/**
* A function called when the window gets focus.
*
* This function gets called on a focus event. It figures out how much
* time is required for a transition, and the number of steps that'll take,
* and sets up the _trans_timer function to do the work. If the transition
* time is set to 0 ms it just calls _trans_timer once with _steps equal to
* zero so that the transition happens instantaneously. This occurs on
* windows as opacity changes cause flicker there.
*/
void FloatingBehavior::_focus_event (void)
{
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
_steps = 0;
_trans_focus = prefs->getDoubleLimited("/dialogs/transparency/on-focus", 0.95, 0.0, 1.0);
_trans_blur = prefs->getDoubleLimited("/dialogs/transparency/on-blur", 0.50, 0.0, 1.0);
_trans_time = prefs->getIntLimited("/dialogs/transparency/animate-time", 100, 0, 5000);
if (_trans_time != 0) {
float diff = _trans_focus - _trans_blur;
if (diff < 0.0) diff *= -1.0;
while (diff > 0.05) {
_steps++;
diff = diff / 2.0;
}
if (_steps != 0) {
Glib::signal_timeout().connect(sigc::mem_fun(this, &FloatingBehavior::_trans_timer), _trans_time / _steps);
}
}
_trans_timer();
return;
}
static void
interpolate(SPPencilContext *pc)
{
g_assert( pc->ps.size() > 1 );
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
double const tol = prefs->getDoubleLimited("/tools/freehand/pencil/tolerance", 10.0, 1.0, 100.0) * 0.4;
double const tolerance_sq = 0.02 * square( pc->desktop->w2d().descrim() *
tol) * exp(0.2*tol - 2);
g_assert(is_zero(pc->req_tangent)
|| is_unit_vector(pc->req_tangent));
Geom::Point const tHatEnd(0, 0);
guint n_points = pc->ps.size();
pc->green_curve->reset();
pc->red_curve->reset();
pc->red_curve_is_valid = false;
Geom::Point * b = g_new(Geom::Point, 4*n_points);
Geom::Point * points = g_new(Geom::Point, 4*n_points);
for (unsigned int i = 0; i < pc->ps.size(); i++) {
points[i] = pc->ps[i];
}
// worst case gives us a segment per point
int max_segs = 4*n_points;
int const n_segs = Geom::bezier_fit_cubic_r(b, points, n_points,
tolerance_sq, max_segs);
if ( n_segs > 0)
{
/* Fit and draw and reset state */
pc->green_curve->moveto(b[0]);
for (int c = 0; c < n_segs; c++) {
pc->green_curve->curveto(b[4*c+1], b[4*c+2], b[4*c+3]);
}
sp_canvas_bpath_set_bpath(SP_CANVAS_BPATH(pc->red_bpath), pc->green_curve);
/* Fit and draw and copy last point */
g_assert(!pc->green_curve->is_empty());
/* Set up direction of next curve. */
{
Geom::CubicBezier const * last_seg = dynamic_cast<Geom::CubicBezier const *>(pc->green_curve->last_segment());
g_assert( last_seg ); // Relevance: validity of (*last_seg)[2]
pc->p[0] = last_seg->finalPoint();
pc->npoints = 1;
Geom::Point const req_vec( pc->p[0] - (*last_seg)[2] );
pc->req_tangent = ( ( Geom::is_zero(req_vec) || !in_svg_plane(req_vec) )
? Geom::Point(0, 0)
: Geom::unit_vector(req_vec) );
}
}
g_free(b);
g_free(points);
pc->ps.clear();
}
static void sp_pencil_tb_tolerance_value_changed(GtkAdjustment *adj, GObject *tbl)
{
// quit if run by the attr_changed listener
if (g_object_get_data( tbl, "freeze" )) {
return;
}
// in turn, prevent listener from responding
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
g_object_set_data( tbl, "freeze", GINT_TO_POINTER(TRUE) );
prefs->setDouble("/tools/freehand/pencil/tolerance",
gtk_adjustment_get_value(adj));
g_object_set_data( tbl, "freeze", GINT_TO_POINTER(FALSE) );
SPDesktop *desktop = static_cast<SPDesktop *>(g_object_get_data(tbl, "desktop"));
std::vector<SPItem *> selected = desktop->getSelection()->itemList();
for (std::vector<SPItem *>::iterator it(selected.begin()); it != selected.end(); ++it){
SPLPEItem* lpeitem = dynamic_cast<SPLPEItem*>(*it);
if (lpeitem && lpeitem->hasPathEffect()){
Inkscape::LivePathEffect::Effect* simplify = lpeitem->getPathEffectOfType(Inkscape::LivePathEffect::SIMPLIFY);
if(simplify){
Inkscape::LivePathEffect::LPESimplify *lpe_simplify = dynamic_cast<Inkscape::LivePathEffect::LPESimplify*>(simplify->getLPEObj()->get_lpe());
if (lpe_simplify) {
double tol = prefs->getDoubleLimited("/tools/freehand/pencil/tolerance", 10.0, 1.0, 100.0);
tol = tol/(100.0*(102.0-tol));
std::ostringstream ss;
ss << tol;
Inkscape::LivePathEffect::Effect* powerstroke = lpeitem->getPathEffectOfType(Inkscape::LivePathEffect::POWERSTROKE);
bool simplified = false;
if(powerstroke){
Inkscape::LivePathEffect::LPEPowerStroke *lpe_powerstroke = dynamic_cast<Inkscape::LivePathEffect::LPEPowerStroke*>(powerstroke->getLPEObj()->get_lpe());
if(lpe_powerstroke){
lpe_powerstroke->getRepr()->setAttribute("is_visible", "false");
sp_lpe_item_update_patheffect(lpeitem, false, false);
SPShape *sp_shape = dynamic_cast<SPShape *>(lpeitem);
if (sp_shape) {
guint previous_curve_length = sp_shape->getCurve()->get_segment_count();
lpe_simplify->getRepr()->setAttribute("threshold", ss.str());
sp_lpe_item_update_patheffect(lpeitem, false, false);
simplified = true;
guint curve_length = sp_shape->getCurve()->get_segment_count();
std::vector<Geom::Point> ts = lpe_powerstroke->offset_points.data();
double factor = (double)curve_length/ (double)previous_curve_length;
for (size_t i = 0; i < ts.size(); i++) {
ts[i][Geom::X] = ts[i][Geom::X] * factor;
}
lpe_powerstroke->offset_points.param_setValue(ts);
}
lpe_powerstroke->getRepr()->setAttribute("is_visible", "true");
sp_lpe_item_update_patheffect(lpeitem, false, false);
}
}
if(!simplified){
lpe_simplify->getRepr()->setAttribute("threshold", ss.str());
}
}
}
}
}
}
bool ZoomTool::root_handler(GdkEvent* event) {
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
tolerance = prefs->getIntLimited("/options/dragtolerance/value", 0, 0, 100);
double const zoom_inc = prefs->getDoubleLimited("/options/zoomincrement/value", M_SQRT2, 1.01, 10);
bool ret = false;
switch (event->type) {
case GDK_BUTTON_PRESS:
{
Geom::Point const button_w(event->button.x, event->button.y);
Geom::Point const button_dt(desktop->w2d(button_w));
if (event->button.button == 1 && !this->space_panning) {
// save drag origin
xp = (gint) event->button.x;
yp = (gint) event->button.y;
within_tolerance = true;
Inkscape::Rubberband::get(desktop)->start(desktop, button_dt);
escaped = false;
ret = true;
} else if (event->button.button == 3) {
double const zoom_rel( (event->button.state & GDK_SHIFT_MASK)
? zoom_inc
: 1 / zoom_inc );
desktop->zoom_relative_keep_point(button_dt, zoom_rel);
ret = true;
}
sp_canvas_item_grab(SP_CANVAS_ITEM(desktop->acetate),
GDK_KEY_PRESS_MASK | GDK_KEY_RELEASE_MASK | GDK_BUTTON_RELEASE_MASK | GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK,
NULL, event->button.time);
this->grabbed = SP_CANVAS_ITEM(desktop->acetate);
break;
}
case GDK_MOTION_NOTIFY:
if ((event->motion.state & GDK_BUTTON1_MASK) && !this->space_panning) {
ret = true;
if ( within_tolerance
&& ( abs( (gint) event->motion.x - xp ) < tolerance )
&& ( abs( (gint) event->motion.y - yp ) < tolerance ) ) {
break; // do not drag if we're within tolerance from origin
}
// Once the user has moved farther than tolerance from the original location
// (indicating they intend to move the object, not click), then always process the
// motion notify coordinates as given (no snapping back to origin)
within_tolerance = false;
Geom::Point const motion_w(event->motion.x, event->motion.y);
Geom::Point const motion_dt(desktop->w2d(motion_w));
Inkscape::Rubberband::get(desktop)->move(motion_dt);
gobble_motion_events(GDK_BUTTON1_MASK);
}
break;
case GDK_BUTTON_RELEASE:
{
Geom::Point const button_w(event->button.x, event->button.y);
Geom::Point const button_dt(desktop->w2d(button_w));
if ( event->button.button == 1 && !this->space_panning) {
Geom::OptRect const b = Inkscape::Rubberband::get(desktop)->getRectangle();
if (b && !within_tolerance) {
desktop->set_display_area(*b, 10);
} else if (!escaped) {
double const zoom_rel( (event->button.state & GDK_SHIFT_MASK)
? 1 / zoom_inc
: zoom_inc );
desktop->zoom_relative_keep_point(button_dt, zoom_rel);
