void PCB_EDIT_FRAME::duplicateZone( wxDC* aDC, ZONE_CONTAINER* aZone )
{
ZONE_CONTAINER* newZone = new ZONE_CONTAINER( GetBoard() );
newZone->Copy( aZone );
newZone->UnFill();
ZONE_SETTINGS zoneSettings;
zoneSettings << *aZone;
bool success;
if( aZone->GetIsKeepout() )
success = InvokeKeepoutAreaEditor( this, &zoneSettings );
else if( aZone->IsOnCopperLayer() )
success = InvokeCopperZonesEditor( this, &zoneSettings );
else
success = InvokeNonCopperZonesEditor( this, aZone, &zoneSettings );
if( success )
{
zoneSettings.ExportSetting( *newZone );
newZone->m_Poly->Hatch();
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList.ClearListAndDeleteItems();
SaveCopyOfZones( s_PickedList, GetBoard(), newZone->GetNet(), newZone->GetLayer() );
GetBoard()->Add( newZone );
ITEM_PICKER picker( newZone, UR_NEW );
s_PickedList.PushItem( picker );
GetScreen()->SetCurItem( NULL ); // This outline may be deleted when merging outlines
// Combine zones if possible
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, newZone );
// Redraw zones
GetBoard()->RedrawAreasOutlines( m_canvas, aDC, GR_OR, newZone->GetLayer() );
GetBoard()->RedrawFilledAreas( m_canvas, aDC, GR_OR, newZone->GetLayer() );
if( GetBoard()->GetAreaIndex( newZone ) >= 0
&& GetBoard()->Test_Drc_Areas_Outlines_To_Areas_Outlines( newZone, true ) )
{
DisplayError( this, _( "Duplicate Zone: The outline of the duplicated zone fails DRC check!" ) );
}
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList( s_PickedList, UR_UNSPECIFIED );
s_PickedList.ClearItemsList();
OnModify();
}
else
delete newZone;
}
int PCB_EDITOR_CONTROL::ZoneDuplicate( const TOOL_EVENT& aEvent )
{
auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
const auto& selection = selTool->GetSelection();
// because this pops up the zone editor, it would be confusing
// to handle multiple zones, so just handle single selections
// containing exactly one zone
if( selection.Size() != 1 )
return 0;
auto oldZone = dyn_cast<ZONE_CONTAINER*>( selection[0] );
if( !oldZone )
return 0;
auto newZone = std::make_unique<ZONE_CONTAINER>( *oldZone );
newZone->ClearSelected();
newZone->UnFill();
ZONE_SETTINGS zoneSettings;
zoneSettings << *oldZone;
bool success = false;
if( oldZone->GetIsKeepout() )
success = InvokeKeepoutAreaEditor( m_frame, &zoneSettings );
else if( oldZone->IsOnCopperLayer() )
success = InvokeCopperZonesEditor( m_frame, &zoneSettings );
else
success = InvokeNonCopperZonesEditor( m_frame, oldZone, &zoneSettings );
// If the new zone is on the same layer as the the initial zone,
// do nothing
if( success && ( oldZone->GetLayer() == zoneSettings.m_CurrentZone_Layer ) )
{
DisplayError( m_frame,
_( "The duplicated zone cannot be on the same layer as the original zone." ) );
success = false;
}
// duplicate the zone
if( success )
{
BOARD_COMMIT commit( m_frame );
zoneSettings.ExportSetting( *newZone );
commit.Add( newZone.release() );
commit.Push( _( "Duplicate zone" ) );
}
return 0;
}
void DIALOG_COPPER_ZONE::ExportSetupToOtherCopperZones( wxCommandEvent& event )
{
if( !AcceptOptions( true, true ) )
return;
// Export settings ( but layer and netcode ) to others copper zones
BOARD* pcb = m_Parent->GetBoard();
for( int ii = 0; ii < pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = pcb->GetArea( ii );
// Cannot export settings from a copper zone
// to a zone keepout:
if( zone->GetIsKeepout() )
continue;
m_settings.ExportSetting( *zone, false ); // false = partial export
m_Parent->OnModify();
}
m_OnExitCode = ZONE_EXPORT_VALUES; // values are exported to others zones
}
