void apply(osg::Geometry& geom)
{
geom.setUseDisplayList(false);
if (!_manualVertexAliasing) return;
osg::notify(osg::NOTICE)<<"Found geometry "<<&geom<<std::endl;
if (geom.getVertexArray())
{
setVertexAttrib(geom, _vertexAlias, geom.getVertexArray(), false, osg::Array::BIND_PER_VERTEX);
geom.setVertexArray(0);
}
if (geom.getNormalArray())
{
setVertexAttrib(geom, _normalAlias, geom.getNormalArray(), true);
geom.setNormalArray(0);
}
if (geom.getColorArray())
{
setVertexAttrib(geom, _colorAlias, geom.getColorArray(), false);
geom.setColorArray(0);
}
if (geom.getSecondaryColorArray())
{
setVertexAttrib(geom, _secondaryColorAlias, geom.getSecondaryColorArray(), false);
geom.setSecondaryColorArray(0);
}
if (geom.getFogCoordArray())
{
// should we normalize the FogCoord array? Don't think so...
setVertexAttrib(geom, _fogCoordAlias, geom.getFogCoordArray(), false);
geom.setFogCoordArray(0);
}
unsigned int maxNumTexCoords = geom.getNumTexCoordArrays();
if (maxNumTexCoords>8)
{
osg::notify(osg::NOTICE)<<"Warning: Ignoring "<<maxNumTexCoords-8<<" texture coordinate arrays, only 8 are currently supported in vertex attribute conversion code."<<std::endl;
maxNumTexCoords = 8;
}
for(unsigned int i=0; i<maxNumTexCoords; ++i)
{
if (geom.getTexCoordArray(i))
{
setVertexAttrib(geom, _texCoordAlias[i], geom.getTexCoordArray(i), false, osg::Array::BIND_PER_VERTEX);
geom.setTexCoordArray(i,0);
}
else
{
osg::notify(osg::NOTICE)<<"Found empty TexCoordArray("<<i<<")"<<std::endl;
}
}
}
void RigGeometry::copyFrom(osg::Geometry& from)
{
bool copyToSelf = (this==&from);
osg::Geometry& target = *this;
if (!copyToSelf) target.setStateSet(from.getStateSet());
// copy over primitive sets.
if (!copyToSelf) target.getPrimitiveSetList() = from.getPrimitiveSetList();
if (from.getVertexArray())
{
if (!copyToSelf) target.setVertexArray(from.getVertexArray());
}
if (from.getNormalArray())
{
if (!copyToSelf) target.setNormalArray(from.getNormalArray());
}
if (from.getColorArray())
{
if (!copyToSelf) target.setColorArray(from.getColorArray());
}
if (from.getSecondaryColorArray())
{
if (!copyToSelf) target.setSecondaryColorArray(from.getSecondaryColorArray());
}
if (from.getFogCoordArray())
{
if (!copyToSelf) target.setFogCoordArray(from.getFogCoordArray());
}
for(unsigned int ti=0;ti<from.getNumTexCoordArrays();++ti)
{
if (from.getTexCoordArray(ti))
{
if (!copyToSelf) target.setTexCoordArray(ti,from.getTexCoordArray(ti));
}
}
osg::Geometry::ArrayList& arrayList = from.getVertexAttribArrayList();
for(unsigned int vi=0;vi< arrayList.size();++vi)
{
osg::Array* array = arrayList[vi].get();
if (array)
{
if (!copyToSelf) target.setVertexAttribArray(vi,array);
}
}
}
VertexAttribComparitor(osg::Geometry& geometry)
{
add(geometry.getVertexArray());
add(geometry.getNormalArray());
add(geometry.getColorArray());
add(geometry.getSecondaryColorArray());
add(geometry.getFogCoordArray());
unsigned int i;
for(i=0;i<geometry.getNumTexCoordArrays();++i)
{
add(geometry.getTexCoordArray(i));
}
for(i=0;i<geometry.getNumVertexAttribArrays();++i)
{
add(geometry.getVertexAttribArray(i));
}
}
void Tessellator::retessellatePolygons(osg::Geometry &geom)
{
#ifdef OSG_GLU_AVAILABLE
// turn the contour list into primitives, a little like Tessellator does but more generally
osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
if (!vertices || vertices->empty() || geom.getPrimitiveSetList().empty()) return;
// we currently don't handle geometry which use indices...
if (geom.getVertexIndices() ||
geom.getNormalIndices() ||
geom.getColorIndices() ||
geom.getSecondaryColorIndices() ||
geom.getFogCoordIndices()) return;
// not even text coord indices don't handle geometry which use indices...
for(unsigned int unit=0;unit<geom.getNumTexCoordArrays();++unit)
{
if (geom.getTexCoordIndices(unit)) return;
}
if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE) _numberVerts=0; // 09.04.04 GWM reset Tessellator
// the reset is needed by the flt loader which reuses a Tessellator for triangulating polygons.
