Пример #1
0
void MachineVerifier::verifyLiveIntervals() {
  assert(LiveInts && "Don't call verifyLiveIntervals without LiveInts");
  for (LiveIntervals::const_iterator LVI = LiveInts->begin(),
       LVE = LiveInts->end(); LVI != LVE; ++LVI) {
    const LiveInterval &LI = *LVI->second;
    assert(LVI->first == LI.reg && "Invalid reg to interval mapping");

    for (LiveInterval::const_vni_iterator I = LI.vni_begin(), E = LI.vni_end();
         I!=E; ++I) {
      VNInfo *VNI = *I;
      const LiveRange *DefLR = LI.getLiveRangeContaining(VNI->def);

      if (!DefLR) {
        if (!VNI->isUnused()) {
          report("Valno not live at def and not marked unused", MF);
          *OS << "Valno #" << VNI->id << " in " << LI << '\n';
        }
        continue;
      }

      if (VNI->isUnused())
        continue;

      if (DefLR->valno != VNI) {
        report("Live range at def has different valno", MF);
        DefLR->print(*OS);
        *OS << " should use valno #" << VNI->id << " in " << LI << '\n';
      }

    }

    for (LiveInterval::const_iterator I = LI.begin(), E = LI.end(); I!=E; ++I) {
      const LiveRange &LR = *I;
      assert(LR.valno && "Live range has no valno");

      if (LR.valno->id >= LI.getNumValNums() ||
          LR.valno != LI.getValNumInfo(LR.valno->id)) {
        report("Foreign valno in live range", MF);
        LR.print(*OS);
        *OS << " has a valno not in " << LI << '\n';
      }

      if (LR.valno->isUnused()) {
        report("Live range valno is marked unused", MF);
        LR.print(*OS);
        *OS << " in " << LI << '\n';
      }

    }
  }
}
Пример #2
0
/// analyzeSiblingValues - Trace values defined by sibling copies back to
/// something that isn't a sibling copy.
///
/// Keep track of values that may be rematerializable.
void InlineSpiller::analyzeSiblingValues() {
  SibValues.clear();

  // No siblings at all?
  if (Edit->getReg() == Original)
    return;

  LiveInterval &OrigLI = LIS.getInterval(Original);
  for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
    unsigned Reg = RegsToSpill[i];
    LiveInterval &LI = LIS.getInterval(Reg);
    for (LiveInterval::const_vni_iterator VI = LI.vni_begin(),
         VE = LI.vni_end(); VI != VE; ++VI) {
      VNInfo *VNI = *VI;
      if (VNI->isUnused())
        continue;
      MachineInstr *DefMI = 0;
      if (!VNI->isPHIDef()) {
       DefMI = LIS.getInstructionFromIndex(VNI->def);
       assert(DefMI && "No defining instruction");
      }
      // Check possible sibling copies.
      if (VNI->isPHIDef() || DefMI->isCopy()) {
        VNInfo *OrigVNI = OrigLI.getVNInfoAt(VNI->def);
        assert(OrigVNI && "Def outside original live range");
        if (OrigVNI->def != VNI->def)
          DefMI = traceSiblingValue(Reg, VNI, OrigVNI);
      }
      if (DefMI && Edit->checkRematerializable(VNI, DefMI, AA)) {
        DEBUG(dbgs() << "Value " << PrintReg(Reg) << ':' << VNI->id << '@'
                     << VNI->def << " may remat from " << *DefMI);
      }
    }
  }
}
Пример #3
0
/// RenumberValues - Renumber all values in order of appearance and delete the
/// remaining unused values.
void LiveInterval::RenumberValues(LiveIntervals &lis) {
  SmallPtrSet<VNInfo*, 8> Seen;
  bool seenPHIDef = false;
  valnos.clear();
  for (const_iterator I = begin(), E = end(); I != E; ++I) {
    VNInfo *VNI = I->valno;
    if (!Seen.insert(VNI))
      continue;
    assert(!VNI->isUnused() && "Unused valno used by live range");
    VNI->id = (unsigned)valnos.size();
    valnos.push_back(VNI);
    VNI->setHasPHIKill(false);
    if (VNI->isPHIDef())
      seenPHIDef = true;
  }

