/*
* Update variables with new options
*/
bool PANEL_PCBNEW_DISPLAY_OPTIONS::TransferDataFromWindow()
{
PCB_DISPLAY_OPTIONS* displ_opts = (PCB_DISPLAY_OPTIONS*) m_frame->GetDisplayOptions();
displ_opts->m_ShowTrackClearanceMode = UTIL::GetValFromConfig(
traceClearanceSelectMap, m_OptDisplayTracksClearance->GetSelection() );
displ_opts->m_DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
displ_opts->m_DisplayPadNum = m_OptDisplayPadNumber->GetValue();
m_frame->SetElementVisibility( LAYER_NO_CONNECTS, m_OptDisplayPadNoConn->GetValue() );
displ_opts->m_DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();
displ_opts->m_DisplayRatsnestLinesCurved = m_OptDisplayCurvedRatsnestLines->GetValue();
m_galOptsPanel->TransferDataFromWindow();
// Apply changes to the GAL
KIGFX::VIEW* view = m_frame->GetGalCanvas()->GetView();
KIGFX::PCB_PAINTER* painter = static_cast<KIGFX::PCB_PAINTER*>( view->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings = painter->GetSettings();
settings->LoadDisplayOptions( displ_opts, m_frame->ShowPageLimits() );
view->RecacheAllItems();
view->MarkTargetDirty( KIGFX::TARGET_NONCACHED );
m_frame->GetCanvas()->Refresh();
return true;
}
void PCB_LAYER_WIDGET::OnRenderColorChange( int aId, COLOR4D aColor )
{
wxASSERT( aId > GAL_LAYER_ID_START && aId < GAL_LAYER_ID_END );
myframe->Settings().Colors().SetItemColor( static_cast<GAL_LAYER_ID>( aId ), aColor );
EDA_DRAW_PANEL_GAL* galCanvas = myframe->GetGalCanvas();
if( galCanvas && myframe->IsGalCanvasActive() )
{
if( aId == LAYER_GRID )
galCanvas->GetGAL()->SetGridColor( aColor );
KIGFX::VIEW* view = galCanvas->GetView();
view->GetPainter()->GetSettings()->ImportLegacyColors( &myframe->Settings().Colors() );
view->MarkTargetDirty( KIGFX::TARGET_NONCACHED ); // useful to update rastnest
view->UpdateLayerColor( aId );
// plated-through-holes don't have their own color; they use the background color
if( aId == LAYER_PCB_BACKGROUND )
view->UpdateLayerColor( LAYER_PADS_PLATEDHOLES );
galCanvas->ForceRefresh();
}
myframe->ReCreateHToolbar();
myframe->GetCanvas()->Refresh();
}
void PCB_LAYER_WIDGET::OnLayerColorChange( int aLayer, COLOR4D aColor )
{
// Avoid setting the alpha channel, when we are in legacy mode,
// because in legacy mode the alpha channel is not used, but changing it
// destroys the GAL color setup
if( !myframe->IsGalCanvasActive() )
{
COLOR4D oldColor = myframe->Settings().Colors().GetLayerColor( aLayer );
aColor.a = oldColor.a;
}
myframe->Settings().Colors().SetLayerColor( aLayer, aColor );
if( myframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
view->GetPainter()->GetSettings()->ImportLegacyColors( &myframe->Settings().Colors() );
view->UpdateLayerColor( aLayer );
view->UpdateLayerColor( GetNetnameLayer( aLayer ) );
}
myframe->ReCreateHToolbar();
myframe->GetCanvas()->Refresh();
if( aLayer == LAYER_PCB_BACKGROUND )
myframe->SetDrawBgColor( aColor );
}
void PCB_LAYER_WIDGET::OnLayerColorChange( int aLayer, EDA_COLOR_T aColor )
{
myframe->GetBoard()->SetLayerColor( ToLAYER_ID( aLayer ), aColor );
if( myframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
view->GetPainter()->GetSettings()->ImportLegacyColors( myframe->GetBoard()->GetColorsSettings() );
view->UpdateLayerColor( aLayer );
}
myframe->GetCanvas()->Refresh();
}
void GERBER_LAYER_WIDGET::OnLayerColorChange( int aLayer, COLOR4D aColor )
{
// NOTE: Active layer in GerbView is stored as 0-indexed, but layer color is
// stored according to the GERBER_DRAW_LAYER() offset.
