Пример #1
0
int main(int argc, char *argv[]) {
  //
  Teuchos::GlobalMPISession session(&argc, &argv, NULL);
  //
  typedef double                            ST;
  typedef Teuchos::ScalarTraits<ST>        SCT;
  typedef SCT::magnitudeType                MT;
  typedef Epetra_MultiVector                MV;
  typedef Epetra_Operator                   OP;
  typedef Belos::MultiVecTraits<ST,MV>     MVT;
  typedef Belos::OperatorTraits<ST,MV,OP>  OPT;

  using Teuchos::ParameterList;
  using Teuchos::RCP;
  using Teuchos::rcp;

  bool verbose = false;
  bool success = true;
  try {
    bool proc_verbose = false;
    bool leftprec = true; // use left preconditioning to solve these linear systems
    int frequency = -1;  // how often residuals are printed by solver
    int blocksize = 4;
    int numrhs = 15;
    int maxrestarts = 15; // number of restarts allowed
    int length = 25;
    int maxiters = -1;    // maximum iterations allowed
    std::string filename("orsirr1.hb");
    MT tol = 1.0e-5;  // relative residual tolerance

    Teuchos::CommandLineProcessor cmdp(false,true);
    cmdp.setOption("verbose","quiet",&verbose,"Print messages and results.");
    cmdp.setOption("left-prec","right-prec",&leftprec,"Left preconditioning or right.");
    cmdp.setOption("frequency",&frequency,"Solvers frequency for printing residuals (#iters).");
    cmdp.setOption("filename",&filename,"Filename for Harwell-Boeing test matrix.");
    cmdp.setOption("tol",&tol,"Relative residual tolerance used by GMRES solver.");
    cmdp.setOption("num-rhs",&numrhs,"Number of right-hand sides to be solved for.");
    cmdp.setOption("max-restarts",&maxrestarts,"Maximum number of restarts allowed for GMRES solver.");
    cmdp.setOption("blocksize",&blocksize,"Block size used by GMRES.");
    cmdp.setOption("maxiters",&maxiters,"Maximum number of iterations per linear system (-1 = adapted to problem/block size).");
    cmdp.setOption("subspace-size",&length,"Dimension of Krylov subspace used by GMRES.");
    if (cmdp.parse(argc,argv) != Teuchos::CommandLineProcessor::PARSE_SUCCESSFUL) {
      return -1;
    }
    if (!verbose)
      frequency = -1;  // reset frequency if test is not verbose
    //
    // Get the problem
    //
    int MyPID;
    RCP<Epetra_CrsMatrix> A;
    int return_val =Belos::createEpetraProblem(filename,NULL,&A,NULL,NULL,&MyPID);
    const Epetra_Map &Map = A->RowMap();
    if(return_val != 0) return return_val;
    proc_verbose = verbose && (MyPID==0); /* Only print on zero processor */
    //
    // *****Construct the Preconditioner*****
    //
    if (proc_verbose) std::cout << std::endl << std::endl;
    if (proc_verbose) std::cout << "Constructing ILU preconditioner" << std::endl;
    int Lfill = 2;
    // if (argc > 2) Lfill = atoi(argv[2]);
    if (proc_verbose) std::cout << "Using Lfill = " << Lfill << std::endl;
    int Overlap = 2;
    // if (argc > 3) Overlap = atoi(argv[3]);
    if (proc_verbose) std::cout << "Using Level Overlap = " << Overlap << std::endl;
    double Athresh = 0.0;
    // if (argc > 4) Athresh = atof(argv[4]);
    if (proc_verbose) std::cout << "Using Absolute Threshold Value of " << Athresh << std::endl;
    double Rthresh = 1.0;
    // if (argc >5) Rthresh = atof(argv[5]);
    if (proc_verbose) std::cout << "Using Relative Threshold Value of " << Rthresh << std::endl;
    //
    Teuchos::RCP<Ifpack_IlukGraph> ilukGraph;
    Teuchos::RCP<Ifpack_CrsRiluk> ilukFactors;
    //
    if (Lfill > -1) {
      ilukGraph = Teuchos::rcp(new Ifpack_IlukGraph(A->Graph(), Lfill, Overlap));
      int info = ilukGraph->ConstructFilledGraph();
      assert( info == 0 );
      ilukFactors = Teuchos::rcp(new Ifpack_CrsRiluk(*ilukGraph));
      int initerr = ilukFactors->InitValues(*A);
      if (initerr != 0) std::cout << "InitValues error = " << initerr;
      info = ilukFactors->Factor();
      assert( info == 0 );