  // Recompute phi kill flags.
  if (!seenPHIDef)
    return;
  for (const_vni_iterator I = vni_begin(), E = vni_end(); I != E; ++I) {
    VNInfo *VNI = *I;
    if (!VNI->isPHIDef())
      continue;
    const MachineBasicBlock *PHIBB = lis.getMBBFromIndex(VNI->def);
    assert(PHIBB && "No basic block for phi-def");
    for (MachineBasicBlock::const_pred_iterator PI = PHIBB->pred_begin(),
         PE = PHIBB->pred_end(); PI != PE; ++PI) {
      VNInfo *KVNI = getVNInfoAt(lis.getMBBEndIdx(*PI).getPrevSlot());
      if (KVNI)
        KVNI->setHasPHIKill(true);
    }
  }
}
/// RenumberValues - Renumber all values in order of appearance and delete the
/// remaining unused values.
void LiveRange::RenumberValues() {
  SmallPtrSet<VNInfo*, 8> Seen;
  valnos.clear();
  for (const_iterator I = begin(), E = end(); I != E; ++I) {
    VNInfo *VNI = I->valno;
    if (!Seen.insert(VNI))
      continue;
    assert(!VNI->isUnused() && "Unused valno used by live segment");
    VNI->id = (unsigned)valnos.size();
    valnos.push_back(VNI);
  }
}
Пример #5
0
/// RenumberValues - Renumber all values in order of appearance and delete the
/// remaining unused values.
void LiveRange::RenumberValues() {
  SmallPtrSet<VNInfo*, 8> Seen;
  valnos.clear();
  for (const Segment &S : segments) {
    VNInfo *VNI = S.valno;
    if (!Seen.insert(VNI).second)
      continue;
    assert(!VNI->isUnused() && "Unused valno used by live segment");
    VNI->id = (unsigned)valnos.size();
    valnos.push_back(VNI);
  }
}
void LiveRangeEdit::scanRemattable(AliasAnalysis *aa) {
  for (LiveInterval::vni_iterator I = getParent().vni_begin(),
       E = getParent().vni_end(); I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->isUnused())
      continue;
    MachineInstr *DefMI = LIS.getInstructionFromIndex(VNI->def);
    if (!DefMI)
      continue;
    checkRematerializable(VNI, DefMI, aa);
  }
  ScannedRemattable = true;
}
Пример #7
0
void LiveRangeEdit::scanRemattable(LiveIntervals &lis,
                                   const TargetInstrInfo &tii,
                                   AliasAnalysis *aa) {
  for (LiveInterval::vni_iterator I = parent_.vni_begin(),
       E = parent_.vni_end(); I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->isUnused())
      continue;
    MachineInstr *DefMI = lis.getInstructionFromIndex(VNI->def);
    if (!DefMI)
      continue;
    checkRematerializable(VNI, DefMI, tii, aa);
  }
  scannedRemattable_ = true;
}
Пример #8
0
/// reMaterializeAll - Try to rematerialize as many uses as possible,
/// and trim the live ranges after.
void InlineSpiller::reMaterializeAll() {
  // analyzeSiblingValues has already tested all relevant defining instructions.
  if (!Edit->anyRematerializable(AA))
    return;

  UsedValues.clear();

  // Try to remat before all uses of snippets.
  bool anyRemat = false;
  for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
    unsigned Reg = RegsToSpill[i];
    LiveInterval &LI = LIS.getInterval(Reg);
    for (MachineRegisterInfo::use_nodbg_iterator
         RI = MRI.use_nodbg_begin(Reg);
         MachineInstr *MI = RI.skipBundle();)
      anyRemat |= reMaterializeFor(LI, MI);
  }
  if (!anyRemat)
    return;

  // Remove any values that were completely rematted.
  for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
    unsigned Reg = RegsToSpill[i];
    LiveInterval &LI = LIS.getInterval(Reg);
    for (LiveInterval::vni_iterator I = LI.vni_begin(), E = LI.vni_end();
         I != E; ++I) {
      VNInfo *VNI = *I;
      if (VNI->isUnused() || VNI->isPHIDef() || UsedValues.count(VNI))
        continue;
      MachineInstr *MI = LIS.getInstructionFromIndex(VNI->def);
      MI->addRegisterDead(Reg, &TRI);
      if (!MI->allDefsAreDead())
        continue;
      DEBUG(dbgs() << "All defs dead: " << *MI);
      DeadDefs.push_back(MI);
    }
  }

  // Eliminate dead code after remat. Note that some snippet copies may be
  // deleted here.
  if (DeadDefs.empty())
    return;
  DEBUG(dbgs() << "Remat created " << DeadDefs.size() << " dead defs.\n");
  Edit->eliminateDeadDefs(DeadDefs, RegsToSpill);

  // Get rid of deleted and empty intervals.
  unsigned ResultPos = 0;
  for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
    unsigned Reg = RegsToSpill[i];
    if (!LIS.hasInterval(Reg))
      continue;

    LiveInterval &LI = LIS.getInterval(Reg);
    if (LI.empty()) {
      Edit->eraseVirtReg(Reg);
      continue;
    }

