/***********************************************************************
* Transmit thread
**********************************************************************/
static void tx_thread(uhd::usrp::multi_usrp::sptr usrp,
uhd::tx_streamer::sptr tx_stream,
const double tx_wave_freq,
const double tx_wave_ampl)
{
uhd::set_thread_priority_safe();
// set max TX gain
usrp->set_tx_gain(usrp->get_tx_gain_range().stop());
// setup variables and allocate buffer
uhd::tx_metadata_t md;
md.has_time_spec = false;
std::vector<samp_type> buff(tx_stream->get_max_num_samps() * 10);
// values for the wave table lookup
size_t index = 0;
const double tx_rate = usrp->get_tx_rate();
const size_t step = boost::math::iround(wave_table_len * tx_wave_freq / tx_rate);
wave_table table(tx_wave_ampl);
// fill buff and send until interrupted
while (not boost::this_thread::interruption_requested()) {
for (size_t i = 0; i < buff.size(); i++)
buff[i] = table(index += step);
tx_stream->send(&buff.front(), buff.size(), md);
}
// send a mini EOB packet
md.end_of_burst = true;
tx_stream->send("", 0, md);
}
/***********************************************************************
* transmit_worker function
* A function to be used as a boost::thread_group thread for transmitting
**********************************************************************/
void transmit_worker(
std::vector<std::complex<float> > buff,
wave_table_class wave_table,
uhd::tx_streamer::sptr tx_streamer,
uhd::tx_metadata_t metadata,
size_t step,
size_t index,
int num_channels
){
std::vector<std::complex<float> *> buffs(num_channels, &buff.front());
//send data until the signal handler gets called
while(not stop_signal_called){
//fill the buffer with the waveform
for (size_t n = 0; n < buff.size(); n++){
buff[n] = wave_table(index += step);
}
//send the entire contents of the buffer
tx_streamer->send(buffs, buff.size(), metadata);
metadata.start_of_burst = false;
metadata.has_time_spec = false;
}
//send a mini EOB packet
metadata.end_of_burst = true;
tx_streamer->send("", 0, metadata);
}
/*!
* Test the underflow message:
* Send a start of burst packet with no following end of burst.
* We expect to get an underflow(within a burst) async message.
*/
bool test_underflow_message(uhd::usrp::multi_usrp::sptr, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){
std::cout << "Test underflow message... " << std::flush;
uhd::tx_metadata_t md;
md.start_of_burst = true;
md.end_of_burst = false;
md.has_time_spec = false;
tx_stream->send("", 0, md);
uhd::async_metadata_t async_md;
if (not tx_stream->recv_async_msg(async_md, 1)){
std::cout << boost::format(
"failed:\n"
" Async message recv timed out.\n"
) << std::endl;
return false;
}
switch(async_md.event_code){
case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW:
std::cout << boost::format(
"success:\n"
" Got event code underflow message.\n"
) << std::endl;
return true;
default:
std::cout << boost::format(
"failed:\n"
" Got unexpected event code 0x%x.\n"
) % async_md.event_code << std::endl;
return false;
}
}
/***********************************************************************
* TX Hammer
**********************************************************************/
void tx_hammer(uhd::usrp::multi_usrp::sptr usrp, const std::string &tx_cpu, uhd::tx_streamer::sptr tx_stream){
uhd::set_thread_priority_safe();
uhd::tx_metadata_t md;
const size_t max_samps_per_packet = tx_stream->get_max_num_samps();
std::vector<char> buff(max_samps_per_packet*uhd::convert::get_bytes_per_item(tx_cpu));
std::vector<void *> buffs;
for (size_t ch = 0; ch < tx_stream->get_num_channels(); ch++)
buffs.push_back(&buff.front()); //same buffer for each channel
//print pre-test summary
std::cout << boost::format(
"Testing transmit rate %f Msps"
) % (usrp->get_tx_rate()/1e6) << std::endl;
//setup variables and allocate buffer
std::srand( time(NULL) );
while(not boost::this_thread::interruption_requested()){
size_t total_num_samps = rand() % 100000;
size_t num_acc_samps = 0;
float timeout = 1;
usrp->set_time_now(uhd::time_spec_t(0.0));
while(num_acc_samps < total_num_samps){
//send a single packet
num_tx_samps += tx_stream->send(buffs, max_samps_per_packet, md, timeout);
num_acc_samps += std::min(total_num_samps-num_acc_samps, tx_stream->get_max_num_samps());
}
//send a mini EOB packet
md.end_of_burst = true;
tx_stream->send("", 0, md);
}
}
/***********************************************************************
* tx_worker function
* A function to be used in its own thread for transmitting. Push all
* tx values into the USRP buffer as USRP buffer space is available,
* but allow other actions to occur concurrently.