void PCB_EDIT_FRAME::Edit_Zone_Params( wxDC* DC, ZONE_CONTAINER* aZone )
{
ZONE_EDIT_T edited;
ZONE_SETTINGS zoneInfo = GetZoneSettings();
m_canvas->SetIgnoreMouseEvents( true );
// Save initial zones configuration, for undo/redo, before adding new zone
// note the net name and the layer can be changed, so we must save all zones
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList.ClearListAndDeleteItems();
SaveCopyOfZones(s_PickedList, GetBoard(), -1, -1 );
if( aZone->GetIsKeepout() )
{
// edit a keepout area on a copper layer
zoneInfo << *aZone;
edited = InvokeKeepoutAreaEditor( this, &zoneInfo );
}
else if( aZone->GetLayer() < FIRST_NO_COPPER_LAYER )
{
// edit a zone on a copper layer
zoneInfo << *aZone;
edited = InvokeCopperZonesEditor( this, &zoneInfo );
}
else
{
edited = InvokeNonCopperZonesEditor( this, aZone, &zoneInfo );
}
m_canvas->MoveCursorToCrossHair();
m_canvas->SetIgnoreMouseEvents( false );
if( edited == ZONE_ABORT )
{
s_AuxiliaryList.ClearListAndDeleteItems();
s_PickedList.ClearListAndDeleteItems();
return;
}
SetZoneSettings( zoneInfo );
if( edited == ZONE_EXPORT_VALUES )
{
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
s_PickedList.ClearItemsList(); // s_ItemsListPicker is no more owner of picked items
return;
}
// Undraw old zone outlines
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* edge_zone = GetBoard()->GetArea( ii );
edge_zone->Draw( m_canvas, DC, GR_XOR );
}
zoneInfo.ExportSetting( *aZone );
NETINFO_ITEM* net = GetBoard()->FindNet( zoneInfo.m_NetcodeSelection );
if( net ) // net == NULL should not occur
aZone->SetNetName( net->GetNetname() );
// Combine zones if possible
GetBoard()->OnAreaPolygonModified( &s_AuxiliaryList, aZone );
// Redraw the real new zone outlines
GetBoard()->RedrawAreasOutlines( m_canvas, DC, GR_OR, -1 );
UpdateCopyOfZonesList( s_PickedList, s_AuxiliaryList, GetBoard() );
SaveCopyInUndoList(s_PickedList, UR_UNSPECIFIED);
s_PickedList.ClearItemsList(); // s_ItemsListPicker is no longer owner of picked items
OnModify();
}
int PCB_EDIT_FRAME::Begin_Zone( wxDC* DC )
{
ZONE_SETTINGS zoneInfo = GetZoneSettings();
// verify if s_CurrentZone exists (could be deleted since last selection) :
int ii;
for( ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
if( s_CurrentZone == GetBoard()->GetArea( ii ) )
break;
}
if( ii >= GetBoard()->GetAreaCount() ) // Not found: could be deleted since last selection
{
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
}
// If no zone contour in progress, a new zone is being created:
if( !GetBoard()->m_CurrentZoneContour )
{
if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT &&
getActiveLayer() >= FIRST_NON_COPPER_LAYER )
{
DisplayError( this,
_( "Error: a keepout area is allowed only on copper layers" ) );
return 0;
}
else
GetBoard()->m_CurrentZoneContour = new ZONE_CONTAINER( GetBoard() );
}
ZONE_CONTAINER* zone = GetBoard()->m_CurrentZoneContour;
if( zone->GetNumCorners() == 0 ) // Start a new contour: init zone params (net, layer ...)
{
if( !s_CurrentZone ) // A new outline is created, from scratch
{
ZONE_EDIT_T edited;
// Init zone params to reasonable values
zone->SetLayer( getActiveLayer() );
// Prompt user for parameters:
m_canvas->SetIgnoreMouseEvents( true );
if( zone->IsOnCopperLayer() )
{
// Put a zone on a copper layer
if( GetBoard()->GetHighLightNetCode() > 0 )
{
zoneInfo.m_NetcodeSelection = GetBoard()->GetHighLightNetCode();
zone->SetNet( zoneInfo.m_NetcodeSelection );
zone->SetNetNameFromNetCode( );
}
double tmp = ZONE_THERMAL_RELIEF_GAP_MIL;
wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_GAP_STRING_KEY, &tmp );
