void TaskPocketParameters::onButtonFace(const bool pressed) {
PartDesign::Pocket* pcPocket = static_cast<PartDesign::Pocket*>(PocketView->getObject());
Part::Feature* support = pcPocket->getSupport();
if (support == NULL) {
// There is no support, so we can't select from it...
return;
}
if (pressed) {
Gui::Document* doc = Gui::Application::Instance->activeDocument();
if (doc) {
doc->setHide(PocketView->getObject()->getNameInDocument());
doc->setShow(support->getNameInDocument());
}
Gui::Selection().clearSelection();
Gui::Selection().addSelectionGate
(new ReferenceSelection(support, false, true, false));
} else {
Gui::Selection().rmvSelectionGate();
Gui::Document* doc = Gui::Application::Instance->activeDocument();
if (doc) {
doc->setShow(PocketView->getObject()->getNameInDocument());
doc->setHide(support->getNameInDocument());
}
}
// Update button if onButtonFace() is called explicitly
ui->buttonFace->setChecked(pressed);
}
bool TaskDlgPocketParameters::accept()
{
std::string name = PocketView->getObject()->getNameInDocument();
try {
//Gui::Command::openCommand("Pocket changed");
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.Length = %f",name.c_str(),parameter->getLength());
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.Type = %u",name.c_str(),parameter->getMode());
std::string facename = parameter->getFaceName().data();
PartDesign::Pocket* pcPocket = static_cast<PartDesign::Pocket*>(PocketView->getObject());
Part::Feature* support = pcPocket->getSupport();
if (support != NULL && !facename.empty()) {
QString buf = QString::fromUtf8("(App.ActiveDocument.%1,[\"%2\"])");
buf = buf.arg(QString::fromUtf8(support->getNameInDocument()));
buf = buf.arg(QString::fromStdString(facename));
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.UpToFace = %s", name.c_str(), buf.toStdString().c_str());
} else
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.UpToFace = None", name.c_str());
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.recompute()");
if (!PocketView->getObject()->isValid())
throw Base::Exception(PocketView->getObject()->getStatusString());
Gui::Command::doCommand(Gui::Command::Gui,"Gui.activeDocument().resetEdit()");
Gui::Command::commitCommand();
}
catch (const Base::Exception& e) {
QMessageBox::warning(parameter, tr("Input error"), QString::fromAscii(e.what()));
return false;
}
return true;
}
void TaskPadParameters::apply()
{
std::string name = PadView->getObject()->getNameInDocument();
const char * cname = name.c_str();
ui->lengthEdit->apply();
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.Reversed = %i",cname,getReversed()?1:0);
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.Midplane = %i",cname,getMidplane()?1:0);
ui->lengthEdit2->apply();
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.Type = %u",cname,getMode());
std::string facename = getFaceName().data();
PartDesign::Pad* pcPad = static_cast<PartDesign::Pad*>(PadView->getObject());
Part::Feature* support = pcPad->getSupport();
if (support != NULL && !facename.empty()) {
QString buf = QString::fromUtf8("(App.ActiveDocument.%1,[\"%2\"])");
buf = buf.arg(QString::fromUtf8(support->getNameInDocument()));
buf = buf.arg(QString::fromStdString(facename));
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.UpToFace = %s", cname, buf.toStdString().c_str());
} else
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.UpToFace = None", cname);
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.recompute()");
if (!PadView->getObject()->isValid())
throw Base::Exception(PadView->getObject()->getStatusString());
Gui::Command::doCommand(Gui::Command::Gui,"Gui.activeDocument().resetEdit()");
Gui::Command::commitCommand();
}
void TaskPocketParameters::onSelectionChanged(const Gui::SelectionChanges& msg)
{
if (msg.Type == Gui::SelectionChanges::AddSelection) {
// Don't allow selection in other document
if (strcmp(msg.pDocName, PocketView->getObject()->getDocument()->getName()) != 0)
return;
if (!msg.pSubName || msg.pSubName[0] == '\0')
return;
std::string subName(msg.pSubName);
if (subName.substr(0,4) != "Face")
return;
int faceId = std::atoi(&subName[4]);
// Don't allow selection outside of support
PartDesign::Pocket* pcPocket = static_cast<PartDesign::Pocket*>(PocketView->getObject());
Part::Feature* support = pcPocket->getSupport();
if (support == NULL) {
// There is no support, so we can't select from it...
