void Control::InCallMOSMSController(const CPData *cpData, TransactionEntry* transaction, GSM::SACCHLogicalChannel *LCH)
{
LOG(INFO) << *cpData;
// See GSM 04.11 Arrow Diagram A5 for the transaction
// Step 1 MS->Network CP-DATA containing RP-DATA
// Step 2 Network->MS CP-ACK
// Step 3 Network->MS CP-DATA containing RP-ACK
// Step 4 MS->Network CP-ACK
// LAPDm operation, from GSM 04.11, Annex F:
// """
// Case C: Mobile originating short message transfer, parallel call.
// The mobile station will send a SABM command on the SACCH when a CM_SERV_ACC
// message has been received from the network, allowing the short message
// transfer to start. If no hand over occurs the link will stay up until the
// MSC orders a explicit release, or the clearing procedure is invoked. If the
// parallel call is cleared before the short message transfer is finalized, the
// MSC will delay the clearing procedure toward the BSS, i.e. the channel
// release procedure is delayed.
// """
// Since there's a parallel call, we will assume correct provisioning.
// And we know that CM and SABM are established.
// Step 1 already happened in the SACCH service loop.
// Just get the L3 TI and set the high bit since it originated in the MS.
unsigned L3TI = cpData->TI() | 0x08;
transaction->L3TI(L3TI);
// Step 2
// Respond with CP-ACK.
// This just means that we got the message.
LOG(INFO) << "sending CPAck";
LCH->send(CPAck(L3TI),3);
// Parse the message in CM and process RP part.
// This is where we actually parse the message and send it out.
// FIXME -- We need to set the message ref correctly,
// even if the parsing fails.
// The compiler gives a warning here. Let it. It will remind someone to fix it.
unsigned ref;
bool success = false;
try {
CPData data;
data.parse(*cpData);
LOG(INFO) << "CPData " << data;
// Transfer out the RPDU -> TPDU -> delivery.
ref = data.RPDU().reference();
// This handler invokes higher-layer parsers, too.
success = handleRPDU(transaction,data.RPDU());
}
catch (SMSReadError) {
LOG(WARNING) << "SMS parsing failed (above L3)";
// Cause 95, "semantically incorrect message".
LCH->send(CPData(L3TI,RPError(95,ref)),3);
throw UnexpectedMessage(transaction->ID());
}
catch (GSM::L3ReadError) {
LOG(WARNING) << "SMS parsing failed (in L3)";
throw UnsupportedMessage(transaction->ID());
}
// Step 3
// Send CP-DATA containing RP-ACK and message reference.
if (success) {
LOG(INFO) << "sending RPAck in CPData";
LCH->send(CPData(L3TI,RPAck(ref)),3);
} else {
LOG(INFO) << "sending RPError in CPData";
// Cause 127 is "internetworking error, unspecified".
// See GSM 04.11 Table 8.4.
LCH->send(CPData(L3TI,RPError(127,ref)),3);
}
// Step 4
// Get CP-ACK from the MS.
GSM::L3Frame* CM = getFrameSMS(LCH);
if (CM->MTI()!=CPMessage::ACK) {
LOG(NOTICE) << "unexpected SMS CP message with MTI=" << CM->MTI() << " " << *CM;
throw UnexpectedMessage(transaction->ID());
}
LOG(DEBUG) << "ack from MS: " << *CM;
CPAck ack;
ack.parse(*CM);
LOG(INFO) << "CPAck " << ack;
/* I had a hell of a time testing this with my B100
I know it went off, that's all. If things fail, look
here -kurtis */
/* MOSMS RLLP request */
if (gConfig.defines("Control.SMS.QueryRRLP")) {
// Query for RRLP
if (!sendRRLP(transaction->subscriber(), LCH)) {
LOG(INFO) << "RRLP request failed";
}
}
gTransactionTable.remove(transaction);
}
void Control::MOSMSController(const GSM::L3CMServiceRequest *req, GSM::LogicalChannel *LCH)
{
assert(req);
assert(req->serviceType().type() == GSM::L3CMServiceType::ShortMessage);
assert(LCH);
assert(LCH->type() != GSM::SACCHType);
LOG(INFO) << "MOSMS, req " << *req;
// If we got a TMSI, find the IMSI.