// as such it might be reset by other loaders/developers in future.
_index=0; // reset the counter for indexed vertices
_extraPrimitives = 0;
if (!_numberVerts) {
_numberVerts=geom.getVertexArray()->getNumElements();
// save the contours for complex (winding rule) tessellations
_Contours=geom.getPrimitiveSetList();
}
// now cut out vertex attributes added on any previous tessellation
reduceArray(geom.getVertexArray(), _numberVerts);
reduceArray(geom.getColorArray(), _numberVerts);
reduceArray(geom.getNormalArray(), _numberVerts);
reduceArray(geom.getFogCoordArray(), _numberVerts);
for(unsigned int unit1=0;unit1<geom.getNumTexCoordArrays();++unit1)
{
reduceArray(geom.getTexCoordArray(unit1), _numberVerts);
}
// remove the existing primitives.
unsigned int nprimsetoriginal= geom.getNumPrimitiveSets();
if (nprimsetoriginal) geom.removePrimitiveSet(0, nprimsetoriginal);
// the main difference from osgUtil::Tessellator for Geometry sets of multiple contours is that the begin/end tessellation
// occurs around the whole set of contours.
if (_ttype==TESS_TYPE_GEOMETRY) {
beginTessellation();
gluTessProperty(_tobj, GLU_TESS_WINDING_RULE, _wtype);
gluTessProperty(_tobj, GLU_TESS_BOUNDARY_ONLY , _boundaryOnly);
}
// process all the contours into the Tessellator
int noContours = _Contours.size();
int currentPrimitive = 0;
for(int primNo=0;primNo<noContours;++primNo)
{
osg::ref_ptr<osg::PrimitiveSet> primitive = _Contours[primNo].get();
if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE)
{ // this recovers the 'old' tessellation which just retessellates single polygons.
if (primitive->getMode()==osg::PrimitiveSet::POLYGON || _ttype==TESS_TYPE_DRAWABLE)
{
if (primitive->getType()==osg::PrimitiveSet::DrawArrayLengthsPrimitiveType)
{
osg::DrawArrayLengths* drawArrayLengths = static_cast<osg::DrawArrayLengths*>(primitive.get());
unsigned int first = drawArrayLengths->getFirst();
for(osg::DrawArrayLengths::iterator itr=drawArrayLengths->begin();
itr!=drawArrayLengths->end();
++itr)
{
beginTessellation();
unsigned int last = first + *itr;
addContour(primitive->getMode(),first,last,vertices);
first = last;
endTessellation();
collectTessellation(geom, currentPrimitive);
currentPrimitive++;
}
}
else
{
if (primitive->getNumIndices()>3) { // April 2005 gwm only retessellate "complex" polygons
beginTessellation();
addContour(primitive.get(), vertices);
endTessellation();
collectTessellation(geom, currentPrimitive);
currentPrimitive++;
} else { // April 2005 gwm triangles don't need to be retessellated
geom.addPrimitiveSet(primitive.get());
}
}
}
else
{ // copy the contour primitive as it is not being tessellated
geom.addPrimitiveSet(primitive.get());
}
} else {
if (primitive->getMode()==osg::PrimitiveSet::POLYGON ||
primitive->getMode()==osg::PrimitiveSet::QUADS ||
primitive->getMode()==osg::PrimitiveSet::TRIANGLES ||
primitive->getMode()==osg::PrimitiveSet::LINE_LOOP ||
primitive->getMode()==osg::PrimitiveSet::QUAD_STRIP ||
primitive->getMode()==osg::PrimitiveSet::TRIANGLE_FAN ||
primitive->getMode()==osg::PrimitiveSet::TRIANGLE_STRIP)
{
addContour(primitive.get(), vertices);
} else { // copy the contour primitive as it is not being tessellated
// in this case points, lines or line_strip
geom.addPrimitiveSet(primitive.get());
}
}
}
if (_ttype==TESS_TYPE_GEOMETRY) {
endTessellation();
collectTessellation(geom, 0);
}
#endif
}