}
ret = true;
}
Inkscape::Rubberband::get(desktop)->stop();
if (this->grabbed) {
sp_canvas_item_ungrab(this->grabbed, event->button.time);
this->grabbed = NULL;
}
xp = yp = 0;
escaped = false;
break;
}
case GDK_KEY_PRESS:
switch (get_group0_keyval (&event->key)) {
case GDK_KEY_Escape:
if (!Inkscape::Rubberband::get(desktop)->is_started()) {
Inkscape::SelectionHelper::selectNone(desktop);
}
Inkscape::Rubberband::get(desktop)->stop();
xp = yp = 0;
escaped = true;
ret = true;
break;
case GDK_KEY_Up:
case GDK_KEY_Down:
case GDK_KEY_KP_Up:
case GDK_KEY_KP_Down:
// prevent the zoom field from activation
if (!MOD__CTRL_ONLY(event))
ret = true;
break;
case GDK_KEY_Shift_L:
case GDK_KEY_Shift_R:
this->cursor_shape = cursor_zoom_out_xpm;
this->sp_event_context_update_cursor();
break;
case GDK_KEY_Delete:
case GDK_KEY_KP_Delete:
case GDK_KEY_BackSpace:
ret = this->deleteSelectedDrag(MOD__CTRL_ONLY(event));
break;
default:
break;
}
break;
case GDK_KEY_RELEASE:
switch (get_group0_keyval (&event->key)) {
case GDK_KEY_Shift_L:
case GDK_KEY_Shift_R:
this->cursor_shape = cursor_zoom_xpm;
this->sp_event_context_update_cursor();
break;
default:
break;
}
break;
default:
break;
}
if (!ret) {
ret = ToolBase::root_handler(event);
}
return ret;
}
static gint
sp_select_context_root_handler(SPEventContext *event_context, GdkEvent *event)
{
SPItem *item = NULL;
SPItem *item_at_point = NULL, *group_at_point = NULL, *item_in_group = NULL;
gint ret = FALSE;
SPDesktop *desktop = event_context->desktop;
SPSelectContext *sc = SP_SELECT_CONTEXT(event_context);
Inkscape::SelTrans *seltrans = sc->_seltrans;
Inkscape::Selection *selection = sp_desktop_selection(desktop);
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
// make sure we still have valid objects to move around
if (sc->item && SP_OBJECT_DOCUMENT( SP_OBJECT(sc->item))==NULL) {
sp_select_context_abort(event_context);
}
switch (event->type) {
case GDK_2BUTTON_PRESS:
if (event->button.button == 1) {
if (!selection->isEmpty()) {
SPItem *clicked_item = (SPItem *) selection->itemList()->data;
if (SP_IS_GROUP(clicked_item) && !SP_IS_BOX3D(clicked_item)) { // enter group if it's not a 3D box
desktop->setCurrentLayer(reinterpret_cast<SPObject *>(clicked_item));
sp_desktop_selection(desktop)->clear();
sc->dragging = false;
sp_event_context_discard_delayed_snap_event(event_context);
desktop->canvas->end_forced_full_redraws();
} else { // switch tool
Geom::Point const button_pt(event->button.x, event->button.y);
Geom::Point const p(desktop->w2d(button_pt));
tools_switch_by_item (desktop, clicked_item, p);
}
} else {
sp_select_context_up_one_layer(desktop);
}
ret = TRUE;
}
break;
case GDK_BUTTON_PRESS:
if (event->button.button == 1 && !event_context->space_panning) {
// save drag origin
xp = (gint) event->button.x;
yp = (gint) event->button.y;
within_tolerance = true;
Geom::Point const button_pt(event->button.x, event->button.y);
Geom::Point const p(desktop->w2d(button_pt));
if (event->button.state & GDK_MOD1_MASK)
Inkscape::Rubberband::get(desktop)->setMode(RUBBERBAND_MODE_TOUCHPATH);
Inkscape::Rubberband::get(desktop)->start(desktop, p);
if (sc->grabbed) {
sp_canvas_item_ungrab(sc->grabbed, event->button.time);
sc->grabbed = NULL;
}
sp_canvas_item_grab(SP_CANVAS_ITEM(desktop->acetate),
GDK_KEY_PRESS_MASK | GDK_KEY_RELEASE_MASK | GDK_BUTTON_RELEASE_MASK | GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK,
NULL, event->button.time);
sc->grabbed = SP_CANVAS_ITEM(desktop->acetate);
// remember what modifiers were on before button press
sc->button_press_shift = (event->button.state & GDK_SHIFT_MASK) ? true : false;
sc->button_press_ctrl = (event->button.state & GDK_CONTROL_MASK) ? true : false;
sc->button_press_alt = (event->button.state & GDK_MOD1_MASK) ? true : false;
sc->moved = FALSE;
rb_escaped = drag_escaped = 0;
ret = TRUE;
} else if (event->button.button == 3) {
// right click; do not eat it so that right-click menu can appear, but cancel dragging & rubberband
sp_select_context_abort(event_context);
}
break;
case GDK_MOTION_NOTIFY:
tolerance = prefs->getIntLimited("/options/dragtolerance/value", 0, 0, 100);
if (event->motion.state & GDK_BUTTON1_MASK && !event_context->space_panning) {
Geom::Point const motion_pt(event->motion.x, event->motion.y);
Geom::Point const p(desktop->w2d(motion_pt));
if ( within_tolerance
&& ( abs( (gint) event->motion.x - xp ) < tolerance )
&& ( abs( (gint) event->motion.y - yp ) < tolerance ) ) {
break; // do not drag if we're within tolerance from origin
}
// Once the user has moved farther than tolerance from the original location
// (indicating they intend to move the object, not click), then always process the
// motion notify coordinates as given (no snapping back to origin)
within_tolerance = false;
if (sc->button_press_ctrl || (sc->button_press_alt && !sc->button_press_shift && !selection->isEmpty())) {
// if it's not click and ctrl or alt was pressed (the latter with some selection
// but not with shift) we want to drag rather than rubberband
sc->dragging = TRUE;
desktop->setCursor(SP_SELECT_D_CURSOR);
desktop->canvas->force_full_redraw_after_interruptions(5);
}
if (sc->dragging) {
/* User has dragged fast, so we get events on root (lauris)*/
// not only that; we will end up here when ctrl-dragging as well
// and also when we started within tolerance, but trespassed tolerance outside of item
Inkscape::Rubberband::get(desktop)->stop();
SP_EVENT_CONTEXT(sc)->defaultMessageContext()->clear();
item_at_point = desktop->item_at_point(Geom::Point(event->button.x, event->button.y), FALSE);
if (!item_at_point) // if no item at this point, try at the click point (bug 1012200)
item_at_point = desktop->item_at_point(Geom::Point(xp, yp), FALSE);
if (item_at_point || sc->moved || sc->button_press_alt) {
// drag only if starting from an item, or if something is already grabbed, or if alt-dragging
if (!sc->moved) {
item_in_group = desktop->item_at_point(Geom::Point(event->button.x, event->button.y), TRUE);
group_at_point = desktop->group_at_point(Geom::Point(event->button.x, event->button.y));
if (SP_IS_LAYER(selection->single()))
group_at_point = SP_GROUP(selection->single());
// group-at-point is meant to be topmost item if it's a group,
// not topmost group of all items at point
if (group_at_point != item_in_group &&
!(group_at_point && item_at_point &&
group_at_point->isAncestorOf(item_at_point)))
group_at_point = NULL;
// if neither a group nor an item (possibly in a group) at point are selected, set selection to the item at point
if ((!item_in_group || !selection->includes(item_in_group)) &&
(!group_at_point || !selection->includes(group_at_point))
&& !sc->button_press_alt) {
// select what is under cursor
if (!seltrans->isEmpty()) {
seltrans->resetState();
}
// when simply ctrl-dragging, we don't want to go into groups
if (item_at_point && !selection->includes(item_at_point))
selection->set(item_at_point);
} // otherwise, do not change selection so that dragging selected-within-group items, as well as alt-dragging, is possible
seltrans->grab(p, -1, -1, FALSE, TRUE);
sc->moved = TRUE;
}
if (!seltrans->isEmpty())
seltrans->moveTo(p, event->button.state);
desktop->scroll_to_point(p);
gobble_motion_events(GDK_BUTTON1_MASK);
ret = TRUE;
} else {
sc->dragging = FALSE;
sp_event_context_discard_delayed_snap_event(event_context);
desktop->canvas->end_forced_full_redraws();
}
} else {
if (Inkscape::Rubberband::get(desktop)->is_started()) {
Inkscape::Rubberband::get(desktop)->move(p);
if (Inkscape::Rubberband::get(desktop)->getMode() == RUBBERBAND_MODE_TOUCHPATH) {
event_context->defaultMessageContext()->set(Inkscape::NORMAL_MESSAGE, _("<b>Draw over</b> objects to select them; release <b>Alt</b> to switch to rubberband selection"));
} else {
event_context->defaultMessageContext()->set(Inkscape::NORMAL_MESSAGE, _("<b>Drag around</b> objects to select them; press <b>Alt</b> to switch to touch selection"));