    RegsToSpill[ResultPos++] = Reg;
  }
  RegsToSpill.erase(RegsToSpill.begin() + ResultPos, RegsToSpill.end());
  DEBUG(dbgs() << RegsToSpill.size() << " registers to spill after remat.\n");
}
void MachineVerifier::verifyLiveIntervals() {
  assert(LiveInts && "Don't call verifyLiveIntervals without LiveInts");
  for (LiveIntervals::const_iterator LVI = LiveInts->begin(),
       LVE = LiveInts->end(); LVI != LVE; ++LVI) {
    const LiveInterval &LI = *LVI->second;

    // Spilling and splitting may leave unused registers around. Skip them.
    if (MRI->use_empty(LI.reg))
      continue;

    // Physical registers have much weirdness going on, mostly from coalescing.
    // We should probably fix it, but for now just ignore them.
    if (TargetRegisterInfo::isPhysicalRegister(LI.reg))
      continue;

    assert(LVI->first == LI.reg && "Invalid reg to interval mapping");

    for (LiveInterval::const_vni_iterator I = LI.vni_begin(), E = LI.vni_end();
         I!=E; ++I) {
      VNInfo *VNI = *I;
      const VNInfo *DefVNI = LI.getVNInfoAt(VNI->def);

      if (!DefVNI) {
        if (!VNI->isUnused()) {
          report("Valno not live at def and not marked unused", MF);
          *OS << "Valno #" << VNI->id << " in " << LI << '\n';
        }
        continue;
      }

      if (VNI->isUnused())
        continue;

      if (DefVNI != VNI) {
        report("Live range at def has different valno", MF);
        *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
            << " where valno #" << DefVNI->id << " is live in " << LI << '\n';
        continue;
      }

      const MachineBasicBlock *MBB = LiveInts->getMBBFromIndex(VNI->def);
      if (!MBB) {
        report("Invalid definition index", MF);
        *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
            << " in " << LI << '\n';
        continue;
      }

      if (VNI->isPHIDef()) {
        if (VNI->def != LiveInts->getMBBStartIdx(MBB)) {
          report("PHIDef value is not defined at MBB start", MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << ", not at the beginning of BB#" << MBB->getNumber()
              << " in " << LI << '\n';
        }
      } else {
        // Non-PHI def.
        const MachineInstr *MI = LiveInts->getInstructionFromIndex(VNI->def);
        if (!MI) {
          report("No instruction at def index", MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << " in " << LI << '\n';
        } else if (!MI->modifiesRegister(LI.reg, TRI)) {
          report("Defining instruction does not modify register", MI);
          *OS << "Valno #" << VNI->id << " in " << LI << '\n';
        }

        bool isEarlyClobber = false;
        if (MI) {
          for (MachineInstr::const_mop_iterator MOI = MI->operands_begin(),
               MOE = MI->operands_end(); MOI != MOE; ++MOI) {
            if (MOI->isReg() && MOI->getReg() == LI.reg && MOI->isDef() &&
                MOI->isEarlyClobber()) {
              isEarlyClobber = true;
              break;
            }
          }
        }

        // Early clobber defs begin at USE slots, but other defs must begin at
        // DEF slots.
        if (isEarlyClobber) {
          if (!VNI->def.isUse()) {
            report("Early clobber def must be at a USE slot", MF);
            *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
                << " in " << LI << '\n';
          }
        } else if (!VNI->def.isDef()) {
          report("Non-PHI, non-early clobber def must be at a DEF slot", MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << " in " << LI << '\n';
        }
      }
    }

    for (LiveInterval::const_iterator I = LI.begin(), E = LI.end(); I!=E; ++I) {
      const VNInfo *VNI = I->valno;
      assert(VNI && "Live range has no valno");

      if (VNI->id >= LI.getNumValNums() || VNI != LI.getValNumInfo(VNI->id)) {
        report("Foreign valno in live range", MF);
        I->print(*OS);
        *OS << " has a valno not in " << LI << '\n';
      }

      if (VNI->isUnused()) {
        report("Live range valno is marked unused", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
      }

      const MachineBasicBlock *MBB = LiveInts->getMBBFromIndex(I->start);
      if (!MBB) {
        report("Bad start of live segment, no basic block", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
        continue;
      }
      SlotIndex MBBStartIdx = LiveInts->getMBBStartIdx(MBB);
      if (I->start != MBBStartIdx && I->start != VNI->def) {
        report("Live segment must begin at MBB entry or valno def", MBB);
        I->print(*OS);
        *OS << " in " << LI << '\n' << "Basic block starts at "
            << MBBStartIdx << '\n';
      }