myframe->SetLayerColor( GERBER_DRAW_LAYER( aLayer ), aColor );
myframe->m_SelLayerBox->ResyncBitmapOnly();
if( myframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = myframe->GetGalCanvas()->GetView();
view->GetPainter()->GetSettings()->ImportLegacyColors( myframe->m_colorsSettings );
view->UpdateLayerColor( GERBER_DRAW_LAYER( aLayer ) );
}
myframe->GetCanvas()->Refresh();
}
void PCB_EDIT_FRAME::setHighContrastLayer( LAYER_NUM aLayer )
{
// Set display settings for high contrast mode
KIGFX::VIEW* view = GetGalCanvas()->GetView();
KIGFX::RENDER_SETTINGS* rSettings = view->GetPainter()->GetSettings();
setTopLayer( aLayer );
rSettings->ClearActiveLayers();
rSettings->SetActiveLayer( aLayer );
if( IsCopperLayer( aLayer ) )
{
// Bring some other layers to the front in case of copper layers and make them colored
// fixme do not like the idea of storing the list of layers here,
// should be done in some other way I guess..
LAYER_NUM layers[] = {
GetNetnameLayer( aLayer ), ITEM_GAL_LAYER( VIAS_VISIBLE ),
ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ),
ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ),
ITEM_GAL_LAYER( GP_OVERLAY ), ITEM_GAL_LAYER( RATSNEST_VISIBLE )
};
for( unsigned int i = 0; i < sizeof( layers ) / sizeof( LAYER_NUM ); ++i )
rSettings->SetActiveLayer( layers[i] );
// Pads should be shown too
if( aLayer == FIRST_COPPER_LAYER )
{
rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ) );
}
else if( aLayer == LAST_COPPER_LAYER )
{
rSettings->SetActiveLayer( ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
rSettings->SetActiveLayer( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ) );
}
}
view->UpdateAllLayersColor();
}
void PCB_BASE_FRAME::LoadSettings()
{
wxASSERT( wxGetApp().GetSettings() != NULL );
wxConfig* cfg = wxGetApp().GetSettings();
EDA_DRAW_FRAME::LoadSettings();
// Ensure grid id is an existent grid id:
if( (m_LastGridSizeId <= 0) ||
(m_LastGridSizeId > (ID_POPUP_GRID_USER - ID_POPUP_GRID_LEVEL_1000)) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
cfg->Read( m_FrameName + UserGridSizeXEntry, &m_UserGridSize.x, 0.01 );
cfg->Read( m_FrameName + UserGridSizeYEntry, &m_UserGridSize.y, 0.01 );
long itmp;
cfg->Read( m_FrameName + UserGridUnitsEntry, &itmp, ( long )INCHES );
m_UserGridUnit = (EDA_UNITS_T) itmp;
cfg->Read( m_FrameName + DisplayPadFillEntry, &m_DisplayPadFill, true );
cfg->Read( m_FrameName + DisplayViaFillEntry, &m_DisplayViaFill, true );
cfg->Read( m_FrameName + DisplayPadNumberEntry, &m_DisplayPadNum, true );
cfg->Read( m_FrameName + DisplayModuleEdgeEntry, &m_DisplayModEdge, ( long )FILLED );
cfg->Read( m_FrameName + FastGrid1Entry, &itmp, ( long )0);
m_FastGrid1 = itmp;
cfg->Read( m_FrameName + FastGrid2Entry, &itmp, ( long )0);
m_FastGrid2 = itmp;
if( m_DisplayModEdge < LINE || m_DisplayModEdge > SKETCH )
m_DisplayModEdge = FILLED;
cfg->Read( m_FrameName + DisplayModuleTextEntry, &m_DisplayModText, ( long )FILLED );
if( m_DisplayModText < LINE || m_DisplayModText > SKETCH )
m_DisplayModText = FILLED;
// Apply display settings for GAL
KIGFX::VIEW* view = GetGalCanvas()->GetView();
// Set rendering order and properties of layers
for( LAYER_NUM i = 0; (unsigned) i < sizeof(GAL_LAYER_ORDER) / sizeof(LAYER_NUM); ++i )
{
LAYER_NUM layer = GAL_LAYER_ORDER[i];
wxASSERT( layer < KIGFX::VIEW::VIEW_MAX_LAYERS );
view->SetLayerOrder( layer, i );
if( IsCopperLayer( layer ) )
{
// Copper layers are required for netname layers
view->SetRequired( GetNetnameLayer( layer ), layer );
view->SetLayerTarget( layer, KIGFX::TARGET_CACHED );
}
else if( IsNetnameLayer( layer ) )
{
// Netnames are drawn only when scale is sufficient (level of details)
// so there is no point in caching them
view->SetLayerTarget( layer, KIGFX::TARGET_NONCACHED );
}
}
// Some more required layers settings
