MainWindow::~MainWindow()
{
if (snmp)
{
delete snmp;
snmp = 0;
}
if (v3mp)
{
USM *usm = v3mp->get_usm();
// Save USM users with their passwords into a file
// The passwords are not encrypted!
if (SNMPv3_USM_OK != usm->save_users(FILE_USERS))
{
QString err = "\nCould not save users to file file.\n";
text_edit_output->append(err);
}
delete v3mp;
v3mp = 0;
}
Snmp::socket_cleanup(); // Shut down socket subsystem
}
void MainWindow::update_combobox_sec_name()
{
USM *usm = v3mp->get_usm();
combo_box_sec_name->clear();
// get all security names
usm->lock_user_name_table(); // lock table for peek_XXX()
const struct UsmUserNameTableEntry *user = usm->peek_first_user();
QStringList names;
QString initial("initial");
QString to_add;
while (user)
{
to_add.setAscii((const char*)(user->usmUserSecurityName.data()),
user->usmUserSecurityName.len());
if (!names.contains(to_add) && (to_add != initial))
names += to_add;
user = usm->peek_next_user(user);
}
usm->unlock_user_name_table(); // unlock table
combo_box_sec_name->insertStringList(names);
}
int CSVBaseSNMP::InitSNMPV3()
{
static const char chEngineId[] = "snmpWalk"; //Engine ID
static const char chFilename[] = "snmpv3_boot_counter"; //Local File Name
unsigned int snmpEngineBoots = 0;
int nStatus = 0;
//Get Current Boot Counter
nStatus = getBootCounter(chFilename, chEngineId, snmpEngineBoots);
if ( nStatus != SNMPv3_OK && nStatus < SNMPv3_FILEOPEN_ERROR )
{
return 1;
}
//Add Boot Counter
snmpEngineBoots ++;
//Save Boot Counter In File
nStatus = saveBootCounter(chFilename, chEngineId, snmpEngineBoots);
if (nStatus != SNMPv3_OK)
{//Save File Failed
return 1;
}
//Construct Status
int construct_status;
//Create v3MP Class By Engine ID and Boot Counter, return Result into
//Construct status
v3MP *v3_MP = new v3MP(chEngineId, snmpEngineBoots, construct_status);
if(v3_MP)
{
//Get v3MP Property (Point to USM Class)
USM *usm = v3_MP->get_usm();
//Set USM Discovery Mode
usm->set_discovery_mode();
//Add Auth User , Auth Password and Private Password
usm->add_usm_user(m_szSecurityName, m_lAuthProtocol, m_lPrivProtocol, m_szAuthPassword, m_szPrivPassword);
//Return Status
delete v3_MP;
}
return 0;
}
/////////////////////////////////////////////////////////////////////////////
// 函数: InitSNMPV3 //
// 说明: 当SNMP版本是3，初始化环境变量 //
// 参数: //
// 无 //
// 返回值: //
// 成功为0 ，否则为1 //
/////////////////////////////////////////////////////////////////////////////
int BasicSNMP::InitSNMPV3()
{
char *engineId = "snmpWalk";//Engine ID
char *filename = "snmpv3_boot_counter"; //Local File Name
unsigned int snmpEngineBoots = 0;
int status = 0;
//Get Current Boot Counter
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
return 1;
}
//Add Boot Counter
snmpEngineBoots++;
//Save Boot Counter In File
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{//Save File Failed
return 1;
}
//Construct Status
int construct_status;
//Create v3MP Class By Engine ID and Boot Counter, return Result into
//Construct status
v3MP *v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
//Get v3MP Property (Point to USM Class)
USM *usm = v3_MP->get_usm();
//Set USM Discovery Mode
usm->set_discovery_mode();
//Add Auth User , Auth Password and Private Password
usm->add_usm_user(securityName, authProtocol, privProtocol,
authPassword, privPassword);
//Return Status
delete v3_MP;
return 0;
}
MainWindow::MainWindow(QWidget* parent, const char* name, WFlags fl)
: MainWindowPrivate(parent, name, fl)
{
int status;
#ifndef _NO_LOGGING
DefaultLog::log()->set_filter(ERROR_LOG, 5);
DefaultLog::log()->set_filter(WARNING_LOG, 5);
DefaultLog::log()->set_filter(EVENT_LOG, 5);
DefaultLog::log()->set_filter(INFO_LOG, 5);
DefaultLog::log()->set_filter(DEBUG_LOG, 8);
// Write debug info to a file
DefaultLog::init(new AgentLogImpl("QtExample.log"));
#endif
Snmp::socket_startup(); // Initialize socket subsystem
connect(&timer, SIGNAL(timeout()), this, SLOT(timer_expired()));
// get the Boot counter (you may use any own method for this)
char *engineId = "not_needed";
char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
QString err = QString("Error loading snmpEngineBoots counter: %1\n")
.arg(status);
text_edit_output->append(err);
}
// increase the boot counter
snmpEngineBoots++;
// save the boot counter
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
QString err = QString("Error saving snmpEngineBoots counter: %1\n")
.arg(status);
text_edit_output->append(err);
}
// Create our SNMP session object
snmp = new Snmp(status);
if (status != SNMP_CLASS_SUCCESS)
{
QString err = "\nCould not create SNMP++ session:\n";
err += Snmp::error_msg(status);
text_edit_output->append(err);
}
// If _SNMPv3 is enabled we MUST create ONE v3MP object!
v3mp = new v3MP(engineId, snmpEngineBoots, status);
if (status != SNMPv3_MP_OK)
{
QString err = "\nCould not create v3MP object:\n";
err += Snmp::error_msg(status);
text_edit_output->append(err);
}
// The v3MP creates a USM object, get the pointer to it
USM *usm = v3mp->get_usm();
// Load the USM users from a file
if (SNMPv3_USM_OK != usm->load_users(FILE_USERS))
{
QString err = "\nCould not load users from file.\n";
text_edit_output->append(err);
}
#if 0 // Localized users will be created automatically!