      const MachineBasicBlock *EndMBB =
                                LiveInts->getMBBFromIndex(I->end.getPrevSlot());
      if (!EndMBB) {
        report("Bad end of live segment, no basic block", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
        continue;
      }
      if (I->end != LiveInts->getMBBEndIdx(EndMBB)) {
        // The live segment is ending inside EndMBB
        const MachineInstr *MI =
                        LiveInts->getInstructionFromIndex(I->end.getPrevSlot());
        if (!MI) {
          report("Live segment doesn't end at a valid instruction", EndMBB);
        I->print(*OS);
        *OS << " in " << LI << '\n' << "Basic block starts at "
            << MBBStartIdx << '\n';
        } else if (TargetRegisterInfo::isVirtualRegister(LI.reg) &&
                   !MI->readsVirtualRegister(LI.reg)) {
          // A live range can end with either a redefinition, a kill flag on a
          // use, or a dead flag on a def.
          // FIXME: Should we check for each of these?
          bool hasDeadDef = false;
          for (MachineInstr::const_mop_iterator MOI = MI->operands_begin(),
               MOE = MI->operands_end(); MOI != MOE; ++MOI) {
            if (MOI->isReg() && MOI->getReg() == LI.reg && MOI->isDef() && MOI->isDead()) {
              hasDeadDef = true;
              break;
            }
          }

          if (!hasDeadDef) {
            report("Instruction killing live segment neither defines nor reads "
                   "register", MI);
            I->print(*OS);
            *OS << " in " << LI << '\n';
          }
        }
      }

      // Now check all the basic blocks in this live segment.
      MachineFunction::const_iterator MFI = MBB;
      // Is this live range the beginning of a non-PHIDef VN?
      if (I->start == VNI->def && !VNI->isPHIDef()) {
        // Not live-in to any blocks.
        if (MBB == EndMBB)
          continue;
        // Skip this block.
        ++MFI;
      }
      for (;;) {
        assert(LiveInts->isLiveInToMBB(LI, MFI));
        // We don't know how to track physregs into a landing pad.
        if (TargetRegisterInfo::isPhysicalRegister(LI.reg) &&
            MFI->isLandingPad()) {
          if (&*MFI == EndMBB)
            break;
          ++MFI;
          continue;
        }
        // Check that VNI is live-out of all predecessors.
        for (MachineBasicBlock::const_pred_iterator PI = MFI->pred_begin(),
             PE = MFI->pred_end(); PI != PE; ++PI) {
          SlotIndex PEnd = LiveInts->getMBBEndIdx(*PI).getPrevSlot();
          const VNInfo *PVNI = LI.getVNInfoAt(PEnd);

          if (VNI->isPHIDef() && VNI->def == LiveInts->getMBBStartIdx(MFI))
            continue;

          if (!PVNI) {
            report("Register not marked live out of predecessor", *PI);
            *OS << "Valno #" << VNI->id << " live into BB#" << MFI->getNumber()
                << '@' << LiveInts->getMBBStartIdx(MFI) << ", not live at "
                << PEnd << " in " << LI << '\n';
            continue;
          }

          if (PVNI != VNI) {
            report("Different value live out of predecessor", *PI);
            *OS << "Valno #" << PVNI->id << " live out of BB#"
                << (*PI)->getNumber() << '@' << PEnd
                << "\nValno #" << VNI->id << " live into BB#" << MFI->getNumber()
                << '@' << LiveInts->getMBBStartIdx(MFI) << " in " << LI << '\n';
          }
        }
        if (&*MFI == EndMBB)
          break;
        ++MFI;
      }
    }

    // Check the LI only has one connected component.
    if (TargetRegisterInfo::isVirtualRegister(LI.reg)) {
      ConnectedVNInfoEqClasses ConEQ(*LiveInts);
      unsigned NumComp = ConEQ.Classify(&LI);
      if (NumComp > 1) {
        report("Multiple connected components in live interval", MF);
        *OS << NumComp << " components in " << LI << '\n';
        for (unsigned comp = 0; comp != NumComp; ++comp) {
          *OS << comp << ": valnos";
          for (LiveInterval::const_vni_iterator I = LI.vni_begin(),
               E = LI.vni_end(); I!=E; ++I)
            if (comp == ConEQ.getEqClass(*I))
              *OS << ' ' << (*I)->id;
          *OS << '\n';
        }
      }
    }
  }
}
Пример #10
0
/// shrinkToUses - After removing some uses of a register, shrink its live
/// range to just the remaining uses. This method does not compute reaching
/// defs for new uses, and it doesn't remove dead defs.
bool LiveIntervals::shrinkToUses(LiveInterval *li,
                                 SmallVectorImpl<MachineInstr*> *dead) {
  DEBUG(dbgs() << "Shrink: " << *li << '\n');
  assert(TargetRegisterInfo::isVirtualRegister(li->reg)
         && "Can only shrink virtual registers");
  // Find all the values used, including PHI kills.
  SmallVector<std::pair<SlotIndex, VNInfo*>, 16> WorkList;