}
gobble_motion_events(GDK_BUTTON1_MASK);
}
}
}
break;
case GDK_BUTTON_RELEASE:
xp = yp = 0;
if ((event->button.button == 1) && (sc->grabbed) && !event_context->space_panning) {
if (sc->dragging) {
if (sc->moved) {
// item has been moved
seltrans->ungrab();
sc->moved = FALSE;
} else if (sc->item && !drag_escaped) {
// item has not been moved -> simply a click, do selecting
if (!selection->isEmpty()) {
if (event->button.state & GDK_SHIFT_MASK) {
// with shift, toggle selection
seltrans->resetState();
selection->toggle(sc->item);
} else {
SPObject* single = selection->single();
// without shift, increase state (i.e. toggle scale/rotation handles)
if (selection->includes(sc->item)) {
seltrans->increaseState();
} else if (SP_IS_LAYER(single) && single->isAncestorOf(sc->item)) {
seltrans->increaseState();
} else {
seltrans->resetState();
selection->set(sc->item);
}
}
} else { // simple or shift click, no previous selection
seltrans->resetState();
selection->set(sc->item);
}
}
sc->dragging = FALSE;
desktop->setCursor(SP_SELECT_CURSOR);
sp_event_context_discard_delayed_snap_event(event_context);
desktop->canvas->end_forced_full_redraws();
if (sc->item) {
sp_object_unref( SP_OBJECT(sc->item), NULL);
}
sc->item = NULL;
} else {
Inkscape::Rubberband *r = Inkscape::Rubberband::get(desktop);
if (r->is_started() && !within_tolerance) {
// this was a rubberband drag
GSList *items = NULL;
if (r->getMode() == RUBBERBAND_MODE_RECT) {
Geom::OptRect const b = r->getRectangle();
items = sp_document_items_in_box(sp_desktop_document(desktop), desktop->dkey, *b);
} else if (r->getMode() == RUBBERBAND_MODE_TOUCHPATH) {
items = sp_document_items_at_points(sp_desktop_document(desktop), desktop->dkey, r->getPoints());
}
seltrans->resetState();
r->stop();
SP_EVENT_CONTEXT(sc)->defaultMessageContext()->clear();
if (event->button.state & GDK_SHIFT_MASK) {
// with shift, add to selection
selection->addList (items);
} else {
// without shift, simply select anew
selection->setList (items);
}
g_slist_free (items);
} else { // it was just a click, or a too small rubberband
r->stop();
if (sc->button_press_shift && !rb_escaped && !drag_escaped) {
// this was a shift+click or alt+shift+click, select what was clicked upon
sc->button_press_shift = false;
if (sc->button_press_ctrl) {
// go into groups, honoring Alt
item = sp_event_context_find_item (desktop,
Geom::Point(event->button.x, event->button.y), event->button.state & GDK_MOD1_MASK, TRUE);
sc->button_press_ctrl = FALSE;
} else {
// don't go into groups, honoring Alt
item = sp_event_context_find_item (desktop,
Geom::Point(event->button.x, event->button.y), event->button.state & GDK_MOD1_MASK, FALSE);
}
if (item) {
selection->toggle(item);
item = NULL;
}
} else if ((sc->button_press_ctrl || sc->button_press_alt) && !rb_escaped && !drag_escaped) { // ctrl+click, alt+click
item = sp_event_context_find_item (desktop,
Geom::Point(event->button.x, event->button.y), sc->button_press_alt, sc->button_press_ctrl);
sc->button_press_ctrl = FALSE;
sc->button_press_alt = FALSE;
if (item) {
if (selection->includes(item)) {
seltrans->increaseState();
} else {
seltrans->resetState();
selection->set(item);
}
item = NULL;
}
} else { // click without shift, simply deselect, unless with Alt or something was cancelled
if (!selection->isEmpty()) {
if (!(rb_escaped) && !(drag_escaped) && !(event->button.state & GDK_MOD1_MASK))
selection->clear();
rb_escaped = 0;
ret = TRUE;
}
}
}
ret = TRUE;
}
if (sc->grabbed) {
sp_canvas_item_ungrab(sc->grabbed, event->button.time);
sc->grabbed = NULL;
}
desktop->updateNow();
}
if (event->button.button == 1) {
Inkscape::Rubberband::get(desktop)->stop(); // might have been started in another tool!
}
sc->button_press_shift = false;
sc->button_press_ctrl = false;
sc->button_press_alt = false;
break;
case GDK_KEY_PRESS: // keybindings for select context
{
{
guint keyval = get_group0_keyval(&event->key);
bool alt = ( MOD__ALT
|| (keyval == GDK_Alt_L)
|| (keyval == GDK_Alt_R)
|| (keyval == GDK_Meta_L)
|| (keyval == GDK_Meta_R));
if (!key_is_a_modifier (keyval)) {
event_context->defaultMessageContext()->clear();
} else if (sc->grabbed || seltrans->isGrabbed()) {
if (Inkscape::Rubberband::get(desktop)->is_started()) {
// if Alt then change cursor to moving cursor:
if (alt) {
Inkscape::Rubberband::get(desktop)->setMode(RUBBERBAND_MODE_TOUCHPATH);
}
} else {
// do not change the statusbar text when mousekey is down to move or transform the object,
// because the statusbar text is already updated somewhere else.
break;
}
} else {
sp_event_show_modifier_tip (event_context->defaultMessageContext(), event,
_("<b>Ctrl</b>: click to select in groups; drag to move hor/vert"),
_("<b>Shift</b>: click to toggle select; drag for rubberband selection"),
_("<b>Alt</b>: click to select under; drag to move selected or select by touch"));
// if Alt and nonempty selection, show moving cursor ("move selected"):
if (alt && !selection->isEmpty() && !desktop->isWaitingCursor()) {
desktop->setCursor(SP_SELECT_D_CURSOR);
}
//*/
break;
}
}
gdouble const nudge = prefs->getDoubleLimited("/options/nudgedistance/value", 2, 0, 1000); // in px
gdouble const offset = prefs->getDoubleLimited("/options/defaultscale/value", 2, 0, 1000);
int const snaps = prefs->getInt("/options/rotationsnapsperpi/value", 12);
switch (get_group0_keyval (&event->key)) {
case GDK_Left: // move selection left
case GDK_KP_Left:
case GDK_KP_4:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) sp_selection_move_screen(desktop, mul*-10, 0); // shift
else sp_selection_move_screen(desktop, mul*-1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) sp_selection_move(desktop, mul*-10*nudge, 0); // shift
else sp_selection_move(desktop, mul*-nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_Up: // move selection up
case GDK_KP_Up:
case GDK_KP_8:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) sp_selection_move_screen(desktop, 0, mul*10); // shift
else sp_selection_move_screen(desktop, 0, mul*1); // no shift
}
else { // no alt
if (MOD__SHIFT) sp_selection_move(desktop, 0, mul*10*nudge); // shift
else sp_selection_move(desktop, 0, mul*nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_Right: // move selection right
case GDK_KP_Right:
case GDK_KP_6:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) sp_selection_move_screen(desktop, mul*10, 0); // shift
else sp_selection_move_screen(desktop, mul*1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) sp_selection_move(desktop, mul*10*nudge, 0); // shift
else sp_selection_move(desktop, mul*nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_Down: // move selection down
case GDK_KP_Down:
case GDK_KP_2:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) sp_selection_move_screen(desktop, 0, mul*-10); // shift
else sp_selection_move_screen(desktop, 0, mul*-1); // no shift
}
else { // no alt
if (MOD__SHIFT) sp_selection_move(desktop, 0, mul*-10*nudge); // shift
else sp_selection_move(desktop, 0, mul*-nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_Escape:
if (!sp_select_context_abort(event_context))
selection->clear();
ret = TRUE;
break;
case GDK_a:
case GDK_A:
if (MOD__CTRL_ONLY) {
sp_edit_select_all(desktop);
ret = TRUE;
}
break;
case GDK_space:
/* stamping mode: show outline mode moving */
/* FIXME: Is next condition ok? (lauris) */
if (sc->dragging && sc->grabbed) {
seltrans->stamp();
ret = TRUE;
}
break;
case GDK_x:
case GDK_X:
if (MOD__ALT_ONLY) {
desktop->setToolboxFocusTo ("altx");
ret = TRUE;
}
break;
case GDK_bracketleft:
if (MOD__ALT) {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_rotate_screen(selection, mul*1);
} else if (MOD__CTRL) {
sp_selection_rotate(selection, 90);
} else if (snaps) {
sp_selection_rotate(selection, 180.0/snaps);
}
ret = TRUE;
break;
case GDK_bracketright:
if (MOD__ALT) {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_rotate_screen(selection, -1*mul);