if (SNMPv3_USM_OK != usm->load_localized_users(FILE_LOCALIZED_USERS))
{
QString err = "\nCould not load localized users from file.\n";
text_edit_output->append(err);
}
#endif
update_combobox_sec_name();
}
int main(int argc, char **argv)
{
//---------[ check the arg count ]----------------------------------------
if ( argc < 2) {
cout << "Usage:\n";
cout << argv[0] << " IpAddress | DNSName [Oid] [options]\n";
cout << "Oid: sysDescr object is default\n";
cout << "options: -vN , use SNMP version 1, 2 or 3, default is 1\n";
cout << " -PPort , remote port to use\n";
cout << " -CCommunity_name, specify community default is 'public' \n";
cout << " -rN , retries default is N = 1 retry\n";
cout << " -tN , timeout in hundredths of seconds; default is N = 100\n";
#ifdef _SNMPv3
cout << " -snSecurityName, " << endl;
cout << " -slN , securityLevel to use, default N = 3 = authPriv" << endl;
cout << " -smN , securityModel to use, only default N = 3 = USM possible\n";
cout << " -cnContextName, default empty string" << endl;
cout << " -ceContextEngineID, as hex e.g. 800007E580, default empty string" << endl;
cout << " -authPROT, use authentication protocol NONE, SHA or MD5\n";
cout << " -privPROT, use privacy protocol NONE, DES, 3DESEDE, IDEA, AES128, AES192 or AES256\n";
cout << " -uaAuthPassword\n";
cout << " -upPrivPassword\n";
#endif
return 1;
}
Snmp::socket_startup(); // Initialize socket subsystem
//---------[ make a GenAddress and Oid object to retrieve ]---------------
UdpAddress address( argv[1]); // make a SNMP++ Generic address
if ( !address.valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[1] << "\n";
return 1;
}
Oid oid("1.3.6.1.2.1.1.1"); // default is sysDescr
if ( argc >= 3) { // if 3 args, then use the callers Oid
if ( strstr( argv[2],"-")==0) {
oid = argv[2];
if ( !oid.valid()) { // check validity of user oid
cout << "Invalid Oid, " << argv[2] << "\n";
return 1;
}
}
}
//---------[ determine options to use ]-----------------------------------
snmp_version version=version1; // default is v1
int retries=1; // default retries is 1
int timeout=100; // default is 1 second
u_short port=161; // default snmp port is 161
OctetStr community("public"); // community name
#ifdef _SNMPv3
OctetStr privPassword("");
OctetStr authPassword("");
OctetStr securityName("");
int securityModel = SecurityModel_USM;
int securityLevel = SecurityLevel_authPriv;
OctetStr contextName("");
OctetStr contextEngineID("");
long authProtocol = SNMPv3_usmNoAuthProtocol;
long privProtocol = SNMPv3_usmNoPrivProtocol;
v3MP *v3_MP;
#endif
char *ptr;
for(int x=1; x<argc; x++) { // parse for version
if ( strstr( argv[x],"-v2")!= 0) {
version = version2c;
continue;
}
if ( strstr( argv[x],"-r")!= 0) { // parse for retries
ptr = argv[x];
ptr++;
ptr++;
retries = atoi(ptr);
if (( retries<0)|| (retries>5)) retries=1;
continue;
}
if ( strstr( argv[x], "-t")!=0) { // parse for timeout
ptr = argv[x];
ptr++;
ptr++;
timeout = atoi( ptr);
if (( timeout < 100)||( timeout>500)) timeout=100;
continue;
}
if ( strstr( argv[x],"-C")!=0) {
ptr = argv[x];
ptr++;
ptr++;
community = ptr;
continue;
}
if ( strstr( argv[x],"-P")!=0) {
ptr = argv[x];
ptr++;
ptr++;
sscanf(ptr, "%hu", &port);
continue;
}
#ifdef _SNMPv3
if ( strstr( argv[x],"-v3")!= 0) {
version = version3;
continue;
}
if ( strstr( argv[x],"-auth") != 0) {
ptr = argv[x];
ptr+=5;
if (strcasecmp(ptr, "SHA") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACSHA;
else if (strcasecmp(ptr, "MD5") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACMD5;
else
authProtocol = SNMP_AUTHPROTOCOL_NONE;
continue;
}
if ( strstr( argv[x],"-priv") != 0) {
ptr = argv[x];
ptr+=5;
if (strcasecmp(ptr, "DES") == 0)
privProtocol = SNMP_PRIVPROTOCOL_DES;
else if (strcasecmp(ptr, "3DESEDE") == 0)
privProtocol = SNMP_PRIVPROTOCOL_3DESEDE;
else if (strcasecmp(ptr, "IDEA") == 0)
privProtocol = SNMP_PRIVPROTOCOL_IDEA;
else if (strcasecmp(ptr, "AES128") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES128;
else if (strcasecmp(ptr, "AES192") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES192;
else if (strcasecmp(ptr, "AES256") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES256;
else
privProtocol = SNMP_PRIVPROTOCOL_NONE;
printf("\n\nPrivProt : %ld\n", privProtocol);
continue;
}
if ( strstr( argv[x],"-sn")!=0) {
ptr = argv[x];
ptr+=3;
securityName = ptr;
continue;
}
if ( strstr( argv[x], "-sl")!=0) {
ptr = argv[x];
ptr+=3;
securityLevel = atoi( ptr);
if (( securityLevel < SecurityLevel_noAuthNoPriv) ||
( securityLevel > SecurityLevel_authPriv))
securityLevel = SecurityLevel_authPriv;
continue;
}
if ( strstr( argv[x], "-sm")!=0) {
ptr = argv[x];
ptr+=3;
securityModel = atoi( ptr);
if (( securityModel < SecurityModel_v1) ||
( securityModel > SecurityModel_USM))
securityModel = SecurityModel_USM;
continue;
}
if ( strstr( argv[x],"-cn")!=0) {
ptr = argv[x];
ptr+=3;
contextName = ptr;
continue;
}
if ( strstr( argv[x],"-ce")!=0) {
ptr = argv[x];
ptr+=3;
contextEngineID = OctetStr::from_hex_string(ptr);
continue;
}
if ( strstr( argv[x],"-ua")!=0) {
ptr = argv[x];
ptr+=3;
authPassword = ptr;
continue;
}
if ( strstr( argv[x],"-up")!=0) {
ptr = argv[x];
ptr+=3;
privPassword = ptr;
continue;
}
#endif
}
//----------[ create a SNMP++ session ]-----------------------------------
int status;
// bind to any port and use IPv6 if needed
Snmp snmp(status, 0, (address.get_ip_version() == Address::version_ipv6));
if ( status != SNMP_CLASS_SUCCESS) {
cout << "SNMP++ Session Create Fail, " << snmp.error_msg(status) << "\n";
return 1;
}
//---------[ init SnmpV3 ]--------------------------------------------
#ifdef _SNMPv3
if (version == version3) {
char *engineId = "snmpNextAsync";
char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
int status;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
cout << "Error loading snmpEngineBoots counter: " << status << endl;
return 1;
}
snmpEngineBoots++;
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
cout << "Error saving snmpEngineBoots counter: " << status << endl;
return 1;
}
int construct_status;
v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
USM *usm = v3_MP->get_usm();
usm->add_usm_user(securityName,
authProtocol, privProtocol,
authPassword, privPassword);
}
else
{
// MUST create a dummy v3MP object if _SNMPv3 is enabled!
