Пример #1
0
void CmdTechDrawNewView::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = DrawGuiUtil::findPage(this);
    if (!page) {
        return;
    }

    std::vector<App::DocumentObject*> shapes = getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
    if (shapes.empty()) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("Select at least 1 Part object."));
        return;
    }

    std::string PageName = page->getNameInDocument();

    Gui::WaitCursor wc;
    const auto selectedProjections( getSelection().getObjectsOfType(TechDraw::DrawView::getClassTypeId()) );

    float newScale = 1.0;
    float newRotation = 0.0;
    Base::Vector3d newDirection(0.0, 0.0, 1.0);
    if (!selectedProjections.empty()) {
        const auto myView( static_cast<TechDraw::DrawView*>(selectedProjections.front()) );

        newScale = myView->Scale.getValue();
        newRotation = myView->Rotation.getValue();

        // The "Direction" property does not belong to TechDraw::DrawView, but to one of the
        // many child classes that are projecting objects into the drawing. Therefore, we get the
        // property by name.
        const App::PropertyVector* const propDirection = dynamic_cast<App::PropertyVector*>(myView->getPropertyByName("Direction"));
        if (propDirection) {
            newDirection = propDirection->getValue();
        }
    }

    openCommand("Create view");
    for (std::vector<App::DocumentObject*>::iterator it = shapes.begin(); it != shapes.end(); ++it) {
        std::string FeatName = getUniqueObjectName("View");
        doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewPart','%s')",FeatName.c_str());
        doCommand(Doc,"App.activeDocument().%s.Source = App.activeDocument().%s",FeatName.c_str(),(*it)->getNameInDocument());
        doCommand(Doc,"App.activeDocument().%s.Direction = (%e,%e,%e)",FeatName.c_str(), newDirection.x, newDirection.y, newDirection.z);
        doCommand(Doc,"App.activeDocument().%s.Scale = %e",FeatName.c_str(), newScale);
        doCommand(Doc,"App.activeDocument().%s.Rotation = %e",FeatName.c_str(), newRotation);
        doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());
    }
    updateActive();
    commitCommand();
}
void CmdTechDrawLinkDimension::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = DrawGuiUtil::findPage(this);
    if (!page) {
        return;
    }
    std::string PageName = page->getNameInDocument();

    bool result = _checkSelection(this,2);
    if (!result)
        return;

    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();

    App::DocumentObject* obj3D = 0;
    std::vector<App::DocumentObject*> parts;
    std::vector<std::string> subs;

    std::vector<Gui::SelectionObject>::iterator itSel = selection.begin();
    for (; itSel != selection.end(); itSel++)  {
        if ((*itSel).getObject()->isDerivedFrom(Part::Feature::getClassTypeId())) {
            obj3D = ((*itSel).getObject());
            std::vector<std::string> subList = (*itSel).getSubNames();
            for (auto& s:subList) {
                parts.push_back(obj3D);
                subs.push_back(s);
            }
        }
    }

    if (!obj3D) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr("There is no 3D object in your selection"));
        return;
    }

    if (subs.empty()) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr("There are no 3D Edges or Vertices in your selection"));
        return;
    }


    // dialog to select the Dimension to link
    Gui::Control().showDialog(new TaskDlgLinkDim(parts,subs,page));

    page->getDocument()->recompute();                                  //still need to recompute in Gui. why?
}
Пример #3
0
void CmdTechDrawAnnotation::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = _findPage(this);
    if (!page) {
        return;
    }
    std::string PageName = page->getNameInDocument();

    std::string FeatName = getUniqueObjectName("Annotation");
    openCommand("Create Annotation");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewAnnotation','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());
    updateActive();
    commitCommand();
}
Пример #4
0
void CmdTechDrawNewViewSection::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    //TODO: should just use BaseView's page
    TechDraw::DrawPage* page = _findPage(this);
    if (!page) {
        return;
    }