**********************************************************************/
void tx_worker(
unsigned int bufflen,
uhd::tx_streamer::sptr tx_stream,
uhd::time_spec_t start_time,
std::complex<int16_t>* vec_ptr,
int end
){
unsigned int acc_samps = 0;
uhd::tx_metadata_t md;
md.start_of_burst = true;
md.has_time_spec = true;
md.time_spec = start_time;
size_t spb = tx_stream->get_max_num_samps();
if (spb > bufflen) spb = bufflen;
while(acc_samps < bufflen-spb){
size_t nsamples = tx_stream->send(vec_ptr, spb, md);
vec_ptr += spb;
acc_samps += nsamples;
//std::cout << acc_samps <<std::endl;
md.start_of_burst = false;
md.has_time_spec = false;
}
// Now on the last packet
if (end) md.end_of_burst = true;
spb = bufflen - acc_samps;
size_t nsamples = tx_stream->send(vec_ptr, spb, md);
}
/***********************************************************************
* Benchmark TX Rate
**********************************************************************/
void benchmark_tx_rate(
uhd::usrp::multi_usrp::sptr usrp,
const std::string &tx_cpu,
uhd::tx_streamer::sptr tx_stream,
std::atomic<bool>& burst_timer_elapsed,
const boost::posix_time::ptime &start_time,
bool random_nsamps=false
) {
uhd::set_thread_priority_safe();
//print pre-test summary
std::cout << boost::format(
"[%s] Testing transmit rate %f Msps on %u channels"
) % NOW() % (usrp->get_tx_rate()/1e6) % tx_stream->get_num_channels() << std::endl;
//setup variables and allocate buffer
uhd::tx_metadata_t md;
md.time_spec = usrp->get_time_now() + uhd::time_spec_t(INIT_DELAY);
md.has_time_spec = (tx_stream->get_num_channels() > 1);
const size_t max_samps_per_packet = tx_stream->get_max_num_samps();
std::vector<char> buff(max_samps_per_packet*uhd::convert::get_bytes_per_item(tx_cpu));
std::vector<const void *> buffs;
for (size_t ch = 0; ch < tx_stream->get_num_channels(); ch++)
buffs.push_back(&buff.front()); //same buffer for each channel
md.has_time_spec = (buffs.size() != 1);
if (random_nsamps) {
std::srand((unsigned int)time(NULL));
while (not burst_timer_elapsed) {
size_t total_num_samps = rand() % max_samps_per_packet;
size_t num_acc_samps = 0;
const float timeout = 1;
usrp->set_time_now(uhd::time_spec_t(0.0));
while(num_acc_samps < total_num_samps){
//send a single packet
num_tx_samps += tx_stream->send(buffs, max_samps_per_packet, md, timeout)*tx_stream->get_num_channels();
num_acc_samps += std::min(total_num_samps-num_acc_samps, tx_stream->get_max_num_samps());
}
}
} else {
while (not burst_timer_elapsed) {
const size_t num_tx_samps_sent_now = tx_stream->send(buffs, max_samps_per_packet, md)*tx_stream->get_num_channels();
num_tx_samps += num_tx_samps_sent_now;
if (num_tx_samps_sent_now == 0) {
num_timeouts_tx++;
if ((num_timeouts_tx % 10000) == 1) {
std::cerr << "[" << NOW() << "] Tx timeouts: " << num_timeouts_tx << std::endl;
}
}
md.has_time_spec = false;
}
}
//send a mini EOB packet
md.end_of_burst = true;
tx_stream->send(buffs, 0, md);
}
void tx_hammer_async_helper(uhd::tx_streamer::sptr tx_stream){
//setup variables and allocate buffer
uhd::async_metadata_t async_md;
while (not boost::this_thread::interruption_requested()){
if (not tx_stream->recv_async_msg(async_md)) continue;
//handle the error codes
switch(async_md.event_code){
case uhd::async_metadata_t::EVENT_CODE_BURST_ACK:
return;
case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW:
case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET:
num_underflows++;
break;
case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR:
case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST:
num_seq_errors++;
break;
default:
std::cerr << "Event code: " << async_md.event_code << std::endl;
std::cerr << "Unexpected event on async recv, continuing..." << std::endl;
break;
}
}
}
/*!