int construct_status;
v3_MP = new v3MP("dummy", 0, construct_status);
}
#endif
//--------[ build up SNMP++ object needed ]-------------------------------
Pdu pdu; // construct a Pdu object
Vb vb; // construct a Vb object
vb.set_oid( oid); // set the Oid portion of the Vb
pdu += vb; // add the vb to the Pdu
address.set_port(port);
CTarget ctarget( address); // make a target using the address
#ifdef _SNMPv3
UTarget utarget( address);
if (version == version3) {
utarget.set_version( version); // set the SNMP version SNMPV1 or V2 or V3
utarget.set_retry( retries); // set the number of auto retries
utarget.set_timeout( timeout); // set timeout
utarget.set_security_model( securityModel);
utarget.set_security_name( securityName);
pdu.set_security_level( securityLevel);
pdu.set_context_name (contextName);
pdu.set_context_engine_id(contextEngineID);
}
else {
#endif
ctarget.set_version( version); // set the SNMP version SNMPV1 or V2
ctarget.set_retry( retries); // set the number of auto retries
ctarget.set_timeout( timeout); // set timeout
ctarget.set_readcommunity( community); // set the read community name
#ifdef _SNMPv3
}
#endif
//-------[ issue the request, blocked mode ]-----------------------------
cout << "SNMP++ GetNext to " << argv[1] << " SNMPV"
#ifdef _SNMPv3
<< ((version==version3) ? (version) : (version+1))
#else
<< (version+1)
#endif
<< " Retries=" << retries
<< " Timeout=" << timeout * 10 <<"ms";
#ifdef _SNMPv3
if (version == version3)
cout << endl
<< "securityName= " << securityName.get_printable()
<< ", securityLevel= " << securityLevel
<< ", securityModel= " << securityModel << endl
<< "contextName= " << contextName.get_printable()
<< ", contextEngineID= " << contextEngineID.get_printable()
<< endl;
else
#endif
cout << " Community=" << community.get_printable() << endl << flush;
SnmpTarget *target;
#ifdef _SNMPv3
if (version == version3)
target = &utarget;
else
#endif
target = &ctarget;
status = snmp.get_next( pdu, *target, callback,NULL);
if (status == SNMP_CLASS_SUCCESS)
{
cout << "Async GetNext Request sent." << endl;
}
else
cout << "SNMP++ GetNext Error, " << snmp.error_msg( status)
<< " (" << status <<")" << endl ;
for (int t=1; t<=10; t++)
{
snmp.eventListHolder->SNMPProcessPendingEvents();
#ifdef WIN32
Sleep(1000);
#else
sleep(1);
#endif
}
Snmp::socket_cleanup(); // Shut down socket subsystem
}
int main(int argc, char **argv)
{
//---------[ check the arg count ]----------------------------------------
if ( argc < 2 )
usage();
if ( strstr( argv[1],"-h") != 0 )
help();
if ( strstr( argv[1],"-?") != 0 )
usage();
#if !defined(_NO_LOGGING) && !defined(WITH_LOG_PROFILES)
// Set filter for logging
DefaultLog::log()->set_filter(ERROR_LOG, 7);
DefaultLog::log()->set_filter(WARNING_LOG, 7);
DefaultLog::log()->set_filter(EVENT_LOG, 7);
DefaultLog::log()->set_filter(INFO_LOG, 7);
DefaultLog::log()->set_filter(DEBUG_LOG, 7);
#endif
Snmp::socket_startup(); // Initialize socket subsystem
//---------[ make a GenAddress and Oid object to retrieve ]---------------
UdpAddress address( argv[1]); // make a SNMP++ Generic address
if ( !address.valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[1] << "\n";
usage();
}
Oid oid("1.3.6.1.2.1.1.1"); // default is sysDescr
if ( argc >= 3) { // if 3 args, then use the callers Oid
if ( strstr( argv[2],"-")==0) {
oid = argv[2];
if ( !oid.valid()) { // check validity of user oid
cout << "Invalid Oid, " << argv[2] << "\n";
usage();
}
}
}
// cout << "GETNEXT for OID " << oid.get_printable() << "\n";
//---------[ determine options to use ]-----------------------------------
snmp_version version=version1; // default is v1
int retries=1; // default retries is 1
int timeout=100; // default is 1 second
u_short port=161; // default snmp port is 161
OctetStr community("public"); // community name
#ifdef _SNMPv3
OctetStr privPassword("");
OctetStr authPassword("");
OctetStr securityName("");
int securityModel = SNMP_SECURITY_MODEL_USM;
int securityLevel = SNMP_SECURITY_LEVEL_AUTH_PRIV;
OctetStr contextName("");
OctetStr contextEngineID("");
long authProtocol = SNMP_AUTHPROTOCOL_NONE;
long privProtocol = SNMP_PRIVPROTOCOL_NONE;
v3MP *v3_MP;
#endif
char *ptr;
for(int x=1;x<argc;x++) { // parse for version
if ( strstr( argv[x],"-v2")!= 0) {
version = version2c;
continue;
}
if ( strstr( argv[x],"-r")!= 0) { // parse for retries
ptr = argv[x]; ptr++; ptr++;
retries = atoi(ptr);
if (( retries<0)|| (retries>5)) retries=1;
continue;
}
if ( strstr( argv[x], "-t")!=0) { // parse for timeout
ptr = argv[x]; ptr++; ptr++;
timeout = atoi( ptr);
if (( timeout < 100)||( timeout>500)) timeout=100;
continue;
}
if ( strstr( argv[x],"-C")!=0) {
ptr = argv[x]; ptr++; ptr++;
community = ptr;
continue;
}
if ( strstr( argv[x],"-P")!=0) {
ptr = argv[x]; ptr++; ptr++;
sscanf(ptr, "%hu", &port);
continue;
}
#ifdef WITH_LOG_PROFILES
if ( strstr( argv[x], "-L" ) != 0 ) {
ptr = argv[x]; ptr++; ptr++;
DefaultLog::log()->set_profile(ptr);
}
#endif
#ifdef _SNMPv3
if ( strstr( argv[x],"-v3")!= 0) {
version = version3;
continue;
}
if ( strstr( argv[x],"-auth") != 0) {
ptr = argv[x]; ptr+=5;
if (strcasecmp(ptr, "SHA") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACSHA;
else if (strcasecmp(ptr, "MD5") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACMD5;
else if (strcasecmp(ptr, "NONE") == 0)
authProtocol = SNMP_AUTHPROTOCOL_NONE;
else
cout << "Warning: ignoring unknown auth protocol: " << ptr << endl;
continue;
}
if ( strstr( argv[x],"-priv") != 0) {
ptr = argv[x]; ptr+=5;
if (strcasecmp(ptr, "DES") == 0)
privProtocol = SNMP_PRIVPROTOCOL_DES;
else if (strcasecmp(ptr, "3DESEDE") == 0)
privProtocol = SNMP_PRIVPROTOCOL_3DESEDE;
else if (strcasecmp(ptr, "IDEA") == 0)
privProtocol = SNMP_PRIVPROTOCOL_IDEA;
else if (strcasecmp(ptr, "AES128") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES128;
else if (strcasecmp(ptr, "AES192") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES192;
else if (strcasecmp(ptr, "AES256") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES256;
