Пример #1
0
void settings_default()
{
    timer.setDefault();
    strcpy((char*)conf.sysName, "           ");
    conf.warnTime = 2;
    conf.mirrorTime = 2;
    conf.cameraFPS = 33;
    conf.bulbMode = 0;
    conf.lcdColor = 0;
    conf.cameraMake = CANON;
    conf.settingsVersion = SETTINGS_VERSION;
    conf.shutterVersion = SHUTTER_VERSION;
    conf.lcdBacklightTime = 3;
    conf.sysOffTime = 12;
    conf.flashlightOffTime = 3;
    conf.devMode = 0;
    conf.auxPort = AUX_MODE_DISABLED;
    conf.btMode = BT_MODE_SLEEP;
    conf.halfPress = HALF_PRESS_ENABLED;
    conf.bulbOffset = 75;
    conf.interface = INTERFACE_AUTO;
    conf.brampMode = BRAMP_MODE_BULB_ISO;
    conf.autoRun = AUTO_RUN_OFF;
    conf.modeSwitch = USB_CHANGE_MODE_DISABLED;
    conf.dollyPulse = 100;
    conf.lcdContrast = 0xf;
    conf.lcdCoefficent = 0x7;
    conf.lcdBias = 0x4;
    conf.bulbMin = 56;
    conf.isoMax = 10;
    conf.apertureMax = 31;
    conf.apertureMin = 2;
    settings_save();
    settings_load();
}
Пример #2
0
void settings_default()
{
    timer.setDefault();
    strcpy((char*)conf.sysName, "           ");
    conf.warnTime = 2;
    conf.mirrorTime = 2;
    conf.lcdColor = 0;
    conf.settingsVersion = SETTINGS_VERSION;
    conf.shutterVersion = SHUTTER_VERSION;
    conf.lcdBacklightTime = 3;
    conf.sysOffTime = 12;
    conf.flashlightOffTime = 3;
    conf.devMode = 0;
    conf.auxPort = AUX_MODE_DISABLED;
    conf.btMode = BT_MODE_SLEEP;
    conf.brampMode = BRAMP_MODE_BULB_ISO;
    conf.autoRun = AUTO_RUN_OFF;
    conf.dollyPulse = 100;
    conf.dollyPulse2 = 100;
    conf.lcdContrast = 3;
    conf.lcdCoefficent = 0x7;
    conf.lcdBias = 0x3;
    conf.isoMax = 10;
    conf.apertureMax = 31;
    conf.apertureMin = 2;
    conf.debugEnabled = 0;
    conf.arbitraryBulb = 0;
    conf.menuWrap = 1;
    conf.extendedRamp = 0;
    strcpy((char*)conf.test, "Test       ");
    conf.lightIntegrationMinutes = 5;
    conf.pFactor = 10;
    conf.iFactor = 12;
    conf.dFactor = 12;
    conf.errorAlert = 0;
    conf.lightThreshold = 20;
    conf.linearInterpolation = 0;

    conf.camera.cameraFPS = 33;
    conf.camera.nikonUSB = 0;
    conf.camera.bulbEndOffset = 8;
    conf.camera.bulbMin = 56;
    conf.camera.bulbOffset = 75;
    conf.camera.negBulbOffset = 0;
    conf.camera.interface = INTERFACE_AUTO;
    conf.camera.cameraMake = CANON;
    conf.camera.bulbMode = 0;
    conf.camera.halfPress = HALF_PRESS_ENABLED;
    conf.camera.modeSwitch = USB_CHANGE_MODE_DISABLED;
    conf.camera.brampGap = 6;

    for(uint8_t i = 0; i < MAX_CAMERAS_SETTINGS; i++)
    {
        camera_settings_t cs;
        memset((void*)&cs, 0, sizeof(camera_settings_t));
        eeprom_write_block((const void*)&cs, &camera_settings_eep[i], sizeof(camera_settings_t));
    }
    settings_save();
    settings_load();
}
Пример #3
0
void settings_init()
{
    settings_load();
    uint8_t need_save = 0;
    if(conf.shutterVersion != SHUTTER_VERSION)
    {
        timer.setDefault();
        conf.shutterVersion = SHUTTER_VERSION;
        need_save = 1;
    }
    if(conf.settingsVersion != SETTINGS_VERSION)
    {
        settings_default();
        need_save = 0;
        settings_reset = 1;
        // This is where we'd put a setup wizard
    }
    if(need_save) settings_save();
}
Пример #4
0
void settings_init()
{
  settings_load();
  if(eeprom_read_byte((const uint8_t *) &conf_eep) == 255 || conf.version != VERSION)
  {
    timer.setDefault();
    strcpy((char *)conf.sysName, "sys01");
    conf.warnTime = 2;
    conf.mirrorTime = 2;
    conf.cameraFPS = 34;
    conf.bulbMode = 0;
    conf.lcdColor = 0;
    conf.cameraMake = CANON;
    conf.version = VERSION;
    conf.lcdBacklightTime = 3;
    conf.sysOffTime = 12;
    conf.flashlightOffTime = 3;
    settings_save();
  }
  settings_load();
}