* Test the burst ack message:
* Send a burst of many samples that will fragment internally.
* We expect to get an burst ack async message.
*/
bool test_burst_ack_message(uhd::usrp::multi_usrp::sptr, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){
std::cout << "Test burst ack message... " << std::flush;
uhd::tx_metadata_t md;
md.start_of_burst = true;
md.end_of_burst = true;
md.has_time_spec = false;
//3 times max-sps guarantees a SOB, no burst, and EOB packet
std::vector<std::complex<float> > buff(tx_stream->get_max_num_samps()*3);
tx_stream->send(
&buff.front(), buff.size(), md
);
uhd::async_metadata_t async_md;
if (not tx_stream->recv_async_msg(async_md)){
std::cout << boost::format(
"failed:\n"
" Async message recv timed out.\n"
) << std::endl;
return false;
}
switch(async_md.event_code){
case uhd::async_metadata_t::EVENT_CODE_BURST_ACK:
std::cout << boost::format(
"success:\n"
" Got event code burst ack message.\n"
) << std::endl;
return true;
default:
std::cout << boost::format(
"failed:\n"
" Got unexpected event code 0x%x.\n"
) % async_md.event_code << std::endl;
return false;
}
}
/*!
* Test the time error message:
* Send a burst packet that occurs at a time in the past.
* We expect to get a time error async message.
*/
bool test_time_error_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){
std::cout << "Test time error message... " << std::flush;
uhd::tx_metadata_t md;
md.start_of_burst = true;
md.end_of_burst = true;
md.has_time_spec = true;
md.time_spec = uhd::time_spec_t(100.0); //send at 100s
usrp->set_time_now(uhd::time_spec_t(200.0)); //time at 200s
tx_stream->send("", 0, md);
uhd::async_metadata_t async_md;
if (not tx_stream->recv_async_msg(async_md)){
std::cout << boost::format(
"failed:\n"
" Async message recv timed out.\n"
) << std::endl;
return false;
}
switch(async_md.event_code){
case uhd::async_metadata_t::EVENT_CODE_TIME_ERROR:
std::cout << boost::format(
"success:\n"
" Got event code time error message.\n"
) << std::endl;
return true;
default:
std::cout << boost::format(
"failed:\n"
" Got unexpected event code 0x%x.\n"
) % async_md.event_code << std::endl;
return false;
}
}
/*! Returns true if any error on the TX stream has occured
*/
bool has_tx_error(uhd::tx_streamer::sptr tx_stream)
{
uhd::async_metadata_t async_md;
if (!tx_stream->recv_async_msg(async_md, 0.0)) {
return false;
}
return async_md.event_code & (0
// Any of these errors are considered a problematic TX error:
| uhd::async_metadata_t::EVENT_CODE_UNDERFLOW
| uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR
| uhd::async_metadata_t::EVENT_CODE_TIME_ERROR
| uhd::async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET
| uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST
);
}
int uhd_device::writeSamples(short *buf, int len, bool *underrun,
unsigned long long timestamp,bool isControl)
{
uhd::tx_metadata_t metadata;
metadata.has_time_spec = true;
metadata.start_of_burst = false;
metadata.end_of_burst = false;
metadata.time_spec = convert_time(timestamp, tx_rate);
*underrun = false;
// No control packets
if (isControl) {
LOG(ERR) << "Control packets not supported";
return 0;
}
// Drop a fixed number of packets (magic value)
if (!aligned) {
drop_cnt++;
if (drop_cnt == 1) {
LOG(DEBUG) << "Aligning transmitter: stop burst";
*underrun = true;
metadata.end_of_burst = true;
} else if (drop_cnt < 30) {
LOG(DEBUG) << "Aligning transmitter: packet advance";
return len;
} else {
LOG(DEBUG) << "Aligning transmitter: start burst";
metadata.start_of_burst = true;
aligned = true;
drop_cnt = 0;
}
}
size_t num_smpls = tx_stream->send(buf, len, metadata);
if (num_smpls != (unsigned) len) {