else if (strcasecmp(ptr, "NONE") == 0)
privProtocol = SNMP_PRIVPROTOCOL_NONE;
else
cout << "Warning: ignoring unknown priv protocol: " << ptr << endl;
continue;
}
if ( strstr( argv[x],"-sn")!=0) {
ptr = argv[x]; ptr+=3;
securityName = ptr;
continue;
}
if ( strstr( argv[x], "-sl")!=0) {
ptr = argv[x]; ptr+=3;
securityLevel = atoi( ptr);
if (( securityLevel < SNMP_SECURITY_LEVEL_NOAUTH_NOPRIV) ||
( securityLevel > SNMP_SECURITY_LEVEL_AUTH_PRIV))
securityLevel = SNMP_SECURITY_LEVEL_AUTH_PRIV;
continue;
}
if ( strstr( argv[x], "-sm")!=0) {
ptr = argv[x]; ptr+=3;
securityModel = atoi( ptr);
if (( securityModel < SNMP_SECURITY_MODEL_V1) ||
( securityModel > SNMP_SECURITY_MODEL_USM))
securityModel = SNMP_SECURITY_MODEL_USM;
continue;
}
if ( strstr( argv[x],"-cn")!=0) {
ptr = argv[x]; ptr+=3;
contextName = ptr;
continue;
}
if ( strstr( argv[x],"-ce")!=0) {
ptr = argv[x]; ptr+=3;
contextEngineID = OctetStr::from_hex_string(ptr);
continue;
}
if ( strstr( argv[x],"-ua")!=0) {
ptr = argv[x]; ptr+=3;
authPassword = ptr;
continue;
}
if ( strstr( argv[x],"-up")!=0) {
ptr = argv[x]; ptr+=3;
privPassword = ptr;
continue;
}
#endif
}
//----------[ create a SNMP++ session ]-----------------------------------
int status;
// bind to any port and use IPv6 if needed
Snmp snmp(status, 0, (address.get_ip_version() == Address::version_ipv6));
if ( status != SNMP_CLASS_SUCCESS) {
cout << "SNMP++ Session Create Fail, " << snmp.error_msg(status) << "\n";
return 1;
}
//---------[ init SnmpV3 ]--------------------------------------------
#ifdef _SNMPv3
if (version == version3) {
const char *engineId = "snmpNext";
const char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
int status;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
cout << "Error loading snmpEngineBoots counter: " << status << endl;
return 1;
}
snmpEngineBoots++;
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
cout << "Error saving snmpEngineBoots counter: " << status << endl;
return 1;
}
int construct_status;
v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
if (construct_status != SNMPv3_MP_OK)
{
cout << "Error initializing v3MP: " << construct_status << endl;
return 1;
}
USM *usm = v3_MP->get_usm();
usm->add_usm_user(securityName,
authProtocol, privProtocol,
authPassword, privPassword);
}
else
{
// MUST create a dummy v3MP object if _SNMPv3 is enabled!
int construct_status;
v3_MP = new v3MP("dummy", 0, construct_status);
}
#endif
//--------[ build up SNMP++ object needed ]-------------------------------
Pdu pdu; // construct a Pdu object
Vb vb; // construct a Vb object
vb.set_oid( oid); // set the Oid portion of the Vb
pdu += vb; // add the vb to the Pdu
address.set_port(port);
CTarget ctarget( address); // make a target using the address
#ifdef _SNMPv3
UTarget utarget( address);
if (version == version3) {
utarget.set_version( version); // set the SNMP version SNMPV1 or V2 or V3
utarget.set_retry( retries); // set the number of auto retries
utarget.set_timeout( timeout); // set timeout
utarget.set_security_model( securityModel);
utarget.set_security_name( securityName);
pdu.set_security_level( securityLevel);
pdu.set_context_name (contextName);
pdu.set_context_engine_id(contextEngineID);
}
else {
#endif
ctarget.set_version( version); // set the SNMP version SNMPV1 or V2
ctarget.set_retry( retries); // set the number of auto retries
ctarget.set_timeout( timeout); // set timeout
ctarget.set_readcommunity( community); // set the read community name
#ifdef _SNMPv3
}
#endif
//-------[ issue the request, blocked mode ]-----------------------------
cout << "SNMP++ GetNext to " << argv[1] << " SNMPV"
#ifdef _SNMPv3
<< ((version==version3) ? (version) : (version+1))
#else
<< (version+1)
#endif
<< " Retries=" << retries
<< " Timeout=" << timeout * 10 <<"ms";
#ifdef _SNMPv3
if (version == version3)
cout << endl
<< "securityName= " << securityName.get_printable()
<< ", securityLevel= " << securityLevel
<< ", securityModel= " << securityModel << endl
<< "contextName= " << contextName.get_printable()
<< ", contextEngineID= " << contextEngineID.get_printable()
<< endl;
else
#endif
cout << " Community=" << community.get_printable() << endl << flush;
SnmpTarget *target;
#ifdef _SNMPv3
if (version == version3)
target = &utarget;
else
#endif
target = &ctarget;
status = snmp.get_next( pdu, *target);
if (status == SNMP_CLASS_SUCCESS)
{
pdu.get_vb( vb,0);
#ifdef _SNMPv3
if (pdu.get_type() == REPORT_MSG) {
cout << "Received a report pdu: "
<< snmp.error_msg(vb.get_printable_oid()) << endl;
}
#endif
cout << "Oid = " << vb.get_printable_oid() << endl
<< "Value = " << vb.get_printable_value() << endl;
}
else
{
cout << "SNMP++ GetNext Error, " << snmp.error_msg( status)
<< " (" << status <<")" << endl;
}
Snmp::socket_cleanup(); // Shut down socket subsystem
}
int main_bulk_jun( int argc, char **argv)
{
{
cout << "Usage:\n";
cout << "snmpBulk IpAddress | DNSName [Oid [Oid...]] [options]\n";
cout << "Oid: sysDescr object is default\n";
cout << "options: -v1 , use SNMPV1, default\n";
cout << " -v2 , use SNMPV2\n";
#ifdef _SNMPv3
cout << " -v3 , use SNMPV3\n";
#endif
cout << " -pPort , remote port to use\n";
cout << " -CCommunity_name, specify community default is 'public' \n";
cout << " -rN , retries default is N = 1 retry\n";
cout << " -tN , timeout in hundredths of seconds; default is N = 100\n";
cout << " -nN , non-repeaters default is N = 0\n";
cout << " -mN , max-repetitions default is N = 1\n";
#ifdef _SNMPv3
cout << " -snSecurityName, " << endl;
cout << " -slN , securityLevel to use, default N = 3 = authPriv" << endl;
cout << " -smN , securityModel to use, only default N = 3 = USM possible\n";
cout << " -cnContextName, default """"" << endl;
cout << " -ceContextEngineID, default """"" << endl;
cout << " -md5 , use MD5 authentication protocol\n";
cout << " -sha , use SHA authentication protocol\n";
cout << " -des , use DES privacy protocol\n";
cout << " -idea, use IDEA privacy protocol\n";
