {
// then we're initial syncing and we're still waiting for this to be set
lock.unlock();
sleepsecs(1);
// if there is no one to sync from
return;
}
if (_state != ProducerState::Running) {
return;
}
}
// find a target to sync from the last optime fetched
OpTime lastOpTimeFetched;
HostAndPort source;
HostAndPort oldSource = _syncSourceHost;
SyncSourceResolverResponse syncSourceResp;
{
const OpTime minValidSaved =
_replicationProcess->getConsistencyMarkers()->getMinValid(opCtx);
stdx::lock_guard<stdx::mutex> lock(_mutex);
if (_state != ProducerState::Running) {
return;
}
const auto requiredOpTime = (minValidSaved > _lastOpTimeFetched) ? minValidSaved : OpTime();
lastOpTimeFetched = _lastOpTimeFetched;
_syncSourceHost = HostAndPort();
_syncSourceResolver = stdx::make_unique<SyncSourceResolver>(
_replicationCoordinatorExternalState->getTaskExecutor(),
_replCoord,
lastOpTimeFetched,
requiredOpTime,
[&syncSourceResp](const SyncSourceResolverResponse& resp) { syncSourceResp = resp; });
}
// This may deadlock if called inside the mutex because SyncSourceResolver::startup() calls
// ReplicationCoordinator::chooseNewSyncSource(). ReplicationCoordinatorImpl's mutex has to
// acquired before BackgroundSync's.
// It is safe to call startup() outside the mutex on this instance of SyncSourceResolver because
// we do not destroy this instance outside of this function which is only called from a single
// thread.
auto status = _syncSourceResolver->startup();
if (ErrorCodes::CallbackCanceled == status || ErrorCodes::isShutdownError(status.code())) {
return;
}
fassertStatusOK(40349, status);
_syncSourceResolver->join();
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
_syncSourceResolver.reset();
}
if (syncSourceResp.syncSourceStatus == ErrorCodes::OplogStartMissing) {
// All (accessible) sync sources were too stale.
if (_replCoord->getMemberState().primary()) {
warning() << "Too stale to catch up.";
log() << "Our newest OpTime : " << lastOpTimeFetched;
log() << "Earliest OpTime available is " << syncSourceResp.earliestOpTimeSeen
<< " from " << syncSourceResp.getSyncSource();
_replCoord->abortCatchupIfNeeded().transitional_ignore();
return;
}
// We only need to mark ourselves as too stale once.
if (_tooStale) {
return;
}
// Mark yourself as too stale.
_tooStale = true;
error() << "too stale to catch up -- entering maintenance mode";
log() << "Our newest OpTime : " << lastOpTimeFetched;
log() << "Earliest OpTime available is " << syncSourceResp.earliestOpTimeSeen;
log() << "See http://dochub.mongodb.org/core/resyncingaverystalereplicasetmember";
// Activate maintenance mode and transition to RECOVERING.
auto status = _replCoord->setMaintenanceMode(true);
if (!status.isOK()) {
warning() << "Failed to transition into maintenance mode: " << status;
}
status = _replCoord->setFollowerMode(MemberState::RS_RECOVERING);
if (!status.isOK()) {
warning() << "Failed to transition into " << MemberState(MemberState::RS_RECOVERING)
<< ". Current state: " << _replCoord->getMemberState() << causedBy(status);
}
return;
} else if (syncSourceResp.isOK() && !syncSourceResp.getSyncSource().empty()) {
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
_syncSourceHost = syncSourceResp.getSyncSource();
source = _syncSourceHost;
}
// If our sync source has not changed, it is likely caused by our heartbeat data map being
// out of date. In that case we sleep for 1 second to reduce the amount we spin waiting
// for our map to update.
if (oldSource == source) {
log() << "Chose same sync source candidate as last time, " << source
<< ". Sleeping for 1 second to avoid immediately choosing a new sync source for "
"the same reason as last time.";
sleepsecs(1);
}
} else {
if (!syncSourceResp.isOK()) {
log() << "failed to find sync source, received error "
<< syncSourceResp.syncSourceStatus.getStatus();
}
// No sync source found.
sleepsecs(1);
return;
}
// If we find a good sync source after having gone too stale, disable maintenance mode so we can
// transition to SECONDARY.