  // Blocks that have already been added to WorkList as live-out.
  SmallPtrSet<MachineBasicBlock*, 16> LiveOut;

  // Visit all instructions reading li->reg.
  for (MachineRegisterInfo::reg_iterator I = MRI->reg_begin(li->reg);
       MachineInstr *UseMI = I.skipInstruction();) {
    if (UseMI->isDebugValue() || !UseMI->readsVirtualRegister(li->reg))
      continue;
    SlotIndex Idx = getInstructionIndex(UseMI).getRegSlot();
    LiveRangeQuery LRQ(*li, Idx);
    VNInfo *VNI = LRQ.valueIn();
    if (!VNI) {
      // This shouldn't happen: readsVirtualRegister returns true, but there is
      // no live value. It is likely caused by a target getting <undef> flags
      // wrong.
      DEBUG(dbgs() << Idx << '\t' << *UseMI
                   << "Warning: Instr claims to read non-existent value in "
                    << *li << '\n');
      continue;
    }
    // Special case: An early-clobber tied operand reads and writes the
    // register one slot early.
    if (VNInfo *DefVNI = LRQ.valueDefined())
      Idx = DefVNI->def;

    WorkList.push_back(std::make_pair(Idx, VNI));
  }

  // Create a new live interval with only minimal live segments per def.
  LiveInterval NewLI(li->reg, 0);
  for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
       I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->isUnused())
      continue;
    NewLI.addRange(LiveRange(VNI->def, VNI->def.getDeadSlot(), VNI));
  }

  // Keep track of the PHIs that are in use.
  SmallPtrSet<VNInfo*, 8> UsedPHIs;

  // Extend intervals to reach all uses in WorkList.
  while (!WorkList.empty()) {
    SlotIndex Idx = WorkList.back().first;
    VNInfo *VNI = WorkList.back().second;
    WorkList.pop_back();
    const MachineBasicBlock *MBB = getMBBFromIndex(Idx.getPrevSlot());
    SlotIndex BlockStart = getMBBStartIdx(MBB);

    // Extend the live range for VNI to be live at Idx.
    if (VNInfo *ExtVNI = NewLI.extendInBlock(BlockStart, Idx)) {
      (void)ExtVNI;
      assert(ExtVNI == VNI && "Unexpected existing value number");
      // Is this a PHIDef we haven't seen before?
      if (!VNI->isPHIDef() || VNI->def != BlockStart || !UsedPHIs.insert(VNI))
        continue;
      // The PHI is live, make sure the predecessors are live-out.
      for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
           PE = MBB->pred_end(); PI != PE; ++PI) {
        if (!LiveOut.insert(*PI))
          continue;
        SlotIndex Stop = getMBBEndIdx(*PI);
        // A predecessor is not required to have a live-out value for a PHI.
        if (VNInfo *PVNI = li->getVNInfoBefore(Stop))
          WorkList.push_back(std::make_pair(Stop, PVNI));
      }
      continue;
    }

    // VNI is live-in to MBB.
    DEBUG(dbgs() << " live-in at " << BlockStart << '\n');
    NewLI.addRange(LiveRange(BlockStart, Idx, VNI));

    // Make sure VNI is live-out from the predecessors.
    for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
         PE = MBB->pred_end(); PI != PE; ++PI) {
      if (!LiveOut.insert(*PI))
        continue;
      SlotIndex Stop = getMBBEndIdx(*PI);
      assert(li->getVNInfoBefore(Stop) == VNI &&
             "Wrong value out of predecessor");
      WorkList.push_back(std::make_pair(Stop, VNI));
    }
  }

  // Handle dead values.
  bool CanSeparate = false;
  for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
       I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->isUnused())
      continue;
    LiveInterval::iterator LII = NewLI.FindLiveRangeContaining(VNI->def);
    assert(LII != NewLI.end() && "Missing live range for PHI");
    if (LII->end != VNI->def.getDeadSlot())
      continue;
    if (VNI->isPHIDef()) {
      // This is a dead PHI. Remove it.
      VNI->markUnused();
      NewLI.removeRange(*LII);
      DEBUG(dbgs() << "Dead PHI at " << VNI->def << " may separate interval\n");
      CanSeparate = true;
    } else {
      // This is a dead def. Make sure the instruction knows.
      MachineInstr *MI = getInstructionFromIndex(VNI->def);
      assert(MI && "No instruction defining live value");
      MI->addRegisterDead(li->reg, TRI);
      if (dead && MI->allDefsAreDead()) {
        DEBUG(dbgs() << "All defs dead: " << VNI->def << '\t' << *MI);
        dead->push_back(MI);
      }
    }
  }