cout << " -aes128, use AES128 privacy protocol\n";
cout << " -aes192, use AES192 privacy protocol\n";
cout << " -aes256, use AES256 privacy protocol\n";
cout << " -uaAuthPassword\n";
cout << " -upPrivPassword\n";
#endif
}
//---------[ check the arg count ]----------------------------------------
if ( argc < 2) {
return 1;
}
Snmp::socket_startup(); // Initialize socket subsystem
//---------[ make a GenAddress and Oid object to retrieve ]---------------
UdpAddress address( argv[1]); // make a SNMP++ Generic address
if ( !address.valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[1] << "\n";
return 1;
}
Pdu pdu; // construct a Pdu object
Vb vb; // construct a Vb object
if ( argc >= 3) { // if 3 args, then use the callers Oid
int i=2;
while ((strstr(argv[i],"-")==0) && (i<argc)) {
Oid oid(argv[i]);
if ( !oid.valid()) { // check validity of user oid
cout << "Invalid Oid, " << argv[2] << "\n";
return -2;
}
vb.set_oid(oid);
pdu += vb;
i++;
}
}
else {
Oid oid("1.3.6.1.2.1.1.1"); // default is sysDescr
vb.set_oid(oid);
pdu += vb; // add the vb to the Pdu
}
//jun add
{
Oid oid ("1.3.6.1.2.1.1.6.0");
vb.set_oid(oid);
pdu += vb;
Oid oid2("1.3.6.1.2.1.1.3.0");
vb.set_oid(oid2);
pdu += vb;
Oid oid3("1.3.6.1.2.1.1.5.0");
vb.set_oid(oid3);
pdu += vb;
Oid oidx("1.3.6.1.2.1.1.5");
vb.set_oid(oidx);
pdu += vb;
Oid oid4("1.3.6.1.2.1.25.5.1.1");
vb.set_oid(oid4);
pdu += vb;
}
//---------[ determine options to use ]-----------------------------------
snmp_version version=version1; // default is v1
int retries=1; // default retries is 1
int timeout=100; // default is 1 second
u_short port=161; // default snmp port is 161
OctetStr community("public"); // community name
int non_reps=2; // non repeaters default is 0
int max_reps=20; // maximum repetitions default is 1
#ifdef _SNMPv3
OctetStr privPassword("");
OctetStr authPassword("");
OctetStr securityName("");
int securityModel = SecurityModel_USM;
int securityLevel = SecurityLevel_authPriv;
OctetStr contextName("");
OctetStr contextEngineID("");
long authProtocol = SNMPv3_usmNoAuthProtocol;
long privProtocol = SNMPv3_usmNoPrivProtocol;
v3MP *v3_MP;
#endif
char *ptr;
for(int x=1;x<argc;x++) { // parse for version
if ( strstr( argv[x],"-v2")!= 0) {
version = version2c;
continue;
}
if ( strstr( argv[x],"-r")!= 0) { // parse for retries
ptr = argv[x]; ptr++; ptr++;
retries = atoi(ptr);
if (( retries<0)|| (retries>5)) retries=1;
continue;
}
if ( strstr( argv[x], "-t")!=0) { // parse for timeout
ptr = argv[x]; ptr++; ptr++;
timeout = atoi( ptr);
if (( timeout < 100)||( timeout>500)) timeout=100;
continue;
}
if ( strstr( argv[x],"-n")!=0) { // parse for non repeaters
ptr = argv[x];ptr++;ptr++;
non_reps=atoi( ptr);
if (( non_reps < 0)||( non_reps>10)) non_reps=0;
}
if ( strstr( argv[x],"-m")!=0) { // parse for max repetitions
ptr = argv[x];ptr++;ptr++;
max_reps=atoi( ptr);
if ( max_reps < 0) max_reps=1;
}
if ( strstr( argv[x],"-C")!=0) {
ptr = argv[x]; ptr++; ptr++;
community = ptr;
continue;
}
if ( strstr( argv[x],"-p")!=0) {
ptr = argv[x]; ptr++; ptr++;
sscanf(ptr, "%hu", &port);
continue;
}
#ifdef _SNMPv3
if ( strstr( argv[x],"-v3")!= 0) {
version = version3;
continue;
}
if ( strstr( argv[x],"-idea") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmIDEAPrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes128") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES128PrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes192") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES192PrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes256") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES256PrivProtocol;
continue;
}
if ( strstr( argv[x],"-sha") != 0) {
ptr = argv[x]; ptr++; ptr++;
authProtocol = SNMPv3_usmHMACSHAAuthProtocol;
continue;
}
if ( strstr( argv[x],"-des") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmDESPrivProtocol;
continue;
}
if ( strstr( argv[x],"-md5") != 0) {
ptr = argv[x]; ptr++; ptr++;
authProtocol = SNMPv3_usmHMACMD5AuthProtocol;
continue;
}
if ( strstr( argv[x],"-sn")!=0) {
ptr = argv[x]; ptr+=3;
securityName = ptr;
continue;
}
if ( strstr( argv[x], "-sl")!=0) {
ptr = argv[x]; ptr+=3;
securityLevel = atoi( ptr);
if (( securityLevel < SecurityLevel_noAuthNoPriv) ||
( securityLevel > SecurityLevel_authPriv))
securityLevel = SecurityLevel_authPriv;
continue;
}
if ( strstr( argv[x], "-sm")!=0) {
ptr = argv[x]; ptr+=3;
securityModel = atoi( ptr);
if (( securityModel < SecurityModel_v1) ||
( securityModel > SecurityModel_USM))
securityModel = SecurityModel_USM;
continue;
}
if ( strstr( argv[x],"-cn")!=0) {
ptr = argv[x]; ptr+=3;
contextName = ptr;
continue;
}
if ( strstr( argv[x],"-ce")!=0) {
ptr = argv[x]; ptr+=3;
contextEngineID = ptr;
continue;
}
if ( strstr( argv[x],"-ua")!=0) {
ptr = argv[x]; ptr+=3;
authPassword = ptr;
continue;
}
if ( strstr( argv[x],"-up")!=0) {
ptr = argv[x]; ptr+=3;
privPassword = ptr;
continue;
}
#endif
}
//----------[ create a SNMP++ session ]-----------------------------------
int status;
// bind to any port and use IPv6 if needed
Snmp snmp(status, 0, (address.get_ip_version() == Address::version_ipv6));
if ( status != SNMP_CLASS_SUCCESS) {
cout << "SNMP++ Session Create Fail, " << snmp.error_msg(status) << "\n";
return 1;
}
//---------[ init SnmpV3 ]--------------------------------------------
#ifdef _SNMPv3
if (version == version3) {
char *engineId = "snmpBulk";
char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
int status;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
cout << "Error loading snmpEngineBoots counter: " << status << endl;
return 1;
}
snmpEngineBoots++;
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
cout << "Error saving snmpEngineBoots counter: " << status << endl;
return 1;
}
int construct_status;
v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
USM *usm = v3_MP->get_usm();
usm->add_usm_user(securityName,
authProtocol, privProtocol,
authPassword, privPassword);
}
else
{
// MUST create a dummy v3MP object if _SNMPv3 is enabled!