// Note that this is a copy, not a reference.
GSM::L3MobileIdentity mobileID = req->mobileID();
resolveIMSI(mobileID,LCH);
// Create a transaction record.
TransactionEntry *transaction = new TransactionEntry(gConfig.getStr("SIP.Proxy.SMS").c_str(),mobileID,LCH);
gTransactionTable.add(transaction);
LOG(DEBUG) << "MOSMS: transaction: " << *transaction;
// See GSM 04.11 Arrow Diagram A5 for the transaction
// Step 1 MS->Network CP-DATA containing RP-DATA
// Step 2 Network->MS CP-ACK
// Step 3 Network->MS CP-DATA containing RP-ACK
// Step 4 MS->Network CP-ACK
// LAPDm operation, from GSM 04.11, Annex F:
// """
// Case A: Mobile originating short message transfer, no parallel call:
// The mobile station side will initiate SAPI 3 establishment by a SABM command
// on the DCCH after the cipher mode has been set. If no hand over occurs, the
// SAPI 3 link will stay up until the last CP-ACK is received by the MSC, and
// the clearing procedure is invoked.
// """
// FIXME: check provisioning
if (gConfig.getNum("GSM.Authentication")||gConfig.getNum("GSM.Encryption")) {
AuthenticationParameters authParams(mobileID);
registerIMSI(authParams, LCH);
authenticate(authParams, LCH);
}
// Let the phone know we're going ahead with the transaction.
if (LCH->isDecrypting()) {
LOG(INFO) << "Decryption ACTIVE for:" << mobileID << " CMServiceAccept NOT sent, because CipherModeCommand implies it.";
}
else {
LOG(INFO) << "Decryption NOT active for: " << mobileID << " Sending CMServiceAccept";
LCH->send(GSM::L3CMServiceAccept());
}
// Wait for SAP3 to connect.
// The first read on SAP3 is the ESTABLISH primitive.
delete getFrameSMS(LCH,GSM::ESTABLISH);
// Step 1
// Now get the first message.
// Should be CP-DATA, containing RP-DATA.
GSM::L3Frame *CM = getFrameSMS(LCH);
LOG(DEBUG) << "data from MS " << *CM;
if (CM->MTI()!=CPMessage::DATA) {
LOG(NOTICE) << "unexpected SMS CP message with TI=" << CM->MTI();
delete CM;
throw UnexpectedMessage();
}
unsigned L3TI = CM->TI() | 0x08;
transaction->L3TI(L3TI);
// Step 2
// Respond with CP-ACK.
// This just means that we got the message.
LOG(INFO) << "sending CPAck";
LCH->send(CPAck(L3TI),3);
// Parse the message in CM and process RP part.
// This is where we actually parse the message and send it out.
// FIXME -- We need to set the message ref correctly,
// even if the parsing fails.
// The compiler gives a warning here. Let it. It will remind someone to fix it.
unsigned ref;
bool success = false;
try {
CPData data;
data.parse(*CM);
LOG(INFO) << "CPData " << data;
// Transfer out the RPDU -> TPDU -> delivery.
ref = data.RPDU().reference();
// This handler invokes higher-layer parsers, too.
success = handleRPDU(transaction,data.RPDU());
}
catch (SMSReadError) {
LOG(WARNING) << "SMS parsing failed (above L3)";
// Cause 95, "semantically incorrect message".
LCH->send(CPData(L3TI,RPError(95,ref)),3);
delete CM;
throw UnexpectedMessage();
}
catch (GSM::L3ReadError) {
LOG(WARNING) << "SMS parsing failed (in L3)";
delete CM;
throw UnsupportedMessage();
}
delete CM;
// Step 3
// Send CP-DATA containing RP-ACK and message reference.
if (success) {
LOG(INFO) << "sending RPAck in CPData";
LCH->send(CPData(L3TI,RPAck(ref)),3);
} else {
LOG(INFO) << "sending RPError in CPData";
// Cause 127 is "internetworking error, unspecified".
// See GSM 04.11 Table 8.4.
LCH->send(CPData(L3TI,RPError(127,ref)),3);
}
// Step 4
// Get CP-ACK from the MS.