} else if (MOD__CTRL) {
sp_selection_rotate(selection, -90);
} else if (snaps) {
sp_selection_rotate(selection, -180.0/snaps);
}
ret = TRUE;
break;
case GDK_less:
case GDK_comma:
if (MOD__ALT) {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_scale_screen(selection, -2*mul);
} else if (MOD__CTRL) {
sp_selection_scale_times(selection, 0.5);
} else {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_scale(selection, -offset*mul);
}
ret = TRUE;
break;
case GDK_greater:
case GDK_period:
if (MOD__ALT) {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_scale_screen(selection, 2*mul);
} else if (MOD__CTRL) {
sp_selection_scale_times(selection, 2);
} else {
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
sp_selection_scale(selection, offset*mul);
}
ret = TRUE;
break;
case GDK_Return:
if (MOD__CTRL_ONLY) {
if (selection->singleItem()) {
SPItem *clicked_item = selection->singleItem();
if ( SP_IS_GROUP(clicked_item) ||
SP_IS_BOX3D(clicked_item)) { // enter group or a 3D box
desktop->setCurrentLayer(reinterpret_cast<SPObject *>(clicked_item));
sp_desktop_selection(desktop)->clear();
} else {
SP_EVENT_CONTEXT(sc)->desktop->messageStack()->flash(Inkscape::NORMAL_MESSAGE, _("Selected object is not a group. Cannot enter."));
}
}
ret = TRUE;
}
break;
case GDK_BackSpace:
if (MOD__CTRL_ONLY) {
sp_select_context_up_one_layer(desktop);
ret = TRUE;
}
break;
case GDK_s:
case GDK_S:
if (MOD__SHIFT_ONLY) {
if (!selection->isEmpty()) {
seltrans->increaseState();
}
ret = TRUE;
}
break;
case GDK_g:
case GDK_G:
if (MOD__SHIFT_ONLY) {
sp_selection_to_guides(desktop);
ret = true;
}
break;
default:
break;
}
break;
}
case GDK_KEY_RELEASE:
{
guint keyval = get_group0_keyval(&event->key);
if (key_is_a_modifier (keyval))
event_context->defaultMessageContext()->clear();
bool alt = ( MOD__ALT
|| (keyval == GDK_Alt_L)
|| (keyval == GDK_Alt_R)
|| (keyval == GDK_Meta_L)
|| (keyval == GDK_Meta_R));
if (Inkscape::Rubberband::get(desktop)->is_started()) {
// if Alt then change cursor to moving cursor:
if (alt) {
Inkscape::Rubberband::get(desktop)->setMode(RUBBERBAND_MODE_RECT);
}
}
}
// set cursor to default.
if (!desktop->isWaitingCursor()) {
desktop->setCursor(event_context->cursor_shape);
}
break;
default:
break;
}
if (!ret) {
if (((SPEventContextClass *) parent_class)->root_handler)
ret = ((SPEventContextClass *) parent_class)->root_handler(event_context, event);
}
return ret;
}
static gint
sp_gradient_context_root_handler(SPEventContext *event_context, GdkEvent *event)
{
static bool dragging;
SPDesktop *desktop = event_context->desktop;
Inkscape::Selection *selection = sp_desktop_selection (desktop);
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
SPGradientContext *rc = SP_GRADIENT_CONTEXT(event_context);
event_context->tolerance = prefs->getIntLimited("/options/dragtolerance/value", 0, 0, 100);
double const nudge = prefs->getDoubleLimited("/options/nudgedistance/value", 2, 0, 1000); // in px
GrDrag *drag = event_context->_grdrag;
g_assert (drag);
gint ret = FALSE;
switch (event->type) {
case GDK_2BUTTON_PRESS:
if ( event->button.button == 1 ) {
bool over_line = false;
SPCtrlLine *line = NULL;
if (drag->lines) {
for (GSList *l = drag->lines; (l != NULL) && (!over_line); l = l->next) {
line = (SPCtrlLine*) l->data;
over_line |= sp_gradient_context_is_over_line (rc, (SPItem*) line, Geom::Point(event->motion.x, event->motion.y));
}
}
if (over_line) {
// we take the first item in selection, because with doubleclick, the first click
// always resets selection to the single object under cursor
sp_gradient_context_add_stop_near_point(rc, SP_ITEM(selection->itemList()->data), rc->mousepoint_doc, event->button.time);
} else {
for (GSList const* i = selection->itemList(); i != NULL; i = i->next) {
SPItem *item = SP_ITEM(i->data);
SPGradientType new_type = (SPGradientType) prefs->getInt("/tools/gradient/newgradient", SP_GRADIENT_TYPE_LINEAR);
guint new_fill = prefs->getInt("/tools/gradient/newfillorstroke", 1);
SPGradient *vector = sp_gradient_vector_for_object(sp_desktop_document(desktop), desktop, SP_OBJECT (item), new_fill);
SPGradient *priv = sp_item_set_gradient(item, vector, new_type, new_fill);
sp_gradient_reset_to_userspace(priv, item);
}
sp_document_done (sp_desktop_document (desktop), SP_VERB_CONTEXT_GRADIENT,
_("Create default gradient"));
}
ret = TRUE;
}
break;
case GDK_BUTTON_PRESS:
if ( event->button.button == 1 && !event_context->space_panning ) {
Geom::Point button_w(event->button.x, event->button.y);
// save drag origin
event_context->xp = (gint) button_w[Geom::X];
event_context->yp = (gint) button_w[Geom::Y];
event_context->within_tolerance = true;
dragging = true;
Geom::Point button_dt = to_2geom(desktop->w2d(button_w));
if (event->button.state & GDK_SHIFT_MASK) {
Inkscape::Rubberband::get(desktop)->start(desktop, from_2geom(button_dt));
} else {
// remember clicked item, disregarding groups, honoring Alt; do nothing with Crtl to
// enable Ctrl+doubleclick of exactly the selected item(s)
if (!(event->button.state & GDK_CONTROL_MASK))
event_context->item_to_select = sp_event_context_find_item (desktop, button_w, event->button.state & GDK_MOD1_MASK, TRUE);
/* Snap center to nearest magnetic point */
SnapManager &m = desktop->namedview->snap_manager;
m.setup(desktop);
m.freeSnapReturnByRef(Inkscape::SnapPreferences::SNAPPOINT_NODE, button_dt);
rc->origin = from_2geom(button_dt);
}
ret = TRUE;
}
break;
case GDK_MOTION_NOTIFY:
if ( dragging
&& ( event->motion.state & GDK_BUTTON1_MASK ) && !event_context->space_panning )
{
if ( event_context->within_tolerance
&& ( abs( (gint) event->motion.x - event_context->xp ) < event_context->tolerance )
&& ( abs( (gint) event->motion.y - event_context->yp ) < event_context->tolerance ) ) {
break; // do not drag if we're within tolerance from origin
}
// Once the user has moved farther than tolerance from the original location
// (indicating they intend to draw, not click), then always process the
// motion notify coordinates as given (no snapping back to origin)
event_context->within_tolerance = false;
Geom::Point const motion_w(event->motion.x,
event->motion.y);
Geom::Point const motion_dt = event_context->desktop->w2d(motion_w);
if (Inkscape::Rubberband::get(desktop)->is_started()) {
Inkscape::Rubberband::get(desktop)->move(motion_dt);
event_context->defaultMessageContext()->set(Inkscape::NORMAL_MESSAGE, _("<b>Draw around</b> handles to select them"));
} else {
sp_gradient_drag(*rc, motion_dt, event->motion.state, event->motion.time);
}
gobble_motion_events(GDK_BUTTON1_MASK);
ret = TRUE;
} else {
bool over_line = false;
if (drag->lines) {
for (GSList *l = drag->lines; l != NULL; l = l->next) {
over_line |= sp_gradient_context_is_over_line (rc, (SPItem*) l->data, Geom::Point(event->motion.x, event->motion.y));
}
}
if (rc->cursor_addnode && !over_line) {
event_context->cursor_shape = cursor_gradient_xpm;
sp_event_context_update_cursor(event_context);
rc->cursor_addnode = false;
} else if (!rc->cursor_addnode && over_line) {
event_context->cursor_shape = cursor_gradient_add_xpm;
sp_event_context_update_cursor(event_context);
rc->cursor_addnode = true;
}
}
break;
case GDK_BUTTON_RELEASE:
event_context->xp = event_context->yp = 0;
if ( event->button.button == 1 && !event_context->space_panning ) {
if ( (event->button.state & GDK_CONTROL_MASK) && (event->button.state & GDK_MOD1_MASK ) ) {
bool over_line = false;
SPCtrlLine *line = NULL;
if (drag->lines) {
for (GSList *l = drag->lines; (l != NULL) && (!over_line); l = l->next) {
line = (SPCtrlLine*) l->data;
over_line = sp_gradient_context_is_over_line (rc, (SPItem*) line, Geom::Point(event->motion.x, event->motion.y));
if (over_line)
break;
}
}
if (over_line && line) {
sp_gradient_context_add_stop_near_point(rc, line->item, rc->mousepoint_doc, 0);
ret = TRUE;
}
} else {
dragging = false;
// unless clicked with Ctrl (to enable Ctrl+doubleclick).