int construct_status;
v3_MP = new v3MP("dummy", 0, construct_status);
}
#endif
//--------[ build up SNMP++ object needed ]-------------------------------
address.set_port(port);
CTarget ctarget( address); // make a target using the address
#ifdef _SNMPv3
UTarget utarget( address);
if (version == version3) {
utarget.set_version( version); // set the SNMP version SNMPV1 or V2 or V3
utarget.set_retry( retries); // set the number of auto retries
utarget.set_timeout( timeout); // set timeout
utarget.set_security_model( securityModel);
utarget.set_security_name( securityName);
pdu.set_security_level( securityLevel);
pdu.set_context_name (contextName);
pdu.set_context_engine_id(contextEngineID);
}
else {
#endif
ctarget.set_version( version); // set the SNMP version SNMPV1 or V2
ctarget.set_retry( retries); // set the number of auto retries
ctarget.set_timeout( timeout); // set timeout
ctarget.set_readcommunity( community); // set the read community name
#ifdef _SNMPv3
}
#endif
//-------[ issue the request, blocked mode ]-----------------------------
cout << "SNMP++ GetBulk to " << argv[1] << " SNMPV"
#ifdef _SNMPv3
<< ((version==version3) ? (version) : (version+1))
#else
<< (version+1)
#endif
<< " Retries=" << retries
<< " Timeout=" << timeout << "ms"
<< " Non Reptrs=" << non_reps
<< " Max Reps=" << max_reps << endl;
#ifdef _SNMPv3
if (version == version3)
cout << endl
<< "securityName= " << securityName.get_printable()
<< ", securityLevel= " << securityLevel
<< ", securityModel= " << securityModel << endl
<< "contextName= " << contextName.get_printable()
<< ", contextEngineID= " << contextEngineID.get_printable()
<< endl;
else
#endif
cout << " Community=" << community.get_printable() << endl << flush;
SnmpTarget *target;
#ifdef _SNMPv3
if (version == version3)
target = &utarget;
else
#endif
target = &ctarget;
Pdu pdu2 = pdu;
if (( status = snmp.get_bulk( pdu,*target,non_reps,max_reps))== SNMP_CLASS_SUCCESS) {
for ( int z=0;z<pdu.get_vb_count();z++) {
pdu.get_vb( vb,z);
#ifdef _SNMPv3
if (pdu.get_type() == REPORT_MSG) {
Oid tmp;
vb.get_oid(tmp);
cout << "Received a reportPdu: "
<< snmp.error_msg( tmp)
<< endl
<< vb.get_printable_oid() << " = "
<< vb.get_printable_value() << endl;
}
#endif
cout << "Oid = " << vb.get_printable_oid() << "\n";
if ( vb.get_syntax() != sNMP_SYNTAX_ENDOFMIBVIEW) {
cout << "Value = " << vb.get_printable_value() << "\n\n";
}
else {
cout << "End of MIB view.\n\n";
}
}
}
else
cout << "SNMP++ GetBulk Error, " << snmp.error_msg( status) << "\n";
pdu = pdu2;
//--------------------
if (( status = snmp.get_bulk( pdu,*target,non_reps,max_reps))== SNMP_CLASS_SUCCESS) {
for ( int z=0;z<pdu.get_vb_count();z++) {
pdu.get_vb( vb,z);
#ifdef _SNMPv3
if (pdu.get_type() == REPORT_MSG) {
Oid tmp;
vb.get_oid(tmp);
cout << "Received a reportPdu: "
<< snmp.error_msg( tmp)
<< endl
<< vb.get_printable_oid() << " = "
<< vb.get_printable_value() << endl;
}
#endif
cout << "Oid = " << vb.get_printable_oid() << "\n";
if ( vb.get_syntax() != sNMP_SYNTAX_ENDOFMIBVIEW) {
cout << "Value = " << vb.get_printable_value() << "\n\n";
}
else {
cout << "End of MIB view.\n\n";
}
}
}
else
cout << "SNMP++ GetBulk Error, " << snmp.error_msg( status) << "\n";
//-------------
Snmp::socket_cleanup(); // Shut down socket subsystem
}
int main(int argc, char **argv)
{
//---------[ check the arg count ]----------------------------------------
if ( argc < 2) {
cout << "Usage:\n";
cout << "snmpTraps IpAddress | DNSName [Id] [options]\n";
cout << "Id = default is 1.3.6.1.6.3.1.1.5.1 = ColdStart";
cout << "options: -vN , use SNMP version 1, 2 or 3, default is 1\n";
cout << " -PPort , remote port to use\n";
cout << " -CCommunity_name, specify community default is 'public' \n";
#ifdef _SNMPv3
cout << " -snSecurityName, " << endl;
cout << " -slN , securityLevel to use, default N = 3 = authPriv" << endl;
cout << " -smN , securityModel to use, only default N = 3 = USM possible\n";
cout << " -cnContextName, default empty string" << endl;
cout << " -ceContextEngineID, as hex e.g. 800007E580, default empty string" << endl;
cout << " -authPROT, use authentication protocol NONE, SHA or MD5\n";
cout << " -privPROT, use privacy protocol NONE, DES, 3DESEDE, IDEA, AES128, AES192 or AES256\n";
cout << " -uaAuthPassword\n";
cout << " -upPrivPassword\n";
#endif
return 1;
}
Snmp::socket_startup(); // Initialize socket subsystem
//---------[ make a GenAddress and Oid object to retrieve ]---------------
UdpAddress address( argv[1]); // make a SNMP++ Generic address
if ( !address.valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[1] << "\n";
return 1;
}
Oid oid( COLDSTART); // default is ColdStart
if ( argc >= 3) { // if 3 args, then use the callers Oid
if ( strstr( argv[2],"-")==0) {
oid = argv[2];
if ( !oid.valid()) { // check validity of user oid
cout << "Invalid Oid, " << argv[2] << "\n";
return 1;
}
}
}
//---------[ determine options to use ]-----------------------------------
snmp_version version=version1; // default is v1
u_short port=161; // default snmp port is 161
OctetStr community("public"); // community name
Oid ent(ENTERPRISE); // default enterprise
#ifdef _SNMPv3
OctetStr privPassword("");
OctetStr authPassword("");
OctetStr securityName("");
int securityModel = SecurityModel_USM;
int securityLevel = SecurityLevel_authPriv;
OctetStr contextName("");
OctetStr contextEngineID("");
long authProtocol = SNMPv3_usmNoAuthProtocol;
long privProtocol = SNMPv3_usmNoPrivProtocol;
v3MP *v3_MP;
#endif
char *ptr;
for(int x=1; x<argc; x++) { // parse for version
