Пример #1
1
void get_rx_parameters(uhd::usrp::multi_usrp::sptr usrp, size_t mboard , std::ostream & os)
{
	using namespace std;
	namespace radio = uhd::usrp;
	size_t nchan = 0;

	// Get sub device specification
	os << std::endl << "********** RX Sub Device ***********" << std::endl;
	os << std::endl << "-----> Get Rx Subdevice" << std::endl;
	radio::subdev_spec_t rx_subdev = usrp->get_rx_subdev_spec(mboard);
	os << "RX Subdevice Specification:" << endl;
	os << rx_subdev.to_pp_string() << endl;
	
	os << std::endl << "-----> Get number of RX channels" << std::endl;
	size_t num_rx = usrp->get_rx_num_channels();
	os << "Number of RX channels:" << endl;
	os << num_rx << endl;
	
	os << std::endl << "-----> Get RX Subdevice Name" << std::endl;
	string rx_name = usrp->get_rx_subdev_name(nchan);
	os << "RX Subdevice Name:" << endl;
	os << rx_name << endl;

	os << std::endl << "********** RX Sample Rate ***********" << std::endl;
	os << std::endl << "-----> Get RX Rate" << std::endl;
	double rx_rate = usrp->get_rx_rate(nchan);
	os << "RX Rate:" << endl;
	os << rx_rate << endl;
	
	os << std::endl << "-----> Get RX Rate List" << std::endl;
	uhd::meta_range_t rx_rates = usrp->get_rx_rates(nchan);
	os << "RX Rate List:" << endl;
	os << "Start: " << rx_rates.start() << "   Stop: " << rx_rates.stop() << "   Step: " << rx_rates.step() << endl;
	os << rx_rates.to_pp_string() << endl;
	
	// RX FREQUENCIES
	
	os << std::endl << "********** RX Frequencies ***********" << std::endl;
	os << std::endl << "-----> Get RX Center Frequency" << std::endl;
	double rx_freq = usrp->get_rx_freq(nchan);
	os << "RX Freq:" << endl;
	os << rx_freq << endl;

	os << std::endl << "-----> Get RX Center Frequency Range" << std::endl;
	uhd::freq_range_t rx_freq_range = usrp->get_rx_freq_range(nchan);
	os << "RX Frequency Range:" << endl;
	os << "Start: " << rx_freq_range.start() << "   Stop: " << rx_freq_range.stop() << "   Step: " << rx_freq_range.step() << endl;
	os << rx_freq_range.to_pp_string() << endl;
	
	// RX Front end frequencies
	os << std::endl << "-----> Get RX RF Front End Center Frequency Range" << std::endl;
	try
	{
		os << "RX Front End Frequency Range:" << endl;
		uhd::freq_range_t rx_fe_freq_range = usrp->get_fe_rx_freq_range(nchan);
		os << "Start: " << rx_fe_freq_range.start() << "   Stop: " << rx_fe_freq_range.stop() << "   Step: " << rx_fe_freq_range.step() << endl;
		os << rx_fe_freq_range.to_pp_string() << endl;
	}
		catch (uhd::runtime_error &e)
	{
		os << " Exception occurred : " << e.code() << endl;
	}
	
	// RX GAIN
	
	os << std::endl << "********** RX Gain  ***********" << std::endl;
	
	// Total combined gain
	os << endl << "-----> Get RX Total Gain" << endl;
	os << "RX Total Gain: " ;	
	try
	{
		double rx_total_gain = usrp->get_rx_gain(nchan);
		os << rx_total_gain << endl;
	}
	catch(uhd::runtime_error &e)
	{
		os << "Exception code: " << e.code() << endl;
	}
	
	// List of all gain elements
	os << std::endl << "-----> Get RX gain names" << std::endl;
	std::vector<std::string> rx_gain_names = usrp->get_rx_gain_names(nchan);
	os << "Rx Gain Names: " << std::endl;
	for (int index =0; index < rx_gain_names.size(); index++)
	{
		// Name
		os << "\t" << rx_gain_names[index] << endl;
	}
	for (int index =0; index < rx_gain_names.size(); index++)
	{
		// Name
		os << "\t" << "Name: " << rx_gain_names[index] << "  Value: ";
		// Value
		try
		{
		double element_gain = usrp->get_rx_gain(rx_gain_names[index], nchan);
		os << element_gain << endl;
		}
		catch(uhd::runtime_error &e)
		{
			os << "Exception code while getting value: " << e.code() << endl;
		}
	}