if (event->button.state & GDK_CONTROL_MASK) {
ret = TRUE;
break;
}
if (!event_context->within_tolerance) {
// we've been dragging, either do nothing (grdrag handles that),
// or rubberband-select if we have rubberband
Inkscape::Rubberband::Rubberband *r = Inkscape::Rubberband::get(desktop);
if (r->is_started() && !event_context->within_tolerance) {
// this was a rubberband drag
if (r->getMode() == RUBBERBAND_MODE_RECT) {
Geom::OptRect const b = r->getRectangle();
drag->selectRect(*b);
}
}
} else if (event_context->item_to_select) {
// no dragging, select clicked item if any
if (event->button.state & GDK_SHIFT_MASK) {
selection->toggle(event_context->item_to_select);
} else {
selection->set(event_context->item_to_select);
}
} else {
// click in an empty space; do the same as Esc
if (drag->selected) {
drag->deselectAll();
} else {
selection->clear();
}
}
event_context->item_to_select = NULL;
ret = TRUE;
}
Inkscape::Rubberband::get(desktop)->stop();
}
break;
case GDK_KEY_PRESS:
switch (get_group0_keyval (&event->key)) {
case GDK_Alt_L:
case GDK_Alt_R:
case GDK_Control_L:
case GDK_Control_R:
case GDK_Shift_L:
case GDK_Shift_R:
case GDK_Meta_L: // Meta is when you press Shift+Alt (at least on my machine)
case GDK_Meta_R:
sp_event_show_modifier_tip (event_context->defaultMessageContext(), event,
_("<b>Ctrl</b>: snap gradient angle"),
_("<b>Shift</b>: draw gradient around the starting point"),
NULL);
break;
case GDK_x:
case GDK_X:
if (MOD__ALT_ONLY) {
desktop->setToolboxFocusTo ("altx-grad");
ret = TRUE;
}
break;
case GDK_A:
case GDK_a:
if (MOD__CTRL_ONLY && drag->isNonEmpty()) {
drag->selectAll();
ret = TRUE;
}
break;
case GDK_L:
case GDK_l:
if (MOD__CTRL_ONLY && drag->isNonEmpty() && drag->hasSelection()) {
sp_gradient_simplify(rc, 1e-4);
ret = TRUE;
}
break;
case GDK_Escape:
if (drag->selected) {
drag->deselectAll();
} else {
selection->clear();
}
ret = TRUE;
//TODO: make dragging escapable by Esc
break;
case GDK_Left: // move handle left
case GDK_KP_Left:
case GDK_KP_4:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(mul*-10, 0); // shift
else drag->selected_move_screen(mul*-1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(mul*-10*nudge, 0); // shift
else drag->selected_move(mul*-nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_Up: // move handle up
case GDK_KP_Up:
case GDK_KP_8:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(0, mul*10); // shift
else drag->selected_move_screen(0, mul*1); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(0, mul*10*nudge); // shift
else drag->selected_move(0, mul*nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_Right: // move handle right
case GDK_KP_Right:
case GDK_KP_6:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(mul*10, 0); // shift
else drag->selected_move_screen(mul*1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(mul*10*nudge, 0); // shift
else drag->selected_move(mul*nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_Down: // move handle down
case GDK_KP_Down:
case GDK_KP_2:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(0, mul*-10); // shift
else drag->selected_move_screen(0, mul*-1); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(0, mul*-10*nudge); // shift
else drag->selected_move(0, mul*-nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_r:
case GDK_R:
if (MOD__SHIFT_ONLY) {
// First try selected dragger
if (drag && drag->selected) {
drag->selected_reverse_vector();
} else { // If no drag or no dragger selected, act on selection (both fill and stroke gradients)
for (GSList const* i = selection->itemList(); i != NULL; i = i->next) {
sp_item_gradient_reverse_vector (SP_ITEM(i->data), true);
sp_item_gradient_reverse_vector (SP_ITEM(i->data), false);
}
}
// we did an undoable action
sp_document_done (sp_desktop_document (desktop), SP_VERB_CONTEXT_GRADIENT,
_("Invert gradient"));
ret = TRUE;
}
break;
case GDK_Insert:
case GDK_KP_Insert:
// with any modifiers:
sp_gradient_context_add_stops_between_selected_stops (rc);
ret = TRUE;
break;
case GDK_Delete:
case GDK_KP_Delete:
case GDK_BackSpace:
if ( drag->selected ) {
drag->deleteSelected(MOD__CTRL_ONLY);
ret = TRUE;
}
break;
default:
break;
}
break;
case GDK_KEY_RELEASE:
switch (get_group0_keyval (&event->key)) {
case GDK_Alt_L:
case GDK_Alt_R:
case GDK_Control_L:
case GDK_Control_R:
case GDK_Shift_L:
case GDK_Shift_R:
case GDK_Meta_L: // Meta is when you press Shift+Alt
case GDK_Meta_R:
event_context->defaultMessageContext()->clear();
break;
default:
break;
}
break;
default:
break;
}
if (!ret) {
if (((SPEventContextClass *) parent_class)->root_handler) {
ret = ((SPEventContextClass *) parent_class)->root_handler(event_context, event);
}
}
return ret;
}
static void spdc_check_for_and_apply_waiting_LPE(FreehandBase *dc, SPItem *item, SPCurve *curve)
{
using namespace Inkscape::LivePathEffect;
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
if (item && SP_IS_LPE_ITEM(item)) {
bool simplify = prefs->getInt(tool_name(dc) + "/simplify", 0);
if(simplify){
double tol = prefs->getDoubleLimited("/tools/freehand/pencil/tolerance", 10.0, 1.0, 100.0);
tol = tol/(100.0*(102.0-tol));
std::ostringstream ss;
ss << tol;
spdc_apply_simplify(ss.str(), dc, item);
sp_lpe_item_update_patheffect(SP_LPE_ITEM(item), false, false);
}
if (prefs->getInt(tool_name(dc) + "/freehand-mode", 0) == 1) {
Effect::createAndApply(SPIRO, dc->desktop->doc(), item);
}
if (prefs->getInt(tool_name(dc) + "/freehand-mode", 0) == 2) {
Effect::createAndApply(BSPLINE, dc->desktop->doc(), item);
}
SPShape *sp_shape = dynamic_cast<SPShape *>(item);
if (sp_shape) {
curve = sp_shape->getCurve();
}
//Store the clipboard path to apply in the future without the use of clipboard
static Geom::PathVector previous_shape_pathv;
shapeType shape = (shapeType)prefs->getInt(tool_name(dc) + "/shape", 0);
bool shape_applied = false;
SPCSSAttr *css_item = sp_css_attr_from_object(item, SP_STYLE_FLAG_ALWAYS);
const char *cstroke = sp_repr_css_property(css_item, "stroke", "none");
static SPItem *bend_item;
#define SHAPE_LENGTH 10
#define SHAPE_HEIGHT 10
if(shape == LAST_APPLIED){
shape = previous_shape_type;
if(shape == CLIPBOARD || shape == BEND_CLIPBOARD){
shape = LAST_APPLIED;
}
}
switch (shape) {
case NONE:
// don't apply any shape
break;
case TRIANGLE_IN:
{
// "triangle in"
std::vector<Geom::Point> points(1);
points[0] = Geom::Point(0., SHAPE_HEIGHT/2);
spdc_apply_powerstroke_shape(points, dc, item);
shape_applied = true;
break;
}
case TRIANGLE_OUT:
{
// "triangle out"
guint curve_length = curve->get_segment_count();
std::vector<Geom::Point> points(1);
points[0] = Geom::Point((double)curve_length, SHAPE_HEIGHT/2);
spdc_apply_powerstroke_shape(points, dc, item);
shape_applied = true;
break;
}
case ELLIPSE:
{
// "ellipse"
SPCurve *c = new SPCurve();
const double C1 = 0.552;
c->moveto(0, SHAPE_HEIGHT/2);
c->curveto(0, (1 - C1) * SHAPE_HEIGHT/2, (1 - C1) * SHAPE_LENGTH/2, 0, SHAPE_LENGTH/2, 0);
c->curveto((1 + C1) * SHAPE_LENGTH/2, 0, SHAPE_LENGTH, (1 - C1) * SHAPE_HEIGHT/2, SHAPE_LENGTH, SHAPE_HEIGHT/2);
c->curveto(SHAPE_LENGTH, (1 + C1) * SHAPE_HEIGHT/2, (1 + C1) * SHAPE_LENGTH/2, SHAPE_HEIGHT, SHAPE_LENGTH/2, SHAPE_HEIGHT);
c->curveto((1 - C1) * SHAPE_LENGTH/2, SHAPE_HEIGHT, 0, (1 + C1) * SHAPE_HEIGHT/2, 0, SHAPE_HEIGHT/2);
c->closepath();
spdc_paste_curve_as_freehand_shape(c->get_pathvector(), dc, item);
c->unref();
shape_applied = true;
break;
}
case CLIPBOARD:
{
// take shape from clipboard;
Inkscape::UI::ClipboardManager *cm = Inkscape::UI::ClipboardManager::get();