zoneInfo.m_ThermalReliefGap = KiROUND( tmp * IU_PER_MILS);
tmp = ZONE_THERMAL_RELIEF_COPPER_WIDTH_MIL;
wxGetApp().GetSettings()->Read( ZONE_THERMAL_RELIEF_COPPER_WIDTH_STRING_KEY,
&tmp );
zoneInfo.m_ThermalReliefCopperBridge = KiROUND( tmp * IU_PER_MILS );
tmp = ZONE_CLEARANCE_MIL;
wxGetApp().GetSettings()->Read( ZONE_CLEARANCE_WIDTH_STRING_KEY,
&tmp );
zoneInfo.m_ZoneClearance = KiROUND( tmp * IU_PER_MILS );
tmp = ZONE_THICKNESS_MIL;
wxGetApp().GetSettings()->Read( ZONE_MIN_THICKNESS_WIDTH_STRING_KEY,
&tmp );
zoneInfo.m_ZoneMinThickness = KiROUND( tmp * IU_PER_MILS );
zoneInfo.m_CurrentZone_Layer = zone->GetLayer();
if( GetToolId() == ID_PCB_KEEPOUT_AREA_BUTT )
{
zoneInfo.SetIsKeepout( true );
edited = InvokeKeepoutAreaEditor( this, &zoneInfo );
}
else
{
zoneInfo.SetIsKeepout( false );
edited = InvokeCopperZonesEditor( this, &zoneInfo );
}
}
else // Put a zone on a non copper layer (technical layer)
{
zoneInfo.SetIsKeepout( false );
zoneInfo.m_NetcodeSelection = 0; // No net for non copper zones
edited = InvokeNonCopperZonesEditor( this, zone, &zoneInfo );
}
m_canvas->MoveCursorToCrossHair();
m_canvas->SetIgnoreMouseEvents( false );
if( edited == ZONE_ABORT )
return 0;
// Switch active layer to the selected zone layer
setActiveLayer( zoneInfo.m_CurrentZone_Layer );
SetZoneSettings( zoneInfo );
}
else
{
// Start a new contour: init zone params (net and layer) from an existing
// zone (add cutout or similar zone)
zoneInfo.m_CurrentZone_Layer = s_CurrentZone->GetLayer();
setActiveLayer( s_CurrentZone->GetLayer() );
zoneInfo << *s_CurrentZone;
SetZoneSettings( zoneInfo );
}
// Show the Net for zones on copper layers
if( zoneInfo.m_CurrentZone_Layer < FIRST_NO_COPPER_LAYER &&
! zoneInfo.GetIsKeepout() )
{
if( s_CurrentZone )
{
zoneInfo.m_NetcodeSelection = s_CurrentZone->GetNet();
GetBoard()->SetZoneSettings( zoneInfo );
}
if( GetBoard()->IsHighLightNetON() )
{
HighLight( DC ); // Remove old highlight selection
}
GetBoard()->SetHighLightNet( zoneInfo.m_NetcodeSelection );
HighLight( DC );
}
if( !s_AddCutoutToCurrentZone )
s_CurrentZone = NULL; // the zone is used only once ("add similar zone" command)
}
// if first segment
if( zone->GetNumCorners() == 0 )
{
zone->SetFlags( IS_NEW );
zone->SetTimeStamp( GetNewTimeStamp() );
zoneInfo.ExportSetting( *zone );
zone->m_Poly->Start( zoneInfo.m_CurrentZone_Layer,
GetScreen()->GetCrossHairPosition().x,
GetScreen()->GetCrossHairPosition().y,
zone->GetHatchStyle() );
zone->AppendCorner( GetScreen()->GetCrossHairPosition() );
if( Drc_On && (m_drc->Drc( zone, 0 ) == BAD_DRC) && zone->IsOnCopperLayer() )
{
zone->ClearFlags();
zone->RemoveAllContours();
// use the form of SetCurItem() which does not write to the msg panel,
// SCREEN::SetCurItem(), so the DRC error remains on screen.
// PCB_EDIT_FRAME::SetCurItem() calls DisplayInfo().
GetScreen()->SetCurItem( NULL );
DisplayError( this,
_( "DRC error: this start point is inside or too close an other area" ) );
return 0;
}
SetCurItem( zone );
m_canvas->SetMouseCapture( Show_New_Edge_While_Move_Mouse, Abort_Zone_Create_Outline );
}
else // edge in progress:
{
ii = zone->GetNumCorners() - 1;
// edge in progress : the current corner coordinate was set
// by Show_New_Edge_While_Move_Mouse
if( zone->GetCornerPosition( ii - 1 ) != zone->GetCornerPosition( ii ) )
{
if( !Drc_On || !zone->IsOnCopperLayer() || ( m_drc->Drc( zone, ii - 1 ) == OK_DRC ) )
{
// Ok, we can add a new corner
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
zone->AppendCorner( GetScreen()->GetCrossHairPosition() );
SetCurItem( zone ); // calls DisplayInfo().