LOG(ALERT) << "UHD: Device send timed out";
LOG(ALERT) << "UHD: Version " << uhd::get_version_string();
LOG(ALERT) << "UHD: Unrecoverable error, exiting...";
exit(-1);
}
return num_smpls;
}
void benchmark_tx_rate_async_helper(
uhd::tx_streamer::sptr tx_stream,
const boost::posix_time::ptime &start_time,
std::atomic<bool>& burst_timer_elapsed
) {
//setup variables and allocate buffer
uhd::async_metadata_t async_md;
bool exit_flag = false;
while (true) {
if (burst_timer_elapsed) {
exit_flag = true;
}
if (not tx_stream->recv_async_msg(async_md)) {
if (exit_flag == true)
return;
continue;
}
//handle the error codes
switch(async_md.event_code){
case uhd::async_metadata_t::EVENT_CODE_BURST_ACK:
return;
case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW:
case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET:
num_underruns++;
break;
case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR:
case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST:
num_seq_errors++;
break;
default:
std::cerr << "[" << NOW() << "] Event code: " << async_md.event_code << std::endl;
std::cerr << "Unexpected event on async recv, continuing..." << std::endl;
break;
}
}
}
void flush_async(uhd::tx_streamer::sptr tx_stream){
uhd::async_metadata_t async_md;
while (tx_stream->recv_async_msg(async_md)){}
}
void thread_startTx(){
num_tx_samps = tx_stream->send(&small_tx_buff.front(), small_tx_buff.size(), tx_md);
}
int UHD_SAFE_MAIN(int argc, char *argv[]){
uhd::set_thread_priority_safe();
std::string args, tx_file, rx_file, type, ref, wire_format, cpu_format;
double rate, freq, tx_gain, rx_gain, rx_bw, delay, lo_off,seconds_in_future, rx_timeout;
rx_bw = RX_BW;
rx_gain = RX_GAIN;
wire_format = WIRE_FORMAT;
cpu_format = CPU_FORMAT;
rate = SAMP_RATE;
args = ARGS;
ref = REF_CLOCK;
freq = CENT_FREQ;
tx_gain = TX_GAIN;
// samples_per_buff = SAMPLES_PER_BUFFER;
tx_file = TX_FILENAME;
rx_file = RX_FILENAME;
seconds_in_future = SYNCH_DELAY;
rx_timeout = RX_TIMEOUT;
//------------------INIT TX------------------
//Set the scheduling priority on the current thread. Same as set_thread_priority but does not throw on failure.
std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl;
uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); //Make the usrp by calling the constructor with param the args
usrp->set_clock_source(ref); //Set the clock source for the usrp device. This sets the source for a 10 MHz reference clock. Typical options for source: internal, external, MIMO.
std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl;
usrp->set_tx_rate(rate); //Set the sample rate
std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl;
std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; //Set up tuning frequency
uhd::tune_request_t tune_request;
tune_request = uhd::tune_request_t(freq); //Generate the tune request
usrp->set_tx_freq(tune_request); //Tune to CENT_FREQ
std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; //PRINT Actual CENT_FREQ
std::cout << boost::format("Setting TX Gain: %f dB...") % tx_gain << std::endl;
usrp->set_tx_gain(tx_gain); //Set the tx_gain
std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain() << std::endl << std::endl;
//------------------CHECK STUFF------------------
//Check Ref and LO Lock detect
std::vector<std::string> sensor_names;
sensor_names = usrp->get_tx_sensor_names(0);
if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) {
uhd::sensor_value_t lo_locked = usrp->get_tx_sensor("lo_locked",0);
std::cout << boost::format("Checking TX: %s ...") % lo_locked.to_pp_string() << std::endl;
UHD_ASSERT_THROW(lo_locked.to_bool());
}
//------------------INIT RX------------------
//IS THIS NECESSARY?