// Turn off reference selection mode
onButtonFace(false);
return;
}
if (strcmp(msg.pObjectName, support->getNameInDocument()) != 0)
return;
std::vector<std::string> upToFaces(1,subName);
pcPocket->UpToFace.setValue(support, upToFaces);
if (updateView())
pcPocket->getDocument()->recomputeFeature(pcPocket);
ui->lineFaceName->blockSignals(true);
ui->lineFaceName->setText(tr("Face") + QString::number(faceId));
ui->lineFaceName->setProperty("FaceName", QByteArray(subName.c_str()));
ui->lineFaceName->blockSignals(false);
// Turn off reference selection mode
onButtonFace(false);
}
else if (msg.Type == Gui::SelectionChanges::ClrSelection) {
ui->lineFaceName->blockSignals(true);
ui->lineFaceName->setText(tr("No face selected"));
ui->lineFaceName->setProperty("FaceName", QByteArray());
ui->lineFaceName->blockSignals(false);
}
}
void CmdFemAddPart::activated(int iMsg)
{
#ifndef FCWithNetgen
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
QObject::tr("Your FreeCAD is build without NETGEN support. Meshing will not work...."));
return;
#endif
std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
if (selection.size() != 1) {
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
QObject::tr("Select an edge, face or body. Only one body is allowed."));
return;
}
if (!selection[0].isObjectTypeOf(Part::Feature::getClassTypeId())){
QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong object type"),
QObject::tr("Fillet works only on parts"));
return;
}
Part::Feature *base = static_cast<Part::Feature*>(selection[0].getObject());
std::string AnalysisName = getUniqueObjectName("FemAnalysis");
std::string MeshName = getUniqueObjectName((std::string(base->getNameInDocument()) +"_Mesh").c_str());
openCommand("Create FEM analysis");
doCommand(Doc,"App.activeDocument().addObject('Fem::FemAnalysis','%s')",AnalysisName.c_str());
doCommand(Doc,"App.activeDocument().addObject('Fem::FemMeshShapeNetgenObject','%s')",MeshName.c_str());
doCommand(Doc,"App.activeDocument().ActiveObject.Shape = App.activeDocument().%s",base->getNameInDocument());
doCommand(Doc,"App.activeDocument().%s.Member = App.activeDocument().%s",AnalysisName.c_str(),MeshName.c_str());
addModule(Gui,"FemGui");
doCommand(Gui,"FemGui.setActiveAnalysis(App.activeDocument().%s)",AnalysisName.c_str());
commitCommand();
updateActive();
}
void CmdPartDesignMigrate::activated(int iMsg)
{
Q_UNUSED(iMsg);
App::Document *doc = getDocument();
std::set<PartDesign::Feature*> migrateFeatures;
// Retrive all PartDesign Features objects and filter out features already belongs to some body
for ( const auto & feat: doc->getObjects( ) ) {
if( feat->isDerivedFrom( PartDesign::Feature::getClassTypeId() ) &&
!PartDesign::Body::findBodyOf( feat ) && PartDesign::Body::isSolidFeature ( feat ) ) {
migrateFeatures.insert ( static_cast <PartDesign::Feature *>( feat ) );
}
}
if ( migrateFeatures.empty() ) {
if ( !PartDesignGui::isModernWorkflow ( doc ) ) {
// If there is nothing to migrate and workflow is still old just set it to modern
PartDesignGui::WorkflowManager::instance()->forceWorkflow (
doc, PartDesignGui::Workflow::Modern );
} else {
// Huh? nothing to migrate?
QMessageBox::warning ( 0, QObject::tr ( "Nothing to migrate" ),
QObject::tr ( "No PartDesign features which doesn't belong to a body found."