  // Move the trimmed ranges back.
  li->ranges.swap(NewLI.ranges);
  DEBUG(dbgs() << "Shrunk: " << *li << '\n');
  return CanSeparate;
}
Пример #11
0
void MachineVerifier::verifyLiveIntervals() {
  assert(LiveInts && "Don't call verifyLiveIntervals without LiveInts");
  for (unsigned i = 0, e = MRI->getNumVirtRegs(); i != e; ++i) {
    unsigned Reg = TargetRegisterInfo::index2VirtReg(i);

    // Spilling and splitting may leave unused registers around. Skip them.
    if (MRI->reg_nodbg_empty(Reg))
      continue;

    if (!LiveInts->hasInterval(Reg)) {
      report("Missing live interval for virtual register", MF);
      *OS << PrintReg(Reg, TRI) << " still has defs or uses\n";
      continue;
    }

    const LiveInterval &LI = LiveInts->getInterval(Reg);
    assert(Reg == LI.reg && "Invalid reg to interval mapping");

    for (LiveInterval::const_vni_iterator I = LI.vni_begin(), E = LI.vni_end();
         I!=E; ++I) {
      VNInfo *VNI = *I;
      const VNInfo *DefVNI = LI.getVNInfoAt(VNI->def);

      if (!DefVNI) {
        if (!VNI->isUnused()) {
          report("Valno not live at def and not marked unused", MF);
          *OS << "Valno #" << VNI->id << " in " << LI << '\n';
        }
        continue;
      }

      if (VNI->isUnused())
        continue;

      if (DefVNI != VNI) {
        report("Live range at def has different valno", MF);
        *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
            << " where valno #" << DefVNI->id << " is live in " << LI << '\n';
        continue;
      }

      const MachineBasicBlock *MBB = LiveInts->getMBBFromIndex(VNI->def);
      if (!MBB) {
        report("Invalid definition index", MF);
        *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
            << " in " << LI << '\n';
        continue;
      }

      if (VNI->isPHIDef()) {
        if (VNI->def != LiveInts->getMBBStartIdx(MBB)) {
          report("PHIDef value is not defined at MBB start", MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << ", not at the beginning of BB#" << MBB->getNumber()
              << " in " << LI << '\n';
        }
      } else {
        // Non-PHI def.
        const MachineInstr *MI = LiveInts->getInstructionFromIndex(VNI->def);
        if (!MI) {
          report("No instruction at def index", MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << " in " << LI << '\n';
          continue;
        }

        bool hasDef = false;
        bool isEarlyClobber = false;
        for (ConstMIBundleOperands MOI(MI); MOI.isValid(); ++MOI) {
          if (!MOI->isReg() || !MOI->isDef())
            continue;
          if (TargetRegisterInfo::isVirtualRegister(LI.reg)) {
            if (MOI->getReg() != LI.reg)
              continue;
          } else {
            if (!TargetRegisterInfo::isPhysicalRegister(MOI->getReg()) ||
                !TRI->regsOverlap(LI.reg, MOI->getReg()))
              continue;
          }
          hasDef = true;
          if (MOI->isEarlyClobber())
            isEarlyClobber = true;
        }

        if (!hasDef) {
          report("Defining instruction does not modify register", MI);
          *OS << "Valno #" << VNI->id << " in " << LI << '\n';
        }

        // Early clobber defs begin at USE slots, but other defs must begin at
        // DEF slots.
        if (isEarlyClobber) {
          if (!VNI->def.isEarlyClobber()) {
            report("Early clobber def must be at an early-clobber slot", MF);
            *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
                << " in " << LI << '\n';
          }
        } else if (!VNI->def.isRegister()) {
          report("Non-PHI, non-early clobber def must be at a register slot",
                 MF);
          *OS << "Valno #" << VNI->id << " is defined at " << VNI->def
              << " in " << LI << '\n';
        }
      }
    }

    for (LiveInterval::const_iterator I = LI.begin(), E = LI.end(); I!=E; ++I) {
      const VNInfo *VNI = I->valno;
      assert(VNI && "Live range has no valno");

      if (VNI->id >= LI.getNumValNums() || VNI != LI.getValNumInfo(VNI->id)) {
        report("Foreign valno in live range", MF);
        I->print(*OS);
        *OS << " has a valno not in " << LI << '\n';
      }