//always select the subdevice first, the channel mapping affects the other settings
//usrp->set_rx_subdev_spec(subdev);
std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl;
usrp->set_rx_rate(rate);
std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl;
//set the center frequency
std::cout << boost::format("Setting RX Freq: %f MHz...") % (freq/1e6) << std::endl;
usrp->set_rx_freq(tune_request);
std::cout << boost::format("Actual RX Freq: %f MHz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl;
std::cout << boost::format("Setting RX Gain: %f dB...") % rx_gain << std::endl;
usrp->set_rx_gain(rx_gain);
std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl;
boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow 1sec setup time
//------------------CHECK STUFF------------------
//Always check for locked sensor
check_locked_sensor(usrp->get_rx_sensor_names(0), "lo_locked", boost::bind(&uhd::usrp::multi_usrp::get_rx_sensor, usrp, _1, 0), 1);
//------------------INIT FILES---------------
std::ofstream outfile;
outfile.open(rx_file.c_str(), std::ofstream::binary);
if(!outfile.good()){
std::cout << "OUT File error\n";
return 0;
}
std::ifstream infile(tx_file.c_str(), std::ifstream::binary);
if(!infile.good()){
std::cout << "IN File error\n";
return 0;
}
//------------------INIT STREAMS---------------
//Stream ARGS
uhd::stream_args_t stream_args(cpu_format, wire_format); //Call the constructor of the class stream_args_t and generate the stream_args object with inputs the cpu_format and wire_format (this is the format per sample)
tx_stream = usrp->get_tx_stream(stream_args); //Generate a tx_streamer object named tx_stream using the usrp->get_tx_stream(stream_args). Remember, usrp is already initialized
uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); //Generate a tx_streamer object named tx_stream using the usrp->get_tx_stream(stream_args). Remember, usrp is already initialized
//Setup metadata
//Setup tx_metadata
tx_md.start_of_burst = true; //Set start of burst to true for the first packet in the chain. ?
tx_md.end_of_burst = false;
#define SYNCHED_TXRX 1
//For TX
if(SYNCHED_TXRX){
tx_md.has_time_spec = true;
}else{
tx_md.has_time_spec = false;
}
//Setup rx_metadata
uhd::rx_metadata_t rx_md;
//Setup stream command ONLY FOR RX
uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
stream_cmd.num_samps = samples_per_buff;
//For RX
if(SYNCHED_TXRX){
stream_cmd.stream_now = false;
// tx_md.time_spec = stream_cmd.time_spec;
}else{
stream_cmd.stream_now = true;
stream_cmd.time_spec = uhd::time_spec_t();
}
if(SYNCHED_TXRX){
//Cannt get any faster than this
tx_md.time_spec = stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future)+usrp->get_time_now();
}
//Create the buffs
std::vector<std::complex<float> > small_rx_buff(samples_per_buff);
//Fill the TX buffer
for (int i = 0; i < samples_per_buff; ++i){
infile.read((char*)&small_tx_buff.at(i), small_tx_buff.size()*sizeof(std::complex<float>));
}
infile.close(); //Close the file pointer
//Issue the stream command
rx_stream->issue_stream_cmd(stream_cmd);
//Print number of maximum buffer size
printf("MAX TX: %d\n", (int)tx_stream->get_max_num_samps());
printf("MAX RX %d\n", (int)rx_stream->get_max_num_samps());
size_t num_rx_samps = 0;
boost::thread txThread(thread_startTx);
//receivotrnsmit
txThread.join(); //Strart the thread for tx (tx is f blocking)
num_rx_samps = rx_stream->recv(&small_rx_buff.front(), small_rx_buff.size(), rx_md, rx_timeout, false); // Receive buffers containing samples described by the metadata.
// num_rx_samps = rx_stream->recv(&small_rx_buff.front(), small_rx_buff.size(), rx_md, rx_timeout, false); // Receive buffers containing samples described by the metadata.