if(cm->paste(SP_ACTIVE_DESKTOP,true) == true){
SPItem * pasted_clipboard = dc->selection->singleItem();
if(pasted_clipboard){
Inkscape::XML::Node *pasted_clipboard_root = pasted_clipboard->getRepr();
Inkscape::XML::Node *path = sp_repr_lookup_name(pasted_clipboard_root, "svg:path", -1); // unlimited search depth
if ( path != NULL ) {
gchar const *svgd = path->attribute("d");
dc->selection->remove(SP_OBJECT(pasted_clipboard));
previous_shape_pathv = sp_svg_read_pathv(svgd);
previous_shape_pathv *= pasted_clipboard->transform;
spdc_paste_curve_as_freehand_shape(previous_shape_pathv, dc, item);
shape = CLIPBOARD;
shape_applied = true;
pasted_clipboard->deleteObject();
} else {
shape = NONE;
}
} else {
shape = NONE;
}
} else {
shape = NONE;
}
break;
}
case BEND_CLIPBOARD:
{
Inkscape::UI::ClipboardManager *cm = Inkscape::UI::ClipboardManager::get();
if(cm->paste(SP_ACTIVE_DESKTOP,true) == true){
gchar const *svgd = item->getRepr()->attribute("d");
bend_item = dc->selection->singleItem();
if(bend_item){
bend_item->moveTo(item,false);
bend_item->transform.setTranslation(Geom::Point());
spdc_apply_bend_shape(svgd, dc, bend_item);
dc->selection->add(SP_OBJECT(bend_item));
shape = BEND_CLIPBOARD;
} else {
shape = NONE;
}
} else {
shape = NONE;
}
break;
}
case LAST_APPLIED:
{
if(previous_shape_type == CLIPBOARD){
if(previous_shape_pathv.size() != 0){
spdc_paste_curve_as_freehand_shape(previous_shape_pathv, dc, item);
shape_applied = true;
shape = CLIPBOARD;
} else{
shape = NONE;
}
} else {
if(bend_item != NULL && bend_item->getRepr() != NULL){
gchar const *svgd = item->getRepr()->attribute("d");
dc->selection->add(SP_OBJECT(bend_item));
sp_selection_duplicate(dc->desktop);
dc->selection->remove(SP_OBJECT(bend_item));
bend_item = dc->selection->singleItem();
if(bend_item){
bend_item->moveTo(item,false);
Geom::Coord expansion_X = bend_item->transform.expansionX();
Geom::Coord expansion_Y = bend_item->transform.expansionY();
bend_item->transform = Geom::Affine(1,0,0,1,0,0);
bend_item->transform.setExpansionX(expansion_X);
bend_item->transform.setExpansionY(expansion_Y);
spdc_apply_bend_shape(svgd, dc, bend_item);
dc->selection->add(SP_OBJECT(bend_item));
shape = BEND_CLIPBOARD;
} else {
shape = NONE;
}
} else {
shape = NONE;
}
}
break;
}
default:
break;
}
previous_shape_type = shape;
if (shape_applied) {
// apply original stroke color as fill and unset stroke; then return
SPCSSAttr *css = sp_repr_css_attr_new();
if (!strcmp(cstroke, "none")){
sp_repr_css_set_property (css, "fill", "black");
} else {
sp_repr_css_set_property (css, "fill", cstroke);
}
sp_repr_css_set_property (css, "stroke", "none");
sp_desktop_apply_css_recursive(item, css, true);
sp_repr_css_attr_unref(css);
return;
}
if (dc->waiting_LPE_type != INVALID_LPE) {
Effect::createAndApply(dc->waiting_LPE_type, dc->desktop->doc(), item);
dc->waiting_LPE_type = INVALID_LPE;
if (SP_IS_LPETOOL_CONTEXT(dc)) {
// since a geometric LPE was applied, we switch back to "inactive" mode
lpetool_context_switch_mode(SP_LPETOOL_CONTEXT(dc), INVALID_LPE);
}
}
if (SP_IS_PEN_CONTEXT(dc)) {
SP_PEN_CONTEXT(dc)->setPolylineMode();
}
}
}
static gint sp_zoom_context_root_handler(SPEventContext *event_context, GdkEvent *event)
{
SPDesktop *desktop = event_context->desktop;
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
SPZoomContext *zc = SP_ZOOM_CONTEXT(event_context);
tolerance = prefs->getIntLimited("/options/dragtolerance/value", 0, 0, 100);
double const zoom_inc = prefs->getDoubleLimited("/options/zoomincrement/value", M_SQRT2, 1.01, 10);
gint ret = FALSE;
switch (event->type) {
case GDK_BUTTON_PRESS:
{
Geom::Point const button_w(event->button.x, event->button.y);
Geom::Point const button_dt(desktop->w2d(button_w));
if (event->button.button == 1 && !event_context->space_panning) {
// save drag origin
xp = (gint) event->button.x;
yp = (gint) event->button.y;
within_tolerance = true;
Inkscape::Rubberband::get(desktop)->start(desktop, button_dt);
escaped = false;
ret = TRUE;
} else if (event->button.button == 3) {
double const zoom_rel( (event->button.state & GDK_SHIFT_MASK)
? zoom_inc
: 1 / zoom_inc );
desktop->zoom_relative_keep_point(button_dt, zoom_rel);
ret = TRUE;
}
sp_canvas_item_grab(SP_CANVAS_ITEM(desktop->acetate),
GDK_KEY_PRESS_MASK | GDK_KEY_RELEASE_MASK | GDK_BUTTON_RELEASE_MASK | GDK_POINTER_MOTION_MASK | GDK_POINTER_MOTION_HINT_MASK | GDK_BUTTON_PRESS_MASK,
NULL, event->button.time);
zc->grabbed = SP_CANVAS_ITEM(desktop->acetate);
break;
}
case GDK_MOTION_NOTIFY:
if (event->motion.state & GDK_BUTTON1_MASK && !event_context->space_panning) {
ret = TRUE;
if ( within_tolerance
&& ( abs( (gint) event->motion.x - xp ) < tolerance )
&& ( abs( (gint) event->motion.y - yp ) < tolerance ) ) {
break; // do not drag if we're within tolerance from origin
}
// Once the user has moved farther than tolerance from the original location
// (indicating they intend to move the object, not click), then always process the
// motion notify coordinates as given (no snapping back to origin)
within_tolerance = false;
Geom::Point const motion_w(event->motion.x, event->motion.y);
Geom::Point const motion_dt(desktop->w2d(motion_w));
Inkscape::Rubberband::get(desktop)->move(motion_dt);
gobble_motion_events(GDK_BUTTON1_MASK);
}
break;
case GDK_BUTTON_RELEASE:
{
Geom::Point const button_w(event->button.x, event->button.y);
Geom::Point const button_dt(desktop->w2d(button_w));
if ( event->button.button == 1 && !event_context->space_panning) {
Geom::OptRect const b = Inkscape::Rubberband::get(desktop)->getRectangle();
if (b && !within_tolerance) {
desktop->set_display_area(*b, 10);
} else if (!escaped) {
double const zoom_rel( (event->button.state & GDK_SHIFT_MASK)
? 1 / zoom_inc
: zoom_inc );
desktop->zoom_relative_keep_point(button_dt, zoom_rel);
}
ret = TRUE;
}
Inkscape::Rubberband::get(desktop)->stop();
if (zc->grabbed) {
sp_canvas_item_ungrab(zc->grabbed, event->button.time);
zc->grabbed = NULL;
}
xp = yp = 0;
escaped = false;
break;
}
case GDK_KEY_PRESS:
switch (get_group0_keyval (&event->key)) {
case GDK_Escape:
Inkscape::Rubberband::get(desktop)->stop();
xp = yp = 0;
escaped = true;
ret = TRUE;
break;
case GDK_Up:
case GDK_Down:
case GDK_KP_Up:
case GDK_KP_Down:
// prevent the zoom field from activation
if (!MOD__CTRL_ONLY)
ret = TRUE;
break;
case GDK_Shift_L:
case GDK_Shift_R:
event_context->cursor_shape = SP_ZOOM_OUT_CURSOR;
sp_event_context_update_cursor(event_context);
break;
default:
break;
}
break;
case GDK_KEY_RELEASE:
switch (get_group0_keyval (&event->key)) {
case GDK_Shift_L:
case GDK_Shift_R:
event_context->cursor_shape = SP_ZOOM_CURSOR;
sp_event_context_update_cursor(event_context);
break;
default:
break;
}
break;
default:
break;
}
if (!ret) {
if (((SPEventContextClass *) parent_class)->root_handler) {
ret = ((SPEventContextClass *) parent_class)->root_handler(event_context, event);
}
}
return ret;
}
/* interpolates the sketched curve and tweaks the current sketch interpolation*/
static void
sketch_interpolate(SPPencilContext *pc)
{
g_assert( pc->ps.size() > 1 );
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
double const tol = prefs->getDoubleLimited("/tools/freehand/pencil/tolerance", 10.0, 1.0, 100.0) * 0.4;
double const tolerance_sq = 0.02 * square( pc->desktop->w2d().descrim() *
tol) * exp(0.2*tol - 2);
bool average_all_sketches = prefs->getBool("/tools/freehand/pencil/average_all_sketches", true);
g_assert(is_zero(pc->req_tangent)