      if (VNI->isUnused()) {
        report("Live range valno is marked unused", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
      }

      const MachineBasicBlock *MBB = LiveInts->getMBBFromIndex(I->start);
      if (!MBB) {
        report("Bad start of live segment, no basic block", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
        continue;
      }
      SlotIndex MBBStartIdx = LiveInts->getMBBStartIdx(MBB);
      if (I->start != MBBStartIdx && I->start != VNI->def) {
        report("Live segment must begin at MBB entry or valno def", MBB);
        I->print(*OS);
        *OS << " in " << LI << '\n' << "Basic block starts at "
            << MBBStartIdx << '\n';
      }

      const MachineBasicBlock *EndMBB =
                                LiveInts->getMBBFromIndex(I->end.getPrevSlot());
      if (!EndMBB) {
        report("Bad end of live segment, no basic block", MF);
        I->print(*OS);
        *OS << " in " << LI << '\n';
        continue;
      }

      // No more checks for live-out segments.
      if (I->end == LiveInts->getMBBEndIdx(EndMBB))
        continue;

      // The live segment is ending inside EndMBB
      const MachineInstr *MI =
        LiveInts->getInstructionFromIndex(I->end.getPrevSlot());
      if (!MI) {
        report("Live segment doesn't end at a valid instruction", EndMBB);
        I->print(*OS);
        *OS << " in " << LI << '\n' << "Basic block starts at "
          << MBBStartIdx << '\n';
        continue;
      }

      // The block slot must refer to a basic block boundary.
      if (I->end.isBlock()) {
        report("Live segment ends at B slot of an instruction", MI);
        I->print(*OS);
        *OS << " in " << LI << '\n';
      }

      if (I->end.isDead()) {
        // Segment ends on the dead slot.
        // That means there must be a dead def.
        if (!SlotIndex::isSameInstr(I->start, I->end)) {
          report("Live segment ending at dead slot spans instructions", MI);
          I->print(*OS);
          *OS << " in " << LI << '\n';
        }
      }

      // A live segment can only end at an early-clobber slot if it is being
      // redefined by an early-clobber def.
      if (I->end.isEarlyClobber()) {
        if (I+1 == E || (I+1)->start != I->end) {
          report("Live segment ending at early clobber slot must be "
                 "redefined by an EC def in the same instruction", MI);
          I->print(*OS);
          *OS << " in " << LI << '\n';
        }
      }

      // The following checks only apply to virtual registers. Physreg liveness
      // is too weird to check.
      if (TargetRegisterInfo::isVirtualRegister(LI.reg)) {
        // A live range can end with either a redefinition, a kill flag on a
        // use, or a dead flag on a def.
        bool hasRead = false;
        bool hasDeadDef = false;
        for (ConstMIBundleOperands MOI(MI); MOI.isValid(); ++MOI) {
          if (!MOI->isReg() || MOI->getReg() != LI.reg)
            continue;
          if (MOI->readsReg())
            hasRead = true;
          if (MOI->isDef() && MOI->isDead())
            hasDeadDef = true;
        }

        if (I->end.isDead()) {
          if (!hasDeadDef) {
            report("Instruction doesn't have a dead def operand", MI);
            I->print(*OS);
            *OS << " in " << LI << '\n';
          }
        } else {
          if (!hasRead) {
            report("Instruction ending live range doesn't read the register",
                   MI);
            I->print(*OS);
            *OS << " in " << LI << '\n';
          }
        }
      }

      // Now check all the basic blocks in this live segment.
      MachineFunction::const_iterator MFI = MBB;
      // Is this live range the beginning of a non-PHIDef VN?
      if (I->start == VNI->def && !VNI->isPHIDef()) {
        // Not live-in to any blocks.
        if (MBB == EndMBB)
          continue;
        // Skip this block.
        ++MFI;
      }
      for (;;) {
        assert(LiveInts->isLiveInToMBB(LI, MFI));
        // We don't know how to track physregs into a landing pad.
        if (TargetRegisterInfo::isPhysicalRegister(LI.reg) &&
            MFI->isLandingPad()) {
          if (&*MFI == EndMBB)
            break;
          ++MFI;
          continue;
        }

        // Is VNI a PHI-def in the current block?
        bool IsPHI = VNI->isPHIDef() &&
                     VNI->def == LiveInts->getMBBStartIdx(MFI);

        // Check that VNI is live-out of all predecessors.
        for (MachineBasicBlock::const_pred_iterator PI = MFI->pred_begin(),
             PE = MFI->pred_end(); PI != PE; ++PI) {
          SlotIndex PEnd = LiveInts->getMBBEndIdx(*PI);
          const VNInfo *PVNI = LI.getVNInfoBefore(PEnd);