    //std::vector<App::DocumentObject*> shapes = getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
    std::vector<App::DocumentObject*> shapes = getSelection().getObjectsOfType(TechDraw::DrawViewPart::getClassTypeId());
    if (shapes.empty()) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("Select at least 1 DrawingView object."));
        return;
    }
    App::DocumentObject* dObj = *(shapes.begin());
    TechDraw::DrawViewPart* dvp = static_cast<TechDraw::DrawViewPart*>(dObj);
    if (dvp->getSectionRef()) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("This View already has a related Section. Choose another."));
        return;
    }

    std::string PageName = page->getNameInDocument();

    Gui::WaitCursor wc;
    openCommand("Create view");

    std::string FeatName = getUniqueObjectName("Section");
    std::string SourceName = dvp->Source.getValue()->getNameInDocument();
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewSection','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Source = App.activeDocument().%s",FeatName.c_str(),SourceName.c_str());
    doCommand(Doc,"App.activeDocument().%s.BaseView = App.activeDocument().%s",FeatName.c_str(),(dObj)->getNameInDocument());
    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());
    App::DocumentObject *docObj = getDocument()->getObject(FeatName.c_str());
    TechDraw::DrawViewSection* dsv = dynamic_cast<TechDraw::DrawViewSection *>(docObj);
    if (!dsv) {
        throw Base::Exception("CmdTechDrawNewViewSection DSV not found\n");
    }
    Gui::Control().showDialog(new TaskDlgSectionView(dvp,dsv));

    updateActive();
    commitCommand();
}
Пример #5
0
void CmdTechDrawProjGroup::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = _findPage(this);
    if (!page) {
        return;
    }

    std::vector<App::DocumentObject*> shapes = getSelection().getObjectsOfType(Part::Feature::getClassTypeId());
    if (shapes.size() != 1) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("Select exactly 1 Part object."));
        return;
    }
    std::string PageName = page->getNameInDocument();

    Gui::WaitCursor wc;

    openCommand("Create Projection Group");
    std::string multiViewName = getUniqueObjectName("cView");
    std::string SourceName = (*shapes.begin())->getNameInDocument();
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawProjGroup','%s')",multiViewName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Source = App.activeDocument().%s",multiViewName.c_str(),SourceName.c_str());

    App::DocumentObject *docObj = getDocument()->getObject(multiViewName.c_str());
    auto multiView( static_cast<TechDraw::DrawProjGroup *>(docObj) );

    // set the anchor
    std::string anchor = "Front";
    doCommand(Doc,"App.activeDocument().%s.addProjection('%s')",multiViewName.c_str(),anchor.c_str());
    doCommand(Doc,"App.activeDocument().%s.Anchor = App.activeDocument().%s.getItemByLabel('%s')",
              multiViewName.c_str(),multiViewName.c_str(),anchor.c_str());
    // add the multiView to the page
    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),multiViewName.c_str());

    // create the rest of the desired views
    Gui::Control().showDialog(new TaskDlgProjGroup(multiView,true));

//    // add the multiView to the page
//    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),multiViewName.c_str());

    updateActive();
    commitCommand();
}
Пример #6
0
void CmdTechDrawClip::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = _findPage(this);
    if (!page) {
        return;
    }
    std::string PageName = page->getNameInDocument();

    std::string FeatName = getUniqueObjectName("Clip");
    openCommand("Create Clip");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewClip','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.ShowFrame = True",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Height = 30.0",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Width = 30.0",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.ShowLabels = False",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());
    updateActive();
    commitCommand();
}
Пример #7
0
void CmdTechDrawToggleFrame::activated(int iMsg)
{
    TechDraw::DrawPage* page = _findPageCD(this);
    if (!page) {
        return;
    }
    std::string PageName = page->getNameInDocument();

    Gui::Document* activeGui = Gui::Application::Instance->getDocument(page->getDocument());
    Gui::ViewProvider* vp = activeGui->getViewProvider(page);
    ViewProviderPage* dvp = dynamic_cast<ViewProviderPage*>(vp);

    if (dvp  && dvp->getMDIViewPage()) {
        dvp->getMDIViewPage()->setFrameState(!dvp->getMDIViewPage()->getFrameState());
    } else {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No TechDraw Page"),
            QObject::tr("Need a TechDraw Page for this command"));
        return;
    }
}
Пример #8
0
void CmdTechDrawExportPage::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    TechDraw::DrawPage* page = _findPage(this);
    if (!page) {
        return;
    }
    std::string PageName = page->getNameInDocument();