|| is_unit_vector(pc->req_tangent));
Geom::Point const tHatEnd(0, 0);
guint n_points = pc->ps.size();
pc->red_curve->reset();
pc->red_curve_is_valid = false;
Geom::Point * b = g_new(Geom::Point, 4*n_points);
Geom::Point * points = g_new(Geom::Point, 4*n_points);
for (unsigned i = 0; i < pc->ps.size(); i++) {
points[i] = pc->ps[i];
}
// worst case gives us a segment per point
int max_segs = 4*n_points;
int const n_segs = Geom::bezier_fit_cubic_r(b, points, n_points,
tolerance_sq, max_segs);
if ( n_segs > 0)
{
Geom::Path fit(b[0]);
for (int c = 0; c < n_segs; c++) {
fit.appendNew<Geom::CubicBezier>(b[4*c+1], b[4*c+2], b[4*c+3]);
}
Geom::Piecewise<Geom::D2<Geom::SBasis> > fit_pwd2 = fit.toPwSb();
double t =0.;
if ( pc->sketch_n > 0 ) {
if (average_all_sketches) {
// Average = (sum of all) / n
// = (sum of all + new one) / n+1
// = ((old average)*n + new one) / n+1
t = pc->sketch_n / (pc->sketch_n + 1.);
} else {
t = 0.5;
}
pc->sketch_interpolation = Geom::lerp(t, fit_pwd2, pc->sketch_interpolation);
} else {
pc->sketch_interpolation = fit_pwd2;
}
pc->sketch_n++;
pc->green_curve->reset();
pc->green_curve->set_pathvector(Geom::path_from_piecewise(pc->sketch_interpolation, 0.01));
sp_canvas_bpath_set_bpath(SP_CANVAS_BPATH(pc->red_bpath), pc->green_curve);
/* Fit and draw and copy last point */
g_assert(!pc->green_curve->is_empty());
/* Set up direction of next curve. */
{
Geom::CubicBezier const * last_seg = dynamic_cast<Geom::CubicBezier const *>(pc->green_curve->last_segment());
g_assert( last_seg ); // Relevance: validity of (*last_seg)[2]
pc->p[0] = last_seg->finalPoint();
pc->npoints = 1;
Geom::Point const req_vec( pc->p[0] - (*last_seg)[2] );
pc->req_tangent = ( ( Geom::is_zero(req_vec) || !in_svg_plane(req_vec) )
? Geom::Point(0, 0)
: Geom::unit_vector(req_vec) );
}
}
g_free(b);
g_free(points);
pc->ps.clear();
}
/**
Handles all keyboard and mouse input for meshs.
*/
static gint
sp_mesh_context_root_handler(SPEventContext *event_context, GdkEvent *event)
{
// static int count = 0;
// std::cout << "sp_mesh_context_root_handler: " << count++ << std::endl;
static bool dragging;
SPDesktop *desktop = event_context->desktop;
Inkscape::Selection *selection = sp_desktop_selection (desktop);
Inkscape::Preferences *prefs = Inkscape::Preferences::get();
SPMeshContext *rc = SP_MESH_CONTEXT(event_context);
event_context->tolerance = prefs->getIntLimited("/options/dragtolerance/value", 0, 0, 100);
double const nudge = prefs->getDoubleLimited("/options/nudgedistance/value", 2, 0, 1000, "px"); // in px
GrDrag *drag = event_context->_grdrag;
g_assert (drag);
gint ret = FALSE;
switch (event->type) {
case GDK_2BUTTON_PRESS:
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_2BUTTON_PRESS" << std::endl;
#endif
// Double click:
// If over a mesh line, divide mesh row/column
// If not over a line, create new gradients for selected objects.
if ( event->button.button == 1 ) {
// Are we over a mesh line?
bool over_line = false;
SPCtrlCurve *line = NULL;
if (drag->lines) {
for (GSList *l = drag->lines; (l != NULL) && (!over_line); l = l->next) {
line = (SPCtrlCurve*) l->data;
over_line |= sp_mesh_context_is_over_line (rc, (SPItem*) line, Geom::Point(event->motion.x, event->motion.y));
}
}
if (over_line) {
// We take the first item in selection, because with doubleclick, the first click
// always resets selection to the single object under cursor
sp_mesh_context_split_near_point(rc, SP_ITEM(selection->itemList()->data), rc->mousepoint_doc, event->button.time);
} else {
// Create a new gradient with default coordinates.
for (GSList const* i = selection->itemList(); i != NULL; i = i->next) {
SPItem *item = SP_ITEM(i->data);
SPGradientType new_type = SP_GRADIENT_TYPE_MESH;
Inkscape::PaintTarget fsmode = (prefs->getInt("/tools/gradient/newfillorstroke", 1) != 0) ? Inkscape::FOR_FILL : Inkscape::FOR_STROKE;
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: creating new mesh on: " << (fsmode == Inkscape::FOR_FILL ? "Fill" : "Stroke") << std::endl;
#endif
SPGradient *vector = sp_gradient_vector_for_object(sp_desktop_document(desktop), desktop, item, fsmode);
SPGradient *priv = sp_item_set_gradient(item, vector, new_type, fsmode);
sp_gradient_reset_to_userspace(priv, item);
}
DocumentUndo::done(sp_desktop_document (desktop), SP_VERB_CONTEXT_MESH,
_("Create default mesh"));
}
ret = TRUE;
}
break;
case GDK_BUTTON_PRESS:
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_BUTTON_PRESS" << std::endl;
#endif
// Button down
// If Shift key down: do rubber band selection
// Else set origin for drag. A drag creates a new gradient if one does not exist
if ( event->button.button == 1 && !event_context->space_panning ) {
Geom::Point button_w(event->button.x, event->button.y);
// save drag origin
event_context->xp = (gint) button_w[Geom::X];
event_context->yp = (gint) button_w[Geom::Y];
event_context->within_tolerance = true;
dragging = true;
Geom::Point button_dt = desktop->w2d(button_w);
if (event->button.state & GDK_SHIFT_MASK) {
Inkscape::Rubberband::get(desktop)->start(desktop, button_dt);
} else {
// remember clicked item, disregarding groups, honoring Alt; do nothing with Crtl to
// enable Ctrl+doubleclick of exactly the selected item(s)
if (!(event->button.state & GDK_CONTROL_MASK))
event_context->item_to_select = sp_event_context_find_item (desktop, button_w, event->button.state & GDK_MOD1_MASK, TRUE);
if (!selection->isEmpty()) {
SnapManager &m = desktop->namedview->snap_manager;
m.setup(desktop);
m.freeSnapReturnByRef(button_dt, Inkscape::SNAPSOURCE_NODE_HANDLE);
m.unSetup();
}
rc->origin = button_dt;
}
ret = TRUE;
}
break;
case GDK_MOTION_NOTIFY:
// Mouse move
if ( dragging
&& ( event->motion.state & GDK_BUTTON1_MASK ) && !event_context->space_panning )
{
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_MOTION_NOTIFY: Dragging" << std::endl;
#endif
if ( event_context->within_tolerance
&& ( abs( (gint) event->motion.x - event_context->xp ) < event_context->tolerance )
&& ( abs( (gint) event->motion.y - event_context->yp ) < event_context->tolerance ) ) {
break; // do not drag if we're within tolerance from origin
}
// Once the user has moved farther than tolerance from the original location
// (indicating they intend to draw, not click), then always process the
// motion notify coordinates as given (no snapping back to origin)
event_context->within_tolerance = false;
Geom::Point const motion_w(event->motion.x,
event->motion.y);
Geom::Point const motion_dt = event_context->desktop->w2d(motion_w);
if (Inkscape::Rubberband::get(desktop)->is_started()) {
Inkscape::Rubberband::get(desktop)->move(motion_dt);
event_context->defaultMessageContext()->set(Inkscape::NORMAL_MESSAGE, _("<b>Draw around</b> handles to select them"));
} else {
// Create new gradient with coordinates determined by drag.
sp_mesh_drag(*rc, motion_dt, event->motion.state, event->motion.time);
}
gobble_motion_events(GDK_BUTTON1_MASK);
ret = TRUE;
} else {
// Not dragging
// Do snapping
if (!drag->mouseOver() && !selection->isEmpty()) {
SnapManager &m = desktop->namedview->snap_manager;
m.setup(desktop);
Geom::Point const motion_w(event->motion.x, event->motion.y);
Geom::Point const motion_dt = event_context->desktop->w2d(motion_w);
m.preSnap(Inkscape::SnapCandidatePoint(motion_dt, Inkscape::SNAPSOURCE_OTHER_HANDLE));
m.unSetup();
}
// Highlight corner node corresponding to side or tensor node
if( drag->mouseOver() ) {
// MESH FIXME: Light up corresponding corner node corresponding to node we are over.