if (_tooStale) {
_tooStale = false;
log() << "No longer too stale. Able to sync from " << _syncSourceHost;
auto status = _replCoord->setMaintenanceMode(false);
if (!status.isOK()) {
warning() << "Failed to leave maintenance mode: " << status;
}
}
long long lastHashFetched;
{
stdx::lock_guard<stdx::mutex> lock(_mutex);
if (_state != ProducerState::Running) {
return;
}
lastOpTimeFetched = _lastOpTimeFetched;
lastHashFetched = _lastFetchedHash;
}
if (!_replCoord->getMemberState().primary()) {
_replCoord->signalUpstreamUpdater();
}
// Set the applied point if unset. This is most likely the first time we've established a sync
// source since stepping down or otherwise clearing the applied point. We need to set this here,
// before the OplogWriter gets a chance to append to the oplog.
if (_replicationProcess->getConsistencyMarkers()->getAppliedThrough(opCtx).isNull()) {
_replicationProcess->getConsistencyMarkers()->setAppliedThrough(
opCtx, _replCoord->getMyLastAppliedOpTime());
}
// "lastFetched" not used. Already set in _enqueueDocuments.
Status fetcherReturnStatus = Status::OK();
DataReplicatorExternalStateBackgroundSync dataReplicatorExternalState(
_replCoord, _replicationCoordinatorExternalState, this);
OplogFetcher* oplogFetcher;
try {
auto onOplogFetcherShutdownCallbackFn = [&fetcherReturnStatus](const Status& status) {
fetcherReturnStatus = status;
};
// The construction of OplogFetcher has to be outside bgsync mutex, because it calls
// replication coordinator.
auto oplogFetcherPtr = stdx::make_unique<OplogFetcher>(
_replicationCoordinatorExternalState->getTaskExecutor(),
OpTimeWithHash(lastHashFetched, lastOpTimeFetched),
source,
NamespaceString::kRsOplogNamespace,
_replCoord->getConfig(),
_replicationCoordinatorExternalState->getOplogFetcherMaxFetcherRestarts(),
syncSourceResp.rbid,
true /* requireFresherSyncSource */,
&dataReplicatorExternalState,
stdx::bind(&BackgroundSync::_enqueueDocuments,
this,
stdx::placeholders::_1,
stdx::placeholders::_2,
stdx::placeholders::_3),
onOplogFetcherShutdownCallbackFn,
bgSyncOplogFetcherBatchSize);
stdx::lock_guard<stdx::mutex> lock(_mutex);
if (_state != ProducerState::Running) {
return;
}
_oplogFetcher = std::move(oplogFetcherPtr);
oplogFetcher = _oplogFetcher.get();
} catch (const mongo::DBException& ex) {
fassertFailedWithStatus(34440, exceptionToStatus());
}
const auto logLevel = Command::testCommandsEnabled ? 0 : 1;
LOG(logLevel) << "scheduling fetcher to read remote oplog on " << _syncSourceHost
<< " starting at " << oplogFetcher->getFindQuery_forTest()["filter"];
auto scheduleStatus = oplogFetcher->startup();
if (!scheduleStatus.isOK()) {
warning() << "unable to schedule fetcher to read remote oplog on " << source << ": "
<< scheduleStatus;
return;
}
oplogFetcher->join();
LOG(1) << "fetcher stopped reading remote oplog on " << source;
// If the background sync is stopped after the fetcher is started, we need to
// re-evaluate our sync source and oplog common point.
if (getState() != ProducerState::Running) {
log() << "Replication producer stopped after oplog fetcher finished returning a batch from "
"our sync source. Abandoning this batch of oplog entries and re-evaluating our "
"sync source.";
return;
}
if (fetcherReturnStatus.code() == ErrorCodes::OplogOutOfOrder) {
// This is bad because it means that our source
// has not returned oplog entries in ascending ts order, and they need to be.
warning() << redact(fetcherReturnStatus);
// Do not blacklist the server here, it will be blacklisted when we try to reuse it,
// if it can't return a matching oplog start from the last fetch oplog ts field.
return;
} else if (fetcherReturnStatus.code() == ErrorCodes::OplogStartMissing) {
auto storageInterface = StorageInterface::get(opCtx);
_runRollback(opCtx, fetcherReturnStatus, source, syncSourceResp.rbid, storageInterface);
} else if (fetcherReturnStatus == ErrorCodes::InvalidBSON) {
Seconds blacklistDuration(60);
warning() << "Fetcher got invalid BSON while querying oplog. Blacklisting sync source "
<< source << " for " << blacklistDuration << ".";
_replCoord->blacklistSyncSource(source, Date_t::now() + blacklistDuration);
} else if (!fetcherReturnStatus.isOK()) {
warning() << "Fetcher stopped querying remote oplog with error: "
<< redact(fetcherReturnStatus);
}
}