    }
    //
    bool transA = false;
    double Cond_Est;
    ilukFactors->Condest(transA, Cond_Est);
    if (proc_verbose) {
      std::cout << "Condition number estimate for this preconditoner = " << Cond_Est << std::endl;
      std::cout << std::endl;
    }

    //
    // Create the Belos preconditioned operator from the Ifpack preconditioner.
    // NOTE:  This is necessary because Belos expects an operator to apply the
    //        preconditioner with Apply() NOT ApplyInverse().
    RCP<Belos::EpetraPrecOp> Prec = rcp( new Belos::EpetraPrecOp( ilukFactors ) );

    //
    // ********Other information used by block solver***********
    // **************(can be user specified)********************
    //
    const int NumGlobalElements = Map.NumGlobalElements();
    if (maxiters == -1)
      maxiters = NumGlobalElements/blocksize - 1; // maximum number of iterations to run
    //
    ParameterList innerBelosList;
    innerBelosList.set( "Solver", "BlockGmres" );               // Set the inner solver to use block Gmres
    innerBelosList.set( "Num Blocks", length );                 // Maximum number of blocks in Krylov factorization
    innerBelosList.set( "Block Size", blocksize );              // Blocksize to be used by iterative solver
    innerBelosList.set( "Maximum Iterations", maxiters );       // Maximum number of iterations allowed
    innerBelosList.set( "Maximum Restarts", maxrestarts );      // Maximum number of restarts allowed
    innerBelosList.set( "Convergence Tolerance", 1.0e-2 );       // Relative convergence tolerance requested
    innerBelosList.set( "Verbosity", Belos::Errors + Belos::Warnings );
    innerBelosList.set( "Timer Label", "Belos Preconditioner Solve" );// Choose a different label for the inner solve
    //
    // *****Construct linear problem using A and Prec*****
    // ***The solution and RHS vectors will be set later**
    Belos::LinearProblem<double,MV,OP> innerProblem;
    innerProblem.setOperator( A );
    if (leftprec)
      innerProblem.setLeftPrec( Prec );
    else
      innerProblem.setRightPrec( Prec );
    innerProblem.setLabel( "Belos Preconditioner Solve" );
    //
    // *****Create the inner block Gmres iteration********
    //
    RCP<Belos::EpetraOperator> innerSolver;
    innerSolver = rcp( new Belos::EpetraOperator( rcp(&innerProblem,false) , rcp(&innerBelosList,false), true ) );
    //
    // *****Construct solution std::vector and random right-hand-sides *****
    //
    RCP<Epetra_MultiVector> X = rcp( new Epetra_MultiVector(Map, numrhs) );
    X->PutScalar( 0.0 );
    RCP<Epetra_MultiVector> B = rcp( new Epetra_MultiVector(Map, numrhs) );
    B->Random();
    Belos::LinearProblem<double,MV,OP> problem( A, X, B );
    problem.setRightPrec( innerSolver );
    problem.setLabel( "Belos Flexible Gmres Solve" );
    bool set = problem.setProblem();
    if (set == false) {
      if (proc_verbose)
        std::cout << std::endl << "ERROR:  Belos::LinearProblem failed to set up correctly!" << std::endl;
      return -1;
    }
    //
    // Copy the list for the inner solver
    //
    Teuchos::ParameterList belosList( innerBelosList );
    belosList.set( "Flexible Gmres" , true );              // Use flexible Gmres to solve this problem
    belosList.set( "Timer Label", "Belos Flexible Gmres Solve" );// Choose a different label for the outer solve
    belosList.set( "Convergence Tolerance", tol );         // Relative convergence tolerance requested
    if (verbose) {
      belosList.set( "Verbosity", Belos::Errors + Belos::Warnings +
          Belos::TimingDetails + Belos::StatusTestDetails );
      if (frequency > 0)
        belosList.set( "Output Frequency", frequency );
    }
    //
    // *******************************************************************
    // **********Create the flexible, block Gmres iteration***************
    // *******************************************************************
    //
    RCP< Belos::SolverManager<double,MV,OP> > solver;
    solver = rcp( new Belos::BlockGmresSolMgr<double,MV,OP>( rcp(&problem,false), rcp(&belosList,false) ) );
    //
    //
    // **********Print out information about problem*******************
    //
    if (proc_verbose) {
      std::cout << std::endl << std::endl;
      std::cout << "Dimension of matrix: " << NumGlobalElements << std::endl;
      std::cout << "Number of right-hand sides: " << numrhs << std::endl;
      std::cout << "Block size used by solver: " << blocksize << std::endl;
      std::cout << "Number of restarts allowed: " << maxrestarts << std::endl;
      std::cout << "Length of block Arnoldi factorization: " << length*blocksize << " ( "<< length << " blocks ) " <<std::endl;
      std::cout << "Max number of Gmres iterations: " << maxiters << std::endl;
      std::cout << "Relative residual tolerance: " << tol << std::endl;
      std::cout << std::endl;
    }
    //
    // Perform solve
    //
    Belos::ReturnType ret = solver->solve();
    //
    // Compute actual residuals.
    //
    bool badRes = false;
    std::vector<double> actual_resids( numrhs );
    std::vector<double> rhs_norm( numrhs );
    Epetra_MultiVector R(Map, numrhs);
    OPT::Apply( *A, *X, R );
    MVT::MvAddMv( -1.0, R, 1.0, *B, R );
    MVT::MvNorm( R, actual_resids );
    MVT::MvNorm( *B, rhs_norm );
    if (proc_verbose) {
      std::cout<< "---------- Actual Residuals (normalized) ----------"<<std::endl<<std::endl;
      for ( int i=0; i<numrhs; i++) {
        double actRes = actual_resids[i]/rhs_norm[i];
        std::cout<<"Problem "<<i<<" : \t"<< actRes <<std::endl;
        if (actRes > tol ) badRes = true;
      }
    }