CM = getFrameSMS(LCH);
if (CM->MTI()!=CPMessage::ACK) {
LOG(NOTICE) << "unexpected SMS CP message with TI=" << CM->MTI();
throw UnexpectedMessage();
}
LOG(DEBUG) << "ack from MS: " << *CM;
CPAck ack;
ack.parse(*CM);
delete CM;
LOG(INFO) << "CPAck " << ack;
/* MOSMS RLLP request */
if (gConfig.defines("Control.SMS.QueryRRLP")) {
// Query for RRLP
if (!sendRRLP(mobileID, LCH)) {
LOG(INFO) << "RRLP request failed";
}
}
// Done.
LCH->send(GSM::L3ChannelRelease());
gTransactionTable.remove(transaction);
LOG(INFO) << "closing the Um channel";
}
bool Control::deliverSMSToMS(const char *callingPartyDigits, const char* message, const char* contentType, unsigned L3TI, GSM::LogicalChannel *LCH)
{
if (!LCH->multiframeMode(3)) {
// Start ABM in SAP3.
LCH->send(GSM::ESTABLISH,3);
// Wait for SAP3 ABM to connect.
// The next read on SAP3 should the ESTABLISH primitive.
// This won't return NULL. It will throw an exception if it fails.
delete getFrameSMS(LCH,GSM::ESTABLISH);
}
#if 0
// HACK -- Check for "Easter Eggs"
// TL-PID
unsigned TLPID=0;
if (strncmp(message,"#!TLPID",7)==0) sscanf(message,"#!TLPID%d",&TLPID);
// Step 1
// Send the first message.
// CP-DATA, containing RP-DATA.
unsigned reference = random() % 255;
CPData deliver(L3TI,
RPData(reference,
RPAddress(gConfig.getStr("SMS.FakeSrcSMSC").c_str()),
TLDeliver(callingPartyDigits,message,TLPID)));
#else
// TODO: Read MIME Type from smqueue!!
unsigned reference = random() % 255;
RPData rp_data;
if (strncmp(contentType,"text/plain",10)==0) {
rp_data = RPData(reference,
RPAddress(gConfig.getStr("SMS.FakeSrcSMSC").c_str()),
TLDeliver(callingPartyDigits,message,0));
} else if (strncmp(contentType,"application/vnd.3gpp.sms",24)==0) {
BitVector RPDUbits(strlen(message)*4);
if (!RPDUbits.unhex(message)) {
LOG(WARNING) << "Hex string parsing failed (in incoming SIP MESSAGE)";
throw UnexpectedMessage();
}
try {
RLFrame RPDU(RPDUbits);
LOG(DEBUG) << "SMS RPDU: " << RPDU;
rp_data.parse(RPDU);
LOG(DEBUG) << "SMS RP-DATA " << rp_data;
}
catch (SMSReadError) {
LOG(WARNING) << "SMS parsing failed (above L3)";
// Cause 95, "semantically incorrect message".
LCH->send(CPData(L3TI,RPError(95,reference)),3);
throw UnexpectedMessage();
}
catch (GSM::L3ReadError) {
LOG(WARNING) << "SMS parsing failed (in L3)";
// TODO:: send error back to the phone
throw UnsupportedMessage();
}
} else {
LOG(WARNING) << "Unsupported content type (in incoming SIP MESSAGE) -- type: " << contentType;
throw UnexpectedMessage();
}
CPData deliver(L3TI,rp_data);
#endif
// Start ABM in SAP3.
//LCH->send(GSM::ESTABLISH,3);
// Wait for SAP3 ABM to connect.
// The next read on SAP3 should the ESTABLISH primitive.
// This won't return NULL. It will throw an exception if it fails.
//delete getFrameSMS(LCH,GSM::ESTABLISH);
LOG(INFO) << "sending " << deliver;
LCH->send(deliver,3);
// Step 2
// Get the CP-ACK.
// FIXME -- Check TI.
LOG(DEBUG) << "MTSMS: waiting for CP-ACK";
GSM::L3Frame *CM = getFrameSMS(LCH);
LOG(DEBUG) << "MTSMS: ack from MS " << *CM;
if (CM->MTI()!=CPMessage::ACK) {
LOG(WARNING) << "MS rejected our RP-DATA with CP message with TI=" << CM->MTI();
delete CM;
throw UnexpectedMessage();
}
delete CM;
// Step 3
// Get CP-DATA containing RP-ACK and message reference.