    Gui::Document* activeGui = Gui::Application::Instance->getDocument(page->getDocument());
    Gui::ViewProvider* vp = activeGui->getViewProvider(page);
    ViewProviderPage* dvp = dynamic_cast<ViewProviderPage*>(vp);

    if (dvp  && dvp->getMDIViewPage()) {
        dvp->getMDIViewPage()->saveSVG();
    } else {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("No Drawing View"),
            QObject::tr("Open Drawing View before attempting export to SVG."));
        return;
    }
}
Пример #9
0
void CmdTechDrawNewHatch::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    if (!_checkSelectionHatch(this)) {
        return;
    }

    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
    auto objFeat( dynamic_cast<TechDraw::DrawViewPart *>(selection[0].getObject()) );
    if( objFeat == nullptr ) {
        return;
    }
    const std::vector<std::string> &subNames = selection[0].getSubNames();
    TechDraw::DrawPage* page = objFeat->findParentPage();
    std::string PageName = page->getNameInDocument();

    std::string FeatName = getUniqueObjectName("Hatch");
    std::stringstream featLabel;
    featLabel << FeatName << "F" << TechDraw::DrawUtil::getIndexFromName(subNames.at(0));

    openCommand("Create Hatch");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawHatch','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Label = '%s'",FeatName.c_str(),featLabel.str().c_str());

    auto hatch( static_cast<TechDraw::DrawHatch *>(getDocument()->getObject(FeatName.c_str())) );
    hatch->Source.setValue(objFeat, subNames);
    //should this be: doCommand(Doc,"App..Feat..Source = [(App...%s,%s),(App..%s,%s),...]",objs[0]->getNameInDocument(),subs[0],...);
    //seems very unwieldy

    commitCommand();

    //Horrible hack to force Tree update  ??still required??
    double x = objFeat->X.getValue();
    objFeat->X.setValue(x);
    getDocument()->recompute();
}
void CmdTechDrawNewAngle3PtDimension::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    bool result = _checkSelection(this,3);
    if (!result)
        return;
    result = _checkDrawViewPart(this);
    if (!result)
        return;

    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
    TechDraw::DrawViewPart * objFeat = 0;
    std::vector<std::string> SubNames;

    std::vector<Gui::SelectionObject>::iterator itSel = selection.begin();
    for (; itSel != selection.end(); itSel++)  {
        if ((*itSel).getObject()->isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
            objFeat = static_cast<TechDraw::DrawViewPart*> ((*itSel).getObject());
            SubNames = (*itSel).getSubNames();
        }
    }
    TechDraw::DrawPage* page = objFeat->findParentPage();
    std::string PageName = page->getNameInDocument();

    TechDraw::DrawViewDimension *dim = 0;
    std::string FeatName = getUniqueObjectName("Dimension");

    std::vector<App::DocumentObject *> objs;
    std::vector<std::string> subs;

    if (_isValidVertexes(this, 3))  {
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
        subs.push_back(SubNames[2]);
    } else {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr("Need three points to make an 3 point Angle Dimension"));
        return;
    }

    openCommand("Create Dimension");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewDimension','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Type = '%s'",FeatName.c_str()
                                                       ,"Angle3Pt");

    dim = dynamic_cast<TechDraw::DrawViewDimension *>(getDocument()->getObject(FeatName.c_str()));
    if (!dim) {
        throw Base::Exception("CmdTechDrawNewAngle3PtDimension - dim not found\n");
    }
    dim->References2D.setValues(objs, subs);

    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());

    commitCommand();
    dim->recomputeFeature();

    //Horrible hack to force Tree update
    double x = objFeat->X.getValue();
    objFeat->X.setValue(x);
}
void CmdTechDrawNewDistanceYDimension::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    bool result = _checkSelection(this,2);
    if (!result)
        return;
    result = _checkDrawViewPart(this);
    if (!result)
        return;