" Nothing to migrate." ) );
}
return;
}
// Note: this action is undoable, should it be?
PartDesignGui::WorkflowManager::instance()->forceWorkflow ( doc, PartDesignGui::Workflow::Modern );
// Put features into chains. Each chain should become a separate body.
std::list< std::list<PartDesign::Feature *> > featureChains;
std::list<PartDesign::Feature *> chain; //< the current chain we are working on
for (auto featIt = migrateFeatures.begin(); !migrateFeatures.empty(); ) {
Part::Feature *base = (*featIt)->getBaseObject( /*silent =*/ true );
chain.push_front ( *featIt );
if ( !base || !base->isDerivedFrom (PartDesign::Feature::getClassTypeId () ) ||
PartDesignGui::isAnyNonPartDesignLinksTo ( static_cast <PartDesign::Feature *>(base),
/*respectGroups=*/ true ) ) {
// a feature based on nothing as well as on non-partdesign solid starts a new chain
auto newChainIt = featureChains.emplace (featureChains.end());
newChainIt->splice (newChainIt->end(), chain);
} else {
// we are basing on some partdesign feature which supposed to belong to some body
PartDesign::Feature *baseFeat = static_cast <PartDesign::Feature *>( base );
auto baseFeatSetIt = find ( migrateFeatures.begin (), migrateFeatures.end (), baseFeat );
if ( baseFeatSetIt != migrateFeatures.end() ) {
// base feature is pending for migration, switch to it and continue over
migrateFeatures.erase(featIt);
featIt = baseFeatSetIt;
continue;
} else {
// The base feature seems already assigned to some chain
// Find which
std::list<PartDesign::Feature *>::iterator baseFeatIt;
auto chainIt = std::find_if( featureChains.begin(), featureChains.end(),
[baseFeat, &baseFeatIt] ( std::list<PartDesign::Feature *>&chain ) mutable -> bool {
baseFeatIt = std::find( chain.begin(), chain.end(), baseFeat );
return baseFeatIt != chain.end();
} );
if ( chainIt != featureChains.end() ) {
assert (baseFeatIt != chainIt->end());
if ( std::next ( baseFeatIt ) == chainIt->end() ) {
// just append our chain to already found
chainIt->splice ( chainIt->end(), chain );
// TODO If we will hit a third part everything will be messed up again.
// Probably it will require a yet another smart-ass find_if. (2015-08-10, Fat-Zer)
} else {
// We have a fork of a partDesign feature here
// add a chain for current body
auto newChainIt = featureChains.emplace (featureChains.end());
newChainIt->splice (newChainIt->end(), chain);
// add a chain for forked one
newChainIt = featureChains.emplace (featureChains.end());
newChainIt->splice (newChainIt->end(), *chainIt,
std::next ( baseFeatIt ), chainIt->end());
}
} else {
// The feature is not present in list pending for migration,
// This generally shouldn't happen but may be if we run into some broken file
// Try to find out the body we should insert into
// TODO Some error/warning is needed here (2015-08-10, Fat-Zer)
auto newChainIt = featureChains.emplace (featureChains.end());
newChainIt->splice (newChainIt->end(), chain);
}
}
}
migrateFeatures.erase ( featIt );
featIt = migrateFeatures.begin ();
// TODO Align visibility (2015-08-17, Fat-Zer)
} /* for */
// TODO make it work without parts (2015-09-04, Fat-Zer)
// add a part if there is no active yet
App::Part *actPart = PartDesignGui::assertActivePart ();
if (!actPart) {
return;
}
// do the actual migration
Gui::Command::openCommand("Migrate legacy part design features to Bodies");
for ( auto chainIt = featureChains.begin(); !featureChains.empty();
featureChains.erase (chainIt), chainIt = featureChains.begin () ) {
#ifndef FC_DEBUG
if ( chainIt->empty () ) { // prevent crash in release in case of errors
continue;
}
#else
assert ( !chainIt->empty () );
#endif
Part::Feature *base = chainIt->front()->getBaseObject ( /*silent =*/ true );
// Find a suitable chain to work with
for( ; chainIt != featureChains.end(); chainIt ++) {
base = chainIt->front()->getBaseObject ( /*silent =*/ true );
if (!base || !base->isDerivedFrom ( PartDesign::Feature::getClassTypeId () ) ) {
break; // no base is ok
} else {
// The base feature is a PartDesign, it's a fork, try to reassign it to a body...