	// Gain ranges for each of the gain elements
	os << std::endl << "-----> Get RX element gain ranges" << std::endl;
	for (int index =0; index < rx_gain_names.size(); index++)
	{
		// Name
		os << "\t" << "Name: " << rx_gain_names[index] << "  Value: ";
		// Value
		try
		{
		uhd::gain_range_t element_gain_range = usrp->get_rx_gain_range(rx_gain_names[index], nchan);
		os << "Start: " << element_gain_range.start() << " End: " << element_gain_range.stop() << " Step: " << element_gain_range.step() << endl;
		}
		catch(uhd::runtime_error &e)
		{
			os << "Exception code while getting value: " << e.code() << endl;
		}
	}

	// Total Gain range
	try
	{
		os << endl << "-----> Get RX Total Gain Range" << endl;
		uhd::gain_range_t rx_total_gain_range = usrp->get_rx_gain_range(nchan);
		os << "RX Total Gain Range: " ;
		os << "Start: " << rx_total_gain_range.start() << " End: " << rx_total_gain_range.stop() << " Step: " << rx_total_gain_range.step() << endl;
	}
	catch(uhd::runtime_error &e)
	{
		os << "Exception code: " << e.code() <<endl;
	}
	
	// ANTENNA FUNCTIONS
	
	os << std::endl << "********** RX ANTENNA ***********" << std::endl;
	// Current Rx Antenna
	os << std::endl << "-----> Get RX Antenna" << std::endl;
	string rx_antenna = usrp->get_rx_antenna(nchan);
	os << "RX Antenna: " ;
	os << rx_antenna << endl;

	// RX Antenna choices
	os << std::endl << "-----> Get Rx Antenna List" << std::endl;
	std::vector<std::string> rx_antennas = usrp->get_rx_antennas(nchan);
	os << "RX Antennas : " << std::endl;
	for (int index =0; index < rx_antennas.size(); index++)
		os << "\t" << rx_antennas[index] << std::endl;
		
		
	// RX BANDWIDTH FUNCTIONS

	os << std::endl << "********** RX BANDWIDTH ***********" << std::endl;
	// Current RX Bandwidth
	os << endl << "-----> Get RX Bandwidth" << endl;
	try
	{
		os << "RX Bandwidth " ;
		double rx_bandwidth = usrp->get_rx_bandwidth(nchan);
		os << rx_bandwidth << endl;
	}
	catch (uhd::runtime_error &e)
	{
		os << "Exception occured " << e.code() << endl;
	}
	
	// RX Bandwidth Range
	os << endl << "-----> Get RX Bandwidth Range" << endl;
	try
	{
		os << "RX Bandwidth Range: " ;
		uhd::gain_range_t rx_bandwidth_range = usrp->get_rx_bandwidth_range(nchan);
		os << "Start: " << rx_bandwidth_range .start() << " End: " << rx_bandwidth_range .stop() << " Step: " << rx_bandwidth_range .step() << endl;
	}
	catch(uhd::runtime_error &e)
	{
		os << "Exception code: " << e.code() <<endl;
	}
	
	// RX DBOARD INTERFACE OBJECT

	os << std::endl << "********** RX DBOARD INTERFACE ***********" << std::endl;
	// RX Dboard Interface
	os << endl << "-----> Get rx_dboard_iface()" << endl;
	try
	{
		os << "RX Dboard Interface " ;
		uhd::usrp::dboard_iface::sptr rx_dboard_iface = usrp->get_rx_dboard_iface(nchan);
		os << rx_dboard_iface << endl;
	}
	catch (uhd::runtime_error &e)
	{
		os << "Exception occured " << e.code() << endl;
	}
	
	// RX _SENSORS

	os << std::endl << "********** RX Sensors  ***********" << std::endl;

	// List of all available sensors
	os << std::endl << "-----> Get RX Sensors Name" << std::endl;
	std::vector<std::string> rx_sensor_names = usrp->get_rx_sensor_names(nchan);
	os << "Sensor Names: " << std::endl;
	for (int index =0; index < rx_sensor_names.size(); index++)
	{
		// Name
		os << "\t" << rx_sensor_names[index] << ":  ";
		// Value
		try
		{
			uhd::sensor_value_t rx_sensor_value = usrp->get_rx_sensor(rx_sensor_names[index], nchan);
			os << rx_sensor_value.to_pp_string()<< std::endl;
		}
		catch(uhd::runtime_error &e)
		{
			os << "Exception occured " << e.code() << endl;
		}
	}
	