    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
    TechDraw::DrawViewPart * objFeat = 0;
    std::vector<std::string> SubNames;

    std::vector<Gui::SelectionObject>::iterator itSel = selection.begin();
    for (; itSel != selection.end(); itSel++)  {
        if ((*itSel).getObject()->isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
            objFeat = static_cast<TechDraw::DrawViewPart*> ((*itSel).getObject());
            SubNames = (*itSel).getSubNames();
        }
    }
    TechDraw::DrawPage* page = objFeat->findParentPage();
    std::string PageName = page->getNameInDocument();

    TechDraw::DrawViewDimension *dim = 0;
    std::string FeatName = getUniqueObjectName("Dimension");
    std::string dimType;

    std::vector<App::DocumentObject *> objs;
    std::vector<std::string> subs;

    int edgeType = _isValidSingleEdge(this);
    if ((edgeType == isVertical) ||
        (edgeType == isDiagonal)) {
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
    } else if (_isValidVertexes(this)) {
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
    } else if ((_isValidEdgeToEdge(this) == isVertical)   ||
               (_isValidEdgeToEdge(this) == isHorizontal) ||
               (_isValidEdgeToEdge(this) == isDiagonal) ||
               (_isValidEdgeToEdge(this) == isAngle))  {
        edgeType = _isValidEdgeToEdge(this);
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
    } else if (_isValidVertexToEdge(this)) {
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
    } else {
        std::stringstream edgeMsg;
        edgeMsg << "Need 2 Vertexes, 1 straight Edge, 1 Vertex/1 straight edge or 2 straight Edges for Horizontal Dimension (edge type: " << _edgeTypeToText(edgeType) << ")";
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr(edgeMsg.str().c_str()));
        return;
    }

    openCommand("Create Dimension");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewDimension','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Type = '%s'",FeatName.c_str()
                                                       ,"DistanceY");
    dim = dynamic_cast<TechDraw::DrawViewDimension *>(getDocument()->getObject(FeatName.c_str()));
    if (!dim) {
        throw Base::Exception("CmdTechDrawNewDistanceYDimension - dim not found\n");
    }
    dim->References2D.setValues(objs, subs);

    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());

    commitCommand();
    dim->recomputeFeature();
    TechDraw::pointPair pp = dim->getLinearPoints();
    Base::Vector3d mid = (pp.first + pp.second)/2.0;
    dim->X.setValue(mid.x);
    dim->Y.setValue(-mid.y);

    //Horrible hack to force Tree update
    double x = objFeat->X.getValue();
    objFeat->X.setValue(x);
}
void CmdTechDrawNewDiameterDimension::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    bool result = _checkSelection(this,1);
    if (!result)
        return;
    result = _checkDrawViewPart(this);
    if (!result)
        return;

    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
    TechDraw::DrawViewPart * objFeat = 0;
    std::vector<std::string> SubNames;

    std::vector<Gui::SelectionObject>::iterator itSel = selection.begin();
    for (; itSel != selection.end(); itSel++)  {
        if ((*itSel).getObject()->isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
            objFeat = static_cast<TechDraw::DrawViewPart*> ((*itSel).getObject());
            SubNames = (*itSel).getSubNames();
        }
    }
    TechDraw::DrawPage* page = objFeat->findParentPage();
    std::string PageName = page->getNameInDocument();

    TechDraw::DrawViewDimension *dim = 0;
    std::string FeatName = getUniqueObjectName("Dimension");

    std::vector<App::DocumentObject *> objs;
    std::vector<std::string> subs;

    int edgeType = _isValidSingleEdge(this);
    if (edgeType == isCircle) {
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
    } else if (edgeType == isBSplineCircle) {
        QMessageBox::StandardButton result =
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Selection Warning"),
                                                   QObject::tr("Selected edge is a BSpline.  Diameter will be approximate."),
                                                   QMessageBox::Ok | QMessageBox::Cancel,
                                                   QMessageBox::Cancel);
        if (result == QMessageBox::Ok) {
            objs.push_back(objFeat);
            subs.push_back(SubNames[0]);
        } else {
            return;
        }
    } else {
        std::stringstream edgeMsg;
        edgeMsg << "Selection for Diameter does not contain a circular edge (edge type: " << _edgeTypeToText(edgeType) << ")";
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr(edgeMsg.str().c_str()));
        return;
    }