view->SetRequired( ITEM_GAL_LAYER( VIAS_HOLES_VISIBLE ), ITEM_GAL_LAYER( VIAS_VISIBLE ) );
view->SetRequired( ITEM_GAL_LAYER( PADS_HOLES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PADS_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PADS_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_FR_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( ADHESIVE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_FRONT, ITEM_GAL_LAYER( PAD_FR_VISIBLE ) );
view->SetRequired( NETNAMES_GAL_LAYER( PAD_BK_NETNAMES_VISIBLE ), ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( ADHESIVE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERPASTE_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetRequired( SOLDERMASK_N_BACK, ITEM_GAL_LAYER( PAD_BK_VISIBLE ) );
view->SetLayerTarget( ITEM_GAL_LAYER( GP_OVERLAY ), KIGFX::TARGET_OVERLAY );
view->SetLayerTarget( ITEM_GAL_LAYER( RATSNEST_VISIBLE ), KIGFX::TARGET_OVERLAY );
// Apply layer coloring scheme & display options
if( view->GetPainter() )
{
KIGFX::PCB_RENDER_SETTINGS* settings = new KIGFX::PCB_RENDER_SETTINGS();
// Load layers' colors from PCB data
settings->ImportLegacyColors( m_Pcb->GetColorsSettings() );
view->GetPainter()->ApplySettings( settings );
// Load display options (such as filled/outline display of items)
settings->LoadDisplayOptions( DisplayOpt );
}
// WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" )
// when reading doubles in config,
// but forget to back to current locale. So we call SetLocaleTo_Default
SetLocaleTo_Default( );
}
/* Update variables with new options
*/
void DIALOG_DISPLAY_OPTIONS::OnOkClick(wxCommandEvent& event)
{
if ( m_Show_Page_Limits->GetSelection() == 0 )
m_Parent->SetShowPageLimits( true );
else
m_Parent->SetShowPageLimits( false );
if ( m_OptDisplayTracks->GetSelection() == 1 )
DisplayOpt.DisplayPcbTrackFill = true;
else
DisplayOpt.DisplayPcbTrackFill = false;
m_Parent->m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
DisplayOpt.m_DisplayViaMode = (VIA_DISPLAY_MODE_T) m_OptDisplayViaHole->GetSelection();
switch ( m_OptDisplayTracksClearance->GetSelection() )
{
case 0:
DisplayOpt.ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
break;
case 1:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS;
break;
case 2:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS;
break;
case 3:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_NEW_AND_EDITED_TRACKS_AND_VIA_AREAS;
break;
case 4:
DisplayOpt.ShowTrackClearanceMode = SHOW_CLEARANCE_ALWAYS;
break;
}
m_Parent->m_DisplayModText = DisplayOpt.DisplayModText = m_OptDisplayModTexts->GetSelection();
m_Parent->m_DisplayModEdge = DisplayOpt.DisplayModEdge = m_OptDisplayModEdges->GetSelection();
if (m_OptDisplayPads->GetSelection() == 1 )
DisplayOpt.DisplayPadFill = true;
else
DisplayOpt.DisplayPadFill = false;
if (m_OptDisplayVias->GetSelection() == 1 )
DisplayOpt.DisplayViaFill = true;
else
DisplayOpt.DisplayViaFill = false;
m_Parent->m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_Parent->m_DisplayViaFill = DisplayOpt.DisplayViaFill;
DisplayOpt.DisplayPadIsol = m_OptDisplayPadClearence->GetValue();
m_Parent->m_DisplayPadNum = DisplayOpt.DisplayPadNum = m_OptDisplayPadNumber->GetValue();
m_Parent->SetElementVisibility( PCB_VISIBLE(NO_CONNECTS_VISIBLE),
m_OptDisplayPadNoConn->GetValue() );
DisplayOpt.DisplayDrawItems = m_OptDisplayDrawings->GetSelection();
DisplayOpt.DisplayNetNamesMode = m_ShowNetNamesOption->GetSelection();
// Apply changes to the GAL
KIGFX::VIEW* view = m_Parent->GetGalCanvas()->GetView();
KIGFX::PCB_PAINTER* painter = static_cast<KIGFX::PCB_PAINTER*>( view->GetPainter() );
KIGFX::PCB_RENDER_SETTINGS* settings =
static_cast<KIGFX::PCB_RENDER_SETTINGS*>( painter->GetSettings() );
settings->LoadDisplayOptions( DisplayOpt );
view->RecacheAllItems( true );
m_Parent->GetCanvas()->Refresh();
EndModal( 1 );
}