if ( strstr( argv[x],"-v2")!= 0) {
version = version2c;
continue;
}
if ( strstr( argv[x],"-C")!=0) {
ptr = argv[x];
ptr++;
ptr++;
community = ptr;
continue;
}
if ( strstr( argv[x],"-P")!=0) {
ptr = argv[x];
ptr++;
ptr++;
sscanf(ptr, "%hu", &port);
continue;
}
#ifdef _SNMPv3
if ( strstr( argv[x],"-v3")!= 0) {
version = version3;
continue;
}
if ( strstr( argv[x],"-auth") != 0) {
ptr = argv[x];
ptr+=5;
if (strcasecmp(ptr, "SHA") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACSHA;
else if (strcasecmp(ptr, "MD5") == 0)
authProtocol = SNMP_AUTHPROTOCOL_HMACMD5;
else
authProtocol = SNMP_AUTHPROTOCOL_NONE;
continue;
}
if ( strstr( argv[x],"-priv") != 0) {
ptr = argv[x];
ptr+=5;
if (strcasecmp(ptr, "DES") == 0)
privProtocol = SNMP_PRIVPROTOCOL_DES;
else if (strcasecmp(ptr, "3DESEDE") == 0)
privProtocol = SNMP_PRIVPROTOCOL_3DESEDE;
else if (strcasecmp(ptr, "IDEA") == 0)
privProtocol = SNMP_PRIVPROTOCOL_IDEA;
else if (strcasecmp(ptr, "AES128") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES128;
else if (strcasecmp(ptr, "AES192") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES192;
else if (strcasecmp(ptr, "AES256") == 0)
privProtocol = SNMP_PRIVPROTOCOL_AES256;
else
privProtocol = SNMP_PRIVPROTOCOL_NONE;
printf("\n\nPrivProt : %ld\n", privProtocol);
continue;
}
if ( strstr( argv[x],"-sn")!=0) {
ptr = argv[x];
ptr+=3;
securityName = ptr;
continue;
}
if ( strstr( argv[x], "-sl")!=0) {
ptr = argv[x];
ptr+=3;
securityLevel = atoi( ptr);
if (( securityLevel < SecurityLevel_noAuthNoPriv) ||
( securityLevel > SecurityLevel_authPriv))
securityLevel = SecurityLevel_authPriv;
continue;
}
if ( strstr( argv[x], "-sm")!=0) {
ptr = argv[x];
ptr+=3;
securityModel = atoi( ptr);
if (( securityModel < SecurityModel_v1) ||
( securityModel > SecurityModel_USM))
securityModel = SecurityModel_USM;
continue;
}
if ( strstr( argv[x],"-cn")!=0) {
ptr = argv[x];
ptr+=3;
contextName = ptr;
continue;
}
if ( strstr( argv[x],"-ce")!=0) {
ptr = argv[x];
ptr+=3;
contextEngineID = OctetStr::from_hex_string(ptr);
continue;
}
if ( strstr( argv[x],"-ua")!=0) {
ptr = argv[x];
ptr+=3;
authPassword = ptr;
continue;
}
if ( strstr( argv[x],"-up")!=0) {
ptr = argv[x];
ptr+=3;
privPassword = ptr;
continue;
}
#endif
}
//----------[ create a SNMP++ session ]-----------------------------------
int status;
Snmp *snmp;
if (address.get_ip_version() == Address::version_ipv4)
snmp = new Snmp(status, "0.0.0.0");
else
snmp = new Snmp(status, "::");
if ( status != SNMP_CLASS_SUCCESS) {
cout << "SNMP++ Session Create Fail, " << snmp->error_msg(status) << "\n";
return 1;
}
//---------[ init SnmpV3 ]--------------------------------------------
#ifdef _SNMPv3
if (version == version3) {
char *engineId = "TrapSender";
char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
int status;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
cout << "Error loading snmpEngineBoots counter: " << status << endl;
return 1;
}
snmpEngineBoots++;
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
cout << "Error saving snmpEngineBoots counter: " << status << endl;
return 1;
}
int construct_status;
v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
USM *usm = v3_MP->get_usm();
usm->add_usm_user(securityName,
authProtocol, privProtocol,
authPassword, privPassword);
}
else
{
// MUST create a dummy v3MP object if _SNMPv3 is enabled!
int construct_status;
v3_MP = new v3MP("dummy", 0, construct_status);
}
#endif
//--------[ build up SNMP++ object needed ]-------------------------------
Pdu pdu; // construct a Pdu object
Vb vb; // variable binding object to use
vb.set_oid(PAYLOADID); // example oid for trap payload
vb.set_value(PAYLOAD); // example string for payload
pdu += vb; // append the vb to the pdu
pdu.set_notify_id( oid); // set the id of the trap
pdu.set_notify_enterprise( ent); // set up the enterprise of the trap
address.set_port(port);
CTarget ctarget( address); // make a target using the address
#ifdef _SNMPv3
UTarget utarget( address);
if (version == version3) {
utarget.set_version( version); // set the SNMP version SNMPV1 or V2 or V3
utarget.set_security_model( securityModel);
utarget.set_security_name( securityName);
pdu.set_security_level( securityLevel);
pdu.set_context_name (contextName);
pdu.set_context_engine_id(contextEngineID);
}
else {
#endif
ctarget.set_version( version); // set the SNMP version SNMPV1 or V2
ctarget.set_readcommunity( community); // set the read community name
#ifdef _SNMPv3
}
#endif
//-------[ Send the trap ]------------------------------------------------
cout << "SNMP++ Trap to " << argv[1] << " SNMPV"
#ifdef _SNMPv3
<< ((version==version3) ? (version) : (version+1));
#else
<< (version+1);
int main_walkThreads_jun( int argc, char **argv) {
//---------[ check the arg count ]----------------------------------------
if ( argc < 2) {
cout << "Usage:\n";
cout << "snmpWalkThreads host/port [host/port]... [options]\n";
cout << "StartOid: 1\n";
cout << "options: -v1 , use SNMPV1, default\n";
cout << " -v2 , use SNMPV2\n";
#ifdef _SNMPv3
cout << " -v3 , use SNMPV3\n";
#endif
cout << " -pPort , remote port to use\n";
cout << " -CCommunity_name, specify community default is 'public' \n";
cout << " -rN , retries default is N = 1 retry\n";
cout << " -tN , timeout in hundredths of seconds; default is N = 100\n";
#ifdef _SNMPv3
cout << " -snSecurityName, " << endl;
cout << " -slN , securityLevel to use, default N = 3 = authPriv" << endl;
cout << " -smN , securityModel to use, only default N = 3 = USM possible\n";
cout << " -cnContextName, default """"" << endl;