//Wait for everything to stop
boost::this_thread::sleep(boost::posix_time::milliseconds(2000));
//Cleanup and print what happened
usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); // Stop the stream (not really necessary here)
double rx_stamp = rx_md.time_spec.get_full_secs() + rx_md.time_spec.get_frac_secs();
double tx_stamp = tx_md.time_spec.get_full_secs() + tx_md.time_spec.get_frac_secs();
double t_diff = rx_stamp - tx_stamp;
printf("RX Time stamp: %.12lf\n ΤX Time stamp: %.12lf\n Diff: %.12lf\n",rx_stamp, tx_stamp, t_diff);
switch ( rx_md.error_code ) {
case uhd::rx_metadata_t::ERROR_CODE_NONE:
printf("No error:)\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT:
printf("MDError 2\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_LATE_COMMAND:
printf("MDError 3\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_BROKEN_CHAIN:
printf("MDError 4\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW:
printf("MDError 5\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_ALIGNMENT:
printf("MDError 6\n");
break;
case uhd::rx_metadata_t::ERROR_CODE_BAD_PACKET:
printf("MDError 7\n");
break;
default:
printf("WUT\n");
break;
}
//write the samples
if (outfile.is_open()){
outfile.write((const char*)&small_rx_buff.front(), num_rx_samps*sizeof(std::complex<float>));
}
outfile.close(); //Close the file pointer
//print
std::cout << "Transmitted samples: " << num_tx_samps << '\n';
std::cout << "Received samples: " << num_rx_samps << '\n';
return EXIT_SUCCESS;
}
int uhd_device::open(const std::string &args, bool extref)
{
// Find UHD devices
uhd::device_addr_t addr(args);
uhd::device_addrs_t dev_addrs = uhd::device::find(addr);
if (dev_addrs.size() == 0) {
LOG(ALERT) << "No UHD devices found with address '" << args << "'";
return -1;
}
// Use the first found device
LOG(INFO) << "Using discovered UHD device " << dev_addrs[0].to_string();
try {
usrp_dev = uhd::usrp::multi_usrp::make(dev_addrs[0]);
} catch(...) {
LOG(ALERT) << "UHD make failed, device " << dev_addrs[0].to_string();
return -1;
}
// Check for a valid device type and set bus type
if (!parse_dev_type())
return -1;
if (extref)
set_ref_clk(true);
// Create TX and RX streamers
uhd::stream_args_t stream_args("sc16");
tx_stream = usrp_dev->get_tx_stream(stream_args);
rx_stream = usrp_dev->get_rx_stream(stream_args);
// Number of samples per over-the-wire packet
tx_spp = tx_stream->get_max_num_samps();
rx_spp = rx_stream->get_max_num_samps();
// Set rates
double _tx_rate = select_rate(dev_type, sps);
double _rx_rate = _tx_rate / sps;
if ((_tx_rate > 0.0) && (set_rates(_tx_rate, _rx_rate) < 0))
return -1;
// Create receive buffer
size_t buf_len = SAMPLE_BUF_SZ / sizeof(uint32_t);
rx_smpl_buf = new smpl_buf(buf_len, rx_rate);
// Set receive chain sample offset
double offset = get_dev_offset(dev_type, sps);
if (offset == 0.0) {
LOG(ERR) << "Unsupported configuration, no correction applied";
ts_offset = 0;
} else {
ts_offset = (TIMESTAMP) (offset * rx_rate);
}
// Initialize and shadow gain values
init_gains();
// Print configuration
LOG(INFO) << "\n" << usrp_dev->get_pp_string();
switch (dev_type) {
case B100:
return RESAMP_64M;
case USRP2:
case X3XX:
return RESAMP_100M;
}
return NORMAL;
}
void transceive(
uhd::usrp::multi_usrp::sptr usrp,
uhd::tx_streamer::sptr tx_stream,
uhd::rx_streamer::sptr rx_stream,