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( DC, wxPoint(0,0), false );
}
}
}
return zone->GetNumCorners();
}
int DRAWING_TOOL::drawZone( bool aKeepout )
{
ZONE_CONTAINER* zone = NULL;
DRAWSEGMENT line45;
DRAWSEGMENT* helperLine = NULL; // we will need more than one helper line
// if one day it is possible to draw zones in the footprint editor,
// then hereby I'm letting you know that this tool does not handle UR_MODEDIT undo yet
assert( !m_editModules );
// Add a VIEW_GROUP that serves as a preview for the new item
KIGFX::VIEW_GROUP preview( m_view );
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
Activate();
VECTOR2I origin;
int numPoints = 0;
bool direction45 = false; // 45 degrees only mode
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
bool updatePreview = false; // should preview be updated
VECTOR2I cursorPos = m_controls->GetCursorPosition();
// Enable 45 degrees lines only mode by holding control
if( direction45 != ( evt->Modifier( MD_CTRL ) && numPoints > 0 ) )
{
direction45 = evt->Modifier( MD_CTRL );
if( direction45 )
{
preview.Add( &line45 );
make45DegLine( helperLine, &line45 );
}
else
{
preview.Remove( &line45 );
helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
}
updatePreview = true;
}
if( evt->IsCancel() || evt->IsActivate() )
{
if( numPoints > 0 ) // cancel the current zone
{
delete zone;
zone = NULL;
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
if( direction45 )
{
preview.Remove( &line45 );
direction45 = false;
}
preview.FreeItems();
updatePreview = true;
numPoints = 0;
}
else // there is no zone currently drawn - just stop the tool
break;
if( evt->IsActivate() ) // now finish unconditionally
break;
}
else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
{
// Check if it is double click / closing line (so we have to finish the zone)
if( evt->IsDblClick( BUT_LEFT ) || ( numPoints > 0 && cursorPos == origin ) )
{
if( numPoints > 2 ) // valid zone consists of more than 2 points
{
assert( zone->GetNumCorners() > 2 );
// Finish the zone
if( direction45 )
zone->AppendCorner( cursorPos == origin ? line45.GetStart() : line45.GetEnd() );
zone->Outline()->CloseLastContour();
zone->Outline()->RemoveNullSegments();
m_board->Add( zone );
m_view->Add( zone );
if( !aKeepout )
static_cast<PCB_EDIT_FRAME*>( m_frame )->Fill_Zone( zone );
zone->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
m_board->GetRatsnest()->Update( zone );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( zone, UR_NEW );
zone = NULL;
}
else
{
delete zone;
zone = NULL;
}
numPoints = 0;
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
if( direction45 )
{
preview.Remove( &line45 );
direction45 = false;
}
preview.FreeItems();
updatePreview = true;
}
else
{
if( numPoints == 0 ) // it's the first click
{
// Get the current default settings for zones
ZONE_SETTINGS zoneInfo = m_frame->GetZoneSettings();
zoneInfo.m_CurrentZone_Layer = m_frame->GetScreen()->m_Active_Layer;
m_controls->SetAutoPan( true );
m_controls->CaptureCursor( true );
// Show options dialog
ZONE_EDIT_T dialogResult;
if( aKeepout )
dialogResult = InvokeKeepoutAreaEditor( m_frame, &zoneInfo );
else
{
if( IsCopperLayer( zoneInfo.m_CurrentZone_Layer ) )
dialogResult = InvokeCopperZonesEditor( m_frame, &zoneInfo );
else
dialogResult = InvokeNonCopperZonesEditor( m_frame, NULL, &zoneInfo );
}
if( dialogResult == ZONE_ABORT )
{
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
continue;
}
// Apply the selected settings
zone = new ZONE_CONTAINER( m_board );
zoneInfo.ExportSetting( *zone );
m_frame->GetGalCanvas()->SetTopLayer( zoneInfo.m_CurrentZone_Layer );
// Add the first point
zone->Outline()->Start( zoneInfo.m_CurrentZone_Layer,
cursorPos.x, cursorPos.y,
zone->GetHatchStyle() );
origin = cursorPos;
// Helper line represents the currently drawn line of the zone polygon
helperLine = new DRAWSEGMENT;
helperLine->SetShape( S_SEGMENT );
helperLine->SetWidth( 1 );
helperLine->SetLayer( zoneInfo.m_CurrentZone_Layer );
helperLine->SetStart( wxPoint( cursorPos.x, cursorPos.y ) );
helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
line45 = *helperLine;
preview.Add( helperLine );
}
else
{
zone->AppendCorner( helperLine->GetEnd() );
helperLine = new DRAWSEGMENT( *helperLine );
helperLine->SetStart( helperLine->GetEnd() );
preview.Add( helperLine );
}
++numPoints;
updatePreview = true;
}
}
else if( evt->IsMotion() && numPoints > 0 )
{
// 45 degree lines
if( direction45 )
make45DegLine( helperLine, &line45 );
else
helperLine->SetEnd( wxPoint( cursorPos.x, cursorPos.y ) );
// Show a preview of the item
updatePreview = true;
}
if( updatePreview )
preview.ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}