}
Пример #2
0
/***********************************************************************
 * Retrieve d'board serial
 **********************************************************************/
static std::string get_serial(
    uhd::usrp::multi_usrp::sptr usrp,
    const std::string &tx_rx)
{
    uhd::property_tree::sptr tree = usrp->get_device()->get_tree();
    // Will work on 1st subdev, top-level must make sure it's the right one
    uhd::usrp::subdev_spec_t subdev_spec = usrp->get_rx_subdev_spec();
    const uhd::fs_path db_path = "/mboards/0/dboards/" + subdev_spec[0].db_name + "/" + tx_rx + "_eeprom";
    const uhd::usrp::dboard_eeprom_t db_eeprom = tree->access<uhd::usrp::dboard_eeprom_t>(db_path).get();
    return db_eeprom.serial;
}
Пример #3
0
/***********************************************************************
 * Check for empty serial
 **********************************************************************/
void check_for_empty_serial(uhd::usrp::multi_usrp::sptr usrp)
{
    // Will work on 1st subdev, top-level must make sure it's the right one
    uhd::usrp::subdev_spec_t subdev_spec = usrp->get_rx_subdev_spec();

    //extract eeprom
    uhd::property_tree::sptr tree = usrp->get_device()->get_tree();
    // This only works with transceiver boards, so we can always check rx side
    const uhd::fs_path db_path = "/mboards/0/dboards/" + subdev_spec[0].db_name + "/rx_eeprom";
    const uhd::usrp::dboard_eeprom_t db_eeprom = tree->access<uhd::usrp::dboard_eeprom_t>(db_path).get();

    std::string error_string = "This dboard has no serial!\n\nPlease see the Calibration documentation for details on how to fix this.";
    if (db_eeprom.serial.empty())
        throw std::runtime_error(error_string);
}
Пример #4
-1
/***********************************************************************
 * Set standard defaults for devices
 **********************************************************************/
static inline void set_optimum_defaults(uhd::usrp::multi_usrp::sptr usrp){
    uhd::property_tree::sptr tree = usrp->get_device()->get_tree();
    // Will work on 1st subdev, top-level must make sure it's the right one
    uhd::usrp::subdev_spec_t subdev_spec = usrp->get_rx_subdev_spec();

    const uhd::fs_path mb_path = "/mboards/0";
    const std::string mb_name = tree->access<std::string>(mb_path / "name").get();
    if (mb_name.find("USRP2") != std::string::npos or mb_name.find("N200") != std::string::npos or mb_name.find("N210") != std::string::npos  or mb_name.find("X300") != std::string::npos  or mb_name.find("X310") != std::string::npos){
        usrp->set_tx_rate(12.5e6);
        usrp->set_rx_rate(12.5e6);
    }
    else if (mb_name.find("B100") != std::string::npos){
        usrp->set_tx_rate(4e6);
        usrp->set_rx_rate(4e6);
    }
    else if (mb_name.find("E100") != std::string::npos or mb_name.find("E110") != std::string::npos){
        usrp->set_tx_rate(4e6);
        usrp->set_rx_rate(8e6);
    }
    else{
        throw std::runtime_error("self-calibration is not supported for this hardware");
    }

    const uhd::fs_path tx_fe_path = "/mboards/0/dboards/" + subdev_spec[0].db_name + "/tx_frontends/0";
    const std::string tx_name = tree->access<std::string>(tx_fe_path / "name").get();
    if (tx_name.find("WBX") != std::string::npos){
        usrp->set_tx_gain(0);
    }
    else if (tx_name.find("SBX") != std::string::npos){
        usrp->set_tx_gain(0);
    }
    else if (tx_name.find("CBX") != std::string::npos){
        usrp->set_tx_gain(0);
    }
    else if (tx_name.find("RFX") != std::string::npos){
        usrp->set_tx_gain(0);
    }
    else{
        throw std::runtime_error("self-calibration is not supported for this hardware");
    }

    const uhd::fs_path rx_fe_path = "/mboards/0/dboards/" + subdev_spec[0].db_name + "/rx_frontends/0";
    const std::string rx_name = tree->access<std::string>(rx_fe_path / "name").get();
    if (rx_name.find("WBX") != std::string::npos){
        usrp->set_rx_gain(25);
    }
    else if (rx_name.find("SBX") != std::string::npos){
        usrp->set_rx_gain(25);
    }
    else if (rx_name.find("CBX") != std::string::npos){
        usrp->set_rx_gain(25);
    }
    else if (rx_name.find("RFX") != std::string::npos){
        usrp->set_rx_gain(25);
    }
    else{
        throw std::runtime_error("self-calibration is not supported for this hardware");
    }

}