// See "pathflash" in ui/tools/node-tool.cpp for ideas.
// Use desktop->add_temporary_canvasitem( SPCanvasItem, milliseconds );
}
// Change cursor shape if over line
bool over_line = false;
if (drag->lines) {
for (GSList *l = drag->lines; l != NULL; l = l->next) {
over_line |= sp_mesh_context_is_over_line (rc, (SPItem*) l->data, Geom::Point(event->motion.x, event->motion.y));
}
}
if (rc->cursor_addnode && !over_line) {
event_context->cursor_shape = cursor_gradient_xpm;
sp_event_context_update_cursor(event_context);
rc->cursor_addnode = false;
} else if (!rc->cursor_addnode && over_line) {
event_context->cursor_shape = cursor_gradient_add_xpm;
sp_event_context_update_cursor(event_context);
rc->cursor_addnode = true;
}
}
break;
case GDK_BUTTON_RELEASE:
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_BUTTON_RELEASE" << std::endl;
#endif
event_context->xp = event_context->yp = 0;
if ( event->button.button == 1 && !event_context->space_panning ) {
// Check if over line
bool over_line = false;
SPCtrlLine *line = NULL;
if (drag->lines) {
for (GSList *l = drag->lines; (l != NULL) && (!over_line); l = l->next) {
line = (SPCtrlLine*) l->data;
over_line = sp_mesh_context_is_over_line (rc, (SPItem*) line, Geom::Point(event->motion.x, event->motion.y));
if (over_line)
break;
}
}
if ( (event->button.state & GDK_CONTROL_MASK) && (event->button.state & GDK_MOD1_MASK ) ) {
if (over_line && line) {
sp_mesh_context_split_near_point(rc, line->item, rc->mousepoint_doc, 0);
ret = TRUE;
}
} else {
dragging = false;
// unless clicked with Ctrl (to enable Ctrl+doubleclick).
if (event->button.state & GDK_CONTROL_MASK) {
ret = TRUE;
break;
}
if (!event_context->within_tolerance) {
// we've been dragging, either do nothing (grdrag handles that),
// or rubberband-select if we have rubberband
Inkscape::Rubberband *r = Inkscape::Rubberband::get(desktop);
if (r->is_started() && !event_context->within_tolerance) {
// this was a rubberband drag
if (r->getMode() == RUBBERBAND_MODE_RECT) {
Geom::OptRect const b = r->getRectangle();
drag->selectRect(*b);
}
}
} else if (event_context->item_to_select) {
if (over_line && line) {
// Clicked on an existing mesh line, don't change selection. This stops
// possible change in selection during a double click with overlapping objects
}
else {
// no dragging, select clicked item if any
if (event->button.state & GDK_SHIFT_MASK) {
selection->toggle(event_context->item_to_select);
} else {
selection->set(event_context->item_to_select);
}
}
} else {
// click in an empty space; do the same as Esc
if (drag->selected) {
drag->deselectAll();
} else {
selection->clear();
}
}
event_context->item_to_select = NULL;
ret = TRUE;
}
Inkscape::Rubberband::get(desktop)->stop();
}
break;
case GDK_KEY_PRESS:
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_KEY_PRESS" << std::endl;
#endif
// FIXME: tip
switch (get_group0_keyval (&event->key)) {
case GDK_KEY_Alt_L:
case GDK_KEY_Alt_R:
case GDK_KEY_Control_L:
case GDK_KEY_Control_R:
case GDK_KEY_Shift_L:
case GDK_KEY_Shift_R:
case GDK_KEY_Meta_L: // Meta is when you press Shift+Alt (at least on my machine)
case GDK_KEY_Meta_R:
sp_event_show_modifier_tip (event_context->defaultMessageContext(), event,
_("FIXME<b>Ctrl</b>: snap mesh angle"),
_("FIXME<b>Shift</b>: draw mesh around the starting point"),
NULL);
break;
case GDK_KEY_A:
case GDK_KEY_a:
if (MOD__CTRL_ONLY && drag->isNonEmpty()) {
drag->selectAll();
ret = TRUE;
}
break;
case GDK_KEY_Escape:
if (drag->selected) {
drag->deselectAll();
} else {
selection->clear();
}
ret = TRUE;
//TODO: make dragging escapable by Esc
break;
case GDK_KEY_Left: // move handle left
case GDK_KEY_KP_Left:
case GDK_KEY_KP_4:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(mul*-10, 0); // shift
else drag->selected_move_screen(mul*-1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(mul*-10*nudge, 0); // shift
else drag->selected_move(mul*-nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_KEY_Up: // move handle up
case GDK_KEY_KP_Up:
case GDK_KEY_KP_8:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(0, mul*10); // shift
else drag->selected_move_screen(0, mul*1); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(0, mul*10*nudge); // shift
else drag->selected_move(0, mul*nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_KEY_Right: // move handle right
case GDK_KEY_KP_Right:
case GDK_KEY_KP_6:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(mul*10, 0); // shift
else drag->selected_move_screen(mul*1, 0); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(mul*10*nudge, 0); // shift
else drag->selected_move(mul*nudge, 0); // no shift
}
ret = TRUE;
}
break;
case GDK_KEY_Down: // move handle down
case GDK_KEY_KP_Down:
case GDK_KEY_KP_2:
if (!MOD__CTRL) { // not ctrl
gint mul = 1 + gobble_key_events(
get_group0_keyval(&event->key), 0); // with any mask
if (MOD__ALT) { // alt
if (MOD__SHIFT) drag->selected_move_screen(0, mul*-10); // shift
else drag->selected_move_screen(0, mul*-1); // no shift
}
else { // no alt
if (MOD__SHIFT) drag->selected_move(0, mul*-10*nudge); // shift
else drag->selected_move(0, mul*-nudge); // no shift
}
ret = TRUE;
}
break;
case GDK_KEY_Insert:
case GDK_KEY_KP_Insert:
// with any modifiers:
//sp_gradient_context_add_stops_between_selected_stops (rc);
std::cout << "Inserting stops between selected stops not implemented yet" << std::endl;
ret = TRUE;
break;
case GDK_KEY_Delete:
case GDK_KEY_KP_Delete:
case GDK_KEY_BackSpace:
if ( drag->selected ) {
std::cout << "Deleting mesh stops not implemented yet" << std::endl;
ret = TRUE;
}
break;
// Mesh Operations --------------------------------------------
case GDK_KEY_b: // Toggle mesh side between lineto and curveto.
case GDK_KEY_B:
if (MOD__ALT && drag->isNonEmpty() && drag->hasSelection()) {
sp_mesh_context_corner_operation ( rc, MG_CORNER_SIDE_TOGGLE );
ret = TRUE;
}
break;
case GDK_KEY_c: // Convert mesh side from generic Bezier to Bezier approximating arc,
case GDK_KEY_C: // preserving handle direction.
if (MOD__ALT && drag->isNonEmpty() && drag->hasSelection()) {
sp_mesh_context_corner_operation ( rc, MG_CORNER_SIDE_ARC );
ret = TRUE;
}
break;
case GDK_KEY_g: // Toggle mesh tensor points on/off
case GDK_KEY_G:
if (MOD__ALT && drag->isNonEmpty() && drag->hasSelection()) {
sp_mesh_context_corner_operation ( rc, MG_CORNER_TENSOR_TOGGLE );
ret = TRUE;
}
break;
case GDK_KEY_j: // Smooth corner color
case GDK_KEY_J:
if (MOD__ALT && drag->isNonEmpty() && drag->hasSelection()) {
sp_mesh_context_corner_operation ( rc, MG_CORNER_COLOR_SMOOTH );
ret = TRUE;
}
break;
case GDK_KEY_k: // Pick corner color
case GDK_KEY_K:
if (MOD__ALT && drag->isNonEmpty() && drag->hasSelection()) {
sp_mesh_context_corner_operation ( rc, MG_CORNER_COLOR_PICK );
ret = TRUE;
}
break;
default:
break;
}
break;
case GDK_KEY_RELEASE:
#ifdef DEBUG_MESH
std::cout << "sp_mesh_context_root_handler: GDK_KEY_RELEASE" << std::endl;
#endif
switch (get_group0_keyval (&event->key)) {
case GDK_KEY_Alt_L:
case GDK_KEY_Alt_R:
case GDK_KEY_Control_L:
case GDK_KEY_Control_R:
case GDK_KEY_Shift_L:
case GDK_KEY_Shift_R:
case GDK_KEY_Meta_L: // Meta is when you press Shift+Alt
case GDK_KEY_Meta_R:
event_context->defaultMessageContext()->clear();
break;
default:
break;
}
break;
default:
break;
}
if (!ret) {
if (((SPEventContextClass *) parent_class)->root_handler) {
ret = ((SPEventContextClass *) parent_class)->root_handler(event_context, event);
}
}
return ret;
}