LOG(DEBUG) << "MTSMS: waiting for RP-ACK";
CM = getFrameSMS(LCH);
LOG(DEBUG) << "MTSMS: data from MS " << *CM;
if (CM->MTI()!=CPMessage::DATA) {
LOG(NOTICE) << "Unexpected SMS CP message with TI=" << CM->MTI();
delete CM;
throw UnexpectedMessage();
}
// FIXME -- Check L3 TI.
// Parse to check for RP-ACK.
CPData data;
try {
data.parse(*CM);
LOG(DEBUG) << "CPData " << data;
}
catch (SMSReadError) {
LOG(WARNING) << "SMS parsing failed (above L3)";
// Cause 95, "semantically incorrect message".
LCH->send(CPError(L3TI,95),3);
throw UnexpectedMessage();
}
catch (GSM::L3ReadError) {
LOG(WARNING) << "SMS parsing failed (in L3)";
throw UnsupportedMessage();
}
delete CM;
// FIXME -- Check SMS reference.
bool success = true;
if (data.RPDU().MTI()!=RPMessage::Ack) {
LOG(WARNING) << "unexpected RPDU " << data.RPDU();
success = false;
}
// Step 4
// Send CP-ACK to the MS.
LOG(INFO) << "MTSMS: sending CPAck";
LCH->send(CPAck(L3TI),3);
return success;
}
void Control::InCallMOSMSController(const CPData *cpData, TransactionEntry* transaction, UMTS::DCCHLogicalChannel *LCH)
{
LOG(INFO) << *cpData;
// FIXME -- We know this will be broken in UMTS.
// Step 1 already happened in the SACCH service loop.
// Just get the L3 TI and set the high bit since it originated in the MS.
unsigned L3TI = cpData->TI() | 0x08;
transaction->L3TI(L3TI);
// Step 2
// Respond with CP-ACK.
// This just means that we got the message.
LOG(INFO) << "sending CPAck";
LCH->send(CPAck(L3TI),3);
// Parse the message in CM and process RP part.
// This is where we actually parse the message and send it out.
// FIXME -- We need to set the message ref correctly,
// even if the parsing fails.
// The compiler gives a warning here. Let it. It will remind someone to fix it.
unsigned ref;
bool success = false;
try {
CPData data;
data.parse(*cpData);
LOG(INFO) << "CPData " << data;
// Transfer out the RPDU -> TPDU -> delivery.
ref = data.RPDU().reference();
// This handler invokes higher-layer parsers, too.
success = handleRPDU(transaction,data.RPDU());
}
catch (SMSReadError) {
LOG(WARNING) << "SMS parsing failed (above L3)";
// Cause 95, "semantically incorrect message".
LCH->send(CPData(L3TI,RPError(95,ref)),3);
throw UnexpectedMessage(transaction->ID());
}
catch (GSM::L3ReadError) {
LOG(WARNING) << "SMS parsing failed (in L3)";
throw UnsupportedMessage(transaction->ID());
}
// Step 3
// Send CP-DATA containing RP-ACK and message reference.
if (success) {
LOG(INFO) << "sending RPAck in CPData";
LCH->send(CPData(L3TI,RPAck(ref)),3);
} else {
LOG(INFO) << "sending RPError in CPData";
// Cause 127 is "internetworking error, unspecified".
// See GSM 04.11 Table 8.4.
LCH->send(CPData(L3TI,RPError(127,ref)),3);
}
// Step 4
// Get CP-ACK from the MS.
GSM::L3Frame* CM = getFrameSMS(LCH);
if (CM->MTI()!=CPMessage::ACK) {
LOG(NOTICE) << "unexpected SMS CP message with MTI=" << CM->MTI() << " " << *CM;
throw UnexpectedMessage(transaction->ID());
}
LOG(DEBUG) << "ack from MS: " << *CM;
CPAck ack;
ack.parse(*CM);
LOG(INFO) << "CPAck " << ack;
gTransactionTable.remove(transaction);
}