cout << " -ceContextEngineID, default """"" << endl;
cout << " -md5 , use MD5 authentication protocol\n";
cout << " -sha , use SHA authentication protocol\n";
cout << " -des , use DES privacy protocol\n";
cout << " -idea, use IDEA privacy protocol\n";
cout << " -aes128, use AES128 privacy protocol\n";
cout << " -aes192, use AES192 privacy protocol\n";
cout << " -aes256, use AES256 privacy protocol\n";
cout << " -uaAuthPassword\n";
cout << " -upPrivPassword\n";
#endif
return 0;
}
Snmp::socket_startup(); // Initialize socket subsystem
//---------[ make a GenAddress and Oid object to retrieve ]---------------
address[0] = UdpAddress(argv[1]);
if ( !address[0].valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[1] << "\n";
return -1;
}
int x=2;
while ((x<argc) && (x<100) && (strstr(argv[x],"-")==0)) {
address[x-1] = UdpAddress(argv[x]);
if ( !address[x-1].valid()) { // check validity of address
cout << "Invalid Address or DNS Name, " << argv[x] << "\n";
return -1;
}
x++;
}
int threads = x-1;
cout << community.get_printable() << endl;
//---------[ determine options to use ]-----------------------------------
char *ptr;
for(;x<argc;x++) { // parse for version
if ( strstr( argv[x],"-v2")!= 0) {
version = version2c;
continue;
}
if ( strstr( argv[x],"-r")!= 0) { // parse for retries
ptr = argv[x]; ptr++; ptr++;
retries = atoi(ptr);
if (( retries<0)|| (retries>5)) retries=1;
continue;
}
if ( strstr( argv[x], "-t")!=0) { // parse for timeout
ptr = argv[x]; ptr++; ptr++;
timeout = atoi( ptr);
if (( timeout < 100)||( timeout>500)) timeout=100;
continue;
}
if ( strstr( argv[x],"-C")!=0) {
ptr = argv[x]; ptr++; ptr++;
community = ptr;
continue;
}
if ( strstr( argv[x],"-p")!=0) {
ptr = argv[x]; ptr++; ptr++;
sscanf(ptr, "%hu", &port);
continue;
}
#ifdef _SNMPv3
if ( strstr( argv[x],"-v3")!= 0) {
version = version3;
continue;
}
if ( strstr( argv[x],"-idea") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmIDEAPrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes128") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES128PrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes192") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES192PrivProtocol;
continue;
}
if ( strstr( argv[x],"-aes256") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmAES256PrivProtocol;
continue;
}
if ( strstr( argv[x],"-sha") != 0) {
ptr = argv[x]; ptr++; ptr++;
authProtocol = SNMPv3_usmHMACSHAAuthProtocol;
continue;
}
if ( strstr( argv[x],"-des") != 0) {
ptr = argv[x]; ptr++; ptr++;
privProtocol = SNMPv3_usmDESPrivProtocol;
continue;
}
if ( strstr( argv[x],"-md5") != 0) {
ptr = argv[x]; ptr++; ptr++;
authProtocol = SNMPv3_usmHMACMD5AuthProtocol;
continue;
}
if ( strstr( argv[x],"-sn")!=0) {
ptr = argv[x]; ptr+=3;
securityName = ptr;
continue;
}
if ( strstr( argv[x], "-sl")!=0) {
ptr = argv[x]; ptr+=3;
securityLevel = atoi( ptr);
if (( securityLevel < SecurityLevel_noAuthNoPriv) ||
( securityLevel > SecurityLevel_authPriv))
securityLevel = SecurityLevel_authPriv;
continue;
}
if ( strstr( argv[x], "-sm")!=0) {
ptr = argv[x]; ptr+=3;
securityModel = atoi( ptr);
if (( securityModel < SecurityModel_v1) ||
( securityModel > SecurityModel_USM))
securityModel = SecurityModel_USM;
continue;
}
if ( strstr( argv[x],"-cn")!=0) {
ptr = argv[x]; ptr+=3;
contextName = ptr;
continue;
}
if ( strstr( argv[x],"-ce")!=0) {
ptr = argv[x]; ptr+=3;
contextEngineID = ptr;
continue;
}
if ( strstr( argv[x],"-ua")!=0) {
ptr = argv[x]; ptr+=3;
authPassword = ptr;
continue;
}
if ( strstr( argv[x],"-up")!=0) {
ptr = argv[x]; ptr+=3;
privPassword = ptr;
continue;
}
#endif
}
//----------[ create a SNMP++ session ]-----------------------------------
int status;
// bind to any port and use IPv6 if enabled
#ifdef SNMP_PP_IPv6
snmp = new Snmp(status, 0, true);
#else
snmp = new Snmp(status);
#endif
if ( status != SNMP_CLASS_SUCCESS) {
cout << "SNMP++ Session Create Fail, "
<< snmp->error_msg(status) << "\n";
return -3;
}
#ifdef _SNMPv3
//---------[ init SnmpV3 ]--------------------------------------------
v3MP *v3_MP;
if (version == version3) {
char *engineId = "snmpWalk";
char *filename = "snmpv3_boot_counter";
unsigned int snmpEngineBoots = 0;
int status;
status = getBootCounter(filename, engineId, snmpEngineBoots);
if ((status != SNMPv3_OK) && (status < SNMPv3_FILEOPEN_ERROR))
{
cout << "Error loading snmpEngineBoots counter: " << status << endl;
return 1;
}
snmpEngineBoots++;
status = saveBootCounter(filename, engineId, snmpEngineBoots);
if (status != SNMPv3_OK)
{
cout << "Error saving snmpEngineBoots counter: " << status << endl;
return 1;
}
int construct_status;
v3_MP = new v3MP(engineId, snmpEngineBoots, construct_status);
USM *usm = v3_MP->get_usm();
usm->add_usm_user(securityName,
authProtocol, privProtocol,
authPassword, privPassword);
}
else
{
// MUST create a dummy v3MP object if _SNMPv3 is enabled!
int construct_status;
v3_MP = new v3MP("dummy", 0, construct_status);
}
#endif
#ifdef _THREADS
pthread_t thread[100];
int started = threads;
#endif
while (threads) {
#ifdef _THREADS
if (!attr) {
attr = new pthread_attr_t;
pthread_attr_init(attr);
pthread_attr_setdetachstate(attr, PTHREAD_CREATE_JOINABLE);
}
pthread_create(&thread[threads-1], 0,
&runable,
(void*)new int(threads-1));
#else
int n = threads - 1;
runable(&n);
#endif
threads--;
}
#ifdef _THREADS
// wait for threads to terminate
for (int i=0; i<started; i++) {
cout << "JOINING THREAD " << i << endl;
pthread_join(thread[i], 0);
}
#endif
cout << "END" << endl;
Snmp::socket_cleanup(); // Shut down socket subsystem
}