unsigned int npulses,
float pulse_time,
//std::complex<int16_t>* txbuff,
std::vector<std::complex<int16_t> >* txbuff0,
std::vector<std::complex<int16_t> >* txbuff1,
float tx_ontime,
std::complex<int16_t>** outdata,
size_t samps_per_pulse
){
int debug = 0;
if (debug){
std::cout << "samps_per_pulse: " << samps_per_pulse << std::endl;
}
//create metadeta tags for transmit streams
uhd::time_spec_t start_time = usrp->get_time_now() + 0.05;
uhd::tx_metadata_t md;
md.start_of_burst = true;
md.end_of_burst = false;
md.has_time_spec = true;
md.time_spec = start_time;
std::vector<std::complex<int16_t> *> vec_ptr;
vec_ptr.resize(1);
//vec_ptr[0] = &txbuff->front();
usrp->set_gpio_attr("RXA","CTRL",0x0, TR_BIT); //GPIO mode
usrp->set_gpio_attr("RXA","DDR",TR_BIT, TR_BIT); //Direction out
//create metadata tags for receive stream
uhd::rx_metadata_t rxmd;
std::vector<std::complex<int16_t> > buff(samps_per_pulse,0);
if (verbose) std::cout << "rx buff size: " << buff.size() << std::endl;
if (verbose) std::cout << "tx buff size: " << txbuff0->size() << std::endl;
uhd::stream_cmd_t stream_cmd = uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE;
stream_cmd.num_samps = npulses*samps_per_pulse;
stream_cmd.stream_now = false;
stream_cmd.time_spec = start_time + 22 / usrp->get_rx_rate(); //Digital hardware delay is 22 samples long. Found by experiment.
if (verbose) std::cout << "time spec: " << stream_cmd.time_spec.get_real_secs() << std::endl;
//loop for every pulse in the sequence
size_t spb;
std::vector<std::complex<int16_t>* > rx_dptr;
rx_dptr.resize(usrp->get_rx_num_channels());
spb = tx_stream->get_max_num_samps();
if (verbose) std::cout << "npulses: " << npulses << std::endl;
boost::thread_group rx_threads;
boost::thread_group tx_threads;
for (int ipulse=0; ipulse<npulses; ipulse++){
if (debug) std::cout << "pulse number: " << ipulse << std::endl;
for (size_t ichan=0; ichan<usrp->get_rx_num_channels(); ichan++){
rx_dptr[ichan] = ipulse*samps_per_pulse + outdata[ichan];
}
float timeout = 1.1;
//usrp->set_command_time(start_time-50e-6,0);
//usrp->set_gpio_attr("RXA","OUT",TR_BIT, TR_BIT);
if (ipulse==0){
if (verbose) std::cout << "time spec: " << stream_cmd.time_spec.get_real_secs() << std::endl;
if (verbose) std::cout << "Issuing stream command to start collecting samples\n";
usrp->issue_stream_cmd(stream_cmd);
}
//usrp->set_command_time(start_time+tx_ontime,0);
//usrp->set_gpio_attr("RXA","OUT",0x0, TR_BIT);
size_t acc_samps=0;
if (ipulse%2 == 0) {
vec_ptr[0] = &txbuff0->front();
}
if (ipulse%2 == 1) {
vec_ptr[0] = &txbuff1->front();
}
if (ipulse != npulses-1) {
tx_threads.create_thread(boost::bind(tx_worker,
txbuff0->size(), tx_stream, start_time, vec_ptr[0], 0));
}
if (ipulse == npulses-1) {
tx_threads.create_thread(boost::bind(tx_worker,
txbuff0->size(), tx_stream, start_time, vec_ptr[0], 1));
}
rx_threads.join_all();
rx_threads.create_thread(boost::bind(rx_worker,
rx_stream, samps_per_pulse, rx_dptr));
//for (int k=0; k<10; k++){
// //std::cout << "raw data: " << outdata[0][i][k] << "\t" << outdata[1][i][k] << std::endl;
// std::cout << "raw data: " << rx_dptr[0][k] << " " << rx_dptr[1][k] << std::endl;
//}
//for (int k=0; k<samps_per_pulse; k++)
// outdata[i][k] += buff[k];
start_time += float(pulse_time);
}
tx_threads.join_all();
rx_threads.join_all();
}