    openCommand("Create Dimension");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewDimension','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Type = '%s'",FeatName.c_str()
                                                       ,"Diameter");

    dim = dynamic_cast<TechDraw::DrawViewDimension *>(getDocument()->getObject(FeatName.c_str()));
    if (!dim) {
        throw Base::Exception("CmdTechDrawNewDiameterDimension - dim not found\n");
    }
    dim->References2D.setValues(objs, subs);

    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());

    commitCommand();
    dim->recomputeFeature();

    //Horrible hack to force Tree update
    double x = objFeat->X.getValue();
    objFeat->X.setValue(x);
}
void CmdTechDrawNewDimension::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    bool result = _checkSelection(this,2);
    if (!result)
        return;
    result = _checkDrawViewPart(this);
    if (!result)
        return;

//do we still need to pick DVPs out of selection? or should we complain about junk?
    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();
    TechDraw::DrawViewPart* objFeat = 0;
    std::vector<std::string> SubNames;
    std::vector<Gui::SelectionObject>::iterator itSel = selection.begin();
    for (; itSel != selection.end(); itSel++)  {
        if ((*itSel).getObject()->isDerivedFrom(TechDraw::DrawViewPart::getClassTypeId())) {
            objFeat = static_cast<TechDraw::DrawViewPart*> ((*itSel).getObject());
            SubNames = (*itSel).getSubNames();
        }
    }
    TechDraw::DrawPage* page = objFeat->findParentPage();
    std::string PageName = page->getNameInDocument();

    TechDraw::DrawViewDimension *dim = 0;
    std::string FeatName = getUniqueObjectName("Dimension");
    std::string dimType;

    std::vector<App::DocumentObject *> objs;
    std::vector<std::string> subs;

    int edgeType = _isValidSingleEdge(this);

    if (edgeType) {
        if (edgeType < isCircle) {
            dimType = "Distance";
            objs.push_back(objFeat);
            subs.push_back(SubNames[0]);
        } else if (edgeType == isCircle) {
            dimType = "Radius";
        } else {
            dimType = "Radius";
        }
    } else if (_isValidVertexes(this)) {
        dimType = "Distance";
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
    } else if (_isValidEdgeToEdge(this)) {
        int edgeCase = _isValidEdgeToEdge(this);
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
        switch (edgeCase) {
             case isHorizontal:
                dimType = "DistanceX";
                break;
             case isVertical:
                dimType = "DistanceY";
                break;
            case isDiagonal:
                dimType = "Distance";
                break;
            case isAngle:
                dimType = "Angle";
            default:
                break;
        }
    } else if (_isValidVertexToEdge(this)) {
        dimType = "Distance";
        objs.push_back(objFeat);
        objs.push_back(objFeat);
        subs.push_back(SubNames[0]);
        subs.push_back(SubNames[1]);
    } else {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Incorrect Selection"),
                                                   QObject::tr("Can't make a Dimension from this selection"));
        return;
    }

    openCommand("Create Dimension");
    doCommand(Doc,"App.activeDocument().addObject('TechDraw::DrawViewDimension','%s')",FeatName.c_str());
    doCommand(Doc,"App.activeDocument().%s.Type = '%s'",FeatName.c_str()
                                                       ,dimType.c_str());

    dim = dynamic_cast<TechDraw::DrawViewDimension *>(getDocument()->getObject(FeatName.c_str()));
    if (!dim) {
        throw Base::Exception("CmdTechDrawNewDimension - dim not found\n");
    }
    dim->References2D.setValues(objs, subs);

    doCommand(Doc,"App.activeDocument().%s.addView(App.activeDocument().%s)",PageName.c_str(),FeatName.c_str());
    commitCommand();
    dim->recomputeFeature();

    //Horrible hack to force Tree update
    double x = objFeat->X.getValue();
    objFeat->X.setValue(x);
}