    success = ret==Belos::Converged && !badRes;

    if (success) {
      if (proc_verbose)
        std::cout << "End Result: TEST PASSED" << std::endl;
    } else {
      if (proc_verbose)
        std::cout << "End Result: TEST FAILED" << std::endl;
    }
  }
  TEUCHOS_STANDARD_CATCH_STATEMENTS(verbose,std::cerr,success);

  return success ? EXIT_SUCCESS : EXIT_FAILURE;
} // end test_bl_fgmres_hb.cpp
Пример #2
0
/// actual computation
void PoissonSolver::computeField(VField_Edge_t & EFD,
                                 VField_Cell_t & HFD,
                                 VField_Edge_t & JFD,
                                 const double & dt,
                                 const double & tol,
                                 const int & maxIterations)
{
    Mesh_t & mesh = EFD.get_mesh();
    FieldLayout<DIM> & FL = EFD.getLayout();
    const NDIndex<DIM> lDom = FL.getLocalNDIndex();

    _bunch.saveR();

    const GCS_t & gcs = EFD.getGuardCellSizes();

    Timings::startTimer(_setupTimer);
    Epetra_Map* Map = getGlobalElements();

    Teuchos::RCP<Epetra_Vector> LHS;
    LHS = Teuchos::rcp(new Epetra_Vector(*Map));

    Teuchos::RCP<Epetra_Vector> RHS;
    RHS = Teuchos::rcp(new Epetra_Vector(*Map));