          // All predecessors must have a live-out value.
          if (!PVNI) {
            report("Register not marked live out of predecessor", *PI);
            *OS << "Valno #" << VNI->id << " live into BB#" << MFI->getNumber()
                << '@' << LiveInts->getMBBStartIdx(MFI) << ", not live before "
                << PEnd << " in " << LI << '\n';
            continue;
          }

          // Only PHI-defs can take different predecessor values.
          if (!IsPHI && PVNI != VNI) {
            report("Different value live out of predecessor", *PI);
            *OS << "Valno #" << PVNI->id << " live out of BB#"
                << (*PI)->getNumber() << '@' << PEnd
                << "\nValno #" << VNI->id << " live into BB#" << MFI->getNumber()
                << '@' << LiveInts->getMBBStartIdx(MFI) << " in "
                << PrintReg(Reg) << ": " << LI << '\n';
          }
        }
        if (&*MFI == EndMBB)
          break;
        ++MFI;
      }
    }

    // Check the LI only has one connected component.
    if (TargetRegisterInfo::isVirtualRegister(LI.reg)) {
      ConnectedVNInfoEqClasses ConEQ(*LiveInts);
      unsigned NumComp = ConEQ.Classify(&LI);
      if (NumComp > 1) {
        report("Multiple connected components in live interval", MF);
        *OS << NumComp << " components in " << LI << '\n';
        for (unsigned comp = 0; comp != NumComp; ++comp) {
          *OS << comp << ": valnos";
          for (LiveInterval::const_vni_iterator I = LI.vni_begin(),
               E = LI.vni_end(); I!=E; ++I)
            if (comp == ConEQ.getEqClass(*I))
              *OS << ' ' << (*I)->id;
          *OS << '\n';
        }
      }
    }
  }
}
Пример #12
0
/// reMaterializeAll - Try to rematerialize as many uses of li_ as possible,
/// and trim the live ranges after.
void InlineSpiller::reMaterializeAll() {
  // Do a quick scan of the interval values to find if any are remattable.
  reMattable_.clear();
  usedValues_.clear();
  for (LiveInterval::const_vni_iterator I = li_->vni_begin(),
       E = li_->vni_end(); I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->isUnused() || !VNI->isDefAccurate())
      continue;
    MachineInstr *DefMI = lis_.getInstructionFromIndex(VNI->def);
    if (!DefMI || !tii_.isTriviallyReMaterializable(DefMI))
      continue;
    reMattable_.insert(VNI);
  }

  // Often, no defs are remattable.
  if (reMattable_.empty())
    return;

  // Try to remat before all uses of li_->reg.
  bool anyRemat = false;
  for (MachineRegisterInfo::use_nodbg_iterator
       RI = mri_.use_nodbg_begin(li_->reg);
       MachineInstr *MI = RI.skipInstruction();)
     anyRemat |= reMaterializeFor(MI);

  if (!anyRemat)
    return;

  // Remove any values that were completely rematted.
  bool anyRemoved = false;
  for (SmallPtrSet<VNInfo*, 8>::iterator I = reMattable_.begin(),
       E = reMattable_.end(); I != E; ++I) {
    VNInfo *VNI = *I;
    if (VNI->hasPHIKill() || usedValues_.count(VNI))
      continue;
    MachineInstr *DefMI = lis_.getInstructionFromIndex(VNI->def);
    DEBUG(dbgs() << "\tremoving dead def: " << VNI->def << '\t' << *DefMI);
    lis_.RemoveMachineInstrFromMaps(DefMI);
    vrm_.RemoveMachineInstrFromMaps(DefMI);
    DefMI->eraseFromParent();
    VNI->setIsDefAccurate(false);
    anyRemoved = true;
  }

  if (!anyRemoved)
    return;

  // Removing values may cause debug uses where li_ is not live.
  for (MachineRegisterInfo::use_iterator RI = mri_.use_begin(li_->reg);
       MachineInstr *MI = RI.skipInstruction();) {
    if (!MI->isDebugValue())
      continue;
    // Try to preserve the debug value if li_ is live immediately after it.
    MachineBasicBlock::iterator NextMI = MI;
    ++NextMI;
    if (NextMI != MI->getParent()->end() && !lis_.isNotInMIMap(NextMI)) {
      VNInfo *VNI = li_->getVNInfoAt(lis_.getInstructionIndex(NextMI));
      if (VNI && (VNI->hasPHIKill() || usedValues_.count(VNI)))
        continue;
    }
    DEBUG(dbgs() << "Removing debug info due to remat:" << "\t" << *MI);
    MI->eraseFromParent();
  }
}