base = PartDesign::Body::findBodyOf ( base );
if ( base ) {
break;
}
}
}
if ( chainIt == featureChains.end() ) {
// Shouldn't happen, may be only in case of some circular dependency?
// TODO Some error message (2015-08-11, Fat-Zer)
chainIt = featureChains.begin();
base = chainIt->front()->getBaseObject ( /*silent =*/ true );
}
// Construct a Pretty Body name based on the Tip
std::string bodyName = getUniqueObjectName (
std::string ( chainIt->back()->getNameInDocument() ).append ( "Body" ).c_str () ) ;
// Create a body for the chain
doCommand ( Doc,"App.activeDocument().addObject('PartDesign::Body','%s')", bodyName.c_str () );
doCommand ( Doc,"App.activeDocument().%s.addObject(App.ActiveDocument.%s)",
actPart->getNameInDocument (), bodyName.c_str () );
if (base) {
doCommand ( Doc,"App.activeDocument().%s.BaseFeature = App.activeDocument().%s",
bodyName.c_str (), base->getNameInDocument () );
}
// Fill the body with features
for ( auto feature: *chainIt ) {
if ( feature->isDerivedFrom ( PartDesign::ProfileBased::getClassTypeId() ) ) {
// add the sketch and also reroute it if needed
PartDesign::ProfileBased *sketchBased = static_cast<PartDesign::ProfileBased *> ( feature );
Part::Part2DObject *sketch = sketchBased->getVerifiedSketch( /*silent =*/ true);
if ( sketch ) {
doCommand ( Doc,"App.activeDocument().%s.addObject(App.activeDocument().%s)",
bodyName.c_str (), sketch->getNameInDocument() );
if ( sketch->isDerivedFrom ( Sketcher::SketchObject::getClassTypeId() ) ) {
try {
PartDesignGui::fixSketchSupport ( static_cast<Sketcher::SketchObject *> ( sketch ) );
} catch (Base::Exception &) {
QMessageBox::critical(Gui::getMainWindow(),
QObject::tr("Sketch plane cannot be migrated"),
QObject::tr("Please edit '%1' and redefine it to use a Base or "
"Datum plane as the sketch plane.").
arg(QString::fromUtf8(sketch->Label.getValue()) ) );
}
} else {
// TODO Message that sketchbased is based not on a sketch (2015-08-11, Fat-Zer)
}
}
}
doCommand ( Doc,"App.activeDocument().%s.addObject(App.activeDocument().%s)",
bodyName.c_str (), feature->getNameInDocument() );
PartDesignGui::relinkToBody ( feature );
}
}
updateActive();
}
void CmdPathShape::activated(int iMsg)
{
std::vector<Gui::SelectionSingleton::SelObj> Sel = getSelection().getSelection();
if (Sel.size() == 1) {
if (Sel[0].pObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
Part::Feature *pcPartObject = dynamic_cast<Part::Feature*>(Sel[0].pObject);
std::string FeatName = getUniqueObjectName("PathShape");
openCommand("Create Path Compound");
doCommand(Doc,"FreeCAD.activeDocument().addObject('Path::FeatureShape','%s')",FeatName.c_str());
doCommand(Doc,"FreeCAD.activeDocument().%s.Shape = FreeCAD.activeDocument().%s.Shape.copy()",FeatName.c_str(),pcPartObject->getNameInDocument());
commitCommand();
updateActive();
} else {
Base::Console().Error("Exactly one shape object must be selected\n");
return;
}
} else {
Base::Console().Error("Exactly one shape object must be selected\n");
return;
}
}