    Teuchos::RCP<Epetra_CrsMatrix> A;
    A = Teuchos::rcp(new Epetra_CrsMatrix(Copy, *Map, 5));

    StencilGeometry(RHS, A);

    // print("PoissonMatrix.dat", RHS, A);

    Teuchos::ParameterList belosList;
    belosList.set( "Maximum Iterations", maxIterations );  // Maximum number of iterations allowed
    belosList.set( "Convergence Tolerance", tol );
    belosList.set( "Verbosity", (Belos::Errors +
                                 Belos::Warnings +
                                 Belos::TimingDetails +
                                 Belos::FinalSummary +
                                 Belos::StatusTestDetails) );

    Teuchos::ParameterList MLList;
    SetupMLList(MLList);

    Teuchos::RCP<ML_Epetra::MultiLevelPreconditioner> MLPrec =
        Teuchos::rcp(new ML_Epetra::MultiLevelPreconditioner(*A, MLList,false));

    MLPrec->ComputePreconditioner();
    Teuchos::RCP<Belos::EpetraPrecOp> prec = Teuchos::rcp(new Belos::EpetraPrecOp(MLPrec));

    Belos::LinearProblem<ST, MV, OP> problem;
    problem.setOperator(A);
    problem.setLHS(LHS);
    problem.setRHS(RHS);
    problem.setLeftPrec(prec);

    if (!problem.isProblemSet()) {
        if (!problem.setProblem()) {
            std::cerr << "\nERROR: Belos::LinearProblem failed to set up correctly!" << std::endl;
        }
    }

    Teuchos::RCP< Belos::SolverManager<ST, MV, OP> > solver;
    solver = Teuchos::rcp( new Belos::BlockCGSolMgr<ST, MV, OP>(Teuchos::rcp(&problem, false), Teuchos::rcp(&belosList, false)));
    Timings::stopTimer(_setupTimer);

    BinaryVtkFile vtkFile;
    SField_t rho(mesh, FL, gcs);

    _bunch.drift_particles(dt / 2);
    _bunch.scatterQ(rho);
    _bunch.drift_particles(-dt / 2);

    fillRHS(rho, RHS);
    LHS->Random();
    problem.setProblem(Teuchos::null, RHS);
    Timings::startTimer(_solveTimer);
    solver->solve();
    Timings::stopTimer(_solveTimer);
    plotPotential(vtkFile, LHS, EFD, 1);
    fillFields(LHS, EFD, HFD, 1);

    _bunch.move_by(Vector_t(-0.5 * _hr[0] / _gamma, 0.0));
    _bunch.scatterQ(rho);

    fillRHS(rho, RHS);
    shiftLHS(rho, LHS, 1.0);
    problem.setProblem(Teuchos::null, RHS);
    belosList.set("Convergence Tolerance", 1e-6);
    solver->setParameters(Teuchos::rcp(&belosList, false));
    Timings::startTimer(_solveTimer);
    solver->solve();
    Timings::stopTimer(_solveTimer);
    plotPotential(vtkFile, LHS, EFD, 2);
    fillFields(LHS, EFD, HFD, 2);

    _bunch.restoreR();

    _bunch.scatterQ(rho);

    vtkFile.addScalarField(rho, "rho");

    JFD = 0.0;
    JFD[lDom[0]][lDom[1]](0) += Physics::c * sqrt(1.0 - 1.0 / (_gamma * _gamma)) * rho[lDom[0]][lDom[1]];

    fillRHS(rho, RHS);
    shiftLHS(rho, LHS, -0.5);
    problem.setProblem(Teuchos::null, RHS);
    Timings::startTimer(_solveTimer);
    solver->solve();
    Timings::stopTimer(_solveTimer);
    plotPotential(vtkFile, LHS, EFD, 0);
    fillFields(LHS, EFD, HFD, 0);

    vtkFile.writeFile("Data/potential");

    delete Map;
}